| Age | Commit message (Collapse) | Author |
|---|
|
into next/drivers
This pull request contains Broadcom ARM/ARM64/MIPS SoCs drivers changes
for 4.21, please pull the following changes:
- James fixes the firmware interface after a commit changed the use of
VLA and broke large transfers
- Stefan adds a timeout check for Raspberry Pi firmware transactions and
updates a bunch of SoC/firmware files to use SPDX tags
- Wolfram switches the GISB bus arbiter to use dev_get_drvdata()
- Yangtao provides a fix for a reference leak due to a call to
of_find_node_by_path()
- Florian fixes the CPU re-entry point out of S3 suspend with kernels
built in Thumb2 mode
* tag 'arm-soc/for-4.21/drivers' of https://github.com/Broadcom/stblinux:
soc: bcm: brcmstb: Don't leak device tree node reference
firmware: raspberrypi: Switch to SPDX identifier
firmware: raspberrypi: Fix firmware calls with large buffers
soc: bcm: Switch raspberrypi-power to SPDX identifier
firmware: raspberrypi: Define timeout for transactions
bus: brcmstb_gisb: simplify getting .driver_data
soc: bcm: brcmstb: Fix re-entry point with a THUMB2_KERNEL
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
The missing indentation on the "Return" sections for bpf_map_pop_elem()
and bpf_map_peek_elem() helpers break RST and man pages generation. This
patch fixes them, and moves the description of those two helpers towards
the end of the list (even though they are somehow related to the three
first helpers for maps, the man page explicitly states that the helpers
are sorted in chronological order).
While at it, bring other minor formatting edits for eBPF helpers
documentation: mostly blank lines removal, RST formatting, or other
small nits for consistency.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
The pkt_len field in qdisc_skb_cb stores the skb length as it will
appear on the wire after segmentation. For byte accounting, this value
is more accurate than skb->len. It is computed on entry to the TC
layer, so only valid there.
Allow read access to this field from BPF tc classifier and action
programs. The implementation is analogous to tc_classid, aside from
restricting to read access.
To distinguish it from skb->len and self-describe export as wire_len.
Changes v1->v2
- Rename pkt_len to wire_len
Signed-off-by: Petar Penkov <ppenkov@google.com>
Signed-off-by: Vlad Dumitrescu <vladum@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
|
|
When vb2_buffer_done is called the buffer is unbound from the
request and put. The media_request_object_put also 'put's the
request reference. If the application has already closed the
request fd, then that means that the request reference at that
point goes to 0 and the whole request is released.
This means that the control handler associated with the request is
also freed and that causes this kernel oops:
[174705.995401] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:908
[174705.995411] in_atomic(): 1, irqs_disabled(): 1, pid: 28071, name: vivid-000-vid-o
[174705.995416] 2 locks held by vivid-000-vid-o/28071:
[174705.995420] #0: 000000001ea3a232 (&dev->mutex#3){....}, at: vivid_thread_vid_out+0x3f5/0x550 [vivid]
[174705.995447] #1: 00000000e30a0d1e (&(&q->done_lock)->rlock){....}, at: vb2_buffer_done+0x92/0x1d0 [videobuf2_common]
[174705.995460] Preemption disabled at:
[174705.995461] [<0000000000000000>] (null)
[174705.995472] CPU: 11 PID: 28071 Comm: vivid-000-vid-o Tainted: G W 4.20.0-rc1-test-no #88
[174705.995476] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/19/2017
[174705.995481] Call Trace:
[174705.995500] dump_stack+0x46/0x60
[174705.995512] ___might_sleep.cold.79+0xe1/0xf1
[174705.995523] __mutex_lock+0x50/0x8f0
[174705.995531] ? find_held_lock+0x2d/0x90
[174705.995536] ? find_held_lock+0x2d/0x90
[174705.995542] ? find_held_lock+0x2d/0x90
[174705.995564] ? v4l2_ctrl_handler_free.part.13+0x44/0x1d0 [videodev]
[174705.995576] v4l2_ctrl_handler_free.part.13+0x44/0x1d0 [videodev]
[174705.995590] v4l2_ctrl_request_release+0x1c/0x30 [videodev]
[174705.995600] media_request_clean+0x64/0xe0 [media]
[174705.995609] media_request_release+0x19/0x40 [media]
[174705.995617] vb2_buffer_done+0xef/0x1d0 [videobuf2_common]
[174705.995630] vivid_thread_vid_out+0x2c1/0x550 [vivid]
[174705.995645] ? vivid_stop_generating_vid_cap+0x1c0/0x1c0 [vivid]
[174705.995653] kthread+0x113/0x130
[174705.995659] ? kthread_park+0x80/0x80
[174705.995667] ret_from_fork+0x35/0x40
The vb2_buffer_done function can be called from interrupt context, so
anything that sleeps is not allowed.
The solution is to increment the request refcount when the buffer is
queued and decrement it when the buffer is dequeued. Releasing the
request is fine if that happens from VIDIOC_DQBUF.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
Add ability to track allocated ib_ucontext, which are limited
resource and worth to be visible by users.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Besides current two users one more is coming. Definitely makes sense to
introduce a helper.
No functional change intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
|
|
i.MX7ULP Clock functions are under joint control of the System
Clock Generation (SCG) modules, Peripheral Clock Control (PCC)
modules, and Core Mode Controller (CMC)1 blocks
Note IMX7ULP has two clock domains: M4 and A7. This binding doc
is only for A7 clock domain.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Anson Huang <Anson.Huang@nxp.com>
Cc: Bai Ping <ping.bai@nxp.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Adding CLK_FRAC_DIVIDER_ZERO_BASED flag to indicate the numerator and
denominator value in register are start from 0.
This can be used to support frac dividers like below:
Divider output clock = Divider input clock x [(frac +1) / (div +1)]
where frac/div in register is:
000b - Divide by 1.
001b - Divide by 2.
010b - Divide by 3.
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Michael Turquette <mturquette@baylibre.com>
Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- Revert a dt-bindings patch whose driver didn't make for 4.20
- fix a kernel oops at vicodec driver
- fix a frame overflow at gspca with was causing regressions on some
cameras, making them to not work
- use the proper type for wait_queue head
- make media request API compatible with 32-bit userspace on 64-bit
kernel
- fix a regression on Kernel 4.19 at dvb-pll
- don't use SPDX headers yet for GFDL
* tag 'media/v4.20-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: mediactl docs: Fix licensing message
media: dvb-pll: don't re-validate tuner frequencies
media: dvb-pll: fix tuner frequency ranges
media: Revert "media: dt-bindings: Document the Rockchip VPU bindings"
media: gspca: fix frame overflow error
media: vicodec: fix memchr() kernel oops
media: cedrus: add action item to the TODO
media: media-request: Add compat ioctl
media: Use wait_queue_head_t for media_request
|
|
Adding new fourcc CNF4 for 4 bit-per-pixel packed depth confidence
information provided by Intel RealSense cameras. Every two consecutive
pixels are packed into a single byte.
Signed-off-by: Sergey Dorodnicov <sergey.dorodnicov@intel.com>
Signed-off-by: Evgeni Raikhel <evgeni.raikhel@intel.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
SPDX-License-Identifier is used for the Xilinx Video IP and
related drivers.
[Added drivers/media/platform/xilinx/Kconfig]
[Added drivers/media/platform/xilinx/Makefile]
[Added include/dt-bindings/media/xilinx-vip.h]
Signed-off-by: Dhaval Shah <dhaval23031987@gmail.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
This adds the binding for the i.MX8MQ Clock Controller Module.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add device tree bindings for Low Power Audio subsystem clock controller for
Qualcomm Technology Inc's SDM845 SoCs.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Add flags for Octal mode I/O data transfer
Required for the SPI controller which can do the data transfer (TX/RX)
on 8 data lines e.g. NXP FlexSPI controller.
SPI_TX_OCTAL: transmit with 8 wires
SPI_RX_OCTAL: receive with 8 wires
Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
All of the old arguments can be derived from the uverbs_attr_bundle
structure, so get rid of the redundant arguments. Most of the prior work
has been removing users of the arguments to allow this to be a simple
patch.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
This creates a consistent way to access the two core buffers across write
and write_ex handlers.
Remove the open coded ucore conversion in the write/ex compatibility
handlers.
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Extract of useful code from the timeline work. This provides a function
to return a stub or dummy fence which is always signaled.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Link: https://patchwork.freedesktop.org/patch/265248/
|
|
Let the passed in array be const (and thus placed in rodata) instead of
a mutable array of const pointers.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004143750.30880-1-jani.nikula@intel.com
|
|
Entry needed for ICL RVP w/ RT274
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Go over the scheduler source code and fix common typos
in comments - and a typo in an actual variable name.
No change in functionality intended.
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
vmbus_process_offer() mustn't call channel->sc_creation_callback()
directly for sub-channels, because sc_creation_callback() ->
vmbus_open() may never get the host's response to the
OPEN_CHANNEL message (the host may rescind a channel at any time,
e.g. in the case of hot removing a NIC), and vmbus_onoffer_rescind()
may not wake up the vmbus_open() as it's blocked due to a non-zero
vmbus_connection.offer_in_progress, and finally we have a deadlock.
The above is also true for primary channels, if the related device
drivers use sync probing mode by default.
And, usually the handling of primary channels and sub-channels can
depend on each other, so we should offload them to different
workqueues to avoid possible deadlock, e.g. in sync-probing mode,
NIC1's netvsc_subchan_work() can race with NIC2's netvsc_probe() ->
rtnl_lock(), and causes deadlock: the former gets the rtnl_lock
and waits for all the sub-channels to appear, but the latter
can't get the rtnl_lock and this blocks the handling of sub-channels.
The patch can fix the multiple-NIC deadlock described above for
v3.x kernels (e.g. RHEL 7.x) which don't support async-probing
of devices, and v4.4, v4.9, v4.14 and v4.18 which support async-probing
but don't enable async-probing for Hyper-V drivers (yet).
The patch can also fix the hang issue in sub-channel's handling described
above for all versions of kernels, including v4.19 and v4.20-rc4.
So actually the patch should be applied to all the existing kernels,
not only the kernels that have 8195b1396ec8.
Fixes: 8195b1396ec8 ("hv_netvsc: fix deadlock on hotplug")
Cc: stable@vger.kernel.org
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: K. Y. Srinivasan <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the staging fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the USB fixes into usb-next.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The OCC is a device embedded on a POWER processor that collects and
aggregates sensor data from the processor and system. The OCC can
provide the raw sensor data as well as perform thermal and power
management on the system.
This driver provides an atomic communications channel between a service
processor (e.g. a BMC) and the OCC. The driver is dependent on the FSI
SBEFIFO driver to get hardware access through the SBE to the OCC SRAM.
Commands are issued to the SBE to send or fetch data to the SRAM.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"Volume is a little higher than usual due to a set of gpio fixes for
Davinci platforms that's been around a while, still seemed appropriate
to not hold off until next merge window.
Besides that it's the usual mix of minor fixes, mostly corrections of
small stuff in device trees.
Major stability-related one is the removal of a regulator from DT on
Rock960, since DVFS caused undervoltage. I expect it'll be restored
once they figure out the underlying issue"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits)
MAINTAINERS: Remove unused Qualcomm SoC mailing list
ARM: davinci: dm644x: set the GPIO base to 0
ARM: davinci: da830: set the GPIO base to 0
ARM: davinci: dm355: set the GPIO base to 0
ARM: davinci: dm646x: set the GPIO base to 0
ARM: davinci: dm365: set the GPIO base to 0
ARM: davinci: da850: set the GPIO base to 0
gpio: davinci: restore a way to manually specify the GPIO base
ARM: davinci: dm644x: define gpio interrupts as separate resources
ARM: davinci: dm355: define gpio interrupts as separate resources
ARM: davinci: dm646x: define gpio interrupts as separate resources
ARM: davinci: dm365: define gpio interrupts as separate resources
ARM: davinci: da8xx: define gpio interrupts as separate resources
ARM: dts: at91: sama5d2: use the divided clock for SMC
ARM: dts: imx51-zii-rdu1: Remove EEPROM node
ARM: dts: rockchip: Remove @0 from the veyron memory node
arm64: dts: rockchip: Fix PCIe reset polarity for rk3399-puma-haikou.
arm64: dts: qcom: msm8998: Reserve gpio ranges on MTP
arm64: dts: sdm845-mtp: Reserve reserved gpios
arm64: dts: ti: k3-am654: Fix wakeup_uart reg address
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- A revert of a previous commit as it is no longer necessary and has
shown to cause problems in some memory hotplug cases.
- Some small fixes and a minor cleanup.
- A patch for adding better diagnostic data in a very rare failure
case.
* tag 'for-linus-4.20a-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
pvcalls-front: fixes incorrect error handling
Revert "xen/balloon: Mark unallocated host memory as UNUSABLE"
xen: xlate_mmu: add missing header to fix 'W=1' warning
xen/x86: add diagnostic printout to xen_mc_flush() in case of error
x86/xen: cleanup includes in arch/x86/xen/spinlock.c
|
|
Add Mediatek CMDQ helper to create CMDQ packet and assemble GCE op code.
Signed-off-by: Houlong Wei <houlong.wei@mediatek.com>
Signed-off-by: HS Liao <hs.liao@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
|
|
If we retransmit an RPC request, we currently end up clobbering the
value of req->rq_rcv_buf.bvec that was allocated by the initial call to
xprt_request_prepare(req).
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
When allocating a new partition mtd subsystem runs internal tests in the
allocate_partition(). They may result in modifying specified flags (e.g.
dropping some /features/ like write access).
Those constraints don't have to be necessary true for subpartitions. It
may happen parent partition isn't block aligned (effectively disabling
write access) while subpartition may fit blocks nicely. In such case all
checks should be run again (starting with original flags value).
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
|
|
mtd_oobavail() returns either mtd->oovabail or mtd->oobsize. Both
values are unsigned 32-bit entities, so there is no reason to pretend
returning a signed one.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
|
|
'doc.2018.11.12a', 'fixes.2018.11.12a', 'initrd.2018.11.08b', 'sil.2018.11.12a' and 'srcu.2018.11.27a' into HEAD
bug.2018.11.12a: Get rid of BUG_ON() and friends
consolidate.2018.12.01a: Continued RCU flavor-consolidation cleanup
doc.2018.11.12a: Documentation updates
fixes.2018.11.12a: Miscellaneous fixes
initrd.2018.11.08b: Automate creation of rcutorture initrd
sil.2018.11.12a: Remove more spin_unlock_wait() calls
|
|
Now that call_rcu()'s callback is not invoked until after bh-disable and
preempt-disable regions of code have completed (in addition to explicitly
marked RCU read-side critical sections), call_rcu() can be used in place
of call_rcu_bh() and call_rcu_sched(). This commit therefore removes
these two API members from the callback_head structure's header comment.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
|
|
Now that synchronize_rcu() waits for preempt-disable regions of code
as well as RCU read-side critical sections, synchronize_sched() can be
replaced by synchronize_rcu(). This commit therefore makes this change,
even though it is but a comment.
Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Acked-by: Tejun Heo <tj@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull STIBP fallout fixes from Thomas Gleixner:
"The performance destruction department finally got it's act together
and came up with a cure for the STIPB regression:
- Provide a command line option to control the spectre v2 user space
mitigations. Default is either seccomp or prctl (if seccomp is
disabled in Kconfig). prctl allows mitigation opt-in, seccomp
enables the migitation for sandboxed processes.
- Rework the code to handle the conditional STIBP/IBPB control and
remove the now unused ptrace_may_access_sched() optimization
attempt
- Disable STIBP automatically when SMT is disabled
- Optimize the switch_to() logic to avoid MSR writes and invocations
of __switch_to_xtra().
- Make the asynchronous speculation TIF updates synchronous to
prevent stale mitigation state.
As a general cleanup this also makes retpoline directly depend on
compiler support and removes the 'minimal retpoline' option which just
pretended to provide some form of security while providing none"
* 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits)
x86/speculation: Provide IBPB always command line options
x86/speculation: Add seccomp Spectre v2 user space protection mode
x86/speculation: Enable prctl mode for spectre_v2_user
x86/speculation: Add prctl() control for indirect branch speculation
x86/speculation: Prepare arch_smt_update() for PRCTL mode
x86/speculation: Prevent stale SPEC_CTRL msr content
x86/speculation: Split out TIF update
ptrace: Remove unused ptrace_may_access_sched() and MODE_IBRS
x86/speculation: Prepare for conditional IBPB in switch_mm()
x86/speculation: Avoid __switch_to_xtra() calls
x86/process: Consolidate and simplify switch_to_xtra() code
x86/speculation: Prepare for per task indirect branch speculation control
x86/speculation: Add command line control for indirect branch speculation
x86/speculation: Unify conditional spectre v2 print functions
x86/speculataion: Mark command line parser data __initdata
x86/speculation: Mark string arrays const correctly
x86/speculation: Reorder the spec_v2 code
x86/l1tf: Show actual SMT state
x86/speculation: Rework SMT state change
sched/smt: Expose sched_smt_present static key
...
|
|
The arm64 codebase to implement coherent dma allocation for architectures
with non-coherent DMA is a good start for a generic implementation, given
that is uses the generic remap helpers, provides the atomic pool for
allocations that can't sleep and still is realtively simple and well
tested. Move it to kernel/dma and allow architectures to opt into it
using a config symbol. Architectures just need to provide a new
arch_dma_prep_coherent helper to writeback an invalidate the caches
for any memory that gets remapped for uncached access.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
|
|
Some architectures support remapping highmem into DMA coherent
allocations. To use the common code for them we need variants of
dma_direct_{alloc,free}_pages that do not use kernel virtual addresses.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
|
|
My main motivation of this commit is to clean up scripts/Kbuild.include
and scripts/Makefile.build.
Currently, CONFIG_TRIM_UNUSED_KSYMS works with a tricky gimmick;
possibly exported symbols are detected by letting $(CPP) replace
EXPORT_SYMBOL* with a special string '=== __KSYM_*===', which is
post-processed by sed, and passed to fixdep. The extra preprocessing
is costly, and hacking cmd_and_fixdep is ugly.
I came up with a new way to find exported symbols; insert a dummy
symbol __ksym_marker_* to each potentially exported symbol. Those
dummy symbols are picked up by $(NM), post-processed by sed, then
appended to .*.cmd files. I collected the post-process part to a
new shell script scripts/gen_ksymdeps.sh for readability. The dummy
symbols are put into the .discard.* section so that the linker
script rips them off the final vmlinux or modules.
A nice side-effect is building with CONFIG_TRIM_UNUSED_KSYMS will
be much faster.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Nicolas Pitre <nico@linaro.org>
|
|
This is a leftover from days where single-cpu systems were common:
Store last port used to resolve a clash to use it as a starting point when
the next conflict needs to be resolved.
When we have parallel attempt to connect to same address:port pair,
its likely that both cores end up computing the same "available" port,
as both use same starting port, and newly used ports won't become
visible to other cores until the conntrack gets confirmed later.
One of the cores then has to drop the packet at insertion time because
the chosen new tuple turns out to be in use after all.
Lets simplify this: remove port rover and use a pseudo-random starting
point.
Note that this doesn't make netfilter default to 'fully random' mode;
the 'rover' was only used if NAT could not reuse source port as-is.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
These are very very (for long time unused) caching infrastructure
definition, remove then. They have nothing to do with the NFC subsystem.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Often we want to write tests cases that check things like bad context
offset accesses. And one way to do this is to use an odd offset on,
for example, a 32-bit load.
This unfortunately triggers the alignment checks first on platforms
that do not set CONFIG_EFFICIENT_UNALIGNED_ACCESS. So the test
case see the alignment failure rather than what it was testing for.
It is often not completely possible to respect the original intention
of the test, or even test the same exact thing, while solving the
alignment issue.
Another option could have been to check the alignment after the
context and other validations are performed by the verifier, but
that is a non-trivial change to the verifier.
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Merge misc fixes from Andrew Morton:
"31 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (31 commits)
ocfs2: fix potential use after free
mm/khugepaged: fix the xas_create_range() error path
mm/khugepaged: collapse_shmem() do not crash on Compound
mm/khugepaged: collapse_shmem() without freezing new_page
mm/khugepaged: minor reorderings in collapse_shmem()
mm/khugepaged: collapse_shmem() remember to clear holes
mm/khugepaged: fix crashes due to misaccounted holes
mm/khugepaged: collapse_shmem() stop if punched or truncated
mm/huge_memory: fix lockdep complaint on 32-bit i_size_read()
mm/huge_memory: splitting set mapping+index before unfreeze
mm/huge_memory: rename freeze_page() to unmap_page()
initramfs: clean old path before creating a hardlink
kernel/kcov.c: mark funcs in __sanitizer_cov_trace_pc() as notrace
psi: make disabling/enabling easier for vendor kernels
proc: fixup map_files test on arm
debugobjects: avoid recursive calls with kmemleak
userfaultfd: shmem: UFFDIO_COPY: set the page dirty if VM_WRITE is not set
userfaultfd: shmem: add i_size checks
userfaultfd: shmem/hugetlbfs: only allow to register VM_MAYWRITE vmas
userfaultfd: shmem: allocate anonymous memory for MAP_PRIVATE shmem
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull fscache and cachefiles fixes from David Howells:
"Misc fixes:
- Fix an assertion failure at fs/cachefiles/xattr.c:138 caused by a
race between a cache object lookup failing and someone attempting
to reenable that object, thereby triggering an update of the
object's attributes.
- Fix an assertion failure at fs/fscache/operation.c:449 caused by a
split atomic subtract and atomic read that allows a race to happen.
- Fix a leak of backing pages when simultaneously reading the same
page from the same object from two or more threads.
- Fix a hang due to a race between a cache object being discarded and
the corresponding cookie being reenabled.
There are also some minor cleanups:
- Cast an enum value to a different enum type to prevent clang from
generating a warning. This shouldn't cause any sort of change in
the emitted code.
- Use ktime_get_real_seconds() instead of get_seconds(). This is just
used to uniquify a filename for an object to be placed in the
graveyard. Objects placed there are deleted by cachfilesd in
userspace immediately thereafter.
- Remove an initialised, but otherwise unused variable. This should
have been entirely optimised away anyway"
* tag 'fscache-fixes-20181130' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
fscache, cachefiles: remove redundant variable 'cache'
cachefiles: avoid deprecated get_seconds()
cachefiles: Explicitly cast enumerated type in put_object
fscache: fix race between enablement and dropping of object
cachefiles: Fix page leak in cachefiles_read_backing_file while vmscan is active
fscache: Fix race in fscache_op_complete() due to split atomic_sub & read
cachefiles: Fix an assertion failure when trying to update a failed object
|
|
Improve the wording around socket lookup for reuseport sockets, and
ensure that both bpf.h headers are in sync.
Signed-off-by: Joe Stringer <joe@wand.net.nz>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
David Ahern and Nicolas Dichtel report that the handling of the netns id
0 is incorrect for the BPF socket lookup helpers: rather than finding
the netns with id 0, it is resolving to the current netns. This renders
the netns_id 0 inaccessible.
To fix this, adjust the API for the netns to treat all negative s32
values as a lookup in the current netns (including u64 values which when
truncated to s32 become negative), while any values with a positive
value in the signed 32-bit integer space would result in a lookup for a
socket in the netns corresponding to that id. As before, if the netns
with that ID does not exist, no socket will be found. Any netns outside
of these ranges will fail to find a corresponding socket, as those
values are reserved for future usage.
Signed-off-by: Joe Stringer <joe@wand.net.nz>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Joey Pabalinas <joeypabalinas@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The userspace may need to control the carrier state.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: Didier Pallard <didier.pallard@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
the flowi* structures are used and memsetted by server functions
in critical path. Currently flowi_common has a couple of holes that
we can eliminate reordering the struct fields. As a side effect,
both flowi4 and flowi6 shrink by 8 bytes.
Before:
pahole -EC flowi_common
struct flowi_common {
// ...
/* size: 40, cachelines: 1, members: 10 */
/* sum members: 32, holes: 1, sum holes: 4 */
/* padding: 4 */
/* last cacheline: 40 bytes */
};
pahole -EC flowi6
struct flowi6 {
// ...
/* size: 88, cachelines: 2, members: 6 */
/* padding: 4 */
/* last cacheline: 24 bytes */
};
pahole -EC flowi4
struct flowi4 {
// ...
/* size: 56, cachelines: 1, members: 4 */
/* padding: 4 */
/* last cacheline: 56 bytes */
};
After:
struct flowi_common {
// ...
/* size: 32, cachelines: 1, members: 10 */
/* last cacheline: 32 bytes */
};
struct flowi6 {
// ...
/* size: 80, cachelines: 2, members: 6 */
/* padding: 4 */
/* last cacheline: 16 bytes */
};
struct flowi4 {
// ...
/* size: 48, cachelines: 1, members: 4 */
/* padding: 4 */
/* last cacheline: 48 bytes */
};
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, pointer offsets in three BPF context structures are
broken in two scenarios: i) 32 bit compiled applications running
on 64 bit kernels, and ii) LLVM compiled BPF programs running
on 32 bit kernels. The latter is due to BPF target machine being
strictly 64 bit. So in each of the cases the offsets will mismatch
in verifier when checking / rewriting context access. Fix this by
providing a helper macro __bpf_md_ptr() that will enforce padding
up to 64 bit and proper alignment, and for context access a macro
bpf_ctx_range_ptr() which will cover full 64 bit member range on
32 bit archs. For flow_keys, we additionally need to force the
size check to sizeof(__u64) as with other pointer types.
Fixes: d58e468b1112 ("flow_dissector: implements flow dissector BPF hook")
Fixes: 4f738adba30a ("bpf: create tcp_bpf_ulp allowing BPF to monitor socket TX/RX data")
Fixes: 2dbb9b9e6df6 ("bpf: Introduce BPF_PROG_TYPE_SK_REUSEPORT")
Reported-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: David S. Miller <davem@davemloft.net>
Tested-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
