| Age | Commit message (Collapse) | Author |
|---|
|
Added a new struct, io_tlb_mem, as the IO TLB memory pool descriptor and
moved relevant global variables into that struct.
This will be useful later to allow for restricted DMA pool.
Signed-off-by: Claire Chang <tientzu@chromium.org>
[hch: rebased]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
|
|
call_gro_receive() is used to limit GRO recursion, but it works only
with callback pointers.
There's a combined version of call_gro_receive() + INDIRECT_CALL_2()
in <net/inet_common.h>, but it doesn't check for IPv6 modularity.
Add a similar new helper to cover both of these. It can and will be
used to avoid retpoline overhead when IP header lies behind another
offloaded proto.
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If some source file includes <net/gro.h>, but doesn't include
<linux/indirect_call_wrapper.h>:
In file included from net/8021q/vlan_core.c:7:
./include/net/gro.h:6:1: warning: data definition has no type or storage class
6 | INDIRECT_CALLABLE_DECLARE(struct sk_buff *ipv6_gro_receive(struct list_head *,
| ^~~~~~~~~~~~~~~~~~~~~~~~~
./include/net/gro.h:6:1: error: type defaults to ‘int’ in declaration of ‘INDIRECT_CALLABLE_DECLARE’ [-Werror=implicit-int]
[...]
Include <linux/indirect_call_wrapper.h> directly. It's small and
won't pull lots of dependencies.
Also add some incomplete struct declarations to be fully stacked.
Fixes: 04f00ab2275f ("net/core: move gro function declarations to separate header ")
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
All sbitmap code uses implied preemption protection to update
sb->alloc_hint except sbitmap_put(). Using implied preemption protection is
safe since the value of sb->alloc_hint only affects performance of sbitmap
allocations but not their correctness. Change this_cpu_ptr() in
sbitmap_put() into raw_cpu_ptr() to suppress the following kernel warning
that appears with preemption debugging enabled (CONFIG_DEBUG_PREEMPT):
BUG: using smp_processor_id() in preemptible [00000000] code: scsi_eh_0/152
caller is debug_smp_processor_id+0x17/0x20
CPU: 1 PID: 152 Comm: scsi_eh_0 Tainted: G W 5.12.0-rc1-dbg+ #6
Call Trace:
show_stack+0x52/0x58
dump_stack+0xaf/0xf3
check_preemption_disabled+0xce/0xd0
debug_smp_processor_id+0x17/0x20
scsi_device_unbusy+0x13a/0x1c0 [scsi_mod]
scsi_finish_command+0x4d/0x290 [scsi_mod]
scsi_eh_flush_done_q+0x1e7/0x280 [scsi_mod]
ata_scsi_port_error_handler+0x592/0x750 [libata]
ata_scsi_error+0x1a0/0x1f0 [libata]
scsi_error_handler+0x19e/0x330 [scsi_mod]
kthread+0x222/0x250
ret_from_fork+0x1f/0x30
Link: https://lore.kernel.org/r/20210317032648.9080-1-bvanassche@acm.org
Fixes: c548e62bcf6a ("scsi: sbitmap: Move allocation hint into sbitmap")
Cc: Hannes Reinecke <hare@suse.de>
Cc: Omar Sandoval <osandov@fb.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Several patches to testore use of memory barriers instead of RCU to
ensure consistent access to ruleset, from Mark Tomlinson.
2) Fix dump of expectation via ctnetlink, from Florian Westphal.
3) GRE helper works for IPv6, from Ludovic Senecaux.
4) Set error on unsupported flowtable flags.
5) Use delayed instead of deferrable workqueue in the flowtable,
from Yinjun Zhang.
6) Fix spurious EEXIST in case of add-after-delete flowtable in
the same batch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The ocelot switches are a bit odd in that they do not have an STP state
to put the ports into. Instead, the forwarding configuration is delayed
from the typical port_bridge_join into stp_state_set, when the port enters
the BR_STATE_FORWARDING state.
I can only guess that the implementation of this quirk is the reason that
led to the simplification of the driver such that only one bridge could
be offloaded at a time.
We can simplify the data structures somewhat, and introduce a per-port
bridge device pointer and STP state, similar to how the LAG offload
works now (there we have a per-port bonding device pointer and TX
enabled state). This allows offloading multiple bridges with relative
ease, while still keeping in place the quirk to delay the programming of
the PGIDs.
We actually need this change now because we need to remove the bogus
restriction from ocelot_bridge_stp_state_set that ocelot->bridge_mask
needs to contain BIT(port), otherwise that function is a no-op.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Intel mGbE variant implemented in EHL and TGL can be set to select
different clock frequency based on GPO bits in MAC_GPIO_STATUS register.
We introduce a new "void (*ptp_clk_freq_config)(void *priv)" in platform
data so that if a platform is required to configure the frequency of clock
source, in this case Intel mGBE does, the platform-specific configuration
of the PTP clock setting is done when stmmac_ptp_register() is called.
Signed-off-by: Wong, Vee Khee <vee.khee.wong@intel.com>
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Co-developed-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull drm fixes from Dave Airlie:
"Regular fixes pull, pretty small set of fixes, a couple of i915 and
amdgpu, one ttm, one nouveau and one omap. Probably smaller than usual
for this time, so we'll see if something pops up next week or if this
will continue to stay small.
Summary:
ttm:
- Make ttm_bo_unpin() not wraparound on too many unpins
omap:
- Fix coccicheck warning in omap
amdgpu:
- DCN 3.0 gamma fixes
- DCN 2.1 corrupt screen fix
i915:
- Workaround async flip + VT-d frame corruption on HSW/BDW
- Fix NMI watchdog crash due to uninitialized OA buffer use on gen12+
nouveau:
- workaround oops with bo syncing"
* tag 'drm-fixes-2021-03-19' of git://anongit.freedesktop.org/drm/drm:
nouveau: Skip unvailable ttm page entries
drm/amd/display: Remove MPC gamut remap logic for DCN30
drm/amd/display: Correct algorithm for reversed gamma
drm/omap: dsi: fix unsigned expression compared with zero
i915/perf: Start hrtimer only if sampling the OA buffer
drm/i915: Workaround async flip + VT-d corruption on HSW/BDW
drm/amd/display: Copy over soc values before bounding box creation
drm/ttm: make ttm_bo_unpin more defensive
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
drm-misc-fixes for v5.12-rc4:
- Make ttm_bo_unpin() not wraparound on too many unpins.
- Fix coccicheck warning in omap.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a0e13bbb-6ba6-ff24-4db8-0e02e605de18@linux.intel.com
|
|
In order for a driver to be able to query a bridge for information
about itself, e.g. reading out port flags, it has to use a netdev that
is known to the bridge. In the simple case, that is just the netdev
representing the port, e.g. swp0 or swp1 in this example:
br0
/ \
swp0 swp1
But in the case of an offloaded lag, this will be the bond or team
interface, e.g. bond0 in this example:
br0
/
bond0
/ \
swp0 swp1
Add a helper that hides some of this complexity from the
drivers. Then, redefine dsa_port_offloads_bridge_port using the helper
to avoid double accounting of the set of possible offloaded uppers.
Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Move the xps maps (xps_cpus_map and xps_rxqs_map) to an array in
net_device. That will simplify a lot the code removing the need for lots
of if/else conditionals as the correct map will be available using its
offset in the array.
This should not modify the xps maps behaviour in any way.
Suggested-by: Alexander Duyck <alexander.duyck@gmail.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Embed nr_ids (the number of cpu for the xps cpus map, and the number of
rxqs for the xps cpus map) in dev_maps. That will help not accessing out
of bound memory if those values change after dev_maps was allocated.
Suggested-by: Alexander Duyck <alexander.duyck@gmail.com>
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The xps cpus/rxqs map is accessed using dev->num_tc, which is used when
allocating the map. But later updates of dev->num_tc can lead to having
a mismatch between the maps and how they're accessed. In such cases the
map values do not make any sense and out of bound accesses can occur
(that can be easily seen using KASAN).
This patch aims at fixing this by embedding num_tc into the maps, using
the value at the time the map is created. This brings two improvements:
- The maps can be accessed using the embedded num_tc, so we know for
sure we won't have out of bound accesses.
- Checks can be made before accessing the maps so we know the values
retrieved will make sense.
We also update __netif_set_xps_queue to conditionally copy old maps from
dev_maps in the new one only if the number of traffic classes from both
maps match.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull VFIO fixes from Alex Williamson:
- Fix 32-bit issue with new unmap-all flag (Steve Sistare)
- Various Kconfig changes for better coverage (Jason Gunthorpe)
- Fix to batch pinning support (Daniel Jordan)
* tag 'vfio-v5.12-rc4' of git://github.com/awilliam/linux-vfio:
vfio/type1: fix vaddr_get_pfns() return in vfio_pin_page_external()
vfio: Depend on MMU
ARM: amba: Allow some ARM_AMBA users to compile with COMPILE_TEST
vfio-platform: Add COMPILE_TEST to VFIO_PLATFORM
vfio: IOMMU_API should be selected
vfio/type1: fix unmap all on ILP32
|
|
Pull virtio fixes from Michael Tsirkin:
"Some fixes and cleanups all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost-vdpa: set v->config_ctx to NULL if eventfd_ctx_fdget() fails
vhost-vdpa: fix use-after-free of v->config_ctx
vhost: Fix vhost_vq_reset()
vhost_vdpa: fix the missing irq_bypass_unregister_producer() invocation
vdpa_sim: Skip typecasting from void*
virtio: remove export for virtio_config_{enable, disable}
virtio-mmio: Use to_virtio_mmio_device() to simply code
vdpa: set the virtqueue num during register
|
|
Dmitry Osipenko <digetx@gmail.com>:
Hi,
This series adds missing hardware reset controls to I2S and AC97 drivers,
corrects runtime PM usage and drivers probe/remove order. Currently drivers
happen to work properly because reset is implicitly deasserted by tegra-clk
driver, but clk driver shouldn't touch the resets and we need to fix it
because this breaks other Tegra drivers. Previously we fixed the resets of
the AHUB and HDMI codec drivers, but turned out that we missed the I2C and
AC97 drivers.
Thanks to Paul Fertser for testing the pending clk patches and finding
that audio got broken on Tegra20 AC100 netbook because of the missing I2S
reset.
Changelog:
v5: - After taking another look at the drivers I noticed couple more
things that could be improved. These new patches correct runtime PM
and probe/remove order of the drivers:
ASoC: tegra20: spdif: Correct driver removal order
ASoC: tegra20: spdif: Remove handing of disabled runtime PM
ASoC: tegra20: i2s: Add system level suspend-resume callbacks
ASoC: tegra20: i2s: Correct driver removal order
ASoC: tegra20: i2s: Use devm_clk_get()
ASoC: tegra20: i2s: Remove handing of disabled runtime PM
ASoC: tegra30: i2s: Correct driver removal order
ASoC: tegra30: i2s: Use devm_clk_get()
ASoC: tegra30: i2s: Remove handing of disabled runtime PM
ASoC: tegra30: ahub: Reset global variable
ASoC: tegra30: ahub: Correct suspend-resume callbacks
ASoC: tegra30: ahub: Remove handing of disabled runtime PM
v4: - Added missing prototype for reset_control_bulk_put().
v3: - Fixed reset stubs for !CONFIG_RESET_CONTROLLER.
v2: - After some more testing I found that I2S control logic doesn't require
I2S clock to be enabled for resetting. Hence it's fine to have I2S to
be reset by parent AHUB driver, so I dropped "tegra30: i2s: Add reset
control" patch.
- While I was double-checking resets on Tegra30, I found that that
Tegra30 I2S driver has a broken runtime PM which doesn't restore
hardware state on resume and it's lost after AHUB RPM-resume.
Thus, added this new patch "tegra30: i2s: Restore hardware state
on runtime PM resume".
- Added new patches which switch AHUB driver to use reset-bulk API.
I took the RFC patch from Philipp Zabel, fixed it and added
devm_reset_control_bulk_optional_get_exclusive_released() that
will be useful for further Tegra GPU patches. This is a minor
improvement which makes code cleaner.
Dmitry Osipenko (16):
ASoC: tegra20: ac97: Add reset control
ASoC: tegra20: i2s: Add reset control
ASoC: tegra30: i2s: Restore hardware state on runtime PM resume
ASoC: tegra30: ahub: Switch to use reset-bulk API
ASoC: tegra20: spdif: Correct driver removal order
ASoC: tegra20: spdif: Remove handing of disabled runtime PM
ASoC: tegra20: i2s: Add system level suspend-resume callbacks
ASoC: tegra20: i2s: Correct driver removal order
ASoC: tegra20: i2s: Use devm_clk_get()
ASoC: tegra20: i2s: Remove handing of disabled runtime PM
ASoC: tegra30: i2s: Correct driver removal order
ASoC: tegra30: i2s: Use devm_clk_get()
ASoC: tegra30: i2s: Remove handing of disabled runtime PM
ASoC: tegra30: ahub: Reset global variable
ASoC: tegra30: ahub: Correct suspend-resume callbacks
ASoC: tegra30: ahub: Remove handing of disabled runtime PM
Philipp Zabel (1):
reset: Add reset_control_bulk API
drivers/reset/core.c | 215 ++++++++++++++++++++++
include/linux/reset.h | 315 ++++++++++++++++++++++++++++++++
sound/soc/tegra/tegra20_ac97.c | 21 +++
sound/soc/tegra/tegra20_ac97.h | 1 +
sound/soc/tegra/tegra20_i2s.c | 60 +++---
sound/soc/tegra/tegra20_i2s.h | 1 +
sound/soc/tegra/tegra20_spdif.c | 16 +-
sound/soc/tegra/tegra30_ahub.c | 168 ++++++-----------
sound/soc/tegra/tegra30_ahub.h | 5 +-
sound/soc/tegra/tegra30_i2s.c | 65 ++-----
10 files changed, 667 insertions(+), 200 deletions(-)
--
2.30.2
base-commit: a38fd8748464831584a19438cbb3082b5a2dab15
|
|
In the case that the seq_buf buffer needs to be printed directly, add a way
to make sure that the buffer is safe to read by forcing a nul terminating
character at the end of the string, or the last byte of the buffer if the
string has overflowed.
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
all events
Currently, ring_buffer_event_time_stamp() only returns an accurate time
stamp of the event if it has an absolute extended time stamp attached to
it. To make it more robust, use the event_stamp() in case the event does
not have an absolute value attached to it.
This will allow ring_buffer_event_time_stamp() to be used in more cases
than just histograms, and it will also allow histograms to not require
including absolute values all the time.
Link: https://lkml.kernel.org/r/20210316164113.704830885@goodmis.org
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
The ring_buffer_event_time_stamp() is going to be updated to extract the
time stamp for the event without needing it to be set to have absolute
values for all events. But to do so, it needs the buffer that the event is
on as the buffer saves information for the event before it is committed to
the buffer.
If the trace buffer is disabled, a temporary buffer is used, and there's
no access to this buffer from the current histogram triggers, even though
it is passed to the trace event code.
Pass the buffer that the event is on all the way down to the histogram
triggers.
Link: https://lkml.kernel.org/r/20210316164113.542448131@goodmis.org
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
The trace event "workqueue_queue_work" references an unsafe string in
dereferencing the name of the workqueue. As the name is allocated, it
could later be freed, and the pointer to that string could stay on the
tracing buffer. If the trace buffer is read after the string is freed, it
will reference an unsafe pointer.
I added a new verifier to make sure that all strings referenced in the
output of the trace buffer is safe to read and this triggered on the
workqueue_queue_work trace event:
workqueue_queue_work: work struct=00000000b2b235c7 function=gc_worker workqueue=(0xffff888100051160:events_power_efficient)[UNSAFE-MEMORY] req_cpu=256 cpu=1
workqueue_queue_work: work struct=00000000c344caec function=flush_to_ldisc workqueue=(0xffff888100054d60:events_unbound)[UNSAFE-MEMORY] req_cpu=256 cpu=4294967295
workqueue_queue_work: work struct=00000000b2b235c7 function=gc_worker workqueue=(0xffff888100051160:events_power_efficient)[UNSAFE-MEMORY] req_cpu=256 cpu=1
workqueue_queue_work: work struct=000000000b238b3f function=vmstat_update workqueue=(0xffff8881000c3760:mm_percpu_wq)[UNSAFE-MEMORY] req_cpu=1 cpu=1
Also, if this event is read via a user space application like perf or
trace-cmd, the name would only be an address and useless information:
workqueue_queue_work: work struct=0xffff953f80b4b918 function=disk_events_workfn workqueue=ffff953f8005d378 req_cpu=8192 cpu=5
Cc: Zqiang <qiang.zhang@windriver.com>
Cc: Tejun Heo <tj@kernel.org>
Fixes: 7bf9c4a88e3e3 ("workqueue: tracing the name of the workqueue instead of it's address")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Clean up COMMAND_RECONFIG_FLAG_PARTIAL flag by resetting it to 0, which
aligns with the firmware settings.
Fixes: 36847f9e3e56 ("firmware: stratix10-svc: correct reconfig flag and timeout values")
Signed-off-by: Richard Gong <richard.gong@intel.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Moritz Fischer <mdf@kernel.org>
|
|
Report the number of warnings that a user will get for exceeding the
soft limit of a realtime volume. This plugs a gap needed before we
can land a realtime quota implementation for XFS in the next cycle.
Link: https://lore.kernel.org/r/20210318041736.GB22094@magnolia
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Link: https://lore.kernel.org/r/8c1d14f3748105f4caeda01716d47af2fa41d11c.1615809009.git.metze@samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently we have had an artificial limitation of a single DMA tunnel
per XDomain connection. However, hardware wise there is no such limit
and software based connection manager can take advantage of all the DMA
rings available on the host to establish tunnels.
For this reason make the tb_xdomain_[enable|disable]_paths() to take the
DMA ring and HopID as parameter instead of storing them in the struct
tb_xdomain. We also add API functions to allocate input and output
HopIDs of the XDomain connection that the service drivers can use
instead of hard-coding.
Also convert the two existing service drivers over to this API.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
USB4 inter-domain spec mandates that the compatible hosts expose a new
property "maxhopid" that tells the connection manager on the other side
what is the maximum supported input HopID over the connection. Since
this is depend on the lane adapter the cable is connected it needs to be
filled in dynamically.
For this reason we take a copy of the global properties and fill then
for each XDomain connection upon first connect, and then keep updating
it if the generation changes as services are being added/removed. We
also take advantage of this copy to fill in the hostname.
We also expose this maxhopid as an attribute under each XDomain device.
While there drop kernel-doc entry for property_lock which seems to be
left there when the structure was originally introduced.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
This function takes a deep copy of the properties. We need this in order
to support more dynamic properties per XDomain connection as required by
the USB4 inter-domain service spec.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
This step is actually not needed. The service drivers themselves will
handle this once they have negotiated the service up and running again
with the remote side. Also dropping this makes it easier to add support
for multiple DMA tunnels over a single XDomain connection.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Qualcomm's MFD chips have a top level interrupt status register and
sub-irqs (peripherals). When a bit in the main status register goes
high, it means that the peripheral corresponding to that bit has an
unserviced interrupt. If the bit is not set, this means that the
corresponding peripheral does not.
Commit a2d21848d9211d ("regmap: regmap-irq: Add main status register
support") introduced the sub-irq logic that is currently applied only
when reading status registers, but not for any other functions like acking
or masking. Extend the use of sub-irq to all other functions, with two
caveats regarding the specification of offsets:
- Each member of the sub_reg_offsets array should be of length 1
- The specified offsets should be the unequal strides for each sub-irq
device.
In QCOM's case, all the *_base registers are to be configured to the
base addresses of the first sub-irq group, with offsets of each
subsequent group calculated as a difference from these addresses.
Continuing from the example mentioned in the cover letter:
/*
* Address of MISC_INT_MASK = 0x1011
* Address of TEMP_ALARM_INT_MASK = 0x2011
* Address of GPIO01_INT_MASK = 0x3011
*
* Calculate offsets as:
* offset_0 = 0x1011 - 0x1011 = 0 (to access MISC's
* registers)
* offset_1 = 0x2011 - 0x1011 = 0x1000
* offset_2 = 0x3011 - 0x1011 = 0x2000
*/
static unsigned int sub_unit0_offsets[] = {0};
static unsigned int sub_unit1_offsets[] = {0x1000};
static unsigned int sub_unit2_offsets[] = {0x2000};
static struct regmap_irq_sub_irq_map chip_sub_irq_offsets[] = {
REGMAP_IRQ_MAIN_REG_OFFSET(sub_unit0_offsets),
REGMAP_IRQ_MAIN_REG_OFFSET(sub_unit0_offsets),
REGMAP_IRQ_MAIN_REG_OFFSET(sub_unit0_offsets),
};
static struct regmap_irq_chip chip_irq_chip = {
--------8<--------
.not_fixed_stride = true,
.mask_base = MISC_INT_MASK,
.type_base = MISC_INT_TYPE,
.ack_base = MISC_INT_ACK,
.sub_reg_offsets = chip_sub_irq_offsets,
--------8<--------
};
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
Link: https://lore.kernel.org/r/526562423eaa58b4075362083f561841f1d6956c.1615423027.git.gurus@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Follow the clock and regulator subsystems' lead and add a bulk API
for reset controls.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Link: https://lore.kernel.org/r/20210314154459.15375-5-digetx@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
libdrm has supported the newer execbuffer2 ioctl and using it by default
when it exists since libdrm commit b50964027bef which landed Mar 2, 2010.
The i915 and i965 drivers in Mesa at the time both used libdrm and so
did the Intel X11 back-end. The SNA back-end for X11 has always used
execbuffer2.
v2 (Jason Ekstrand):
- Add a comment saying what Linux version it's being removed in.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Keith Packard <keithp@keithp.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210317234014.2271006-2-jason@jlekstrand.net
|
|
If it is possible to detach the remote processor, keep an untouched
copy of the resource table. That way we can start from the same
resource table without having to worry about original values or what
elements the startup code has changed when re-attaching to the remote
processor.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Link: https://lore.kernel.org/r/20210312162453.1234145-12-mathieu.poirier@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Introduce function rproc_detach() to enable the remoteproc
core to release the resources associated with a remote processor
without stopping its operation.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Link: https://lore.kernel.org/r/20210312162453.1234145-11-mathieu.poirier@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Add an new detach() operation in order to support scenarios where
the remoteproc core is going away but the remote processor is
kept operating. This could be the case when the system is
rebooted or when the platform driver is removed.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Link: https://lore.kernel.org/r/20210312162453.1234145-9-mathieu.poirier@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Add a new get_loaded_rsc_table() operation in order to support
scenarios where the remoteproc core has booted a remote processor
and detaches from it. When re-attaching to the remote processor,
the core needs to know where the resource table has been placed
in memory.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Link: https://lore.kernel.org/r/20210312162453.1234145-6-mathieu.poirier@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
There is a need to know when a remote processor has been attached
to rather than booted by the remoteproc core. In order to avoid
manipulating two variables, i.e rproc::autonomous and
rproc::state, get rid of the former and simply use the newly
introduced RPROC_ATTACHED state.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Link: https://lore.kernel.org/r/20210312162453.1234145-5-mathieu.poirier@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Add a new RPROC_ATTACHED state to take into account scenarios
where the remoteproc core needs to attach to a remote processor
that is booted by another entity.
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Link: https://lore.kernel.org/r/20210312162453.1234145-4-mathieu.poirier@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
Write protect bit, when set, inhibits supervisor writes to the read-only
pages. In guest supervisor shared virtual addressing (SVA), write-protect
should be honored upon guest bind supervisor PASID request.
This patch extends the VT-d portion of the IOMMU UAPI to include WP bit.
WPE bit of the supervisor PASID entry will be set to match CPU CR0.WP bit.
Signed-off-by: Sanjay Kumar <sanjay.k.kumar@intel.com>
Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/1614680040-1989-3-git-send-email-jacob.jun.pan@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
When the invalidation queue errors are encountered, dump the information
logged by the VT-d hardware together with the pending queue invalidation
descriptors.
Signed-off-by: Ashok Raj <ashok.raj@intel.com>
Tested-by: Guo Kaijie <Kaijie.Guo@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20210318005340.187311-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
In converting intel-iommu over to the common IOMMU DMA ops, it quietly
lost the functionality of its "forcedac" option. Since this is a handy
thing both for testing and for performance optimisation on certain
platforms, reimplement it under the common IOMMU parameter namespace.
For the sake of fixing the inadvertent breakage of the Intel-specific
parameter, remove the dmar_forcedac remnants and hook it up as an alias
while documenting the transition to the new common parameter.
Fixes: c588072bba6b ("iommu/vt-d: Convert intel iommu driver to the iommu ops")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/7eece8e0ea7bfbe2cd0e30789e0d46df573af9b0.1614961776.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
According with USB Device Class Definition for Video Device the
Processing Unit Descriptor bLength should be 12 (10 + bmControlSize),
but it has 11.
Invalid length caused that Processing Unit Descriptor Test Video form
CV tool failed. To fix this issue patch adds bmVideoStandards into
uvc_processing_unit_descriptor structure.
The bmVideoStandards field was added in UVC 1.1 and it wasn't part of
UVC 1.0a.
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Pawel Laszczak <pawell@cadence.com>
Reviewed-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20210315071748.29706-1-pawell@gli-login.cadence.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The selftest failed to compile with clang-built bpf-next.
Adding LLVM=1 to your vmlinux and selftest build will use clang.
The error message is:
progs/test_sk_storage_tracing.c:38:18: error: use of undeclared identifier 'BPF_TCP_CLOSE'
if (newstate == BPF_TCP_CLOSE)
^
1 error generated.
make: *** [Makefile:423: /bpf-next/tools/testing/selftests/bpf/test_sk_storage_tracing.o] Error 1
The reason for the failure is that BPF_TCP_CLOSE, a value of
an anonymous enum defined in uapi bpf.h, is not defined in
vmlinux.h. gcc does not have this problem. Since vmlinux.h
is derived from BTF which is derived from vmlinux DWARF,
that means gcc-produced vmlinux DWARF has BPF_TCP_CLOSE
while llvm-produced vmlinux DWARF does not have.
BPF_TCP_CLOSE is referenced in net/ipv4/tcp.c as
BUILD_BUG_ON((int)BPF_TCP_CLOSE != (int)TCP_CLOSE);
The following test mimics the above BUILD_BUG_ON, preprocessed
with clang compiler, and shows gcc DWARF contains BPF_TCP_CLOSE while
llvm DWARF does not.
$ cat t.c
enum {
BPF_TCP_ESTABLISHED = 1,
BPF_TCP_CLOSE = 7,
};
enum {
TCP_ESTABLISHED = 1,
TCP_CLOSE = 7,
};
int test() {
do {
extern void __compiletime_assert_767(void) ;
if ((int)BPF_TCP_CLOSE != (int)TCP_CLOSE) __compiletime_assert_767();
} while (0);
return 0;
}
$ clang t.c -O2 -c -g && llvm-dwarfdump t.o | grep BPF_TCP_CLOSE
$ gcc t.c -O2 -c -g && llvm-dwarfdump t.o | grep BPF_TCP_CLOSE
DW_AT_name ("BPF_TCP_CLOSE")
Further checking clang code find clang actually tried to
evaluate condition at compile time. If it is definitely
true/false, it will perform optimization and the whole if condition
will be removed before generating IR/debuginfo.
This patch explicited add an expression after the
above mentioned BUILD_BUG_ON in net/ipv4/tcp.c like
(void)BPF_TCP_ESTABLISHED
to enable generation of debuginfo for the anonymous
enum which also includes BPF_TCP_CLOSE.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210317174132.589276-1-yhs@fb.com
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2021-03-18
The following pull-request contains BPF updates for your *net* tree.
We've added 10 non-merge commits during the last 4 day(s) which contain
a total of 14 files changed, 336 insertions(+), 94 deletions(-).
The main changes are:
1) Fix fexit/fmod_ret trampoline for sleepable programs, and also fix a ftrace
splat in modify_ftrace_direct() on address change, from Alexei Starovoitov.
2) Fix two oob speculation possibilities that allows unprivileged to leak mem
via side-channel, from Piotr Krysiuk and Daniel Borkmann.
3) Fix libbpf's netlink handling wrt SOCK_CLOEXEC, from Kumar Kartikeya Dwivedi.
4) Fix libbpf's error handling on failure in getting section names, from Namhyung Kim.
5) Fix tunnel collect_md BPF selftest wrt Geneve option handling, from Hangbin Liu.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Do not update table flags from the preparation phase. Store the flags
update into the transaction, then update the flags from the commit
phase.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Simplify existing fast NAT routines by returning void. After the
skb_try_make_writable() call consolidation, these routines cannot ever
fail.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This allows to remove the default case which should not ever happen and
that was added to avoid gcc warnings on unhandled FLOW_OFFLOAD_DIR_MAX
enumeration case.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
commit e97c3e278e95 ("tproxy: split off ipv6 defragmentation to a separate
module") left behind this.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Honor flowtable flags from the control update path. Disallow disabling
to toggle hardware offload support though.
Fixes: 8bb69f3b2918 ("netfilter: nf_tables: add flowtable offload control plane")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The fexit/fmod_ret programs can be attached to kernel functions that can sleep.
The synchronize_rcu_tasks() will not wait for such tasks to complete.
In such case the trampoline image will be freed and when the task
wakes up the return IP will point to freed memory causing the crash.
Solve this by adding percpu_ref_get/put for the duration of trampoline
and separate trampoline vs its image life times.
The "half page" optimization has to be removed, since
first_half->second_half->first_half transition cannot be guaranteed to
complete in deterministic time. Every trampoline update becomes a new image.
The image with fmod_ret or fexit progs will be freed via percpu_ref_kill and
call_rcu_tasks. Together they will wait for the original function and
trampoline asm to complete. The trampoline is patched from nop to jmp to skip
fexit progs. They are freed independently from the trampoline. The image with
fentry progs only will be freed via call_rcu_tasks_trace+call_rcu_tasks which
will wait for both sleepable and non-sleepable progs to complete.
Fixes: fec56f5890d9 ("bpf: Introduce BPF trampoline")
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Paul E. McKenney <paulmck@kernel.org> # for RCU
Link: https://lore.kernel.org/bpf/20210316210007.38949-1-alexei.starovoitov@gmail.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
Highlights:
- Alderlake S enabling, via topic branch (Aditya, Anusha, Caz, José, Lucas, Matt, Tejas)
- Refactor display code to shrink intel_display.c etc. (Dave)
- Support more gen 9 and Tigerlake PCH combinations (Lyude, Tejas)
- Add eDP MSO support (Jani)
Display:
- Refactor to support multiple PSR instances (Gwan-gyeong)
- Link training debug logging updates (Sean)
- Updates to eDP fixed mode handling (Jani)
- Disable PSR2 on JSL/EHL (Edmund)
- Support DDR5 and LPDDR5 for bandwidth computation (Clint, José)
- Update VBT DP max link rate table (Shawn)
- Disable the QSES check for HDCP2.2 over MST (Juston)
- PSR updates, refactoring, selective fetch (José, Gwan-gyeong)
- Display init sequence refactoring (Lucas)
- Limit LSPCON to gen 9 and 10 platforms (Ankit)
- Fix DDI lane polarity per VBT info (Uma)
- Fix HDMI vswing programming location in mode set (Ville)
- Various display improvements and refactorings and cleanups (Ville)
- Clean up DDI clock routing and readout (Ville)
- Workaround async flip + VT-d corruption on HSW/BDW (Ville)
- SAGV watermark fixes and cleanups (Ville)
- Silence pipe tracepoint WARNs (Ville)
Other:
- Remove require_force_probe protection from RKL, may need to be revisited (Tejas)
- Detect loss of MMIO access (Matt)
- GVT display improvements
- drm/i915: Disable runtime power management during shutdown (Imre)
- Perf/OA updates (Umesh)
- Remove references to struct drm_device.pdev, via topic branch (Thomas)
- Backmerge (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87v99rnk1g.fsf@intel.com
|
