| Age | Commit message (Collapse) | Author |
|---|
|
The CS35L54 and CS35L57 are Boosted Smart Amplifiers. The CS35L54 has
I2C/SPI control and I2S/TDM audio. The CS35L57 also has SoundWire
control and audio.
The hardware differences between L54, L56 and L57 do not affect the
driver control interface so they can all be handled by the same driver.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20240308135900.603192-2-rf@opensource.cirrus.com>
|
|
We only use the flag for this purpose, so rename it accordingly. This
further prevents various other use cases of it, keeping it clean and
consistent. Then we can also check it in one spot, when it's being
attempted recycled, and remove some dead code in io_kbuf_recycle_ring().
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Since commit 43a7206b0963 ("driver core: class: make class_register() take
a const *"), the driver core allows for struct class to be in read-only
memory, so move the rtc_class structure to be declared at build time
placing it into read-only memory, instead of having to be dynamically
allocated at boot time.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Link: https://lore.kernel.org/r/20240305-class_cleanup-abelloni-v1-1-944c026137c8@marliere.net
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Add netlink support for reading NH group hardware stats.
Stats collection is done through a new notifier,
NEXTHOP_EVENT_HW_STATS_REPORT_DELTA. Drivers that implement HW counters for
a given NH group are thereby asked to collect the stats and report back to
core by calling nh_grp_hw_stats_report_delta(). This is similar to what
netdevice L3 stats do.
Besides exposing number of packets that passed in the HW datapath, also
include information on whether any driver actually realizes the counters.
The core can tell based on whether it got any _report_delta() reports from
the drivers. This allows enabling the statistics at the group at any time,
with drivers opting into supporting them. This is also in line with what
netdevice L3 stats are doing.
So as not to waste time and space, tie the collection and reporting of HW
stats with a new op flag, NHA_OP_FLAG_DUMP_HW_STATS.
Co-developed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Kees Cook <keescook@chromium.org> # For the __counted_by bits
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add netlink support for enabling collection of HW statistics on nexthop
groups.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add hw_stats field to several notifier structures to communicate to the
drivers that HW statistics should be configured for nexthops within a given
group.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add netlink support for reading NH group stats.
This data is only for statistics of the traffic in the SW datapath. HW
nexthop group statistics will be added in the following patches.
Emission of the stats is keyed to a new op_stats flag to avoid cluttering
the netlink message with stats if the user doesn't need them:
NHA_OP_FLAG_DUMP_STATS.
Co-developed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add nexthop group entry stats to count the number of packets forwarded
via each nexthop in the group. The stats will be exposed to user space
for better data path observability in the next patch.
The per-CPU stats pointer is placed at the beginning of 'struct
nh_grp_entry', so that all the fields accessed for the data path reside
on the same cache line:
struct nh_grp_entry {
struct nexthop * nh; /* 0 8 */
struct nh_grp_entry_stats * stats; /* 8 8 */
u8 weight; /* 16 1 */
/* XXX 7 bytes hole, try to pack */
union {
struct {
atomic_t upper_bound; /* 24 4 */
} hthr; /* 24 4 */
struct {
struct list_head uw_nh_entry; /* 24 16 */
u16 count_buckets; /* 40 2 */
u16 wants_buckets; /* 42 2 */
} res; /* 24 24 */
}; /* 24 24 */
struct list_head nh_list; /* 48 16 */
/* --- cacheline 1 boundary (64 bytes) --- */
struct nexthop * nh_parent; /* 64 8 */
/* size: 72, cachelines: 2, members: 6 */
/* sum members: 65, holes: 1, sum holes: 7 */
/* last cacheline: 8 bytes */
};
Co-developed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In order to add per-nexthop statistics, but still not increase netlink
message size for consumers that do not care about them, there needs to be a
toggle through which the user indicates their desire to get the statistics.
To that end, add a new attribute, NHA_OP_FLAGS. The idea is to be able to
use the attribute for carrying of arbitrary operation-specific flags, i.e.
not make it specific for get / dump.
Add the new attribute to get and dump policies, but do not actually allow
any flags yet -- those will come later as the flags themselves are defined.
Add the necessary parsing code.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
It is useful to expose skb addr and sock addr to user in tracepoint
tcp_probe, so that we can get more information while monitoring
receiving of tcp data, by ebpf or other ways.
For example, we need to identify a packet by seq and end_seq when
calculate transmit latency between layer 2 and layer 4 by ebpf, but which is
not available in tcp_probe, so we can only use kprobe hooking
tcp_rcv_established to get them. But we can use tcp_probe directly if skb
addr and sock addr are available, which is more efficient.
Signed-off-by: fuyuanli <fuyuanli@didiglobal.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
softnet_data->time_squeeze is sometimes used as a proxy for
host overload or indication of scheduling problems. In practice
this statistic is very noisy and has hard to grasp units -
e.g. is 10 squeezes a second to be expected, or high?
Delaying network (NAPI) processing leads to drops on NIC queues
but also RTT bloat, impacting pacing and CA decisions.
Stalls are a little hard to detect on the Rx side, because
there may simply have not been any packets received in given
period of time. Packet timestamps help a little bit, but
again we don't know if packets are stale because we're
not keeping up or because someone (*cough* cgroups)
disabled IRQs for a long time.
We can, however, use Tx as a proxy for Rx stalls. Most drivers
use combined Rx+Tx NAPIs so if Tx gets starved so will Rx.
On the Tx side we know exactly when packets get queued,
and completed, so there is no uncertainty.
This patch adds stall checks to BQL. Why BQL? Because
it's a convenient place to add such checks, already
called by most drivers, and it has copious free space
in its structures (this patch adds no extra cache
references or dirtying to the fast path).
The algorithm takes one parameter - max delay AKA stall
threshold and increments a counter whenever NAPI got delayed
for at least that amount of time. It also records the length
of the longest stall.
To be precise every time NAPI has not polled for at least
stall thrs we check if there were any Tx packets queued
between last NAPI run and now - stall_thrs/2.
Unlike the classic Tx watchdog this mechanism does not
ignore stalls caused by Tx being disabled, or loss of link.
I don't think the check is worth the complexity, and
stall is a stall, whether due to host overload, flow
control, link down... doesn't matter much to the application.
We have been running this detector in production at Meta
for 2 years, with the threshold of 8ms. It's the lowest
value where false positives become rare. There's still
a constant stream of reported stalls (especially without
the ksoftirqd deferral patches reverted), those who like
their stall metrics to be 0 may prefer higher value.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Breno Leitao <leitao@debian.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
'x86/amd' and 'core' into next
|
|
Rx alloc failures are commonly counted by drivers.
Support reporting those via netdev-genl queue stats.
Acked-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Amritha Nambiar <amritha.nambiar@intel.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240306195509.1502746-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The ethtool-nl family does a good job exposing various protocol
related and IEEE/IETF statistics which used to get dumped under
ethtool -S, with creative names. Queue stats don't have a netlink
API, yet, and remain a lion's share of ethtool -S output for new
drivers. Not only is that bad because the names differ driver to
driver but it's also bug-prone. Intuitively drivers try to report
only the stats for active queues, but querying ethtool stats
involves multiple system calls, and the number of stats is
read separately from the stats themselves. Worse still when user
space asks for values of the stats, it doesn't inform the kernel
how big the buffer is. If number of stats increases in the meantime
kernel will overflow user buffer.
Add a netlink API for dumping queue stats. Queue information is
exposed via the netdev-genl family, so add the stats there.
Support per-queue and sum-for-device dumps. Latter will be useful
when subsequent patches add more interesting common stats than
just bytes and packets.
The API does not currently distinguish between HW and SW stats.
The expectation is that the source of the stats will either not
matter much (good packets) or be obvious (skb alloc errors).
Acked-by: Stanislav Fomichev <sdf@google.com>
Reviewed-by: Amritha Nambiar <amritha.nambiar@intel.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240306195509.1502746-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
rps_sock_flow_table and rps_cpu_mask are used in fast path.
Move them to net_hotdata for better cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-19-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Move RPS related structures and helpers from include/linux/netdevice.h
and include/net/sock.h to a new include file.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-18-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Use a 32bit hole in "struct net_offload" to store
the remaining 32bit secrets used by TCPv6 and UDPv6.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-17-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
"struct inet6_protocol" has a 32bit hole in 32bit arches.
Use it to store the 32bit secret used by UDP and TCP,
to increase cache locality in rx path.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-16-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
"struct net_protocol" has a 32bit hole in 32bit arches.
Use it to store the 32bit secret used by UDP and TCP,
to increase cache locality in rx path.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-15-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
These structures are read in rx path, move them to net_hotdata
for better cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-14-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
These structures are read in rx path, move them to net_hotdata
for better cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-13-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
These structures are used in GRO and GSO paths.
Move them to net_hodata for better cache locality.
v2: udpv6_offload definition depends on CONFIG_INET=y
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-12-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
skbuff_cache, skbuff_fclone_cache and skb_small_head_cache
are used in rx/tx fast paths.
Move them to net_hotdata for better cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-11-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
dev_rx_weight is read from process_backlog().
Move it to net_hotdata for better cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-10-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
dev_tx_weight is used in tx fast path.
Move it to net_hotdata for better cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-9-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
These are used in TCP fast paths.
Move them into net_hotdata for better cache locality.
v2: tcpv6_offload definition depends on CONFIG_INET
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-8-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
These structures are used in GRO and GSO paths.
v2: ipv6_packet_offload definition depends on CONFIG_INET
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-7-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
netdev_max_backlog is used in rx fat path.
Move it to net_hodata for better cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-6-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ptype_all is used in rx/tx fast paths.
Move it to net_hotdata for better cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
netdev_tstamp_prequeue is used in rx path.
Move it to net_hotdata for better cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
netdev_budget and netdev_budget are used in rx path (net_rx_action())
Move them into net_hotdata for better cache locality.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Instead of spreading networking critical fields
all over the places, add a custom net_hotdata
structure so that we can precisely control its layout.
In this first patch, move :
- gro_normal_batch used in rx (GRO stack)
- offload_base used in rx and tx (GRO and TSO stacks)
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240306160031.874438-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
David Howells says:
====================
Here are some changes to AF_RXRPC:
(1) Cache the transmission serial number of ACK and DATA packets in the
rxrpc_txbuf struct and log this in the retransmit tracepoint.
(2) Don't use atomics on rxrpc_txbuf::flags[*] and cache the intended wire
header flags there too to avoid duplication.
(3) Cache the wire checksum in rxrpc_txbuf to make it easier to create
jumbo packets in future (which will require altering the wire header
to a jumbo header and restoring it back again for retransmission).
(4) Fix the protocol names in the wire ACK trailer struct.
(5) Strip all the barriers and atomics out of the call timer tracking[*].
(6) Remove atomic handling from call->tx_transmitted and
call->acks_prev_seq[*].
(7) Don't bother resetting the DF flag after UDP packet transmission. To
change it, we now call directly into UDP code, so it's quick just to
set it every time.
(8) Merge together the DF/non-DF branches of the DATA transmission to
reduce duplication in the code.
(9) Add a kvec array into rxrpc_txbuf and start moving things over to it.
This paves the way for using page frags.
(10) Split (sub)packet preparation and timestamping out of the DATA
transmission function. This helps pave the way for future jumbo
packet generation.
(11) In rxkad, don't pick values out of the wire header stored in
rxrpc_txbuf, buf rather find them elsewhere so we can remove the wire
header from there.
(12) Move rxrpc_send_ACK() to output.c so that it can be merged with
rxrpc_send_ack_packet().
(13) Use rxrpc_txbuf::kvec[0] to access the wire header for the packet
rather than directly accessing the copy in rxrpc_txbuf. This will
allow that to be removed to a page frag.
(14) Switch from keeping the transmission buffers in rxrpc_txbuf allocated
in the slab to allocating them using page fragment allocators. There
are separate allocators for DATA packets (which persist for a while)
and control packets (which are discarded immediately).
We can then turn on MSG_SPLICE_PAGES when transmitting DATA and ACK
packets.
We can also get rid of the RCU cleanup on rxrpc_txbufs, preferring
instead to release the page frags as soon as possible.
(15) Parse received packets before handling timeouts as the former may
reset the latter.
(16) Make sure we don't retransmit DATA packets after all the packets have
been ACK'd.
(17) Differentiate traces for PING ACK transmission.
(18) Switch to keeping timeouts as ktime_t rather than a number of jiffies
as the latter is too coarse a granularity. Only set the call timer at
the end of the call event function from the aggregate of all the
timeouts, thereby reducing the number of timer calls made. In future,
it might be possible to reduce the number of timers from one per call
to one per I/O thread and to use a high-precision timer.
(19) Record RTT probes after successful transmission rather than recording
it before and then cancelling it after if unsuccessful[*]. This
allows a number of calls to get the current time to be removed.
(20) Clean up the resend algorithm as there's now no need to walk the
transmission buffer under lock[*]. DATA packets can be retransmitted
as soon as they're found rather than being queued up and transmitted
when the locked is dropped.
(21) When initially parsing a received ACK packet, extract some of the
fields from the ack info to the skbuff private data. This makes it
easier to do path MTU discovery in the future when the call to which a
PING RESPONSE ACK refers has been deallocated.
[*] Possible with the move of almost all code from softirq context to the
I/O thread.
Link: https://lore.kernel.org/r/20240301163807.385573-1-dhowells@redhat.com/ # v1
Link: https://lore.kernel.org/r/20240304084322.705539-1-dhowells@redhat.com/ # v2
* tag 'rxrpc-iothread-20240305' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: (21 commits)
rxrpc: Extract useful fields from a received ACK to skb priv data
rxrpc: Clean up the resend algorithm
rxrpc: Record probes after transmission and reduce number of time-gets
rxrpc: Use ktimes for call timeout tracking and set the timer lazily
rxrpc: Differentiate PING ACK transmission traces.
rxrpc: Don't permit resending after all Tx packets acked
rxrpc: Parse received packets before dealing with timeouts
rxrpc: Do zerocopy using MSG_SPLICE_PAGES and page frags
rxrpc: Use rxrpc_txbuf::kvec[0] instead of rxrpc_txbuf::wire
rxrpc: Move rxrpc_send_ACK() to output.c with rxrpc_send_ack_packet()
rxrpc: Don't pick values out of the wire header when setting up security
rxrpc: Split up the DATA packet transmission function
rxrpc: Add a kvec[] to the rxrpc_txbuf struct
rxrpc: Merge together DF/non-DF branches of data Tx function
rxrpc: Do lazy DF flag resetting
rxrpc: Remove atomic handling on some fields only used in I/O thread
rxrpc: Strip barriers and atomics off of timer tracking
rxrpc: Fix the names of the fields in the ACK trailer struct
rxrpc: Note cksum in txbuf
rxrpc: Convert rxrpc_txbuf::flags into a mask and don't use atomics
...
====================
Link: https://lore.kernel.org/r/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.pengutronix.de/git/lst/linux into drm-next
- various code cleanups
- enhancements for NPU and MRT support
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas Stach <l.stach@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/72a783cd98d60f6ebb43b90a6b453eea87224409.camel@pengutronix.de
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"6 hotfixes. 4 are cc:stable and the remainder pertain to post-6.7
issues or aren't considered to be needed in earlier kernel versions"
* tag 'mm-hotfixes-stable-2024-03-07-16-17' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
scripts/gdb/symbols: fix invalid escape sequence warning
mailmap: fix Kishon's email
init/Kconfig: lower GCC version check for -Warray-bounds
mm, mmap: fix vma_merge() case 7 with vma_ops->close
mm: userfaultfd: fix unexpected change to src_folio when UFFDIO_MOVE fails
mm, vmscan: prevent infinite loop for costly GFP_NOIO | __GFP_RETRY_MAYFAIL allocations
|
|
Subsequent patches introduce bpf_arena that imposes special alignment
requirements on address selection.
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/r/20240307031228.42896-4-alexei.starovoitov@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
A fwnode link between specific supplier-consumer fwnodes can be added
multiple times for multiple reasons. If that dependency doesn't exist,
deleting the fwnode link once doesn't guarantee that it won't get created
again.
So, add FWLINK_FLAG_IGNORE flag to mark a fwnode link as one that needs to
be completely ignored. Since a fwnode link's flags is an OR of all the
flags passed to all the fwnode_link_add() calls to create that specific
fwnode link, the FWLINK_FLAG_IGNORE flag is preserved and can be used to
mark a fwnode link as on that need to be completely ignored until it is
deleted.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Acked-by: "Rafael J. Wysocki" <rafael@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240305050458.1400667-3-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Allow the callers to set fwnode link flags when adding fwnode links.
Signed-off-by: Saravana Kannan <saravanak@google.com>
Acked-by: "Rafael J. Wysocki" <rafael@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240305050458.1400667-2-saravanak@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Update header inclusions to follow IWYU (Include What You Use)
principle.
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240301180138.271590-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The struct fwnode_operations defines one of the callback to return
enum dev_dma_attr. But this currently is defined in property.h.
Move it to the correct location.
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240301180138.271590-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A few APIs, i.e. fwnode_is_ancestor_of(), fwnode_get_next_parent_dev(),
and get_dev_from_fwnode(), that belong specifically to the fw_devlink APIs,
may be static, but they are not.
Resolve this mess by moving them to the driver/base/core where the all
users are being resided and make static.
No functional changes intended.
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240301180138.271590-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We do not use 'extern' keyword with functions. Remove the last one
mistakenly added to fwnode.h.
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Saravana Kannan <saravanak@google.com>
Acked-by: "Rafael J. Wysocki" <rafael@kernel.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240301180138.271590-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Define cleanup handler using facilities from linux/cleanup.h to simplify
error handling in code using firmware loader. This will allow writing code
like this:
int driver_update_firmware(...)
{
const struct firmware *fw_entry __free(firmware) = NULL;
int error;
...
error = request_firmware(&fw_entry, fw_name, dev);
if (error) {
dev_err(dev, "failed to request firmware %s: %d",
fw_name, error);
return error;
}
error = check_firmware_valid(fw_entry);
if (error)
return error;
guard(mutex)(&instance->lock);
error = use_firmware(instance, fw);
if (error)
return error;
return 0;
}
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Luis Chamberalin <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/ZaeQw7VXhnirX4pQ@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a UIO memtype specifically for sharing dma_alloc_coherent
memory with userspace, backed by dma_mmap_coherent.
This is mainly for the bnx2/bnx2x/bnx2i "cnic" interface, although there
are a few other uio drivers which map dma_alloc_coherent memory and will
be converted to use dma_mmap_coherent as well.
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Chris Leech <cleech@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240205200137.138302-1-cleech@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add CDX-MSI domain per CDX controller with gic-its domain as
a parent, to support MSI for CDX devices. CDX devices allocate
MSIs from the CDX domain. Also, introduce APIs to alloc and free
IRQs for CDX domain.
In CDX subsystem firmware is a controller for all devices and
their configuration. CDX bus controller sends all the write_msi_msg
commands to firmware running on RPU and the firmware interfaces with
actual devices to pass this information to devices
Since, CDX controller is the only way to communicate with the Firmware
for MSI write info, CDX domain per controller required in contrast to
having a CDX domain per device.
Co-developed-by: Nikhil Agarwal <nikhil.agarwal@amd.com>
Signed-off-by: Nikhil Agarwal <nikhil.agarwal@amd.com>
Co-developed-by: Abhijit Gangurde <abhijit.gangurde@amd.com>
Signed-off-by: Abhijit Gangurde <abhijit.gangurde@amd.com>
Signed-off-by: Nipun Gupta <nipun.gupta@amd.com>
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Nikhil Agarwal <nikhil.agarwal@amd.com>
Link: https://lore.kernel.org/r/20240226082816.100872-1-nipun.gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The functions below are only used within the context of
drivers/greybus/core.c, so move them all into core and drop their 'inline'
specifiers:
is_gb_host_device(), is_gb_module(), is_gb_interface(), is_gb_control(),
is_gb_bundle() and is_gb_svc().
Suggested-by: Alex Elder <elder@ieee.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Reviewed-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20240226-device_cleanup-greybus2-v1-1-5f7d1161e684@marliere.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch introduces a new API, tegra_xusb_padctl_get_port_number,
to the Tegra XUSB Pad Controller driver. This API is used to identify
the USB port that is associated with a given PHY.
The function takes a PHY pointer for either a USB2 PHY or USB3 PHY as input
and returns the corresponding port number. If the PHY pointer is invalid,
it returns -ENODEV.
Cc: stable@vger.kernel.org
Signed-off-by: Wayne Chang <waynec@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://lore.kernel.org/r/20240307030328.1487748-2-waynec@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Now that the driver core can properly handle constant struct bus_type,
move the dio_bus_type variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20240212-bus_cleanup-dio-v2-1-3b1ba4c0547d@marliere.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add zynqmp_pm_efuse_access API in the ZynqMP
firmware for read/write access of efuse memory.
Signed-off-by: Praveen Teja Kundanala <praveen.teja.kundanala@amd.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240224114516.86365-6-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Since commit d492cc2573a0 ("driver core: device.h: make struct
bus_type a const *"), the driver core can properly handle constant
struct bus_type, move the slimbus_bus variable to be a constant
structure as well, placing it into read-only memory which can not be
modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20240224114403.86230-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
