| Age | Commit message (Collapse) | Author |
|---|
|
Currently, we use length of DSACKed range to compute number of
delivered packets. And if sequence range in DSACK is corrupted,
we can get bogus dsacked/acked count, and bogus cwnd.
This patch put bounds on DSACKed range to skip update of data
delivery and spurious retransmission information, if the DSACK
is unlikely caused by sender's action:
- DSACKed range shouldn't be greater than maximum advertised rwnd.
- Total no. of DSACKed segments shouldn't be greater than total
no. of retransmitted segs. Unlike spurious retransmits, network
duplicates or corrupted DSACKs shouldn't be counted as delivery.
Signed-off-by: Priyaranjan Jha <priyarjha@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
INIT_IPS and GATE_ENABLE fields have a wrong offset in SG_CONFIG_REG_3.
This register is used by stream gate control of PSFP, and it has not
been used before, because PSFP is not implemented in ocelot driver.
Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch added a new helper sk_stop_timer_sync, it deactivates a timer
like sk_stop_timer, but waits for the handler to finish.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Documentation/networking/ip-sysctl.txt:46 says:
ip_forward_use_pmtu - BOOLEAN
By default we don't trust protocol path MTUs while forwarding
because they could be easily forged and can lead to unwanted
fragmentation by the router.
You only need to enable this if you have user-space software
which tries to discover path mtus by itself and depends on the
kernel honoring this information. This is normally not the case.
Default: 0 (disabled)
Possible values:
0 - disabled
1 - enabled
Which makes it pretty clear that setting it to 1 is a potential
security/safety/DoS issue, and yet it is entirely reasonable to want
forwarded traffic to honour explicitly administrator configured
route mtus (instead of defaulting to device mtu).
Indeed, I can't think of a single reason why you wouldn't want to.
Since you configured a route mtu you probably know better...
It is pretty common to have a higher device mtu to allow receiving
large (jumbo) frames, while having some routes via that interface
(potentially including the default route to the internet) specify
a lower mtu.
Note that ipv6 forwarding uses device mtu unless the route is locked
(in which case it will use the route mtu).
This approach is not usable for IPv4 where an 'mtu lock' on a route
also has the side effect of disabling TCP path mtu discovery via
disabling the IPv4 DF (don't frag) bit on all outgoing frames.
I'm not aware of a way to lock a route from an IPv6 RA, so that also
potentially seems wrong.
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: Sunmeet Gill (Sunny) <sgill@quicinc.com>
Cc: Vinay Paradkar <vparadka@qti.qualcomm.com>
Cc: Tyler Wear <twear@quicinc.com>
Cc: David Ahern <dsahern@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a helper function which finds the mdio_device structure given a
device tree node. This is helpful for finding the PCS device based on a
DTS node but managing it as a mdio_device instead of a phy_device.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, ocelot switchdev passes the skb directly to the function that
enqueues it to the list of skb's awaiting a TX timestamp. Whereas the
felix DSA driver first clones the skb, then passes the clone to this
queue.
This matters because in the case of felix, the common IRQ handler, which
is ocelot_get_txtstamp(), currently clones the clone, and frees the
original clone. This is useless and can be simplified by using
skb_complete_tx_timestamp() instead of skb_tstamp_tx().
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
All TC actions call tcf_idr_insert() for new action at the end
of their ->init(), so we can actually move it to a central place
in tcf_action_init_1().
And once the action is inserted into the global IDR, other parallel
process could free it immediately as its refcnt is still 1, so we can
not fail after this, we need to move it after the goto action
validation to avoid handling the failure case after insertion.
This is found during code review, is not directly triggered by syzbot.
And this prepares for the next patch.
Cc: Vlad Buslov <vladbu@mellanox.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For now, asynchronous raid6 recovery calculate functions are require
common offset for pages. But, we expect them to support different page
offset after introducing stripe shared page. Do that by simplily adding
page offset where each page address are referred. Then, replace the
old interface with the new ones in raid6 and raid6test.
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
|
|
For now, syndrome compute functions require common offset in the pages
array. However, we expect them to support different offset when try to
use shared page in the following. Simplily covert them by adding page
offset where each page address are referred.
Since the only caller of async_gen_syndrome() and async_syndrome_val()
are in raid6, we don't want to reserve the old interface but modify the
interface directly. After that, replacing old interfaces with new ones
for raid6 and raid6test.
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
|
|
raid5 will call async_xor() and async_xor_val() to compute xor.
For now, both of them require the common src/dst page offset. But,
we want them to support different src/dst page offset for following
shared page.
Here, adding two new function async_xor_offs() and async_xor_val_offs()
respectively for async_xor() and async_xor_val().
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
|
|
do_init_timer() accepts any combination of timer flags handed in by the
caller without a sanity check, but only TIMER_DEFFERABLE, TIMER_PINNED and
TIMER_IRQSAFE are valid.
If the supplied flags have other bits set, this could result in
malfunction. If bits are set in TIMER_CPUMASK the first timer usage could
deference a cpu base which is outside the range of possible CPUs. If
TIMER_MIGRATION is set, then the switch_timer_base() will live lock.
Prevent that with a sanity check which warns when invalid flags are
supplied and masks them out.
[ tglx: Made it WARN_ON_ONCE() and added context to the changelog ]
Signed-off-by: Qianli Zhao <zhaoqianli@xiaomi.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/9d79a8aa4eb56713af7379f99f062dedabcde140.1597326756.git.zhaoqianli@xiaomi.com
|
|
The debugobject core could be slightly harder to corrupt if the
debug_obj_descr would be a pointer to const memory.
Depending on the architecture, const data structures are placed into
read-only memory and thus are harder to corrupt or hijack.
This descriptor is used to fix up stuff like timers and workqueues when
core kernel data structures are busted, so moving the descriptors to
read-only memory will make debugobjects more resilient to something going
wrong and then corrupting the function pointers inside struct
debug_obj_descr.
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200815004027.2046113-2-swboyd@chromium.org
|
|
* for-5.10/block: (140 commits)
bdi: replace BDI_CAP_NO_{WRITEBACK,ACCT_DIRTY} with a single flag
bdi: invert BDI_CAP_NO_ACCT_WB
bdi: replace BDI_CAP_STABLE_WRITES with a queue and a sb flag
mm: use SWP_SYNCHRONOUS_IO more intelligently
bdi: remove BDI_CAP_SYNCHRONOUS_IO
bdi: remove BDI_CAP_CGROUP_WRITEBACK
block: lift setting the readahead size into the block layer
md: update the optimal I/O size on reshape
bdi: initialize ->ra_pages and ->io_pages in bdi_init
aoe: set an optimal I/O size
bcache: inherit the optimal I/O size
drbd: remove dead code in device_to_statistics
fs: remove the unused SB_I_MULTIROOT flag
block: mark blkdev_get static
PM: mm: cleanup swsusp_swap_check
mm: split swap_type_of
PM: rewrite is_hibernate_resume_dev to not require an inode
mm: cleanup claim_swapfile
ocfs2: cleanup o2hb_region_dev_store
dasd: cleanup dasd_scan_partitions
...
|
|
Replace the two negative flags that are always used together with a
single positive flag that indicates the writeback capability instead
of two related non-capabilities. Also remove the pointless wrappers
to just check the flag.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Replace BDI_CAP_NO_ACCT_WB with a positive BDI_CAP_WRITEBACK_ACCT to
make the checks more obvious. Also remove the pointless
bdi_cap_account_writeback wrapper that just obsfucates the check.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The BDI_CAP_STABLE_WRITES is one of the few bits of information in the
backing_dev_info shared between the block drivers and the writeback code.
To help untangling the dependency replace it with a queue flag and a
superblock flag derived from it. This also helps with the case of e.g.
a file system requiring stable writes due to its own checksumming, but
not forcing it on other users of the block device like the swap code.
One downside is that we an't support the stable_pages_required bdi
attribute in sysfs anymore. It is replaced with a queue attribute which
also is writable for easier testing.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
BDI_CAP_SYNCHRONOUS_IO is only checked in the swap code, and used to
decided if ->rw_page can be used on a block device. Just check up for
the method instead. The only complication is that zram needs a second
set of block_device_operations as it can switch between modes that
actually support ->rw_page and those who don't.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Just checking SB_I_CGROUPWB for cgroup writeback support is enough.
Either the file system allocates its own bdi (e.g. btrfs), in which case
it is known to support cgroup writeback, or the bdi comes from the block
layer, which always supports cgroup writeback.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Drivers shouldn't really mess with the readahead size, as that is a VM
concept. Instead set it based on the optimal I/O size by lifting the
algorithm from the md driver when registering the disk. Also set
bdi->io_pages there as well by applying the same scheme based on
max_sectors. To ensure the limits work well for stacking drivers a
new helper is added to update the readahead limits from the block
limits, which is also called from disk_stack_limits.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The last user of SB_I_MULTIROOT is disappeared with commit f2aedb713c28
("NFS: Add fs_context support.")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The new version of RoCEE supports using CQE in size of 32B or 64B. The
performance of bus can be improved by using larger size of CQE.
Link: https://lore.kernel.org/r/1600245806-56321-3-git-send-email-liweihang@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Weihang Li <liweihang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- fix a regression at the CEC adapter core
- two uAPI patches (one revert) for changes in this development cycle
* tag 'media/v5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: dt-bindings: media: imx274: Convert to json-schema
media: media/v4l2: remove V4L2_FLAG_MEMORY_NON_CONSISTENT flag
media: cec-adap.c: don't use flush_scheduled_work()
|
|
There was a request to preprocess the module linker script like we
do for the vmlinux one. (https://lkml.org/lkml/2020/8/21/512)
The difference between vmlinux.lds and module.lds is that the latter
is needed for external module builds, thus must be cleaned up by
'make mrproper' instead of 'make clean'. Also, it must be created
by 'make modules_prepare'.
You cannot put it in arch/$(SRCARCH)/kernel/, which is cleaned up by
'make clean'. I moved arch/$(SRCARCH)/kernel/module.lds to
arch/$(SRCARCH)/include/asm/module.lds.h, which is included from
scripts/module.lds.S.
scripts/module.lds is fine because 'make clean' keeps all the
build artifacts under scripts/.
You can add arch-specific sections in <asm/module.lds.h>.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Jessica Yu <jeyu@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Palmer Dabbelt <palmerdabbelt@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Jessica Yu <jeyu@kernel.org>
|
|
Client uses static bitmask for GETATTR on CLOSE/WRITE/DELEGRETURN
and ignores the fact that it might have some attributes marked
invalid in its cache. Compared to v3 where all attributes are
retrieved in postop attributes, v4's cache is frequently out of
sync and leads to standalone GETATTRs being sent to the server.
Instead, in addition to the minimum cache consistency attributes
also check cache_validity and adjust the GETATTR request accordingly.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
https://git.linaro.org/people/georgi.djakov/linux into char-misc-next
Georgi writes:
interconnect changes for 5.10
Here are the interconnect changes for the 5.10-rc1 merge window
consisting of core changes, new drivers and cleanups.
Core changes:
- New bulk API helpers for managing multiple interconnect paths.
- New xlate_extended() interface for parsing additional data from DT.
- Support for sync_state().
Driver changes:
- New drivers for SM8150 and SM8250 platforms.
- New drivers for the Qualcomm OSM and EPSS hardware blocks.
- Per-BCM scaling factor support.
- Misc cleanups.
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
* tag 'icc-5.10-rc1' of https://git.linaro.org/people/georgi.djakov/linux: (28 commits)
interconnect: imx: simplify the return expression of imx_icc_unregister
interconnect: imx: Simplify with dev_err_probe()
interconnect: core: Simplify with dev_err_probe()
interconnect: qcom: Use icc_sync_state
interconnect: Add sync state support
interconnect: Add get_bw() callback
interconnect: qcom: osm-l3: Mark more structures const
interconnect: qcom: Add EPSS L3 support on SM8250
dt-bindings: interconnect: Add EPSS L3 DT binding on SM8250
interconnect: qcom: Lay the groundwork for adding EPSS support
interconnect: qcom: Add OSM L3 support on SM8150
dt-bindings: interconnect: Add OSM L3 DT binding on SM8150
interconnect: qcom: sc7180: Replace xlate with xlate_extended
interconnect: qcom: sdm845: Replace xlate with xlate_extended
interconnect: qcom: Implement xlate_extended() to parse tags
dt-bindings: interconnect: Document the support of optional path tag
interconnect: Introduce xlate_extended() callback
interconnect: qcom: Add support for per-BCM scaling factors
interconnect: qcom: Only wait for completion in AMC/WAKE by default
interconnect: qcom: Support bcm-voter-specific TCS wait behavior
...
|
|
AMD_FCH_GPIO_REG_GPIO55_DEVSLP0
Schematics show that the GPIO number is 55 (not 59). Trivial typo.
Signed-off-by: Ed Wildgoose <lists@wildgooses.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
As this function is no longer allowed to create new mappings
let us rename it to reflect this.
Note all nodes should already exist before any of the users
of this function are called.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
acpi_map_pxm_to_online_node()
While this function will only return an online node, it can have the side
effect of partially creating a new node. The existing comments suggest this
is intentional, but the usecases of this function are related to NFIT and
HMAT parsing, neither of which should be able to define new nodes.
One route by which the existing behaviour would cause a crash is to have a
_PXM entry in ACPI DSDT attempt to place a device within this partly
created proximity domain. A subsequent call to devm_kzalloc() or similar
would result in an attempt to allocate memory on a node for which zone
lists have not been set up and a NULL pointer dereference.
Prevent such cases by switching to pxm_to_node() within
acpi_map_pxm_to_online_node() which cannot cause a new node to be
partly created. If one would previously have been created we now
return NO_NUMA_NODE. Documentation updated to reflect this change.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Since commit 7484c727b636 ("ARM: realview: delete the RealView board
files") and commit 16956fed35fe ("ARM: versatile: switch to DT only
booting and remove legacy code"), there's no one to use the functions
defined or declared in include/clocksource/timer-sp804.h. Delete it.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200918132237.3552-3-thunder.leizhen@huawei.com
|
|
Provide compat_xfrm_userpolicy_info translation for xfrm setsocketopt().
Reallocate buffer and put the missing padding for 64-bit message.
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Provide the user-to-kernel translator under XFRM_USER_COMPAT, that
creates for 32-bit xfrm-user message a 64-bit translation.
The translation is afterwards reused by xfrm_user code just as if
userspace had sent 64-bit message.
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Provide the kernel-to-user translator under XFRM_USER_COMPAT, that
creates for 64-bit xfrm-user message a 32-bit translation and puts it
in skb's frag_list. net/compat.c layer provides MSG_CMSG_COMPAT to
decide if the message should be taken from skb or frag_list.
(used by wext-core which has also an ABI difference)
Kernel sends 64-bit xfrm messages to the userspace for:
- multicast (monitor events)
- netlink dumps
Wire up the translator to xfrm_nlmsg_multicast().
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Add a skeleton for xfrm_compat module and provide API to register it in
xfrm_state.ko. struct xfrm_translator will have function pointers to
translate messages received from 32-bit userspace or to be sent to it
from 64-bit kernel.
module_get()/module_put() are used instead of rcu_read_lock() as the
module will vmalloc() memory for translation.
The new API is registered with xfrm_state module, not with xfrm_user as
the former needs translator for user_policy set by setsockopt() and
xfrm_user already uses functions from xfrm_state.
Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Originally we used the term "encrypted name" or "ciphertext name" to
mean the encoded filename that is shown when an encrypted directory is
listed without its key. But these terms are ambiguous since they also
mean the filename stored on-disk. "Encrypted name" is especially
ambiguous since it could also be understood to mean "this filename is
encrypted on-disk", similar to "encrypted file".
So we've started calling these encoded names "no-key names" instead.
Therefore, rename DCACHE_ENCRYPTED_NAME to DCACHE_NOKEY_NAME to avoid
confusion about what this flag means.
Link: https://lore.kernel.org/r/20200924042624.98439-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Currently we're using the term "ciphertext name" ambiguously because it
can mean either the actual ciphertext filename, or the encoded filename
that is shown when an encrypted directory is listed without its key.
The latter we're now usually calling the "no-key name"; and while it's
derived from the ciphertext name, it's not the same thing.
To avoid this ambiguity, rename fscrypt_name::is_ciphertext_name to
fscrypt_name::is_nokey_name, and update comments that say "ciphertext
name" (or "encrypted name") to say "no-key name" instead when warranted.
Link: https://lore.kernel.org/r/20200924042624.98439-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into bpf-next
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add kerneldoc for the core PHY data structures, a few inline functions
and exported functions which are not already documented.
v2
Typos
g/phy/PHY/s
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add missing parameter documentation, or fixup wrong parameter names.
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When excluding S,G entries we need a way to block a particular S,G,port.
The new port group flag is managed based on the source's timer as per
RFCs 3376 and 3810. When a source expires and its port group is in
EXCLUDE mode, it will be blocked.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We need to handle group filter mode transitions and initial state.
To change a port group's INCLUDE -> EXCLUDE mode (or when we have added
a new port group in EXCLUDE mode) we need to add that port to all of
*,G ports' S,G entries for proper replication. When the EXCLUDE state is
changed from IGMPv3 report, br_multicast_fwd_filter_exclude() must be
called after the source list processing because the assumption is that
all of the group's S,G entries will be created before transitioning to
EXCLUDE mode, i.e. most importantly its blocked entries will already be
added so it will not get automatically added to them.
The transition EXCLUDE -> INCLUDE happens only when a port group timer
expires, it requires us to remove that port from all of *,G ports' S,G
entries where it was automatically added previously.
Finally when we are adding a new S,G entry we must add all of *,G's
EXCLUDE ports to it.
In order to distinguish automatically added *,G EXCLUDE ports we have a
new port group flag - MDB_PG_FLAGS_STAR_EXCL.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We need to be able to differentiate between pg entries created by
user-space and the kernel when we start generating S,G entries for
IGMPv3/MLDv2's fast path. User-space entries are created by default as
RTPROT_STATIC and the kernel entries are RTPROT_KERNEL. Later we can
allow user-space to provide the entry rt_protocol so we can
differentiate between who added the entries specifically (e.g. clag,
admin, frr etc).
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add new mdb attributes (MDBE_ATTR_SOURCE for setting,
MDBA_MDB_EATTR_SOURCE for dumping) to allow add/del and dump of mdb
entries with a source address (S,G). New S,G entries are created with
filter mode of MCAST_INCLUDE. The same attributes are used for IPv4 and
IPv6, they're validated and parsed based on their protocol.
S,G host joined entries which are added by user are not allowed yet.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since the MDB add/del code expects an exact struct br_mdb_entry we can't
really add any extensions, thus add a new nested attribute at the level of
MDBA_SET_ENTRY called MDBA_SET_ENTRY_ATTRS which will be used to pass
all new options via netlink attributes. This patch doesn't change
anything functionally since the new attribute is not used yet, only
parsed.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Since now we have src in br_ip, u no longer makes sense so rename
it to dst. No functional changes.
v2: fix build with CONFIG_BATMAN_ADV_MCAST
CC: Marek Lindner <mareklindner@neomailbox.ch>
CC: Simon Wunderlich <sw@simonwunderlich.de>
CC: Antonio Quartulli <a@unstable.cc>
CC: Sven Eckelmann <sven@narfation.org>
CC: b.a.t.m.a.n@lists.open-mesh.org
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a new src field to struct br_ip which will be used to lookup S, G
entries. When SSM option is added we will enable full br_ip lookups.
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-09-23
The following pull-request contains BPF updates for your *net-next* tree.
We've added 95 non-merge commits during the last 22 day(s) which contain
a total of 124 files changed, 4211 insertions(+), 2040 deletions(-).
The main changes are:
1) Full multi function support in libbpf, from Andrii.
2) Refactoring of function argument checks, from Lorenz.
3) Make bpf_tail_call compatible with functions (subprograms), from Maciej.
4) Program metadata support, from YiFei.
5) bpf iterator optimizations, from Yonghong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current SOF machine driver adds a name prefix for each codec,
mainly to differentiate ALSA controls for left and right amplifiers.
This is a good idea, but the machine driver duplicates some of the
information that already exists in ACPI descriptors, so add those
prefixes there. Follow-up patches will make use of the information
encoded in these tables and remove duplication.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200923080514.3242858-4-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There are no users outside the core block code left now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
swap_type_of is used for two entirely different purposes:
(1) check what swap type a given device/offset corresponds to
(2) find the first available swap device that can be written to
Mixing both in a single function creates an unreadable mess. Create two
separate functions instead, and switch both to pass a dev_t instead of
a struct block_device to further simplify the code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Just check the dev_t to help simplifying the code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
