| Age | Commit message (Collapse) | Author |
|---|
|
The last user of put_pages_list() converted away from it in 6.10 commit
06c375053cef ("iommu/vt-d: add wrapper functions for page allocations"):
delete put_pages_list().
Link: https://lkml.kernel.org/r/d9985d6a-293e-176b-e63d-82fdfd28c139@google.com
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Yang Shi <shy828301@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Implement a new lightweight guard page feature, that is regions of
userland virtual memory that, when accessed, cause a fatal signal to
arise.
Currently users must establish PROT_NONE ranges to achieve this.
However this is very costly memory-wise - we need a VMA for each and every
one of these regions AND they become unmergeable with surrounding VMAs.
In addition repeated mmap() calls require repeated kernel context switches
and contention of the mmap lock to install these ranges, potentially also
having to unmap memory if installed over existing ranges.
The lightweight guard approach eliminates the VMA cost altogether - rather
than establishing a PROT_NONE VMA, it operates at the level of page table
entries - establishing PTE markers such that accesses to them cause a
fault followed by a SIGSGEV signal being raised.
This is achieved through the PTE marker mechanism, which we have already
extended to provide PTE_MARKER_GUARD, which we installed via the generic
page walking logic which we have extended for this purpose.
These guard ranges are established with MADV_GUARD_INSTALL. If the range
in which they are installed contain any existing mappings, they will be
zapped, i.e. free the range and unmap memory (thus mimicking the
behaviour of MADV_DONTNEED in this respect).
Any existing guard entries will be left untouched. There is therefore no
nesting of guarded pages.
Guarded ranges are NOT cleared by MADV_DONTNEED nor MADV_FREE (in both
instances the memory range may be reused at which point a user would
expect guards to still be in place), but they are cleared via
MADV_GUARD_REMOVE, process teardown or unmapping of memory ranges.
The guard property can be removed from ranges via MADV_GUARD_REMOVE. The
ranges over which this is applied, should they contain non-guard entries,
will be untouched, with only guard entries being cleared.
We permit this operation on anonymous memory only, and only VMAs which are
non-special, non-huge and not mlock()'d (if we permitted this we'd have to
drop locked pages which would be rather counterintuitive).
Racing page faults can cause repeated attempts to install guard pages that
are interrupted, result in a zap, and this process can end up being
repeated. If this happens more than would be expected in normal
operation, we rescind locks and retry the whole thing, which avoids lock
contention in this scenario.
Link: https://lkml.kernel.org/r/6aafb5821bf209f277dfae0787abb2ef87a37542.1730123433.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Suggested-by: Jann Horn <jannh@google.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Suggested-by: Jann Horn <jannh@google.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Chris Zankel <chris@zankel.net>
Cc: Helge Deller <deller@gmx.de>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Jeff Xu <jeffxu@chromium.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add a new PTE marker that results in any access causing the accessing
process to segfault.
This is preferable to PTE_MARKER_POISONED, which results in the same
handling as hardware poisoned memory, and is thus undesirable for cases
where we simply wish to 'soft' poison a range.
This is in preparation for implementing the ability to specify guard pages
at the page table level, i.e. ranges that, when accessed, should cause
process termination.
Additionally, rename zap_drop_file_uffd_wp() to zap_drop_markers() - the
function checks the ZAP_FLAG_DROP_MARKER flag so naming it for this single
purpose was simply incorrect.
We then reuse the same logic to determine whether a zap should clear a
guard entry - this should only be performed on teardown and never on
MADV_DONTNEED or MADV_FREE.
We additionally add a WARN_ON_ONCE() in hugetlb logic should a guard
marker be encountered there, as we explicitly do not support this
operation and this should not occur.
Link: https://lkml.kernel.org/r/f47f3d5acca2dcf9bbf655b6d33f3dc713e4a4a0.1730123433.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Vlastimil Babka <vbabkba@suse.cz>
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Suggested-by: Jann Horn <jannh@google.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Chris Zankel <chris@zankel.net>
Cc: Helge Deller <deller@gmx.de>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Jeff Xu <jeffxu@chromium.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "implement lightweight guard pages", v4.
Userland library functions such as allocators and threading
implementations often require regions of memory to act as 'guard pages' -
mappings which, when accessed, result in a fatal signal being sent to the
accessing process.
The current means by which these are implemented is via a PROT_NONE mmap()
mapping, which provides the required semantics however incur an overhead
of a VMA for each such region.
With a great many processes and threads, this can rapidly add up and incur
a significant memory penalty. It also has the added problem of preventing
merges that might otherwise be permitted.
This series takes a different approach - an idea suggested by Vlastimil
Babka (and before him David Hildenbrand and Jann Horn - perhaps more - the
provenance becomes a little tricky to ascertain after this - please
forgive any omissions!) - rather than locating the guard pages at the VMA
layer, instead placing them in page tables mapping the required ranges.
Early testing of the prototype version of this code suggests a 5 times
speed up in memory mapping invocations (in conjunction with use of
process_madvise()) and a 13% reduction in VMAs on an entirely idle android
system and unoptimised code.
We expect with optimisation and a loaded system with a larger number of
guard pages this could significantly increase, but in any case these
numbers are encouraging.
This way, rather than having separate VMAs specifying which parts of a
range are guard pages, instead we have a VMA spanning the entire range of
memory a user is permitted to access and including ranges which are to be
'guarded'.
After mapping this, a user can specify which parts of the range should
result in a fatal signal when accessed.
By restricting the ability to specify guard pages to memory mapped by
existing VMAs, we can rely on the mappings being torn down when the
mappings are ultimately unmapped and everything works simply as if the
memory were not faulted in, from the point of view of the containing VMAs.
This mechanism in effect poisons memory ranges similar to hardware memory
poisoning, only it is an entirely software-controlled form of poisoning.
The mechanism is implemented via madvise() behaviour - MADV_GUARD_INSTALL
which installs page table-level guard page markers - and MADV_GUARD_REMOVE
- which clears them.
Guard markers can be installed across multiple VMAs and any existing
mappings will be cleared, that is zapped, before installing the guard page
markers in the page tables.
There is no concept of 'nested' guard markers, multiple attempts to
install guard markers in a range will, after the first attempt, have no
effect.
Importantly, removing guard markers over a range that contains both guard
markers and ordinary backed memory has no effect on anything but the guard
markers (including leaving huge pages un-split), so a user can safely
remove guard markers over a range of memory leaving the rest intact.
The actual mechanism by which the page table entries are specified makes
use of existing logic - PTE markers, which are used for the userfaultfd
UFFDIO_POISON mechanism.
Unfortunately PTE_MARKER_POISONED is not suited for the guard page
mechanism as it results in VM_FAULT_HWPOISON semantics in the fault
handler, so we add our own specific PTE_MARKER_GUARD and adapt existing
logic to handle it.
We also extend the generic page walk mechanism to allow for installation
of PTEs (carefully restricted to memory management logic only to prevent
unwanted abuse).
We ensure that zapping performed by MADV_DONTNEED and MADV_FREE do not
remove guard markers, nor does forking (except when VM_WIPEONFORK is
specified for a VMA which implies a total removal of memory
characteristics).
It's important to note that the guard page implementation is emphatically
NOT a security feature, so a user can remove the markers if they wish. We
simply implement it in such a way as to provide the least surprising
behaviour.
An extensive set of self-tests are provided which ensure behaviour is as
expected and additionally self-documents expected behaviour of guard
ranges.
This patch (of 5):
The existing generic pagewalk logic permits the walking of page tables,
invoking callbacks at individual page table levels via user-provided
mm_walk_ops callbacks.
This is useful for traversing existing page table entries, but precludes
the ability to establish new ones.
Existing mechanism for performing a walk which also installs page table
entries if necessary are heavily duplicated throughout the kernel, each
with semantic differences from one another and largely unavailable for use
elsewhere.
Rather than add yet another implementation, we extend the generic pagewalk
logic to enable the installation of page table entries by adding a new
install_pte() callback in mm_walk_ops. If this is specified, then upon
encountering a missing page table entry, we allocate and install a new one
and continue the traversal.
If a THP huge page is encountered at either the PMD or PUD level we split
it only if there are ops->pte_entry() (or ops->pmd_entry at PUD level),
otherwise if there is only an ops->install_pte(), we avoid the unnecessary
split.
We do not support hugetlb at this stage.
If this function returns an error, or an allocation fails during the
operation, we abort the operation altogether. It is up to the caller to
deal appropriately with partially populated page table ranges.
If install_pte() is defined, the semantics of pte_entry() change - this
callback is then only invoked if the entry already exists. This is a
useful property, as it allows a caller to handle existing PTEs while
installing new ones where necessary in the specified range.
If install_pte() is not defined, then there is no functional difference to
this patch, so all existing logic will work precisely as it did before.
As we only permit the installation of PTEs where a mapping does not
already exist there is no need for TLB management, however we do invoke
update_mmu_cache() for architectures which require manual maintenance of
mappings for other CPUs.
We explicitly do not allow the existing page walk API to expose this
feature as it is dangerous and intended for internal mm use only.
Therefore we provide a new walk_page_range_mm() function exposed only to
mm/internal.h.
We take the opportunity to additionally clean up the page walker logic to
be a little easier to follow.
Link: https://lkml.kernel.org/r/cover.1730123433.git.lorenzo.stoakes@oracle.com
Link: https://lkml.kernel.org/r/51b432ebef013e3fdf9f92101533435de1bffadf.1730123433.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Jann Horn <jannh@google.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Suggested-by: Jann Horn <jannh@google.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Chris Zankel <chris@zankel.net>
Cc: Helge Deller <deller@gmx.de>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Jeff Xu <jeffxu@chromium.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Richard Henderson <richard.henderson@linaro.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Sidhartha Kumar <sidhartha.kumar@oracle.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Vlastimil Babka <vbabkba@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This helps profile the sizes of folios being swapped in. Currently,
only mTHP swap-out is being counted.
The new interface can be found at:
/sys/kernel/mm/transparent_hugepage/hugepages-<size>/stats
swpin
For example,
cat /sys/kernel/mm/transparent_hugepage/hugepages-64kB/stats/swpin
12809
cat /sys/kernel/mm/transparent_hugepage/hugepages-32kB/stats/swpin
4763
[v-songbaohua@oppo.com: add a blank line in doc]
Link: https://lkml.kernel.org/r/20241030233423.80759-1-21cnbao@gmail.com
Link: https://lkml.kernel.org/r/20241026082423.26298-1-21cnbao@gmail.com
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Kairui Song <kasong@tencent.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Kanchana P Sridhar <kanchana.p.sridhar@intel.com>
Cc: Usama Arif <usamaarif642@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Added a new MTHP_STAT_ZSWPOUT entry to the sysfs transparent_hugepage
stats so that successful large folio zswap stores can be accounted under
the per-order sysfs "zswpout" stats:
/sys/kernel/mm/transparent_hugepage/hugepages-*kB/stats/zswpout
Other non-zswap swap device swap-out events will be counted under
the existing sysfs "swpout" stats:
/sys/kernel/mm/transparent_hugepage/hugepages-*kB/stats/swpout
Also, added documentation for the newly added sysfs per-order hugepage
"zswpout" stats. The documentation clarifies that only non-zswap swapouts
will be accounted in the existing "swpout" stats.
Link: https://lkml.kernel.org/r/20241001053222.6944-8-kanchana.p.sridhar@intel.com
Signed-off-by: Kanchana P Sridhar <kanchana.p.sridhar@intel.com>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Usama Arif <usamaarif642@gmail.com>
Cc: Wajdi Feghali <wajdi.k.feghali@intel.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: "Zou, Nanhai" <nanhai.zou@intel.com>
Cc: Barry Song <21cnbao@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
For zswap_store() to support large folios, we need to be able to do a
batch update of zswap_stored_pages upon successful store of all pages in
the folio. For this, we need to add folio_nr_pages(), which returns a
long, to zswap_stored_pages.
Link: https://lkml.kernel.org/r/20241001053222.6944-6-kanchana.p.sridhar@intel.com
Signed-off-by: Kanchana P Sridhar <kanchana.p.sridhar@intel.com>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Usama Arif <usamaarif642@gmail.com>
Cc: Wajdi Feghali <wajdi.k.feghali@intel.com>
Cc: "Zou, Nanhai" <nanhai.zou@intel.com>
Cc: Barry Song <21cnbao@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm: zswap swap-out of large folios", v10.
This patch series enables zswap_store() to accept and store large folios.
The most significant contribution in this series is from the earlier RFC
submitted by Ryan Roberts [1]. Ryan's original RFC has been migrated to
mm-unstable as of 9-30-2024 in patch 6 of this series, and adapted based
on code review comments received for the current patch-series.
[1]: [RFC PATCH v1] mm: zswap: Store large folios without splitting
https://lore.kernel.org/linux-mm/20231019110543.3284654-1-ryan.roberts@arm.com/T/#u
The first few patches do the prep work for supporting large folios in
zswap_store. Patch 6 provides the main functionality to swap-out large
folios in zswap. Patch 7 adds sysfs per-order hugepages "zswpout"
counters that get incremented upon successful zswap_store of large folios,
and also updates the documentation for this:
/sys/kernel/mm/transparent_hugepage/hugepages-*kB/stats/zswpout
This patch series is a prerequisite for zswap compress batching of large
folio swap-out and decompress batching of swap-ins based on
swapin_readahead(), using Intel IAA hardware acceleration, which we would
like to submit in subsequent patch-series, with performance improvement
data.
Thanks to Ying Huang for pre-posting review feedback and suggestions!
Thanks also to Nhat, Yosry, Johannes, Barry, Chengming, Usama, Ying and
Matthew for their helpful feedback, code/data reviews and suggestions!
Co-development signoff request:
===============================
I would like to thank Ryan Roberts for his original RFC [1] and request
his co-developer signoff on patch 6 in this series. Thanks Ryan!
System setup for testing:
=========================
Testing of this patch series was done with mm-unstable as of 9-27-2024,
commit de2fbaa6d9c3576ec7133ed02a370ec9376bf000 (without this patch-series)
and mm-unstable 9-30-2024 commit c121617e3606be6575cdacfdb63cc8d67b46a568
(with this patch-series). Data was gathered on an Intel Sapphire Rapids
server, dual-socket 56 cores per socket, 4 IAA devices per socket, 503 GiB
RAM and 525G SSD disk partition swap. Core frequency was fixed at 2500MHz.
The vm-scalability "usemem" test was run in a cgroup whose memory.high
was fixed at 150G. The is no swap limit set for the cgroup. 30 usemem
processes were run, each allocating and writing 10G of memory, and sleeping
for 10 sec before exiting:
usemem --init-time -w -O -s 10 -n 30 10g
Other kernel configuration parameters:
zswap compressors : zstd, deflate-iaa
zswap allocator : zsmalloc
vm.page-cluster : 2
In the experiments where "deflate-iaa" is used as the zswap compressor,
IAA "compression verification" is enabled by default
(cat /sys/bus/dsa/drivers/crypto/verify_compress). Hence each IAA
compression will be decompressed internally by the "iaa_crypto" driver, the
crc-s returned by the hardware will be compared and errors reported in case
of mismatches. Thus "deflate-iaa" helps ensure better data integrity as
compared to the software compressors, and the experimental data listed
below is with verify_compress set to "1".
Metrics reporting methodology:
==============================
Total and average throughput are derived from the individual 30 processes'
throughputs reported by usemem. elapsed/sys times are measured with perf.
All percentage changes are "new" vs. "old"; hence a positive value
denotes an increase in the metric, whether it is throughput or latency,
and a negative value denotes a reduction in the metric. Positive throughput
change percentages and negative latency change percentages denote improvements.
The vm stats and sysfs hugepages stats included with the performance data
provide details on the swapout activity to zswap/swap device.
Testing labels used in data summaries:
======================================
The data refers to these test configurations and the before/after
comparisons that they do:
before-case1:
-------------
mm-unstable 9-27-2024, CONFIG_THP_SWAP=N (compares zswap 4K vs. zswap 64K)
In this scenario, CONFIG_THP_SWAP=N results in 64K/2M folios to be split
into 4K folios that get processed by zswap.
before-case2:
-------------
mm-unstable 9-27-2024, CONFIG_THP_SWAP=Y (compares SSD swap large folios vs. zswap large folios)
In this scenario, CONFIG_THP_SWAP=Y results in zswap rejecting large
folios, which will then be stored by the SSD swap device.
after:
------
v10 of this patch-series, CONFIG_THP_SWAP=Y
The "after" is CONFIG_THP_SWAP=Y and v10 of this patch-series, that results
in 64K/2M folios to not be split, and to be processed by zswap_store.
Regression Testing:
===================
I ran vm-scalability usemem without large folios, i.e., only 4K folios with
mm-unstable and this patch-series. The main goal was to make sure that
there is no functional or performance regression wrt the earlier zswap
behavior for 4K folios, now that 4K folios will be processed by the new
zswap_store() code.
The data indicates there is no significant regression.
-------------------------------------------------------------------------------
4K folios:
==========
zswap compressor zstd zstd zstd zstd v10
before-case1 before-case2 after vs. vs.
case1 case2
-------------------------------------------------------------------------------
Total throughput (KB/s) 4,793,363 4,880,978 4,853,074 1% -1%
Average throughput (KB/s) 159,778 162,699 161,769 1% -1%
elapsed time (sec) 130.14 123.17 126.29 -3% 3%
sys time (sec) 3,135.53 2,985.64 3,083.18 -2% 3%
memcg_high 446,826 444,626 452,930
memcg_swap_fail 0 0 0
zswpout 48,932,107 48,931,971 48,931,820
zswpin 383 386 397
pswpout 0 0 0
pswpin 0 0 0
thp_swpout 0 0 0
thp_swpout_fallback 0 0 0
64kB-mthp_swpout_fallback 0 0 0
pgmajfault 3,063 3,077 3,479
swap_ra 93 94 96
swap_ra_hit 47 47 50
ZSWPOUT-64kB n/a n/a 0
SWPOUT-64kB 0 0 0
-------------------------------------------------------------------------------
Performance Testing:
====================
We list the data for 64K folios with before/after data per-compressor,
followed by the same for 2M pmd-mappable folios.
-------------------------------------------------------------------------------
64K folios: zstd:
=================
zswap compressor zstd zstd zstd zstd v10
before-case1 before-case2 after vs. vs.
case1 case2
-------------------------------------------------------------------------------
Total throughput (KB/s) 5,222,213 1,076,611 6,159,776 18% 472%
Average throughput (KB/s) 174,073 35,887 205,325 18% 472%
elapsed time (sec) 120.50 347.16 108.33 -10% -69%
sys time (sec) 2,930.33 248.16 2,549.65 -13% 927%
memcg_high 416,773 552,200 465,874
memcg_swap_fail 3,192,906 1,293 1,012
zswpout 48,931,583 20,903 48,931,218
zswpin 384 363 410
pswpout 0 40,778,448 0
pswpin 0 16 0
thp_swpout 0 0 0
thp_swpout_fallback 0 0 0
64kB-mthp_swpout_fallback 3,192,906 1,293 1,012
pgmajfault 3,452 3,072 3,061
swap_ra 90 87 107
swap_ra_hit 42 43 57
ZSWPOUT-64kB n/a n/a 3,057,173
SWPOUT-64kB 0 2,548,653 0
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
64K folios: deflate-iaa:
========================
zswap compressor deflate-iaa deflate-iaa deflate-iaa deflate-iaa v10
before-case1 before-case2 after vs. vs.
case1 case2
-------------------------------------------------------------------------------
Total throughput (KB/s) 5,652,608 1,089,180 7,189,778 27% 560%
Average throughput (KB/s) 188,420 36,306 239,659 27% 560%
elapsed time (sec) 102.90 343.35 87.05 -15% -75%
sys time (sec) 2,246.86 213.53 1,864.16 -17% 773%
memcg_high 576,104 502,907 642,083
memcg_swap_fail 4,016,117 1,407 1,478
zswpout 61,163,423 22,444 57,798,716
zswpin 401 368 454
pswpout 0 40,862,080 0
pswpin 0 20 0
thp_swpout 0 0 0
thp_swpout_fallback 0 0 0
64kB-mthp_swpout_fallback 4,016,117 1,407 1,478
pgmajfault 3,063 3,153 3,122
swap_ra 96 93 156
swap_ra_hit 46 45 83
ZSWPOUT-64kB n/a n/a 3,611,032
SWPOUT-64kB 0 2,553,880 0
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
2M folios: zstd:
================
zswap compressor zstd zstd zstd zstd v10
before-case1 before-case2 after vs. vs.
case1 case2
-------------------------------------------------------------------------------
Total throughput (KB/s) 5,895,500 1,109,694 6,484,224 10% 484%
Average throughput (KB/s) 196,516 36,989 216,140 10% 484%
elapsed time (sec) 108.77 334.28 106.33 -2% -68%
sys time (sec) 2,657.14 94.88 2,376.13 -11% 2404%
memcg_high 64,200 66,316 56,898
memcg_swap_fail 101,182 70 27
zswpout 48,931,499 36,507 48,890,640
zswpin 380 379 377
pswpout 0 40,166,400 0
pswpin 0 0 0
thp_swpout 0 78,450 0
thp_swpout_fallback 101,182 70 27
2MB-mthp_swpout_fallback 0 0 27
pgmajfault 3,067 3,417 3,311
swap_ra 91 90 854
swap_ra_hit 45 45 810
ZSWPOUT-2MB n/a n/a 95,459
SWPOUT-2MB 0 78,450 0
-------------------------------------------------------------------------------
-------------------------------------------------------------------------------
2M folios: deflate-iaa:
=======================
zswap compressor deflate-iaa deflate-iaa deflate-iaa deflate-iaa v10
before-case1 before-case2 after vs. vs.
case1 case2
-------------------------------------------------------------------------------
Total throughput (KB/s) 6,286,587 1,126,785 7,073,464 13% 528%
Average throughput (KB/s) 209,552 37,559 235,782 13% 528%
elapsed time (sec) 96.19 333.03 85.79 -11% -74%
sys time (sec) 2,141.44 99.96 1,826.67 -15% 1727%
memcg_high 99,253 64,666 79,718
memcg_swap_fail 129,074 53 165
zswpout 61,312,794 28,321 56,045,120
zswpin 383 406 403
pswpout 0 40,048,128 0
pswpin 0 0 0
thp_swpout 0 78,219 0
thp_swpout_fallback 129,074 53 165
2MB-mthp_swpout_fallback 0 0 165
pgmajfault 3,430 3,077 31,468
swap_ra 91 103 84,373
swap_ra_hit 47 46 84,317
ZSWPOUT-2MB n/a n/a 109,229
SWPOUT-2MB 0 78,219 0
-------------------------------------------------------------------------------
And finally, this is a comparison of deflate-iaa vs. zstd with v10 of this
patch-series:
---------------------------------------------
zswap_store large folios v10
Impr w/ deflate-iaa vs. zstd
64K folios 2M folios
---------------------------------------------
Throughput (KB/s) 17% 9%
elapsed time (sec) -20% -19%
sys time (sec) -27% -23%
---------------------------------------------
Conclusions based on the performance results:
=============================================
v10 wrt before-case1:
---------------------
We see significant improvements in throughput, elapsed and sys time for
zstd and deflate-iaa, when comparing before-case1 (THP_SWAP=N) vs. after
(THP_SWAP=Y) with zswap_store large folios.
v10 wrt before-case2:
---------------------
We see even more significant improvements in throughput and elapsed time
for zstd and deflate-iaa, when comparing before-case2 (large-folio-SSD)
vs. after (large-folio-zswap). The sys time increases with
large-folio-zswap as expected, due to the CPU compression time
vs. asynchronous disk write times, as pointed out by Ying and Yosry.
In before-case2, when zswap does not store large folios, only allocations
and cgroup charging due to 4K folio zswap stores count towards the cgroup
memory limit. However, in the after scenario, with the introduction of
zswap_store() of large folios, there is an added component of the zswap
compressed pool usage from large folio stores from potentially all 30
processes, that gets counted towards the memory limit. As a result, we see
higher swapout activity in the "after" data.
Summary:
========
The v10 data presented above shows that zswap_store of large folios
demonstrates good throughput/performance improvements compared to
conventional SSD swap of large folios with a sufficiently large 525G SSD
swap device. Hence, it seems reasonable for zswap_store to support large
folios, so that further performance improvements can be implemented.
In the experimental setup used in this patchset, we have enabled IAA
compress verification to ensure additional hardware data integrity CRC
checks not currently done by the software compressors. We see good
throughput/latency improvements with deflate-iaa vs. zstd with zswap_store
of large folios.
Some of the ideas for further reducing latency that have shown promise in
our experiments, are:
1) IAA compress/decompress batching.
2) Distributing compress jobs across all IAA devices on the socket.
The tests run for this patchset are using only 1 IAA device per core, that
avails of 2 compress engines on the device. In our experiments with IAA
batching, we distribute compress jobs from all cores to the 8 compress
engines available per socket. We further compress the pages in each folio
in parallel in the accelerator. As a result, we improve compress latency
and reclaim throughput.
In decompress batching, we use swapin_readahead to generate a prefetch
batch of 4K folios that we decompress in parallel in IAA.
------------------------------------------------------------------------------
IAA compress/decompress batching
Further improvements wrt v10 zswap_store Sequential
subpage store using "deflate-iaa":
"deflate-iaa" Batching "deflate-iaa-canned" [2] Batching
Additional Impr Additional Impr
64K folios 2M folios 64K folios 2M folios
------------------------------------------------------------------------------
Throughput (KB/s) 19% 43% 26% 55%
elapsed time (sec) -5% -14% -10% -21%
sys time (sec) 4% -7% -4% -18%
------------------------------------------------------------------------------
With zswap IAA compress/decompress batching, we are able to demonstrate
significant performance improvements and memory savings in server
scalability experiments in highly contended system scenarios under
significant memory pressure; as compared to software compressors. We hope
to submit this work in subsequent patch series. The current patch-series is
a prequisite for these future submissions.
[1] https://lore.kernel.org/linux-mm/20231019110543.3284654-1-ryan.roberts@arm.com/T/#u
[2] https://patchwork.kernel.org/project/linux-crypto/cover/cover.1710969449.git.andre.glover@linux.intel.com/
This patch (of 6):
This resolves an issue with obj_cgroup_get() not being defined if
CONFIG_MEMCG is not defined.
Before this patch, we would see build errors if obj_cgroup_get() is called
from code that is agnostic of CONFIG_MEMCG.
The zswap_store() changes for large folios in subsequent commits will
require the use of obj_cgroup_get() in zswap code that falls into this
category.
Link: https://lkml.kernel.org/r/20241001053222.6944-1-kanchana.p.sridhar@intel.com
Link: https://lkml.kernel.org/r/20241001053222.6944-2-kanchana.p.sridhar@intel.com
Signed-off-by: Kanchana P Sridhar <kanchana.p.sridhar@intel.com>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Reviewed-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Usama Arif <usamaarif642@gmail.com>
Cc: Wajdi Feghali <wajdi.k.feghali@intel.com>
Cc: "Zou, Nanhai" <nanhai.zou@intel.com>
Cc: Barry Song <21cnbao@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Pick up e7ac4daeed91 ("mm: count zeromap read and set for swapout and
swapin") in order to move
mm: define obj_cgroup_get() if CONFIG_MEMCG is not defined
mm: zswap: modify zswap_compress() to accept a page instead of a folio
mm: zswap: rename zswap_pool_get() to zswap_pool_tryget()
mm: zswap: modify zswap_stored_pages to be atomic_long_t
mm: zswap: support large folios in zswap_store()
mm: swap: count successful large folio zswap stores in hugepage zswpout stats
mm: zswap: zswap_store_page() will initialize entry after adding to xarray.
mm: add per-order mTHP swpin counters
from mm-unstable into mm-stable.
|
|
When the proportion of folios from the zeromap is small, missing their
accounting may not significantly impact profiling. However, it's easy to
construct a scenario where this becomes an issue—for example, allocating
1 GB of memory, writing zeros from userspace, followed by MADV_PAGEOUT,
and then swapping it back in. In this case, the swap-out and swap-in
counts seem to vanish into a black hole, potentially causing semantic
ambiguity.
On the other hand, Usama reported that zero-filled pages can exceed 10% in
workloads utilizing zswap, while Hailong noted that some app in Android
have more than 6% zero-filled pages. Before commit 0ca0c24e3211 ("mm:
store zero pages to be swapped out in a bitmap"), both zswap and zRAM
implemented similar optimizations, leading to these optimized-out pages
being counted in either zswap or zRAM counters (with pswpin/pswpout also
increasing for zRAM). With zeromap functioning prior to both zswap and
zRAM, userspace will no longer detect these swap-out and swap-in actions.
We have three ways to address this:
1. Introduce a dedicated counter specifically for the zeromap.
2. Use pswpin/pswpout accounting, treating the zero map as a standard
backend. This approach aligns with zRAM's current handling of
same-page fills at the device level. However, it would mean losing the
optimized-out page counters previously available in zRAM and would not
align with systems using zswap. Additionally, as noted by Nhat Pham,
pswpin/pswpout counters apply only to I/O done directly to the backend
device.
3. Count zeromap pages under zswap, aligning with system behavior when
zswap is enabled. However, this would not be consistent with zRAM, nor
would it align with systems lacking both zswap and zRAM.
Given the complications with options 2 and 3, this patch selects
option 1.
We can find these counters from /proc/vmstat (counters for the whole
system) and memcg's memory.stat (counters for the interested memcg).
For example:
$ grep -E 'swpin_zero|swpout_zero' /proc/vmstat
swpin_zero 1648
swpout_zero 33536
$ grep -E 'swpin_zero|swpout_zero' /sys/fs/cgroup/system.slice/memory.stat
swpin_zero 3905
swpout_zero 3985
This patch does not address any specific zeromap bug, but the missing
swpout and swpin counts for zero-filled pages can be highly confusing and
may mislead user-space agents that rely on changes in these counters as
indicators. Therefore, we add a Fixes tag to encourage the inclusion of
this counter in any kernel versions with zeromap.
Many thanks to Kanchana for the contribution of changing
count_objcg_event() to count_objcg_events() to support large folios[1],
which has now been incorporated into this patch.
[1] https://lkml.kernel.org/r/20241001053222.6944-5-kanchana.p.sridhar@intel.com
Link: https://lkml.kernel.org/r/20241107011246.59137-1-21cnbao@gmail.com
Fixes: 0ca0c24e3211 ("mm: store zero pages to be swapped out in a bitmap")
Co-developed-by: Kanchana P Sridhar <kanchana.p.sridhar@intel.com>
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Reviewed-by: Chengming Zhou <chengming.zhou@linux.dev>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Usama Arif <usamaarif642@gmail.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Hailong Liu <hailong.liu@oppo.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Kairui Song <kasong@tencent.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v6.13:
UAPI Changes:
- Add 1X7X5 media-bus formats.
Cross-subsystem Changes:
- Maintainer updates for VKMS and IT6263.
- Add media-bus-fmt for MEDIA_BUS_FMT_RGB101010_1X7X5_*.
- Add IT6263 DT bindings and driver.
Core Changes:
- Add ABGR210101010 support to panic handler.
- Use ATOMIC64_INIT in drm_file.c
- Improve scheduler teardown documentation.
Driver Changes:
- Make mediatek compile on ARM again.
- Add missing drm/drm_bridge.h header include, already in drm-next.
- Small fixes and cleanups to vkms, bridge/it6505, panfrost, panthor.
- Add panic support to nouveau for nv50+.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/344afe41-d27b-408a-8542-bfecfd3555f6@linux.intel.com
|
|
Remove platform data & initialize with defaults
configuration & overwrite based on DT properties.
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Message-ID: <20241007090426.811736-1-naresh.solanki@9elements.com>
[groeck: Dropped some unnecessary empty lines]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Several drivers return the same static value in their is_visible
callback, what results in code duplication. Therefore add an option
for drivers to specify a static visibility directly.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Message-ID: <89690b81-2c73-47ae-9ae9-45c77b45ca0c@gmail.com>
groeck: Renamed hwmon_ops_is_visible -> hwmon_is_visible
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"20 hotfixes, 14 of which are cc:stable.
Three affect DAMON. Lorenzo's five-patch series to address the
mmap_region error handling is here also.
Apart from that, various singletons"
* tag 'mm-hotfixes-stable-2024-11-09-22-40' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mailmap: add entry for Thorsten Blum
ocfs2: remove entry once instead of null-ptr-dereference in ocfs2_xa_remove()
signal: restore the override_rlimit logic
fs/proc: fix compile warning about variable 'vmcore_mmap_ops'
ucounts: fix counter leak in inc_rlimit_get_ucounts()
selftests: hugetlb_dio: check for initial conditions to skip in the start
mm: fix docs for the kernel parameter ``thp_anon=``
mm/damon/core: avoid overflow in damon_feed_loop_next_input()
mm/damon/core: handle zero schemes apply interval
mm/damon/core: handle zero {aggregation,ops_update} intervals
mm/mlock: set the correct prev on failure
objpool: fix to make percpu slot allocation more robust
mm/page_alloc: keep track of free highatomic
mm: resolve faulty mmap_region() error path behaviour
mm: refactor arch_calc_vm_flag_bits() and arm64 MTE handling
mm: refactor map_deny_write_exec()
mm: unconditionally close VMAs on error
mm: avoid unsafe VMA hook invocation when error arises on mmap hook
mm/thp: fix deferred split unqueue naming and locking
mm/thp: fix deferred split queue not partially_mapped
|
|
Create a mapping between a netdev and its neighoburs,
allowing for much cheaper flushes.
Signed-off-by: Gilad Naaman <gnaaman@drivenets.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20241107160444.2913124-7-gnaaman@drivenets.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove the now-unused neighbour::next pointer, leaving struct neighbour
solely with the hlist_node implementation.
Signed-off-by: Gilad Naaman <gnaaman@drivenets.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241107160444.2913124-6-gnaaman@drivenets.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove all usage of the bare neighbour::next pointer,
replacing them with neighbour::hash and its for_each macro.
Signed-off-by: Gilad Naaman <gnaaman@drivenets.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241107160444.2913124-5-gnaaman@drivenets.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce neigh_for_each_in_bucket in neighbour.h, to help iterate over
the neighbour table more succinctly.
Signed-off-by: Gilad Naaman <gnaaman@drivenets.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241107160444.2913124-3-gnaaman@drivenets.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a doubly-linked node to neighbours, so that they
can be deleted without iterating the entire bucket they're in.
Signed-off-by: Gilad Naaman <gnaaman@drivenets.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20241107160444.2913124-2-gnaaman@drivenets.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
MCTP control protocol implementations are transport binding dependent.
Endpoint discovery is mandatory based on transport binding.
Message timing requirements are specified in each respective transport
binding specification.
However, we currently have no means to get this information from MCTP
links.
Add a IFLA_MCTP_PHYS_BINDING netlink link attribute, which represents
the transport type using the DMTF DSP0239-defined type numbers, returned
as part of RTM_GETLINK data.
We get an IFLA_MCTP_PHYS_BINDING attribute for each MCTP link, for
example:
- 0x00 (unspec) for loopback interface;
- 0x01 (SMBus/I2C) for mctpi2c%d interfaces; and
- 0x05 (serial) for mctpserial%d interfaces.
Signed-off-by: Khang Nguyen <khangng@os.amperecomputing.com>
Reviewed-by: Matt Johnston <matt@codeconstruct.com.au>
Link: https://patch.msgid.link/20241105071915.821871-1-khangng@os.amperecomputing.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
No more users.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20241104093609.156059-7-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
This is to avoid tripping up kernel-doc which filters it out before
but not after the name.
Note the formatting is less than ideal as a result so we may revisit
in future.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Merge v6.12-rc6 via char-misc-next to get some fixes needed for next few
patches in IIO.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Fix the ACPI processor driver initialization ordering after recent
changes to avoid calling init_freq_invariance_cppc() too early on AMD
platforms (Mario Limonciello)"
* tag 'acpi-6.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: processor: Move arch_init_invariance_cppc() call later
|
|
On 2 x Intel Sapphire Rapids machines with 224 logical CPUs, a poorly
behaving BPF scheduler can live-lock the system by making multiple CPUs bang
on the same DSQ to the point where soft-lockup detection triggers before
SCX's own watchdog can take action. It also seems possible that the machine
can be live-locked enough to prevent scx_ops_helper, which is an RT task,
from running in a timely manner.
Implement scx_softlockup() which is called when three quarters of
soft-lockup threshold has passed. The function immediately enables the ops
breather and triggers an ops error to initiate ejection of the BPF
scheduler.
The previous and this patch combined enable the kernel to reliably recover
the system from live-lock conditions that can be triggered by a poorly
behaving BPF scheduler on Intel dual socket systems.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
|
|
Tracepoint strings don't require newlines (and in fact, they are
undesirable).
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Add the __counted_by compiler attribute to the flexible array member
buckets to improve access bounds-checking via CONFIG_UBSAN_BOUNDS and
CONFIG_FORTIFY_SOURCE.
Compile-tested only.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
Prepare for an embedded structure design for driver-level iommufd_viommu
objects:
// include/linux/iommufd.h
struct iommufd_viommu {
struct iommufd_object obj;
....
};
// Some IOMMU driver
struct iommu_driver_viommu {
struct iommufd_viommu core;
....
};
It has to expose struct iommufd_object and enum iommufd_object_type from
the core-level private header to the public iommufd header.
Link: https://patch.msgid.link/r/54a43b0768089d690104530754f499ca05ce0074.1730836219.git.nicolinc@nvidia.com
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Here is a (hopefully) final round of arm64 fixes for 6.12 that address
some user-visible floating point register corruption. Both of the
Marks have been working on this for a couple of weeks and we've ended
up in a position where SVE is solid but SME still has enough pending
issues that the most pragmatic solution for the release and stable
backports is to disable the feature. Yes, it's a shame, but the
hardware is rare as hen's teeth at the moment and we're better off
getting back to a known good state before fixing it all properly.
We're also improving the selftests for 6.13 to help avoid merging
broken code in the future.
Anyway, the good news is that we're removing a lot more code than
we're adding.
Summary:
- Fix handling of SVE traps from userspace on preemptible kernels
when converting the saved floating point state into SVE state.
- Remove broken support for the SMCCCv1.3 "SVE discard hint"
optimisation.
- Disable SME support, as the current support code suffers from
numerous issues around signal delivery, ptrace access and
context-switch which can lead to user-visible corruption of the
register state"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Kconfig: Make SME depend on BROKEN for now
arm64: smccc: Remove broken support for SMCCCv1.3 SVE discard hint
arm64/sve: Discard stale CPU state when handling SVE traps
|
|
KVM/riscv changes for 6.13
- Accelerate KVM RISC-V when running as a guest
- Perf support to collect KVM guest statistics from host side
|
|
Add preparation patches for coming soon DCD changes.
- Add range_overlaps()
- Add CDAT/DSMAS shared and read only flag in ACPICA
- Add documentation to struct dev_dax_range
- Delay event buffer allocation in CXL PCI
- Use guard() in cxl_dpa_set_mode()
- Refactor common create region code to reduce redudant code
|
|
The Coherent Device Attribute Table (CDAT) Device Scoped Memory Affinity
Structure (DSMAS) version 1.04 [1] defines flags to indicate if a DPA range
is read only and/or shared.
Add read only and shareable flag definitions.
This change was merged in ACPICA via PR 976.[2]
Link: https://uefi.org/sites/default/files/resources/Coherent%20Device%20Attribute%20Table_1.04%20published_0.pdf [1]
Link: https://github.com/acpica/acpica/pull/976 [2]
Cc: Robert Moore <robert.moore@intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: linux-acpi@vger.kernel.org
Cc: acpica-devel@lists.linux.dev
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/20241107-dcd-type2-upstream-v7-2-56a84e66bc36@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Code to support CXL Dynamic Capacity devices will have extent ranges
which need to be compared for intersection not a subset as is being
checked in range_contains().
range_overlaps() is defined in btrfs with a different meaning from what
is required in the standard range code. Dan Williams pointed this out
in [1]. Adjust the btrfs call according to his suggestion there.
Then add a generic range_overlaps().
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: David Sterba <dsterba@suse.com>
Cc: linux-btrfs@vger.kernel.org
Link: https://lore.kernel.org/all/65949f79ef908_8dc68294f2@dwillia2-xfh.jf.intel.com.notmuch/ [1]
Acked-by: David Sterba <dsterba@suse.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/20241107-dcd-type2-upstream-v7-1-56a84e66bc36@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Add another bits helper to regmap API: this one sets given bits if value
is true and clears them if it's false.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://patch.msgid.link/20241108-assign-bits-v1-1-382790562d99@ideasonboard.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The iommu core is going to support domain replacement for pasid, it needs
to make the set_dev_pasid op support replacing domain and keep the old
domain config in the failure case.
AMD iommu driver does not support domain replacement for pasid yet, so it
would fail the set_dev_pasid op to keep the old config if the input @old
is non-NULL. Till now, all the set_dev_pasid callbacks can handle the old
parameter and can keep the old config when failed, so update the kdoc of
set_dev_pasid op.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20241107122234.7424-14-yi.l.liu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
To support domain replacement for pasid, the underlying iommu driver needs
to know the old domain hence be able to clean up the existing attachment.
It would be much convenient for iommu layer to pass down the old domain.
Otherwise, iommu drivers would need to track domain for pasids by
themselves, this would duplicate code among the iommu drivers. Or iommu
drivers would rely group->pasid_array to get domain, which may not always
the correct one.
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20241107122234.7424-2-yi.l.liu@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The old hans.verkuil@cisco.com email address was discontinued years ago.
Replace it with the correct hansverk@cisco.com email.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
|
|
Convert the "tos" parameter of ip_route_output() to dscp_t. This way
we'll have a dscp_t value directly available when .flowi4_tos will
eventually be converted to dscp_t.
All ip_route_output() callers but one set this "tos" parameter to 0 and
therefore don't need to be adapted to the new prototype.
Only br_nf_pre_routing_finish() needs conversion. It can just use
ip4h_dscp() to get the DSCP field from the IPv4 header.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/0f10d031dd44c70aae9bc6e19391cb30d5c2fe71.1730928699.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
bcm_config_lre_aneg() doesn't use genphy_config_eee_advert() any longer.
As this was the only user, we can remove genphy_config_eee_advert() now.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/37da7f3e-b883-4c07-9881-b8c0516822b7@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
genphy_c45_write_eee_adv() isn't used outside phy-c45.c,
so make it static.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/d23bd784-44e6-4a15-af3a-b37379156521@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-next
amd-drm-next-6.13-2024-11-06:
amdgpu:
- Misc cleanups
- OLED fixes
- DCN 4.x fixes
- DCN 3.5 fixes
- 8K fixes
- IPS fixes
- DSC fixes
- S3 fix
- KASAN fix
- SMU13 fixes
- fdinfo fixes
- USB-C fixes
- ACPI fix
- Fix dummy page overlapping mappings
- Fix workload profile handling
- Add user control for zero RPM on SMU13
- Cleaner shader updates
- Stop syncing PRT map operations
- Debugfs permissions fixes
- Debugfs bounds check fix
- RAS cleanups
- Enforce isolation updates
amdkfd:
- Add topology cap flag for per queue reset
- Add an interface to query whether KFD queues are present
- Use dynamic allocation for get_cu_occupancy
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241106163904.189108-1-alexander.deucher@amd.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
commit f1be1788a32e ("block: model freeze & enter queue as lock for
supporting lockdep") tries to apply lockdep for verifying freeze &
unfreeze. However, the verification is only done the outmost freeze and
unfreeze. This way is actually not correct because q->mq_freeze_depth
still may drop to zero on other task instead of the freeze owner task.
Fix this issue by always verifying the last unfreeze lock on the owner
task context, and make sure both the outmost freeze & unfreeze are
verified in the current task.
Fixes: f1be1788a32e ("block: model freeze & enter queue as lock for supporting lockdep")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20241031133723.303835-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Encode the type into the bottom four bits of page->private and the info
into the remaining bits. Also turn the bootmem type into a named enum.
[arnd@arndb.de: bootmem: add bootmem_type stub function]
Link: https://lkml.kernel.org/r/20241015143802.577613-1-arnd@kernel.org
[akpm@linux-foundation.org: fix build with !CONFIG_HAVE_BOOTMEM_INFO_NODE]
Link: https://lore.kernel.org/oe-kbuild-all/202410090311.eaqcL7IZ-lkp@intel.com/
Link: https://lkml.kernel.org/r/20241005200121.3231142-6-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: kernel test robot <lkp@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Now that page_pgoff() takes const pointers, we can constify the pointers
to a lot of functions.
Link: https://lkml.kernel.org/r/20241005200121.3231142-5-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This function doesn't modify any of its arguments, so if we make a few
other functions take const pointers, we can make page_address_in_vma()
take const pointers too. All of its callers have the containing folio
already, so pass that in as an argument instead of recalculating it. Also
add kernel-doc
Link: https://lkml.kernel.org/r/20241005200121.3231142-4-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "page->index removals in mm", v2.
As part of shrinking struct page, we need to stop using page->index. This
patchset gets rid of most of the remaining references to page->index in
mm, as well as increasing the number of functions which take a const
folio/page pointer. It shrinks the text segment of mm by a few hundred
bytes in my test config, probably mostly from removing calls to
compound_head() in page_to_pgoff().
This patch (of 7):
Change the function signature to pass in the folio as all three callers
have it. This removes a reference to page->index, which we're trying to
get rid of. And add kernel-doc.
Link: https://lkml.kernel.org/r/20241005200121.3231142-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20241005200121.3231142-2-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Turn the private disk_zone_is_conv() function in blk-zoned.c into a
public and documented bdev_zone_is_seq() helper with the inverse
polarity of the original function, also adding a check for non-zoned
devices so that all file systems can use the helper, even with a regular
block device.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20241107064300.227731-3-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Ensure that a disk revalidation changing the conventional zones bitmap
of a disk does not cause invalid memory references when using the
disk_zone_is_conv() helper by RCU protecting the disk->conv_zones_bitmap
pointer.
disk_zone_is_conv() is modified to operate under the RCU read lock and
the function disk_set_conv_zones_bitmap() is added to update a disk
conv_zones_bitmap pointer using rcu_replace_pointer() with the disk
zone_wplugs_lock spinlock held.
disk_free_zone_resources() is modified to call
disk_update_zone_resources() with a NULL bitmap pointer to free the disk
conv_zones_bitmap. disk_set_conv_zones_bitmap() is also used in
disk_update_zone_resources() to set the new (revalidated) bitmap and
free the old one.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20241107064300.227731-2-dlemoal@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
pgalloc_tag_copy() and pgalloc_tag_split() are sizable and outside of any
performance-critical paths, so it should be fine to uninline them. Also
move their declarations into pgalloc_tag.h which seems like a more
appropriate place for them. No functional changes other than uninlining.
Link: https://lkml.kernel.org/r/20241024162318.1640781-1-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Yu Zhao <yuzhao@google.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Sourav Panda <souravpanda@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Implement support for storing page allocation tag references directly in
the page flags instead of page extensions. sysctl.vm.mem_profiling boot
parameter it extended to provide a way for a user to request this mode.
Enabling compression eliminates memory overhead caused by page_ext and
results in better performance for page allocations. However this mode
will not work if the number of available page flag bits is insufficient to
address all kernel allocations. Such condition can happen during boot or
when loading a module. If this condition is detected, memory allocation
profiling gets disabled with an appropriate warning. By default
compression mode is disabled.
Link: https://lkml.kernel.org/r/20241023170759.999909-7-surenb@google.com
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Daniel Gomez <da.gomez@samsung.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: David Rientjes <rientjes@google.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kalesh Singh <kaleshsingh@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Minchan Kim <minchan@google.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Petr Pavlu <petr.pavlu@suse.com>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Sourav Panda <souravpanda@google.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Huth <thuth@redhat.com>
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Xiongwei Song <xiongwei.song@windriver.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
