| Age | Commit message (Collapse) | Author |
|---|
|
Recent gcc versions started not systematically inline __arch_xprod64()
and that has performance implications. Give the compiler the freedom to
decide only when optimizing for size.
Here's some timing numbers from lib/math/test_div64.c
Using __always_inline:
```
test_div64: Starting 64bit/32bit division and modulo test
test_div64: Completed 64bit/32bit division and modulo test, 0.048285584s elapsed
```
Without __always_inline:
```
test_div64: Starting 64bit/32bit division and modulo test
test_div64: Completed 64bit/32bit division and modulo test, 0.053023584s elapsed
```
Forcing constant base through the non-constant base code path:
```
test_div64: Starting 64bit/32bit division and modulo test
test_div64: Completed 64bit/32bit division and modulo test, 0.103263776s elapsed
```
It is worth noting that test_div64 does half the test with non constant
divisors already so the impact is greater than what those numbers show.
And for what it is worth, those numbers were obtained using QEMU. The
gcc version is 14.1.0.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Several years later I just realized that this code could be greatly
simplified.
First, let's formalize the need for overflow handling in
__arch_xprod64(). Assuming n = UINT64_MAX, there are 2 cases where
an overflow may occur:
1) If a bias must be added, we have m_lo * n_lo + m or
m_lo * 0xffffffff + ((m_hi << 32) + m_lo) or
((m_lo << 32) - m_lo) + ((m_hi << 32) + m_lo) or
(m_lo + m_hi) << 32 which must be < (1 << 64). So the criteria for no
overflow is m_lo + m_hi < (1 << 32).
2) The cross product m_lo * n_hi + m_hi * n_lo or
m_lo * 0xffffffff + m_hi * 0xffffffff or
((m_lo << 32) - m_lo) + ((m_hi << 32) - m_hi). Assuming the top
result from the previous step (m_lo + m_hi) that must be added to
this, we get (m_lo + m_hi) << 32 again.
So let's have a straight and simpler version when this is true.
Otherwise some reordering allows for taking care of possible overflows
without any actual conditionals. And prevent from generating both code
variants by making sure this is considered only if m is perceived as
constant by the compiler.
This, in turn, allows for greatly simplifying __div64_const32(). The
"special case" may go as well as the regular case works just fine
without needing a bias. Then reduction should be applied all the time as
minimizing m is the key.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
page_to_pfn is usually implemented by pointer arithmetics on the memory
map, which means that bogus input can lead to even more bogus output.
Powerpc had a pfn_valid check on the intermediate pfn in the page_to_phys
implementation when CONFIG_DEBUG_VIRTUAL is defined, which seems
generally useful, so add that to the generic version.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
page_to_phys is duplicated by all architectures, and from some strange
reason placed in <asm/io.h> where it doesn't fit at all.
phys_to_page is only provided by a few architectures despite having a lot
of open coded users.
Provide generic versions in <asm-generic/memory_model.h> to make these
helpers more easily usable.
Note with this patch powerpc loses the CONFIG_DEBUG_VIRTUAL pfn_valid
check. It will be added back in a generic version later.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
With all subsystems and drivers either declaring their dependence on
HAS_IOPORT or fencing I/O port specific code sections we can finally
make inb()/outb() and friends compile-time dependent on HAS_IOPORT as
suggested by Linus in the linked mail. The main benefit of this is that
on platforms such as s390 which have no meaningful way of implementing
inb()/outb() their use without the proper HAS_IOPORT dependency will
result in easy to catch and fix compile-time errors instead of compiling
code that can never work.
Link: https://lore.kernel.org/lkml/CAHk-=wg80je=K7madF4e7WrRNp37e3qh6y10Svhdc7O8SZ_-8g@mail.gmail.com/
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Maciej W. Rozycki <macro@orcam.me.uk>
Acked-by: Damien Le Moal <dlemoal@kernel.org>
Acked-by: Jaroslav Kysela <perex@perex.cz>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net> # for ARCH=um
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Kalle Valo <kvalo@kernel.org>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Corey Minyard <cminyard@mvista.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Acked-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
In a future patch HAS_IOPORT=n will disable inb()/outb() and friends at
compile time. We thus need to add HAS_IOPORT as dependency for those
drivers using them unconditionally. Some 8250 serial drivers support
MMIO only use, so fence only the parts requiring I/O ports and print an
error message if a device can't be supported with the current
configuration.
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The third parameter to _IOR et al is a type name, not a size. So the
parameter being named "size" is irritating. Rename it to "argtype"
instead to reduce confusion.
There is a very minor chance that this breaks stuff. It only hurts
however if there is a variable (or macro) in userspace that is called
"argtype" *and* it's used in the parameters of _IOR and friends. IMHO
this is negligible because usually definitions making use of these
macros are provided by kernel headers (i.e. us) or if they are
replicated in userspace code, they are replicated and so supposed to
match the kernel definitions (e.g. to make them usable by programs
without the need to update the kernel headers used to compile the
program).
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The use of struct range in the CXL subsystem is growing. In particular,
the addition of Dynamic Capacity devices uses struct range in a number
of places which are reported in debug and error messages.
To wit requiring the printing of the start/end fields in each print
became cumbersome. Dan Williams mentions in [1] that it might be time
to have a print specifier for struct range similar to struct resource.
A few alternatives were considered including '%par', '%r', and '%pn'.
%pra follows that struct range is similar to struct resource (%p[rR])
but needs to be different. Based on discussions with Petr and Andy
'%pra' was chosen.[2]
Andy also suggested to keep the range prints similar to struct resource
though combined code. Add hex_range() to handle printing for both
pointer types.
Finally introduce DEFINE_RANGE() as a parallel to DEFINE_RES_*() and use
it in the tests.
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: open list <linux-kernel@vger.kernel.org>
Link: https://lore.kernel.org/all/663922b475e50_d54d72945b@dwillia2-xfh.jf.intel.com.notmuch/ [1]
Link: https://lore.kernel.org/all/66cea3bf3332f_f937b29424@iweiny-mobl.notmuch/ [2]
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241025-cxl-pra-v2-3-123a825daba2@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Flag KFD support for per-queue reset on GFX9 devices.
Signed-off-by: Jonathan Kim <jonathan.kim@amd.com>
Reviewed-by: Harish Kasiviswanathan <harish.kasiviswanathan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
A few drivers duplicate the code to retrieve ACPI device instance name.
Some of them want an associated driver data as well.
In order of deduplication introduce the common helper functions.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20241024191200.229894-6-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
PCI Express Interface PMU includes various performance counters
to monitor the data that is transmitted over the PCIe link. The
counters track various inbound and outbound transactions which
includes separate counters for posted/non-posted/completion TLPs.
Also, inbound and outbound memory read requests along with their
latencies can also be monitored. Address Translation Services(ATS)events
such as ATS Translation, ATS Page Request, ATS Invalidation along with
their corresponding latencies are also supported.
The performance counters are 64 bits wide.
For instance,
perf stat -e ib_tlp_pr <workload>
tracks the inbound posted TLPs for the workload.
Co-developed-by: Linu Cherian <lcherian@marvell.com>
Signed-off-by: Linu Cherian <lcherian@marvell.com>
Signed-off-by: Gowthami Thiagarajan <gthiagarajan@marvell.com>
Link: https://lore.kernel.org/r/20241028055309.17893-1-gthiagarajan@marvell.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Armv8.9/9.4 PMUv3.9 adds per counter EL0 access controls. Per counter
access is enabled with the UEN bit in PMUSERENR_EL1 register. Individual
counters are enabled/disabled in the PMUACR_EL1 register. When UEN is
set, the CR/ER bits control EL0 write access and must be set to disable
write access.
With the access controls, the clearing of unused counters can be
skipped.
KVM also configures PMUSERENR_EL1 in order to trap to EL2. UEN does not
need to be set for it since only PMUv3.5 is exposed to guests.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20241002184326.1105499-1-robh@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
range_contains() does not modify the range values. David suggested it
is safer to keep those parameters as const.[1]
Make range parameters const
Link: https://lore.kernel.org/all/20241008161032.GB1609@twin.jikos.cz/ [1]
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Link: https://patch.msgid.link/20241010-const-range-v1-1-afb6e4bfd8ce@intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
|
|
Define the IOMMU_IOAS_MAP_FILE ioctl interface, which allows a user to
register memory by passing a memfd plus offset and length. Implement it
using the memfd_pin_folios() kAPI.
Link: https://patch.msgid.link/r/1729861919-234514-8-git-send-email-steven.sistare@oracle.com
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Export a function that adds pins to an already-pinned huge-page folio.
This allows any range of small pages within the folio to be unpinned later.
For example, pages pinned via memfd_pin_folios and modified by
folio_add_pins could be unpinned via unpin_user_page(s).
Link: https://patch.msgid.link/r/1729861919-234514-2-git-send-email-steven.sistare@oracle.com
Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
With the introduction of an architecture-independent defintion of
PAGE_MASK, we had to make a choice between defining it as 'unsigned long'
as on 64-bit architectures, or as signed 'long' as required for
architectures with a 64-bit phys_addr_t.
To reduce the risk for regressions and minimize the changes in behavior,
the result was using the signed value only when CONFIG_PHYS_ADDR_T_64BIT
is set, but that ended up causing a regression after all in the
early_init_dt_add_memory_arch() function that uses 64-bit integers for
address calculation.
Presumably the same regression also affects mips32 and powerpc32 when
dealing with large amounts of memory on DT platforms: like arm32, they were
using the signed version unconditionally.
The two most sensible options for addressing the regression are either to
go back to an architecture specific definition, using a signed constant on
arm/powerpc/mips and unsigned on the others, or to use the same definition
everywhere.
Use the simpler of those two and change them all to the signed version, in
the hope that this does not cause a different type of bug. Most of the
other 32-bit architectures have no large physical address support and are
rarely used, so it seems more likely that using the same definition helps
than hurts here.
In particular, x86-32 does have physical addressing extensions, so it
already changed to the signed version after the previous patch, so it makes
sense to use the same version on non-PAE as well.
Fixes: efe8419ae78d ("vdso: Introduce vdso/page.h")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Tested-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lore.kernel.org/all/20241024133447.3117273-1-arnd@kernel.org
Link: https://lore.kernel.org/lkml/CA+G9fYt86bUAu_v5dXPWnDUwQNVipj+Wq3Djir1KUSKdr9QLNg@mail.gmail.com/
|
|
The v4l2_detect_cvt/gtf functions should check the result against the
timing capabilities: these functions calculate the timings, so if they
are out of bounds, they should be rejected.
To do this, add the struct v4l2_dv_timings_cap as argument to those
functions.
This required updates to the adv7604 and adv7842 drivers since the
prototype of these functions has now changed. The timings struct
that is passed to v4l2_detect_cvt/gtf in those two drivers is filled
with the timings detected by the hardware.
The vivid driver was also updated, but an additional check was added:
the width and height specified by VIDIOC_S_DV_TIMINGS has to match the
calculated result, otherwise something went wrong. Note that vivid
*emulates* hardware, so all the values passed to the v4l2_detect_cvt/gtf
functions came from the timings struct that was filled by userspace
and passed on to the driver via VIDIOC_S_DV_TIMINGS. So these fields
can contain random data. Both the constraints check via
struct v4l2_dv_timings_cap and the additional width/height check
ensure that the resulting timings are sane and not messed up by the
v4l2_detect_cvt/gtf calculations.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Fixes: 2576415846bc ("[media] v4l2: move dv-timings related code to v4l2-dv-timings.c")
Cc: stable@vger.kernel.org
Reported-by: syzbot+a828133770f62293563e@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/linux-media/000000000000013050062127830a@google.com/
|
|
Enable setting flag FS_CASEFOLD_FL for tmpfs directories, when tmpfs is
mounted with casefold support. A special check is need for this flag,
since it can't be set for non-empty directories.
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Reviewed-by: Gabriel Krisman Bertazi <gabriel@krisman.be>
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/r/20241021-tonyk-tmpfs-v8-7-f443d5814194@igalia.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Export generic_ci_ dentry functions so they can be used by
case-insensitive filesystems that need something more custom than the
default one set by `struct generic_ci_dentry_ops`.
Reviewed-by: Gabriel Krisman Bertazi <gabriel@krisman.be>
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/r/20241021-tonyk-tmpfs-v8-5-f443d5814194@igalia.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
All filesystems that currently support UTF-8 casefold can fetch the
UTF-8 version from the filesystem metadata stored on disk. They can get
the data stored and directly match it to a integer, so they can skip the
string parsing step, which motivated the removal of this function in the
first place.
However, for tmpfs, the only way to tell the kernel which UTF-8 version
we are about to use is via mount options, using a string. Re-introduce
utf8_parse_version() to be used by tmpfs.
This version differs from the original by skipping the intermediate step
of copying the version string to an auxiliary string before calling
match_token(). This versions calls match_token() in the argument string.
The paramenters are simpler now as well.
utf8_parse_version() was created by 9d53690f0d4 ("unicode: implement
higher level API for string handling") and later removed by 49bd03cc7e9
("unicode: pass a UNICODE_AGE() tripple to utf8_load").
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/r/20241021-tonyk-tmpfs-v8-4-f443d5814194@igalia.com
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Export latest available UTF-8 version number so filesystems can easily
load the newest one.
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/r/20241021-tonyk-tmpfs-v8-3-f443d5814194@igalia.com
Acked-by: Gabriel Krisman Bertazi <krisman@suse.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Create a helper function for filesystems do the checks required for
casefold directories and strict encoding.
Suggested-by: Gabriel Krisman Bertazi <krisman@suse.de>
Reviewed-by: Gabriel Krisman Bertazi <gabriel@krisman.be>
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/r/20241021-tonyk-tmpfs-v8-1-f443d5814194@igalia.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Most of the callers of wbc_account_cgroup_owner() are converting a folio
to page before calling the function. wbc_account_cgroup_owner() is
converting the page back to a folio to call mem_cgroup_css_from_folio().
Convert wbc_account_cgroup_owner() to take a folio instead of a page,
and convert all callers to pass a folio directly except f2fs.
Convert the page to folio for all the callers from f2fs as they were the
only callers calling wbc_account_cgroup_owner() with a page. As f2fs is
already in the process of converting to folios, these call sites might
also soon be calling wbc_account_cgroup_owner() with a folio directly in
the future.
No functional changes. Only compile tested.
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Link: https://lore.kernel.org/r/20240926140121.203821-1-kernel@pankajraghav.com
Acked-by: David Sterba <dsterba@suse.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The last use of devm_snd_soc_register_dai() was removed by
commit fc4cb1e15f0c ("ASoC: topology: Properly unregister DAI on removal")
in 2021.
Remove it, and the helper it used.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20241028021226.477909-1-linux@treblig.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When cloning a new thread, its posix_cputimers are not inherited, and
are cleared by posix_cputimers_init(). However, this does not clear the
tick dependency it creates in tsk->tick_dep_mask, and the handler does
not reach the code to clear the dependency if there were no timers to
begin with.
Thus if a thread has a cputimer running before clone/fork, all
descendants will prevent nohz_full unless they create a cputimer of
their own.
Fix this by entirely clearing the tick_dep_mask in copy_process().
(There is currently no inherited state that needs a tick dependency)
Process-wide timers do not have this problem because fork does not copy
signal_struct as a baseline, it creates one from scratch.
Fixes: b78783000d5c ("posix-cpu-timers: Migrate to use new tick dependency mask model")
Signed-off-by: Ben Segall <bsegall@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/xm26o737bq8o.fsf@google.com
|
|
Recently we got several deadlock report[1][2][3] caused by
blk_mq_freeze_queue and blk_enter_queue().
Turns out the two are just like acquiring read/write lock, so model them
as read/write lock for supporting lockdep:
1) model q->q_usage_counter as two locks(io and queue lock)
- queue lock covers sync with blk_enter_queue()
- io lock covers sync with bio_enter_queue()
2) make the lockdep class/key as per-queue:
- different subsystem has very different lock use pattern, shared lock
class causes false positive easily
- freeze_queue degrades to no lock in case that disk state becomes DEAD
because bio_enter_queue() won't be blocked any more
- freeze_queue degrades to no lock in case that request queue becomes dying
because blk_enter_queue() won't be blocked any more
3) model blk_mq_freeze_queue() as acquire_exclusive & try_lock
- it is exclusive lock, so dependency with blk_enter_queue() is covered
- it is trylock because blk_mq_freeze_queue() are allowed to run
concurrently
4) model blk_enter_queue() & bio_enter_queue() as acquire_read()
- nested blk_enter_queue() are allowed
- dependency with blk_mq_freeze_queue() is covered
- blk_queue_exit() is often called from other contexts(such as irq), and
it can't be annotated as lock_release(), so simply do it in
blk_enter_queue(), this way still covered cases as many as possible
With lockdep support, such kind of reports may be reported asap and
needn't wait until the real deadlock is triggered.
For example, lockdep report can be triggered in the report[3] with this
patch applied.
[1] occasional block layer hang when setting 'echo noop > /sys/block/sda/queue/scheduler'
https://bugzilla.kernel.org/show_bug.cgi?id=219166
[2] del_gendisk() vs blk_queue_enter() race condition
https://lore.kernel.org/linux-block/20241003085610.GK11458@google.com/
[3] queue_freeze & queue_enter deadlock in scsi
https://lore.kernel.org/linux-block/ZxG38G9BuFdBpBHZ@fedora/T/#u
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20241025003722.3630252-4-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add non_owner variant of start_freeze/unfreeze queue APIs, so that the
caller knows that what they are doing, and we can skip lockdep support
for non_owner variant in per-call level.
Prepare for supporting lockdep for freezing/unfreezing queue.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20241025003722.3630252-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
|
|
Provide dt-schema documentation for Samsung Exynos8895 SoC clock
controller CMU blocks:
- CMU_FSYS0/1
- CMU_PERIC0/1
- CMU_PERIS
- CMU_TOP
Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@gmail.com>
Link: https://lore.kernel.org/r/20241023090136.537395-2-ivo.ivanov.ivanov1@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
In support of investigating an initialization failure report [1],
cxl_test was updated to register mock memory-devices after the mock
root-port/bus device had been registered. That led to cxl_test crashing
with a use-after-free bug with the following signature:
cxl_port_attach_region: cxl region3: cxl_host_bridge.0:port3 decoder3.0 add: mem0:decoder7.0 @ 0 next: cxl_switch_uport.0 nr_eps: 1 nr_targets: 1
cxl_port_attach_region: cxl region3: cxl_host_bridge.0:port3 decoder3.0 add: mem4:decoder14.0 @ 1 next: cxl_switch_uport.0 nr_eps: 2 nr_targets: 1
cxl_port_setup_targets: cxl region3: cxl_switch_uport.0:port6 target[0] = cxl_switch_dport.0 for mem0:decoder7.0 @ 0
1) cxl_port_setup_targets: cxl region3: cxl_switch_uport.0:port6 target[1] = cxl_switch_dport.4 for mem4:decoder14.0 @ 1
[..]
cxld_unregister: cxl decoder14.0:
cxl_region_decode_reset: cxl_region region3:
mock_decoder_reset: cxl_port port3: decoder3.0 reset
2) mock_decoder_reset: cxl_port port3: decoder3.0: out of order reset, expected decoder3.1
cxl_endpoint_decoder_release: cxl decoder14.0:
[..]
cxld_unregister: cxl decoder7.0:
3) cxl_region_decode_reset: cxl_region region3:
Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6bc3: 0000 [#1] PREEMPT SMP PTI
[..]
RIP: 0010:to_cxl_port+0x8/0x60 [cxl_core]
[..]
Call Trace:
<TASK>
cxl_region_decode_reset+0x69/0x190 [cxl_core]
cxl_region_detach+0xe8/0x210 [cxl_core]
cxl_decoder_kill_region+0x27/0x40 [cxl_core]
cxld_unregister+0x5d/0x60 [cxl_core]
At 1) a region has been established with 2 endpoint decoders (7.0 and
14.0). Those endpoints share a common switch-decoder in the topology
(3.0). At teardown, 2), decoder14.0 is the first to be removed and hits
the "out of order reset case" in the switch decoder. The effect though
is that region3 cleanup is aborted leaving it in-tact and
referencing decoder14.0. At 3) the second attempt to teardown region3
trips over the stale decoder14.0 object which has long since been
deleted.
The fix here is to recognize that the CXL specification places no
mandate on in-order shutdown of switch-decoders, the driver enforces
in-order allocation, and hardware enforces in-order commit. So, rather
than fail and leave objects dangling, always remove them.
In support of making cxl_region_decode_reset() always succeed,
cxl_region_invalidate_memregion() failures are turned into warnings.
Crashing the kernel is ok there since system integrity is at risk if
caches cannot be managed around physical address mutation events like
CXL region destruction.
A new device_for_each_child_reverse_from() is added to cleanup
port->commit_end after all dependent decoders have been disabled. In
other words if decoders are allocated 0->1->2 and disabled 1->2->0 then
port->commit_end only decrements from 2 after 2 has been disabled, and
it decrements all the way to zero since 1 was disabled previously.
Link: http://lore.kernel.org/20241004212504.1246-1-gourry@gourry.net [1]
Cc: stable@vger.kernel.org
Fixes: 176baefb2eb5 ("cxl/hdm: Commit decoder state to hardware")
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Zijun Hu <quic_zijuhu@quicinc.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Link: https://patch.msgid.link/172964782781.81806.17902885593105284330.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
|
|
Use blk_mq_quiesce_tagset() instead of ufshcd_scsi_block_requests() and
blk_mq_wait_quiesce_done(). Since this patch removes the last callers of
ufshcd_scsi_block_requests() and ufshcd_scsi_unblock_requests(), remove
these functions.
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241022193130.2733293-6-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Move the ufshcd_mcq_enable_esi() definition such that it occurs
immediately before the ufshcd_mcq_config_esi() definition.
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241022193130.2733293-2-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Replace UFSHCD_QUIRK_BROKEN_64BIT_ADDRESS with
ufs_hba_variant_ops::set_dma_mask. Update the Renesas driver
accordingly. This patch enables supporting other configurations than
32-bit or 64-bit DMA addresses, e.g. 36-bit DMA addresses.
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20241018194753.775074-1-bvanassche@acm.org
Reviewed-by: Avri Altman <Avri.Altman@wdc.com>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse fixes from Miklos Szeredi:
- Fix cached size after passthrough writes
This fix needed a trivial change in the backing-file API, which
resulted in some non-fuse files being touched.
- Revert a commit meant as a cleanup but which triggered a WARNING
- Remove a stray debug line left-over
* tag 'fuse-fixes-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
fuse: remove stray debug line
Revert "fuse: move initialization of fuse_file to fuse_writepages() instead of in callback"
fuse: update inode size after extending passthrough write
fs: pass offset and result to backing_file end_write() callback
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes from Helge Deller:
- Fix some build warnings and failures with CONFIG_FB_IOMEM_FOPS and
CONFIG_FB_DEVICE
- Remove the da8xx fbdev driver
- Constify struct sbus_mmap_map and fix indentation warning
* tag 'fbdev-for-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: wm8505fb: select CONFIG_FB_IOMEM_FOPS
fbdev: da8xx: remove the driver
fbdev: Constify struct sbus_mmap_map
fbdev: nvidiafb: fix inconsistent indentation warning
fbdev: sstfb: Make CONFIG_FB_DEVICE optional
|
|
The details about the handling of the "normal" values were moved
to the _msecs_to_jiffies() helpers in commit ca42aaf0c861 ("time:
Refactor msecs_to_jiffies"). However, the same commit still mentioned
__msecs_to_jiffies() in the added documentation.
Thus point to _msecs_to_jiffies() instead.
Fixes: ca42aaf0c861 ("time: Refactor msecs_to_jiffies")
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20241025110141.157205-2-ojeda@kernel.org
|
|
struct timekeeper is ordered suboptimal vs. cachelines. The layout,
including the preceding seqcount (see struct tk_core in timekeeper.c) is:
cacheline 0: seqcount, tkr_mono
cacheline 1: tkr_raw, xtime_sec
cacheline 2: ktime_sec ... tai_offset, internal variables
cacheline 3: next_leap_ktime, raw_sec, internal variables
cacheline 4: internal variables
So any access to via ktime_get*() except for access to CLOCK_MONOTONIC_RAW
will use either cachelines 0 + 1 or cachelines 0 + 2. Access to
CLOCK_MONOTONIC_RAW uses cachelines 0 + 1 + 3.
Reorder the members so that the result is more efficient:
cacheline 0: seqcount, tkr_mono
cacheline 1: xtime_sec, ktime_sec ... tai_offset
cacheline 2: tkr_raw, raw_sec
cacheline 3: internal variables
cacheline 4: internal variables
That means ktime_get*() will access cacheline 0 + 1 and CLOCK_MONOTONIC_RAW
access will use cachelines 0 + 2.
Update kernel-doc and fix formatting issues while at it. Also fix a typo
in struct tk_read_base kernel-doc.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Link: https://lore.kernel.org/all/20241015100839.12702-1-anna-maria@linutronix.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"The majority of changes here are about ASoC.
There are two core changes in ASoC (the bump of minimal topology ABI
version and the fix for references of components in DAPM code), and
others are mostly various device-specific fixes for SoundWire, AMD,
Intel, SOF, Qualcomm and FSL, in addition to a few usual HD-audio
quirks and fixes"
* tag 'sound-6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (33 commits)
ALSA: hda/realtek: Update default depop procedure
ASoC: qcom: sc7280: Fix missing Soundwire runtime stream alloc
ASoC: fsl_micfil: Add sample rate constraint
ASoC: rt722-sdca: increase clk_stop_timeout to fix clock stop issue
ALSA: hda/tas2781: select CRC32 instead of CRC32_SARWATE
ALSA: hda/realtek: Add subwoofer quirk for Acer Predator G9-593
ALSA: firewire-lib: Avoid division by zero in apply_constraint_to_size()
ASoC: fsl_micfil: Add a flag to distinguish with different volume control types
ASoC: codecs: lpass-rx-macro: fix RXn(rx,n) macro for DSM_CTL and SEC7 regs
ASoC: Change my e-mail to gmail
ASoC: Intel: soc-acpi: lnl: Add match entry for TM2 laptops
ASoC: amd: yc: Fix non-functional mic on ASUS E1404FA
ASoC: SOF: Intel: hda: Always clean up link DMA during stop
soundwire: intel_ace2x: Send PDI stream number during prepare
ASoC: SOF: Intel: hda: Handle prepare without close for non-HDA DAI's
ASoC: SOF: ipc4-topology: Do not set ALH node_id for aggregated DAIs
MAINTAINERS: Update maintainer list for MICROCHIP ASOC, SSC and MCP16502 drivers
ASoC: qcom: Select missing common Soundwire module code on SDM845
ASoC: fsl_esai: change dev_warn to dev_dbg in irq handler
ASoC: rsnd: Fix probe failure on HiHope boards due to endpoint parsing
...
|
|
Now that KVM no longer relies on an ugly heuristic to find its struct page
references, i.e. now that KVM can't get false positives on VM_MIXEDMAP
pfns, remove KVM's hack to elevate the refcount for pfns that happen to
have a valid struct page. In addition to removing a long-standing wart
in KVM, this allows KVM to map non-refcounted struct page memory into the
guest, e.g. for exposing GPU TTM buffers to KVM guests.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-86-seanjc@google.com>
|
|
Remove all kvm_{release,set}_pfn_*() APIs now that all users are gone.
No functional change intended.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-85-seanjc@google.com>
|
|
Drop gfn_to_pfn() and all its variants now that all users are gone.
No functional change intended.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-80-seanjc@google.com>
|
|
Rework gfn_to_page() to support read-only accesses so that it can be used
by arm64 to get MTE tags out of guest memory.
Opportunistically rewrite the comment to be even more stern about using
gfn_to_page(), as there are very few scenarios where requiring a struct
page is actually the right thing to do (though there are such scenarios).
Add a FIXME to call out that KVM probably should be pinning pages, not
just getting pages.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-77-seanjc@google.com>
|
|
Move KVM x86's helper that "finishes" the faultin process to common KVM
so that the logic can be shared across all architectures. Note, not all
architectures implement a fast page fault path, but the gist of the
comment applies to all architectures.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-50-seanjc@google.com>
|
|
Provide the "struct page" associated with a guest_memfd pfn as an output
from __kvm_gmem_get_pfn() so that KVM guest page fault handlers can
directly put the page instead of having to rely on
kvm_pfn_to_refcounted_page().
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-47-seanjc@google.com>
|
|
Add a new dedicated API, kvm_faultin_pfn(), for servicing guest page
faults, i.e. for getting pages/pfns that will be mapped into the guest via
an mmu_notifier-protected KVM MMU. Keep struct kvm_follow_pfn buried in
internal code, as having __kvm_faultin_pfn() take "out" params is actually
cleaner for several architectures, e.g. it allows the caller to have its
own "page fault" structure without having to marshal data to/from
kvm_follow_pfn.
Long term, common KVM would ideally provide a kvm_page_fault structure, a
la x86's struct of the same name. But all architectures need to be
converted to a common API before that can happen.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-44-seanjc@google.com>
|
|
Move the memslot lookup helpers further up in kvm_host.h so that they can
be used by inlined "to pfn" wrappers.
No functional change intended.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-43-seanjc@google.com>
|
|
Now that all kvm_vcpu_{,un}map() users pass "true" for @dirty, have them
pass "true" as a @writable param to kvm_vcpu_map(), and thus create a
read-only mapping when possible.
Note, creating read-only mappings can be theoretically slower, as they
don't play nice with fast GUP due to the need to break CoW before mapping
the underlying PFN. But practically speaking, creating a mapping isn't
a super hot path, and getting a writable mapping for reading is weird and
confusing.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-34-seanjc@google.com>
|
|
Pin, as in FOLL_PIN, pages when mapping them for direct access by KVM.
As per Documentation/core-api/pin_user_pages.rst, writing to a page that
was gotten via FOLL_GET is explicitly disallowed.
Correct (uses FOLL_PIN calls):
pin_user_pages()
write to the data within the pages
unpin_user_pages()
INCORRECT (uses FOLL_GET calls):
get_user_pages()
write to the data within the pages
put_page()
Unfortunately, FOLL_PIN is a "private" flag, and so kvm_follow_pfn must
use a one-off bool instead of being able to piggyback the "flags" field.
Link: https://lwn.net/Articles/930667
Link: https://lore.kernel.org/all/cover.1683044162.git.lstoakes@gmail.com
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-32-seanjc@google.com>
|
|
Migrate kvm_vcpu_map() to kvm_follow_pfn(), and have it track whether or
not the map holds a refcounted struct page. Precisely tracking struct
page references will eventually allow removing kvm_pfn_to_refcounted_page()
and its various wrappers.
Signed-off-by: David Stevens <stevensd@chromium.org>
[sean: use a pointer instead of a boolean]
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-31-seanjc@google.com>
|
|
Drop yet another unnecessary magic page value from KVM, as there's zero
reason to use a poisoned pointer to indicate "no page". If KVM uses a
NULL page pointer, the kernel will explode just as quickly as if KVM uses
a poisoned pointer. Never mind the fact that such usage would be a
blatant and egregious KVM bug.
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Tested-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20241010182427.1434605-23-seanjc@google.com>
|
