| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
mlx5-updates-2021-02-04
Vlad Buslov says:
=================
Implement support for VF tunneling
Abstract
Currently, mlx5 only supports configuration with tunnel endpoint IP address on
uplink representor. Remove implicit and explicit assumptions of tunnel always
being terminated on uplink and implement necessary infrastructure for
configuring tunnels on VF representors and updating rules on such tunnels
according to routing changes.
SW TC model
From TC perspective VF tunnel configuration requires two rules in both
directions:
TX rules
1. Rule that redirects packets from UL to VF rep that has the tunnel
endpoint IP address:
$ tc -s filter show dev enp8s0f0 ingress
filter protocol ip pref 4 flower chain 0
filter protocol ip pref 4 flower chain 0 handle 0x1
dst_mac 16:c9:a0:2d:69:2c
src_mac 0c:42:a1:58:ab:e4
eth_type ipv4
ip_flags nofrag
in_hw in_hw_count 1
action order 1: mirred (Egress Redirect to device enp8s0f0_0) stolen
index 3 ref 1 bind 1 installed 377 sec used 0 sec
Action statistics:
Sent 114096 bytes 952 pkt (dropped 0, overlimits 0 requeues 0)
Sent software 0 bytes 0 pkt
Sent hardware 114096 bytes 952 pkt
backlog 0b 0p requeues 0
cookie 878fa48d8c423fc08c3b6ca599b50a97
no_percpu
used_hw_stats delayed
2. Rule that decapsulates the tunneled flow and redirects to destination VF
representor:
$ tc -s filter show dev vxlan_sys_4789 ingress
filter protocol ip pref 4 flower chain 0
filter protocol ip pref 4 flower chain 0 handle 0x1
dst_mac ca:2e:a7:3f:f5:0f
src_mac 0a:40:bd:30:89:99
eth_type ipv4
enc_dst_ip 7.7.7.5
enc_src_ip 7.7.7.1
enc_key_id 98
enc_dst_port 4789
enc_tos 0
ip_flags nofrag
in_hw in_hw_count 1
action order 1: tunnel_key unset pipe
index 2 ref 1 bind 1 installed 434 sec used 434 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
used_hw_stats delayed
action order 2: mirred (Egress Redirect to device enp8s0f0_1) stolen
index 4 ref 1 bind 1 installed 434 sec used 0 sec
Action statistics:
Sent 129936 bytes 1082 pkt (dropped 0, overlimits 0 requeues 0)
Sent software 0 bytes 0 pkt
Sent hardware 129936 bytes 1082 pkt
backlog 0b 0p requeues 0
cookie ac17cf398c4c69e4a5b2f7aabd1b88ff
no_percpu
used_hw_stats delayed
RX rules
1. Rule that encapsulates the tunneled flow and redirects packets from
source VF rep to tunnel device:
$ tc -s filter show dev enp8s0f0_1 ingress
filter protocol ip pref 4 flower chain 0
filter protocol ip pref 4 flower chain 0 handle 0x1
dst_mac 0a:40:bd:30:89:99
src_mac ca:2e:a7:3f:f5:0f
eth_type ipv4
ip_tos 0/0x3
ip_flags nofrag
in_hw in_hw_count 1
action order 1: tunnel_key set
src_ip 7.7.7.5
dst_ip 7.7.7.1
key_id 98
dst_port 4789
nocsum
ttl 64 pipe
index 1 ref 1 bind 1 installed 411 sec used 411 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
no_percpu
used_hw_stats delayed
action order 2: mirred (Egress Redirect to device vxlan_sys_4789) stolen
index 1 ref 1 bind 1 installed 411 sec used 0 sec
Action statistics:
Sent 5615833 bytes 4028 pkt (dropped 0, overlimits 0 requeues 0)
Sent software 0 bytes 0 pkt
Sent hardware 5615833 bytes 4028 pkt
backlog 0b 0p requeues 0
cookie bb406d45d343bf7ade9690ae80c7cba4
no_percpu
used_hw_stats delayed
2. Rule that redirects from tunnel device to UL rep:
$ tc -s filter show dev vxlan_sys_4789 ingress
filter protocol ip pref 4 flower chain 0
filter protocol ip pref 4 flower chain 0 handle 0x1
dst_mac ca:2e:a7:3f:f5:0f
src_mac 0a:40:bd:30:89:99
eth_type ipv4
enc_dst_ip 7.7.7.5
enc_src_ip 7.7.7.1
enc_key_id 98
enc_dst_port 4789
enc_tos 0
ip_flags nofrag
in_hw in_hw_count 1
action order 1: tunnel_key unset pipe
index 2 ref 1 bind 1 installed 434 sec used 434 sec
Action statistics:
Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0)
backlog 0b 0p requeues 0
used_hw_stats delayed
action order 2: mirred (Egress Redirect to device enp8s0f0_1) stolen
index 4 ref 1 bind 1 installed 434 sec used 0 sec
Action statistics:
Sent 129936 bytes 1082 pkt (dropped 0, overlimits 0 requeues 0)
Sent software 0 bytes 0 pkt
Sent hardware 129936 bytes 1082 pkt
backlog 0b 0p requeues 0
cookie ac17cf398c4c69e4a5b2f7aabd1b88ff
no_percpu
used_hw_stats delayed
HW offloads model
For hardware offload the goal is to mach packet on both rules without exposing
it to software on tunnel endpoint VF. In order to achieve this for tx, TC
implementation marks encap rules with tunnel endpoint on mlx5 VF of same eswitch
with MLX5_ESW_DEST_CHAIN_WITH_SRC_PORT_CHANGE flag and adds header modification
rule to overwrite packet source port to the value of tunnel VF. Eswitch code is
modified to recirculate such packets after source port value is changed, which
allows second tx rules to match.
For rx path indirect table infrastructure is used to allow fully processing VF
tunnel traffic in hardware. To implement such pipeline driver needs to program
the hardware after matching on UL rule to overwrite source vport from UL to
tunnel VF and recirculate the packet to the root table to allow matching on the
rule installed on tunnel VF. For this, indirect table matches all encapsulated
traffic by tunnel parameters and all other IP traffic is sent to tunnel VF by
the miss rule. Such configuration will cause packet to appear on VF representor
instead of VF itself if packet has been matches by indirect table rule based on
tunnel parameters but missed on second rule (after recirculation). Handle such
case by marking packets processed by indirect table with special 0xFFF value in
reg_c1 and extending slow table with additional flow group that matches on
reg_c0 (source port value set by indirect tables) and reg_c1 (special 0xFFF
mark). When creating offloads fdb tables, install one rule per VF vport to match
on recirculated miss packets and redirect them to appropriate VF vport.
Routing events
In order to support routing changes and migration of tunnel device between
different endpoint VFs, implement routing infrastructure and update it with FIB
events. Routing entry table is introduced to mlx5 TC. Every rx and tx VF tunnel
rule is attached to a routing entry, which is shared for rules of same tunnel.
On FIB event the work is scheduled to delete/recreate all rules of affected
tunnel.
Note: only vxlan tunnel type is supported by this series.
=================
|
|
A ZONE_APPEND bio must follow hardware restrictions (e.g. not exceeding
max_zone_append_sectors) not to be split. bio_iov_iter_get_pages builds
such restricted bio using __bio_iov_append_get_pages if bio_op(bio) ==
REQ_OP_ZONE_APPEND.
To utilize it, we need to set the bio_op before calling
bio_iov_iter_get_pages(). This commit introduces IOMAP_F_ZONE_APPEND, so
that iomap user can set the flag to indicate they want REQ_OP_ZONE_APPEND
and restricted bio.
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Add bio_add_zone_append_page(), a wrapper around bio_add_hw_page() which
is intended to be used by file systems that directly add pages to a bio
instead of using bio_iov_iter_get_pages().
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Often when I'm debugging ENOSPC related issues I have to resort to
printing the entire ENOSPC state with trace_printk() in different spots.
This gets pretty annoying, so add a trace state that does this for us.
Then add a trace point at the end of preemptive flushing so you can see
the state of the space_info when we decide to exit preemptive flushing.
This helped me figure out we weren't kicking in the preemptive flushing
soon enough.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Since we have normal ticketed flushing and preemptive flushing, adjust
the tracepoint so that we know the source of the flushing action to make
it easier to debug problems.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Solely for preemptive flushing, we want to be able to force the
transaction commit without any of the ambiguity of
may_commit_transaction(). This is because may_commit_transaction()
checks tickets and such, and in preemptive flushing we already know
it'll be helpful, so use this to keep the code nice and clean and
straightforward.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
[ add comment ]
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
While debugging a ENOSPC related performance problem I needed to see the
time difference between start and end of a reserve ticket, so add a
trace point to report when we handle a reserve ticket.
I opted to spit out start_ns itself without calculating the difference
because there could be a gap between enabling the tracepoint and setting
start_ns. Doing it this way allows us to filter on 0 start_ns so we
don't get bogus entries, and we can easily calculate the time difference
with bpftrace or something else.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
These constants are really used internally by zstd and including
linux/zstd.h into users results in the following warnings:
In file included from fs/btrfs/zstd.c:19:
./include/linux/zstd.h:798:21: warning: ‘ZSTD_skippableHeaderSize’ defined but not used [-Wunused-const-variable=]
798 | static const size_t ZSTD_skippableHeaderSize = 8;
| ^~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/zstd.h:796:21: warning: ‘ZSTD_frameHeaderSize_max’ defined but not used [-Wunused-const-variable=]
796 | static const size_t ZSTD_frameHeaderSize_max = ZSTD_FRAMEHEADERSIZE_MAX;
| ^~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/zstd.h:795:21: warning: ‘ZSTD_frameHeaderSize_min’ defined but not used [-Wunused-const-variable=]
795 | static const size_t ZSTD_frameHeaderSize_min = ZSTD_FRAMEHEADERSIZE_MIN;
| ^~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/zstd.h:794:21: warning: ‘ZSTD_frameHeaderSize_prefix’ defined but not used [-Wunused-const-variable=]
794 | static const size_t ZSTD_frameHeaderSize_prefix = 5;
So fix those warnings by turning the constants into defines.
Reviewed-by: Nick Terrell <terrelln@fb.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
[BUG]
There is a long existing bug in the last parameter of
btrfs_add_ordered_extent(), in commit 771ed689d2cd ("Btrfs: Optimize
compressed writeback and reads") back to 2008.
In that ancient commit btrfs_add_ordered_extent() expects the @type
parameter to be one of the following:
- BTRFS_ORDERED_REGULAR
- BTRFS_ORDERED_NOCOW
- BTRFS_ORDERED_PREALLOC
- BTRFS_ORDERED_COMPRESSED
But we pass 0 in cow_file_range(), which means BTRFS_ORDERED_IO_DONE.
Ironically extra check in __btrfs_add_ordered_extent() won't set the bit
if we see (type == IO_DONE || type == IO_COMPLETE), and avoid any
obvious bug.
But this still leads to regular COW ordered extent having no bit to
indicate its type in various trace events, rendering REGULAR bit
useless.
[FIX]
Change the following aspects to avoid such problem:
- Reorder btrfs_ordered_extent::flags
Now the type bits go first (REGULAR/NOCOW/PREALLCO/COMPRESSED), then
DIRECT bit, finally extra status bits like IO_DONE/COMPLETE/IOERR.
- Add extra ASSERT() for btrfs_add_ordered_extent_*()
- Remove @type parameter for btrfs_add_ordered_extent_compress()
As the only valid @type here is BTRFS_ORDERED_COMPRESSED.
- Remove the unnecessary special check for IO_DONE/COMPLETE in
__btrfs_add_ordered_extent()
This is just to make the code work, with extra ASSERT(), there are
limited values can be passed in.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
git://git.open-mesh.org/linux-merge
Simon Wunderlich says:
====================
This feature/cleanup patchset is an updated version of the pull request
of Feb 2nd (batadv-next-pullrequest-20210202) and includes the
following patches:
- Bump version strings, by Simon Wunderlich (added commit log)
- Drop publication years from copyright info, by Sven Eckelmann
(replaced the previous patch which updated copyright years, as per
our discussion)
- Avoid sizeof on flexible structure, by Sven Eckelmann (unchanged)
- Fix names for kernel-doc blocks, by Sven Eckelmann (unchanged)
* tag 'batadv-next-pullrequest-20210208' of git://git.open-mesh.org/linux-merge:
batman-adv: Fix names for kernel-doc blocks
batman-adv: Avoid sizeof on flexible structure
batman-adv: Drop publication years from copyright info
batman-adv: Start new development cycle
====================
Link: https://lore.kernel.org/r/20210208165938.13262-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add new clock definition to gcc-msm8998 dt-bindings
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Link: https://lore.kernel.org/r/20210114221059.483390-4-angelogioacchino.delregno@somainline.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add new clock definition to gcc-msm8998 dt-bindings.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Link: https://lore.kernel.org/r/20210114221059.483390-2-angelogioacchino.delregno@somainline.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Two indexes need to be added to videocc-sm8250.h for venus to function
properly. Rather than adding the missing indexes when used we add them
separately here to keep checkpatch.pl happy.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20210204150120.1521959-2-bryan.odonoghue@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add device tree bindings for global clock controller on SM8350 SoCs.
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20210127070811.152690-5-vkoul@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add devicetree binding for the global clock controller found in the
Qualcomm SC8180x platform.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210126043155.1847823-1-bjorn.andersson@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
If the page cache is invalid, then we can't do read-modify-write, so
ensure that we do clear it when we know it is invalid.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
|
|
When user gives us a block address to get its ID to mmap it, he also
needs to get from us the block size to pass to the driver in the mmap
function.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
User must be aware of the available CQs when it needs to use them.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Instead of encoding of the bvec pool using magic bio flags, just use
a helper to find the pool based on the max_vecs value.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The bi_max_vecs and bi_vcnt fields are defined as unsigned short, so
don't allow passing larger values in.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
struct biovec_slab is only used inside of bio.c, so move it there.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
<jee.heng.sia@intel.com>:
The below patch series are to support Audio over HDMI.
The modification in this patch series shall allow I2S driver
to playback standard PCM format and IEC958 encoded format to
the ADV7511 HDMI chip.
ALSA IEC958 plugin will be used to compose the IEC958 format.
Existing hdmi-codec driver only support standard pcm format.
Support of IEC958 encoded format passdown from ALSA IEC958 plugin
is needed so that the IEC958 encoded data can be streamed to the
HDMI chip.
Sia Jee Heng (4):
ASoC: codec: hdmi-codec: Support IEC958 encoded PCM format
drm: bridge: adv7511: Support I2S IEC958 encoded PCM format
dt-bindings: sound: Intel, Keembay-i2s: Add hdmi-i2s compatible string
ASoC: Intel: KMB: Support IEC958 encoded PCM format
.../bindings/sound/intel,keembay-i2s.yaml | 1 +
drivers/gpu/drm/bridge/adv7511/adv7511.h | 1 +
.../gpu/drm/bridge/adv7511/adv7511_audio.c | 6 ++
include/sound/hdmi-codec.h | 5 ++
sound/soc/codecs/hdmi-codec.c | 4 +-
sound/soc/intel/keembay/kmb_platform.c | 73 ++++++++++++++++++-
sound/soc/intel/keembay/kmb_platform.h | 1 +
7 files changed, 89 insertions(+), 2 deletions(-)
base-commit: 2557c711b87cd42bb22be9ca6ff3fce038624f30
--
2.18.0
|
|
The extended HDA bus (hdac_ext) provides interfaces for more
fine-grained control of individual links than what plain HDA
provides for. Links can be powered off when they are not used and if
all links are released, controller can shut down the command DMA.
These interfaces are currently not used by common HDA codec drivers.
When a HDA codec is runtime suspended, it calls snd_hdac_codec_link_down(),
but there is no link to the HDA extended bus, and on controller side
the links are shut down only when all codecs are suspended.
This patch adds link_power() to hdac_bus ops. Controllers using the HDA
extended core, can use this to plug in snd_hdac_ext_bus_link_power() to
implement more fine-grained control of link power.
No change is needed for plain HDA controllers nor to existing HDA
codec drivers.
Co-developed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210205184630.1938761-2-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
After loading firmware, the driver triggers ATI (calibration) with
the newly loaded register configuration in place. Next, the driver
polls a register field to ensure ATI completed in a timely fashion
and that the device is ready to sense.
However, communicating with the device over I2C while ATI is under-
way may induce noise in the device and cause ATI to fail. As such,
the vendor recommends not to poll the device during ATI.
To solve this problem, let the device naturally signal to the host
that ATI is complete by way of an interrupt. A completion prevents
the sub-devices from being registered until this happens.
The former logic that scaled ATI timeout and filter settling delay
is not carried forward with the new implementation, as it produces
overly conservative delays at lower clock rates. Instead, a single
pair of delays that covers all cases is used.
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Create two sysfs entries for exposing the MAC address and count
from the MAX10 BMC register space. The MAC address is the first
in a sequential block of MAC addresses reserved for the FPGA card.
The MAC count is the number of MAC addresses in the reserved block.
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Start all helpers with "MFD_CELL_".
Cc: Gene Chen <gene_chen@richtek.com>
Cc: linux-mediatek@lists.infradead.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
'ib-mfd-gpio-regulator-5.12' into ibs-for-mfd-merged
|
|
Add support for an additional filesystem version (sb_fs_format = 1802).
When a filesystem with the new version is mounted, the filesystem
supports "trusted.*" xattrs.
In addition, version 1802 filesystems implement a form of forward
compatibility for xattrs: when xattrs with an unknown prefix (ea_type)
are found on a version 1802 filesystem, those attributes are not shown
by listxattr, and they are not accessible by getxattr, setxattr, or
removexattr.
This mechanism might turn out to be what we need in the future, but if
not, we can always bump the filesystem version and break compatibility
instead.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Andrew Price <anprice@redhat.com>
|
|
s/provied/provided/
Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com>
Link: https://lore.kernel.org/r/20210208114928.32241-1-unixbhaskar@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The commit de3ee99b097d ("mmc: Delete bounce buffer handling") removed the
bounce buffer handling from the mmc core, but forgot to remove the bouncesz
member from the struct mmc_card, let's fix it.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20210202101626.64503-1-ulf.hansson@linaro.org
|
|
The Kconfig option to use the blk-mq support was removed in commit
1bec43a3b181 ("mmc: core: Remove option not to use blk-mq"), but forgot to
remove the use_blk_mq member in the struct mmc_host, let's fix it.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20210202101924.69970-1-ulf.hansson@linaro.org
|
|
The MT6315 is a regulator found on boards based on MediaTek MT8192 and
probably other SoCs. It connects as a slave to SoC using SPMI.
Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
Link: https://lore.kernel.org/r/1612678457-11548-3-git-send-email-hsin-hsiung.wang@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Existing hdmi-codec driver only support standard pcm format.
Support of IEC958 encoded format pass from ALSA IEC958 plugin is needed
so that the IEC958 encoded data can be streamed to the HDMI chip.
Signed-off-by: Sia Jee Heng <jee.heng.sia@intel.com>
Link: https://lore.kernel.org/r/20210204014258.10197-2-jee.heng.sia@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Following functions are renamed for a better global visibility.
graph_card_probe() --> audio_graph_card_probe()
graph_parse_of() --> audio_graph_parse_of()
graph_remove() --> audio_graph_remove() [exported as well]
The references of these are updated in audio graph and Tegra audio
graph card drivers.
Signed-off-by: Sameer Pujar <spujar@nvidia.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/1612719418-5858-2-git-send-email-spujar@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
EXPORT_UNUSED_SYMBOL* is not actually used anywhere. Remove the
unused functionality as we generally just remove unused code anyway.
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
|
|
As far as I can tell this has never been used at all, and certainly
not any time recently.
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
|
|
struct symsearch is only used inside of module.h, so move the definition
out of module.h.
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
|
|
Except for two lockdep asserts module_mutex is only used in module.c.
Remove the two asserts given that the functions they are in are not
exported and just called from the module code, and mark module_mutex
static.
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
|
|
kallsyms_on_each_symbol and module_kallsyms_on_each_symbol are only used
by the livepatching code, so don't build them if livepatching is not
enabled.
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
|
|
Fix the following coccicheck warnings:
./include/linux/ssb/ssb_driver_gige.h:89:8-9: WARNING: return of 0/1 in
function 'ssb_gige_one_dma_at_once' with return type bool.
./include/linux/ssb/ssb_driver_gige.h:79:8-9: WARNING: return of 0/1 in
function 'ssb_gige_have_roboswitch' with return type bool.
./include/linux/ssb/ssb_driver_gige.h:182:8-9: WARNING: return of 0/1 in
function 'ssb_gige_must_flush_posted_writes' with return type bool.
./include/linux/ssb/ssb_driver_gige.h:178:8-9: WARNING: return of 0/1 in
function 'ssb_gige_one_dma_at_once' with return type bool.
./include/linux/ssb/ssb_driver_gige.h:174:8-9: WARNING: return of 0/1 in
function 'ssb_gige_have_roboswitch' with return type bool.
./include/linux/ssb/ssb_driver_gige.h:170:8-9: WARNING: return of 0/1 in
function 'ssb_gige_is_rgmii' with return type bool.
./include/linux/ssb/ssb_driver_gige.h:162:8-9: WARNING: return of 0/1 in
function 'pdev_is_ssb_gige_core' with return type bool.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Acked-by: Michael Büsch <m@bues.ch>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1612508199-92282-1-git-send-email-jiapeng.chong@linux.alibaba.com
|
|
Allow for a RCU-sched critical section around find_module, following
the lower level find_module_all helper, and switch the two callers
outside of module.c to use such a RCU-sched critical section instead
of module_mutex.
Reviewed-by: Petr Mladek <pmladek@suse.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jessica Yu <jeyu@kernel.org>
|
|
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add support for FS_VERITY_METADATA_TYPE_SIGNATURE to
FS_IOC_READ_VERITY_METADATA. This allows a userspace server program to
retrieve the built-in signature (if present) of a verity file for
serving to a client which implements fs-verity compatible verification.
See the patch which introduced FS_IOC_READ_VERITY_METADATA for more
details.
The ability for userspace to read the built-in signatures is also useful
because it allows a system that is using the in-kernel signature
verification to migrate to userspace signature verification.
This has been tested using a new xfstest which calls this ioctl via a
new subcommand for the 'fsverity' program from fsverity-utils.
Link: https://lore.kernel.org/r/20210115181819.34732-7-ebiggers@kernel.org
Reviewed-by: Victor Hsieh <victorhsieh@google.com>
Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Add support for FS_VERITY_METADATA_TYPE_DESCRIPTOR to
FS_IOC_READ_VERITY_METADATA. This allows a userspace server program to
retrieve the fs-verity descriptor of a file for serving to a client
which implements fs-verity compatible verification. See the patch which
introduced FS_IOC_READ_VERITY_METADATA for more details.
"fs-verity descriptor" here means only the part that userspace cares
about because it is hashed to produce the file digest. It doesn't
include the signature which ext4 and f2fs append to the
fsverity_descriptor struct when storing it on-disk, since that way of
storing the signature is an implementation detail. The next patch adds
a separate metadata_type value for retrieving the signature separately.
This has been tested using a new xfstest which calls this ioctl via a
new subcommand for the 'fsverity' program from fsverity-utils.
Link: https://lore.kernel.org/r/20210115181819.34732-6-ebiggers@kernel.org
Reviewed-by: Victor Hsieh <victorhsieh@google.com>
Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Add support for FS_VERITY_METADATA_TYPE_MERKLE_TREE to
FS_IOC_READ_VERITY_METADATA. This allows a userspace server program to
retrieve the Merkle tree of a verity file for serving to a client which
implements fs-verity compatible verification. See the patch which
introduced FS_IOC_READ_VERITY_METADATA for more details.
This has been tested using a new xfstest which calls this ioctl via a
new subcommand for the 'fsverity' program from fsverity-utils.
Link: https://lore.kernel.org/r/20210115181819.34732-5-ebiggers@kernel.org
Reviewed-by: Victor Hsieh <victorhsieh@google.com>
Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
Add an ioctl FS_IOC_READ_VERITY_METADATA which will allow reading verity
metadata from a file that has fs-verity enabled, including:
- The Merkle tree
- The fsverity_descriptor (not including the signature if present)
- The built-in signature, if present
This ioctl has similar semantics to pread(). It is passed the type of
metadata to read (one of the above three), and a buffer, offset, and
size. It returns the number of bytes read or an error.
Separate patches will add support for each of the above metadata types.
This patch just adds the ioctl itself.
This ioctl doesn't make any assumption about where the metadata is
stored on-disk. It does assume the metadata is in a stable format, but
that's basically already the case:
- The Merkle tree and fsverity_descriptor are defined by how fs-verity
file digests are computed; see the "File digest computation" section
of Documentation/filesystems/fsverity.rst. Technically, the way in
which the levels of the tree are ordered relative to each other wasn't
previously specified, but it's logical to put the root level first.
- The built-in signature is the value passed to FS_IOC_ENABLE_VERITY.
This ioctl is useful because it allows writing a server program that
takes a verity file and serves it to a client program, such that the
client can do its own fs-verity compatible verification of the file.
This only makes sense if the client doesn't trust the server and if the
server needs to provide the storage for the client.
More concretely, there is interest in using this ability in Android to
export APK files (which are protected by fs-verity) to "protected VMs".
This would use Protected KVM (https://lwn.net/Articles/836693), which
provides an isolated execution environment without having to trust the
traditional "host". A "guest" VM can boot from a signed image and
perform specific tasks in a minimum trusted environment using files that
have fs-verity enabled on the host, without trusting the host or
requiring that the guest has its own trusted storage.
Technically, it would be possible to duplicate the metadata and store it
in separate files for serving. However, that would be less efficient
and would require extra care in userspace to maintain file consistency.
In addition to the above, the ability to read the built-in signatures is
useful because it allows a system that is using the in-kernel signature
verification to migrate to userspace signature verification.
Link: https://lore.kernel.org/r/20210115181819.34732-4-ebiggers@kernel.org
Reviewed-by: Victor Hsieh <victorhsieh@google.com>
Acked-by: Jaegeuk Kim <jaegeuk@kernel.org>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Borislav Petkov:
- Prevent device managed IRQ allocation helpers from returning IRQ 0
- A fix for MSI activation of PCI endpoints with multiple MSIs
* tag 'irq_urgent_for_v5.11_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Prevent [devm_]irq_alloc_desc from returning irq 0
genirq/msi: Activate Multi-MSI early when MSI_FLAG_ACTIVATE_EARLY is set
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull syscall entry fixes from Borislav Petkov:
- For syscall user dispatch, separate prctl operation from syscall
redirection range specification before the API has been made official
in 5.11.
- Ensure tasks using the generic syscall code do trap after returning
from a syscall when single-stepping is requested.
* tag 'core_urgent_for_v5.11_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
entry: Use different define for selector variable in SUD
entry: Ensure trap after single-step on system call return
|
|
add toprgu reset-controller head file for MT8192 platform
Signed-off-by: Crystal Guo <crystal.guo@mediatek.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20201014131936.20584-4-crystal.guo@mediatek.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
sdw_write_no_pm and sdw_read_no_pm are useful when we want to do IO
without touching PM.
Fixes: 0231453bc08f ('soundwire: bus: add clock stop helpers')
Fixes: 60ee9be25571 ('soundwire: bus: add PM/no-PM versions of read/write functions')
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20210122070634.12825-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
