| Age | Commit message (Collapse) | Author |
|---|
|
If the temporarily applied memory is used to set or get the xqc
information, the driver releases the memory immediately after the
hardware mailbox operation time exceeds the driver waiting time.
However, the hardware does not cancel the operation, so the hardware
may write data to released memory.
Therefore, when the driver is bound to a device, the driver reserves
memory for the xqc configuration. The subsequent xqc configuration
uses the reserved memory to prevent hardware from accessing the
released memory.
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for
array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
As found with Coccinelle[1], add __counted_by for struct ff_device.
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20231006201739.work.350-kees@kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The code pattern of memcpy(dst, src, strlen(src)) is almost always
wrong. In this case it is wrong because it leaves memory uninitialized
if it is less than sizeof(ni->name), and overflows ni->name when longer.
Normally strtomem_pad() could be used here, but since ni->name is a
trailing array in struct hci_mon_new_index, compilers that don't support
-fstrict-flex-arrays=3 can't tell how large this array is via
__builtin_object_size(). Instead, open-code the helper and use sizeof()
since it will work correctly.
Additionally mark ni->name as __nonstring since it appears to not be a
%NUL terminated C string.
Cc: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Cc: Edward AD <twuufnxlz@gmail.com>
Cc: Marcel Holtmann <marcel@holtmann.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: linux-bluetooth@vger.kernel.org
Cc: netdev@vger.kernel.org
Fixes: 18f547f3fc07 ("Bluetooth: hci_sock: fix slab oob read in create_monitor_event")
Link: https://lore.kernel.org/lkml/202310110908.F2639D3276@keescook/
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
As reported by Tom, .NET and applications build on top of it rely
on connect(AF_UNSPEC) to async cancel pending I/O operations on TCP
socket.
The blamed commit below caused a regression, as such cancellation
can now fail.
As suggested by Eric, this change addresses the problem explicitly
causing blocking I/O operation to terminate immediately (with an error)
when a concurrent disconnect() is executed.
Instead of tracking the number of threads blocked on a given socket,
track the number of disconnect() issued on such socket. If such counter
changes after a blocking operation releasing and re-acquiring the socket
lock, error out the current operation.
Fixes: 4faeee0cf8a5 ("tcp: deny tcp_disconnect() when threads are waiting")
Reported-by: Tom Deseyn <tdeseyn@redhat.com>
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=1886305
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/f3b95e47e3dbed840960548aebaa8d954372db41.1697008693.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fix spelling of "Structure".
Fix multiple kernel-doc warnings:
clk-provider.h:269: warning: Function parameter or member 'recalc_rate' not described in 'clk_ops'
clk-provider.h:468: warning: Function parameter or member 'parent_data' not described in 'clk_hw_register_fixed_rate_with_accuracy_parent_data'
clk-provider.h:468: warning: Excess function parameter 'parent_name' description in 'clk_hw_register_fixed_rate_with_accuracy_parent_data'
clk-provider.h:482: warning: Function parameter or member 'parent_data' not described in 'clk_hw_register_fixed_rate_parent_accuracy'
clk-provider.h:482: warning: Excess function parameter 'parent_name' description in 'clk_hw_register_fixed_rate_parent_accuracy'
clk-provider.h:687: warning: Function parameter or member 'flags' not described in 'clk_divider'
clk-provider.h:1164: warning: Function parameter or member 'flags' not described in 'clk_fractional_divider'
clk-provider.h:1164: warning: Function parameter or member 'approximation' not described in 'clk_fractional_divider'
clk-provider.h:1213: warning: Function parameter or member 'flags' not described in 'clk_multiplier'
Fixes: 9fba738a53dd ("clk: add duty cycle support")
Fixes: b2476490ef11 ("clk: introduce the common clock framework")
Fixes: 2d34f09e79c9 ("clk: fixed-rate: Add support for specifying parents via DT/pointers")
Fixes: f5290d8e4f0c ("clk: asm9260: use parent index to link the reference clock")
Fixes: 9d9f78ed9af0 ("clk: basic clock hardware types")
Fixes: e2d0e90fae82 ("clk: new basic clk type for fractional divider")
Fixes: f2e0a53271a4 ("clk: Add a basic multiplier clock")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-clk@vger.kernel.org
Link: https://lore.kernel.org/r/20230930221428.18463-1-rdunlap@infradead.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Mike Christie <michael.christie@oracle.com> says:
The following patches were made over Linus's tree but apply over
Martin's branches. They allow userspace to configure how fabric
drivers submit cmds to backend drivers.
Right now loop and vhost use a worker thread, and the other drivers
submit from the contexts they receive/process the cmd from. For
multiple LUN cases where the target can queue more cmds than the
backend can handle then deferring to a worker thread is safest because
the backend driver can block when doing things like waiting for a free
request/tag. Deferring also helps when the target has to handle
transport level requests from the recv context.
For cases where the backend devices can queue everything the target
sends, then there is no need to defer to a workqueue and you can see a
perf boost of up to 26% for small IO workloads. For a nvme device and
vhost-scsi I can see with 4K IOs:
fio jobs 1 2 4 8 10
--------------------------------------------------
workqueue
submit 94K 190K 394K 770K 890K
direct
submit 128K 252K 488K 950K -
Link: https://lore.kernel.org/r/1b1f7a5c-0988-45f9-b103-dfed2c0405b1@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
target_queue_submission() is not called by drivers anymore so unexport it.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20230928020907.5730-7-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
This allows userspace to request the fabric drivers do direct submissions
if they support it. With the new device file, submit_type, users can
write 0 - 2 to control how commands are submitted to the backend:
0 - TARGET_FABRIC_DEFAULT_SUBMIT - LIO will use the fabric's default
submission type. This is the default for compat.
1 - TARGET_DIRECT_SUBMIT - LIO will submit the cmd to the backend from the
calling context if the fabric the cmd was received on supports it,
else it will use the fabric's default type.
2 - TARGET_QUEUE_SUBMIT - LIO will queue the cmd to the LIO submission
workqueue which will pass it to the backend.
When using an NVMe drive and vhost-scsi with direct submission we see
around a 20% improvement in 4K I/Os:
fio jobs 1 2 4 8 10
--------------------------------------------------
defer 94K 190K 394K 770K 890K
direct 128K 252K 488K 950K -
And when using the queueing mode, we now no longer see issues like where
the iSCSI tx thread is blocked in the block layer waiting on a tag so it
can't respond to a nop or perform I/Os for other LUs.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20230928020907.5730-6-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Move the code from transport_handle_cdb_direct() to target_submit() and
have iSCSI call target_submit().
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20230928020907.5730-5-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Move core_alua_check_nonop_delay() to transport_handle_cdb_direct() so the
iSCSI target driver doesn't have to call as many core functions
directly. We will eventually merge transport_handle_cdb_direct and
target_submit so iSCSI and the other drivers call a common function.
It will also be helpful as preparation for future changes which allow the
iSCSI target to defer command submission to the LIO submission workqueue,
because we will have a common submission function for that which will be
based on transport_handle_cdb_direct()/target_submit().
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20230928020907.5730-3-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
In some cases, like with multiple LUN targets or where the target has to
respond to transport level requests from the receiving context it can be
better to defer cmd submission to a helper thread. If the backend driver
blocks on something like request/tag allocation it can block the entire
target submission path and other LUs and transport IO on that session.
In other cases like single LUN targets with storage that can support all
the commands that the target can queue, then it's best to submit the cmd
to the backend from the target's cmd receiving context.
Subsequent commits will allow the user to config what they prefer, but
drivers like loop can't directly submit because they can be called from a
context that can't sleep. And, drivers like vhost-scsi can support direct
submission, but need to keep their default behavior of deferring execution
to avoid possible regressions where the backend can block.
Make the drivers tell LIO core if they support direct submissions and their
current default, so we can prevent users from misconfiguring the system and
initialize devices correctly.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20230928020907.5730-2-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Subsequent commits add more on/off type of settings to the
target_core_fabric_ops struct so this makes write_pending_must_be_called a
bit field instead of a bool to better organize the settings.
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Link: https://lore.kernel.org/r/20230928020907.5730-1-michael.christie@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Check cpu_mitigations_off() first to avoid calling capable() if it is off.
This can avoid unnecessary audit log.
Fixes: bc5bc309db45 ("bpf: Inherit system settings for CPU security mitigations")
Suggested-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/CAEf4Bza6UVUWqcWQ-66weZ-nMDr+TFU3Mtq=dumZFD-pSqU7Ow@mail.gmail.com/
Link: https://lore.kernel.org/bpf/20231013083916.4199-1-laoar.shao@gmail.com
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Leon Romanovsky says:
====================
This PR is collected from
https://lore.kernel.org/all/cover.1695296682.git.leon@kernel.org
This series from Patrisious extends mlx5 to support IPsec packet offload
in multiport devices (MPV, see [1] for more details).
These devices have single flow steering logic and two netdev interfaces,
which require extra logic to manage IPsec configurations as they performed
on netdevs.
[1] https://lore.kernel.org/linux-rdma/20180104152544.28919-1-leon@kernel.org/
* 'mlx5-next' of https://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Handle IPsec steering upon master unbind/bind
net/mlx5: Configure IPsec steering for ingress RoCEv2 MPV traffic
net/mlx5: Configure IPsec steering for egress RoCEv2 MPV traffic
net/mlx5: Add create alias flow table function to ipsec roce
net/mlx5: Implement alias object allow and create functions
net/mlx5: Add alias flow table bits
net/mlx5: Store devcom pointer inside IPsec RoCE
net/mlx5: Register mlx5e priv to devcom in MPV mode
RDMA/mlx5: Send events from IB driver about device affiliation state
net/mlx5: Introduce ifc bits for migration in a chunk mode
====================
Link: https://lore.kernel.org/r/20231002083832.19746-1-leon@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
An io_uring openat operation can update an audit reference count
from multiple threads resulting in the call trace below.
A call to io_uring_submit() with a single openat op with a flag of
IOSQE_ASYNC results in the following reference count updates.
These first part of the system call performs two increments that do not race.
do_syscall_64()
__do_sys_io_uring_enter()
io_submit_sqes()
io_openat_prep()
__io_openat_prep()
getname()
getname_flags() /* update 1 (increment) */
__audit_getname() /* update 2 (increment) */
The openat op is queued to an io_uring worker thread which starts the
opportunity for a race. The system call exit performs one decrement.
do_syscall_64()
syscall_exit_to_user_mode()
syscall_exit_to_user_mode_prepare()
__audit_syscall_exit()
audit_reset_context()
putname() /* update 3 (decrement) */
The io_uring worker thread performs one increment and two decrements.
These updates can race with the system call decrement.
io_wqe_worker()
io_worker_handle_work()
io_wq_submit_work()
io_issue_sqe()
io_openat()
io_openat2()
do_filp_open()
path_openat()
__audit_inode() /* update 4 (increment) */
putname() /* update 5 (decrement) */
__audit_uring_exit()
audit_reset_context()
putname() /* update 6 (decrement) */
The fix is to change the refcnt member of struct audit_names
from int to atomic_t.
kernel BUG at fs/namei.c:262!
Call Trace:
...
? putname+0x68/0x70
audit_reset_context.part.0.constprop.0+0xe1/0x300
__audit_uring_exit+0xda/0x1c0
io_issue_sqe+0x1f3/0x450
? lock_timer_base+0x3b/0xd0
io_wq_submit_work+0x8d/0x2b0
? __try_to_del_timer_sync+0x67/0xa0
io_worker_handle_work+0x17c/0x2b0
io_wqe_worker+0x10a/0x350
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/lkml/MW2PR2101MB1033FFF044A258F84AEAA584F1C9A@MW2PR2101MB1033.namprd21.prod.outlook.com/
Fixes: 5bd2182d58e9 ("audit,io_uring,io-wq: add some basic audit support to io_uring")
Signed-off-by: Dan Clash <daclash@linux.microsoft.com>
Link: https://lore.kernel.org/r/20231012215518.GA4048@linuxonhyperv3.guj3yctzbm1etfxqx2vob5hsef.xx.internal.cloudapp.net
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add suspend hook and a 'suspended' field in the 'struct tegra_bpmp'
to mark if BPMP is suspended. Also, add a 'flags' field in the
'struct tegra_bpmp_message' whose 'TEGRA_BPMP_MESSAGE_RESET' bit can be
set from the Tegra MC driver to signal that the reset of BPMP IPC
channels is required before sending MRQ to the BPMP FW. Together both
the fields allow us to handle any requests that might be sent too soon
as they can cause hang during system resume.
One case where we see BPMP requests being sent before the BPMP driver
has resumed is the memory bandwidth requests which are triggered by
onlining the CPUs during system resume. The CPUs are onlined before the
BPMP has resumed and we need to reset the BPMP IPC channels to handle
these requests.
The additional check for 'flags' is done to avoid any un-intended BPMP
IPC reset if the tegra_bpmp_transfer*() API gets called during suspend
sequence after the BPMP driver is suspended.
Fixes: f41e1442ac5b ("cpufreq: tegra194: add OPP support and set bandwidth")
Co-developed-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sumit Gupta <sumitg@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
As skcipher spawn users can no longer assume the spawn is of type
struct skcipher_alg, these helpers are no longer used. Remove them.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
As skcipher spawns can be of two different types (skcipher vs.
lskcipher), only the common fields can be accessed. Add a helper
to return the common algorithm object.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
driver_state is a flex array, but is always allocated by the tls core
to a fixed size (TLS_DRIVER_STATE_SIZE_{TX,RX}). Simplify the code by
making that size explicit so that sizeof(struct
tls_offload_context_{tx,rx}) works.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
TLS_MAX_IV_SIZE + TLS_MAX_SALT_SIZE is 20B, we don't get much benefit
in cipher_context's size and can simplify the init code a bit.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It's defined in include/net/tls.h, avoid using an overly generic name.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
TLS_MAX_REC_SEQ_SIZE is 8B, we don't get anything by using kmalloc.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The merge commit 92716869375b ("Merge branch 'br-flush-filtering'")
added support for FDB flushing in bridge driver. The following patches
will extend VXLAN driver to support FDB flushing as well. The netlink
message for bulk delete is shared between the drivers. With the existing
implementation, there is no way to prevent user from flushing with
attributes that are not supported per driver. For example, when VNI will
be added, user will not get an error for flush FDB entries in bridge
with VNI, although this attribute is not relevant for bridge.
As preparation for support of FDB flush in VXLAN driver, move the policy
to be handled in bridge driver, later a new policy for VXLAN will be
added in VXLAN driver. Do not pass 'vid' as part of ndo_fdb_del_bulk(),
as this field is relevant only for bridge.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The semantic of chip_data is a bit surprising as it's cleared when
pwm_put() is called. Also there is a big overlap with the standard driver
data.
All drivers were adapted to not make use of chip_data any more, so it can
go away.
Link: https://lore.kernel.org/r/20230705080650.2353391-9-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Instead of requiring each driver to care for assigning the owner member
of struct pwm_ops, handle that implicitly using a macro. Note that the
owner member has to be moved to struct pwm_chip, as the ops structure
usually lives in read-only memory and so cannot be modified.
The upside is that new low level drivers cannot forget the assignment and
save one line each. The pwm-crc driver didn't assign .owner, that's not
a problem in practice though as the driver cannot be compiled as a
module.
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> # Intel LPSS
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> # pwm-{bcm,brcm}*.c
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> # sun4i
Acked-by: Andi Shyti <andi.shyti@kernel.org>
Acked-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> # pwm-visconti
Acked-by: Heiko Stuebner <heiko@sntech.de> # pwm-rockchip
Acked-by: Michael Walle <michael@walle.cc> # pwm-sl28cpld
Acked-by: Neil Armstrong <neil.armstrong@linaro.org> # pwm-meson
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230804142707.412137-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
|
|
Let's start adding getters for the opaque struct gpio_device. Start with
a function allowing to retrieve the base GPIO number.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Accessing struct gpio_chip backing a GPIO device is only allowed for the
actual providers of that chip.
Similarly to how we introduced gpio_device_find() in order to replace
the abused gpiochip_find(), let's introduce a counterpart to
gpiod_to_chip() that returns a reference to the GPIO device owning the
descriptor. This is done in order to later remove gpiod_to_chip()
entirely.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Peter Rosin <peda@axentia.se>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
|
|
There are users in the kernel who need to retrieve the address of the
struct device backing the GPIO device. Currently they needlessly poke in
the internals of GPIOLIB. Add a dedicated getter function.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Typo trasmitters -> transmitters.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
|
|
Pull drm fixes from Dave Airlie:
"Weekly fixes, the core is msm and amdgpu with some scattered fixes
across vmwgfx, panel and the core stuff.
atomic-helper:
- Relax checks for unregistered connectors
dma-buf:
- Work around race condition when retrieving fence timestamp
gem:
- Avoid OOB access in BO memory range
panel:
- boe-tv101wun-ml6: Fix flickering
simpledrm:
- Fix error output
vwmgfx:
- Fix size calculation in texture-state code
- Ref GEM BOs in surfaces
msm:
- PHY/link training reset fix
- msm8998 - correct highest bank bit
- skip video mode if timing engine disabled
- check irq_of_parse_and_map return code
- add new lines to some prints
- fail atomic check for max mdp clk test
amdgpu:
- Seamless boot fix
- Fix TTM BO resource check
- SI fix for doorbell handling"
* tag 'drm-fixes-2023-10-13' of git://anongit.freedesktop.org/drm/drm:
drm/tiny: correctly print `struct resource *` on error
drm: Do not overrun array in drm_gem_get_pages()
drm/atomic-helper: relax unregistered connector check
drm/panel: boe-tv101wum-nl6: Completely pull GPW to VGL before TP term
drm/amdgpu: fix SI failure due to doorbells allocation
drm/amdgpu: add missing NULL check
drm/amd/display: Don't set dpms_off for seamless boot
drm/vmwgfx: Keep a gem reference to user bos in surfaces
drm/vmwgfx: fix typo of sizeof argument
drm/msm/dpu: fail dpu_plane_atomic_check() based on mdp clk limits
dma-buf: add dma_fence_timestamp helper
drm/msm/dp: Add newlines to debug printks
drm/msm/dpu: change _dpu_plane_calc_bw() to use u64 to avoid overflow
drm/msm/dsi: fix irq_of_parse_and_map() error checking
drm/msm/dsi: skip the wait for video mode done if not applicable
drm/msm/mdss: fix highest-bank-bit for msm8998
drm/msm/dp: do not reinitialize phy unless retry during link training
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Short summary of fixes pull:
* atomic-helper: Relax checks for unregistered connectors
* dma-buf: Work around race condition when retrieving fence timestamp
* gem: Avoid OOB access in BO memory range
* panel:
* boe-tv101wun-ml6: Fix flickering
* simpledrm: Fix error output
* vwmgfx:
* Fix size calculation in texture-state code
* Ref GEM BOs in surfaces
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20231012111638.GA25037@linux-uq9g
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup
Pull cgroup fixes from Tejun Heo:
- In cgroup1, the `tasks` file could have duplicate pids which can
trigger a warning in seq_file. Fix it by removing duplicate items
after sorting
- Comment update
* tag 'cgroup-for-6.6-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Fix incorrect css_set_rwsem reference in comment
cgroup: Remove duplicates in cgroup v1 tasks file
|
|
Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
kernel/bpf/verifier.c
829955981c55 ("bpf: Fix verifier log for async callback return values")
a923819fb2c5 ("bpf: Treat first argument as return value for bpf_throw")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from CAN and BPF.
We have a regression in TC currently under investigation, otherwise
the things that stand off most are probably the TCP and AF_PACKET
fixes, with both issues coming from 6.5.
Previous releases - regressions:
- af_packet: fix fortified memcpy() without flex array.
- tcp: fix crashes trying to free half-baked MTU probes
- xdp: fix zero-size allocation warning in xskq_create()
- can: sja1000: always restart the tx queue after an overrun
- eth: mlx5e: again mutually exclude RX-FCS and RX-port-timestamp
- eth: nfp: avoid rmmod nfp crash issues
- eth: octeontx2-pf: fix page pool frag allocation warning
Previous releases - always broken:
- mctp: perform route lookups under a RCU read-side lock
- bpf: s390: fix clobbering the caller's backchain in the trampoline
- phy: lynx-28g: cancel the CDR check work item on the remove path
- dsa: qca8k: fix qca8k driver for Turris 1.x
- eth: ravb: fix use-after-free issue in ravb_tx_timeout_work()
- eth: ixgbe: fix crash with empty VF macvlan list"
* tag 'net-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (54 commits)
rswitch: Fix imbalance phy_power_off() calling
rswitch: Fix renesas_eth_sw_remove() implementation
octeontx2-pf: Fix page pool frag allocation warning
nfc: nci: assert requested protocol is valid
af_packet: Fix fortified memcpy() without flex array.
net: tcp: fix crashes trying to free half-baked MTU probes
net/smc: Fix pos miscalculation in statistics
nfp: flower: avoid rmmod nfp crash issues
net: usb: dm9601: fix uninitialized variable use in dm9601_mdio_read
ethtool: Fix mod state of verbose no_mask bitset
net: nfc: fix races in nfc_llcp_sock_get() and nfc_llcp_sock_get_sn()
mctp: perform route lookups under a RCU read-side lock
net: skbuff: fix kernel-doc typos
s390/bpf: Fix unwinding past the trampoline
s390/bpf: Fix clobbering the caller's backchain in the trampoline
net/mlx5e: Again mutually exclude RX-FCS and RX-port-timestamp
net/smc: Fix dependency of SMC on ISM
ixgbe: fix crash with empty VF macvlan list
net/mlx5e: macsec: use update_pn flag instead of PN comparation
net: phy: mscc: macsec: reject PN update requests
...
|
|
This simplifies the macro and makes it easy to add the new seqprop's
with 2 or more args.
Plus this way we do not lose the type info, the (void*) type cast is
no longer needed.
And the latter reveals the problem: a lot of seqcount_t helpers pass
the "const seqcount_t *s" argument to __seqprop_ptr(seqcount_t *s)
but (before this patch) "(void *)(s)" masked the problem.
So this patch changes __seqprop_ptr() and __seqprop_##lockname##_ptr()
to accept the "const LOCKNAME *s" argument. This is not nice either,
they need to drop the constness on return because these helpers are used
by both the readers and writers, but at least it is clear what's going on.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Waiman Long <longman@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20231012143227.GA16143@redhat.com
|
|
1. Kill the "lockmember" argument. It is always s->lock plus
__seqprop_##lockname##_sequence() already uses s->lock and
ignores "lockmember".
2. Kill the "lock_acquire" argument. __seqprop_##lockname##_sequence()
can use the same "lockbase" prefix for _lock and _unlock.
Apart from line numbers, gcc -E outputs the same code.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Waiman Long <longman@redhat.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20231012143158.GA16133@redhat.com
|
|
kernel-doc emits a warning:
include/uapi/drm/nouveau_drm.h:49: warning: Cannot understand * @NOUVEAU_GETPARAM_EXEC_PUSH_MAX
on line 49 - I thought it was a doc line
We don't have a way to document a macro value via kernel-doc, so
change the "/**" kernel-doc marker to a C comment and format the comment
more like a kernel-doc comment for consistency.
Fixes: d59e75eef52d ("drm/nouveau: exec: report max pushs through getparam")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Danilo Krummrich <dakr@redhat.com>
Cc: Karol Herbst <kherbst@redhat.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: Bragatheswaran Manickavel <bragathemanick0908@gmail.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Danilo Krummrich <dakr@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231008140231.17921-1-rdunlap@infradead.org
|
|
Add recently added PCI IDs for DG2
BSpec: 44477
Signed-off-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231011080039.2781048-1-shekhar.chauhan@intel.com
|
|
Namhyung reported that bd2756811766 ("perf: Rewrite core context handling")
regresses context switch overhead when perf-cgroup is in use together
with 'slow' PMUs like uncore.
Specifically, perf_cgroup_switch()'s perf_ctx_disable() /
ctx_sched_out() etc.. all iterate the full list of active PMUs for
that CPU, even if they don't have cgroup events.
Previously there was cgrp_cpuctx_list which linked the relevant PMUs
together, but that got lost in the rework. Instead of re-instruducing
a similar list, let the perf_event_pmu_context iteration skip those
that do not have cgroup events. This avoids growing multiple versions
of the perf_event_pmu_context iteration.
Measured performance (on a slightly different patch):
Before)
$ taskset -c 0 ./perf bench sched pipe -l 10000 -G AAA,BBB
# Running 'sched/pipe' benchmark:
# Executed 10000 pipe operations between two processes
Total time: 0.901 [sec]
90.128700 usecs/op
11095 ops/sec
After)
$ taskset -c 0 ./perf bench sched pipe -l 10000 -G AAA,BBB
# Running 'sched/pipe' benchmark:
# Executed 10000 pipe operations between two processes
Total time: 0.065 [sec]
6.560100 usecs/op
152436 ops/sec
Fixes: bd2756811766 ("perf: Rewrite core context handling")
Reported-by: Namhyung Kim <namhyung@kernel.org>
Debugged-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20231009210425.GC6307@noisy.programming.kicks-ass.net
|
|
Since commit f0d9a5f17575 ("cgroup: make css_set_rwsem a spinlock
and rename it to css_set_lock"), css_set_rwsem has been replaced by
css_set_lock. That commit, however, missed the css_set_rwsem reference
in include/linux/cgroup-defs.h. Fix that by changing it to css_set_lock
as well.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Contrary to common belief, HCR_EL2.TGE has a direct and immediate
effect on the way the EL0 physical counter is offset. Flipping
TGE from 1 to 0 while at EL2 immediately changes the way the counter
compared to the CVAL limit.
This means that we cannot directly save/restore the guest's view of
CVAL, but that we instead must treat it as if CNTPOFF didn't exist.
Only in the world switch, once we figure out that we do have CNTPOFF,
can we must the offset back and forth depending on the polarity of
TGE.
Fixes: 2b4825a86940 ("KVM: arm64: timers: Use CNTPOFF_EL2 to offset the physical timer")
Reported-by: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Tested-by: Ganapatrao Kulkarni <gankulkarni@os.amperecomputing.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
Factor out vfs_parse_monolithic_sep() from generic_parse_monolithic(),
so filesystems could use it with a custom option separator callback.
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
Simple quotas count extents only from the moment the feature is enabled.
Therefore, if we do something like:
1. create subvol S
2. write F in S
3. enable quotas
4. remove F
5. write G in S
then after 3. and 4. we would expect the simple quota usage of S to be 0
(putting aside some metadata extents that might be written) and after
5., it should be the size of G plus metadata. Therefore, we need to be
able to determine whether a particular quota delta we are processing
predates simple quota enablement.
To do this, store the transaction id when quotas were enabled. In
fs_info for immediate use and in the quota status item to make it
recoverable on mount. When we see a delta, check if the generation of
the extent item is less than that of quota enablement. If so, we should
ignore the delta from this extent.
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
In order to implement simple quota groups, we need to be able to
associate a data extent with the subvolume that created it. Once you
account for reflink, this information cannot be recovered without
explicitly storing it. Options for storing it are:
- a new key/item
- a new extent inline ref item
The former is backwards compatible, but wastes space, the latter is
incompat, but is efficient in space and reuses the existing inline ref
machinery, while only abusing it a tiny amount -- specifically, the new
item is not a ref, per-se.
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Add a new quota mode called "simple quotas". It can be enabled by the
existing quota enable ioctl via a new command, and sets an incompat
bit, as the implementation of simple quotas will make backwards
incompatible changes to the disk format of the extent tree.
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
There are two callbacks defined in btrfs_work but only two actually make
use of them, otherwise there are NULLs. We can get rid of the freeing
callback making it a special case of the normal work. This reduces the
size of btrfs_work by 8 bytes, final layout:
struct btrfs_work {
btrfs_func_t func; /* 0 8 */
btrfs_ordered_func_t ordered_func; /* 8 8 */
struct work_struct normal_work; /* 16 32 */
struct list_head ordered_list; /* 48 16 */
/* --- cacheline 1 boundary (64 bytes) --- */
struct btrfs_workqueue * wq; /* 64 8 */
long unsigned int flags; /* 72 8 */
/* size: 80, cachelines: 2, members: 6 */
/* last cacheline: 16 bytes */
};
This in turn reduces size of other structures (on a release config):
- async_chunk 160 -> 152
- async_submit_bio 152 -> 144
- btrfs_async_delayed_work 104 -> 96
- btrfs_caching_control 176 -> 168
- btrfs_delalloc_work 144 -> 136
- btrfs_fs_info 3608 -> 3600
- btrfs_ordered_extent 440 -> 424
- btrfs_writepage_fixup 104 -> 96
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Add trace events for raid-stripe-tree operations.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
If we find the raid-stripe-tree on mount, read it from disk. This is
a backward incompatible feature. The rescue=ignorebadroots mount option
will skip this tree.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Add definitions for the raid stripe tree. This tree will hold information
about the on-disk layout of the stripes in a RAID set.
Each stripe extent has a 1:1 relationship with an on-disk extent item and
is doing the logical to per-drive physical address translation for the
extent item in question.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Define EHT U-SIG bandwidth used by radiotap according to Table 36-28
"U-SIG field of an EHT MU PPDU" in 802.11be (D3.0).
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20231011115256.6121-2-pkshih@realtek.com
|
