summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2019-06-24tpm: Abstract crypto agile event size calculationsMatthew Garrett
We need to calculate the size of crypto agile events in multiple locations, including in the EFI boot stub. The easiest way to do this is to put it in a header file as an inline and leave a wrapper to ensure we don't end up with multiple copies of it embedded in the existing code. Signed-off-by: Matthew Garrett <mjg59@google.com> Reviewed-by: Bartosz Szczepanek <bsz@semihalf.com> Tested-by: Bartosz Szczepanek <bsz@semihalf.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2019-06-24media: v4l2-subdev: Verify arguments in v4l2_subdev_call()Janusz Krzysztofik
Correctness of format type (try or active) and pad number parameters passed to subdevice operation callbacks is now verified only for IOCTL calls. However, those callbacks are also used by drivers, e.g., V4L2 host interfaces. Since both subdev_do_ioctl() and drivers are using v4l2_subdev_call() macro while calling subdevice operations, move those parameter checks from subdev_do_ioctl() to v4l2_subdev_call() so we can avoid taking care of those checks inside drivers. Define a wrapper function for each operation callback in scope, then gather those wrappers in a static v4l2_subdev_ops structure so the v4l2_subdev_call() macro can find them easy if provided. Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-24perf/cgroups: Don't rotate events for cgroups unnecessarilyIan Rogers
Currently perf_rotate_context assumes that if the context's nr_events != nr_active a rotation is necessary for perf event multiplexing. With cgroups, nr_events is the total count of events for all cgroups and nr_active will not include events in a cgroup other than the current task's. This makes rotation appear necessary for cgroups when it is not. Add a perf_event_context flag that is set when rotation is necessary. Clear the flag during sched_out and set it when a flexible sched_in fails due to resources. Signed-off-by: Ian Rogers <irogers@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Link: https://lkml.kernel.org/r/20190601082722.44543-1-irogers@google.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-06-24Merge tag 'v5.2-rc6' into perf/core, to refresh branchIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-06-24sched/uclamp: Extend sched_setattr() to support utilization clampingPatrick Bellasi
The SCHED_DEADLINE scheduling class provides an advanced and formal model to define tasks requirements that can translate into proper decisions for both task placements and frequencies selections. Other classes have a more simplified model based on the POSIX concept of priorities. Such a simple priority based model however does not allow to exploit most advanced features of the Linux scheduler like, for example, driving frequencies selection via the schedutil cpufreq governor. However, also for non SCHED_DEADLINE tasks, it's still interesting to define tasks properties to support scheduler decisions. Utilization clamping exposes to user-space a new set of per-task attributes the scheduler can use as hints about the expected/required utilization for a task. This allows to implement a "proactive" per-task frequency control policy, a more advanced policy than the current one based just on "passive" measured task utilization. For example, it's possible to boost interactive tasks (e.g. to get better performance) or cap background tasks (e.g. to be more energy/thermal efficient). Introduce a new API to set utilization clamping values for a specified task by extending sched_setattr(), a syscall which already allows to define task specific properties for different scheduling classes. A new pair of attributes allows to specify a minimum and maximum utilization the scheduler can consider for a task. Do that by validating the required clamp values before and then applying the required changes using _the_ same pattern already in use for __setscheduler(). This ensures that the task is re-enqueued with the new clamp values. Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alessio Balsini <balsini@android.com> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Joel Fernandes <joelaf@google.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Morten Rasmussen <morten.rasmussen@arm.com> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Perret <quentin.perret@arm.com> Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com> Cc: Steve Muckle <smuckle@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Todd Kjos <tkjos@google.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lkml.kernel.org/r/20190621084217.8167-7-patrick.bellasi@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-06-24sched/core: Allow sched_setattr() to use the current policyPatrick Bellasi
The sched_setattr() syscall mandates that a policy is always specified. This requires to always know which policy a task will have when attributes are configured and this makes it impossible to add more generic task attributes valid across different scheduling policies. Reading the policy before setting generic tasks attributes is racy since we cannot be sure it is not changed concurrently. Introduce the required support to change generic task attributes without affecting the current task policy. This is done by adding an attribute flag (SCHED_FLAG_KEEP_POLICY) to enforce the usage of the current policy. Add support for the SETPARAM_POLICY policy, which is already used by the sched_setparam() POSIX syscall, to the sched_setattr() non-POSIX syscall. Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alessio Balsini <balsini@android.com> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Joel Fernandes <joelaf@google.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Morten Rasmussen <morten.rasmussen@arm.com> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Perret <quentin.perret@arm.com> Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com> Cc: Steve Muckle <smuckle@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Todd Kjos <tkjos@google.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lkml.kernel.org/r/20190621084217.8167-6-patrick.bellasi@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-06-24sched/uclamp: Add system default clampsPatrick Bellasi
Tasks without a user-defined clamp value are considered not clamped and by default their utilization can have any value in the [0..SCHED_CAPACITY_SCALE] range. Tasks with a user-defined clamp value are allowed to request any value in that range, and the required clamp is unconditionally enforced. However, a "System Management Software" could be interested in limiting the range of clamp values allowed for all tasks. Add a privileged interface to define a system default configuration via: /proc/sys/kernel/sched_uclamp_util_{min,max} which works as an unconditional clamp range restriction for all tasks. With the default configuration, the full SCHED_CAPACITY_SCALE range of values is allowed for each clamp index. Otherwise, the task-specific clamp is capped by the corresponding system default value. Do that by tracking, for each task, the "effective" clamp value and bucket the task has been refcounted in at enqueue time. This allows to lazy aggregate "requested" and "system default" values at enqueue time and simplifies refcounting updates at dequeue time. The cached bucket ids are used to avoid (relatively) more expensive integer divisions every time a task is enqueued. An active flag is used to report when the "effective" value is valid and thus the task is actually refcounted in the corresponding rq's bucket. Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alessio Balsini <balsini@android.com> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Joel Fernandes <joelaf@google.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Morten Rasmussen <morten.rasmussen@arm.com> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Perret <quentin.perret@arm.com> Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com> Cc: Steve Muckle <smuckle@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Todd Kjos <tkjos@google.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lkml.kernel.org/r/20190621084217.8167-5-patrick.bellasi@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-06-24sched/uclamp: Add CPU's clamp buckets refcountingPatrick Bellasi
Utilization clamping allows to clamp the CPU's utilization within a [util_min, util_max] range, depending on the set of RUNNABLE tasks on that CPU. Each task references two "clamp buckets" defining its minimum and maximum (util_{min,max}) utilization "clamp values". A CPU's clamp bucket is active if there is at least one RUNNABLE tasks enqueued on that CPU and refcounting that bucket. When a task is {en,de}queued {on,from} a rq, the set of active clamp buckets on that CPU can change. If the set of active clamp buckets changes for a CPU a new "aggregated" clamp value is computed for that CPU. This is because each clamp bucket enforces a different utilization clamp value. Clamp values are always MAX aggregated for both util_min and util_max. This ensures that no task can affect the performance of other co-scheduled tasks which are more boosted (i.e. with higher util_min clamp) or less capped (i.e. with higher util_max clamp). A task has: task_struct::uclamp[clamp_id]::bucket_id to track the "bucket index" of the CPU's clamp bucket it refcounts while enqueued, for each clamp index (clamp_id). A runqueue has: rq::uclamp[clamp_id]::bucket[bucket_id].tasks to track how many RUNNABLE tasks on that CPU refcount each clamp bucket (bucket_id) of a clamp index (clamp_id). It also has a: rq::uclamp[clamp_id]::bucket[bucket_id].value to track the clamp value of each clamp bucket (bucket_id) of a clamp index (clamp_id). The rq::uclamp::bucket[clamp_id][] array is scanned every time it's needed to find a new MAX aggregated clamp value for a clamp_id. This operation is required only when it's dequeued the last task of a clamp bucket tracking the current MAX aggregated clamp value. In this case, the CPU is either entering IDLE or going to schedule a less boosted or more clamped task. The expected number of different clamp values configured at build time is small enough to fit the full unordered array into a single cache line, for configurations of up to 7 buckets. Add to struct rq the basic data structures required to refcount the number of RUNNABLE tasks for each clamp bucket. Add also the max aggregation required to update the rq's clamp value at each enqueue/dequeue event. Use a simple linear mapping of clamp values into clamp buckets. Pre-compute and cache bucket_id to avoid integer divisions at enqueue/dequeue time. Signed-off-by: Patrick Bellasi <patrick.bellasi@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alessio Balsini <balsini@android.com> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Joel Fernandes <joelaf@google.com> Cc: Juri Lelli <juri.lelli@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Morten Rasmussen <morten.rasmussen@arm.com> Cc: Paul Turner <pjt@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Perret <quentin.perret@arm.com> Cc: Rafael J . Wysocki <rafael.j.wysocki@intel.com> Cc: Steve Muckle <smuckle@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Todd Kjos <tkjos@google.com> Cc: Vincent Guittot <vincent.guittot@linaro.org> Cc: Viresh Kumar <viresh.kumar@linaro.org> Link: https://lkml.kernel.org/r/20190621084217.8167-2-patrick.bellasi@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-06-24sched/debug: Add sched_overutilized tracepointQais Yousef
The new tracepoint allows us to track the changes in overutilized status. Overutilized status is associated with EAS. It indicates that the system is in high performance state. EAS is disabled when the system is in this state since there's not much energy savings while high performance tasks are pushing the system to the limit and it's better to default to the spreading behavior of the scheduler. This tracepoint helps understanding and debugging the conditions under which this happens. Signed-off-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Pavankumar Kondeti <pkondeti@codeaurora.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Perret <quentin.perret@arm.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Uwe Kleine-Konig <u.kleine-koenig@pengutronix.de> Link: https://lkml.kernel.org/r/20190604111459.2862-6-qais.yousef@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-06-24sched/debug: Add new tracepoint to track PELT at se levelQais Yousef
The new tracepoint allows tracking PELT signals at sched_entity level. Which is supported in CFS tasks and taskgroups only. Signed-off-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Pavankumar Kondeti <pkondeti@codeaurora.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Perret <quentin.perret@arm.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Uwe Kleine-Konig <u.kleine-koenig@pengutronix.de> Link: https://lkml.kernel.org/r/20190604111459.2862-5-qais.yousef@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-06-24sched/debug: Add new tracepoints to track PELT at rq levelQais Yousef
The new tracepoints allow tracking PELT signals at rq level for all scheduling classes + irq. Signed-off-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Pavankumar Kondeti <pkondeti@codeaurora.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Perret <quentin.perret@arm.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Uwe Kleine-Konig <u.kleine-koenig@pengutronix.de> Link: https://lkml.kernel.org/r/20190604111459.2862-4-qais.yousef@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-06-24sched/debug: Add a new sched_trace_*() helper functionsQais Yousef
The new functions allow modules to access internal data structures of unexported struct cfs_rq and struct rq to extract important information from the tracepoints to be introduced in later patches. While at it fix alphabetical order of struct declarations in sched.h Signed-off-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Dietmar Eggemann <dietmar.eggemann@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Pavankumar Kondeti <pkondeti@codeaurora.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Perret <quentin.perret@arm.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Uwe Kleine-Konig <u.kleine-koenig@pengutronix.de> Link: https://lkml.kernel.org/r/20190604111459.2862-3-qais.yousef@arm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-06-24sched/topology: Remove unused 'sd' parameter from arch_scale_cpu_capacity()Vincent Guittot
The 'struct sched_domain *sd' parameter to arch_scale_cpu_capacity() is unused since commit: 765d0af19f5f ("sched/topology: Remove the ::smt_gain field from 'struct sched_domain'") Remove it. Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: gregkh@linuxfoundation.org Cc: linux@armlinux.org.uk Cc: quentin.perret@arm.com Cc: rafael@kernel.org Link: https://lkml.kernel.org/r/1560783617-5827-1-git-send-email-vincent.guittot@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-06-24Merge tag 'v5.2-rc6' into sched/core, to refresh the branchIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-06-24perf/x86: Disable extended registers for non-supported PMUsKan Liang
The perf fuzzer caused Skylake machine to crash: [ 9680.085831] Call Trace: [ 9680.088301] <IRQ> [ 9680.090363] perf_output_sample_regs+0x43/0xa0 [ 9680.094928] perf_output_sample+0x3aa/0x7a0 [ 9680.099181] perf_event_output_forward+0x53/0x80 [ 9680.103917] __perf_event_overflow+0x52/0xf0 [ 9680.108266] ? perf_trace_run_bpf_submit+0xc0/0xc0 [ 9680.113108] perf_swevent_hrtimer+0xe2/0x150 [ 9680.117475] ? check_preempt_wakeup+0x181/0x230 [ 9680.122091] ? check_preempt_curr+0x62/0x90 [ 9680.126361] ? ttwu_do_wakeup+0x19/0x140 [ 9680.130355] ? try_to_wake_up+0x54/0x460 [ 9680.134366] ? reweight_entity+0x15b/0x1a0 [ 9680.138559] ? __queue_work+0x103/0x3f0 [ 9680.142472] ? update_dl_rq_load_avg+0x1cd/0x270 [ 9680.147194] ? timerqueue_del+0x1e/0x40 [ 9680.151092] ? __remove_hrtimer+0x35/0x70 [ 9680.155191] __hrtimer_run_queues+0x100/0x280 [ 9680.159658] hrtimer_interrupt+0x100/0x220 [ 9680.163835] smp_apic_timer_interrupt+0x6a/0x140 [ 9680.168555] apic_timer_interrupt+0xf/0x20 [ 9680.172756] </IRQ> The XMM registers can only be collected by PEBS hardware events on the platforms with PEBS baseline support, e.g. Icelake, not software/probe events. Add capabilities flag PERF_PMU_CAP_EXTENDED_REGS to indicate the PMU which support extended registers. For X86, the extended registers are XMM registers. Add has_extended_regs() to check if extended registers are applied. The generic code define the mask of extended registers as 0 if arch headers haven't overridden it. Originally-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reported-by: Vince Weaver <vincent.weaver@maine.edu> Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 878068ea270e ("perf/x86: Support outputting XMM registers") Link: https://lkml.kernel.org/r/1559081314-9714-1-git-send-email-kan.liang@linux.intel.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-06-24ipv6: Dump route exceptions if requestedStefano Brivio
Since commit 2b760fcf5cfb ("ipv6: hook up exception table to store dst cache"), route exceptions reside in a separate hash table, and won't be found by walking the FIB, so they won't be dumped to userspace on a RTM_GETROUTE message. This causes 'ip -6 route list cache' and 'ip -6 route flush cache' to have no function anymore: # ip -6 route get fc00:3::1 fc00:3::1 via fc00:1::2 dev veth_A-R1 src fc00:1::1 metric 1024 expires 539sec mtu 1400 pref medium # ip -6 route get fc00:4::1 fc00:4::1 via fc00:2::2 dev veth_A-R2 src fc00:2::1 metric 1024 expires 536sec mtu 1500 pref medium # ip -6 route list cache # ip -6 route flush cache # ip -6 route get fc00:3::1 fc00:3::1 via fc00:1::2 dev veth_A-R1 src fc00:1::1 metric 1024 expires 520sec mtu 1400 pref medium # ip -6 route get fc00:4::1 fc00:4::1 via fc00:2::2 dev veth_A-R2 src fc00:2::1 metric 1024 expires 519sec mtu 1500 pref medium because iproute2 lists cached routes using RTM_GETROUTE, and flushes them by listing all the routes, and deleting them with RTM_DELROUTE one by one. If cached routes are requested using the RTM_F_CLONED flag together with strict checking, or if no strict checking is requested (and hence we can't consistently apply filters), look up exceptions in the hash table associated with the current fib6_info in rt6_dump_route(), and, if present and not expired, add them to the dump. We might be unable to dump all the entries for a given node in a single message, so keep track of how many entries were handled for the current node in fib6_walker, and skip that amount in case we start from the same partially dumped node. When a partial dump restarts, as the starting node might change when 'sernum' changes, we have no guarantee that we need to skip the same amount of in-node entries. Therefore, we need two counters, and we need to zero the in-node counter if the node from which the dump is resumed differs. Note that, with the current version of iproute2, this only fixes the 'ip -6 route list cache': on a flush command, iproute2 doesn't pass RTM_F_CLONED and, due to this inconsistency, 'ip -6 route flush cache' is still unable to fetch the routes to be flushed. This will be addressed in a patch for iproute2. To flush cached routes, a procfs entry could be introduced instead: that's how it works for IPv4. We already have a rt6_flush_exception() function ready to be wired to it. However, this would not solve the issue for listing. Versions of iproute2 and kernel tested: iproute2 kernel 4.14.0 4.15.0 4.19.0 5.0.0 5.1.0 5.1.0, patched 3.18 list + + + + + + flush + + + + + + 4.4 list + + + + + + flush + + + + + + 4.9 list + + + + + + flush + + + + + + 4.14 list + + + + + + flush + + + + + + 4.15 list flush 4.19 list flush 5.0 list flush 5.1 list flush with list + + + + + + fix flush + + + + v7: - Explain usage of "skip" counters in commit message (suggested by David Ahern) v6: - Rebase onto net-next, use recently introduced nexthop walker - Make rt6_nh_dump_exceptions() a separate function (suggested by David Ahern) v5: - Use dump_routes and dump_exceptions from filter, ignore NLM_F_MATCH, update test results (flushing works with iproute2 < 5.0.0 now) v4: - Split NLM_F_MATCH and strict check handling in separate patches - Filter routes using RTM_F_CLONED: if it's not set, only return non-cached routes, and if it's set, only return cached routes: change requested by David Ahern and Martin Lau. This implies that iproute2 needs a separate patch to be able to flush IPv6 cached routes. This is not ideal because we can't fix the breakage caused by 2b760fcf5cfb entirely in kernel. However, two years have passed since then, and this makes it more tolerable v3: - More descriptive comment about expired exceptions in rt6_dump_route() - Swap return values of rt6_dump_route() (suggested by Martin Lau) - Don't zero skip_in_node in case we don't dump anything in a given pass (also suggested by Martin Lau) - Remove check on RTM_F_CLONED altogether: in the current UAPI semantic, it's just a flag to indicate the route was cloned, not to filter on routes v2: Add tracking of number of entries to be skipped in current node after a partial dump. As we restart from the same node, if not all the exceptions for a given node fit in a single message, the dump will not terminate, as suggested by Martin Lau. This is a concrete possibility, setting up a big number of exceptions for the same route actually causes the issue, suggested by David Ahern. Reported-by: Jianlin Shi <jishi@redhat.com> Fixes: 2b760fcf5cfb ("ipv6: hook up exception table to store dst cache") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-24ipv4: Dump route exceptions if requestedStefano Brivio
Since commit 4895c771c7f0 ("ipv4: Add FIB nexthop exceptions."), cached exception routes are stored as a separate entity, so they are not dumped on a FIB dump, even if the RTM_F_CLONED flag is passed. This implies that the command 'ip route list cache' doesn't return any result anymore. If the RTM_F_CLONED is passed, and strict checking requested, retrieve nexthop exception routes and dump them. If no strict checking is requested, filtering can't be performed consistently: dump everything in that case. With this, we need to add an argument to the netlink callback in order to track how many entries were already dumped for the last leaf included in a partial netlink dump. A single additional argument is sufficient, even if we traverse logically nested structures (nexthop objects, hash table buckets, bucket chains): it doesn't matter if we stop in the middle of any of those, because they are always traversed the same way. As an example, s_i values in [], s_fa values in (): node (fa) #1 [1] nexthop #1 bucket #1 -> #0 in chain (1) bucket #2 -> #0 in chain (2) -> #1 in chain (3) -> #2 in chain (4) bucket #3 -> #0 in chain (5) -> #1 in chain (6) nexthop #2 bucket #1 -> #0 in chain (7) -> #1 in chain (8) bucket #2 -> #0 in chain (9) -- node (fa) #2 [2] nexthop #1 bucket #1 -> #0 in chain (1) -> #1 in chain (2) bucket #2 -> #0 in chain (3) it doesn't matter if we stop at (3), (4), (7) for "node #1", or at (2) for "node #2": walking flattens all that. It would even be possible to drop the distinction between the in-tree (s_i) and in-node (s_fa) counter, but a further improvement might advise against this. This is only as accurate as the existing tracking mechanism for leaves: if a partial dump is restarted after exceptions are removed or expired, we might skip some non-dumped entries. To improve this, we could attach a 'sernum' attribute (similar to the one used for IPv6) to nexthop entities, and bump this counter whenever exceptions change: having a distinction between the two counters would make this more convenient. Listing of exception routes (modified routes pre-3.5) was tested against these versions of kernel and iproute2: iproute2 kernel 4.14.0 4.15.0 4.19.0 5.0.0 5.1.0 3.5-rc4 + + + + + 4.4 4.9 4.14 4.15 4.19 5.0 5.1 fixed + + + + + v7: - Move loop over nexthop objects to route.c, and pass struct fib_info and table ID to it, not a struct fib_alias (suggested by David Ahern) - While at it, note that the NULL check on fa->fa_info is redundant, and the check on RTNH_F_DEAD is also not consistent with what's done with regular route listing: just keep it for nhc_flags - Rename entry point function for dumping exceptions to fib_dump_info_fnhe(), and rearrange arguments for consistency with fib_dump_info() - Rename fnhe_dump_buckets() to fnhe_dump_bucket() and make it handle one bucket at a time - Expand commit message to describe why we can have a single "skip" counter for all exceptions stored in bucket chains in nexthop objects (suggested by David Ahern) v6: - Rebased onto net-next - Loop over nexthop paths too. Move loop over fnhe buckets to route.c, avoids need to export rt_fill_info() and to touch exceptions from fib_trie.c. Pass NULL as flow to rt_fill_info(), it now allows that (suggested by David Ahern) Fixes: 4895c771c7f0 ("ipv4: Add FIB nexthop exceptions.") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-24fib_frontend, ip6_fib: Select routes or exceptions dump from RTM_F_CLONEDStefano Brivio
The following patches add back the ability to dump IPv4 and IPv6 exception routes, and we need to allow selection of regular routes or exceptions. Use RTM_F_CLONED as filter to decide whether to dump routes or exceptions: iproute2 passes it in dump requests (except for IPv6 cache flush requests, this will be fixed in iproute2) and this used to work as long as exceptions were stored directly in the FIB, for both IPv4 and IPv6. Caveat: if strict checking is not requested (that is, if the dump request doesn't go through ip_valid_fib_dump_req()), we can't filter on protocol, tables or route types. In this case, filtering on RTM_F_CLONED would be inconsistent: we would fix 'ip route list cache' by returning exception routes and at the same time introduce another bug in case another selector is present, e.g. on 'ip route list cache table main' we would return all exception routes, without filtering on tables. Keep this consistent by applying no filters at all, and dumping both routes and exceptions, if strict checking is not requested. iproute2 currently filters results anyway, and no unwanted results will be presented to the user. The kernel will just dump more data than needed. v7: No changes v6: Rebase onto net-next, no changes v5: New patch: add dump_routes and dump_exceptions flags in filter and simply clear the unwanted one if strict checking is enabled, don't ignore NLM_F_MATCH and don't set filter_set if NLM_F_MATCH is set. Skip filtering altogether if no strict checking is requested: selecting routes or exceptions only would be inconsistent with the fact we can't filter on tables. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-24regulator: s2mps11: Add support for disabling S2MPS11 regulators in suspendKrzysztof Kozlowski
The driver supported turning off regulators in suspend only for S2MPS14 device. However this makes also sense for S2MPS11 and can reduce the power consumption during suspend to RAM. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-06-24media: marvell-ccic: provide a clock for the sensorLubomir Rintel
The sensor needs the MCLK clock running when it's being probed. On platforms where the sensor is instantiated from a DT (MMP2) it is going to happen asynchronously. Therefore, the current modus operandi, where the bridge driver fiddles with the sensor power and clock itself is not going to fly. As the comments wisely note, this doesn't even belong there. Luckily, the ov7670 driver is already able to control its power and reset lines, we can just drop the MMP platform glue altogether. It also requests the clock via the standard clock subsystem. Good -- let's set up a clock instance so that the sensor can ask us to enable the clock. Note that this is pretty dumb at the moment: the clock is hardwired to a particular frequency and parent. It was always the case. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-24media: marvell-ccic: use async notifier to get the sensorLubomir Rintel
An instance of a sensor on DT-based MMP2 platform is always going to be created asynchronously. Let's move the manual device creation away from the core to the Cafe driver (used on OLPC XO-1, not present in DT) and set up appropriate async matches: I2C on Cafe, FWNODE on MMP (OLPC XO-1.75). Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-24media: marvell-ccic: drop unused stuffLubomir Rintel
Remove structure members and headers that are not actually used. Saves us from some noise in subsequent cleanup commits. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-06-24RDMA/mlx5: Remove unused IB_WR_REG_SIG_MR codeIsrael Rukshin
IB_WR_REG_SIG_MR is not needed after IB_WR_REG_MR_INTEGRITY was used. Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-24RDMA/rw: Use IB_WR_REG_MR_INTEGRITY for PI handoverIsrael Rukshin
Replace the old signature handover API with the new one. The new API simplifes PI handover code complexity for ULPs and improve performance. For RW API it will reduce the maximum number of work requests per task and the need of dealing with multiple MRs (and their registrations and invalidations) per task. All the mappings and registration of the data and the protection buffers is done by the LLD using a single WR and a special MR type (IB_MR_TYPE_INTEGRITY) for the PI handover operation. The setup of the tested benchmark (using iSER ULP): - 2 servers with 24 cores (1 initiator and 1 target) - ConnectX-4/ConnectX-5 adapters - 24 target sessions with 1 LUN each - ramdisk backstore - PI active Performance results running fio (24 jobs, 128 iodepth) using write_generate=1 and read_verify=1 (w/w.o patch): bs IOPS(read) IOPS(write) ---- ---------- ---------- 512 1243.3K/1182.3K 1725.1K/1680.2K 4k 571233/528835 743293/748259 32k 72388/71086 71789/93573 Using write_generate=0 and read_verify=0 (w/w.o patch): bs IOPS(read) IOPS(write) ---- ---------- ---------- 512 1572.1K/1427.2K 1823.5K/1724.3K 4k 921992/916194 753772/768267 32k 75052/73960 73180/95484 There is a performance degradation when writing big block sizes. Degradation is caused by the complexity of combining multiple indirections and perform RDMA READ operation from it. This will be fixed in the following patches by reducing the indirections if possible. Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-24RDMA/core: Validate integrity handover device capMax Gurtovoy
Protect the case that a ULP tries to allocate a QP with signature enabled flag while the LLD doesn't support this feature. While we're here, also move integrity_en attribute from mlx5_qp to ib_qp as a preparation for adding new integrity API to the rw-API (that is part of ib_core module). Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-24RDMA/core: Rename signature qp create flag and signature device capabilityIsrael Rukshin
Rename IB_QP_CREATE_SIGNATURE_EN to IB_QP_CREATE_INTEGRITY_EN and IB_DEVICE_SIGNATURE_HANDOVER to IB_DEVICE_INTEGRITY_HANDOVER. Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-24RDMA/core: Add an integrity MR pool supportIsrael Rukshin
This is a preparation for adding new signature API to the rw-API. Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-24RDMA/mlx5: Introduce and implement new IB_WR_REG_MR_INTEGRITY work requestMax Gurtovoy
This new WR will be used to perform PI (protection information) handover using the new API. Using the new API, the user will post a single WR that will internally perform all the needed actions to complete PI operation. This new WR will use a memory region that was allocated as IB_MR_TYPE_INTEGRITY and was mapped using ib_map_mr_sg_pi to perform the registration. In the old API, in order to perform a signature handover operation, each ULP should perform the following: 1. Map and register the data buffers. 2. Map and register the protection buffers. 3. Post a special reg WR to configure the signature handover operation layout. 4. Invalidate the signature memory key. 5. Invalidate protection buffers memory key. 6. Invalidate data buffers memory key. In the new API, the mapping of both data and protection buffers is performed using a single call to ib_map_mr_sg_pi function. Also the registration of the buffers and the configuration of the signature operation layout is done by a single new work request called IB_WR_REG_MR_INTEGRITY. This patch implements this operation for mlx5 devices that are capable to offload data integrity generation/validation while performing the actual buffer transfer. This patch will not remove the old signature API that is used by the iSER initiator and target drivers. This will be done in the future. In the internal implementation, for each IB_WR_REG_MR_INTEGRITY work request, we are using a single UMR operation to register both data and protection buffers using KLM's. Afterwards, another UMR operation will describe the strided block format. These will be followed by 2 SET_PSV operations to set the memory/wire domains initial signature parameters passed by the user. In the end of the whole transaction, only the signature memory key (the one that exposed for the RDMA operation) will be invalidated. Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-24RDMA/mlx5: Add attr for max number page list length for PI operationMax Gurtovoy
PI offload (protection information) is a feature that each RDMA provider can implement differently. Thus, introduce new device attribute to define the maximal length of the page list for PI fast registration operation. For example, mlx5 driver uses a single internal MR to map both data and protection SGL's, so it's equal to max_fast_reg_page_list_len / 2. Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-24RDMA/core: Add signature attrs element for ib_mr structureMax Gurtovoy
This element will describe the needed characteristics for the signature operation per signature enabled memory region (type IB_MR_TYPE_INTEGRITY). Also add meta_length attribute to ib_sig_attrs structure for saving the mapped metadata length (needed for the new API implementation). Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-24RDMA/core: Introduce ib_map_mr_sg_pi to map data/protection sgl'sMax Gurtovoy
This function will map the previously dma mapped SG lists for PI (protection information) and data to an appropriate memory region for future registration. The given MR must be allocated as IB_MR_TYPE_INTEGRITY. Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-24RDMA/core: Introduce IB_MR_TYPE_INTEGRITY and ib_alloc_mr_integrity APIIsrael Rukshin
This is a preparation for signature verbs API re-design. In the new design a single MR with IB_MR_TYPE_INTEGRITY type will be used to perform the needed mapping for data integrity operations. Signed-off-by: Israel Rukshin <israelr@mellanox.com> Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-24RDMA/core: Save the MR type in the ib_mr structureMax Gurtovoy
This is a preparation for the signature verbs API change. This change is needed since the MR type will define, in the upcoming patches, the need for allocating internal resources in LLD for signature handover related operations. It will also help to make sure that signature related functions are called with an appropriate MR type and fail otherwise. Also introduce new mr types IB_MR_TYPE_USER, IB_MR_TYPE_DMA and IB_MR_TYPE_DM for correctness. Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-24RDMA/core: Introduce new header file for signature operationsMax Gurtovoy
Ease the exhausted ib_verbs.h file and make the code more readable. Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Signed-off-by: Israel Rukshin <israelr@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2019-06-24net/tls: fix page double free on TX cleanupDirk van der Merwe
With commit 94850257cf0f ("tls: Fix tls_device handling of partial records") a new path was introduced to cleanup partial records during sk_proto_close. This path does not handle the SW KTLS tx_list cleanup. This is unnecessary though since the free_resources calls for both SW and offload paths will cleanup a partial record. The visible effect is the following warning, but this bug also causes a page double free. WARNING: CPU: 7 PID: 4000 at net/core/stream.c:206 sk_stream_kill_queues+0x103/0x110 RIP: 0010:sk_stream_kill_queues+0x103/0x110 RSP: 0018:ffffb6df87e07bd0 EFLAGS: 00010206 RAX: 0000000000000000 RBX: ffff8c21db4971c0 RCX: 0000000000000007 RDX: ffffffffffffffa0 RSI: 000000000000001d RDI: ffff8c21db497270 RBP: ffff8c21db497270 R08: ffff8c29f4748600 R09: 000000010020001a R10: ffffb6df87e07aa0 R11: ffffffff9a445600 R12: 0000000000000007 R13: 0000000000000000 R14: ffff8c21f03f2900 R15: ffff8c21f03b8df0 Call Trace: inet_csk_destroy_sock+0x55/0x100 tcp_close+0x25d/0x400 ? tcp_check_oom+0x120/0x120 tls_sk_proto_close+0x127/0x1c0 inet_release+0x3c/0x60 __sock_release+0x3d/0xb0 sock_close+0x11/0x20 __fput+0xd8/0x210 task_work_run+0x84/0xa0 do_exit+0x2dc/0xb90 ? release_sock+0x43/0x90 do_group_exit+0x3a/0xa0 get_signal+0x295/0x720 do_signal+0x36/0x610 ? SYSC_recvfrom+0x11d/0x130 exit_to_usermode_loop+0x69/0xb0 do_syscall_64+0x173/0x180 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x7fe9b9abc10d RSP: 002b:00007fe9b19a1d48 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca RAX: fffffffffffffe00 RBX: 0000000000000006 RCX: 00007fe9b9abc10d RDX: 0000000000000002 RSI: 0000000000000080 RDI: 00007fe948003430 RBP: 00007fe948003410 R08: 00007fe948003430 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00005603739d9080 R13: 00007fe9b9ab9f90 R14: 00007fe948003430 R15: 0000000000000000 Fixes: 94850257cf0f ("tls: Fix tls_device handling of partial records") Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-24io_uring: add support for sqe linksJens Axboe
With SQE links, we can create chains of dependent SQEs. One example would be queueing an SQE that's a read from one file descriptor, with the linked SQE being a write to another with the same set of buffers. An SQE link will not stall the pipeline, it'll just ensure that dependent SQEs aren't issued before the previous link has completed. Any error at submission or completion time will break the chain of SQEs. For completions, this also includes short reads or writes, as the next SQE could depend on the previous one being fully completed. Any SQE in a chain that gets canceled due to any of the above errors, will get an CQE fill with -ECANCELED as the error value. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2019-06-24Merge tag 'mtd/fixes-for-5.2-rc7' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull mtd fixes from Miquel Raynal: - Set the raw NAND number of targets to the right value - Fix a bug uncovered by a recent patch on Spansion SPI-NOR flashes * tag 'mtd/fixes-for-5.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: mtd: spi-nor: use 16-bit WRR command when QE is set on spansion flashes mtd: rawnand: initialize ntargets with maxchips
2019-06-24IMA: Define a new hook to measure the kexec boot command line argumentsPrakhar Srivastava
Currently during soft reboot(kexec_file_load) boot command line arguments are not measured. Define hooks needed to measure kexec command line arguments during soft reboot(kexec_file_load). - A new ima hook ima_kexec_cmdline is defined to be called by the kexec code. - A new function process_buffer_measurement is defined to measure the buffer hash into the IMA measurement list. - A new func policy KEXEC_CMDLINE is defined to control the measurement. Signed-off-by: Prakhar Srivastava <prsriva02@gmail.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2019-06-24module: allow arch overrides for .exit section namesMatthias Schiffer
Some archs like ARM store unwind information for .exit.text in sections with unusual names. As this unwind information refers to .exit.text, it must not be loaded when .exit.text is not loaded (when CONFIG_MODULE_UNLOAD is unset); otherwise, loading a module can fail due to relocation failures. Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Signed-off-by: Jessica Yu <jeyu@kernel.org>
2019-06-24Merge tag 'v5.2-rc6' into generic-dma-opsJoerg Roedel
Linux 5.2-rc6
2019-06-24drivers: Add generic helper to match by of_nodeSuzuki K Poulose
Add a helper to match device by the of_node. This will be later used to provide wrappers to the device iterators for {bus/class/driver}_find_device(). Convert other users to reuse this new helper. Cc: Alan Tull <atull@kernel.org> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: David Airlie <airlied@linux.ie> Cc: "David S. Miller" <davem@davemloft.net> Cc: devicetree@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Frank Rowand <frowand.list@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: Jiri Slaby <jslaby@suse.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: linux-fpga@vger.kernel.org Cc: linux-i2c@vger.kernel.org Cc: linux-spi@vger.kernel.org Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Mark Brown <broonie@kernel.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Maxime Ripard <maxime.ripard@bootlin.com> Cc: Moritz Fischer <mdf@kernel.org> Cc: Peter Rosin <peda@axentia.se> Cc: Rob Herring <robh+dt@kernel.org> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Thor Thayer <thor.thayer@linux.intel.com> Cc: Wolfram Sang <wsa@the-dreams.de> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Joe Perches <joe@perches.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-24driver_find_device: Unify the match function with class_find_device()Suzuki K Poulose
The driver_find_device() accepts a match function pointer to filter the devices for lookup, similar to bus/class_find_device(). However, there is a minor difference in the prototype for the match parameter for driver_find_device() with the now unified version accepted by {bus/class}_find_device(), where it doesn't accept a "const" qualifier for the data argument. This prevents us from reusing the generic match functions for driver_find_device(). For this reason, change the prototype of the driver_find_device() to make the "match" parameter in line with {bus/class}_find_device() and adjust its callers to use the const qualifier. Also, we could now promote the "data" parameter to const as we pass it down as a const parameter to the match functions. Cc: Corey Minyard <minyard@acm.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Will Deacon <will.deacon@arm.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Peter Oberparleiter <oberpar@linux.ibm.com> Cc: Sebastian Ott <sebott@linux.ibm.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Nehal Shah <nehal-bakulchandra.shah@amd.com> Cc: Shyam Sundar S K <shyam-sundar.s-k@amd.com> Cc: Lee Jones <lee.jones@linaro.org> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-24bus_find_device: Unify the match callback with class_find_deviceSuzuki K Poulose
There is an arbitrary difference between the prototypes of bus_find_device() and class_find_device() preventing their callers from passing the same pair of data and match() arguments to both of them, which is the const qualifier used in the prototype of class_find_device(). If that qualifier is also used in the bus_find_device() prototype, it will be possible to pass the same match() callback function to both bus_find_device() and class_find_device(), which will allow some optimizations to be made in order to avoid code duplication going forward. Also with that, constify the "data" parameter as it is passed as a const to the match function. For this reason, change the prototype of bus_find_device() to match the prototype of class_find_device() and adjust its callers to use the const qualifier in accordance with the new prototype of it. Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Andreas Noever <andreas.noever@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Corey Minyard <minyard@acm.org> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David Kershner <david.kershner@unisys.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: David Airlie <airlied@linux.ie> Cc: Felipe Balbi <balbi@kernel.org> Cc: Frank Rowand <frowand.list@gmail.com> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Harald Freudenberger <freude@linux.ibm.com> Cc: Hartmut Knaack <knaack.h@gmx.de> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jonathan Cameron <jic23@kernel.org> Cc: "James E.J. Bottomley" <jejb@linux.ibm.com> Cc: Len Brown <lenb@kernel.org> Cc: Mark Brown <broonie@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michael Jamet <michael.jamet@intel.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Peter Oberparleiter <oberpar@linux.ibm.com> Cc: Sebastian Ott <sebott@linux.ibm.com> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Yehezkel Bernat <YehezkelShB@gmail.com> Cc: rafael@kernel.org Acked-by: Corey Minyard <minyard@acm.org> Acked-by: David Kershner <david.kershner@unisys.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Acked-by: Wolfram Sang <wsa@the-dreams.de> # for the I2C parts Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-24mfd: Remove unused helper syscon_regmap_lookup_by_pdevnameSuzuki K Poulose
Nobody uses the exported helper syscon_regmap_lookup_by_pdevname, to lookup a device by name. Let us remove it. Suggested-by: Arnd Bergman <arnd@arnd.de> Cc: Arnd Bergman <arnd@arnd.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-24binfmt_flat: move the MAX_SHARED_LIBS definition to binfmt_flat.cChristoph Hellwig
MAX_SHARED_LIBS is an implementation detail of the kernel loader, and should be kept away from the file format definition. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2019-06-24binfmt_flat: remove the persistent argument from flat_get_addr_from_rpChristoph Hellwig
The argument is never used. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2019-06-24binfmt_flat: provide an asm-generic/flat.hChristoph Hellwig
This file implements the flat get/put reloc helpers for architectures that do not need to overload the relocs by simply using get_user/put_user. Note that many nommu architectures currently use {get,put}_unaligned, which looks a little bogus and should probably later be switched over to this version as well. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2019-06-24binfmt_flat: use fixed size type for the on-disk formatChristoph Hellwig
So far binfmt_flat has only been supported on 32-bit platforms, so the variable size of the fields didn't matter. But the upcoming RISC-V nommu port supports 64-bit CPUs, and we now have a conflict between the elf2flt creation tool that always uses 32-bit fields and the kernel that uses (unsigned) long field. Switch to the userspace view as the rest of the binfmt_flat format is completely architecture neutral, and binfmt_flat isn't the right binary format for huge executables to start with. While we're at it also ensure these fields are using __be types as they big endian and are byte swapped when loaded. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2019-06-24binfmt_flat: consolidate two version of flat_v2_reloc_tChristoph Hellwig
Two branches of the ifdef maze actually have the same content, so merge them. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
2019-06-24binfmt_flat: remove the unused OLD_FLAT_FLAG_RAM definitionChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>