summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2021-02-16tg3: Remove unused PHY_BRCM flagsFlorian Fainelli
The tg3 driver tried to communicate towards the PHY driver whether it wanted RGMII in-band signaling enabled or disabled however there is nothing that looks at those flags in drivers/net/phy/broadcom.c so this does do not anything. Suggested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16Merge branches 'clk-socfpga', 'clk-mstar', 'clk-qcom' and 'clk-warnings' ↵Stephen Boyd
into clk-next - PLL support on MStar/SigmaStar ARMv7 SoCs - CPU clks for Qualcomm SDX55 - GCC and RPMh clks for Qualcomm SC8180x and SC7280 SoCs - GCC clks for Qualcomm SM8350 - Video clk fixups on Qualcomm SM8250 - GPU clks for Qualcomm SDM660/SDM630 - Improvements for multimedia clks on Qualcomm MSM8998 - Fix many warnings with W=1 enabled builds under drivers/clk/ * clk-socfpga: clk: socfpga: agilex: add clock driver for eASIC N5X platform dt-bindings: documentation: add clock bindings information for eASIC N5X * clk-mstar: clk: mstar: msc313-mpll: Fix format specifier clk: mstar: Allow MStar clk drivers to be compile tested clk: mstar: MStar/SigmaStar MPLL driver clk: fixed: add devm helper for clk_hw_register_fixed_factor() dt-bindings: clk: mstar msc313 mpll binding description dt-bindings: clk: mstar msc313 mpll binding header * clk-qcom: (42 commits) clk: qcom: Add Global Clock controller (GCC) driver for SC7280 dt-bindings: clock: Add SC7280 GCC clock binding clk: qcom: rpmh: Add support for RPMH clocks on SC7280 dt-bindings: clock: Add RPMHCC bindings for SC7280 clk: qcom: gcc-sm8350: add gdsc dt-bindings: clock: Add QCOM SDM630 and SDM660 graphics clock bindings clk: qcom: Add SDM660 GPU Clock Controller (GPUCC) driver clk: qcom: mmcc-msm8996: Migrate gfx3d clock to clk_rcg2_gfx3d clk: qcom: rcg2: Stop hardcoding gfx3d pingpong parent numbers dt-bindings: clock: Add support for the SDM630 and SDM660 mmcc clk: qcom: Add SDM660 Multimedia Clock Controller (MMCC) driver clk: qcom: gcc-sdm660: Mark GPU CFG AHB clock as critical clk: qcom: gcc-sdm660: Mark MMSS NoC CFG AHB clock as critical clk: qcom: gpucc-msm8998: Allow fabia gpupll0 rate setting clk: qcom: gpucc-msm8998: Add resets, cxc, fix flags on gpu_gx_gdsc clk: qcom: gdsc: Implement NO_RET_PERIPH flag clk: qcom: mmcc-msm8998: Set bimc_smmu_gdsc always on clk: qcom: mmcc-msm8998: Add hardware clockgating registers to some clks clk: qcom: gcc-msm8998: Fix Alpha PLL type for all GPLLs clk: qcom: gcc-msm8998: Mark gpu_cfg_ahb_clk as critical ... * clk-warnings: (27 commits) clk: zynq: clkc: Remove various instances of an unused variable 'clk' clk: versatile: clk-icst: Fix worthy struct documentation block clk: ti: gate: Fix possible doc-rot in 'omap36xx_gate_clk_enable_with_hsdiv_restore' clk: ti: dpll: Fix misnaming of '_register_dpll()'s 'user' parameter clk: ti: clockdomain: Fix description for 'omap2_init_clk_clkdm's hw param clk: st: clkgen-fsyn: Fix worthy struct documentation demote partially filled one clk: st: clkgen-pll: Demote unpopulated kernel-doc header clk: mvebu: ap-cpu-clk: Demote non-conformant kernel-doc header clk: socfpga: clk-pll-a10: Remove set but unused variable 'rc' clk: socfpga: clk-pll: Remove unused variable 'rc' clk: sifive: fu540-prci: Declare static const variable 'prci_clk_fu540' where it's used clk: bcm: clk-iproc-pll: Demote kernel-doc abuse clk: zynqmp: divider: Add missing description for 'max_div' clk: spear: Move prototype to accessible header clk: qcom: clk-rpm: Remove a bunch of superfluous code clk: clk-xgene: Add description for 'mask' and fix formatting for 'flags' clk: qcom: mmcc-msm8974: Remove unused static const tables 'mmcc_xo_mmpll0_1_2_gpll0{map}' clk: clk-npcm7xx: Remove unused static const tables 'npcm7xx_gates' and 'npcm7xx_divs_fx' clk: clk-fixed-mmio: Demote obvious kernel-doc abuse clk: qcom: gcc-ipq4019: Remove unused variable 'ret' ...
2021-02-16Merge branches 'clk-mediatek', 'clk-imx', 'clk-amlogic' and 'clk-at91' into ↵Stephen Boyd
clk-next * clk-mediatek: clk: mediatek: mux: Update parent at enable time clk: mediatek: mux: Drop unused clock ops clk: mediatek: Select all the MT8183 clocks by default * clk-imx: dt-bindings: clock: imx: Switch to my personal address MAINTAINERS: Add section for NXP i.MX clock drivers clk: imx: Move 'imx6sl_set_wait_clk()'s prototype out to accessible header clk: imx8mn: add clkout1/2 support clk: imx8mm: add clkout1/2 support clk: imx8mq: add PLL monitor output clk: imx: clk-imx31: Remove unused static const table 'uart_clks' clk: imx6q: demote warning about pre-boot ldb_di_clk reparenting clk: imx: clk-imx8qxp: Add some SCU clocks support for MIPI-LVDS subsystems clk: imx: clk-imx8qxp: Register DC0 display clocks with imx_clk_scu2() clk: imx: clk-imx8qxp: Add SCU clocks support for DC0 bypass clocks clk: imx: clk-imx8qxp: Add SCU clocks support for DC0 PLL clocks * clk-amlogic: clk: meson: axg: Remove MIPI enable clock gate clk: meson-axg: remove CLKID_MIPI_ENABLE dt-bindings: clock: meson8b: remove non-existing clock macros clk: meson: meson8b: remove compatibility code for old .dtbs clk: meson: clk-pll: propagate the error from meson_clk_pll_set_rate() clk: meson: clk-pll: make "ret" a signed integer clk: meson: clk-pll: fix initializing the old rate (fallback) for a PLL * clk-at91: clk: at91: Fix the declaration of the clocks
2021-02-16Merge branch 'clk-unused' into clk-nextStephen Boyd
- Remove efm32 clk driver - Remove tango4 clk driver - Remove zte zx clk driver - Remove sirf prima2/atlast clk drivers - Remove u300 clk driver * clk-unused: clk: remove u300 driver clk: remove sirf prima2/atlas drivers clk: remove zte zx driver clk: remove tango4 driver clk: Drop unused efm32gg driver
2021-02-16Merge branches 'clk-doc', 'clk-renesas', 'clk-allwinner', 'clk-rockchip' and ↵Stephen Boyd
'clk-xilinx' into clk-next - Convert Xilinx VCU clk driver to a proper clk provider driver - Expose Xilinx ZynqMP clk driver to more platforms * clk-doc: linux/clk.h: use correct kernel-doc notation for 2 functions * clk-renesas: (21 commits) clk: renesas: cpg-mssr: Fix formatting issues for 'smstpcr_saved's documentation clk: renesas: r8a779a0: Add RAVB clocks clk: renesas: r8a779a0: Add I2C clocks dt-bindings: clock: renesas: rcar-usb2-clock-sel: Add support for RZ/G2 M/N/H clk: renesas: r8a779a0: Add SYS-DMAC clocks clk: renesas: r8a779a0: Add SDHI support clk: renesas: rcar-gen3: Factor out CPG library clk: renesas: rcar-gen3: Remove cpg_quirks access when registering SD clock clk: renesas: r8a779a0: Add MSIOF clocks clk: renesas: r8a779a0: Add PFC/GPIO clocks clk: renesas: r8a779a0: Fix parent of CBFUSA clock clk: renesas: r8a779a0: Remove non-existent S2 clock clk: renesas: r8a779a0: Add HSCIF support clk: renesas: r8a779a0: Add RWDT clocks clk: renesas: r8a779a0: Add VSPX clock support clk: renesas: r8a779a0: Add VSPD clock support clk: renesas: r8a779a0: Add FCPVD clock support clk: renesas: r8a77995: Add TMU clocks clk: renesas: r8a77990: Add TMU clocks clk: renesas: r8a77965: Add TMU clocks ... * clk-allwinner: clk: sunxi-ng: Add support for the Allwinner H616 CCU clk: sunxi-ng: Add support for the Allwinner H616 R-CCU dt-bindings: clk: sunxi-ccu: Add compatible string for Allwinner H616 clk: sunxi-ng: h6: Fix clock divider range on some clocks clk: sunxi: clk-mod0: Demote non-conformant kernel-doc header clk: sunxi: clk-a10-ve: Demote obvious kernel-doc abuse clk: sunxi: clk-sunxi: Demote a bunch of non-conformant kernel-doc headers clk: sunxi-ng: h6: Fix CEC clock clk: sunxi-ng: h6-r: Add R_APB2_RSB clock and reset * clk-rockchip: clk: rockchip: fix DPHY gate locations on rk3368 clk: rockchip: use clock id for SCLK_VIP_OUT on rk3368 clk: rockchip: add clock id for SCLK_VIP_OUT on rk3368 clk: rockchip: use clock ids for PCLK_DPHYRX and PCLK_DPHYTX0 on rk3368 clk: rockchip: add clock ids for PCLK_DPHYRX and PCLK_DPHYTX0 on rk3368 clk: rockchip: Demote non-conformant kernel-doc header in half-divider clk: rockchip: Demote kernel-doc abuses to standard comment blocks in plls clk: rockchip: Remove unused/undocumented struct members from clk-cpu clk: rockchip: Demote non-conformant kernel-doc headers in main clock code * clk-xilinx: clk: xilinx: move xlnx_vcu clock driver from soc soc: xilinx: vcu: fix alignment to open parenthesis soc: xilinx: vcu: fix repeated word the in comment soc: xilinx: vcu: use bitfields for register definition soc: xilinx: vcu: remove calculation of PLL configuration soc: xilinx: vcu: make the PLL configurable soc: xilinx: vcu: make pll post divider explicit soc: xilinx: vcu: implement clock provider for output clocks soc: xilinx: vcu: register PLL as fixed rate clock soc: xilinx: vcu: implement PLL disable soc: xilinx: vcu: add helpers for configuring PLL soc: xilinx: vcu: add helper to wait for PLL locked soc: xilinx: vcu: drop coreclk from struct xlnx_vcu clk: divider: fix initialization with parent_hw ARM: dts: vcu: define indexes for output clocks clk: axi-clkgen: use devm_platform_ioremap_resource() short-hand dt-bindings: clock: adi,axi-clkgen: add compatible string for ZynqMP support clk: clk-axiclkgen: add ZynqMP PFD and VCO limits clk: axi-clkgen: replace ARCH dependencies with driver deps
2021-02-16net/mlx5: Move all internal timer metadata into a dedicated structEran Ben Elisha
Internal timer mode (SW clock) requires some PTP clock related metadata structs. Real time mode (HW clock) will not need these metadata structs. This separation emphasize the different interfaces for HW clock and SW clock. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Aya Levin <ayal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-02-16net/mlx5: Add register layout to support real-time time-stampEran Ben Elisha
Add needed structure layouts and defines for MTUTC (Management UTC) register. MTUTC will be used for cyc2time HW translation. In addition, add cyc2time modify capability bit and init segment HCA real time address. Finally, add capability bits indicating which time-stamping format is supported per SQ and RQ. Add ts_format in the queue's context layout to allow configuration. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-02-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf-next 2021-02-16 The following pull-request contains BPF updates for your *net-next* tree. There's a small merge conflict between 7eeba1706eba ("tcp: Add receive timestamp support for receive zerocopy.") from net-next tree and 9cacf81f8161 ("bpf: Remove extra lock_sock for TCP_ZEROCOPY_RECEIVE") from bpf-next tree. Resolve as follows: [...] lock_sock(sk); err = tcp_zerocopy_receive(sk, &zc, &tss); err = BPF_CGROUP_RUN_PROG_GETSOCKOPT_KERN(sk, level, optname, &zc, &len, err); release_sock(sk); [...] We've added 116 non-merge commits during the last 27 day(s) which contain a total of 156 files changed, 5662 insertions(+), 1489 deletions(-). The main changes are: 1) Adds support of pointers to types with known size among global function args to overcome the limit on max # of allowed args, from Dmitrii Banshchikov. 2) Add bpf_iter for task_vma which can be used to generate information similar to /proc/pid/maps, from Song Liu. 3) Enable bpf_{g,s}etsockopt() from all sock_addr related program hooks. Allow rewriting bind user ports from BPF side below the ip_unprivileged_port_start range, both from Stanislav Fomichev. 4) Prevent recursion on fentry/fexit & sleepable programs and allow map-in-map as well as per-cpu maps for the latter, from Alexei Starovoitov. 5) Add selftest script to run BPF CI locally. Also enable BPF ringbuffer for sleepable programs, both from KP Singh. 6) Extend verifier to enable variable offset read/write access to the BPF program stack, from Andrei Matei. 7) Improve tc & XDP MTU handling and add a new bpf_check_mtu() helper to query device MTU from programs, from Jesper Dangaard Brouer. 8) Allow bpf_get_socket_cookie() helper also be called from [sleepable] BPF tracing programs, from Florent Revest. 9) Extend x86 JIT to pad JMPs with NOPs for helping image to converge when otherwise too many passes are required, from Gary Lin. 10) Verifier fixes on atomics with BPF_FETCH as well as function-by-function verification both related to zero-extension handling, from Ilya Leoshkevich. 11) Better kernel build integration of resolve_btfids tool, from Jiri Olsa. 12) Batch of AF_XDP selftest cleanups and small performance improvement for libbpf's xsk map redirect for newer kernels, from Björn Töpel. 13) Follow-up BPF doc and verifier improvements around atomics with BPF_FETCH, from Brendan Jackman. 14) Permit zero-sized data sections e.g. if ELF .rodata section contains read-only data from local variables, from Yonghong Song. 15) veth driver skb bulk-allocation for ndo_xdp_xmit, from Lorenzo Bianconi. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-16NFS: Add support for eager writesTrond Myklebust
Support eager writing to the server, meaning that we write the data to cache on the server, and wait for that to complete. This ensures that we see ENOSPC errors immediately. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2021-02-16NFS: 'flags' field should be unsigned in struct nfs_serverTrond Myklebust
The mount flags are all unsigned integers, so we should not be storing them in a signed field. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2021-02-16Merge branch 'mlx5_timestamp' into rdma.git for-nextJason Gunthorpe
Leon Romanovsky says: ==================== Add an extra timestamp format for mlx5_ib device. ==================== Based on the mlx5-next branch at git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux due to dependencies. Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> * branch 'mlx5_timestamp': RDMA/mlx5: Fail QP creation if the device can not support the CQE TS net/mlx5: Add new timestamp mode bits
2021-02-16RDMA/mlx5: Allow CQ creation without attached EQsTal Gilboa
The traditional DevX CQ creation flow goes through mlx5_core_create_cq() which checks that the given EQN corresponds to an existing EQ and attaches a devx handler to the EQN for the CQ. In some cases the EQ will not be a kernel EQ, but will be controlled by modify CQ, don't block creating these just because the EQN can't be found in the kernel. Link: https://lore.kernel.org/r/20210211085549.1277674-1-leon@kernel.org Signed-off-by: Tal Gilboa <talgi@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-02-16RDMA/ipoib: Remove racy Subnet Manager sendonly join checksChristoph Lameter
When a system receives a REREG event from the SM, then the SM information in the kernel is marked as invalid and a request is sent to the SM to update the information. The SM information is invalid in that time period. However, receiving a REREG also occurs simultaneously in user space applications that are now trying to rejoin the multicast groups. Some of those may be sendonly multicast groups which are then failing. If the SM information is invalid then ib_sa_sendonly_fullmem_support() returns false. That is wrong because it just means that we do not know yet if the potentially new SM supports sendonly joins. Sendonly join was introduced in 2015 and all the Subnet managers have supported it ever since. So there is no point in checking if a subnet manager supports it. Should an old opensm get a request for a sendonly join then the request will fail. The code that is removed here accomodated that situation and fell back to a full join. Falling back to a full join is problematic in itself. The reason to use the sendonly join was to reduce the traffic on the Infiniband fabric otherwise one could have just stayed with the regular join. So this patch may cause users of very old opensms to discover that lots of traffic needlessly crosses their IB fabrics. Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2101281845160.13303@www.lameter.com Signed-off-by: Christoph Lameter <cl@linux.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-02-16SUNRPC: Use TCP_CORK to optimise send performance on the serverTrond Myklebust
Use a counter to keep track of how many requests are queued behind the xprt->xpt_mutex, and keep TCP_CORK set until the queue is empty. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Link: https://lore.kernel.org/linux-nfs/20210213202532.23146-1-trondmy@kernel.org/T/#u Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2021-02-16vmlinux.lds.h: catch more UBSAN symbols into .dataAlexander Lobakin
LKP triggered lots of LD orphan warnings [0]: mipsel-linux-ld: warning: orphan section `.data.$Lubsan_data299' from `init/do_mounts_rd.o' being placed in section `.data.$Lubsan_data299' mipsel-linux-ld: warning: orphan section `.data.$Lubsan_data183' from `init/do_mounts_rd.o' being placed in section `.data.$Lubsan_data183' mipsel-linux-ld: warning: orphan section `.data.$Lubsan_type3' from `init/do_mounts_rd.o' being placed in section `.data.$Lubsan_type3' mipsel-linux-ld: warning: orphan section `.data.$Lubsan_type2' from `init/do_mounts_rd.o' being placed in section `.data.$Lubsan_type2' mipsel-linux-ld: warning: orphan section `.data.$Lubsan_type0' from `init/do_mounts_rd.o' being placed in section `.data.$Lubsan_type0' [...] Seems like "unnamed data" isn't the only type of symbols that UBSAN instrumentation can emit. Catch these into .data with the wildcard as well. [0] https://lore.kernel.org/linux-mm/202102160741.k57GCNSR-lkp@intel.com Fixes: f41b233de0ae ("vmlinux.lds.h: catch UBSAN's "unnamed data" into data") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Alexander Lobakin <alobakin@pm.me> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2021-02-16net/mlx5: Add new timestamp mode bitsAharon Landau
These fields declare which timestamp mode is supported by the device per RQ/SQ/QP. In addition add the ts_format field to the select the mode for RQ/SQ/QP. Link: https://lore.kernel.org/r/20210209131107.698833-2-leon@kernel.org Signed-off-by: Aharon Landau <aharonl@nvidia.com> Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
2021-02-16libceph: deprecate [no]cephx_require_signatures optionsIlya Dryomov
These options were introduced in 3.19 with support for message signing and are rather useless, as explained in commit a51983e4dd2d ("libceph: add nocephx_sign_messages option"). Deprecate them. In case there is someone out there with a cluster that lacks support for MSG_AUTH feature (very unlikely but has to be considered since we haven't formally raised the bar from argonaut to bobtail yet), make nocephx_sign_messages also waive MSG_AUTH requirement. This is probably how it should have been done in the first place -- if we aren't going to sign, requiring the signing feature makes no sense. Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Jeff Layton <jlayton@kernel.org>
2021-02-16kcmp: Support selection of SYS_kcmp without CHECKPOINT_RESTOREChris Wilson
Userspace has discovered the functionality offered by SYS_kcmp and has started to depend upon it. In particular, Mesa uses SYS_kcmp for os_same_file_description() in order to identify when two fd (e.g. device or dmabuf) point to the same struct file. Since they depend on it for core functionality, lift SYS_kcmp out of the non-default CONFIG_CHECKPOINT_RESTORE into the selectable syscall category. Rasmus Villemoes also pointed out that systemd uses SYS_kcmp to deduplicate the per-service file descriptor store. Note that some distributions such as Ubuntu are already enabling CHECKPOINT_RESTORE in their configs and so, by extension, SYS_kcmp. References: https://gitlab.freedesktop.org/drm/intel/-/issues/3046 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Kees Cook <keescook@chromium.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Will Drewry <wad@chromium.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Dave Airlie <airlied@gmail.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Lucas Stach <l.stach@pengutronix.de> Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: stable@vger.kernel.org Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> # DRM depends on kcmp Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> # systemd uses kcmp Reviewed-by: Cyrill Gorcunov <gorcunov@gmail.com> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210205220012.1983-1-chris@chris-wilson.co.uk
2021-02-16KEYS: trusted: Reserve TPM for seal and unseal operationsJarkko Sakkinen
When TPM 2.0 trusted keys code was moved to the trusted keys subsystem, the operations were unwrapped from tpm_try_get_ops() and tpm_put_ops(), which are used to take temporarily the ownership of the TPM chip. The ownership is only taken inside tpm_send(), but this is not sufficient, as in the key load TPM2_CC_LOAD, TPM2_CC_UNSEAL and TPM2_FLUSH_CONTEXT need to be done as a one single atom. Take the TPM chip ownership before sending anything with tpm_try_get_ops() and tpm_put_ops(), and use tpm_transmit_cmd() to send TPM commands instead of tpm_send(), reverting back to the old behaviour. Fixes: 2e19e10131a0 ("KEYS: trusted: Move TPM2 trusted keys code") Reported-by: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: stable@vger.kernel.org Cc: David Howells <dhowells@redhat.com> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: Sumit Garg <sumit.garg@linaro.org> Acked-by Sumit Garg <sumit.garg@linaro.org> Tested-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2021-02-16tpm: add sysfs exports for all banks of PCR registersJames Bottomley
Create sysfs per hash groups with 24 PCR files in them one group, named pcr-<hash>, for each agile hash of the TPM. The files are plugged in to a PCR read function which is TPM version agnostic, so this works also for TPM 1.2 but the hash is only sha1 in that case. Note: the macros used to create the hashes emit spurious checkpatch warnings. Do not try to "fix" them as checkpatch recommends, otherwise they'll break. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Tested-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Tested-by: Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
2021-02-16kbuild: simplify access to the kernel's versionSasha Levin
Instead of storing the version in a single integer and having various kernel (and userspace) code how it's constructed, export individual (major, patchlevel, sublevel) components and simplify kernel code that uses it. This should also make it easier on userspace. Signed-off-by: Sasha Levin <sashal@kernel.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-02-16vmlinux.lds.h: add DWARF v5 sectionsNick Desaulniers
We expect toolchains to produce these new debug info sections as part of DWARF v5. Add explicit placements to prevent the linker warnings from --orphan-section=warn. Compilers may produce such sections with explicit -gdwarf-5, or based on the implicit default version of DWARF when -g is used via DEBUG_INFO. This implicit default changes over time, and has changed to DWARF v5 with GCC 11. .debug_sup was mentioned in review, but without compilers producing it today, let's wait to add it until it becomes necessary. Cc: stable@vger.kernel.org Link: https://bugzilla.redhat.com/show_bug.cgi?id=1922707 Reported-by: Chris Murphy <lists@colorremedies.com> Suggested-by: Fangrui Song <maskray@google.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Mark Wielaard <mark@klomp.org> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-02-16kbuild: check the minimum compiler version in KconfigMasahiro Yamada
Paul Gortmaker reported a regression in the GCC version check. [1] If you use GCC 4.8, the build breaks before showing the error message "error Sorry, your version of GCC is too old - please use 4.9 or newer." I do not want to apply his fix-up since it implies we would not be able to remove any cc-option test. Anyway, I admit checking the GCC version in <linux/compiler-gcc.h> is too late. Almost at the same time, Linus also suggested to move the compiler version error to Kconfig time. [2] I unified the two similar scripts, gcc-version.sh and clang-version.sh into cc-version.sh. The old scripts invoked the compiler multiple times (3 times for gcc-version.sh, 4 times for clang-version.sh). I refactored the code so the new one invokes the compiler just once, and also tried my best to use shell-builtin commands where possible. The new script runs faster. $ time ./scripts/clang-version.sh clang 120000 real 0m0.029s user 0m0.012s sys 0m0.021s $ time ./scripts/cc-version.sh clang Clang 120000 real 0m0.009s user 0m0.006s sys 0m0.004s cc-version.sh also shows an error message if the compiler is too old: $ make defconfig CC=clang-9 *** Default configuration is based on 'x86_64_defconfig' *** *** Compiler is too old. *** Your Clang version: 9.0.1 *** Minimum Clang version: 10.0.1 *** scripts/Kconfig.include:46: Sorry, this compiler is not supported. make[1]: *** [scripts/kconfig/Makefile:81: defconfig] Error 1 make: *** [Makefile:602: defconfig] Error 2 The new script takes care of ICC because we have <linux/compiler-intel.h> although I am not sure if building the kernel with ICC is well-supported. [1]: https://lore.kernel.org/r/20210110190807.134996-1-paul.gortmaker@windriver.com [2]: https://lore.kernel.org/r/CAHk-=wh-+TMHPTFo1qs-MYyK7tZh-OQovA=pP3=e06aCVp6_kA@mail.gmail.com Fixes: 87de84c9140e ("kbuild: remove cc-option test of -Werror=date-time") Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Tested-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Miguel Ojeda <ojeda@kernel.org> Tested-by: Miguel Ojeda <ojeda@kernel.org> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-02-15net: phy: rename PHY_IGNORE_INTERRUPT to PHY_MAC_INTERRUPTHeiner Kallweit
Some internal PHY's have their events like link change reported by the MAC interrupt. We have PHY_IGNORE_INTERRUPT to deal with this scenario. I'm not too happy with this name. We don't ignore interrupts, typically there is no interrupt exposed at a PHY level. So let's rename it to PHY_MAC_INTERRUPT. This is in line with phy_mac_interrupt(), which is called from the MAC interrupt handler to handle PHY events. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-15net: phy: broadcom: Allow BCM54210E to configure APDFlorian Fainelli
BCM54210E/BCM50212E has been verified to work correctly with the auto-power down configuration done by bcm54xx_adjust_rxrefclk(), add it to the list of PHYs working. While we are at it, provide an appropriate name for the bit we are changing which disables the RXC and TXC during auto-power down when there is no energy on the cable. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-15net: phy: broadcom: Remove unused flagsFlorian Fainelli
We have a number of unused flags defined today and since we are scarce on space and may need to introduce new flags in the future remove and shift every existing flag down into a contiguous assignment. PHY_BCM_FLAGS_MODE_1000BX was only used internally for the BCM54616S PHY, so we allocate a driver private structure instead to store that flag instead of canibalizing one from phydev->dev_flags for that purpose. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-15mptcp: add local addr info in mptcp_infoGeliang Tang
Add mptcpi_local_addr_used and mptcpi_local_addr_max in struct mptcp_info. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-15net: bridge: fix switchdev_port_attr_set stub when CONFIG_SWITCHDEV=nVladimir Oltean
The switchdev_port_attr_set function prototype was updated only for the case where CONFIG_SWITCHDEV=y|m, leaving a prototype mismatch with the stub definition for the disabled case. This results in a build error, so update that function too. Fixes: dcbdf1350e33 ("net: bridge: propagate extack through switchdev_port_attr_set") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-15atm: idt77252: fix build broken on amd64Tong Zhang
idt77252 is broken and wont load on amd64 systems modprobe idt77252 shows the following idt77252_init: skb->cb is too small (48 < 56) Add packed attribute to struct idt77252_skb_prv and struct atm_skb_data so that the total size can be <= sizeof(skb->cb) Also convert runtime size check to buildtime size check in idt77252_init() Signed-off-by: Tong Zhang <ztong0001@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-15thermal: qcom: add support for adc-tm5 PMIC thermal monitorDmitry Baryshkov
Add support for Thermal Monitoring part of PMIC5. This part is closely coupled with ADC, using it's channels directly. ADC-TM support generating interrupts on ADC value crossing low or high voltage bounds, which is used to support thermal trip points. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20210205000118.493610-3-dmitry.baryshkov@linaro.org
2021-02-15Merge remote-tracking branch 'iio-thermal-5.11-rc1/ib-iio-thermal-5.11-rc1' ↵Daniel Lezcano
into testing
2021-02-15sfi: Remove framework for deprecated firmwareAndy Shevchenko
SFI-based platforms are gone. So does this framework. This removes mention of SFI through the drivers and other code as well. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-02-15Merge branches 'powercap' and 'pm-misc'Rafael J. Wysocki
* powercap: powercap: intel_rapl: Use topology interface in rapl_init_domains() powercap: intel_rapl: Use topology interface in rapl_add_package() powercap/intel_rapl: add support for AlderLake Mobile powercap/drivers/dtpm: Fix size of object being allocated powercap/drivers/dtpm: Fix an IS_ERR() vs NULL check powercap/drivers/dtpm: Fix some missing unlock bugs powercap/drivers/dtpm: Fix a double shift bug powercap/drivers/dtpm: Fix __udivdi3 and __aeabi_uldivmod unresolved symbols powercap/drivers/dtpm: Add CPU energy model based support powercap/drivers/dtpm: Add API for dynamic thermal power management Documentation/powercap/dtpm: Add documentation for dtpm units: Add Watt units * pm-misc: PM: Kconfig: remove unneeded "default n" options PM: EM: update Kconfig description and drop "default n" option
2021-02-15binfmt_misc: pass binfmt_misc flags to the interpreterLaurent Vivier
It can be useful to the interpreter to know which flags are in use. For instance, knowing if the preserve-argv[0] is in use would allow to skip the pathname argument. This patch uses an unused auxiliary vector, AT_FLAGS, to add a flag to inform interpreter if the preserve-argv[0] is enabled. Note by Helge Deller: The real-world user of this patch is qemu-user, which needs to know if it has to preserve the argv[0]. See Debian bug #970460. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: YunQiang Su <ysu@wavecomp.com> URL: http://bugs.debian.org/970460 Signed-off-by: Helge Deller <deller@gmx.de>
2021-02-15netfilter: nftables: introduce table ownershipPablo Neira Ayuso
A userspace daemon like firewalld might need to monitor for netlink updates to detect its ruleset removal by the (global) flush ruleset command to ensure ruleset persistency. This adds extra complexity from userspace and, for some little time, the firewall policy is not in place. This patch adds the NFT_TABLE_F_OWNER flag which allows a userspace program to own the table that creates in exclusivity. Tables that are owned... - can only be updated and removed by the owner, non-owners hit EPERM if they try to update it or remove it. - are destroyed when the owner closes the netlink socket or the process is gone (implicit netlink socket closure). - are skipped by the global flush ruleset command. - are listed in the global ruleset. The userspace process that sets on the NFT_TABLE_F_OWNER flag need to leave open the netlink socket. A new NFTA_TABLE_OWNER netlink attribute specifies the netlink port ID to identify the owner from userspace. This patch also updates error reporting when an unknown table flag is specified to change it from EINVAL to EOPNOTSUPP given that EINVAL is usually reserved to report for malformed netlink messages to userspace. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-02-15Merge branch 'acpi-messages'Rafael J. Wysocki
* acpi-messages: ACPI: OSL: Clean up printing messages ACPI: OSL: Rework acpi_check_resource_conflict() ACPI: thermal: Clean up printing messages ACPI: video: Clean up printing messages ACPI: button: Clean up printing messages ACPI: battery: Clean up printing messages ACPI: AC: Clean up printing messages ACPI: bus: Drop ACPI_BUS_COMPONENT which is not used any more ACPI: utils: Clean up printing messages ACPI: scan: Clean up printing messages ACPI: bus: Clean up printing messages ACPI: PM: Clean up printing messages ACPI: power: Clean up printing messages
2021-02-15Merge branches 'acpi-misc', 'acpi-cppc', 'acpi-docs', 'acpi-config' and ↵Rafael J. Wysocki
'acpi-apei' * acpi-misc: ACPI: Test for ACPI_SUCCESS rather than !ACPI_FAILURE ACPI: Use DEVICE_ATTR_<RW|RO|WO> macros * acpi-cppc: ACPI: CPPC: initialise vaddr pointers to NULL ACPI: CPPC: add __iomem annotation to generic_comm_base pointer ACPI: CPPC: remove __iomem annotation for cpc_reg's address * acpi-docs: Documentation: ACPI: add new rule for gpio-line-names * acpi-config: ACPI: configfs: add missing check after configfs_register_default_group() * acpi-apei: ACPI: APEI: ERST: remove unneeded semicolon ACPI: APEI: Add is_generic_error() to identify GHES sources
2021-02-15Merge branches 'acpi-scan', 'acpi-properties' and 'acpi-platform'Rafael J. Wysocki
* acpi-scan: ACPI: scan: Rearrange code related to acpi_get_device_data() ACPI: scan: Adjust white space in acpi_device_add() ACPI: scan: Rearrange memory allocation in acpi_device_add() * acpi-properties: ACPI: property: Satisfy kernel doc validator (part 2) ACPI: property: Satisfy kernel doc validator (part 1) ACPI: property: Make acpi_node_prop_read() static ACPI: property: Remove dead code ACPI: property: Fix fwnode string properties matching * acpi-platform: ACPI: platform-profile: Fix possible deadlock in platform_profile_remove() ACPI: platform-profile: Introduce object pointers to callbacks ACPI: platform-profile: Drop const qualifier for cur_profile ACPI: platform: Add platform profile support Documentation: Add documentation for new platform_profile sysfs attribute
2021-02-15Merge branch 'pm-opp' into pmRafael J. Wysocki
* pm-opp: (37 commits) PM / devfreq: Add required OPPs support to passive governor PM / devfreq: Cache OPP table reference in devfreq OPP: Add function to look up required OPP's for a given OPP opp: Replace ENOTSUPP with EOPNOTSUPP opp: Fix "foo * bar" should be "foo *bar" opp: Don't ignore clk_get() errors other than -ENOENT opp: Update bandwidth requirements based on scaling up/down opp: Allow lazy-linking of required-opps opp: Remove dev_pm_opp_set_bw() devfreq: tegra30: Migrate to dev_pm_opp_set_opp() drm: msm: Migrate to dev_pm_opp_set_opp() cpufreq: qcom: Migrate to dev_pm_opp_set_opp() opp: Implement dev_pm_opp_set_opp() opp: Update parameters of _set_opp_custom() opp: Allow _generic_set_opp_clk_only() to work for non-freq devices opp: Allow _generic_set_opp_regulator() to work for non-freq devices opp: Allow _set_opp() to work for non-freq devices opp: Split _set_opp() out of dev_pm_opp_set_rate() opp: Keep track of currently programmed OPP opp: No need to check clk for errors ...
2021-02-15Merge branches 'pm-sleep', 'pm-core', 'pm-domains' and 'pm-clk'Rafael J. Wysocki
* pm-sleep: PM: sleep: Constify static struct attribute_group PM: sleep: Use dev_printk() when possible PM: sleep: No need to check PF_WQ_WORKER in thaw_kernel_threads() * pm-core: PM: runtime: Fix typos and grammar PM: runtime: Fix resposible -> responsible in runtime.c * pm-domains: PM: domains: Simplify the calculation of variables PM: domains: Add "performance" column to debug summary PM: domains: Make of_genpd_add_subdomain() return -EPROBE_DEFER PM: domains: Make set_performance_state() callback optional PM: domains: use device's next wakeup to determine domain idle state PM: domains: inform PM domain of a device's next wakeup * pm-clk: PM: clk: make PM clock layer compatible with clocks that must sleep
2021-02-15media: v4l: async: Fix kerneldoc documentation for async functionsSakari Ailus
Fix kerneldoc documentation for functions that add async sub-devices to notifiers. The functions themselves were improved recently but that left issues with the kerneldoc documentation. Fix them now. Also remove underscores from macro argument names. [mchehab: fix a build breakage] Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: b01edcbd409c ("media: v4l2-async: Improve v4l2_async_notifier_add_*_subdev() API") Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-15Revert "Drivers: hv: vmbus: Copy packets sent by Hyper-V out of the ring buffer"Wei Liu
This reverts commit a8c3209998afb5c4941b49e35b513cea9050cb4a. It is reported that the said commit caused regression in netvsc. Reported-by: Andrea Parri (Microsoft) <parri.andrea@gmail.com> Signed-off-by: Wei Liu <wei.liu@kernel.org>
2021-02-15gpio: uapi: use the preferred SPDX license identifierBartosz Golaszewski
GPL-2.0 license identifier is deprecated. User-space projects that want to include the kernel header with their source-code will be unable to become fully REUSE compliant due to the reuse tool complaining about deprecated licenses. Change the SPDX identifier to GPL-2.0-only. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15gpio: aggregator: Use compound literal from the headerAndy Shevchenko
Instead of doing it in place, convert GPIO_LOOKUP_IDX() and GPIO_HOG() to be compund literals that's allow to use them as rvalue in assignments. Due to above conversion, use compound literal from the header in the gpio-aggregator.c. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-02-15gpio: uapi: fix line info flags descriptionKent Gibson
The description of the flags field of the struct gpio_v2_line_info mentions "the GPIO lines" while the info only applies to an individual GPIO line. This was accidentally changed from "the GPIO line" during formatting improvements. Reword to "this GPIO line" to clarify and to be consistent with other struct gpio_v2_line_info fields. Fixes: 2cc522d3931b ("gpio: uapi: kernel-doc formatting improvements") Signed-off-by: Kent Gibson <warthog618@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-02-15Xen/gntdev: correct error checking in gntdev_map_grant_pages()Jan Beulich
Failure of the kernel part of the mapping operation should also be indicated as an error to the caller, or else it may assume the respective kernel VA is okay to access. Furthermore gnttab_map_refs() failing still requires recording successfully mapped handles, so they can be unmapped subsequently. This in turn requires there to be a way to tell full hypercall failure from partial success - preset map_op status fields such that they won't "happen" to look as if the operation succeeded. Also again use GNTST_okay instead of implying its value (zero). This is part of XSA-361. Signed-off-by: Jan Beulich <jbeulich@suse.com> Cc: stable@vger.kernel.org Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2021-02-14net: dsa: propagate extack to .port_vlan_filteringVladimir Oltean
Some drivers can't dynamically change the VLAN filtering option, or impose some restrictions, it would be nice to propagate this info through netlink instead of printing it to a kernel log that might never be read. Also netlink extack includes the module that emitted the message, which means that it's easier to figure out which ones are driver-generated errors as opposed to command misuse. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-14net: dsa: propagate extack to .port_vlan_addVladimir Oltean
Allow drivers to communicate their restrictions to user space directly, instead of printing to the kernel log. Where the conversion would have been lossy and things like VLAN ID could no longer be conveyed (due to the lack of support for printf format specifier in netlink extack), I chose to keep the messages in full form to the kernel log only, and leave it up to individual driver maintainers to move more messages to extack. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-14net: bridge: propagate extack through switchdev_port_attr_setVladimir Oltean
The benefit is the ability to propagate errors from switchdev drivers for the SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING and SWITCHDEV_ATTR_ID_BRIDGE_VLAN_PROTOCOL attributes. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-14net: dsa: tag_ocelot_8021q: add support for PTP timestampingVladimir Oltean
For TX timestamping, we use the felix_txtstamp method which is common with the regular (non-8021q) ocelot tagger. This method says that skb deferral is needed, prepares a timestamp request ID, and puts a clone of the skb in a queue waiting for the timestamp IRQ. felix_txtstamp is called by dsa_skb_tx_timestamp() just before the tagger's xmit method. In the tagger xmit, we divert the packets classified by dsa_skb_tx_timestamp() as PTP towards the MMIO-based injection registers, and we declare them as dead towards dsa_slave_xmit. If not PTP, we proceed with normal tag_8021q stuff. Then the timestamp IRQ fires, the clone queued up from felix_txtstamp is matched to the TX timestamp retrieved from the switch's FIFO based on the timestamp request ID, and the clone is delivered to the stack. On RX, thanks to the VCAP IS2 rule that redirects the frames with an EtherType for 1588 towards two destinations: - the CPU port module (for MMIO based extraction) and - if the "no XTR IRQ" workaround is in place, the dsa_8021q CPU port the relevant data path processing starts in the ptp_classify_raw BPF classifier installed by DSA in the RX data path (post tagger, which is completely unaware that it saw a PTP packet). This time we can't reuse the same implementation of .port_rxtstamp that also works with the default ocelot tagger. That is because felix_rxtstamp is given an skb with a freshly stripped DSA header, and it says "I don't need deferral for its RX timestamp, it's right in it, let me show you"; and it just points to the header right behind skb->data, from where it unpacks the timestamp and annotates the skb with it. The same thing cannot happen with tag_ocelot_8021q, because for one thing, the skb did not have an extraction frame header in the first place, but a VLAN tag with no timestamp information. So the code paths in felix_rxtstamp for the regular and 8021q tagger are completely independent. With tag_8021q, the timestamp must come from the packet's duplicate delivered to the CPU port module, but there is potentially complex logic to be handled [ and prone to reordering ] if we were to just start reading packets from the CPU port module, and try to match them to the one we received over Ethernet and which needs an RX timestamp. So we do something simple: we tell DSA "give me some time to think" (we request skb deferral by returning false from .port_rxtstamp) and we just drop the frame we got over Ethernet with no attempt to match it to anything - we just treat it as a notification that there's data to be processed from the CPU port module's queues. Then we proceed to read the packets from those, one by one, which we deliver up the stack, timestamped, using netif_rx - the same function that any driver would use anyway if it needed RX timestamp deferral. So the assumption is that we'll come across the PTP packet that triggered the CPU extraction notification eventually, but we don't know when exactly. Thanks to the VCAP IS2 trap/redirect rule and the exclusion of the CPU port module from the flooding replicators, only PTP frames should be present in the CPU port module's RX queues anyway. There is just one conflict between the VCAP IS2 trapping rule and the semantics of the BPF classifier. Namely, ptp_classify_raw() deems general messages as non-timestampable, but still, those are trapped to the CPU port module since they have an EtherType of ETH_P_1588. So, if the "no XTR IRQ" workaround is in place, we need to run another BPF classifier on the frames extracted over MMIO, to avoid duplicates being sent to the stack (once over Ethernet, once over MMIO). It doesn't look like it's possible to install VCAP IS2 rules based on keys extracted from the 1588 frame headers. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-12 18:39:45 +0000