| Age | Commit message (Collapse) | Author |
|---|
|
With both the increased use of swait and kvm no longer using
it, we can reword some of the comments. While removing Linus'
valid rant, I've also cared to explicitly mention that swait
is very different than regular wait. In addition it is
mentioned against using swait in favor of the regular flavor.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200422040739.18601-6-dave@stgolabs.net
|
|
In the CPU-offline process, it calls mmdrop() after idle entry and the
subsequent call to cpuhp_report_idle_dead(). Once execution passes the
call to rcu_report_dead(), RCU is ignoring the CPU, which results in
lockdep complaining when mmdrop() uses RCU from either memcg or
debugobjects below.
Fix it by cleaning up the active_mm state from BP instead. Every arch
which has CONFIG_HOTPLUG_CPU should have already called idle_task_exit()
from AP. The only exception is parisc because it switches them to
&init_mm unconditionally (see smp_boot_one_cpu() and smp_cpu_init()),
but the patch will still work there because it calls mmgrab(&init_mm) in
smp_cpu_init() and then should call mmdrop(&init_mm) in finish_cpu().
WARNING: suspicious RCU usage
-----------------------------
kernel/workqueue.c:710 RCU or wq_pool_mutex should be held!
other info that might help us debug this:
RCU used illegally from offline CPU!
Call Trace:
dump_stack+0xf4/0x164 (unreliable)
lockdep_rcu_suspicious+0x140/0x164
get_work_pool+0x110/0x150
__queue_work+0x1bc/0xca0
queue_work_on+0x114/0x120
css_release+0x9c/0xc0
percpu_ref_put_many+0x204/0x230
free_pcp_prepare+0x264/0x570
free_unref_page+0x38/0xf0
__mmdrop+0x21c/0x2c0
idle_task_exit+0x170/0x1b0
pnv_smp_cpu_kill_self+0x38/0x2e0
cpu_die+0x48/0x64
arch_cpu_idle_dead+0x30/0x50
do_idle+0x2f4/0x470
cpu_startup_entry+0x38/0x40
start_secondary+0x7a8/0xa80
start_secondary_resume+0x10/0x14
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Qian Cai <cai@lca.pw>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Link: https://lkml.kernel.org/r/20200401214033.8448-1-cai@lca.pw
|
|
That flag is set unconditionally in sd_init(), and no one checks for it
anymore. Remove it.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200415210512.805-5-valentin.schneider@arm.com
|
|
Change objtool to support intra-function calls. On x86, an intra-function
call is represented in objtool as a push onto the stack (of the return
address), and a jump to the destination address. That way the stack
information is correctly updated and the call flow is still accurate.
Signed-off-by: Alexandre Chartre <alexandre.chartre@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/20200414103618.12657-4-alexandre.chartre@oracle.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
mlx5 updates for both net-next and rdma-next:
1) HW bits and definitions for TLS and IPsec offlaods
2) Release all pages capability bits
3) New command interface helpers and some code cleanup as a result
4) Move qp.c out of mlx5 core driver into mlx5_ib rdma driver
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into for-next/asm
As agreed with Boris, merge in the 'x86/asm' branch from -tip so that we
can select the new 'ARCH_USE_SYM_ANNOTATIONS' Kconfig symbol, which is
required by the BTI kernel patches.
* 'x86/asm' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/asm: Provide a Kconfig symbol for disabling old assembly annotations
x86/32: Remove CONFIG_DOUBLEFAULT
|
|
Fix documentation warnings in dma-buf.[hc]:
../drivers/dma-buf/dma-buf.c:678: warning: Function parameter or member 'importer_ops' not described in 'dma_buf_dynamic_attach'
../drivers/dma-buf/dma-buf.c:678: warning: Function parameter or member 'importer_priv' not described in 'dma_buf_dynamic_attach'
../include/linux/dma-buf.h:339: warning: Incorrect use of kernel-doc format: * @move_notify
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: linux-media@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/7bcbe6fe-0b4b-87da-d003-b68a26eb4cf0@infradead.org
|
|
Add support for looking up memory regions by name. This looks up the
given name in the newly introduced memory-region-names property and
returns the memory region at the corresponding index in the memory-
region(s) property.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
To provide support for SEV-ES, the hypervisor must provide an area of
memory to the PSP. Once this Trusted Memory Region (TMR) is provided to
the PSP, the contents of this area of memory are no longer available to
the x86.
Update the PSP driver to allocate a 1MB region for the TMR that is 1MB
aligned and then provide it to the PSP through the SEV INIT command.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Brijesh Singh <brijesh.singh@amd.com>
Reviewed-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Removing the pcrypt module triggers this:
general protection fault, probably for non-canonical
address 0xdead000000000122
CPU: 5 PID: 264 Comm: modprobe Not tainted 5.6.0+ #2
Hardware name: QEMU Standard PC
RIP: 0010:__cpuhp_state_remove_instance+0xcc/0x120
Call Trace:
padata_sysfs_release+0x74/0xce
kobject_put+0x81/0xd0
padata_free+0x12/0x20
pcrypt_exit+0x43/0x8ee [pcrypt]
padata instances wrongly use the same hlist node for the online and dead
states, so __padata_free()'s second cpuhp remove call chokes on the node
that the first poisoned.
cpuhp multi-instance callbacks only walk forward in cpuhp_step->list and
the same node is linked in both the online and dead lists, so the list
corruption that results from padata_alloc() adding the node to a second
list without removing it from the first doesn't cause problems as long
as no instances are freed.
Avoid the issue by giving each state its own node.
Fixes: 894c9ef9780c ("padata: validate cpumask without removed CPU during offline")
Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: linux-crypto@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
claiming sensors
Allocate callbacks array before enumerating the sensors: The probe routine
for these sensors (for instance cros_ec_sensors_probe) can be called
within the sensorhub probe routine (cros_ec_sensors_probe())
Fixes: 145d59baff594 ("platform/chrome: cros_ec_sensorhub: Add FIFO support")
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Reported-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
|
|
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for nf-next:
1) Add IPS_HW_OFFLOAD status bit, from Bodong Wang.
2) Remove 128-bit limit on the set element data area, rise it
to 64 bytes.
3) Report EOPNOTSUPP for unsupported NAT types and flags.
4) Set up nft_nat flags from the control plane path.
5) Add helper functions to set up the nf_nat_range2 structure.
6) Add netmap support for nft_nat.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
<kuninori.morimoto.gx@renesas.com>
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
We have soc-dai.c today. DAI related functions
should be implemented in it.
These patches are v2 of doing it.
Link: https://lore.kernel.org/r/871rofunaq.wl-kuninori.morimoto.gx@renesas.com
Kuninori Morimoto (17):
ASoC: soc-dai: add soc_dai_err()
ASoC: soc-dai: don't overwide dai->driver->ops
ASoC: soc-dai: add snd_soc_pcm_dai_new()
ASoC: soc-dai: add snd_soc_pcm_dai_prepare()
ASoC: soc-dai: add snd_soc_pcm_dai_trigger()
ASoC: soc-dai: add snd_soc_pcm_dai_bespoke_trigger()
ASoC: soc-dai: add snd_soc_pcm_dai_probe()
ASoC: soc-dai: add snd_soc_pcm_dai_remove()
ASoC: soc-dai: add snd_soc_dai_compr_start()
ASoC: soc-dai: add snd_soc_dai_compr_shutdown()
ASoC: soc-dai: add snd_soc_dai_compr_trigger()
ASoC: soc-dai: add snd_soc_dai_compr_set_params()
ASoC: soc-dai: add snd_soc_dai_compr_get_params()
ASoC: soc-dai: add snd_soc_dai_compr_ack()
ASoC: soc-dai: add snd_soc_dai_compr_pointer()
ASoC: soc-dai: add snd_soc_dai_compr_set_metadata()
ASoC: soc-dai: add snd_soc_dai_compr_get_metadata()
include/sound/soc-dai.h | 41 +++-
sound/soc/soc-compress.c | 104 ++++-----
sound/soc/soc-core.c | 85 +-------
sound/soc/soc-dai.c | 453 +++++++++++++++++++++++++++++----------
sound/soc/soc-pcm.c | 50 +----
5 files changed, 434 insertions(+), 299 deletions(-)
--
2.17.1
|
|
Let's just calculate the hsync rate on demand. No point in wasting
space storing it and risking the cached value getting out of sync
with reality.
v2: Move drm_mode_hsync() next to its only users
Drop the TODO
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com> #v1
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200428171940.19552-2-ville.syrjala@linux.intel.com
|
|
BIO_QUEUE_ENTERED is only used for cgroup accounting now, so rename
the flag and move setting it into the cgroup code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
As of now HE operation element in bss_conf includes variable length
optional field followed by other HE variable. Though the optional
field never be used, actually it is referring to next member of the
bss_conf structure which is not correct. Fix it by declaring needed
HE operation fields within bss_conf itself.
Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
Link: https://lore.kernel.org/r/1587768108-25248-2-git-send-email-rmanohar@codeaurora.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Old versions of gcc (tested on gcc-4.8) produce a warning for
correct code:
sound/soc/soc-compress.c: In function 'soc_compr_open':
sound/soc/soc-compress.c:75:28: error: 'component' is used uninitialized in this function [-Werror=uninitialized]
struct snd_soc_component *component, *save = NULL;
Change the for_each_rtd_components() macro to ensure 'component'
gets initialized to a value the compiler does not complain about.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200428214754.3925368-1-arnd@arndb.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
dai related function should be implemented at soc-dai.c.
This patch adds snd_soc_dai_compr_get_metadata().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87eesdssi8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
dai related function should be implemented at soc-dai.c.
This patch adds snd_soc_dai_compr_set_metadata().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87ftctssid.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
dai related function should be implemented at soc-dai.c.
This patch adds snd_soc_dai_compr_pointer().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87h7x9ssii.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
dai related function should be implemented at soc-dai.c.
This patch adds snd_soc_dai_compr_ack().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87imhpssim.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
dai related function should be implemented at soc-dai.c.
This patch adds snd_soc_dai_compr_get_params().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87k125ssir.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
dai related function should be implemented at soc-dai.c.
This patch adds snd_soc_dai_compr_set_params().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87lfmlssiv.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
dai related function should be implemented at soc-dai.c.
This patch adds snd_soc_dai_compr_trigger().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87mu71ssiz.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
dai related function should be implemented at soc-dai.c.
This patch adds snd_soc_dai_compr_shutdown().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87o8rhssj3.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
dai related function should be implemented at soc-dai.c.
This patch adds snd_soc_dai_compr_start().
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87pnbxssj7.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We have 2 type of component functions
snd_soc_dai_xxx() is focusing to dai itself,
snd_soc_pcm_dai_xxx() is focusing to rtd related dai.
Now we can update snd_soc_dai_remove() to
snd_soc_pcm_dai_remove(). This patch do it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87r1wdssjc.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We have 2 type of component functions
snd_soc_dai_xxx() is focusing to dai itself,
snd_soc_pcm_dai_xxx() is focusing to rtd related dai.
Now we can update snd_soc_dai_probe() to
snd_soc_pcm_dai_probe(). This patch do it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87sggtssjg.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We have 2 type of component functions
snd_soc_dai_xxx() is focusing to dai itself,
snd_soc_pcm_dai_xxx() is focusing to rtd related dai.
Now we can update soc_pcm_bespoke_trigger() to
snd_soc_pcm_dai_bespoke_trigger(). This patch do it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87tv19ssjm.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We have 2 type of component functions
snd_soc_dai_xxx() is focusing to dai itself,
snd_soc_pcm_dai_xxx() is focusing to rtd related dai.
Now we can update snd_soc_dai_trigger() to
snd_soc_pcm_dai_trigger(). This patch do it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87v9lpssjr.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We have 2 type of component functions
snd_soc_dai_xxx() is focusing to dai itself,
snd_soc_pcm_dai_xxx() is focusing to rtd related dai.
Now we can update snd_soc_dai_prepare() to
snd_soc_pcm_dai_prepare(). This patch do it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87wo65ssk2.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We have 2 type of component functions
snd_soc_dai_xxx() is focusing to dai itself,
snd_soc_pcm_dai_xxx() is focusing to rtd related dai.
Now we can update soc_dai_pcm_new() to
snd_soc_pcm_dai_new(). This patch do it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-By: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/87y2qlssk7.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
When I copied the function prototypes from the GPIO header file into
my own driver, checkpatch yelled at me saying that I shouldn't use use
"unsigned" but instead should say "unsigned int". Let's make the
header file use "unsigned int" so others who copy like I did won't get
yelled at.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200428172322.2.Iacb3c8152c3cf9015a91308678155a578b0cc050@changeid
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
The legacy defines GPIOF_DIR_XXX are only for consumers. Document the
proper ones. Also: don't use "_XXX" since that's harder to find with
"git grep". Just list both of the values.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200428172322.1.I396f351e364f3c09df7c7606e79abefb8682c092@changeid
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
It was not sufficiently clear how to create and use p_def.
Improve the documentation.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
gpiod_get_value() can return negative values if an error occurs.
In several places this error code was ignored.
Ensure that errors codes are handled correctly throughout the CEC
pin framework and CEC pin drivers.
The return code of the cec_pin_ops read() callback had to be changed
from 'bool' to 'int', which mean the prototype of that callback in the
sun4i drm driver also had to be changed.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
This converts the l4f00242t03 backlight driver to use GPIO
descriptors and switches the two Freescale i.MX boards over
to passing descriptors instead of global GPIO numbers.
We use the typical names "enable" and "reset" as found in
the device tree bindings for panel GPIOs.
This saves a lot of code in the driver and makes it possible
to get rid of the platform data header altogether.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Add all the clock ids for the audiomix clocks.
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Leon Romanovsky says:
====================
This is first part of series which tries to return some sanity to
mlx5_ib_create_qp() function. Such refactoring is required to make
extension of that function with less worries of breaking driver.
Extra goal of such refactoring is to ensure that QP is allocated at the
beginning of function and released at the end. It will allow us to move QP
allocation to be under IB/core responsibility.
====================
Based on the mlx5-next branch at
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Due to dependencies
* branch 'mlx5_ib_qp_refactor_1': (66 commits)
RDMA/mlx5: Process all vendor flags in one place
RDMA/mlx5: Return all configured create flags through query QP
RDMA/mlx5: Change scatter CQE flag to be set like other vendor flags
RDMA/mlx5: Use flags_en mechanism to mark QP created with WQE signature
RDMA/mlx5: Process create QP flags in one place
RDMA/mlx5: Delete create QP flags obfuscation
RDMA/mlx5: Initial separation of RAW_PACKET QP from common flow
RDMA/mlx5: Remove second copy from user for non RSS RAW QPs
RDMA/mlx5: Move DRIVER QP flags check into separate function
RDMA/mlx5: Update all DRIVER QP places to use QP subtype
RDMA/mlx5: Split scatter CQE configuration for DCT QP
RDMA/mlx5: Separate create QP flows to be based on type
RDMA/mlx5: Set QP subtype immediately when it is known
RDMA/mlx5: Avoid setting redundant NULL for XRC QPs
RDMA/mlx5: Prepare QP allocation for future removal
RDMA/mlx5: Perform check if QP creation flow is valid
RDMA/mlx5: Delete impossible GSI port check
RDMA/mlx5: Organize QP types checks in one place
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
|
|
Add ability to fetch bpf_link details through BPF_OBJ_GET_INFO_BY_FD command.
Also enhance show_fdinfo to potentially include bpf_link type-specific
information (similarly to obj_info).
Also introduce enum bpf_link_type stored in bpf_link itself and expose it in
UAPI. bpf_link_tracing also now will store and return bpf_attach_type.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200429001614.1544-5-andriin@fb.com
|
|
Add support to look up bpf_link by ID and iterate over all existing bpf_links
in the system. GET_FD_BY_ID code handles not-yet-ready bpf_link by checking
that its ID hasn't been set to non-zero value yet. Setting bpf_link's ID is
done as the very last step in finalizing bpf_link, together with installing
FD. This approach allows users of bpf_link in kernel code to not worry about
races between user-space and kernel code that hasn't finished attaching and
initializing bpf_link.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200429001614.1544-4-andriin@fb.com
|
|
Generate ID for each bpf_link using IDR, similarly to bpf_map and bpf_prog.
bpf_link creation, initialization, attachment, and exposing to user-space
through FD and ID is a complicated multi-step process, abstract it away
through bpf_link_primer and bpf_link_prime(), bpf_link_settle(), and
bpf_link_cleanup() internal API. They guarantee that until bpf_link is
properly attached, user-space won't be able to access partially-initialized
bpf_link either from FD or ID. All this allows to simplify bpf_link attachment
and error handling code.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200429001614.1544-3-andriin@fb.com
|
|
Make bpf_link update support more generic by making it into another
bpf_link_ops methods. This allows generic syscall handling code to be agnostic
to various conditionally compiled features (e.g., the case of
CONFIG_CGROUP_BPF). This also allows to keep link type-specific code to remain
static within respective code base. Refactor existing bpf_cgroup_link code and
take advantage of this.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200429001614.1544-2-andriin@fb.com
|
|
Audit the action of unregistering ebtables and x_tables.
See: https://github.com/linux-audit/audit-kernel/issues/44
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
After the introduction of exchange_tids has_group_leader_pid is
equivalent to thread_group_leader. After the last couple of cleanups
has_group_leader_pid has no more callers.
So remove the now unused and redundant has_group_leader_pid.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
NETFILTER_CFG record generation was inconsistent for x_tables and
ebtables configuration changes. The call was needlessly messy and there
were supporting records missing at times while they were produced when
not requested. Simplify the logging call into a new audit_log_nfcfg
call. Honour the audit_enabled setting while more consistently
recording information including supporting records by tidying up dummy
checks.
Add an op= field that indicates the operation being performed (register
or replace).
Here is the enhanced sample record:
type=NETFILTER_CFG msg=audit(1580905834.919:82970): table=filter family=2 entries=83 op=replace
Generate audit NETFILTER_CFG records on ebtables table registration.
Previously this was being done for x_tables registration and replacement
operations and ebtables table replacement only.
See: https://github.com/linux-audit/audit-kernel/issues/25
See: https://github.com/linux-audit/audit-kernel/issues/35
See: https://github.com/linux-audit/audit-kernel/issues/43
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
When the thread group leader changes during exec and the old leaders
thread is reaped proc_flush_pid will flush the dentries for the entire
process because the leader still has it's original pid.
Fix this by exchanging the pids in an rcu safe manner,
and wrapping the code to do that up in a helper exchange_tids.
When I removed switch_exec_pids and introduced this behavior
in d73d65293e3e ("[PATCH] pidhash: kill switch_exec_pids") there
really was nothing that cared as flushing happened with
the cached dentry and de_thread flushed both of them on exec.
This lack of fully exchanging pids became a problem a few months later
when I introduced 48e6484d4902 ("[PATCH] proc: Rewrite the proc dentry
flush on exit optimization"). Which overlooked the de_thread case
was no longer swapping pids, and I was looking up proc dentries
by task->pid.
The current behavior isn't properly a bug as everything in proc will
continue to work correctly just a little bit less efficiently. Fix
this just so there are no little surprise corner cases waiting to bite
people.
-- Oleg points out this could be an issue in next_tgid in proc where
has_group_leader_pid is called, and reording some of the assignments
should fix that.
-- Oleg points out this will break the 10 year old hack in __exit_signal.c
> /*
> * This can only happen if the caller is de_thread().
> * FIXME: this is the temporary hack, we should teach
> * posix-cpu-timers to handle this case correctly.
> */
> if (unlikely(has_group_leader_pid(tsk)))
> posix_cpu_timers_exit_group(tsk);
The code in next_tgid has been changed to use PIDTYPE_TGID,
and the posix cpu timers code has been fixed so it does not
need the 10 year old hack, so this should be safe to merge
now.
Link: https://lore.kernel.org/lkml/87h7x3ajll.fsf_-_@x220.int.ebiederm.org/
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Fixes: 48e6484d4902 ("[PATCH] proc: Rewrite the proc dentry flush on exit optimization").
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
|
|
Using the struct pid to refer to two tasks in de_thread was a clever
idea and ultimately too clever, as it has lead to proc_flush_task
being called inconsistently.
To support rectifying this add hlists_swap_heads_rcu. An hlist
primitive that just swaps the hlist heads of two lists. This is
exactly what is needed for exchanging the pids of two tasks.
Only consideration of correctness of the code has been given,
as the caller is expected to be a slowpath.
Link: https://lore.kernel.org/lkml/87mu6vajnq.fsf_-_@x220.int.ebiederm.org/
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
Add a new kfd ioctl to allocate queue GWS. Queue
GWS is released on queue destroy.
v2: re-introduce this API with the following fixes squashed in:
- drm/amdkfd: fix null pointer dereference on dev
- drm/amdkfd: Return proper error code for gws alloc API
- drm/amdkfd: Remove GPU ID in GWS queue creation
Signed-off-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Move from a per-CS secure flag (TMZ) to a per-IB
secure flag.
Signed-off-by: Luben Tuikov <luben.tuikov@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
