| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This fixes a regression that broke iwd as well as a divide by zero in
iaa"
* tag 'v6.9-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: iaa - Fix nr_cpus < nr_iaa case
Revert "crypto: pkcs7 - remove sha1 support"
|
|
Add an off-queue flag, WORK_OFFQ_BH, that indicates whether the last
workqueue the work item was on was a BH one. This will be used to test
whether a work item is BH in cancel_sync path to implement atomic
cancel_sync'ing for BH work items.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
|
|
cancel[_delayed]_work_sync() guarantees that it can shut down
self-requeueing work items. To achieve that, it grabs and then holds
WORK_STRUCT_PENDING bit set while flushing the currently executing instance.
As the PENDING bit is set, all queueing attempts including the
self-requeueing ones fail and once the currently executing instance is
flushed, the work item should be idle as long as someone else isn't actively
queueing it.
This means that the cancel_work_sync path may hold the PENDING bit set while
flushing the target work item. This isn't a problem for the queueing path -
it can just fail which is the desired effect. It doesn't affect flush. It
doesn't matter to cancel_work either as it can just report that the work
item has successfully canceled. However, if there's another cancel_work_sync
attempt on the work item, it can't simply fail or report success and that
would breach the guarantee that it should provide. cancel_work_sync has to
wait for and grab that PENDING bit and go through the motions.
WORK_OFFQ_CANCELING and wq_cancel_waitq are what implement this
cancel_work_sync to cancel_work_sync wait mechanism. When a work item is
being canceled, WORK_OFFQ_CANCELING is also set on it and other
cancel_work_sync attempts wait on the bit to be cleared using the wait
queue.
While this works, it's an isolated wart which doesn't jive with the rest of
flush and cancel mechanisms and forces enable_work() and disable_work() to
require a sleepable context, which hampers their usability.
Now that a work item can be disabled, we can use that to block queueing
while cancel_work_sync is in progress. Instead of holding PENDING the bit,
it can temporarily disable the work item, flush and then re-enable it as
that'd achieve the same end result of blocking queueings while canceling and
thus enable canceling of self-requeueing work items.
- WORK_OFFQ_CANCELING and the surrounding mechanims are removed.
- work_grab_pending() is now simpler, no longer has to wait for a blocking
operation and thus can be called from any context.
- With work_grab_pending() simplified, no need to use try_to_grab_pending()
directly. All users are converted to use work_grab_pending().
- __cancel_work_sync() is updated to __cancel_work() with
WORK_CANCEL_DISABLE to cancel and plug racing queueing attempts. It then
flushes and re-enables the work item if necessary.
- These changes allow disable_work() and enable_work() to be called from any
context.
v2: Lai pointed out that mod_delayed_work_on() needs to check the disable
count before queueing the delayed work item. Added
clear_pending_if_disabled() call.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
|
|
While (delayed) work items could be flushed and canceled, there was no way
to prevent them from being queued in the future. While this didn't lead to
functional deficiencies, it sometimes required a bit more effort from the
workqueue users to e.g. sequence shutdown steps with more care.
Workqueue is currently in the process of replacing tasklet which does
support disabling and enabling. The feature is used relatively widely to,
for example, temporarily suppress main path while a control plane operation
(reset or config change) is in progress.
To enable easy conversion of tasklet users and as it seems like an inherent
useful feature, this patch implements disabling and enabling of work items.
- A work item carries 16bit disable count in work->data while not queued.
The access to the count is synchronized by the PENDING bit like all other
parts of work->data.
- If the count is non-zero, the work item cannot be queued. Any attempt to
queue the work item fails and returns %false.
- disable_work[_sync](), enable_work(), disable_delayed_work[_sync]() and
enable_delayed_work() are added.
v3: enable_work() was using local_irq_enable() instead of
local_irq_restore() to undo IRQ-disable by work_grab_pending(). This is
awkward now and will become incorrect as enable_work() will later be
used from IRQ context too. (Lai)
v2: Lai noticed that queue_work_node() wasn't checking the disable count.
Fixed. queue_rcu_work() is updated to trigger warning if the inner work
item is disabled.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
|
|
The cancel[_sync] paths acquire and release WORK_STRUCT_PENDING, and
manipulate WORK_OFFQ_CANCELING. However, they assume that all the OFFQ bit
values except for the pool ID are statically known and don't preserve them,
which is not wrong in the current code as the pool ID and CANCELING are the
only information carried. However, the planned disable/enable support will
add more fields and need them to be preserved.
This patch updates work data handling so that only the bits which need
updating are updated.
- struct work_offq_data is added along with work_offqd_unpack() and
work_offqd_pack_flags() to help manipulating multiple fields contained in
work->data. Note that the helpers look a bit silly right now as there
isn't that much to pack. The next patch will add more.
- mark_work_canceling() which is used only by __cancel_work_sync() is
replaced by open-coded usage of work_offq_data and
set_work_pool_and_keep_pending() in __cancel_work_sync().
- __cancel_work[_sync]() uses offq_data helpers to preserve other OFFQ bits
when clearing WORK_STRUCT_PENDING and WORK_OFFQ_CANCELING at the end.
- This removes all users of get_work_pool_id() which is dropped. Note that
get_work_pool_id() could handle both WORK_STRUCT_PWQ and !WORK_STRUCT_PWQ
cases; however, it was only being called after try_to_grab_pending()
succeeded, in which case WORK_STRUCT_PWQ is never set and thus it's safe
to use work_offqd_unpack() instead.
No behavior changes intended.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Lai Jiangshan <jiangshanlai@gmail.com>
|
|
No in-kernel users of struct rspi_plat_data. If required,
the software nodes should be used for such users. For now
just get rid of it.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://msgid.link/r/20240325142118.3210915-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The RISC-V advanced interrupt architecture (AIA) specification defines
advanced platform-level interrupt controller (APLIC) which has two modes
of operation: 1) Direct mode and 2) MSI mode.
(For more details, refer https://github.com/riscv/riscv-aia)
In APLIC direct-mode, wired interrupts are forwared to CPUs (or HARTs)
as a local external interrupt.
Add a platform irqchip driver for the RISC-V APLIC direct-mode to
support RISC-V platforms having only wired interrupts.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20240307140307.646078-7-apatel@ventanamicro.com
|
|
The RISC-V advanced interrupt architecture (AIA) specification
defines a new MSI controller called incoming message signalled
interrupt controller (IMSIC) which manages MSI on per-HART (or
per-CPU) basis. It also supports IPIs as software injected MSIs.
(For more details refer https://github.com/riscv/riscv-aia)
Add an early irqchip driver for RISC-V IMSIC which sets up the
IMSIC state and provide IPIs.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20240307140307.646078-3-apatel@ventanamicro.com
|
|
The pplcllpl/u can be used to save the Link Connection Linear Link
Position register value to be used for compensation of the LLP register
value in case the counter is not reset (after pause/resume or
stop/start without closing the stream).
The LLP can be used along with PPHCLDP to calculate delay caused by the DSP
processing for HDA links.
Cc: stable@vger.kernel.org # 6.8
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240321130814.4412-17-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Implement a helper function to check if an instruction is
addr_space_cast from as(0) to as(1). Use this helper in the x86 JIT.
Other JITs can use this helper when they add support for this instruction.
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Link: https://lore.kernel.org/r/20240324183226.29674-1-puranjay12@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
In order to activate a link that is currently inactive due to
a negotiated TTLM request, need to first tear down the negotiated
TTLM request.
Add support for sending TTLM teardown request and update the links
state accordingly.
Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240318184907.d480cbf46fcf.Idedad472469d2c27dd2a088cf80a13a1e1cf9b78@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Some devices may not be capable of handling puncturing in 5 GHz
only (vs. the current flag that just removes puncturing support
completely). Add a flag to support such devices: check and then
downgrade the channel width if needed.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240318184907.49759510da7d.I12c5a61f0be512e0c4e574c2f794ef4b37ecaf6b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Update power_type in bss_conf based on Indoor AFC and LPI power types
received in HE 6 GHz operation element on assoc success.
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240318184907.89c25dae34ff.Ifd8b2983f400623ac03dc032fc9a20025c9ca365@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
BSS_CHANGED_MLD_TTLM purpose is to let the driver know that
negotiated TTLM was updated and as a result MLD suspended links
status was change.
Fix the description to better reflect it.
Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240318184907.52b893a70758.I2dcb322b389441f33605fb952450cc2724eb9efd@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Since I keep getting confused about this and asking about it,
update the documentation.
In the future, especially when we add more reasons for a link
to be disabled, we should add a per-link 'disable state' bitmap
instead of maintaining all these bitmaps with subset logic, to
indicate each of the different states separately.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240318184907.a5b24595b1a2.I92dd7d177b25df189b842d3bcddb1f2b13b1de13@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If there was a possibility of an MLE basic STA profile without
subelements, we might reject it because we account for the one
octet for sta_info_len twice (it's part of itself, and in the
fixed portion). Like in ieee80211_mle_reconf_sta_prof_size_ok,
subtract 1 to adjust that.
When reading the elements we did take this into account, and
since there are always elements, this never really mattered.
Fixes: 7b6f08771bf6 ("wifi: ieee80211: Support validating ML station profile length")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240318184907.00bb0b20ed60.I8c41dd6fc14c4b187ab901dea15ade73c79fb98c@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
For simplicity, we may want to pass a NULL element, and
while we should then pass also a zero length, just be a
bit more careful here.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://msgid.link/20240318184907.4d983653cb8d.Ic3ea99b60c61ac2f7d38cb9fd202a03c97a05601@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Fix all of the kernel-doc issues in nl80211.h.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://msgid.link/20240319-kdoc-nl80211-v1-3-549e09d52866@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently kernel-doc raises "warning: bad line:" for several comments
that have invalid multi-line comment style; they are missing the
leading '*'. And checkpatch.pl raises "WARNING: please, no space
before tabs" for a large number of comments which have space then tab
after the leading '*'.
Fix those issues.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://msgid.link/20240319-kdoc-nl80211-v1-2-549e09d52866@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
kernel-doc flagged the following issue:
include/uapi/linux/nl80211.h:6081: warning: expecting prototype for enum nl80211_plink_action. Prototype was for enum plink_actions instead
This is because the documentation doesn't match the code. Normally the
correct fix for such an issue is to modify the documentation to match
the code. However, in this case, since the actual name plink_actions
is not referenced by any code, rename it to nl80211_plink_action to
give it a proper prefix and match the documentation.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://msgid.link/20240319-kdoc-nl80211-v1-1-549e09d52866@quicinc.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Wireless extensions are already disabled if MLO is enabled,
given that we cannot support MLO there with all the hard-
coded assumptions about BSSID etc.
However, the WiFi7 ecosystem is still stabilizing, and some
devices may need MLO disabled while that happens. In that
case, we might end up with a device that supports wext (but
not MLO) in one kernel, and then breaks wext in the future
(by enabling MLO), which is not desirable.
Add a flag to let such drivers/devices disable wext even if
MLO isn't yet enabled.
Cc: stable@vger.kernel.org
Link: https://msgid.link/20240314110951.b50f1dc4ec21.I656ddd8178eedb49dc5c6c0e70f8ce5807afb54f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
If a misfit task is affined to a subset of the possible CPUs, we need to
verify that one of these CPUs can fit it. Otherwise the load balancer
code will continuously trigger needlessly leading the balance_interval
to increase in return and eventually end up with a situation where real
imbalances take a long time to address because of this impossible
imbalance situation.
This can happen in Android world where it's common for background tasks
to be restricted to little cores.
Similarly if we can't fit the biggest core, triggering misfit is
pointless as it is the best we can ever get on this system.
To be able to detect that; we use asym_cap_list to iterate through
capacities in the system to see if the task is able to run at a higher
capacity level based on its p->cpus_ptr. We do that when the affinity
change, a fair task is forked, or when a task switched to fair policy.
We store the max_allowed_capacity in task_struct to allow for cheap
comparison in the fast path.
Improve check_misfit_status() function by removing redundant checks.
misfit_task_load will be 0 if the task can't move to a bigger CPU. And
nohz_balancer_kick() already checks for cpu_check_capacity() before
calling check_misfit_status().
Test:
=====
Add
trace_printk("balance_interval = %lu\n", interval)
in get_sd_balance_interval().
run
if [ "$MASK" != "0" ]; then
adb shell "taskset -a $MASK cat /dev/zero > /dev/null"
fi
sleep 10
// parse ftrace buffer counting the occurrence of each valaue
Where MASK is either:
* 0: no busy task running
* 1: busy task is pinned to 1 cpu; handled today to not cause
misfit
* f: busy task pinned to little cores, simulates busy background
task, demonstrates the problem to be fixed
Results:
========
Note how occurrence of balance_interval = 128 overshoots for MASK = f.
BEFORE
------
MASK=0
1 balance_interval = 175
120 balance_interval = 128
846 balance_interval = 64
55 balance_interval = 63
215 balance_interval = 32
2 balance_interval = 31
2 balance_interval = 16
4 balance_interval = 8
1870 balance_interval = 4
65 balance_interval = 2
MASK=1
27 balance_interval = 175
37 balance_interval = 127
840 balance_interval = 64
167 balance_interval = 63
449 balance_interval = 32
84 balance_interval = 31
304 balance_interval = 16
1156 balance_interval = 8
2781 balance_interval = 4
428 balance_interval = 2
MASK=f
1 balance_interval = 175
1328 balance_interval = 128
44 balance_interval = 64
101 balance_interval = 63
25 balance_interval = 32
5 balance_interval = 31
23 balance_interval = 16
23 balance_interval = 8
4306 balance_interval = 4
177 balance_interval = 2
AFTER
-----
Note how the high values almost disappear for all MASK values. The
system has background tasks that could trigger the problem without
simulate it even with MASK=0.
MASK=0
103 balance_interval = 63
19 balance_interval = 31
194 balance_interval = 8
4827 balance_interval = 4
179 balance_interval = 2
MASK=1
131 balance_interval = 63
1 balance_interval = 31
87 balance_interval = 8
3600 balance_interval = 4
7 balance_interval = 2
MASK=f
8 balance_interval = 127
182 balance_interval = 63
3 balance_interval = 31
9 balance_interval = 16
415 balance_interval = 8
3415 balance_interval = 4
21 balance_interval = 2
Signed-off-by: Qais Yousef <qyousef@layalina.io>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20240324004552.999936-3-qyousef@layalina.io
|
|
Create v4l2-mem2mem helpers for VIDIOC_REMOVE_BUFS ioctl and
make test drivers use it.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
VIDIOC_REMOVE_BUFS ioctl allows to remove buffers from a queue.
The number of buffers to remove in given by count field of
struct v4l2_remove_buffers and the range start at the index
specified in the same structure.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: vidioc-remove-bufs.rst: mention no bufs are freed on error]
|
|
Add a bitmap field to know which of bufs array entries are
used or not.
Remove no more used num_buffers field from queue structure.
Use bitmap_find_next_zero_area() to find the first possible
range when creating new buffers to fill the gaps.
If no suitable range is found try to allocate less buffers
than requested.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
When REMOVE_BUFS will be introduced holes could created in bufs array.
To be able to reuse these unused indices reworking how create->index
is set is mandatory.
Let __vb2_queue_alloc() decide which first index is correct and
forward this to the caller.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Add 'min_reqbufs_allocation' field in the vb2_queue structure so drivers
can specify the minimum number of buffers to allocate when calling
VIDIOC_REQBUFS.
When initializing the queue, v4l2 core makes sure that the following
constraints are respected:
- the minimum number of buffers to allocate must be at least 2 because
one buffer is used by the hardware while the other is being processed
by userspace.
-if the driver needs 'min_queued_buffers' in the queue before calling
start_streaming(), then the minimum requirement is 'min_queued_buffers + 1'
to keep at least one buffer available for userspace.
Simplify __vb2_init_fileio() by using 'min_reqbufs_allocation' directly
to avoid duplicating the minimum number of buffers to allocate computation.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
Do not rely on the number of allocated buffers to know if the
queue is busy but on a flag set when at least one buffer has been allocated
by REQBUFS or CREATE_BUFS ioctl.
The flag is reset when REQBUFS is called with count = 0 or the file
handle is closed.
This is needed because remove buffers feature will be able to remove
all the buffers from a queue while streaming so relying on the number
of allocated buffers in the queue won't be possible.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
|
|
The bindings header for Samsung pin controller DTS pin values (holding
register values in fact) was deprecated in v6.1 kernel in
commit 9d9292576810 ("dt-bindings: pinctrl: samsung: deprecate header
with register constants"). This was enough of time for users to switch
to in-DTS headers, so drop the bindings header.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240312164428.692552-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
From DT point of view, in general, drivers should be asking for a
specific port number because their function is fixed in the binding.
of_graph_get_next_endpoint() doesn't match to this concept.
Simply replace
- of_graph_get_next_endpoint(xxx, NULL);
+ of_graph_get_endpoint_by_regs(xxx, 0, -1);
Link: https://lore.kernel.org/r/20240202174941.GA310089-robh@kernel.org
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
At the moment we cannot instantiate two dmaengine_pcms with the same
parent device, as the components will be named the same, leading to
conflicts.
Add 'name' field to the snd_dmaengine_pcm_config, and use that (if
defined) as the component name instead of deriving the component name
from the device.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://msgid.link/r/20240319-xilinx-dp-audio-v2-1-92d6d3a7ca7e@ideasonboard.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is no use for whole 16-bit for the number of chip select pins.
Drop it to 8 bits.
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://msgid.link/r/20240307195056.4059864-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is the only one user of the pxa2xx_set_spi_info(). Unexport it
and inline to the actual user.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://msgid.link/r/20240307195056.4059864-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is no use for whole 16-bit for the number of chip select pins.
Drop it to 8 bits and reshuffle the data structure layout to avoid
unnecessary paddings.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Link: https://msgid.link/r/20240308162920.46816-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
xilinx_spi.h is mnissing inclusion and forward declaration, add them.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://msgid.link/r/20240308162920.46816-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
While updating the data structure layout the kernel documentation
became outdated. Synchronize kernel documentation with the actual
data structure layout.
Fixes: 1dd46599f83a ("spi: xilinx: add force_irq for QSPI mode")
Fixes: 082339bc63cc ("spi: spi-xilinx: Add run run-time endian detection")
Reviewed-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://msgid.link/r/20240308162920.46816-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Adding support for new pmic pca9451a.
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Link: https://msgid.link/r/20240318095633.4079027-3-joy.zou@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull more powerpc updates from Michael Ellerman:
- Handle errors in mark_rodata_ro() and mark_initmem_nx()
- Make struct crash_mem available without CONFIG_CRASH_DUMP
Thanks to Christophe Leroy and Hari Bathini.
* tag 'powerpc-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/kdump: Split KEXEC_CORE and CRASH_DUMP dependency
powerpc/kexec: split CONFIG_KEXEC_FILE and CONFIG_CRASH_DUMP
kexec/kdump: make struct crash_mem available without CONFIG_CRASH_DUMP
powerpc: Handle error in mark_rodata_ro() and mark_initmem_nx()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull more hardening updates from Kees Cook:
- CONFIG_MEMCPY_SLOW_KUNIT_TEST is no longer needed (Guenter Roeck)
- Fix needless UTF-8 character in arch/Kconfig (Liu Song)
- Improve __counted_by warning message in LKDTM (Nathan Chancellor)
- Refactor DEFINE_FLEX() for default use of __counted_by
- Disable signed integer overflow sanitizer on GCC < 8
* tag 'hardening-v6.9-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
lkdtm/bugs: Improve warning message for compilers without counted_by support
overflow: Change DEFINE_FLEX to take __counted_by member
Revert "kunit: memcpy: Split slow memcpy tests into MEMCPY_SLOW_KUNIT_TEST"
arch/Kconfig: eliminate needless UTF-8 character in Kconfig help
ubsan: Disable signed integer overflow sanitizer on GCC < 8
|
|
Factor out logic for converting numa node to hv_proximity_domain_info
into a helper function.
Change hv_proximity_domain_info to a struct to improve readability.
While at it, rename hv_add_logical_processor_* structs to the correct
hv_input_/hv_output_ prefix, and remove the flags field which is not
present in the ABI.
Signed-off-by: Nuno Das Neves <nunodasneves@linux.microsoft.com>
Reviewed-by: Wei Liu <wei.liu@kernel.org>
Link: https://lore.kernel.org/r/1711141826-9458-1-git-send-email-nunodasneves@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1711141826-9458-1-git-send-email-nunodasneves@linux.microsoft.com>
|
|
The norm should be flexible array structures with __counted_by
annotations, so DEFINE_FLEX() is updated to expect that. Rename
the non-annotated version to DEFINE_RAW_FLEX(), and update the
few existing users. Additionally add selftests for the macros.
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20240306235128.it.933-kees@kernel.org
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
Pull more SCSI updates from James Bottomley:
"The vfs has long had a write lifetime hint mechanism that gives the
expected longevity on storage of the data being written. f2fs was the
original consumer of this and used the hint for flash data placement
(mostly to avoid write amplification by placing objects with similar
lifetimes in the same erase block).
More recently the SCSI based UFS (Universal Flash Storage) drivers
have wanted to take advantage of this as well, for the same reasons as
f2fs, necessitating plumbing the write hints through the block layer
and then adding it to the SCSI core.
The vfs write_hints already taken plumbs this as far as block and this
completes the SCSI core enabling based on a recently agreed reuse of
the old write command group number. The additions to the scsi_debug
driver are for emulating this property so we can run tests on it in
the absence of an actual UFS device"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: scsi_debug: Maintain write statistics per group number
scsi: scsi_debug: Implement GET STREAM STATUS
scsi: scsi_debug: Implement the IO Advice Hints Grouping mode page
scsi: scsi_debug: Allocate the MODE SENSE response from the heap
scsi: scsi_debug: Rework subpage code error handling
scsi: scsi_debug: Rework page code error handling
scsi: scsi_debug: Support the block limits extension VPD page
scsi: scsi_debug: Reduce code duplication
scsi: sd: Translate data lifetime information
scsi: scsi_proto: Add structures and constants related to I/O groups and streams
scsi: core: Query the Block Limits Extension VPD page
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
- Support for various vector-accelerated crypto routines
- Hibernation is now enabled for portable kernel builds
- mmap_rnd_bits_max is larger on systems with larger VAs
- Support for fast GUP
- Support for membarrier-based instruction cache synchronization
- Support for the Andes hart-level interrupt controller and PMU
- Some cleanups around unaligned access speed probing and Kconfig
settings
- Support for ACPI LPI and CPPC
- Various cleanus related to barriers
- A handful of fixes
* tag 'riscv-for-linus-6.9-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (66 commits)
riscv: Fix syscall wrapper for >word-size arguments
crypto: riscv - add vector crypto accelerated AES-CBC-CTS
crypto: riscv - parallelize AES-CBC decryption
riscv: Only flush the mm icache when setting an exec pte
riscv: Use kcalloc() instead of kzalloc()
riscv/barrier: Add missing space after ','
riscv/barrier: Consolidate fence definitions
riscv/barrier: Define RISCV_FULL_BARRIER
riscv/barrier: Define __{mb,rmb,wmb}
RISC-V: defconfig: Enable CONFIG_ACPI_CPPC_CPUFREQ
cpufreq: Move CPPC configs to common Kconfig and add RISC-V
ACPI: RISC-V: Add CPPC driver
ACPI: Enable ACPI_PROCESSOR for RISC-V
ACPI: RISC-V: Add LPI driver
cpuidle: RISC-V: Move few functions to arch/riscv
riscv: Introduce set_compat_task() in asm/compat.h
riscv: Introduce is_compat_thread() into compat.h
riscv: add compile-time test into is_compat_task()
riscv: Replace direct thread flag check with is_compat_task()
riscv: Improve arch_get_mmap_end() macro
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Add objtool support for LoongArch
- Add ORC stack unwinder support for LoongArch
- Add kernel livepatching support for LoongArch
- Select ARCH_HAS_CURRENT_STACK_POINTER in Kconfig
- Select HAVE_ARCH_USERFAULTFD_MINOR in Kconfig
- Some bug fixes and other small changes
* tag 'loongarch-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch/crypto: Clean up useless assignment operations
LoongArch: Define the __io_aw() hook as mmiowb()
LoongArch: Remove superfluous flush_dcache_page() definition
LoongArch: Move {dmw,tlb}_virt_to_page() definition to page.h
LoongArch: Change __my_cpu_offset definition to avoid mis-optimization
LoongArch: Select HAVE_ARCH_USERFAULTFD_MINOR in Kconfig
LoongArch: Select ARCH_HAS_CURRENT_STACK_POINTER in Kconfig
LoongArch: Add kernel livepatching support
LoongArch: Add ORC stack unwinder support
objtool: Check local label in read_unwind_hints()
objtool: Check local label in add_dead_ends()
objtool/LoongArch: Enable orc to be built
objtool/x86: Separate arch-specific and generic parts
objtool/LoongArch: Implement instruction decoder
objtool/LoongArch: Enable objtool to be built
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev updates from Helge Deller:
- Allow console fonts up to 64x128 pixels (Samuel Thibault)
- Prevent division-by-zero in fb monitor code (Roman Smirnov)
- Drop Renesas ARM platforms from Mobile LCDC framebuffer driver (Geert
Uytterhoeven)
- Various code cleanups in viafb, uveafb and mb862xxfb drivers by
Aleksandr Burakov, Li Zhijian and Michael Ellerman
* tag 'fbdev-for-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: panel-tpo-td043mtea1: Convert sprintf() to sysfs_emit()
fbmon: prevent division by zero in fb_videomode_from_videomode()
fbcon: Increase maximum font width x height to 64 x 128
fbdev: viafb: fix typo in hw_bitblt_1 and hw_bitblt_2
fbdev: mb862xxfb: Fix defined but not used error
fbdev: uvesafb: Convert sprintf/snprintf to sysfs_emit
fbdev: Restrict FB_SH_MOBILE_LCDC to SuperH
|
|
This reverts commit 16ab7cb5825fc3425c16ad2c6e53d827f382d7c6 because it
broke iwd. iwd uses the KEYCTL_PKEY_* UAPIs via its dependency libell,
and apparently it is relying on SHA-1 signature support. These UAPIs
are fairly obscure, and their documentation does not mention which
algorithms they support. iwd really should be using a properly
supported userspace crypto library instead. Regardless, since something
broke we have to revert the change.
It may be possible that some parts of this commit can be reinstated
without breaking iwd (e.g. probably the removal of MODULE_SIG_SHA1), but
for now this just does a full revert to get things working again.
Reported-by: Karel Balej <balejk@matfyz.cz>
Closes: https://lore.kernel.org/r/CZSHRUIJ4RKL.34T4EASV5DNJM@matfyz.cz
Cc: Dimitri John Ledkov <dimitri.ledkov@canonical.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Tested-by: Karel Balej <balejk@matfyz.cz>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add a helper function intel_nhlt_ssp_device_type() to detect the type
of specific SSP port. The result is nhlt_device_type enum type which
could be NHLT_DEVICE_BT or NHLT_DEVICE_I2S.
Signed-off-by: Brent Lu <brent.lu@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Message-ID: <20231127120657.19764-2-peter.ujfalusi@linux.intel.com>
|
|
When a static_key is marked ro_after_init, its state will never change
(after init), therefore jump_label_update() will never need to iterate
the entries, and thus module load won't actually need to track this --
avoiding the static_key::next write.
Therefore, mark these keys such that jump_label_add_module() might
recognise them and avoid the modification.
Use the special state: 'static_key_linked(key) && !static_key_mod(key)'
to denote such keys.
jump_label_add_module() does not exist under CONFIG_JUMP_LABEL=n, so the
newly-introduced jump_label_init_ro() can be defined as a nop for that
configuration.
[ mingo: Renamed jump_label_ro() to jump_label_init_ro() ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20240313180106.2917308-2-vschneid@redhat.com
|
|
The stack of a task has been separated from the memory of a task_struct
struture for a long time on x86, as a result __{start,end}_init_task no
longer mark the start and end of the init_task structure, but its stack
only.
Rename __{start,end}_init_task to __{start,end}_init_stack.
Note other architectures are not affected because __{start,end}_init_task
are used on x86 only.
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20240322081616.3346181-1-xin@zytor.com
|
