| Age | Commit message (Collapse) | Author |
|---|
|
Following the description in previous patch (for TX):
As the bond interface is being bypassed by the TLS module, interacting
directly against the lower devs, there is no way for the bond interface
to disable its device offload capabilities, as long as the mode/policy
config allows it.
Hence, the feature flag is not directly controllable, but just reflects
the offload status based on the logic under bond_sk_check().
Here we just declare RX device offload support, and expose it via the
NETIF_F_HW_TLS_RX flag.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Boris Pismenny <borisp@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Implement TLS TX device offload for bonding interfaces.
This allows kTLS sockets running on a bond to benefit from the
device offload on capable lower devices.
To allow a simple and fast maintenance of the TLS context in SW and
lower devices, we bind the TLS socket to a specific lower dev.
To achieve a behavior similar to SW kTLS, we support only balance-xor
and 802.3ad modes, with xmit_hash_policy=layer3+4. This is enforced
in bond_sk_check(), done in a previous patch.
For the above configuration, the SW implementation keeps picking the
same exact lower dev for all the socket's SKBs. The device offload
behaves similarly, making the decision once at the connection creation.
Per socket, the TLS module should work directly with the lowest netdev
in chain, to call the tls_dev_ops operations.
As the bond interface is being bypassed by the TLS module, interacting
directly against the lower devs, there is no way for the bond interface
to disable its device offload capabilities, as long as the mode/policy
config allows it.
Hence, the feature flag is not directly controllable, but just reflects
the current offload status based on the logic under bond_sk_check().
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Boris Pismenny <borisp@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add ndo_sk_get_lower_dev() implementation for bond interfaces.
Support only for the cases where the socket's and SKBs' hash
yields identical value for the whole connection lifetime.
Here we restrict it to L3+4 sockets only, with
xmit_hash_policy==LAYER34 and bond modes xor/802.3ad.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Boris Pismenny <borisp@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ndo_sk_get_lower_dev returns the lower netdev that corresponds to
a given socket.
Additionally, we implement a helper netdev_sk_get_lowest_dev() to get
the lowest one in chain.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Boris Pismenny <borisp@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
tcf_action_init_1() loads tc action modules automatically with
request_module() after parsing the tc action names, and it drops RTNL
lock and re-holds it before and after request_module(). This causes a
lot of troubles, as discovered by syzbot, because we can be in the
middle of batch initializations when we create an array of tc actions.
One of the problem is deadlock:
CPU 0 CPU 1
rtnl_lock();
for (...) {
tcf_action_init_1();
-> rtnl_unlock();
-> request_module();
rtnl_lock();
for (...) {
tcf_action_init_1();
-> tcf_idr_check_alloc();
// Insert one action into idr,
// but it is not committed until
// tcf_idr_insert_many(), then drop
// the RTNL lock in the _next_
// iteration
-> rtnl_unlock();
-> rtnl_lock();
-> a_o->init();
-> tcf_idr_check_alloc();
// Now waiting for the same index
// to be committed
-> request_module();
-> rtnl_lock()
// Now waiting for RTNL lock
}
rtnl_unlock();
}
rtnl_unlock();
This is not easy to solve, we can move the request_module() before
this loop and pre-load all the modules we need for this netlink
message and then do the rest initializations. So the loop breaks down
to two now:
for (i = 1; i <= TCA_ACT_MAX_PRIO && tb[i]; i++) {
struct tc_action_ops *a_o;
a_o = tc_action_load_ops(name, tb[i]...);
ops[i - 1] = a_o;
}
for (i = 1; i <= TCA_ACT_MAX_PRIO && tb[i]; i++) {
act = tcf_action_init_1(ops[i - 1]...);
}
Although this looks serious, it only has been reported by syzbot, so it
seems hard to trigger this by humans. And given the size of this patch,
I'd suggest to make it to net-next and not to backport to stable.
This patch has been tested by syzbot and tested with tdc.py by me.
Fixes: 0fedc63fadf0 ("net_sched: commit action insertions together")
Reported-and-tested-by: syzbot+82752bc5331601cf4899@syzkaller.appspotmail.com
Reported-and-tested-by: syzbot+b3b63b6bff456bd95294@syzkaller.appspotmail.com
Reported-by: syzbot+ba67b12b1ca729912834@syzkaller.appspotmail.com
Cc: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Tested-by: Jamal Hadi Salim <jhs@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20210117005657.14810-1-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The TCP session does not terminate with TCP_USER_TIMEOUT when data
remain untransmitted due to zero window.
The number of unanswered zero-window probes (tcp_probes_out) is
reset to zero with incoming acks irrespective of the window size,
as described in tcp_probe_timer():
RFC 1122 4.2.2.17 requires the sender to stay open indefinitely
as long as the receiver continues to respond probes. We support
this by default and reset icsk_probes_out with incoming ACKs.
This counter, however, is the wrong one to be used in calculating the
duration that the window remains closed and data remain untransmitted.
Thanks to Jonathan Maxwell <jmaxwell37@gmail.com> for diagnosing the
actual issue.
In this patch a new timestamp is introduced for the socket in order to
track the elapsed time for the zero-window probes that have not been
answered with any non-zero window ack.
Fixes: 9721e709fa68 ("tcp: simplify window probe aborting on USER_TIMEOUT")
Reported-by: William McCall <william.mccall@gmail.com>
Co-developed-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Enke Chen <enchen@paloaltonetworks.com>
Reviewed-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20210115223058.GA39267@localhost.localdomain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Various fixes:
* kernel-doc parsing fixes
* incorrect debugfs string checks
* locking fix in regulatory
* some encryption-related fixes
* tag 'mac80211-for-net-2021-01-18.2' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211:
mac80211: check if atf has been disabled in __ieee80211_schedule_txq
mac80211: do not drop tx nulldata packets on encrypted links
mac80211: fix encryption key selection for 802.3 xmit
mac80211: fix fast-rx encryption check
mac80211: fix incorrect strlen of .write in debugfs
cfg80211: fix a kerneldoc markup
cfg80211: Save the regulatory domain with a lock
cfg80211/mac80211: fix kernel-doc for SAR APIs
====================
Link: https://lore.kernel.org/r/20210118204750.7243-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove a superfluous semicolon after function definition.
Signed-off-by: Yue Zou <zouyue3@huawei.com>
Link: https://lore.kernel.org/r/20210118010137.214378-1-zouyue3@huawei.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The bounded counter can't be reconfigured to be in auto mode, in attempt
to do it, the user will get an error, but without any hint why. Update
nldev interface to return an error message through extack mechanism.
Link: https://lore.kernel.org/r/20201230130240.180737-1-leon@kernel.org
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Since NVMe v1.4 the Controller Memory Buffer must be explicitly enabled
by the host.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
[hch: avoid a local variable and add a comment]
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
A SuperSpeed Plus device may operate at different speed and lane count
(i.e. gen2x2, gen1x2, or gen2x1). Introduce gadget ops
udc_set_ssp_rate() to set the desire corresponding usb_ssp_rate for
SuperSpeed Plus capable devices.
If the USB device supports different speeds at SuperSpeed Plus, set the
device to operate with the maximum number of lanes and speed.
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/9b85357cdadc02e3f0d653fd05f89eb46af836e1.1610592135.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A USB device controller operating in SuperSpeed Plus may support gen2x1,
gen1x2, and/or gen2x2. Introduce SuperSpeed Plus signaling rate
generation and lane count to usb_gadget with the fields ssp_rate and
max_ssp_rate. The gadget driver can use these to setup the device BOS
descriptor and select the desire operating speed and number of lanes.
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/b6d2196dcc3c73747f91abf9a082b20bbe276cc4.1610592135.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In preparation for USB 3.2 dual-lane support, add sublink speed
attribute macros and enum usb_ssp_rate. A USB device that operates in
SuperSpeed Plus may operate at different speed and lane count. These
additional macros and enum values help specifying that.
Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/ae9293ebd63a29f2a2035054753534d9eb123d74.1610592135.git.Thinh.Nguyen@synopsys.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch rejiggers the i2c-hid code so that the OF (Open Firmware
aka Device Tree) and ACPI support is separated out a bit. The OF and
ACPI drivers are now separate modules that wrap the core module.
Essentially, what we're doing here:
* Make "power up" and "power down" a function that can be (optionally)
implemented by a given user of the i2c-hid core.
* The OF and ACPI modules are drivers on their own, so they implement
probe / remove / suspend / resume / shutdown. The core code
provides implementations that OF and ACPI can call into.
We'll organize this so that we now have 3 modules: the old i2c-hid
module becomes the "core" module and two new modules will depend on
it, handling probing the specific device.
As part of this work, we'll remove the i2c-hid "platform data"
concept since it's not needed.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
|
|
IF_ENABLED(CONFIG_FOO, ptr) evaluates to (ptr) if CONFIG_FOO is set to 'y'
or 'm', NULL otherwise. The (ptr) argument must be a pointer.
The IF_ENABLED() macro can be very useful to help GCC drop dead code.
For instance, consider the following:
#ifdef CONFIG_FOO_SUSPEND
static int foo_suspend(struct device *dev)
{
...
}
#endif
static struct pm_ops foo_ops = {
#ifdef CONFIG_FOO_SUSPEND
.suspend = foo_suspend,
#endif
};
While this works, the foo_suspend() macro is compiled conditionally,
only when CONFIG_FOO_SUSPEND is set. This is problematic, as there could
be a build bug in this function, we wouldn't have a way to know unless
the config option is set.
An alternative is to declare foo_suspend() always, but mark it as maybe
unused:
static int __maybe_unused foo_suspend(struct device *dev)
{
...
}
static struct pm_ops foo_ops = {
#ifdef CONFIG_FOO_SUSPEND
.suspend = foo_suspend,
#endif
};
Again, this works, but the __maybe_unused attribute is required to
instruct the compiler that the function may not be referenced anywhere,
and is safe to remove without making a fuss about it. This makes the
programmer responsible for tagging the functions that can be
garbage-collected.
With this patch, it is now possible to write the following:
static int foo_suspend(struct device *dev)
{
...
}
static struct pm_ops foo_ops = {
.suspend = IF_ENABLED(CONFIG_FOO_SUSPEND, foo_suspend),
};
The foo_suspend() function will now be automatically dropped by the
compiler, and it does not require any specific attribute.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20201213235447.138271-1-paul@crapouillou.net
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
ACPICA commit 1a3a549286ea9db07d7ec700e7a70dd8bcc4354e
The macros to classify different AML exception codes are broken. For
instance,
ACPI_ENV_EXCEPTION(Status)
will always evaluate to zero due to
#define AE_CODE_ENVIRONMENTAL 0x0000
#define ACPI_ENV_EXCEPTION(Status) (Status & AE_CODE_ENVIRONMENTAL)
Similarly, ACPI_AML_EXCEPTION(Status) will evaluate to a non-zero
value for error codes of type AE_CODE_PROGRAMMER, AE_CODE_ACPI_TABLES,
as well as AE_CODE_AML, and not just AE_CODE_AML as the name suggests.
This commit fixes those checks.
Fixes: d46b6537f0ce ("ACPICA: AML Parser: ignore all exceptions resulting from incorrect AML during table load")
Link: https://github.com/acpica/acpica/commit/1a3a5492
Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
We have too many people abusing the struct page they can get at but
really shouldn't in importers. Aside from that the backing page might
simply not exist (for dynamic p2p mappings) looking at it and using it
e.g. for mmap can also wreak the page handling of the exporter
completely. Importers really must go through the proper interface like
dma_buf_mmap for everything.
I'm semi-tempted to enforce this for dynamic importers since those
really have no excuse at all to break the rules.
Unfortuantely we can't store the right pointers somewhere safe to make
sure we oops on something recognizable, so best is to just wrangle
them a bit by flipping all the bits. At least on x86 kernel addresses
have all their high bits sets and the struct page array is fairly low
in the kernel mapping, so flipping all the bits gives us a very high
pointer in userspace and hence excellent chances for an invalid
dereference.
v2: Add a note to the @map_dma_buf hook that exporters shouldn't do
fancy caching tricks, which would blow up with this address scrambling
trick here (Chris)
Enable by default when CONFIG_DMA_API_DEBUG is enabled.
v3: Only one copy of the mangle/unmangle code (Christian)
v4: #ifdef, not #if (0day)
v5: sg_table can also be an ERR_PTR (Chris, Christian)
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Stevens <stevensd@chromium.org>
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210115164739.3958206-1-daniel.vetter@ffwll.ch
|
|
ttm_resource_manager->use_type is only used for runtime changes by
vmwgfx. I think ideally we'd push this functionality into drivers -
ttm itself does not provide any locking to guarantee this is safe, so
the only way this can work at runtime is if the driver does provide
additional guarantees. vwmgfx does that through the
vmw_private->reservation_sem. Therefore supporting this feature in
shared code feels a bit misplaced.
As a first step add a WARN_ON to make sure the resource manager is
empty. This is just to make sure I actually understand correctly what
vmwgfx is doing, and to make sure an eventual subsequent refactor
doesn't break anything.
This check should also be useful for other drivers, to make sure they
haven't leaked anything.
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201211162942.3399050-3-daniel.vetter@ffwll.ch
|
|
Move some EFI related declarations that are only referenced on IA64 to
a new asm/efi.h arch header.
Cc: Tony Luck <tony.luck@intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Remove superfluous semicolons after function definitions.
Signed-off-by: Yue Zou <zouyue3@huawei.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210118010356.214491-1-zouyue3@huawei.com
|
|
Introduce a bitfield to allow the drivers to announce the available
features for an RTC.
The main use case would be to better handle alarms, that could be present
or not or have a minute resolution or may need a correct week day to be set.
Use the newly introduced RTC_FEATURE_ALARM bit to then test whether alarms
are available instead of relying on the presence of ops->set_alarm.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210110231752.1418816-2-alexandre.belloni@bootlin.com
|
|
similar to d_find_alias(inode), except that
* the caller must be holding rcu_read_lock()
* inode must not be freed until matching rcu_read_unlock()
* result is *NOT* pinned and can only be dereferenced until
the matching rcu_read_unlock().
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
qcom_vadc7_scale_hw_calib_die_temp() uses a table format different from
the rest of volt/temp conversion functions in this file. Also the
conversion functions results in non-monothonic values conversion, which
seems wrong.
Rewrite qcom_vadc7_scale_hw_calib_die_temp() to use
qcom_vadc_map_voltage_temp() directly, like the rest of conversion
functions do.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20201204025509.1075506-10-dmitry.baryshkov@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
struct vadc_map_pt is not used outside of qcom-vadc-common.c, so move it
there from the global header file.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20201204025509.1075506-9-dmitry.baryshkov@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
There might be cases when the IIO channel is attached to the device
subnode instead of being attached to the main device node. Allow drivers
to query IIO channels by using device tree nodes.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20201204025509.1075506-8-dmitry.baryshkov@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
qcom-vadc-common module will be used by ADC thermal monitoring driver,
so move it to global include dir.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20201204025509.1075506-6-dmitry.baryshkov@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Adds a function to interpolate against two points,
this is carried arount as a helper function by tons of drivers.
Signed-off-by: Craig Tatlor <ctatlor97@gmail.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20201204025509.1075506-3-dmitry.baryshkov@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
If the set definition contains stateful expressions, allocate them for
the newly added entries from the packet path.
Fixes: 65038428b2c6 ("netfilter: nf_tables: allow to specify stateful expression in set definition")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Following patch add support for flow based tunneling API
to send and recv GTP tunnel packet over tunnel metadata API.
This would allow this device integration with OVS or eBPF using
flow based tunneling APIs.
Signed-off-by: Pravin B Shelar <pbshelar@fb.com>
Link: https://lore.kernel.org/r/20210110070021.26822-1-pbshelar@fb.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Using devlink-sb, we can configure 12/16 (the important 75%) of the
switch's controlling watermarks for congestion drops, and we can monitor
50% of the watermark occupancies (we can monitor the reservation
watermarks, but not the sharing watermarks, which are exposed as pool
sizes).
The following definitions can be made:
SB_BUF=0 # The devlink-sb for frame buffers
SB_REF=1 # The devlink-sb for frame references
POOL_ING=0 # The pool for ingress traffic. Both devlink-sb instances
# have one of these.
POOL_EGR=1 # The pool for egress traffic. Both devlink-sb instances
# have one of these.
Editing the hardware watermarks is done in the following way:
BUF_xxxx_I is accessed when sb=$SB_BUF and pool=$POOL_ING
REF_xxxx_I is accessed when sb=$SB_REF and pool=$POOL_ING
BUF_xxxx_E is accessed when sb=$SB_BUF and pool=$POOL_EGR
REF_xxxx_E is accessed when sb=$SB_REF and pool=$POOL_EGR
Configuring the sharing watermarks for COL_SHR(dp=0) is done implicitly
by modifying the corresponding pool size. By default, the pool size has
maximum size, so this can be skipped.
devlink sb pool set pci/0000:00:00.5 sb $SB_BUF pool $POOL_ING \
size 129840 thtype static
Since by default there is no buffer reservation, the above command has
maxed out BUF_COL_SHR_I(dp=0).
Configuring the per-port reservation watermark (P_RSRV) is done in the
following way:
devlink sb port pool set pci/0000:00:00.5/0 sb $SB_BUF \
pool $POOL_ING th 1000
The above command sets BUF_P_RSRV_I(port 0) to 1000 bytes. After this
command, the sharing watermarks are internally reconfigured with 1000
bytes less, i.e. from 129840 bytes to 128840 bytes.
Configuring the per-port-tc reservation watermarks (Q_RSRV) is done in
the following way:
for tc in {0..7}; do
devlink sb tc bind set pci/0000:00:00.5/0 sb 0 tc $tc \
type ingress pool $POOL_ING \
th 3000
done
The above command sets BUF_Q_RSRV_I(port 0, tc 0..7) to 3000 bytes.
The sharing watermarks are again reconfigured with 24000 bytes less.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add devlink integration into the mscc_ocelot switchdev driver. All
physical ports (i.e. the unused ones as well) except the CPU port module
at ocelot->num_phys_ports are registered with devlink, and that requires
keeping the devlink_port structure outside struct ocelot_port_private,
since the latter has a 1:1 mapping with a struct net_device (which does
not exist for unused ports).
Since we use devlink_port_type_eth_set to link the devlink port to the
net_device, we can as well remove the .ndo_get_phys_port_name and
.ndo_get_port_parent_id implementations, since devlink takes care of
retrieving the port name and number automatically, once
.ndo_get_devlink_port is implemented.
Note that the felix DSA driver is already integrated with devlink by
default, since that is a thing that the DSA core takes care of. This is
the reason why these devlink stubs were put in ocelot_net.c and not in
the common library. It is also the reason why ocelot::devlink is a
pointer and not a full structure embedded inside struct ocelot: because
the mscc_ocelot driver allocates that by itself (as the container of
struct ocelot, in fact), but in the case of felix, it is DSA who
allocates the devlink, and felix just propagates the pointer towards
struct ocelot.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We should be moving anything that isn't DSA-specific or SoC-specific out
of the felix DSA driver, and into the common mscc_ocelot switch library.
The number of traffic classes is one of the aspects that is common
between all ocelot switches, so it belongs in the library.
This patch also makes seville use 8 TX queues, and therefore enables
prioritization via the QOS_CLASS field in the NPI injection header.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Switches that care about QoS might have hardware support for reserving
buffer pools for individual ports or traffic classes, and configuring
their sizes and thresholds. Through devlink-sb (shared buffers), this is
all configurable, as well as their occupancy being viewable.
Add the plumbing in DSA for these operations.
Individual drivers still need to call devlink_sb_register() with the
shared buffers they want to expose. A helper was not created in DSA for
this purpose (unlike, say, dsa_devlink_params_register), since in my
opinion it does not bring any benefit over plainly calling
devlink_sb_register() directly.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We'll need to read back the watermark thresholds and occupancy from
hardware (for devlink-sb integration), not only to write them as we did
so far in ocelot_port_set_maxlen. So introduce 2 new functions in struct
ocelot_ops, similar to wm_enc, and implement them for the 3 supported
mscc_ocelot switches.
Remove the INUSE and MAXUSE unpacking helpers for the QSYS_RES_STAT
register, because that doesn't scale with the number of switches that
mscc_ocelot supports now. They have different bit widths for the
watermarks, and we need function pointers to abstract that difference
away.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Instead of reading these values from the reference manual and writing
them down into the driver, it appears that the hardware gives us the
option of detecting them dynamically.
The number of frame references corresponds to what the reference manual
notes, however it seems that the frame buffers are reported as slightly
less than the books would indicate. On VSC9959 (Felix), the books say it
should have 128KB of packet buffer, but the registers indicate only
129840 bytes (126.79 KB). Also, the unit of measurement for FREECNT from
the documentation of all these devices is incorrect (taken from an older
generation). This was confirmed by Younes Leroul from Microchip support.
Not having anything better to do with these values at the moment* (this
will change soon), let's just print them.
*The frame buffer size is, in fact, used to calculate the tail dropping
watermarks.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix DM-raid's raid1 discard limits so discards work.
- Select missing Kconfig dependencies for DM integrity and zoned
targets.
- Four fixes for DM crypt target's support to optionally bypass kcryptd
workqueues.
- Fix DM snapshot merge supports missing data flushes before committing
metadata.
- Fix DM integrity data device flushing when external metadata is used.
- Fix DM integrity's maximum number of supported constructor arguments
that user can request when creating an integrity device.
- Eliminate DM core ioctl logging noise when an ioctl is issued without
required CAP_SYS_RAWIO permission.
* tag 'for-5.11/dm-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm crypt: defer decryption to a tasklet if interrupts disabled
dm integrity: fix the maximum number of arguments
dm crypt: do not call bio_endio() from the dm-crypt tasklet
dm integrity: fix flush with external metadata device
dm: eliminate potential source of excessive kernel log noise
dm snapshot: flush merged data before committing metadata
dm crypt: use GFP_ATOMIC when allocating crypto requests from softirq
dm crypt: do not wait for backlogged crypto request completion in softirq
dm zoned: select CONFIG_CRC32
dm integrity: select CRYPTO_SKCIPHER
dm raid: fix discard limits for raid1
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2021-01-16
1) Extend atomic operations to the BPF instruction set along with x86-64 JIT support,
that is, atomic{,64}_{xchg,cmpxchg,fetch_{add,and,or,xor}}, from Brendan Jackman.
2) Add support for using kernel module global variables (__ksym externs in BPF
programs) retrieved via module's BTF, from Andrii Nakryiko.
3) Generalize BPF stackmap's buildid retrieval and add support to have buildid
stored in mmap2 event for perf, from Jiri Olsa.
4) Various fixes for cross-building BPF sefltests out-of-tree which then will
unblock wider automated testing on ARM hardware, from Jean-Philippe Brucker.
5) Allow to retrieve SOL_SOCKET opts from sock_addr progs, from Daniel Borkmann.
6) Clean up driver's XDP buffer init and split into two helpers to init per-
descriptor and non-changing fields during processing, from Lorenzo Bianconi.
7) Minor misc improvements to libbpf & bpftool, from Ian Rogers.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (41 commits)
perf: Add build id data in mmap2 event
bpf: Add size arg to build_id_parse function
bpf: Move stack_map_get_build_id into lib
bpf: Document new atomic instructions
bpf: Add tests for new BPF atomic operations
bpf: Add bitwise atomic instructions
bpf: Pull out a macro for interpreting atomic ALU operations
bpf: Add instructions for atomic_[cmp]xchg
bpf: Add BPF_FETCH field / create atomic_fetch_add instruction
bpf: Move BPF_STX reserved field check into BPF_STX verifier code
bpf: Rename BPF_XADD and prepare to encode other atomics in .imm
bpf: x86: Factor out a lookup table for some ALU opcodes
bpf: x86: Factor out emission of REX byte
bpf: x86: Factor out emission of ModR/M for *(reg + off)
tools/bpftool: Add -Wall when building BPF programs
bpf, libbpf: Avoid unused function warning on bpf_tail_call_static
selftests/bpf: Install btf_dump test cases
selftests/bpf: Fix installation of urandom_read
selftests/bpf: Move generated test files to $(TEST_GEN_FILES)
selftests/bpf: Fix out-of-tree build
...
====================
Link: https://lore.kernel.org/r/20210116012922.17823-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add support for Arrow SpeedChips XRS700x single byte tag trailer. This
is modeled on tag_trailer.c which works in a similar way.
Signed-off-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Merge misc fixes from Andrew Morton:
"10 patches.
Subsystems affected by this patch series: MAINTAINERS and mm (slub,
pagealloc, memcg, kasan, vmalloc, migration, hugetlb, memory-failure,
and process_vm_access)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm/process_vm_access.c: include compat.h
mm,hwpoison: fix printing of page flags
MAINTAINERS: add Vlastimil as slab allocators maintainer
mm/hugetlb: fix potential missing huge page size info
mm: migrate: initialize err in do_migrate_pages
mm/vmalloc.c: fix potential memory leak
arm/kasan: fix the array size of kasan_early_shadow_pte[]
mm/memcontrol: fix warning in mem_cgroup_page_lruvec()
mm/page_alloc: add a missing mm_page_alloc_zone_locked() tracepoint
mm, slub: consider rest of partial list if acquire_slab() fails
|
|
Syncing drm-intel-next and drm-intel-gt-next to unblock ADL enabling.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Set the minimum GCC version to 5.1 for arm64 due to earlier compiler
bugs.
- Make atomic helpers __always_inline to avoid a section mismatch when
compiling with clang.
- Fix the CMA and crashkernel reservations to use ZONE_DMA (remove the
arm64_dma32_phys_limit variable, no longer needed with a dynamic
ZONE_DMA sizing in 5.11).
- Remove redundant IRQ flag tracing that was leaving lockdep
inconsistent with the hardware state.
- Revert perf events based hard lockup detector that was causing
smp_processor_id() to be called in preemptible context.
- Some trivial cleanups - spelling fix, renaming S_FRAME_SIZE to
PT_REGS_SIZE, function prototypes added.
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: selftests: Fix spelling of 'Mismatch'
arm64: syscall: include prototype for EL0 SVC functions
compiler.h: Raise minimum version of GCC to 5.1 for arm64
arm64: make atomic helpers __always_inline
arm64: rename S_FRAME_SIZE to PT_REGS_SIZE
Revert "arm64: Enable perf events based hard lockup detector"
arm64: entry: remove redundant IRQ flag tracing
arm64: Remove arm64_dma32_phys_limit and its uses
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- A series to fix a regression when running as a fully virtualized
guest on an old Xen hypervisor not supporting PV interrupt callbacks
for HVM guests.
- A patch to add support to query Xen resource sizes (setting was
possible already) from user mode.
* tag 'for-linus-5.11-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/xen: Fix xen_hvm_smp_init() when vector callback not available
x86/xen: Don't register Xen IPIs when they aren't going to be used
x86/xen: Add xen_no_vector_callback option to test PCI INTX delivery
xen: Set platform PCI device INTX affinity to CPU0
xen: Fix event channel callback via INTX/GSI
xen/privcmd: allow fetching resource sizes
|
|
<u.kleine-koenig@pengutronix.de>
Uwe Kleine-König <uwe.kleine-koenig@pengutronix.de>:
From: Uwe Kleine-König <uwe.kleine-koenig@pengutronix.de>
Hello,
there are no known active users of the efm32 platform. Given that the
only machine that is supported has only 4 MiB of RAM its use is also
quite limited.
Back then it served as the platform to develop ARMv7-M support in Linux
which was quite fun and still is a blissful memory.
Still given that the code serves no purpose and this probably won't
change anytime soon, remove all platform support.
I'm unsure what to do with the device tree bindings. Should we delete
them, too?
Best regards
Uwe
Uwe Kleine-König (7):
ARM: drop efm32 platform
clk: Drop unused efm32gg driver
clocksource: Drop unused efm32 timer code
spi: Drop unused efm32 bus driver
i2c: Drop unused efm32 bus driver
tty: Drop unused efm32 serial driver
MAINTAINERS: Remove deleted platform efm32
MAINTAINERS | 7 -
arch/arm/Kconfig | 10 +-
arch/arm/Kconfig.debug | 17 -
arch/arm/Makefile | 1 -
arch/arm/boot/dts/Makefile | 2 -
arch/arm/boot/dts/efm32gg-dk3750.dts | 88 ---
arch/arm/boot/dts/efm32gg.dtsi | 177 -----
arch/arm/configs/efm32_defconfig | 98 ---
arch/arm/include/debug/efm32.S | 45 --
arch/arm/mach-efm32/Makefile | 2 -
arch/arm/mach-efm32/Makefile.boot | 4 -
arch/arm/mach-efm32/dtmachine.c | 16 -
arch/arm/mm/Kconfig | 1 -
drivers/clk/Makefile | 1 -
drivers/clk/clk-efm32gg.c | 84 ---
drivers/clocksource/Kconfig | 9 -
drivers/clocksource/Makefile | 1 -
drivers/clocksource/timer-efm32.c | 278 --------
drivers/i2c/busses/Kconfig | 7 -
drivers/i2c/busses/Makefile | 1 -
drivers/i2c/busses/i2c-efm32.c | 469 -------------
drivers/spi/Kconfig | 7 -
drivers/spi/Makefile | 1 -
drivers/spi/spi-efm32.c | 462 ------------
drivers/tty/serial/Kconfig | 13 -
drivers/tty/serial/Makefile | 1 -
drivers/tty/serial/efm32-uart.c | 852 -----------------------
include/linux/platform_data/efm32-spi.h | 15 -
include/linux/platform_data/efm32-uart.h | 19 -
include/uapi/linux/serial_core.h | 3 -
30 files changed, 1 insertion(+), 2690 deletions(-)
delete mode 100644 arch/arm/boot/dts/efm32gg-dk3750.dts
delete mode 100644 arch/arm/boot/dts/efm32gg.dtsi
delete mode 100644 arch/arm/configs/efm32_defconfig
delete mode 100644 arch/arm/include/debug/efm32.S
delete mode 100644 arch/arm/mach-efm32/Makefile
delete mode 100644 arch/arm/mach-efm32/Makefile.boot
delete mode 100644 arch/arm/mach-efm32/dtmachine.c
delete mode 100644 drivers/clk/clk-efm32gg.c
delete mode 100644 drivers/clocksource/timer-efm32.c
delete mode 100644 drivers/i2c/busses/i2c-efm32.c
delete mode 100644 drivers/spi/spi-efm32.c
delete mode 100644 drivers/tty/serial/efm32-uart.c
delete mode 100644 include/linux/platform_data/efm32-spi.h
delete mode 100644 include/linux/platform_data/efm32-uart.h
base-commit: 5c8fe583cce542aa0b84adc939ce85293de36e5e
--
2.29.2
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
|
|
Support for this machine was just removed, so drop the now unused spi
bus driver, too.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20210114151630.128830-5-u.kleine-koenig@pengutronix.de
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Support for this machine was just removed, so drop the now unused UART
driver, too.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20210115155130.185010-7-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This helper will register a software node and then assign
it to device at the same time. The function will also make
sure that the device can't have more than one software node.
Acked-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20210115094914.88401-2-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When building kernel with both LD_DEAD_CODE_DATA_ELIMINATION and
UBSAN, LLVM stack generates lots of "unnamed data" sections:
ld.lld: warning: net/built-in.a(netfilter/utils.o): (.data.$__unnamed_2)
is being placed in '.data.$__unnamed_2'
ld.lld: warning: net/built-in.a(netfilter/utils.o): (.data.$__unnamed_3)
is being placed in '.data.$__unnamed_3'
ld.lld: warning: net/built-in.a(netfilter/utils.o): (.data.$__unnamed_4)
is being placed in '.data.$__unnamed_4'
ld.lld: warning: net/built-in.a(netfilter/utils.o): (.data.$__unnamed_5)
is being placed in '.data.$__unnamed_5'
[...]
Also handle this by adding the related sections to generic definitions.
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
When building kernel with LD_DEAD_CODE_DATA_ELIMINATION, LLVM stack
generates separate sections for compound literals, just like in case
with enabled LTO [0]:
ld.lld: warning: drivers/built-in.a(mtd/nand/spi/gigadevice.o):
(.data..compoundliteral.14) is being placed in
'.data..compoundliteral.14'
ld.lld: warning: drivers/built-in.a(mtd/nand/spi/gigadevice.o):
(.data..compoundliteral.15) is being placed in
'.data..compoundliteral.15'
ld.lld: warning: drivers/built-in.a(mtd/nand/spi/gigadevice.o):
(.data..compoundliteral.16) is being placed in
'.data..compoundliteral.16'
ld.lld: warning: drivers/built-in.a(mtd/nand/spi/gigadevice.o):
(.data..compoundliteral.17) is being placed in
'.data..compoundliteral.17'
[...]
Handle this by adding the related sections to generic definitions
as suggested by Sami [0].
[0] https://lore.kernel.org/lkml/20201211184633.3213045-3-samitolvanen@google.com
Suggested-by: Sami Tolvanen <samitolvanen@google.com>
Suggested-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
|
The driver core ignores the return value of struct device_driver::remove
because there is only little that can be done. To simplify the quest to
make this function return void, let struct sunxi_rsb_driver::remove
return void, too. All users already unconditionally return 0, this
commit makes this obvious and ensures future users don't behave
differently. To simplify even further, make axp20x_device_remove()
return void instead of returning 0 unconditionally, too.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
GCC versions >= 4.9 and < 5.1 have been shown to emit memory references
beyond the stack pointer, resulting in memory corruption if an interrupt
is taken after the stack pointer has been adjusted but before the
reference has been executed. This leads to subtle, infrequent data
corruption such as the EXT4 problems reported by Russell King at the
link below.
Life is too short for buggy compilers, so raise the minimum GCC version
required by arm64 to 5.1.
Reported-by: Russell King <linux@armlinux.org.uk>
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Tested-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: <stable@vger.kernel.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Florian Weimer <fweimer@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20210105154726.GD1551@shell.armlinux.org.uk
Link: https://lore.kernel.org/r/20210112224832.10980-1-will@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
