summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2017-04-28mac80211: separate encoding/bandwidth from flagsJohannes Berg
We currently use a lot of flags that are mutually incompatible, separate this out into actual encoding and bandwidth enum values. Much of this again done with spatch, with manual post-editing, mostly to add the switch statements and get rid of the conversions. @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_80MHZ +status->bw = RATE_INFO_BW_80 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_40MHZ +status->bw = RATE_INFO_BW_40 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_20MHZ +status->bw = RATE_INFO_BW_20 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_160MHZ +status->bw = RATE_INFO_BW_160 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_5MHZ +status->bw = RATE_INFO_BW_5 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_10MHZ +status->bw = RATE_INFO_BW_10 @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_VHT +status->encoding = RX_ENC_VHT @@ expression status; @@ -status->enc_flags |= RX_ENC_FLAG_HT +status->encoding = RX_ENC_HT @@ expression status; @@ -status.enc_flags |= RX_ENC_FLAG_VHT +status.encoding = RX_ENC_VHT @@ expression status; @@ -status.enc_flags |= RX_ENC_FLAG_HT +status.encoding = RX_ENC_HT @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_HT) +(status->encoding == RX_ENC_HT) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_VHT) +(status->encoding == RX_ENC_VHT) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_5MHZ) +(status->bw == RATE_INFO_BW_5) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_10MHZ) +(status->bw == RATE_INFO_BW_10) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_40MHZ) +(status->bw == RATE_INFO_BW_40) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_80MHZ) +(status->bw == RATE_INFO_BW_80) @@ expression status; @@ -(status->enc_flags & RX_ENC_FLAG_160MHZ) +(status->bw == RATE_INFO_BW_160) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-28mac80211: clean up rate encoding bits in RX statusJohannes Berg
In preparation for adding support for HE rates, clean up the driver report encoding for rate/bandwidth reporting on RX frames. Much of this patch was done with the following spatch: @@ expression status; @@ -status->flag & (RX_FLAG_HT | RX_FLAG_VHT) +status->enc_flags & (RX_ENC_FLAG_HT | RX_ENC_FLAG_VHT) @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_SHORTPRE +status->enc_flags op RX_ENC_FLAG_SHORTPRE @@ expression status; @@ -status->flag & RX_FLAG_SHORTPRE +status->enc_flags & RX_ENC_FLAG_SHORTPRE @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_HT +status->enc_flags op RX_ENC_FLAG_HT @@ expression status; @@ -status->flag & RX_FLAG_HT +status->enc_flags & RX_ENC_FLAG_HT @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_40MHZ +status->enc_flags op RX_ENC_FLAG_40MHZ @@ expression status; @@ -status->flag & RX_FLAG_40MHZ +status->enc_flags & RX_ENC_FLAG_40MHZ @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_SHORT_GI +status->enc_flags op RX_ENC_FLAG_SHORT_GI @@ expression status; @@ -status->flag & RX_FLAG_SHORT_GI +status->enc_flags & RX_ENC_FLAG_SHORT_GI @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_HT_GF +status->enc_flags op RX_ENC_FLAG_HT_GF @@ expression status; @@ -status->flag & RX_FLAG_HT_GF +status->enc_flags & RX_ENC_FLAG_HT_GF @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_VHT +status->enc_flags op RX_ENC_FLAG_VHT @@ expression status; @@ -status->flag & RX_FLAG_VHT +status->enc_flags & RX_ENC_FLAG_VHT @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_STBC_MASK +status->enc_flags op RX_ENC_FLAG_STBC_MASK @@ expression status; @@ -status->flag & RX_FLAG_STBC_MASK +status->enc_flags & RX_ENC_FLAG_STBC_MASK @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_LDPC +status->enc_flags op RX_ENC_FLAG_LDPC @@ expression status; @@ -status->flag & RX_FLAG_LDPC +status->enc_flags & RX_ENC_FLAG_LDPC @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_10MHZ +status->enc_flags op RX_ENC_FLAG_10MHZ @@ expression status; @@ -status->flag & RX_FLAG_10MHZ +status->enc_flags & RX_ENC_FLAG_10MHZ @@ assignment operator op; expression status; @@ -status->flag op RX_FLAG_5MHZ +status->enc_flags op RX_ENC_FLAG_5MHZ @@ expression status; @@ -status->flag & RX_FLAG_5MHZ +status->enc_flags & RX_ENC_FLAG_5MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_80MHZ +status->enc_flags op RX_ENC_FLAG_80MHZ @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_80MHZ +status->enc_flags & RX_ENC_FLAG_80MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_160MHZ +status->enc_flags op RX_ENC_FLAG_160MHZ @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_160MHZ +status->enc_flags & RX_ENC_FLAG_160MHZ @@ assignment operator op; expression status; @@ -status->vht_flag op RX_VHT_FLAG_BF +status->enc_flags op RX_ENC_FLAG_BF @@ expression status; @@ -status->vht_flag & RX_VHT_FLAG_BF +status->enc_flags & RX_ENC_FLAG_BF @@ assignment operator op; expression status, STBC; @@ -status->flag op STBC << RX_FLAG_STBC_SHIFT +status->enc_flags op STBC << RX_ENC_FLAG_STBC_SHIFT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_SHORTPRE +status.enc_flags op RX_ENC_FLAG_SHORTPRE @@ expression status; @@ -status.flag & RX_FLAG_SHORTPRE +status.enc_flags & RX_ENC_FLAG_SHORTPRE @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_HT +status.enc_flags op RX_ENC_FLAG_HT @@ expression status; @@ -status.flag & RX_FLAG_HT +status.enc_flags & RX_ENC_FLAG_HT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_40MHZ +status.enc_flags op RX_ENC_FLAG_40MHZ @@ expression status; @@ -status.flag & RX_FLAG_40MHZ +status.enc_flags & RX_ENC_FLAG_40MHZ @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_SHORT_GI +status.enc_flags op RX_ENC_FLAG_SHORT_GI @@ expression status; @@ -status.flag & RX_FLAG_SHORT_GI +status.enc_flags & RX_ENC_FLAG_SHORT_GI @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_HT_GF +status.enc_flags op RX_ENC_FLAG_HT_GF @@ expression status; @@ -status.flag & RX_FLAG_HT_GF +status.enc_flags & RX_ENC_FLAG_HT_GF @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_VHT +status.enc_flags op RX_ENC_FLAG_VHT @@ expression status; @@ -status.flag & RX_FLAG_VHT +status.enc_flags & RX_ENC_FLAG_VHT @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_STBC_MASK +status.enc_flags op RX_ENC_FLAG_STBC_MASK @@ expression status; @@ -status.flag & RX_FLAG_STBC_MASK +status.enc_flags & RX_ENC_FLAG_STBC_MASK @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_LDPC +status.enc_flags op RX_ENC_FLAG_LDPC @@ expression status; @@ -status.flag & RX_FLAG_LDPC +status.enc_flags & RX_ENC_FLAG_LDPC @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_10MHZ +status.enc_flags op RX_ENC_FLAG_10MHZ @@ expression status; @@ -status.flag & RX_FLAG_10MHZ +status.enc_flags & RX_ENC_FLAG_10MHZ @@ assignment operator op; expression status; @@ -status.flag op RX_FLAG_5MHZ +status.enc_flags op RX_ENC_FLAG_5MHZ @@ expression status; @@ -status.flag & RX_FLAG_5MHZ +status.enc_flags & RX_ENC_FLAG_5MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_80MHZ +status.enc_flags op RX_ENC_FLAG_80MHZ @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_80MHZ +status.enc_flags & RX_ENC_FLAG_80MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_160MHZ +status.enc_flags op RX_ENC_FLAG_160MHZ @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_160MHZ +status.enc_flags & RX_ENC_FLAG_160MHZ @@ assignment operator op; expression status; @@ -status.vht_flag op RX_VHT_FLAG_BF +status.enc_flags op RX_ENC_FLAG_BF @@ expression status; @@ -status.vht_flag & RX_VHT_FLAG_BF +status.enc_flags & RX_ENC_FLAG_BF @@ assignment operator op; expression status, STBC; @@ -status.flag op STBC << RX_FLAG_STBC_SHIFT +status.enc_flags op STBC << RX_ENC_FLAG_STBC_SHIFT @@ @@ -RX_FLAG_STBC_SHIFT +RX_ENC_FLAG_STBC_SHIFT Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-28pinctrl: mediatek: Add missing pinctrl bindings for mt7623Sean Wang
Add missing pinctrl binding these which would be used in devicetree related files. Signed-off-by: Sean Wang <sean.wang@mediatek.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-04-27dm: introduce enum dm_queue_mode to cleanup related codeBart Van Assche
Introduce an enumeration type for the queue mode. This patch does not change any functionality but makes the DM code easier to read. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2017-04-27bridge: add per-port broadcast flood flagMike Manning
Support for l2 multicast flood control was added in commit b6cb5ac8331b ("net: bridge: add per-port multicast flood flag"). It allows broadcast as it was introduced specifically for unknown multicast flood control. But as broadcast is a special case of multicast, this may also need to be disabled. For this purpose, introduce a flag to disable the flooding of received l2 broadcasts. This approach is backwards compatible and provides flexibility in filtering for the desired packet types. Cc: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: Mike Manning <mmanning@brocade.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-27net: update comment for netif_dormant() functionZhang Shengju
This patch updates the comment for netif_dormant() function to reflect the intended usage. Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-27Merge branch 'for_4.12/soc-pmdomain-p2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/drivers Pull "Keystone mangled URLs fixed" from Santosh Shilimkar * 'for_4.12/soc-pmdomain-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: soc: pm-domain: Fix the mangled urls
2017-04-27Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs fixes from Al Viro: - fix orangefs handling of faults on write() - I'd missed that one back when orangefs was going through review. - readdir counterpart of "9p: cope with bogus responses from server in p9_client_{read,write}" - server might be lying or broken, and we'd better not overrun the kmalloc'ed buffer we are copying the results into. - NFS O_DIRECT read/write can leave iov_iter advanced by too much; that's what had been causing iov_iter_pipe() warnings davej had been seeing. - statx_timestamp.tv_nsec type fix (s32 -> u32). That one really should go in before 4.11. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: uapi: change the type of struct statx_timestamp.tv_nsec to unsigned fix nfs O_DIRECT advancing iov_iter too much p9_client_readdir() fix orangefs_bufmap_copy_from_iovec(): fix EFAULT handling
2017-04-27rhashtable: Cap total number of entries to 2^31Herbert Xu
When max_size is not set or if it set to a sufficiently large value, the nelems counter can overflow. This would cause havoc with the automatic shrinking as it would then attempt to fit a huge number of entries into a tiny hash table. This patch fixes this by adding max_elems to struct rhashtable to cap the number of elements. This is set to 2^31 as nelems is not a precise count. This is sufficiently smaller than UINT_MAX that it should be safe. When max_size is set max_elems will be lowered to at most twice max_size as is the status quo. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-27Merge tag 'kvm-arm-for-v4.12' of ↵Paolo Bonzini
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/ARM Changes for v4.12. Changes include: - Using the common sysreg definitions between KVM and arm64 - Improved hyp-stub implementation with support for kexec and kdump on the 32-bit side - Proper PMU exception handling - Performance improvements of our GIC handling - Support for irqchip in userspace with in-kernel arch-timers and PMU support - A fix for a race condition in our PSCI code Conflicts: Documentation/virtual/kvm/api.txt include/uapi/linux/kvm.h
2017-04-27KVM: mark requests that need synchronizationPaolo Bonzini
kvm_make_all_requests() provides a synchronization that waits until all kicked VCPUs have acknowledged the kick. This is important for KVM_REQ_MMU_RELOAD as it prevents freeing while lockless paging is underway. This patch adds the synchronization property into all requests that are currently being used with kvm_make_all_requests() in order to preserve the current behavior and only introduce a new framework. Removing it from requests where it is not necessary is left for future patches. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-04-27KVM: return if kvm_vcpu_wake_up() did wake up the VCPURadim Krčmář
No need to kick a VCPU that we have just woken up. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-04-27KVM: add explicit barrier to kvm_vcpu_kickAndrew Jones
kvm_vcpu_kick() must issue a general memory barrier prior to reading vcpu->mode in order to ensure correctness of the mutual-exclusion memory barrier pattern used with vcpu->requests. While the cmpxchg called from kvm_vcpu_kick(): kvm_vcpu_kick kvm_arch_vcpu_should_kick kvm_vcpu_exiting_guest_mode cmpxchg implies general memory barriers before and after the operation, that implication is only valid when cmpxchg succeeds. We need an explicit barrier for when it fails, otherwise a VCPU thread on its entry path that reads zero for vcpu->requests does not exclude the possibility the requesting thread sees !IN_GUEST_MODE when it reads vcpu->mode. kvm_make_all_cpus_request already had a barrier, so we remove it, as now it would be redundant. Signed-off-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-04-27KVM: mark requests that do not need a wakeupRadim Krčmář
Some operations must ensure that the guest is not running with stale data, but if the guest is halted, then the update can wait until another event happens. kvm_make_all_requests() currently doesn't wake up, so we can mark all requests used with it. First 8 bits were arbitrarily reserved for request numbers. Most uses of requests have the request type as a constant, so a compiler will optimize the '&'. An alternative would be to have an inline function that would return whether the request needs a wake-up or not, but I like this one better even though it might produce worse assembly. Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-04-27KVM: add kvm_{test,clear}_request to replace {test,clear}_bitRadim Krčmář
Users were expected to use kvm_check_request() for testing and clearing, but request have expanded their use since then and some users want to only test or do a faster clear. Make sure that requests are not directly accessed with bit operations. Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-04-27mfd: axp20x: Support AXP803 variantIcenowy Zheng
AXP803 is a new PMIC chip produced by X-Powers, usually paired with A64 via RSB bus. The PMIC itself is like AXP288, but with RSB support and dedicated VBUS and ACIN. Add support for it in the axp20x mfd driver. Currently only power key function is supported. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-04-27iommu: Move report_iommu_fault() to iommu.cJoerg Roedel
The function is in no fast-path, there is no need for it to be static inline in a header file. This also removes the need to include iommu trace-points in iommu.h. Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-04-27iommu: Include device.h in iommu.hJoerg Roedel
We make use of 'struct device' in iommu.h, so include device.h to make it available explicitly. Re-order the other headers while at it. Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-04-27fs: add a VALID_OPEN_FLAGSChristoph Hellwig
Add a central define for all valid open flags, and use it in the uniqueness check. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-04-27mfd: exynos-lpass: Remove pad retention controlMarek Szyprowski
Pad retention should be controlled from pin control driver, so remove it from Exynos LPASS driver. After this change, no more access to PMU regmap is needed, so remove also the code for handling PMU regmap. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Rob Herring <robh@kernel.org> Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-04-27mfd: Add support for DA9061Steve Twiss
MFD support for DA9061 is provided as part of the DA9062 device driver. The registers header file adds two new chip variant IDs defined in DA9061 and DA9062 hardware. The core header file adds new software enumerations for listing the valid DA9061 IRQs and a da9062_compatible_types enumeration for distinguishing between DA9061/62 devices in software. The core source code adds a new .compatible of_device_id entry. This is extended from DA9062 to support both "dlg,da9061" and "dlg,da9062". The .data entry now holds a reference to the enumerated device type. A new regmap_irq_chip model is added for DA9061 and this supports the new list of regmap_irq entries. A new mfd_cell da9061_devs[] array lists the new sub system components for DA9061. Support is added for a new DA9061 regmap_config which lists the correct readable, writable and volatile ranges for this chip. The probe function uses the device tree compatible string to switch on the da9062_compatible_types and configure the correct mfd cells, irq chip and regmap config. Kconfig is updated to reflect support for DA9061 and DA9062 PMICs. Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-04-27mfd: syscon: atmel-smc: Remove unused helpers/macrosBoris Brezillon
All macros prefixed with AT91[SAM9]_SMC have been replaced by equivalent definitions prefixed with ATMEL_SMC, and the at91sam9_smc_xxxx() helpers are no longer used. Drop these definitions before someone starts using them again. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-04-27mfd: syscon: atmel-smc: Add new helpers to ease SMC regs manipulationBoris Brezillon
These new helpers + macro definitions are meant to replace the old ones which are unpractical to use. Note that the macros and function prefixes have been intentionally changed to ATMEL_[H]SMC_XX and atmel_[h]smc_ to reflect the fact that this IP is also embedded in avr32 SoCs (and not only in at91 ones). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-04-27mfd: intel_soc_pmic_bxtwc: Rename header to follow c-fileAndy Shevchenko
For better understanding of relationship between headers and modules rename: intel_bxtwc.h -> intel_soc_pmic_bxtwc.h While here, remove file name from the file itself. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-04-27mfd: intel_soc_pmic_bxtwc: Move inclusion to c-fileAndy Shevchenko
There is no need to include intel_soc_pmic.h into header which doesn't require it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-04-27mfd: axp20x: Correct name of temperature data ADC registersQuentin Schulz
The registers 0x56 and 0x57 of AXP22X PMIC store the value of the internal temperature of the PMIC. This patch modifies the name of these registers from AXP22X_PMIC_ADC_H/L to AXP22X_PMIC_TEMP_H/L so their purpose is clearer. Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-04-27mfd: Add TI LMU driverMilo Kim
TI LMU (Lighting Management Unit) driver supports lighting devices below. LM3532, LM3631, LM3632, LM3633, LM3695 and LM3697. LMU devices have common features. - I2C interface for accessing device registers - Hardware enable pin control - Backlight brightness control - Notifier for hardware fault monitoring - Regulators for LCD display bias It contains fault monitor, backlight, LED and regulator driver. LMU fault monitor ----------------- LM3633 and LM3697 provide hardware monitoring feature. It enables open or short circuit detection. After monitoring is done, each device should be re-initialized. Notifier is used for this case. Separate patch for 'ti-lmu-fault-monitor' will be sent later. Backlight --------- It's handled by TI LMU backlight consolidated driver and chip dependent data. Separate patchset will be sent later. LED indicator ------------- LM3633 has 6 indicator LEDs. Programmable dimming pattern is also supported. Separate patch for 'leds-lm3633' will be sent later. Regulator --------- LM3631 has 5 regulators for the display bias. LM3632 supports 3 regulators. One consolidated driver enables it. The lm363x regulator driver is already upstreamed. Signed-off-by: Milo Kim <milo.kim@ti.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-04-27mfd: cros_ec: Add ACPI GPE handler for LID0 devicesArchana Patni
This patch installs an ACPI GPE handler for LID0 ACPI device to indicate ACPI core that this GPE should stay enabled for lid to work in suspend to idle path. Signed-off-by: Archana Patni <archana.patni@intel.com> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-04-27Merge branches 'ib-mfd-gpio-4.12', 'ib-mfd-iio-input-4.12', ↵Lee Jones
'ib-mfd-input-4.12', 'ib-mfd-leds-4.12', 'ib-mfd-phy-4.12' and 'ib-mfd-pinctrl-samsung-4.12' into ibs-for-mfd-merged
2017-04-26fs: remove _submit_bh()Eric Biggers
_submit_bh() allowed submitting a buffer_head for I/O using custom bio_flags. It used to be used by jbd to set BIO_SNAP_STABLE, introduced by commit 713685111774 ("mm: make snapshotting pages for stable writes a per-bio operation"). However, the code and flag has since been removed and no _submit_bh() users remain. These days, bio_flags are mostly used internally by the block layer to track the state of bio's. As such, it doesn't really make sense for filesystems to use them instead of op_flags when wanting special behavior for block requests. Therefore, remove _submit_bh() and trim the bio_flags argument from submit_bh_wbc(). Cc: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-04-26fs: constify tree_descr arrays passed to simple_fill_super()Eric Biggers
simple_fill_super() is passed an array of tree_descr structures which describe the files to create in the filesystem's root directory. Since these arrays are never modified intentionally, they should be 'const' so that they are placed in .rodata and benefit from memory protection. This patch updates the function signature and all users, and also constifies tree_descr.name. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-04-26fs: drop duplicate header percpu-rwsem.hGeliang Tang
Drop duplicate header percpu-rwsem.h from linux/fs.h. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-04-26fs/affs: import amigaffs.hFabian Frederick
Have that file in global include/linux is not needed. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-04-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-26uapi: change the type of struct statx_timestamp.tv_nsec to unsignedDmitry V. Levin
The comment asserting that the value of struct statx_timestamp.tv_nsec must be negative when statx_timestamp.tv_sec is negative, is wrong, as could be seen from the following example: #define _FILE_OFFSET_BITS 64 #include <assert.h> #include <fcntl.h> #include <stdio.h> #include <sys/stat.h> #include <unistd.h> #include <asm/unistd.h> #include <linux/stat.h> int main(void) { static const struct timespec ts[2] = { { .tv_nsec = UTIME_OMIT }, { .tv_sec = -2, .tv_nsec = 42 } }; assert(utimensat(AT_FDCWD, ".", ts, 0) == 0); struct stat st; assert(stat(".", &st) == 0); printf("st_mtim.tv_sec = %lld, st_mtim.tv_nsec = %lu\n", (long long) st.st_mtim.tv_sec, (unsigned long) st.st_mtim.tv_nsec); struct statx stx; assert(syscall(__NR_statx, AT_FDCWD, ".", 0, 0, &stx) == 0); printf("stx_mtime.tv_sec = %lld, stx_mtime.tv_nsec = %lu\n", (long long) stx.stx_mtime.tv_sec, (unsigned long) stx.stx_mtime.tv_nsec); return 0; } It expectedly prints: st_mtim.tv_sec = -2, st_mtim.tv_nsec = 42 stx_mtime.tv_sec = -2, stx_mtime.tv_nsec = 42 The more generic comment asserting that the value of struct statx_timestamp.tv_nsec might be negative is confusing to say the least. It contradicts both the struct stat.st_[acm]time_nsec tradition and struct timespec.tv_nsec requirements in utimensat syscall. If statx syscall ever returns a stx_[acm]time containing a negative tv_nsec that cannot be passed unmodified to utimensat syscall, it will cause an immense confusion. Fix this source of confusion by changing the type of struct statx_timestamp.tv_nsec from __s32 to __u32. Fixes: a528d35e8bfc ("statx: Add a system call to make enhanced file info available") Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Signed-off-by: David Howells <dhowells@redhat.com> cc: linux-api@vger.kernel.org cc: mtk.manpages@gmail.com Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2017-04-26x86, iommu/vt-d: Add an option to disable Intel IOMMU force onShaohua Li
IOMMU harms performance signficantly when we run very fast networking workloads. It's 40GB networking doing XDP test. Software overhead is almost unaware, but it's the IOTLB miss (based on our analysis) which kills the performance. We observed the same performance issue even with software passthrough (identity mapping), only the hardware passthrough survives. The pps with iommu (with software passthrough) is only about ~30% of that without it. This is a limitation in hardware based on our observation, so we'd like to disable the IOMMU force on, but we do want to use TBOOT and we can sacrifice the DMA security bought by IOMMU. I must admit I know nothing about TBOOT, but TBOOT guys (cc-ed) think not eabling IOMMU is totally ok. So introduce a new boot option to disable the force on. It's kind of silly we need to run into intel_iommu_init even without force on, but we need to disable TBOOT PMR registers. For system without the boot option, nothing is changed. Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-04-26ieee80211: fix kernel-doc parsing errorsJohannes Berg
Some of the enum definitions are unnamed but there's still an attempt at documenting them - that doesn't work. Name them to make that work. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-26ieee80211: add FT-802.1X AKM suite selectorLuca Coelho
Add the definition for FT-8021.1X AKM selector as defined in IEEE Std 802.11-2016, table 9-133. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-26ieee80211: add SUITE_B AKM selectorsLuca Coelho
Add the definitions for SUITE_B and SUITE_B_192 AKM selectors as defined in IEEE802.11REVmc_D5.0, table 9-132. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-26cfg80211: add request id parameter to .sched_scan_stop() signatureArend Van Spriel
For multiple scheduled scan support the driver needs to know which scheduled scan request is being stopped. Pass the request id in the .sched_scan_stop() callback. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-26nl80211: add support for BSSIDs in scheduled scan matchsetsArend Van Spriel
This patch allows for the scheduled scan request to specify matchsets for specific BSSIDs. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> [docs, netlink policy fix] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-26nl80211: allow multiple active scheduled scan requestsArend Van Spriel
This patch implements the idea to have multiple scheduled scan requests running concurrently. It mainly illustrates how to deal with the incoming request from user-space in terms of backward compatibility. In order to use multiple scheduled scans user-space needs to provide a flag attribute NL80211_ATTR_SCHED_SCAN_MULTI to indicate support. If not the request is treated as a legacy scan. Drivers currently supporting scheduled scan are now indicating they support a single scheduled scan request. This obsoletes WIPHY_FLAG_SUPPORTS_SCHED_SCAN. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> [clean up netlink destroy path to avoid allocations, code cleanups] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-26cfg80211: simplify netlink socket owner interface deletionJohannes Berg
There's no need to allocate a portid structure and then, for each of those, walk the interfaces - we can just add a flag to each interface and walk those directly. Due to padding in the struct, we can even do it without any memory cost, and it even simplifies the code. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-26blk-mq: Add blk_mq_ops.show_rq()Bart Van Assche
This new callback function will be used in the next patch to show more information about SCSI requests. Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Cc: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-04-26tcp: switch rcv_rtt_est and rcvq_space to high resolution timestampsEric Dumazet
Some devices or distributions use HZ=100 or HZ=250 TCP receive buffer autotuning has poor behavior caused by this choice. Since autotuning happens after 4 ms or 10 ms, short distance flows get their receive buffer tuned to a very high value, but after an initial period where it was frozen to (too small) initial value. With tp->tcp_mstamp introduction, we can switch to high resolution timestamps almost for free (at the expense of 8 additional bytes per TCP structure) Note that some TCP stacks use usec TCP timestamps where this patch makes even more sense : Many TCP flows have < 500 usec RTT. Hopefully this finer TS option can be standardized soon. Tested: HZ=100 kernel ./netperf -H lpaa24 -t TCP_RR -l 1000 -- -r 10000,10000 & Peer without patch : lpaa24:~# ss -tmi dst lpaa23 ... skmem:(r0,rb8388608,...) rcv_rtt:10 rcv_space:3210000 minrtt:0.017 Peer with the patch : lpaa23:~# ss -tmi dst lpaa24 ... skmem:(r0,rb428800,...) rcv_rtt:0.069 rcv_space:30000 minrtt:0.017 We can see saner RCVBUF, and more precise rcv_rtt information. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-26tcp: do not pass timestamp to tcp_rack_advance()Eric Dumazet
No longer needed, since tp->tcp_mstamp holds the information. This is needed to remove sack_state.ack_time in a following patch. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-26tcp: do not pass timestamp to tcp_rate_gen()Eric Dumazet
No longer needed, since tp->tcp_mstamp holds the information. This is needed to remove sack_state.ack_time in a following patch. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-26tcp: do not pass timestamp to tcp_rack_mark_lost()Eric Dumazet
This is no longer used, since tcp_rack_detect_loss() takes the timestamp from tp->tcp_mstamp Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-26tcp: add tp->tcp_mstamp fieldEric Dumazet
We want to use precise timestamps in TCP stack, but we do not want to call possibly expensive kernel time services too often. tp->tcp_mstamp is guaranteed to be updated once per incoming packet. We will use it in the following patches, removing specific skb_mstamp_get() calls, and removing ack_time from struct tcp_sacktag_state. Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-26rhashtable: remove insecure_max_entries paramFlorian Westphal
no users in the tree, insecure_max_entries is always set to ht->p.max_size * 2 in rhtashtable_init(). Replace only spot that uses it with a ht->p.max_size check. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-12 12:13:46 +0000