| Age | Commit message (Collapse) | Author |
|---|
|
Allow CPUfreq statistics to be cleared by writing anything to
/sys/.../cpufreq/stats/reset.
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
* clk-qcom-rpm:
clk: qcom: Add support for RPM Clocks
clk: qcom: Add support for SMD-RPM Clocks
clk: qcom: Always add factor clock for xo clocks
|
|
This adds initial support for clocks controlled by the Resource
Power Manager (RPM) processor on some Qualcomm SoCs, which use
the qcom_rpm driver to communicate with RPM.
Such platforms are apq8064 and msm8960.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
|
|
This adds initial support for clocks controlled by the Resource
Power Manager (RPM) processor on some Qualcomm SoCs, which use
the qcom_smd_rpm driver to communicate with RPM.
Such platforms are msm8916, apq8084 and msm8974.
The RPM is a dedicated hardware engine for managing the shared
SoC resources in order to keep the lowest power profile. It
communicates with other hardware subsystems via shared memory
and accepts clock requests, aggregates the requests and turns
the clocks on/off or scales them on demand.
This driver is based on the codeaurora.org driver:
https://www.codeaurora.org/cgit/quic/la/kernel/msm-3.10/tree/drivers/clk/qcom/clock-rpm.c
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
[sboyd@codeaurora.org: Remove useless braces for single line if]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
|
|
* clk-qcom-8994:
clk: qcom: Add support for msm8994 global clock controller
dt-bindings: qcom: clocks: Add msm8994 clock bindings
|
|
git://git.pengutronix.de/git/pza/linux into drm-next
imx-drm plane update cleanup, YUV formats
- request modeset if plane offsets changed, only the plane base
address can be changed without disabling the plane IDMAC channel.
- cleanup of plane atomic_update
- remove unused ipu_cpmem_set_yuv_planar function
- support YUV 4:4:4, 4:2:2, NV12 and NV16 plane formats
- not only mask interrupts during irq init, also clear them
- remove a legacy check from imx-ldb
- add support to set the CSI downsizing bits
- silence an obnoxious warning during modeset
* tag 'imx-drm-next-2016-11-10' of git://git.pengutronix.de/git/pza/linux:
gpu: ipu-di: silence videomode logspam
gpu: ipu-v3: add ipu_csi_set_downsize
drm/imx: imx-ldb: remove unnecessary double disable check
gpu: ipu-v3: initially clear all interrupts
drm/imx: ipuv3-plane: add support for YUV 4:2:2 and 4:4:4, NV12, and NV16 formats
gpu: ipu-v3: add YUV 4:4:4 support
gpu: ipu-cpmem: remove unused ipu_cpmem_set_yuv_planar function
drm/imx: ipuv3-plane: let drm_plane_state_to_ubo/vbo handle chroma subsampling other than 4:2:0
drm/imx: ipuv3-plane: merge ipu_plane_atomic_set_base into atomic_update
drm/imx: ipuv3-plane: request modeset if plane offsets changed
|
|
git://anongit.freedesktop.org/drm-intel into drm-next
- better atomic state debugging from Rob
- fence prep from gustavo
- sumits flushed out his backlog of pending dma-buf/fence patches from
various people
- drm_mm leak debugging plus trying to appease Kconfig (Chris)
- a few misc things all over
* tag 'topic/drm-misc-2016-11-10' of git://anongit.freedesktop.org/drm-intel: (35 commits)
drm: Make DRM_DEBUG_MM depend on STACKTRACE_SUPPORT
drm/i915: Restrict DRM_DEBUG_MM automatic selection
drm: Restrict stackdepot usage to builtin drm.ko
drm/msm: module param to dump state on error irq
drm/msm/mdp5: add atomic_print_state support
drm/atomic: add debugfs file to dump out atomic state
drm/atomic: add new drm_debug bit to dump atomic state
drm: add helpers to go from plane state to drm_rect
drm: add helper for printing to log or seq_file
drm: helper macros to print composite types
reservation: revert "wait only with non-zero timeout specified (v3)" v2
drm/ttm: fix ttm_bo_wait
dma-buf/fence: revert "don't wait when specified timeout is zero" (v2)
dma-buf/fence: make timeout handling in fence_default_wait consistent (v2)
drm/amdgpu: add the interface of waiting multiple fences (v4)
dma-buf: return index of the first signaled fence (v2)
MAINTAINERS: update Sync File Framework files
dma-buf/sw_sync: put fence reference from the fence creation
dma-buf/sw_sync: mark sync_timeline_create() static
drm: Add stackdepot include for DRM_DEBUG_MM
...
|
|
Signed-off-by: Jeremy McNicoll <jeremymc@redhat.com>
[sboyd@codeaurora.org: Dropped unused and incorrect GDSC defines]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
|
|
Enable throttling of buffered writeback to make it a lot
more smooth, and has way less impact on other system activity.
Background writeback should be, by definition, background
activity. The fact that we flush huge bundles of it at the time
means that it potentially has heavy impacts on foreground workloads,
which isn't ideal. We can't easily limit the sizes of writes that
we do, since that would impact file system layout in the presence
of delayed allocation. So just throttle back buffered writeback,
unless someone is waiting for it.
The algorithm for when to throttle takes its inspiration in the
CoDel networking scheduling algorithm. Like CoDel, blk-wb monitors
the minimum latencies of requests over a window of time. In that
window of time, if the minimum latency of any request exceeds a
given target, then a scale count is incremented and the queue depth
is shrunk. The next monitoring window is shrunk accordingly. Unlike
CoDel, if we hit a window that exhibits good behavior, then we
simply increment the scale count and re-calculate the limits for that
scale value. This prevents us from oscillating between a
close-to-ideal value and max all the time, instead remaining in the
windows where we get good behavior.
Unlike CoDel, blk-wb allows the scale count to to negative. This
happens if we primarily have writes going on. Unlike positive
scale counts, this doesn't change the size of the monitoring window.
When the heavy writers finish, blk-bw quickly snaps back to it's
stable state of a zero scale count.
The patch registers a sysfs entry, 'wb_lat_usec'. This sets the latency
target to me met. It defaults to 2 msec for non-rotational storage, and
75 msec for rotational storage. Setting this value to '0' disables
blk-wb. Generally, a user would not have to touch this setting.
We don't enable WBT on devices that are managed with CFQ, and have
a non-root block cgroup attached. If we have a proportional share setup
on this particular disk, then the wbt throttling will interfere with
that. We don't have a strong need for wbt for that case, since we will
rely on CFQ doing that for us.
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
We can hook this up to the block layer, to help throttle buffered
writes.
wbt registers a few trace points that can be used to track what is
happening in the system:
wbt_lat: 259:0: latency 2446318
wbt_stat: 259:0: rmean=2446318, rmin=2446318, rmax=2446318, rsamples=1,
wmean=518866, wmin=15522, wmax=5330353, wsamples=57
wbt_step: 259:0: step down: step=1, window=72727272, background=8, normal=16, max=32
This shows a sync issue event (wbt_lat) that exceeded it's time. wbt_stat
dumps the current read/write stats for that window, and wbt_step shows a
step down event where we now scale back writes. Each trace includes the
device, 259:0 in this case.
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
For legacy block, we simply track them in the request queue. For
blk-mq, we track them on a per-sw queue basis, which we can then
sum up through the hardware queues and finally to a per device
state.
The stats are tracked in, roughly, 0.1s interval windows.
Add sysfs files to display the stats.
The feature is off by default, to avoid any extra overhead. In-kernel
users of it can turn it on by setting QUEUE_FLAG_STATS in the queue
flags. We currently don't turn it on if someone just reads any of
the stats files, that is something we could add as well.
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
osdc->last_linger_id is a counter for lreq->linger_id, which is used
for watch cookies. Starting with a large integer should ease the task
of telling apart kernel and userspace clients.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
|
|
This adds a shared per-request structure for all NVMe I/O. This structure
is embedded as the first member in all NVMe transport drivers request
private data and allows to implement common functionality between the
drivers.
The first use is to replace the current abuse of the SCSI command
passthrough fields in struct request for the NVMe command passthrough,
but it will grow a field more fields to allow implementing things
like common abort handlers in the future.
The passthrough commands are handled by having a pointer to the SQE
(struct nvme_command) in struct nvme_request, and the union of the
possible result fields, which had to be turned from an anonymous
into a named union for that purpose. This avoids having to pass
a reference to a full CQE around and thus makes checking the result
a lot more lightweight.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
|
|
With CONFIG_OF enabled on x86, we get the following error on boot:
"
Failed to find cpu0 device node
Unable to detect cache hierarchy from DT for CPU 0
"
and the cacheinfo fails to get populated in the corresponding sysfs
entries. This is because cache_setup_of_node looks for of_node for
setting up the shared cpu_map without checking that it's already
populated in the architecture specific callback.
In order to indicate that the shared cpu_map is already populated, this
patch introduces a boolean `cpu_map_populated` in struct cpu_cacheinfo
that can be used by the generic code to skip cache_shared_cpu_map_setup.
This patch also sets that boolean for x86.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
FPGA Regions support programming FPGA under control of the Device
Tree.
Signed-off-by: Alan Tull <atull@opensource.altera.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This framework adds API functions for enabling/
disabling FPGA bridges under kernel control.
This allows the Linux kernel to disable FPGA bridges
during FPGA reprogramming and to enable FPGA bridges
when FPGA reprogramming is done. This framework is
be manufacturer-agnostic, allowing it to be used in
interfaces that use the FPGA Manager Framework to
reprogram FPGA's.
The functions are:
* of_fpga_bridge_get
* fpga_bridge_put
Get/put an exclusive reference to a FPGA bridge.
* fpga_bridge_enable
* fpga_bridge_disable
Enable/Disable traffic through a bridge.
* fpga_bridge_register
* fpga_bridge_unregister
Register/unregister a device-specific low level FPGA
Bridge driver.
Get an exclusive reference to a bridge and add it to a list:
* fpga_bridge_get_to_list
To enable/disable/put a set of bridges that are on a list:
* fpga_bridges_enable
* fpga_bridges_disable
* fpga_bridges_put
Signed-off-by: Alan Tull <atull@opensource.altera.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch adds a minor change in the FPGA Manager API
to hold information that is specific to an FPGA image
file. This change is expected to bring little, if any,
pain. The socfpga and zynq drivers are fixed up in
this patch.
An FPGA image file will have particulars that affect how the
image is programmed to the FPGA. One example is that
current 'flags' currently has one bit which shows whether the
FPGA image was built for full reconfiguration or partial
reconfiguration. Another example is timeout values for
enabling or disabling the bridges in the FPGA. As the
complexity of the FPGA design increases, the bridges in the
FPGA may take longer times to enable or disable.
This patch adds a new 'struct fpga_image_info', moves the
current 'u32 flags' to it. Two other image-specific u32's
are added for the bridge enable/disable timeouts. The FPGA
Manager API functions are changed, replacing the 'u32 flag'
parameter with a pointer to struct fpga_image_info.
Subsequent patches fix the existing low level FPGA manager
drivers.
Signed-off-by: Alan Tull <atull@opensource.altera.com>
Acked-by: Moritz Fischer <moritz.fischer@ettus.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The intent is to provide a non-DT method of getting
ahold of a FPGA manager to do some FPGA programming.
This patch refactors of_fpga_mgr_get() to reuse most of it
while adding a new method fpga_mgr_get() for getting a
pointer to a fpga manager struct, given the device.
Signed-off-by: Alan Tull <atull@opensource.altera.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch add of overlay notifications.
When DT overlays are being added, some drivers/subsystems
need to see device tree overlays before the changes go into
the live tree.
This is distinct from reconfig notifiers that are
post-apply or post-remove and which issue very granular
notifications without providing access to the context
of a whole overlay.
The following 4 notificatons are issued:
OF_OVERLAY_PRE_APPLY
OF_OVERLAY_POST_APPLY
OF_OVERLAY_PRE_REMOVE
OF_OVERLAY_POST_REMOVE
In the case of pre-apply notification, if the notifier
returns error, the overlay will be rejected.
This patch exports two functions for registering/unregistering
notifications:
of_overlay_notifier_register(struct notifier_block *nb)
of_overlay_notifier_unregister(struct notifier_block *nb)
The of_mutex is held during these notifications. The
notification data includes pointers to the overlay target
and the overlay:
struct of_overlay_notify_data {
struct device_node *overlay;
struct device_node *target;
};
Signed-off-by: Alan Tull <atull@opensource.altera.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Moritz Fischer <moritz.fischer@ettus.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Non-static (i.e. comment) extension was not counted into the memory
size. A new internal counter is introduced for this. In the case of
the hash types the sizes of the arrays are counted there as well so
that we can avoid to scan the whole set when just the header data
is requested.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
|
|
It is better to list the set elements for all set types, thus the
header information is uniform. Element counts are therefore added
to the bitmap and list types.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
|
|
Cleanup: group ip_set_put_extensions and ip_set_get_extensions
together and add missing extern.
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
|
|
Cleanup to separate all extensions into individual files.
Ported from a patch proposed by Sergey Popovich <popovich_sergei@mail.ua>.
Suggested-by: Sergey Popovich <popovich_sergei@mail.ua>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
|
|
Allocate memory with kmalloc() rather than kzalloc(): the string
is immediately initialized so it is unnecessary to zero out
the allocated memory area.
Ported from a patch proposed by Sergey Popovich <popovich_sergei@mail.ua>.
Suggested-by: Sergey Popovich <popovich_sergei@mail.ua>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
|
|
Use struct ip_set_skbinfo in struct ip_set_ext instead of open
coded fields and assign structure members in get/init helpers
instead of copying members one by one. Explicitly note that
struct ip_set_skbinfo must be padded to prevent non-aligned
access in the extension blob.
Ported from a patch proposed by Sergey Popovich <popovich_sergei@mail.ua>.
Suggested-by: Sergey Popovich <popovich_sergei@mail.ua>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
|
|
Group counter helper functions together.
Ported from a patch proposed by Sergey Popovich <popovich_sergei@mail.ua>.
Suggested-by: Sergey Popovich <popovich_sergei@mail.ua>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
|
|
Mark some of the helpers arguments as const.
Ported from a patch proposed by Sergey Popovich <popovich_sergei@mail.ua>.
Suggested-by: Sergey Popovich <popovich_sergei@mail.ua>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
|
|
Remove unnecessary whitespaces.
Ported from a patch proposed by Sergey Popovich <popovich_sergei@mail.ua>.
Suggested-by: Sergey Popovich <popovich_sergei@mail.ua>
Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
|
|
Provide a dummy implementation of soc_device_match(), to allow compiling
drivers that may be used on SoCs both with and without CONFIG_SOC_BUS,
and for compile testing.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
We keep running into cases where device drivers want to know the exact
version of the a SoC they are currently running on. In the past, this has
usually been done through a vendor specific API that can be called by a
driver, or by directly accessing some kind of version register that is
not part of the device itself but that belongs to a global register area
of the chip.
Common reasons for doing this include:
- A machine is not using devicetree or similar for passing data about
on-chip devices, but just announces their presence using boot-time
platform devices, and the machine code itself does not care about the
revision.
- There is existing firmware or boot loaders with existing DT binaries
with generic compatible strings that do not identify the particular
revision of each device, but the driver knows which SoC revisions
include which part.
- A prerelease version of a chip has some quirks and we are using the same
version of the bootloader and the DT blob on both the prerelease and the
final version. An update of the DT binding seems inappropriate because
that would involve maintaining multiple copies of the dts and/or
bootloader.
This patch introduces the soc_device_match() interface that is meant to
work like of_match_node() but instead of identifying the version of a
device, it identifies the SoC itself using a vendor-agnostic interface.
Unlike of_match_node(), we do not do an exact string compare but instead
use glob_match() to allow wildcards in strings.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A subdevice is an abstract entity that can be used to tie actions to the
booting and shutting down of a remote processor. The subdevice object is
expected to be embedded in concrete implementations, allowing for a
variety of use cases to be implemented.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
|
|
The internal PTP Hardware Clock (PHC) interface limits the resolution for
frequency adjustments to one part per billion. However, some hardware
devices allow finer adjustment, and making use of the increased resolution
improves synchronization measurably on such devices.
This patch adds an alternative method that allows finer frequency tuning
by passing the scaled ppm value to PHC drivers. This value comes from
user space, and it has a resolution of about 0.015 ppb. We also deprecate
the older method, anticipating its removal once existing drivers have been
converted over.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Suggested-by: Ulrik De Bie <ulrik.debie-os@e2big.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There are no more users except from net/core/dev.c
napi_hash_add() can now be static.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tc_act macro addressed a non existing field, and was not used in the
kernel source.
Signed-off-by: Yotam Gigi <yotamg@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch prepares for insertion of SRH through setsockopt().
The new source address argument is used when an HMAC field is
present in the SRH, which must be filled. The HMAC signature
process requires the source address as input text.
Signed-off-by: David Lebrun <david.lebrun@uclouvain.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds the necessary functions to compute and check the HMAC signature
of an SR-enabled packet. Two HMAC algorithms are supported: hmac(sha1) and
hmac(sha256).
In order to avoid dynamic memory allocation for each HMAC computation,
a per-cpu ring buffer is allocated for this purpose.
A new per-interface sysctl called seg6_require_hmac is added, allowing a
user-defined policy for processing HMAC-signed SR-enabled packets.
A value of -1 means that the HMAC field will always be ignored.
A value of 0 means that if an HMAC field is present, its validity will
be enforced (the packet is dropped is the signature is incorrect).
Finally, a value of 1 means that any SR-enabled packet that does not
contain an HMAC signature or whose signature is incorrect will be dropped.
Signed-off-by: David Lebrun <david.lebrun@uclouvain.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch creates a new type of interfaceless lightweight tunnel (SEG6),
enabling the encapsulation and injection of SRH within locally emitted
packets and forwarded packets.
>From a configuration viewpoint, a seg6 tunnel would be configured as follows:
ip -6 ro ad fc00::1/128 encap seg6 mode encap segs fc42::1,fc42::2,fc42::3 dev eth0
Any packet whose destination address is fc00::1 would thus be encapsulated
within an outer IPv6 header containing the SRH with three segments, and would
actually be routed to the first segment of the list. If `mode inline' was
specified instead of `mode encap', then the SRH would be directly inserted
after the IPv6 header without outer encapsulation.
The inline mode is only available if CONFIG_IPV6_SEG6_INLINE is enabled. This
feature was made configurable because direct header insertion may break
several mechanisms such as PMTUD or IPSec AH.
Signed-off-by: David Lebrun <david.lebrun@uclouvain.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch adds the necessary hooks and structures to provide support
for SR-IPv6 control plane, essentially the Generic Netlink commands
that will be used for userspace control over the Segment Routing
kernel structures.
The genetlink commands provide control over two different structures:
tunnel source and HMAC data. The tunnel source is the source address
that will be used by default when encapsulating packets into an
outer IPv6 header + SRH. If the tunnel source is set to :: then an
address of the outgoing interface will be selected as the source.
The HMAC commands currently just return ENOTSUPP and will be implemented
in a future patch.
Signed-off-by: David Lebrun <david.lebrun@uclouvain.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Implement minimal support for processing of SR-enabled packets
as described in
https://tools.ietf.org/html/draft-ietf-6man-segment-routing-header-02.
This patch implements the following operations:
- Intermediate segment endpoint: incrementation of active segment and rerouting.
- Egress for SR-encapsulated packets: decapsulation of outer IPv6 header + SRH
and routing of inner packet.
- Cleanup flag support for SR-inlined packets: removal of SRH if we are the
penultimate segment endpoint.
A per-interface sysctl seg6_enabled is provided, to accept/deny SR-enabled
packets. Default is deny.
This patch does not provide support for HMAC-signed packets.
Signed-off-by: David Lebrun <david.lebrun@uclouvain.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains a larger than usual batch of Netfilter
fixes for your net tree. This series contains a mixture of old bugs and
recently introduced bugs, they are:
1) Fix a crash when using nft_dynset with nft_set_rbtree, which doesn't
support the set element updates from the packet path. From Liping
Zhang.
2) Fix leak when nft_expr_clone() fails, from Liping Zhang.
3) Fix a race when inserting new elements to the set hash from the
packet path, also from Liping.
4) Handle segmented TCP SIP packets properly, basically avoid that the
INVITE in the allow header create bogus expectations by performing
stricter SIP message parsing, from Ulrich Weber.
5) nft_parse_u32_check() should return signed integer for errors, from
John Linville.
6) Fix wrong allocation instead of connlabels, allocate 16 instead of
32 bytes, from Florian Westphal.
7) Fix compilation breakage when building the ip_vs_sync code with
CONFIG_OPTIMIZE_INLINING on x86, from Arnd Bergmann.
8) Destroy the new set if the transaction object cannot be allocated,
also from Liping Zhang.
9) Use device to route duplicated packets via nft_dup only when set by
the user, otherwise packets may not follow the right route, again
from Liping.
10) Fix wrong maximum genetlink attribute definition in IPVS, from
WANG Cong.
11) Ignore untracked conntrack objects from xt_connmark, from Florian
Westphal.
12) Allow to use conntrack helpers that are registered NFPROTO_UNSPEC
via CT target, otherwise we cannot use the h.245 helper, from
Florian.
13) Revisit garbage collection heuristic in the new workqueue-based
timer approach for conntrack to evict objects earlier, again from
Florian.
14) Fix crash in nf_tables when inserting an element into a verdict map,
from Liping Zhang.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The attributes L2TP_ATTR_UDP_ZERO_CSUM6_RX and
L2TP_ATTR_UDP_ZERO_CSUM6_TX are used as flags,
but is defined as a u8 in a comment.
This patch redocuments them as flags.
Adding nla_policy entries would break API, so not doing that.
CC: Tom Herbert <therbert@google.com>
Signed-off-by: Asbjoern Sloth Toennesen <asbjorn@asbjorn.st>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We have a couple of drivers, acpi_apd.c and acpi_lpss.c,
that need to pass extra build-in properties to the devices
they create. Previously the drivers added those properties
to the struct device which is member of the struct
acpi_device, but that does not work. Those properties need
to be assigned to the struct device of the platform device
instead in order for them to become available to the
drivers.
To fix this, this patch changes acpi_create_platform_device
function to take struct property_entry pointer as parameter.
Fixes: 20a875e2e86e (serial: 8250_dw: Add quirk for APM X-Gene SoC)
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Yazen Ghannam <yazen.ghannam@amd.com>
Tested-by: Jérôme de Bretagne <jerome.debretagne@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
modify registration and deregistration of layer-4 protocol trackers to
facilitate inclusion of new elements into the current list of builtin
protocols. Both builtin (TCP, UDP, ICMP) and non-builtin (DCCP, GRE, SCTP,
UDPlite) layer-4 protocol trackers usually register/deregister themselves
using consecutive calls to nf_ct_l4proto_{,pernet}_{,un}register(...).
This sequence is interrupted and rolled back in case of error; in order to
simplify addition of builtin protocols, the input of the above functions
has been modified to allow registering/unregistering multiple protocols.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Install the callbacks via the state machine and let the core invoke
the callbacks on the already online CPUs. No functional change
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20161103145021.28528-14-bigeasy@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Install the callbacks via the state machine. Use multi state support to avoid
custom list handling for the multiple instances.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: netdev@vger.kernel.org
Cc: rt@linutronix.de
Cc: "David S. Miller" <davem@davemloft.net>
Link: http://lkml.kernel.org/r/20161103145021.28528-10-bigeasy@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Install the callbacks via the state machine.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: netdev@vger.kernel.org
Cc: "David S. Miller" <davem@davemloft.net>
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20161103145021.28528-9-bigeasy@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Install the callbacks via the state machine.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20161103145021.28528-7-bigeasy@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Install the callbacks via the state machine.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20161103145021.28528-6-bigeasy@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Install the callbacks via the state machine and let the core invoke
the callbacks on the already online CPUs.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: rt@linutronix.de
Link: http://lkml.kernel.org/r/20161103145021.28528-5-bigeasy@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Install the callbacks via the state machine.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: linux-mm@kvack.org
Cc: rt@linutronix.de
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: cgroups@vger.kernel.org
Link: http://lkml.kernel.org/r/20161103145021.28528-4-bigeasy@linutronix.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
