| Age | Commit message (Collapse) | Author |
|---|
|
Add clock bindings constants for action S700
Maintain common clock dt-bindings for Actions Semi SoC's
S700 and S900.
Signed-off-by: Parthiban Nallathambi <pn@denx.de>
Signed-off-by: Saravanan Sekar <sravanhome@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/samsung into devel
Samsung pinctrl drivers changes for v4.19
1. Add handling of external wakeup interrupts mask inside the pin
controller driver.
Existing solution is spread between the driver and machine code. The
machine code writes the mask but its value is taken from pin
controller driver.
This moves everything into pin controller driver allowing later to
remove the cross-subsystem interaction. Also this is a necessary
step for implementing later Suspend to RAM on ARMv8 Exynos5433.
2. Bring necessary suspend/resume callbacks for Exynos542x and
Exynos5260.
3. Document hidden requirement about one external wakeup interrupts
device node.
4. Minor documentation cleanups.
|
|
Add a helper for checking whether polling is used to detect PHY status
changes.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
We have a parallel unlocked reader and writer with ib_uverbs_get_context()
vs everything else, and nothing guarantees this works properly.
Audit and fix all of the places that access ucontext to use one of the
following locking schemes:
- Call ib_uverbs_get_ucontext() under SRCU and check for failure
- Access the ucontext through an struct ib_uobject context member
while holding a READ or WRITE lock on the uobject.
This value cannot be NULL and has no race.
- Hold the ucontext_lock and check for ufile->ucontext !NULL
This also re-implements ib_uverbs_get_ucontext() in a way that is safe
against concurrent ib_uverbs_get_context() and disassociation.
As a side effect, every access to ucontext in the commands is via
ib_uverbs_get_context() with an error check, or via the uobject, so there
is no longer any need for the core code to check ucontext on every command
call. These checks are also removed.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Allocating the struct file during alloc_begin creates this strange
asymmetry with IDR, where the FD has two krefs pointing at it during the
pre-commit phase. In particular this makes the abort process for FD very
strange and confusing.
For instance abort currently calls the type's destroy_object twice, and
the fops release once if abort is done. This is very counter intuitive. No
fops should be called until alloc_commit succeeds, and destroy_object
should only ever be called once.
Moving the struct file allocation to the alloc_commit is now simple, as we
already support failure of rdma_alloc_commit_uobject, with all the
required rollback pieces.
This creates an understandable symmetry with IDR and simplifies/fixes the
abort handling for FD types.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The ioctl framework already does this correctly, but the write path did
not. This is trivially fixed by simply using a standard pattern to return
uobj_alloc_commit() as the last statement in every function.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The locking here has always been a bit crazy and spread out, upon some
careful analysis we can simplify things.
Create a single function uverbs_destroy_ufile_hw() that internally handles
all locking. This pulls together pieces of this process that were
sprinkled all over the places into one place, and covers them with one
lock.
This eliminates several duplicate/confusing locks and makes the control
flow in ib_uverbs_close() and ib_uverbs_free_hw_resources() extremely
simple.
Unfortunately we have to keep an extra mutex, ucontext_lock. This lock is
logically part of the rwsem and provides the 'down write, fail if write
locked, wait if read locked' semantic we require.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Our ABI for write() uses a s32 for FDs and a u32 for IDRs, but internally
we ended up implicitly casting these ABI values into an 'int'. For ioctl()
we use a s64 for FDs and a u64 for IDRs, again casting to an int.
The various casts to int are all missing range checks which can cause
userspace values that should be considered invalid to be accepted.
Fix this by making the generic lookup routine accept a s64, which does not
truncate the write API's u32/s32 or the ioctl API's s64. Then push the
detailed range checking down to the actual type implementations to be
shared by both interfaces.
Finally, change the copy of the uobj->id to sign extend into a s64, so eg,
if we ever wish to return a negative value for a FD it is carried
properly.
This ensures that userspace values are never weirdly interpreted due to
the various trunctations and everything that is really out of range gets
an EINVAL.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
The scheduler of the entity is decided by the run queue on which
it is queued. This patch avoids us the effort required to maintain
a sync between rq and sched field when we start shifting entites
among different rqs.
Signed-off-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
entity has a scheduler field and we don't need the sched argument
in any of the functions where entity is provided.
Signed-off-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Pull NVMe updates from Christoph:
"Highlights:
- massively improved tracepoints (Keith Busch)
- support for larger inline data in the RDMA host and target
(Steve Wise)
- RDMA setup/teardown path fixes and refactor (Sagi Grimberg)
- Command Supported and Effects log support for the NVMe target
(Chaitanya Kulkarni)
- buffered I/O support for the NVMe target (Chaitanya Kulkarni)
plus the usual set of cleanups and small enhancements."
* 'nvme-4.19' of git://git.infradead.org/nvme:
nvmet: don't use uuid_le type
nvmet: check fileio lba range access boundaries
nvmet: fix file discard return status
nvme-rdma: centralize admin/io queue teardown sequence
nvme-rdma: centralize controller setup sequence
nvme-rdma: unquiesce queues when deleting the controller
nvme-rdma: mark expected switch fall-through
nvme: add disk name to trace events
nvme: add controller name to trace events
nvme: use hw qid in trace events
nvme: cache struct nvme_ctrl reference to struct nvme_request
nvmet-rdma: add an error flow for post_recv failures
nvmet-rdma: add unlikely check in the fast path
nvmet-rdma: support max(16KB, PAGE_SIZE) inline data
nvme-rdma: support up to 4 segments of inline data
nvmet: add buffered I/O support for file backed ns
nvmet: add commands supported and effects log page
nvme: move init of keep_alive work item to controller initialization
nvme.h: resync with nvme-cli
|
|
Maintain the tracing on/off setting of the ring_buffer when switching
to the trace buffer snapshot.
Taking a snapshot is done by swapping the backup ring buffer
(max_tr_buffer). But since the tracing on/off setting is defined
by the ring buffer, when swapping it, the tracing on/off setting
can also be changed. This causes a strange result like below:
/sys/kernel/debug/tracing # cat tracing_on
1
/sys/kernel/debug/tracing # echo 0 > tracing_on
/sys/kernel/debug/tracing # cat tracing_on
0
/sys/kernel/debug/tracing # echo 1 > snapshot
/sys/kernel/debug/tracing # cat tracing_on
1
/sys/kernel/debug/tracing # echo 1 > snapshot
/sys/kernel/debug/tracing # cat tracing_on
0
We don't touch tracing_on, but snapshot changes tracing_on
setting each time. This is an anomaly, because user doesn't know
that each "ring_buffer" stores its own tracing-enable state and
the snapshot is done by swapping ring buffers.
Link: http://lkml.kernel.org/r/153149929558.11274.11730609978254724394.stgit@devbox
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: Hiraku Toyooka <hiraku.toyooka@cybertrust.co.jp>
Cc: stable@vger.kernel.org
Fixes: debdd57f5145 ("tracing: Make a snapshot feature available from userspace")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
[ Updated commit log and comment in the code ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
This patch changes udlfb so that it may reallocate the framebuffer when
setting higher-resolution mode. If we boot the system without monitor
attached, udlfb creates a framebuffer with the size 800x600. This patch
makes it possible to select higher videomode with the fbset command when
a monitor is attached.
Note that there is no reliable way to prevent the system from touching the
old framebuffer, so we must not free it. We add it to the list
dlfb->deferred_free and free it when the driver is unloaded.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
[b.zolnierkie: sparse fixes]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
|
|
The default delay 5 jiffies is too much when the kernel is compiled with
HZ=100 - it results in jumpy cursor in Xwindow.
In order to find out the optimal delay, I benchmarked the driver on
1280x720x30fps video. I found out that with HZ=1000, 10ms is acceptable,
but with HZ=250 or HZ=300, we need 4ms, so that the video is played
without any frame skips.
This patch changes the delay to this value.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
|
|
The defio subsystem overwrites the method fb_osp->mmap. That method is
stored in module's static data - and that means that if we have multiple
diplaylink adapters, they will over write each other's method.
In order to avoid interference between multiple adapters, we copy the
fb_ops structure to a device-local memory.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
|
|
The udlfb driver reprograms the hardware everytime the user switches the
console, that makes quite unusable when working on the console.
This patch makes the driver remember the videomode we are in and avoid
reprogramming the hardware if we switch to the same videomode.
We mask the "activate" field and the "FB_VMODE_SMOOTH_XPAN" flag when
comparing the videomode, because they cause spurious switches when
switching to and from the Xserver.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
|
|
I observed that the performance of the udl fb driver degrades over time.
On a freshly booted machine, it takes 6 seconds to do "ls -la /usr/bin";
after some time of use, the same operation takes 14 seconds.
The reason is that the value of "limit_sem" decays over time.
The udl driver uses a semaphore "limit_set" to specify how many free urbs
are there on dlfb->urbs.list. If the count is zero, the "down" operation
will sleep until some urbs are added to the freelist.
In order to avoid some hypothetical deadlock, the driver will not call
"up" immediately, but it will offload it to a workqueue. The problem is
that if we call "schedule_delayed_work" on the same work item multiple
times, the work item may only be executed once.
This is happening:
* some urb completes
* dlfb_urb_completion adds it to the free list
* dlfb_urb_completion calls schedule_delayed_work to schedule the function
dlfb_release_urb_work to increase the semaphore count
* as the urb is on the free list, some other task grabs it and submits it
* the submitted urb completes, dlfb_urb_completion is called again
* dlfb_urb_completion calls schedule_delayed_work, but the work is already
scheduled, so it does nothing
* finally, dlfb_release_urb_work is called, it increases the semaphore
count by 1, although it should increase it by 2
So, the semaphore count is decreasing over time, and this causes gradual
performance degradation.
Note that in the current kernel, the "up" function may be called from
interrupt and it may race with the "down" function called by another
thread, so we don't have to offload the call of "up" to a workqueue at
all. This patch removes the workqueue code. The patch also changes
"down_interruptible" to "down" in dlfb_free_urb_list, so that we will
clean up the driver properly even if a signal arrives.
With this patch, the performance of udlfb no longer degrades.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
[b.zolnierkie: fix immediatelly -> immediately typo]
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
|
|
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
This can be used to mark the last queued source buffer as the last
buffer.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Add a new pixelformat for the vicodec software codec using the
Fast Walsh Hadamard Transform.
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Add MEDIA_ENT_F_PROC_VIDEO_EN/DECODER to be used for the encoder
and decoder entities of codec hardware.
[mchehab+samsung@kernel.org: split description on two senteces by adding dots]
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
After enabling DSC we need to send compression mode command packet
and pps data packet, for which 2 new data types are added
07h Compression Mode Data Type Write , short write, 2 parameters
0Ah PPS Long Write (word count determines number of bytes)
This patch adds support to send these packets.
Cc: David Airlie <airlied@linux.ie>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-fbdev@vger.kernel.org
Changes in v3:
- None
Signed-off-by: vkorjani <vikas.korjani@intel.com>
[seanpaul removed pps_write_buffer fn, added types to packet_format helpers]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
|
|
Keep the function defines in numerical order: 0x6000 comes after
0x2000, so move it back.
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Add a new function for digital video encoders such as HDMI transmitters.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
The use of 'DTV' is very confusing since it normally refers to Digital
TV e.g. DVB etc.
Instead use 'DV' (Digital Video), which nicely corresponds to the
DV Timings API used to configure such receivers and transmitters.
We keep an alias to avoid breaking userspace applications.
Since this alias is only available if __KERNEL__ is *not* defined
(i.e. it is only available for userspace, not kernelspace), any
drivers that use it also have to be converted to the new define.
These drivers are adv7604, adv7842 and tda1997x.
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
The v2 entity structure never exposed the entity flags, which made it
impossible to detect connector or default entities.
It is really trivial to just expose this information, so implement this.
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
The v2 pad structure never exposed the pad index, which made it impossible
to call the MEDIA_IOC_SETUP_LINK ioctl, which needs that information.
It is really trivial to just expose this information, so implement this.
Signed-off-by: Hans Verkuil <hansverk@cisco.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
The reasons why dma_free_attrs() should not be called from IRQ context
are not necessarily obvious and somewhat buried in the development
history, so let's start by documenting the warning itself to help anyone
who does happen to hit it and wonder what the deal is.
However, this check turns out to be slightly over-restrictive for the
way that per-device memory has been spliced into the general API, since
for that case we know that dma_declare_coherent_memory() has created an
appropriate CPU mapping for the entire area and nothing dynamic should
be happening. Given that the usage model for per-device memory is often
more akin to streaming DMA than 'real' coherent DMA (e.g. allocating and
freeing space to copy short-lived packets in and out), it is also
somewhat more reasonable for those operations to happen in IRQ handlers
for such devices.
Therefore, let's move the irqs_disabled() check down past the per-device
area hook, so that that gets a chance to resolve the request before we
reach definite "you're doing it wrong" territory.
Reported-by: Fredrik Noring <noring@nocrew.org>
Tested-by: Fredrik Noring <noring@nocrew.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Add support for the new 5V CEC events
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Add two new events to signal when the 5V line goes high or low.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Currently architectures can override __atomic_op_*() to define the barriers
used before/after a relaxed atomic when used to build acquire/release/fence
variants.
This has the unfortunate property of requiring the architecture to define the
full wrapper for the atomics, rather than just the barriers they care about,
and gets in the way of generating atomics which can be easily read.
Instead, this patch has architectures define an optional set of barriers:
* __atomic_acquire_fence()
* __atomic_release_fence()
* __atomic_pre_full_fence()
* __atomic_post_full_fence()
... which <linux/atomic.h> uses to build the wrappers.
It would be nice if we could undef these, along with the __atomic_op_*()
wrappers, but that would break the cmpxchg() wrappers, which are written
in preprocessor. Undefs would have been nice, but alas.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Andrea Parri <parri.andrea@gmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: andy.shevchenko@gmail.com
Cc: arnd@arndb.de
Cc: aryabinin@virtuozzo.com
Cc: catalin.marinas@arm.com
Cc: dvyukov@google.com
Cc: glider@google.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: peter@hurleysoftware.com
Link: http://lkml.kernel.org/r/20180716113017.3909-7-mark.rutland@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
We currently don't instrument cmpxchg_double() and
cmpxchg_double_local() due to compilation issues reported in the past,
which are supposedly related to GCC bug 72873 [1], reported when GCC 7
was not yet released. This bug only applies to x86-64, and does not
apply to other architectures.
While the test case for GCC bug 72873 triggers issues with released
versions of GCC, the instrumented kernel code compiles fine for all
configurations I have tried, and it is unclear how the two cases
are/were related.
As we can't reproduce the kernel build failures, let's instrument
cmpxchg_double*() again. We can revisit the issue if build failures
reappear.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: andy.shevchenko@gmail.com
Cc: aryabinin@virtuozzo.com
Cc: catalin.marinas@arm.com
Cc: glider@google.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: parri.andrea@gmail.com
Cc: peter@hurleysoftware.com
Link: http://lkml.kernel.org/r/20180716113017.3909-6-mark.rutland@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
While we instrument all of the (non-relaxed) atomic_*() functions and
cmpxchg(), we missed xchg().
Let's add instrumentation for xchg(), fixing up x86 to implement
arch_xchg().
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: andy.shevchenko@gmail.com
Cc: arnd@arndb.de
Cc: aryabinin@virtuozzo.com
Cc: catalin.marinas@arm.com
Cc: glider@google.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: parri.andrea@gmail.com
Cc: peter@hurleysoftware.com
Link: http://lkml.kernel.org/r/20180716113017.3909-5-mark.rutland@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Currently we define some fairly verbose wrappers for the cmpxchg()
family so that we can pass a pointer and size into kasan_check_write().
The wrappers duplicate the size-switching logic necessary in arch code,
and only work for scalar types. On some architectures, (cmp)xchg are
used on non-scalar types, and thus the instrumented wrappers need to be
able to handle this.
We could take the type-punning logic from {READ,WRITE}_ONCE(), but this
makes the wrappers even more verbose, and requires several local
variables in the macros.
Instead, let's simplify the wrappers into simple macros which:
* snapshot the pointer into a single local variable, called __ai_ptr to
avoid conflicts with variables in the scope of the caller.
* call kasan_check_write() on __ai_ptr.
* invoke the relevant arch_*() function, passing the original arguments,
bar __ai_ptr being substituted for ptr.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: andy.shevchenko@gmail.com
Cc: arnd@arndb.de
Cc: aryabinin@virtuozzo.com
Cc: catalin.marinas@arm.com
Cc: glider@google.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: parri.andrea@gmail.com
Cc: peter@hurleysoftware.com
Link: http://lkml.kernel.org/r/20180716113017.3909-4-mark.rutland@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Vince reported the perf_fuzzer giving various unwinder warnings and
Josh reported:
> Deja vu. Most of these are related to perf PEBS, similar to the
> following issue:
>
> b8000586c90b ("perf/x86/intel: Cure bogus unwind from PEBS entries")
>
> This is basically the ORC version of that. setup_pebs_sample_data() is
> assembling a franken-pt_regs which ORC isn't happy about. RIP is
> inconsistent with some of the other registers (like RSP and RBP).
And where the previous unwinder only needed BP,SP ORC also requires
IP. But we cannot spoof IP because then the sample will get displaced,
entirely negating the point of PEBS.
So cure the whole thing differently by doing the unwind early; this
does however require a means to communicate we did the unwind early.
We (ab)use an unused sample_type bit for this, which we set on events
that fill out the data->callchain before the normal
perf_prepare_sample().
Debugged-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Tested-by: Josh Poimboeuf <jpoimboe@redhat.com>
Tested-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
'numa_entry' is a struct list_head defined in task_struct, but never used.
No functional change.
Signed-off-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Rik van Riel <riel@surriel.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1529514181-9842-2-git-send-email-srikar@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Needed for annotating rt_mutex locks.
Tested-by: John Sperbeck <jsperbeck@google.com>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Deepa Dinamani <deepadinamani@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Chang <dpf@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Wolfram Sang <wsa@the-dreams.de>
Link: http://lkml.kernel.org/r/20180720083914.1950-2-peda@axentia.se
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
Jonathan writes:
Second set of IIO new device support, features and cleanups.
There are also a couple of fixes that can wait for the coming merge
window.
Core new features
* Support for phase channels (used in time of flight sensors amongst
other things)
* Support for deep UV light channel modifier.
New Device Support
* AD4758 DAC
- New driver and dt bindings.
* adxl345
- Support the adxl375 +-200g part which is register compatible.
* isl29501 Time of flight sensor.
- New driver
* meson-saradc
- Support the Meson8m2 Socs - right now this is just an ID, but there will
be additional difference in future.
* mpu6050
- New ID for 6515 variant.
* si1133 UV sensor.
- New driver
* Spreadtrum SC27xx PMIC ADC
- New driver and dt bindings.
Features
* adxl345
- Add calibration offset readback and writing.
- Add sampling frequency control.
Fixes and Cleanups
* ad5933
- Use a macro for the channel definition to reduce duplication.
* ad9523
- Replace use of core mlock with a local lock. Part of ongoing efforts
to avoid confusing the purpose of mlock which is only about iio core
state changes.
- Fix displayed phase which was out by a factor of 10.
* adxl345
- Add a link to the datasheet.
- Rework the use of the address field in the chan_spec structures to
allow addition of more per channel information.
* adis imu
- Mark switch fall throughs.
* at91-sama5d2
- Fix some casting on big endian systems.
* bmp280
- Drop some DT elements that aren't used and should mostly be done from
userspace rather than in DT.
* hx711
- add clock-frequency dt binding and resulting delay to deal with capacitance
issue on some boards.
- fix a spurious unit-address in the example.
* ina2xx
- Avoid a possible kthread_stop with a stale task_struct.
* ltc2632
- Remove some unused local variables (assigned but value never used).
* max1363
- Use device_get_match_data to remove some boilerplate.
* mma8452
- Mark switch fall throughs.
* sca3000
- Fix a missing return in a switch statement (a bad fallthrough
previously!)
* sigma-delta-modulator
- Drop incorrect unit address from the DT example.
* st_accel
- Use device_get_match_data to drop some boiler plate.
- Move to probe_new for i2c driver as second parameter not used.
* st_sensors library
- Use a strlcpy (safe in this case).
* st_lsm6dsx
- Add some error logging.
* ti-ads7950
- SPDX
- Allow simultaneous buffered and polled reads. Needed on a Lego Mindstorms
EV3 where some channels are used for power supply monitoring at a very low
rate.
* ti-dac5571
- Remove an unused variable.
* xadc
- Drop some dead code.
|
|
|
|
Pull networking fixes from David Miller:
1) Handle stations tied to AP_VLANs properly during mac80211 hw
reconfig. From Manikanta Pubbisetty.
2) Fix jump stack depth validation in nf_tables, from Taehee Yoo.
3) Fix quota handling in aRFS flow expiration of mlx5 driver, from Eran
Ben Elisha.
4) Exit path handling fix in powerpc64 BPF JIT, from Daniel Borkmann.
5) Use ptr_ring_consume_bh() in page pool code, from Tariq Toukan.
6) Fix cached netdev name leak in nf_tables, from Florian Westphal.
7) Fix memory leaks on chain rename, also from Florian Westphal.
8) Several fixes to DCTCP congestion control ACK handling, from Yuchunk
Cheng.
9) Missing rcu_read_unlock() in CAIF protocol code, from Yue Haibing.
10) Fix link local address handling with VRF, from David Ahern.
11) Don't clobber 'err' on a successful call to __skb_linearize() in
skb_segment(). From Eric Dumazet.
12) Fix vxlan fdb notification races, from Roopa Prabhu.
13) Hash UDP fragments consistently, from Paolo Abeni.
14) If TCP receives lots of out of order tiny packets, we do really
silly stuff. Make the out-of-order queue ending more robust to this
kind of behavior, from Eric Dumazet.
15) Don't leak netlink dump state in nf_tables, from Florian Westphal.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (76 commits)
net: axienet: Fix double deregister of mdio
qmi_wwan: fix interface number for DW5821e production firmware
ip: in cmsg IP(V6)_ORIGDSTADDR call pskb_may_pull
bnx2x: Fix invalid memory access in rss hash config path.
net/mlx4_core: Save the qpn from the input modifier in RST2INIT wrapper
r8169: restore previous behavior to accept BIOS WoL settings
cfg80211: never ignore user regulatory hint
sock: fix sg page frag coalescing in sk_alloc_sg
netfilter: nf_tables: move dumper state allocation into ->start
tcp: add tcp_ooo_try_coalesce() helper
tcp: call tcp_drop() from tcp_data_queue_ofo()
tcp: detect malicious patterns in tcp_collapse_ofo_queue()
tcp: avoid collapses in tcp_prune_queue() if possible
tcp: free batches of packets in tcp_prune_ofo_queue()
ip: hash fragments consistently
ipv6: use fib6_info_hold_safe() when necessary
can: xilinx_can: fix power management handling
can: xilinx_can: fix incorrect clear of non-processed interrupts
can: xilinx_can: fix RX overflow interrupt not being enabled
can: xilinx_can: keep only 1-2 frames in TX FIFO to fix TX accounting
...
|
|
ib_post_(send|recv|srq_recv)() argument
This patch does not change the behavior of the modified functions.
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Implementing job_abort() does not make sense on some drivers.
This is not a problem, as the abort is not required to
wait for the job to finish. Quite the opposite, drivers
are encouraged not to wait.
Demote v4l2_m2m_ops.job_abort from required to optional, and
clean all drivers with dummy implementations.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Skbprio (SKB Priority Queue) is a queueing discipline that prioritizes packets
according to their skb->priority field. Under congestion, already-enqueued lower
priority packets will be dropped to make space available for higher priority
packets. Skbprio was conceived as a solution for denial-of-service defenses that
need to route packets with different priorities as a means to overcome DoS
attacks.
v5
*Do not reference qdisc_dev(sch)->tx_queue_len for setting limit. Instead set
default sch->limit to 64.
v4
*Drop Documentation/networking/sch_skbprio.txt doc file to move it to tc man
page for Skbprio, in iproute2.
v3
*Drop max_limit parameter in struct skbprio_sched_data and instead use
sch->limit.
*Reference qdisc_dev(sch)->tx_queue_len only once, during initialisation for
qdisc (previously being referenced every time qdisc changes).
*Move qdisc's detailed description from in-code to Documentation/networking.
*When qdisc is saturated, enqueue incoming packet first before dequeueing
lowest priority packet in queue - improves usage of call stack registers.
*Introduce and use overlimit stat to keep track of number of dropped packets.
v2
*Use skb->priority field rather than DS field. Rename queueing discipline as
SKB Priority Queue (previously Gatekeeper Priority Queue).
*Queueing discipline is made classful to expose Skbprio's internal priority
queues.
Signed-off-by: Nishanth Devarajan <ndev2021@gmail.com>
Reviewed-by: Sachin Paryani <sachin.paryani@gmail.com>
Reviewed-by: Cody Doucette <doucette@bu.edu>
Reviewed-by: Michel Machado <michel@digirati.com.br>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Certain PHY's have issues when operating in GBit slave mode and can
be forced to master mode. Examples are RTL8211C, also the Micrel PHY
driver has a DT setting to force master mode.
If two such chips are link partners the autonegotiation will fail.
Standard defines a self-clearing on read, latched-high bit to
indicate this error. Check this bit to inform the user.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is no way to control the standard of subdevices which are part of
a media device. The ioctls which exists all target video devices
explicitly and the idea is that the video device should talk to the
subdevice. For subdevices part of a media graph this is not possible and
the standard must be controlled on the subdev device directly.
Add four new ioctls to be able to directly interact with subdevices and
control the video standard; VIDIOC_SUBDEV_ENUMSTD, VIDIOC_SUBDEV_G_STD,
VIDIOC_SUBDEV_S_STD and VIDIOC_SUBDEV_QUERYSTD.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Move the NXP DPIO (Datapath I/O Driver) out of the
drivers/staging directory and into the drivers/soc/fsl directory.
The DPIO driver enables access to Queue and Buffer Manager (QBMAN)
hardware on NXP DPAA2 devices. This is a prerequisite to moving the
DPAA2 Ethernet driver out of staging.
Signed-off-by: Roy Pledge <roy.pledge@nxp.com>
Reviewed-by: Horia Geantă <horia.geanta@nxp.com>
Reviewed-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: Li Yang <leoyang.li@nxp.com>
|
|
Now only used by the bounce code, so move it there and mark the function
static.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Unused now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
