| Age | Commit message (Collapse) | Author |
|---|
|
When no synflood occurs, the synflood timestamp isn't updated.
Therefore it can be so old that time_after32() can consider it to be
in the future.
That's a problem for tcp_synq_no_recent_overflow() as it may report
that a recent overflow occurred while, in fact, it's just that jiffies
has grown past 'last_overflow' + TCP_SYNCOOKIE_VALID + 2^31.
Spurious detection of recent overflows lead to extra syncookie
verification in cookie_v[46]_check(). At that point, the verification
should fail and the packet dropped. But we should have dropped the
packet earlier as we didn't even send a syncookie.
Let's refine tcp_synq_no_recent_overflow() to report a recent overflow
only if jiffies is within the
[last_overflow, last_overflow + TCP_SYNCOOKIE_VALID] interval. This
way, no spurious recent overflow is reported when jiffies wraps and
'last_overflow' becomes in the future from the point of view of
time_after32().
However, if jiffies wraps and enters the
[last_overflow, last_overflow + TCP_SYNCOOKIE_VALID] interval (with
'last_overflow' being a stale synflood timestamp), then
tcp_synq_no_recent_overflow() still erroneously reports an
overflow. In such cases, we have to rely on syncookie verification
to drop the packet. We unfortunately have no way to differentiate
between a fresh and a stale syncookie timestamp.
In practice, using last_overflow as lower bound is problematic.
If the synflood timestamp is concurrently updated between the time
we read jiffies and the moment we store the timestamp in
'last_overflow', then 'now' becomes smaller than 'last_overflow' and
tcp_synq_no_recent_overflow() returns true, potentially dropping a
valid syncookie.
Reading jiffies after loading the timestamp could fix the problem,
but that'd require a memory barrier. Let's just accommodate for
potential timestamp growth instead and extend the interval using
'last_overflow - HZ' as lower bound.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If no synflood happens for a long enough period of time, then the
synflood timestamp isn't refreshed and jiffies can advance so much
that time_after32() can't accurately compare them any more.
Therefore, we can end up in a situation where time_after32(now,
last_overflow + HZ) returns false, just because these two values are
too far apart. In that case, the synflood timestamp isn't updated as
it should be, which can trick tcp_synq_no_recent_overflow() into
rejecting valid syncookies.
For example, let's consider the following scenario on a system
with HZ=1000:
* The synflood timestamp is 0, either because that's the timestamp
of the last synflood or, more commonly, because we're working with
a freshly created socket.
* We receive a new SYN, which triggers synflood protection. Let's say
that this happens when jiffies == 2147484649 (that is,
'synflood timestamp' + HZ + 2^31 + 1).
* Then tcp_synq_overflow() doesn't update the synflood timestamp,
because time_after32(2147484649, 1000) returns false.
With:
- 2147484649: the value of jiffies, aka. 'now'.
- 1000: the value of 'last_overflow' + HZ.
* A bit later, we receive the ACK completing the 3WHS. But
cookie_v[46]_check() rejects it because tcp_synq_no_recent_overflow()
says that we're not under synflood. That's because
time_after32(2147484649, 120000) returns false.
With:
- 2147484649: the value of jiffies, aka. 'now'.
- 120000: the value of 'last_overflow' + TCP_SYNCOOKIE_VALID.
Of course, in reality jiffies would have increased a bit, but this
condition will last for the next 119 seconds, which is far enough
to accommodate for jiffie's growth.
Fix this by updating the overflow timestamp whenever jiffies isn't
within the [last_overflow, last_overflow + HZ] range. That shouldn't
have any performance impact since the update still happens at most once
per second.
Now we're guaranteed to have fresh timestamps while under synflood, so
tcp_synq_no_recent_overflow() can safely use it with time_after32() in
such situations.
Stale timestamps can still make tcp_synq_no_recent_overflow() return
the wrong verdict when not under synflood. This will be handled in the
next patch.
For 64 bits architectures, the problem was introduced with the
conversion of ->tw_ts_recent_stamp to 32 bits integer by commit
cca9bab1b72c ("tcp: use monotonic timestamps for PAWS").
The problem has always been there on 32 bits architectures.
Fixes: cca9bab1b72c ("tcp: use monotonic timestamps for PAWS")
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
With indirect blocks, a driver can register for callbacks from a device
that is does not 'own', for example, a tunnel device. When registering to
or unregistering from a new device, a callback is triggered to generate
a bind/unbind event. This, in turn, allows the driver to receive any
existing rules or to properly clean up installed rules.
When first added, it was assumed that all indirect block registrations
would be for ingress offloads. However, the NFP driver can, in some
instances, support clsact qdisc binds for egress offload.
Change the name of the indirect block callback command in flow_offload to
remove the 'ingress' identifier from it. While this does not change
functionality, a follow up patch will implement a more more generic
callback than just those currently just supporting ingress offload.
Fixes: 4d12ba42787b ("nfp: flower: allow offloading of matches on 'internal' ports")
Signed-off-by: John Hurley <john.hurley@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull NVMe fixes from Keith
* 'nvme/for-5.5' of git://git.infradead.org/nvme:
nvme/pci: Fix read queue count
nvme/pci Limit write queue sizes to possible cpus
nvme/pci: Fix write and poll queue types
nvme/pci: Remove last_cq_head
nvme: Namepace identification descriptor list is optional
nvme-fc: fix double-free scenarios on hw queues
nvme: else following return is not needed
nvme: add error message on mismatching controller ids
nvme_fc: add module to ops template to allow module references
nvmet-loop: Avoid preallocating big SGL for data
nvme-fc: Avoid preallocating big SGL for data
nvme-rdma: Avoid preallocating big SGL for data
|
|
Adding the recently added EHL/JSL PCI ids.
BSpec: 29153
Cc: James Ausmus <james.ausmus@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191203211308.109703-1-jose.souza@intel.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Olof Johansson:
"A set of fixes that we've merged late, but for the most part that have
been sitting in -next for a while through platform maintainer trees:
- Fixes to suspend/resume on Tegra, caused by the added features this
merge window
- Cleanups and minor fixes to TI additions this merge window
- Tee fixes queued up late before the merge window, included here.
- A handful of other fixlets
There's also a refresh of the shareed config files (multi_v* on
32-bit, and defconfig on 64-bit), to avoid conflicts when we get new
contributions"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (32 commits)
ARM: multi_v7_defconfig: Restore debugfs support
ARM: defconfig: re-run savedefconfig on multi_v* configs
arm64: defconfig: re-run savedefconfig
ARM: pxa: Fix resource properties
soc: mediatek: cmdq: fixup wrong input order of write api
soc: aspeed: Fix snoop_file_poll()'s return type
MAINTAINERS: Switch to Marvell addresses
MAINTAINERS: update Cavium ThunderX drivers
Revert "arm64: dts: juno: add dma-ranges property"
MAINTAINERS: Make Nicolas Saenz Julienne the new bcm2835 maintainer
firmware: arm_scmi: Avoid double free in error flow
arm64: dts: juno: Fix UART frequency
ARM: dts: Fix sgx sysconfig register for omap4
arm: socfpga: execute cold reboot by default
ARM: dts: Fix vcsi regulator to be always-on for droid4 to prevent hangs
ARM: dts: dra7: fix cpsw mdio fck clock
ARM: dts: am57xx-beagle-x15: Update pinmux name to ddr_3_3v
ARM: dts: omap3-tao3530: Fix incorrect MMC card detection GPIO polarity
soc/tegra: pmc: Add reset sources and levels on Tegra194
soc/tegra: pmc: Add missing IRQ callbacks on Tegra194
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull more powerpc updates from Michael Ellerman:
"A few commits splitting the KASAN instrumented bitops header in three,
to match the split of the asm-generic bitops headers.
This is needed on powerpc because we use the generic bitops for the
non-atomic case only, whereas the existing KASAN instrumented bitops
assume all the underlying operations are provided by the arch as
arch_foo() versions.
Thanks to: Daniel Axtens & Christophe Leroy"
* tag 'powerpc-5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
docs/core-api: Remove possibly confusing sub-headings from Bit Operations
powerpc: support KASAN instrumentation of bitops
kasan: support instrumented bitops combined with generic bitops
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull more sound updates from Takashi Iwai:
"A few last-minute updates, most of them are the regression fixes:
- AMD HD-audio HDMI runtime PM improvements
- Fixes for HD-audio HDMI regressions wrt DP-MST
- A regression fix for the previous aloop enhancement
- A fix for a long-time problem in PCM OSS layer that was spotted by
fuzzer now
- A few HD-audio quirks"
* tag 'sound-fix-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: pcm: oss: Avoid potential buffer overflows
ALSA: hda: hdmi - Keep old slot assignment behavior for Intel platforms
ALSA: hda: Modify stream stripe mask only when needed
ALSA: hda - fixup for the bass speaker on Lenovo Carbon X1 7th gen
ALSA: hda: hdmi - preserve non-MST PCM routing for Intel platforms
ALSA: hda: hdmi - fix kernel oops caused by invalid PCM idx
ALSA: hda/realtek - Fix inverted bass GPIO pin on Acer 8951G
ALSA: hda/realtek - Dell headphone has noise on unmute for ALC236
ALSA: hda: hdmi - fix regression in connect list handling
ALSA: aloop: Avoid pointer dereference before null-check
ALSA: hda/hdmi - enable automatic runtime pm for AMD HDMI codecs by default
ALSA: hda/hdmi - enable runtime pm for newer AMD display audio
ALSA: hda/hdmi - Add new pci ids for AMD GPU display audio
ALSA: hda/hdmi - fix vgaswitcheroo detection for AMD
|
|
Pull more drm updates from Dave Airlie:
"Rob pointed out I missed his pull request for msm-next, it's been in
next for a while outside of my tree so shouldn't cause any unexpected
issues, it has some OCMEM support in drivers/soc that is acked by
other maintainers as it's outside my tree.
Otherwise it's a usual fixes pull, i915, amdgpu, the main ones, with
some tegra, omap, mgag200 and one core fix.
Summary:
msm-next:
- OCMEM support for a3xx and a4xx GPUs.
- a510 support + display support
core:
- mst payload deletion fix
i915:
- uapi alignment fix
- fix for power usage regression due to security fixes
- change default preemption timeout to 640ms from 100ms
- EHL voltage level display fixes
- TGL DGL PHY fix
- gvt - MI_ATOMIC cmd parser fix, CFL non-priv warning
- CI spotted deadlock fix
- EHL port D programming fix
amdgpu:
- VRAM lost fixes on BACO for CI/VI
- navi14 DC fixes
- misc SR-IOV, gfx10 fixes
- XGMI fixes for arcturus
- SRIOV fixes
amdkfd:
- KFD on ppc64le enabled
- page table optimisations
radeon:
- fix for r1xx/2xx register checker.
tegra:
- displayport regression fixes
- DMA API regression fixes
mgag200:
- fix devices that can't scanout except at 0 addr
omap:
- fix dma_addr refcounting"
* tag 'drm-next-2019-12-06' of git://anongit.freedesktop.org/drm/drm: (100 commits)
drm/dp_mst: Correct the bug in drm_dp_update_payload_part1()
drm/omap: fix dma_addr refcounting
drm/tegra: Run hub cleanup on ->remove()
drm/tegra: sor: Make the +5V HDMI supply optional
drm/tegra: Silence expected errors on IOMMU attach
drm/tegra: vic: Export module device table
drm/tegra: sor: Implement system suspend/resume
drm/tegra: Use proper IOVA address for cursor image
drm/tegra: gem: Remove premature import restrictions
drm/tegra: gem: Properly pin imported buffers
drm/tegra: hub: Remove bogus connection mutex check
ia64: agp: Replace empty define with do while
agp: Add bridge parameter documentation
agp: remove unused variable num_segments
agp: move AGPGART_MINOR to include/linux/miscdevice.h
agp: remove unused variable size in agp_generic_create_gatt_table
drm/dp_mst: Fix build on systems with STACKTRACE_SUPPORT=n
drm/radeon: fix r1xx/r2xx register checker for POT textures
drm/amdgpu: fix GFX10 missing CSIB set(v3)
drm/amdgpu: should stop GFX ring in hw_fini
...
|
|
Pull more block and io_uring updates from Jens Axboe:
"I wasn't expecting this to be so big, and if I was, I would have used
separate branches for this. Going forward I'll be doing separate
branches for the current tree, just like for the next kernel version
tree. In any case, this contains:
- Series from Christoph that fixes an inherent race condition with
zoned devices and revalidation.
- null_blk zone size fix (Damien)
- Fix for a regression in this merge window that caused busy spins by
sending empty disk uevents (Eric)
- Fix for a regression in this merge window for bfq stats (Hou)
- Fix for io_uring creds allocation failure handling (me)
- io_uring -ERESTARTSYS send/recvmsg fix (me)
- Series that fixes the need for applications to retain state across
async request punts for io_uring. This one is a bit larger than I
would have hoped, but I think it's important we get this fixed for
5.5.
- connect(2) improvement for io_uring, handling EINPROGRESS instead
of having applications needing to poll for it (me)
- Have io_uring use a hash for poll requests instead of an rbtree.
This turned out to work much better in practice, so I think we
should make the switch now. For some workloads, even with a fair
amount of cancellations, the insertion sort is just too expensive.
(me)
- Various little io_uring fixes (me, Jackie, Pavel, LimingWu)
- Fix for brd unaligned IO, and a warning for the future (Ming)
- Fix for a bio integrity data leak (Justin)
- bvec_iter_advance() improvement (Pavel)
- Xen blkback page unmap fix (SeongJae)
The major items in here are all well tested, and on the liburing side
we continue to add regression and feature test cases. We're up to 50
topic cases now, each with anywhere from 1 to more than 10 cases in
each"
* tag 'for-linus-20191205' of git://git.kernel.dk/linux-block: (33 commits)
block: fix memleak of bio integrity data
io_uring: fix a typo in a comment
bfq-iosched: Ensure bio->bi_blkg is valid before using it
io_uring: hook all linked requests via link_list
io_uring: fix error handling in io_queue_link_head
io_uring: use hash table for poll command lookups
io-wq: clear node->next on list deletion
io_uring: ensure deferred timeouts copy necessary data
io_uring: allow IO_SQE_* flags on IORING_OP_TIMEOUT
null_blk: remove unused variable warning on !CONFIG_BLK_DEV_ZONED
brd: warn on un-aligned buffer
brd: remove max_hw_sectors queue limit
xen/blkback: Avoid unmapping unmapped grant pages
io_uring: handle connect -EINPROGRESS like -EAGAIN
block: set the zone size in blk_revalidate_disk_zones atomically
block: don't handle bio based drivers in blk_revalidate_disk_zones
block: allocate the zone bitmaps lazily
block: replace seq_zones_bitmap with conv_zones_bitmap
block: simplify blkdev_nr_zones
block: remove the empty line at the end of blk-zoned.c
...
|
|
Pull vfs d_inode/d_flags memory ordering fixes from Al Viro:
"Fallout from tree-wide audit for ->d_inode/->d_flags barriers use.
Basically, the problem is that negative pinned dentries require
careful treatment - unless ->d_lock is locked or parent is held at
least shared, another thread can make them positive right under us.
Most of the uses turned out to be safe - the main surprises as far as
filesystems are concerned were
- race in dget_parent() fastpath, that might end up with the caller
observing the returned dentry _negative_, due to insufficient
barriers. It is positive in memory, but we could end up seeing the
wrong value of ->d_inode in CPU cache. Fixed.
- manual checks that result of lookup_one_len_unlocked() is positive
(and rejection of negatives). Again, insufficient barriers (we
might end up with inconsistent observed values of ->d_inode and
->d_flags). Fixed by switching to a new primitive that does the
checks itself and returns ERR_PTR(-ENOENT) instead of a negative
dentry. That way we get rid of boilerplate converting negatives
into ERR_PTR(-ENOENT) in the callers and have a single place to
deal with the barrier-related mess - inside fs/namei.c rather than
in every caller out there.
The guts of pathname resolution *do* need to be careful - the race
found by Ritesh is real, as well as several similar races.
Fortunately, it turns out that we can take care of that with fairly
local changes in there.
The tree-wide audit had not been fun, and I hate the idea of repeating
it. I think the right approach would be to annotate the places where
we are _not_ guaranteed ->d_inode/->d_flags stability and have sparse
catch regressions. But I'm still not sure what would be the least
invasive way of doing that and it's clearly the next cycle fodder"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
fs/namei.c: fix missing barriers when checking positivity
fix dget_parent() fastpath race
new helper: lookup_positive_unlocked()
fs/namei.c: pull positivity check into follow_managed()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Few ti-sysc related fixes for v5.5 merge window
Just few minor changes that can be merged when suitable, but would
be good to have these in v5.5-rc1 to remove dependencies between branches
for more changes later on in v5.6:
- Add quirk handling for AESS (Audio Engine Sub System)
- We want to drop the useless gptimer option for omap4 as there are local
timers
- A minor error path handling improvment for sysc_child_add_named_clock()
that will make further patching a bit easier
* tag 'omap-for-v5.5/ti-sysc-late-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
bus: ti-sysc: Adjust exception handling in sysc_child_add_named_clock()
ARM: OMAP2+: Drop useless gptimer option for omap4
bus: ti-sysc: Add module enable quirk for audio AESS
Link: https://lore.kernel.org/r/pull-1574273726-31367@atomide.com
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
The fake offset is going to stay, so change the calling convention for
drm_gem_object_funcs.mmap to include the fake offset. Update all users
accordingly.
Note that this reverts 83b8a6f242ea ("drm/gem: Fix mmap fake offset
handling for drm_gem_object_funcs.mmap") and on top then adds the fake
offset to drm_gem_prime_mmap to make sure all paths leading to
obj->funcs->mmap are consistent.
v3: move fake-offset tweak in drm_gem_prime_mmap() so we have this code
only once in the function (Rob Herring).
Fixes: 83b8a6f242ea ("drm/gem: Fix mmap fake offset handling for drm_gem_object_funcs.mmap")
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20191127092523.5620-2-kraxel@redhat.com
|
|
With all pr_warning are removed, saftely drop pr_warning definition.
Link: http://lkml.kernel.org/r/20191128004752.35268-4-wangkefeng.wang@huawei.com
To: joe@perches.com
To: linux-kernel@vger.kernel.org
Cc: gregkh@linuxfoundation.org
Cc: tj@kernel.org
Cc: arnd@arndb.de
Cc: sergey.senozhatsky@gmail.com
Cc: rostedt@goodmis.org
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
|
|
FEC is supported since DP 1.4, and it was expanded for LT-tunable in DP
1.4a. This commit adds the address registers for
FEC_ERROR_COUNT_PHY_REPEATER1 and FEC_CAPABILITY_PHY_REPEATER1.
Cc: Abdoulaye Berthe <Abdoulaye.Berthe@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Abdoulaye Berthe <Abdoulaye.Berthe@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reviewed-by: Zhan Liu <zhan.liu@amd.com>
Signed-off-by: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191205135856.232784-1-Rodrigo.Siqueira@amd.com
|
|
Commit d7cd0e053b17 introduced a change at DP_DSC_THROUGHPUT_MODE_0_170
which is not aligned with the spec. This commit replace 15 << 4 by 15 <<
0 for DP_DSC_THROUGHPUT_MODE_0_170 in order to make it follow the
specification.
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Nikola Cornij <nikola.cornij@amd.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191021150345.igdye4kv35nsk4ox@outlook.office365.com
|
|
Pull ceph updates from Ilya Dryomov:
"The two highlights are a set of improvements to how rbd read-only
mappings are handled and a conversion to the new mount API (slightly
complicated by the fact that we had a common option parsing framework
that called out into rbd and the filesystem instead of them calling
into it).
Also included a few scattered fixes and a MAINTAINERS update for rbd,
adding Dongsheng as a reviewer"
* tag 'ceph-for-5.5-rc1' of git://github.com/ceph/ceph-client:
libceph, rbd, ceph: convert to use the new mount API
rbd: ask for a weaker incompat mask for read-only mappings
rbd: don't query snapshot features
rbd: remove snapshot existence validation code
rbd: don't establish watch for read-only mappings
rbd: don't acquire exclusive lock for read-only mappings
rbd: disallow read-write partitions on images mapped read-only
rbd: treat images mapped read-only seriously
rbd: introduce RBD_DEV_FLAG_READONLY
rbd: introduce rbd_is_snap()
ceph: don't leave ino field in ceph_mds_request_head uninitialized
ceph: tone down loglevel on ceph_mdsc_build_path warning
rbd: update MAINTAINERS info
ceph: fix geting random mds from mdsmap
rbd: fix spelling mistake "requeueing" -> "requeuing"
ceph: make several helper accessors take const pointers
libceph: drop unnecessary check from dispatch() in mon_client.c
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull modules updates from Jessica Yu:
"Summary of modules changes for the 5.5 merge window:
- Refactor include/linux/export.h and remove code duplication between
EXPORT_SYMBOL and EXPORT_SYMBOL_NS to make it more readable.
The most notable change is that no namespace is represented by an
empty string "" rather than NULL.
- Fix a module load/unload race where waiter(s) trying to load the
same module weren't being woken up when a module finally goes away"
* tag 'modules-for-v5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
kernel/module.c: wakeup processes in module_wq on module unload
moduleparam: fix parameter description mismatch
export: avoid code duplication in include/linux/export.h
|
|
Pull ARM Device-tree updates from Olof Johansson:
"As always, the bulk of updates. Some of the news this cycle:
New SoC descriptions:
- Broadcom BCM2711
- Amlogic Meson A1 and G12
- Freescale S32V234
- Marvell Armada AP807/AP807-quad and CP115
- Realtek RTD1293 and RTD1296
- Rockchip RK3308
New boards and platforms:
- Allwinner: NanoPi Duo2
- Amlogic: Ugoos am6
- Atmel at91: Overkiz Kizbox2/4
- Broadcom: RPi4, Luxul XWC-2000
- Marvell: New Espressobin flavor
- NXP: i.MX8MN LPDDR4 EVK, i.MX8QXP Colibri, S32V234 EVB, Netronix
E60K02 and Kobo Clara HD, Kontron N6311 and N6411, OPOS6UL and
OPOS6ULDev
- Renesas: Salvator-XS
- Rockchip: Beelink A1 (rk3308), rk3308 eval boards, rk3399-roc-pc"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (653 commits)
ARM: dts: logicpd-torpedo: Disable USB Host
arm: dts: mt6323: add keys, power-controller, rtc and codec
arm64: dts: mt8183: add systimer0 device node
dt-bindings: mediatek: update bindings for MT8183 systimer
arm64: dts: rockchip: fix sdmmc detection on boot on rk3328-roc-cc
arm64: dts: rockchip: Split rk3399-roc-pc for with and without mezzanine board.
arm64: dts: rockchip: Add Beelink A1
dt-bindings: ARM: rockchip: Add Beelink A1
arm64: dts: rockchip: Add RK3328 audio pipelines
arm64: dts: ti: k3-j721e-common-proc-board: Add USB ports
arm64: dts: ti: k3-j721e-main: add USB controller nodes
ARM: dts: aspeed-g6: Add timer description
ARM: dts: aspeed: ast2600evb: Enable i2c buses
ARM: dts: at91: add a dts and dtsi file for kizbox2 based boards
dt-bindings: arm: at91: Document Kizbox2-2 board binding
arm64: dts: meson-gx: fix i2c compatible
arm64: dts: meson-gx: cec node should be disabled by default
arm64: dts: meson-g12b-odroid-n2: add missing amlogic, s922x compatible
arm64: dts: meson-gxm: fix gpu irq order
arm64: dts: meson-g12a: fix gpu irq order
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Olof Johansson:
"Various driver updates for platforms:
- A larger set of work on Tegra 2/3 around memory controller and
regulator features, some fuse cleanups, etc..
- MMP platform drivers, in particular for USB PHY, and other smaller
additions.
- Samsung Exynos 5422 driver for DMC (dynamic memory configuration),
and ASV (adaptive voltage), allowing the platform to run at more
optimal operating points.
- Misc refactorings and support for RZ/G2N and R8A774B1 from Renesas
- Clock/reset control driver for TI/OMAP
- Meson-A1 reset controller support
- Qualcomm sdm845 and sda845 SoC IDs for socinfo"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (150 commits)
firmware: arm_scmi: Fix doorbell ring logic for !CONFIG_64BIT
soc: fsl: add RCPM driver
dt-bindings: fsl: rcpm: Add 'little-endian' and update Chassis definition
memory: tegra: Consolidate registers definition into common header
memory: tegra: Ensure timing control debug features are disabled
memory: tegra: Introduce Tegra30 EMC driver
memory: tegra: Do not handle error from wait_for_completion_timeout()
memory: tegra: Increase handshake timeout on Tegra20
memory: tegra: Print a brief info message about EMC timings
memory: tegra: Pre-configure debug register on Tegra20
memory: tegra: Include io.h instead of iopoll.h
memory: tegra: Adapt for Tegra20 clock driver changes
memory: tegra: Don't set EMC rate to maximum on probe for Tegra20
memory: tegra: Add gr2d and gr3d to DRM IOMMU group
memory: tegra: Set DMA mask based on supported address bits
soc: at91: Add Atmel SFR SN (Serial Number) support
memory: atmel-ebi: switch to SPDX license identifiers
memory: atmel-ebi: move NUM_CS definition inside EBI driver
soc: mediatek: Refactor bus protection control
soc: mediatek: Refactor sram control
...
|
|
Pull ARM SoC platform updates from Olof Johansson:
"Most of these are for MMP (seeing a bunch of cleanups and refactorings
for the first time in a while), and for OMAP (a bunch of cleanups and
added support for voltage controller on OMAP4430)"
* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (51 commits)
ARM: OMAP2+: Add missing put_device() call in omapdss_init_of()
OMAP2: fixup doc comments in omap_device
ARM: OMAP1: drop duplicated dependency on ARCH_OMAP1
ARM: ASPEED: update default ARCH_NR_GPIO for ARCH_ASPEED
ARM: imx: use generic function to exit coherency
ARM: tegra: Use WFE for power-gating on Tegra30
ARM: tegra: Fix FLOW_CTLR_HALT register clobbering by tegra_resume()
ARM: exynos: Enable exynos-asv driver for ARCH_EXYNOS
ARM: s3c: Rename s5p_usb_phy functions
ARM: s3c: Rename s3c64xx_spi_setname() function
ARM: imx: Add serial number support for i.MX6/7 SoCs
ARM: imx: Drop imx_anatop_usb_chrg_detect_disable()
arm64: Introduce config for S32
ARM: hisi: drop useless depend on ARCH_MULTI_V7
arm64: realtek: Select reset controller
ARM: shmobile: rcar-gen2: Drop legacy DT clock support
ARM: OMAP2+: Remove duplicated include from pmic-cpcap.c
ARM: OMAP1: ams-delta FIQ: Fix a typo ("Initiaize")
MAINTAINERS: Add logicpd-som-lv and logicpd-torpedo to OMAP TREE
ARM: OMAP2+: pdata-quirks: drop TI_ST/KIM support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"Various changes and minor fixes across a couple of drivers"
* tag 'pwm/for-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: stm32: Pass breakinput instead of its values
pwm: stm32: Remove clutter from ternary operator
pwm: stm32: Validate breakinput data from DT
pwm: Update comment on struct pwm_ops::apply
pwm: sun4i: Fix incorrect calculation of duty_cycle/period
pwm: stm32: Add power management support
pwm: stm32: Split breakinput apply routine to ease PM support
dt-bindings: pwm-stm32: Document pinctrl sleep state
pwm: sun4i: Drop redundant assignment to variable pval
dt-bindings: pwm: mediatek: Remove gratuitous compatible string for MT7629
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux
Pull thermal management updates from Zhang Rui:
- Fix a deadlock regression in thermal core framework, which was
introduced in 5.3 (Wei Wang)
- Initialize thermal control framework earlier to enable thermal
mitigation during boot (Amit Kucheria)
- Convert the Intelligent Power Allocator (IPA) thermal governor to
follow the generic PM_EM instead of its own Energy Model (Quentin
Perret)
- Introduce a new Amlogic soc thermal driver (Guillaume La Roque)
- Add interrupt support for tsens thermal driver (Amit Kucheria)
- Add support for MSM8956/8976 in tsens thermal driver
(AngeloGioacchino Del Regno)
- Add support for r8a774b1 in rcar thermal driver (Biju Das)
- Add support for Thermal Monitor Unit v2 in qoriq thermal driver
(Yuantian Tang)
- Some other fixes/cleanups on thermal core framework and soc thermal
drivers (Colin Ian King, Daniel Lezcano, Hsin-Yi Wang, Tian Tao)
* 'thermal/next' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (32 commits)
thermal: Fix deadlock in thermal thermal_zone_device_check
thermal: cpu_cooling: Migrate to using the EM framework
thermal: cpu_cooling: Make the power-related code depend on IPA
PM / EM: Declare EM data types unconditionally
arm64: defconfig: Enable CONFIG_ENERGY_MODEL
drivers: thermal: tsens: fix potential integer overflow on multiply
thermal: cpu_cooling: Reorder the header file
thermal: cpu_cooling: Remove pointless dependency on CONFIG_OF
thermal: no need to set .owner when using module_platform_driver
thermal: qcom: tsens-v1: Fix kfree of a non-pointer value
cpufreq: qcom-hw: Move driver initialization earlier
clk: qcom: Initialize clock drivers earlier
cpufreq: Initialize cpufreq-dt driver earlier
cpufreq: Initialize the governors in core_initcall
thermal: Initialize thermal subsystem earlier
thermal: Remove netlink support
dt: thermal: tsens: Document compatible for MSM8976/56
thermal: qcom: tsens-v1: Add support for MSM8956 and MSM8976
MAINTAINERS: add entry for Amlogic Thermal driver
thermal: amlogic: Add thermal driver to support G12 SoCs
...
|
|
It seems that on certain MST hubs, namely the CableMatters USB-C 2x DP
hub, using the DP_PAYLOAD_ALLOCATE_SET and DP_PAYLOAD_TABLE_UPDATE_STATUS
register ranges to clear any pre-existing payload allocations on the hub isn't
always enough to reset things if the source device has been reset unexpectedly.
Or at least, that's the current running theory. The precise behavior appears to
be that when the source device gets reset unexpectedly, the hub begins reporting
an available_pbn value of 0 for all of its ports. This is a bit inconsistent
with the our theory, since this seems to happen even if previously set PBN
allocations should have resulted in a non-zero available_pbn value. So, it's
possible that something else may be going on here.
Strangely though, sending a CLEAR_PAYLOAD_ID_TABLE broadcast request when
initializing the MST topology seems to bring things into working order and make
available_pbn work again. Since this is a pretty safe solution, let's go ahead
and implement it.
Changes since v1:
* Change indenting on drm_dp_send_clear_payload_id_table() prototype
* Remove some braces in drm_dp_send_clear_payload_id_table()
* Reorganize some variable declarations in drm_dp_send_clear_payload_id_table()
* Don't forget to handle DP_CLEAR_PAYLOAD_ID_TABLE in
drm_dp_sideband_parse_reply()
* Move drm_dp_send_clear_payload_id_table() call into
drm_dp_mst_link_probe_work(), since we can't send sideband messages
while under lock in drm_dp_mst_topology_mgr_set_mst()
* Change commit message
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190829000944.20722-1-lyude@redhat.com
|
|
Merge more updates from Andrew Morton:
"Most of the rest of MM and various other things. Some Kconfig rework
still awaits merges of dependent trees from linux-next.
Subsystems affected by this patch series: mm/hotfixes, mm/memcg,
mm/vmstat, mm/thp, procfs, sysctl, misc, notifiers, core-kernel,
bitops, lib, checkpatch, epoll, binfmt, init, rapidio, uaccess, kcov,
ubsan, ipc, bitmap, mm/pagemap"
* akpm: (86 commits)
mm: remove __ARCH_HAS_4LEVEL_HACK and include/asm-generic/4level-fixup.h
um: add support for folded p4d page tables
um: remove unused pxx_offset_proc() and addr_pte() functions
sparc32: use pgtable-nopud instead of 4level-fixup
parisc/hugetlb: use pgtable-nopXd instead of 4level-fixup
parisc: use pgtable-nopXd instead of 4level-fixup
nds32: use pgtable-nopmd instead of 4level-fixup
microblaze: use pgtable-nopmd instead of 4level-fixup
m68k: mm: use pgtable-nopXd instead of 4level-fixup
m68k: nommu: use pgtable-nopud instead of 4level-fixup
c6x: use pgtable-nopud instead of 4level-fixup
arm: nommu: use pgtable-nopud instead of 4level-fixup
alpha: use pgtable-nopud instead of 4level-fixup
gpio: pca953x: tighten up indentation
gpio: pca953x: convert to use bitmap API
gpio: pca953x: use input from regs structure in pca953x_irq_pending()
gpio: pca953x: remove redundant variable and check in IRQ handler
lib/bitmap: introduce bitmap_replace() helper
lib/test_bitmap: fix comment about this file
lib/test_bitmap: move exp1 and exp2 upper for others to use
...
|
|
Now that we no longer modify the fbops, or hold non-const pointers to
it, we can make it const. After this, we can start making the fbops
const all over the place.
Cc: linux-fbdev@vger.kernel.org
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/700c6b52c39c6e7babaa921f583eac354714d9fc.1575390740.git.jani.nikula@intel.com
|
|
Declarations of drm_legacy_pci_{init,exit}() are being moved to
drm_legacy.h. CONFIG_DRM_LEGACY protects the implementation.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191203100406.9674-3-tzimmermann@suse.de
|
|
Non-PCI systems should not build PCI helpers. Set up source code, header
file and Makefile accordingly.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191203100406.9674-2-tzimmermann@suse.de
|
|
There are no architectures that use include/asm-generic/4level-fixup.h
therefore it can be removed along with __ARCH_HAS_4LEVEL_HACK define.
Link: http://lkml.kernel.org/r/1572938135-31886-14-git-send-email-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Anatoly Pugachev <matorola@gmail.com>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Peter Rosin <peda@axentia.se>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rolf Eike Beer <eike-kernel@sf-tec.de>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Sam Creasey <sammy@sammy.net>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
In some drivers we want to have a single operation over bitmap which is
an equivalent to:
*dst = (*old & ~(*mask)) | (*new & *mask)
Introduce bitmap_replace() helper for this.
Link: http://lkml.kernel.org/r/20191022172922.61232-8-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: William Breathitt Gray <vilhelm.gray@gmail.com>
Cc: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Userspace cannot compile <asm/sembuf.h> due to some missing type
definitions. For example, building it for x86 fails as follows:
CC usr/include/asm/sembuf.h.s
In file included from <command-line>:32:0:
usr/include/asm/sembuf.h:17:20: error: field `sem_perm' has incomplete type
struct ipc64_perm sem_perm; /* permissions .. see ipc.h */
^~~~~~~~
usr/include/asm/sembuf.h:24:2: error: unknown type name `__kernel_time_t'
__kernel_time_t sem_otime; /* last semop time */
^~~~~~~~~~~~~~~
usr/include/asm/sembuf.h:25:2: error: unknown type name `__kernel_ulong_t'
__kernel_ulong_t __unused1;
^~~~~~~~~~~~~~~~
usr/include/asm/sembuf.h:26:2: error: unknown type name `__kernel_time_t'
__kernel_time_t sem_ctime; /* last change time */
^~~~~~~~~~~~~~~
usr/include/asm/sembuf.h:27:2: error: unknown type name `__kernel_ulong_t'
__kernel_ulong_t __unused2;
^~~~~~~~~~~~~~~~
usr/include/asm/sembuf.h:29:2: error: unknown type name `__kernel_ulong_t'
__kernel_ulong_t sem_nsems; /* no. of semaphores in array */
^~~~~~~~~~~~~~~~
usr/include/asm/sembuf.h:30:2: error: unknown type name `__kernel_ulong_t'
__kernel_ulong_t __unused3;
^~~~~~~~~~~~~~~~
usr/include/asm/sembuf.h:31:2: error: unknown type name `__kernel_ulong_t'
__kernel_ulong_t __unused4;
^~~~~~~~~~~~~~~~
It is just a matter of missing include directive.
Include <asm/ipcbuf.h> to make it self-contained, and add it to
the compile-test coverage.
Link: http://lkml.kernel.org/r/20191030063855.9989-3-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Userspace cannot compile <asm/msgbuf.h> due to some missing type
definitions. For example, building it for x86 fails as follows:
CC usr/include/asm/msgbuf.h.s
In file included from usr/include/asm/msgbuf.h:6:0,
from <command-line>:32:
usr/include/asm-generic/msgbuf.h:25:20: error: field `msg_perm' has incomplete type
struct ipc64_perm msg_perm;
^~~~~~~~
usr/include/asm-generic/msgbuf.h:27:2: error: unknown type name `__kernel_time_t'
__kernel_time_t msg_stime; /* last msgsnd time */
^~~~~~~~~~~~~~~
usr/include/asm-generic/msgbuf.h:28:2: error: unknown type name `__kernel_time_t'
__kernel_time_t msg_rtime; /* last msgrcv time */
^~~~~~~~~~~~~~~
usr/include/asm-generic/msgbuf.h:29:2: error: unknown type name `__kernel_time_t'
__kernel_time_t msg_ctime; /* last change time */
^~~~~~~~~~~~~~~
usr/include/asm-generic/msgbuf.h:41:2: error: unknown type name `__kernel_pid_t'
__kernel_pid_t msg_lspid; /* pid of last msgsnd */
^~~~~~~~~~~~~~
usr/include/asm-generic/msgbuf.h:42:2: error: unknown type name `__kernel_pid_t'
__kernel_pid_t msg_lrpid; /* last receive pid */
^~~~~~~~~~~~~~
It is just a matter of missing include directive.
Include <asm/ipcbuf.h> to make it self-contained, and add it to
the compile-test coverage.
Link: http://lkml.kernel.org/r/20191030063855.9989-2-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Userspace cannot compile <asm/ipcbuf.h> due to some missing type
definitions. For example, building it for x86 fails as follows:
CC usr/include/asm/ipcbuf.h.s
In file included from usr/include/asm/ipcbuf.h:1:0,
from <command-line>:32:
usr/include/asm-generic/ipcbuf.h:21:2: error: unknown type name `__kernel_key_t'
__kernel_key_t key;
^~~~~~~~~~~~~~
usr/include/asm-generic/ipcbuf.h:22:2: error: unknown type name `__kernel_uid32_t'
__kernel_uid32_t uid;
^~~~~~~~~~~~~~~~
usr/include/asm-generic/ipcbuf.h:23:2: error: unknown type name `__kernel_gid32_t'
__kernel_gid32_t gid;
^~~~~~~~~~~~~~~~
usr/include/asm-generic/ipcbuf.h:24:2: error: unknown type name `__kernel_uid32_t'
__kernel_uid32_t cuid;
^~~~~~~~~~~~~~~~
usr/include/asm-generic/ipcbuf.h:25:2: error: unknown type name `__kernel_gid32_t'
__kernel_gid32_t cgid;
^~~~~~~~~~~~~~~~
usr/include/asm-generic/ipcbuf.h:26:2: error: unknown type name `__kernel_mode_t'
__kernel_mode_t mode;
^~~~~~~~~~~~~~~
usr/include/asm-generic/ipcbuf.h:28:35: error: `__kernel_mode_t' undeclared here (not in a function)
unsigned char __pad1[4 - sizeof(__kernel_mode_t)];
^~~~~~~~~~~~~~~
usr/include/asm-generic/ipcbuf.h:31:2: error: unknown type name `__kernel_ulong_t'
__kernel_ulong_t __unused1;
^~~~~~~~~~~~~~~~
usr/include/asm-generic/ipcbuf.h:32:2: error: unknown type name `__kernel_ulong_t'
__kernel_ulong_t __unused2;
^~~~~~~~~~~~~~~~
It is just a matter of missing include directive.
Include <linux/posix_types.h> to make it self-contained, and add it to
the compile-test coverage.
Link: http://lkml.kernel.org/r/20191030063855.9989-1-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Patch series " kcov: collect coverage from usb and vhost", v3.
This patchset extends kcov to allow collecting coverage from backgound
kernel threads. This extension requires custom annotations for each of
the places where coverage collection is desired. This patchset
implements this for hub events in the USB subsystem and for vhost
workers. See the first patch description for details about the kcov
extension. The other two patches apply this kcov extension to USB and
vhost.
Examples of other subsystems that might potentially benefit from this
when custom annotations are added (the list is based on
process_one_work() callers for bugs recently reported by syzbot):
1. fs: writeback wb_workfn() worker,
2. net: addrconf_dad_work()/addrconf_verify_work() workers,
3. net: neigh_periodic_work() worker,
4. net/p9: p9_write_work()/p9_read_work() workers,
5. block: blk_mq_run_work_fn() worker.
These patches have been used to enable coverage-guided USB fuzzing with
syzkaller for the last few years, see the details here:
https://github.com/google/syzkaller/blob/master/docs/linux/external_fuzzing_usb.md
This patchset has been pushed to the public Linux kernel Gerrit
instance:
https://linux-review.googlesource.com/c/linux/kernel/git/torvalds/linux/+/1524
This patch (of 3):
Add background thread coverage collection ability to kcov.
With KCOV_ENABLE coverage is collected only for syscalls that are issued
from the current process. With KCOV_REMOTE_ENABLE it's possible to
collect coverage for arbitrary parts of the kernel code, provided that
those parts are annotated with kcov_remote_start()/kcov_remote_stop().
This allows to collect coverage from two types of kernel background
threads: the global ones, that are spawned during kernel boot in a
limited number of instances (e.g. one USB hub_event() worker thread is
spawned per USB HCD); and the local ones, that are spawned when a user
interacts with some kernel interface (e.g. vhost workers).
To enable collecting coverage from a global background thread, a unique
global handle must be assigned and passed to the corresponding
kcov_remote_start() call. Then a userspace process can pass a list of
such handles to the KCOV_REMOTE_ENABLE ioctl in the handles array field
of the kcov_remote_arg struct. This will attach the used kcov device to
the code sections, that are referenced by those handles.
Since there might be many local background threads spawned from
different userspace processes, we can't use a single global handle per
annotation. Instead, the userspace process passes a non-zero handle
through the common_handle field of the kcov_remote_arg struct. This
common handle gets saved to the kcov_handle field in the current
task_struct and needs to be passed to the newly spawned threads via
custom annotations. Those threads should in turn be annotated with
kcov_remote_start()/kcov_remote_stop().
Internally kcov stores handles as u64 integers. The top byte of a
handle is used to denote the id of a subsystem that this handle belongs
to, and the lower 4 bytes are used to denote the id of a thread instance
within that subsystem. A reserved value 0 is used as a subsystem id for
common handles as they don't belong to a particular subsystem. The
bytes 4-7 are currently reserved and must be zero. In the future the
number of bytes used for the subsystem or handle ids might be increased.
When a particular userspace process collects coverage by via a common
handle, kcov will collect coverage for each code section that is
annotated to use the common handle obtained as kcov_handle from the
current task_struct. However non common handles allow to collect
coverage selectively from different subsystems.
Link: http://lkml.kernel.org/r/e90e315426a384207edbec1d6aa89e43008e4caf.1572366574.git.andreyknvl@google.com
Signed-off-by: Andrey Konovalov <andreyknvl@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: David Windsor <dwindsor@gmail.com>
Cc: Elena Reshetova <elena.reshetova@intel.com>
Cc: Anders Roxell <anders.roxell@linaro.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Marco Elver <elver@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
As we've done with VFS, string operations, etc, reject usercopy sizes
larger than INT_MAX, which would be nice to have for catching bugs
related to size calculation overflows[1].
This adds 10 bytes to x86_64 defconfig text and 1980 bytes to the data
section:
text data bss dec hex filename
19691167 5134320 1646664 26472151 193eed7 vmlinux.before
19691177 5136300 1646664 26474141 193f69d vmlinux.after
[1] https://marc.info/?l=linux-s390&m=156631939010493&w=2
Link: http://lkml.kernel.org/r/201908251612.F9902D7A@keescook
Signed-off-by: Kees Cook <keescook@chromium.org>
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Follow the kernel conventions, rename addr_in_gen_pool to
gen_pool_has_addr.
[sjhuang@iluvatar.ai: fix Documentation/ too]
Link: http://lkml.kernel.org/r/20181229015914.5573-1-sjhuang@iluvatar.ai
Link: http://lkml.kernel.org/r/20181228083950.20398-1-sjhuang@iluvatar.ai
Signed-off-by: Huang Shijie <sjhuang@iluvatar.ai>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
After move parent assignment out, we can check the color directly.
Link: http://lkml.kernel.org/r/20191028021442.5450-2-richardw.yang@linux.intel.com
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Michel Lespinasse <walken@google.com>
Reviewed-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Both in Case 2 and 3, we exchange n and s. This mean no matter whether
child2 is NULL or not, successor's parent should be assigned to node's.
This patch takes this step out to make it explicit and reduce the
ambiguity.
Besides, this step reduces some symbol size like rb_erase().
KERN_CONFIG upstream patched
OPT_FOR_PERF 877 870
OPT_FOR_SIZE 635 621
Link: http://lkml.kernel.org/r/20191028021442.5450-1-richardw.yang@linux.intel.com
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Michel Lespinasse <walken@google.com>
Reviewed-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Pach series "Introduce the for_each_set_clump8 macro", v18.
While adding GPIO get_multiple/set_multiple callback support for various
drivers, I noticed a pattern of looping manifesting that would be useful
standardized as a macro.
This patchset introduces the for_each_set_clump8 macro and utilizes it
in several GPIO drivers. The for_each_set_clump macro8 facilitates a
for-loop syntax that iterates over a memory region entire groups of set
bits at a time.
For example, suppose you would like to iterate over a 32-bit integer 8
bits at a time, skipping over 8-bit groups with no set bit, where
XXXXXXXX represents the current 8-bit group:
Example: 10111110 00000000 11111111 00110011
First loop: 10111110 00000000 11111111 XXXXXXXX
Second loop: 10111110 00000000 XXXXXXXX 00110011
Third loop: XXXXXXXX 00000000 11111111 00110011
Each iteration of the loop returns the next 8-bit group that has at
least one set bit.
The for_each_set_clump8 macro has four parameters:
* start: set to the bit offset of the current clump
* clump: set to the current clump value
* bits: bitmap to search within
* size: bitmap size in number of bits
In this version of the patchset, the for_each_set_clump macro has been
reimplemented and simplified based on the suggestions provided by Rasmus
Villemoes and Andy Shevchenko in the version 4 submission.
In particular, the function of the for_each_set_clump macro has been
restricted to handle only 8-bit clumps; the drivers that use the
for_each_set_clump macro only handle 8-bit ports so a generic
for_each_set_clump implementation is not necessary. Thus, a solution
for large clumps (i.e. those larger than the width of a bitmap word)
can be postponed until a driver appears that actually requires such a
generic for_each_set_clump implementation.
For what it's worth, a semi-generic for_each_set_clump (i.e. for clumps
smaller than the width of a bitmap word) can be implemented by simply
replacing the hardcoded '8' and '0xFF' instances with respective
variables. I have not yet had a need for such an implementation, and
since it falls short of a true generic for_each_set_clump function, I
have decided to forgo such an implementation for now.
In addition, the bitmap_get_value8 and bitmap_set_value8 functions are
introduced to get and set 8-bit values respectively. Their use is based
on the behavior suggested in the patchset version 4 review.
This patch (of 14):
This macro iterates for each 8-bit group of bits (clump) with set bits,
within a bitmap memory region. For each iteration, "start" is set to
the bit offset of the found clump, while the respective clump value is
stored to the location pointed by "clump". Additionally, the
bitmap_get_value8 and bitmap_set_value8 functions are introduced to
respectively get and set an 8-bit value in a bitmap memory region.
[gustavo@embeddedor.com: fix potential sign-extension overflow]
Link: http://lkml.kernel.org/r/20191015184657.GA26541@embeddedor
[akpm@linux-foundation.org: s/ULL/UL/, per Joe]
[vilhelm.gray@gmail.com: add for_each_set_clump8 documentation]
Link: http://lkml.kernel.org/r/20191016161825.301082-1-vilhelm.gray@gmail.com
Link: http://lkml.kernel.org/r/893c3b4f03266c9496137cc98ac2b1bd27f92c73.1570641097.git.vilhelm.gray@gmail.com
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Suggested-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Suggested-by: Lukas Wunner <lukas@wunner.de>
Tested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Phil Reid <preid@electromag.com.au>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Mathias Duckeck <m.duckeck@kunbus.de>
Cc: Morten Hein Tiljeset <morten.tiljeset@prevas.dk>
Cc: Sean Nyekjaer <sean.nyekjaer@prevas.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
blocking_notifier_chain_cond_register() does not consider system_booting
state, which is the only difference between this function and
blocking_notifier_cain_register(). This can be a bug and is a piece of
duplicate code.
Delete blocking_notifier_chain_cond_register()
Link: http://lkml.kernel.org/r/1568861888-34045-4-git-send-email-nixiaoming@huawei.com
Signed-off-by: Xiaoming Ni <nixiaoming@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Anna Schumaker <anna.schumaker@netapp.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: J. Bruce Fields <bfields@fieldses.org>
Cc: Jeff Layton <jlayton@kernel.org>
Cc: Nadia Derbey <Nadia.Derbey@bull.net>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Sam Protsenko <semen.protsenko@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Trond Myklebust <trond.myklebust@hammerspace.com>
Cc: Vasily Averin <vvs@virtuozzo.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
There were discussions in the past about use cases for
simple_strto<foo>() functions and, in some rare cases, they have a
benefit over kstrto<foo>() ones.
Update a comment to reduce confusion about special use cases.
Link: http://lkml.kernel.org/r/20190801192904.41087-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Suggested-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Mans Rullgard <mans@mansr.com>
Cc: Petr Mladek <pmladek@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Userspace cannot compile <linux/scc.h>
CC usr/include/linux/scc.h.s
In file included from <command-line>:32:0:
usr/include/linux/scc.h:20:20: error: `SIOCDEVPRIVATE' undeclared here (not in a function)
SIOCSCCRESERVED = SIOCDEVPRIVATE,
^~~~~~~~~~~~~~
Include <linux/sockios.h> to make it self-contained, and add it to the
compile-test coverage.
Link: http://lkml.kernel.org/r/20191108055809.26969-1-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Having BUILD_BUG_ON_ZERO produce a value of type size_t leads to awkward
casts in cases where the result needs to be signed, or of smaller type
than size_t. To avoid this, cast the value to int instead and rely on
implicit type conversions when a larger or unsigned type is needed.
Link: http://lkml.kernel.org/r/20190811184938.1796-3-rikard.falkeborn@gmail.com
Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com>
Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Joe Perches <joe@perches.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Fix coding style of "struct ctl_table" and "struct ctl_table_header" to
have inline braces.
Besides the wide use of this proposed cose style, this change helps to
find at a glance the struct definition when navigating the code.
Link: http://lkml.kernel.org/r/20190903154906.188651-1-balsini@android.com
Signed-off-by: Alessio Balsini <balsini@android.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
state_size and ops are in the wrong position.
Link: http://lkml.kernel.org/r/20190910021747.11216-1-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Aleksa Sarai <cyphar@cyphar.com>
Reviewed-by: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Use common names from vmstat array when possible. This gives not much
difference in code size for now, but should help in keeping interfaces
consistent.
add/remove: 0/2 grow/shrink: 2/0 up/down: 70/-72 (-2)
Function old new delta
memory_stat_format 984 1050 +66
memcg_stat_show 957 961 +4
memcg1_event_names 32 - -32
mem_cgroup_lru_names 40 - -40
Total: Before=14485337, After=14485335, chg -0.00%
Link: http://lkml.kernel.org/r/157113012508.453.80391533767219371.stgit@buzz
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Statistics in vmstat is combined from counters with different structure,
but names for them are merged into one array.
This patch adds trivial helpers to get name for each item:
const char *zone_stat_name(enum zone_stat_item item);
const char *numa_stat_name(enum numa_stat_item item);
const char *node_stat_name(enum node_stat_item item);
const char *writeback_stat_name(enum writeback_stat_item item);
const char *vm_event_name(enum vm_event_item item);
Names for enum writeback_stat_item are folded in the middle of
vmstat_text so this patch moves declaration into header to calculate
offset of following items.
Also this patch reuses piece of node stat names for lru list names:
const char *lru_list_name(enum lru_list lru);
This returns common lru list names: "inactive_anon", "active_anon",
"inactive_file", "active_file", "unevictable".
[khlebnikov@yandex-team.ru: do not use size of vmstat_text as count of /proc/vmstat items]
Link: http://lkml.kernel.org/r/157152151769.4139.15423465513138349343.stgit@buzz
Link: https://lore.kernel.org/linux-mm/cd1c42ae-281f-c8a8-70ac-1d01d417b2e1@infradead.org/T/#u
Link: http://lkml.kernel.org/r/157113012325.453.562783073839432766.stgit@buzz
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: YueHaibing <yuehaibing@huawei.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull more tracing updates from Steven Rostedt:
"Two fixes and one patch that was missed:
Fixes:
- Missing __print_hex_dump undef for processing new function in trace
events
- Stop WARN_ON messages when lockdown disables tracing on boot up
Enhancement:
- Debug option to inject trace events from userspace (for rasdaemon)"
The enhancement has its own config option and is non invasive. It's been
discussed for sever months and should have been added to my original
push, but I never pulled it into my queue.
* tag 'trace-v5.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Do not create directories if lockdown is in affect
tracing: Introduce trace event injection
tracing: Fix __print_hex_dump scope
|
|
Add keycode for toggling electronic privacy screen to the keycodes
definition. Some new laptops have a privacy screen which can be toggled
with a key on the keyboard.
Signed-off-by: Mathew King <mathewk@chromium.org>
Link: https://lore.kernel.org/r/20191017163208.235518-1-mathewk@chromium.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
The skb_mpls_push was not updating ethertype of an ethernet packet if
the packet was originally received from a non ARPHRD_ETHER device.
In the below OVS data path flow, since the device corresponding to
port 7 is an l3 device (ARPHRD_NONE) the skb_mpls_push function does
not update the ethertype of the packet even though the previous
push_eth action had added an ethernet header to the packet.
recirc_id(0),in_port(7),eth_type(0x0800),ipv4(tos=0/0xfc,ttl=64,frag=no),
actions:push_eth(src=00:00:00:00:00:00,dst=00:00:00:00:00:00),
push_mpls(label=13,tc=0,ttl=64,bos=1,eth_type=0x8847),4
Fixes: 8822e270d697 ("net: core: move push MPLS functionality from OvS to core helper")
Signed-off-by: Martin Varghese <martin.varghese@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
