| Age | Commit message (Collapse) | Author |
|---|
|
Prior to this patch, what we can see by enabling trace_tcp_send is
only happening under two circumstances:
1) active rst mode
2) non-active rst mode and based on the full socket
That means the inconsistency occurs if we use tcpdump and trace
simultaneously to see how rst happens.
It's necessary that we should take into other cases into considerations,
say:
1) time-wait socket
2) no socket
...
By parsing the incoming skb and reversing its 4-tuple can
we know the exact 'flow' which might not exist.
Samples after applied this patch:
1. tcp_send_reset: skbaddr=XXX skaddr=XXX src=ip:port dest=ip:port
state=TCP_ESTABLISHED
2. tcp_send_reset: skbaddr=000...000 skaddr=XXX src=ip:port dest=ip:port
state=UNKNOWN
Note:
1) UNKNOWN means we cannot extract the right information from skb.
2) skbaddr/skaddr could be 0
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Link: https://lore.kernel.org/r/20240401073605.37335-3-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introducing entry_saddr and entry_daddr parameters in this macro
for later use can help us record the reverse 4-tuple by analyzing
the 4-tuple of the incoming skb when receiving.
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240401073605.37335-2-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The kstack_offset variable was really only ever using the low bits for
kernel stack offset entropy. Add a ror32() to increase bit diffusion.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 39218ff4c625 ("stack: Optionally randomize kernel stack offset each syscall")
Link: https://lore.kernel.org/r/20240309202445.work.165-kees@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Both the vdso rework and the CONFIG_PAGE_SHIFT changes were merged during
the v6.9 merge window, so it is now possible to use CONFIG_PAGE_SHIFT
instead of including asm/page.h in the vdso.
This avoids the workaround for arm64 - commit 8b3843ae3634 ("vdso/datapage:
Quick fix - use asm/page-def.h for ARM64") and addresses a build warning
for powerpc64:
In file included from <built-in>:4:
In file included from /home/arnd/arm-soc/arm-soc/lib/vdso/gettimeofday.c:5:
In file included from ../include/vdso/datapage.h:25:
arch/powerpc/include/asm/page.h:230:9: error: result of comparison of constant 13835058055282163712 with expression of type 'unsigned long' is always true [-Werror,-Wtautological-constant-out-of-range-compare]
230 | return __pa(kaddr) >> PAGE_SHIFT;
| ^~~~~~~~~~~
arch/powerpc/include/asm/page.h:217:37: note: expanded from macro '__pa'
217 | VIRTUAL_WARN_ON((unsigned long)(x) < PAGE_OFFSET); \
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~
arch/powerpc/include/asm/page.h:202:73: note: expanded from macro 'VIRTUAL_WARN_ON'
202 | #define VIRTUAL_WARN_ON(x) WARN_ON(IS_ENABLED(CONFIG_DEBUG_VIRTUAL) && (x))
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~
arch/powerpc/include/asm/bug.h:88:25: note: expanded from macro 'WARN_ON'
88 | int __ret_warn_on = !!(x); \
| ^
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Link: https://lore.kernel.org/r/20240320180228.136371-1-arnd@kernel.org
|
|
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
This set of patches factors out some repeated code to clean up
firmware control read/write functions, and removes some redundant
control notification code.
base-commit: f193957b0fbbba397c8bddedf158b3bf7e4850fc
|
|
Add a new BPF instruction for resolving absolute addresses of per-CPU
data from their per-CPU offsets. This instruction is internal-only and
users are not allowed to use them directly. They will only be used for
internal inlining optimizations for now between BPF verifier and BPF JITs.
We use a special BPF_MOV | BPF_ALU64 | BPF_X form with insn->off field
set to BPF_ADDR_PERCPU = -1. I used negative offset value to distinguish
them from positive ones used by user-exposed instructions.
Such instruction performs a resolution of a per-CPU offset stored in
a register to a valid kernel address which can be dereferenced. It is
useful in any use case where absolute address of a per-CPU data has to
be resolved (e.g., in inlining bpf_map_lookup_elem()).
BPF disassembler is also taught to recognize them to support dumping
final BPF assembly code (non-JIT'ed version).
Add arch-specific way for BPF JITs to mark support for this instructions.
This patch also adds support for these instructions in x86-64 BPF JIT.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/20240402021307.1012571-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Pull KVM fixes from Paolo Bonzini:
"ARM:
- Ensure perf events programmed to count during guest execution are
actually enabled before entering the guest in the nVHE
configuration
- Restore out-of-range handler for stage-2 translation faults
- Several fixes to stage-2 TLB invalidations to avoid stale
translations, possibly including partial walk caches
- Fix early handling of architectural VHE-only systems to ensure E2H
is appropriately set
- Correct a format specifier warning in the arch_timer selftest
- Make the KVM banner message correctly handle all of the possible
configurations
RISC-V:
- Remove redundant semicolon in num_isa_ext_regs()
- Fix APLIC setipnum_le/be write emulation
- Fix APLIC in_clrip[x] read emulation
x86:
- Fix a bug in KVM_SET_CPUID{2,} where KVM looks at the wrong CPUID
entries (old vs. new) and ultimately neglects to clear PV_UNHALT
from vCPUs with HLT-exiting disabled
- Documentation fixes for SEV
- Fix compat ABI for KVM_MEMORY_ENCRYPT_OP
- Fix a 14-year-old goof in a declaration shared by host and guest;
the enabled field used by Linux when running as a guest pushes the
size of "struct kvm_vcpu_pv_apf_data" from 64 to 68 bytes. This is
really unconsequential because KVM never consumes anything beyond
the first 64 bytes, but the resulting struct does not match the
documentation
Selftests:
- Fix spelling mistake in arch_timer selftest"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (25 commits)
KVM: arm64: Rationalise KVM banner output
arm64: Fix early handling of FEAT_E2H0 not being implemented
KVM: arm64: Ensure target address is granule-aligned for range TLBI
KVM: arm64: Use TLBI_TTL_UNKNOWN in __kvm_tlb_flush_vmid_range()
KVM: arm64: Don't pass a TLBI level hint when zapping table entries
KVM: arm64: Don't defer TLB invalidation when zapping table entries
KVM: selftests: Fix __GUEST_ASSERT() format warnings in ARM's arch timer test
KVM: arm64: Fix out-of-IPA space translation fault handling
KVM: arm64: Fix host-programmed guest events in nVHE
RISC-V: KVM: Fix APLIC in_clrip[x] read emulation
RISC-V: KVM: Fix APLIC setipnum_le/be write emulation
RISC-V: KVM: Remove second semicolon
KVM: selftests: Fix spelling mistake "trigged" -> "triggered"
Documentation: kvm/sev: clarify usage of KVM_MEMORY_ENCRYPT_OP
Documentation: kvm/sev: separate description of firmware
KVM: SEV: fix compat ABI for KVM_MEMORY_ENCRYPT_OP
KVM: selftests: Check that PV_UNHALT is cleared when HLT exiting is disabled
KVM: x86: Use actual kvm_cpuid.base for clearing KVM_FEATURE_PV_UNHALT
KVM: x86: Introduce __kvm_get_hypervisor_cpuid() helper
KVM: SVM: Return -EINVAL instead of -EBUSY on attempt to re-init SEV/SEV-ES
...
|
|
It is a common pattern for functions to take and release the DSP
pwr_lock over the cs_dsp calls to read and write firmware controls.
Add wrapper functions to do this sequence so that the calling code can
be simplified to a single function call..
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://msgid.link/r/20240325113127.112783-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some of these, particularly the wm_adsp one in the immediate case, are
needed as a basis for new work.
|
|
Checkpatch warns that else is generally not necessary after a return
condition which exists in the if part of this function.
Hence, just to abide by what checkpatch recommends, follow it's
guidelines.
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The device_wakeup_disable() call only returns an error if no dev exists,
but there's not much a user can do at that point.
Rather, make this function return void.
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
The Trusted Services project provides a framework for developing and
deploying device Root of Trust services in FF-A Secure Partitions. The
FF-A SPs are accessible through the FF-A driver, but this doesn't
provide a user space interface. The goal of this TEE driver is to make
Trusted Services SPs accessible for user space clients.
All TS SPs have the same FF-A UUID, it identifies the RPC protocol used
by TS. A TS SP can host one or more services, a service is identified by
its service UUID. The same type of service cannot be present twice in
the same SP. During SP boot each service in an SP is assigned an
interface ID, this is just a short ID to simplify message addressing.
There is 1:1 mapping between TS SPs and TEE devices, i.e. a separate TEE
device is registered for each TS SP. This is required since contrary to
the generic TEE design where memory is shared with the whole TEE
implementation, in case of FF-A, memory is shared with a specific SP. A
user space client has to be able to separately share memory with each SP
based on its endpoint ID.
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Balint Dobszay <balint.dobszay@arm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Move the pool alloc and free helper functions from the OP-TEE driver to
the TEE subsystem, since these could be reused in other TEE drivers.
This patch is not supposed to change behavior, it's only reorganizing
the code.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Suggested-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Balint Dobszay <balint.dobszay@arm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
No more users.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
For short netdev holds within a function there are still a lot of
users of dev_put() rather than netdev_put(). Add DEFINE_FREE() to
allow making those safer.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The new guard/scoped_gard can be useful for the RTNL as well,
so add a guard definition for it. It gets used like
{
guard(rtnl)();
// RTNL held until end of block
}
or
scoped_guard(rtnl) {
// RTNL held in this block
}
as with any other guard/scoped_guard.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, the microcode field (Microcode Revision) of 'struct mce' is not
exposed to userspace through the mce_record tracepoint.
Knowing the microcode version on which the MCE was received is critical
information for debugging. If the version is not recorded, later attempts
to acquire the version might result in discrepancies since it can be
changed at runtime.
Add microcode version to the tracepoint to prevent ambiguity over
the active version on the system when the MCE was received.
Signed-off-by: Avadhut Naik <avadhut.naik@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20240401171455.1737976-3-avadhut.naik@amd.com
|
|
Machine Check Error information from 'struct mce' is exposed to userspace
through the mce_record tracepoint.
Currently, however, the PPIN (Protected Processor Inventory Number) field
of 'struct mce' is not exposed.
Add a PPIN field to the tracepoint as it provides a unique identifier for
the system (or socket in case of multi-socket systems) on which the MCE
has been received.
Also, add a comment explaining the kind of information that can be and
should be added to the tracepoint.
Signed-off-by: Avadhut Naik <avadhut.naik@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20240401171455.1737976-2-avadhut.naik@amd.com
|
|
Since commit 25559c22cef8 ("tee: add kernel internal client interface"),
it has been a common include/linux/tee_drv.h header file which is shared
to hold TEE subsystem internal bits along with the APIs exposed to the
TEE client drivers. However, this practice is prone to TEE subsystem
internal APIs abuse and especially so with the new TEE implementation
drivers being added to reuse existing functionality.
In order to address this split TEE subsystem internal bits as a separate
header file: include/linux/tee_core.h which should be the one used by
TEE implementation drivers. With that include/linux/tee_drv.h lists only
APIs exposed by TEE subsystem to the TEE client drivers.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Balint Dobszay <balint.dobszay@arm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
generated with:
$ ./tools/net/ynl/ynl-gen-c.py --mode uapi \
> --spec Documentation/netlink/specs/team.yaml \
> --header -o include/uapi/linux/if_team.h
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240401031004.1159713-5-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since commit 099ecf59f05b ("net: annotate lockless accesses to
sk->sk_max_ack_backlog") decided to handle the sk_max_ack_backlog
locklessly, there is one more function mostly called in TCP/DCCP
cases. So this patch completes it:)
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240331090521.71965-1-kerneljasonxing@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since we have pool->p.napi (Jakub) and pool->cpuid (Lorenzo) to check
whether it's safe to use direct recycling, we can use both globally for
each page instead of relying solely on @allow_direct argument.
Let's assume that @allow_direct means "I'm sure it's local, don't waste
time rechecking this" and when it's false, try the mentioned params to
still recycle the page directly. If neither is true, we'll lose some
CPU cycles, but then it surely won't be hotpath. On the other hand,
paths where it's possible to use direct cache, but not possible to
safely set @allow_direct, will benefit from this move.
The whole propagation of @napi_safe through a dozen of skb freeing
functions can now go away, which saves us some stack space.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/20240329165507.3240110-2-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Change "a" to "an" according to the usual rules, fix an "if" that
was mistyped as "in", improve grammar in "considerable slow" ->
"considerably slower".
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20240329-misc-rhashtable-v1-1-5862383ff798@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Just rely on the xarray for any kind of bgid. This simplifies things, and
it really doesn't bring us much, if anything.
Cc: stable@vger.kernel.org # v6.4+
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add support for capture events. Captured counter value for each channel
can be retrieved through CCRx register.
STM32 timers can have up to 4 capture channels (on input channel 1 to
channel 4), hence need to check the number of channels before reading
the capture data.
The capture configuration is hard-coded to capture signals on both edges
(non-inverted). Interrupts are used to report events independently for
each channel.
Reviewed-by: William Breathitt Gray <william.gray@linaro.org>
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20240307133306.383045-11-fabrice.gasnier@foss.st.com
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
|
|
Now that there are two users for the "frequency" extension, introduce a
new COUNTER_COMP_FREQUENCY() macro.
This extension is intended to be a read-only signal attribute.
Suggested-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Link: https://lore.kernel.org/r/20240306153631.4051115-1-fabrice.gasnier@foss.st.com
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
|
|
Remove the @priv: line to prevent the kernel-doc warning:
include/linux/counter.h:400: warning: Excess struct member 'priv' description in 'counter_device'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: f2ee4759fb70 ("counter: remove old and now unused registration API")
Link: https://lore.kernel.org/r/20231223050511.13849-1-rdunlap@infradead.org
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
|
|
Adds wrapper function snd_ctl_find_id_mixer_locked(). This is
identical to snd_ctl_find_id_mixer() except that it can be called
from code that is already holding controls_rwsem.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://msgid.link/r/20240401100210.61277-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch improves the run-time calculation for program stats by
capturing the duration as soon as possible after the program returns.
Previously, the duration included u64_stats_t operations. While the
instrumentation overhead is part of the total time spent when stats are
enabled, distinguishing between the program's native execution time and
the time spent due to instrumentation is crucial for accurate
performance analysis.
By making this change, the patch facilitates more precise optimization
of BPF programs, enabling users to understand their performance in
environments without stats enabled.
I used a virtualized environment to measure the run-time over one minute
for a basic raw_tracepoint/sys_enter program, which just increments a
local counter. Although the virtualization introduced some performance
degradation that could affect the results, I observed approximately a
16% decrease in average run-time reported by stats with this change
(310 -> 260 nsec).
Signed-off-by: Jose Fernandez <josef@netflix.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240402034010.25060-1-josef@netflix.com
|
|
In a few places in the bpf uapi headers, EOPNOTSUPP is missing a "P" in
the doc comments. This adds the missing "P".
Signed-off-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240329152900.398260-2-dlechner@baylibre.com
|
|
Catching up on 6.9-rc2
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Modules registering driver with sdio_register_driver() might
forget to set .owner field. The field is used by some of other kernel
parts for reference counting (try_module_get()), so it is expected that
drivers will set it.
Solve the problem by moving this task away from the drivers to the core
code, just like we did for platform_driver in
commit 9447057eaff8 ("platform_device: use a macro instead of
platform_driver_register").
Since many drivers forget to set the .owner, this effectively will fix
them. Examples of fixed drivers are: ath6kl, b43, btsdio.c, ks7010,
libertas, MediaTek WiFi drivers, Realtek WiFi drivers, rsi, siano,
wilc1000, wl1251 and more.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20240329-module-owner-sdio-v1-1-e4010b11ccaa@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
Automatically clean up the conncetor-poll thread as part of the DRM
device release. The new helper drmm_kms_helper_poll_init() provides
a shared implementation for all drivers.
v6:
- fix kernel doc comment (Sui, kernel test robot)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Link: https://patchwork.freedesktop.org/patch/msgid/20240325200855.21150-14-tzimmermann@suse.de
|
|
Implement polling for VGA and SIL164 connectors. Set the flag
DRM_CONNECTOR_POLL_DISCONNECT for each to detect the removal of the
monitor cable. Implement struct drm_connector_helper_funcs.detect_ctx
for each type of connector by testing for EDID data.
The helper drm_connector_helper_detect_ctx() implements .detect_ctx()
on top of the connector's DDC channel. The function can be used by
other drivers as companion to drm_connector_helper_get_modes().
v6:
- change helper name to drm_connector_helper_detec_from_ddc()
(Maxime, Sui)
v5:
- share implementation in drm_connector_helper_detect_ctx() (Maxime)
- test for DDC presence with drm_probe_ddc() (Maxime, Jani)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Acked-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240325200855.21150-13-tzimmermann@suse.de
|
|
Backmerging to get v6.9-rc2 changes into drm-misc-next.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
genetlink.h is a shell of what used to be a combined uAPI
and kernel header over a decade ago. It has fewer than
10 lines of code. Merge it into net/genetlink.h.
In some ways it'd be better to keep the combined header
under linux/ but it would make looking through git history
harder.
Acked-by: Sven Eckelmann <sven@narfation.org>
Link: https://lore.kernel.org/r/20240329175710.291749-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
There are things in linux/genetlink.h which are only used
under net/netlink/. Move them to a new local header.
A new header with just 2 externs isn't great, but alternative
would be to include af_netlink.h in genetlink.c which feels
even worse.
Link: https://lore.kernel.org/r/20240329175710.291749-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We lost ability to unload ipv6 module a long time ago.
Instead of calling expensive inet_twsk_purge() twice,
we can handle all families in one round.
Also remove an extra line added in my prior patch,
per Kuniyuki Iwashima feedback.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/netdev/20240327192934.6843-1-kuniyu@amazon.com/
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240329153203.345203-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
We can change inet_csk() to propagate its argument const qualifier,
thanks to container_of_const().
We have to fix few places that had mistakes, like tcp_bound_rto().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240329144931.295800-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Remove support for the "Crypto usage statistics" feature
(CONFIG_CRYPTO_STATS). This feature does not appear to have ever been
used, and it is harmful because it significantly reduces performance and
is a large maintenance burden.
Covering each of these points in detail:
1. Feature is not being used
Since these generic crypto statistics are only readable using netlink,
it's fairly straightforward to look for programs that use them. I'm
unable to find any evidence that any such programs exist. For example,
Debian Code Search returns no hits except the kernel header and kernel
code itself and translations of the kernel header:
https://codesearch.debian.net/search?q=CRYPTOCFGA_STAT&literal=1&perpkg=1
The patch series that added this feature in 2018
(https://lore.kernel.org/linux-crypto/1537351855-16618-1-git-send-email-clabbe@baylibre.com/)
said "The goal is to have an ifconfig for crypto device." This doesn't
appear to have happened.
It's not clear that there is real demand for crypto statistics. Just
because the kernel provides other types of statistics such as I/O and
networking statistics and some people find those useful does not mean
that crypto statistics are useful too.
Further evidence that programs are not using CONFIG_CRYPTO_STATS is that
it was able to be disabled in RHEL and Fedora as a bug fix
(https://gitlab.com/redhat/centos-stream/src/kernel/centos-stream-9/-/merge_requests/2947).
Even further evidence comes from the fact that there are and have been
bugs in how the stats work, but they were never reported. For example,
before Linux v6.7 hash stats were double-counted in most cases.
There has also never been any documentation for this feature, so it
might be hard to use even if someone wanted to.
2. CONFIG_CRYPTO_STATS significantly reduces performance
Enabling CONFIG_CRYPTO_STATS significantly reduces the performance of
the crypto API, even if no program ever retrieves the statistics. This
primarily affects systems with a large number of CPUs. For example,
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2039576 reported
that Lustre client encryption performance improved from 21.7GB/s to
48.2GB/s by disabling CONFIG_CRYPTO_STATS.
It can be argued that this means that CONFIG_CRYPTO_STATS should be
optimized with per-cpu counters similar to many of the networking
counters. But no one has done this in 5+ years. This is consistent
with the fact that the feature appears to be unused, so there seems to
be little interest in improving it as opposed to just disabling it.
It can be argued that because CONFIG_CRYPTO_STATS is off by default,
performance doesn't matter. But Linux distros tend to error on the side
of enabling options. The option is enabled in Ubuntu and Arch Linux,
and until recently was enabled in RHEL and Fedora (see above). So, even
just having the option available is harmful to users.
3. CONFIG_CRYPTO_STATS is a large maintenance burden
There are over 1000 lines of code associated with CONFIG_CRYPTO_STATS,
spread among 32 files. It significantly complicates much of the
implementation of the crypto API. After the initial submission, many
fixes and refactorings have consumed effort of multiple people to keep
this feature "working". We should be spending this effort elsewhere.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Extend the driver with a new interface to be used for VF live migration.
This allows to create and destroy a qat_mig_dev object that contains
a set of methods to allow to save and restore the state of QAT VF.
This interface will be used by the qat-vfio-pci module.
Signed-off-by: Xin Zeng <xin.zeng@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Stop using lkb structs in the callback tracepoints so that lkb
references are not needed. This prepares for separating lkb
structs from callbacks.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
This is a simple combination of bio_list_merge + bio_list_init
similar to list_splice_init. While it only saves a single
line in a callers, it makes the move all bios from one list to
another and reinitialize the original pattern a lot more obvious
in the callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Matthew Sakai <msakai@redhat.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/20240328084147.2954434-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
suspend/hibernation
Currently, ath11k fails to resume from system suspend/hibernation on some
the x86 host machines with below error message:
```
ath11k_pci 0000:06:00.0: timeout while waiting for restart complete
```
This happens because, ath11k powers down the MHI stack during suspend and
that leads to destruction of the struct device associated with the MHI
channels. And during resume, ath11k calls calling mhi_sync_power_up() to
power up the MHI subsystem and that eventually calls the driver framework's
device_add() API from mhi_create_devices(). But the PM framework blocks the
struct device creation during device_add() and this leads to probe deferral
as below:
```
mhi mhi0_IPCR: Driver qcom_mhi_qrtr force probe deferral
```
The reason for deferring device creation during resume is explained in
dpm_prepare():
/*
* It is unsafe if probing of devices will happen during suspend or
* hibernation and system behavior will be unpredictable in this
* case. So, let's prohibit device's probing here and defer their
* probes instead. The normal behavior will be restored in
* dpm_complete().
*/
Due to the device probe deferral, qcom_mhi_qrtr_probe() API is not getting
called during resume and thus MHI channels are not prepared. So this blocks
the QMI messages from being transferred between ath11k and firmware,
resulting in a firmware initialization failure.
After consulting with Rafael, it was decided to not destroy the struct
device for the MHI channels during system suspend/hibernation because the
device is bound to appear again during resume.
So to achieve this, a new API called mhi_power_down_keep_dev() is
introduced for MHI controllers to keep the struct device when required.
This API is similar to the existing mhi_power_down() API, except that it
keeps the struct device associated with MHI channels instead of destroying
them.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://lore.kernel.org/r/20240305021320.3367-2-quic_bqiang@quicinc.com
[mani: reworded the commit message and subject]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
|
|
Most of the functions that read values return a status and put the value
itself in an a function parameter. Update health reading to match.
As health is not checked for changes as part of the update loop, remove
the read of this from the periodic update loop. This saves I2C/1W
bandwidth. It also means we do not have to cache it, fresh values are
read when requested.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240325203129.150030-6-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Most of the functions that read values return a status and put the value
itself in an a function parameter. Update cycle count reading to match.
As cycle count is not checked for changes as part of the update loop,
remove the read of this from the periodic update loop. This saves I2C/1W
bandwidth. It also means we do not have to cache it, fresh values are
read when requested.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240325203129.150030-5-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Most of the functions that read values return a status and put the value
itself in an a function parameter. Update energy reading to match.
As energy is not checked for changes as part of the update loop,
remove the read of this from the periodic update loop. This saves
I2C/1W bandwidth. It also means we do not have to cache it, fresh
values are read when requested.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240325203129.150030-4-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Most of the functions that read values return a status and put the value
itself in an a function parameter. Update charge reading to match.
As charge state is not checked for changes as part of the update loop,
remove the read of this from the periodic update loop. This saves
I2C/1W bandwidth. It also means we do not have to cache it, fresh
values are read when requested.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240325203129.150030-3-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Most of the functions that read values return a status and put the value
itself in an a function parameter. Update time reading to match.
As time is not checked for changes as part of the update loop, remove
the read of the this from the periodic update loop. This saves
I2C/1W bandwidth. It also means we do not have to cache it, fresh
values are read when requested.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240325203129.150030-2-afd@ti.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
