| Age | Commit message (Collapse) | Author |
|---|
|
blk_crypto_get_keyslot, blk_crypto_put_keyslot, __blk_crypto_evict_key
and __blk_crypto_cfg_supported are only used internally by the
blk-crypto code, so move the out of blk-crypto-profile.h, which is
included by drivers that supply blk-crypto functionality.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20221114042944.1009870-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add a blk_crypto_config_supported_natively helper that wraps
__blk_crypto_cfg_supported to retrieve the crypto_profile from the
request queue. With this fscrypt can stop including
blk-crypto-profile.h and rely on the public consumer interface in
blk-crypto.h.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20221114042944.1009870-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Switch all public blk-crypto interfaces to use struct block_device
arguments to specify the device they operate on instead of th
request_queue, which is a block layer implementation detail.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20221114042944.1009870-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add support for Amlogic Meson G12 Series SOC - DDR bandwidth PMU driver
framework and interfaces. The PMU can not only monitor the total DDR
bandwidth, but also individual IP module bandwidth.
Signed-off-by: Jiucheng Xu <jiucheng.xu@amlogic.com>
Tested-by: Chris Healy <healych@amazon.com>
Link: https://lore.kernel.org/r/20221121021602.3306998-1-jiucheng.xu@amlogic.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
usb suspend clock has a gate shared with usb_root_clk.
Fixes: 9c140d9926761 ("clk: imx: Add support for i.MX8MP clock driver")
Cc: stable@vger.kernel.org # v5.19+
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/1664549663-20364-1-git-send-email-jun.li@nxp.com
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into soc/drivers
Memory controller drivers for v6.2, part two
1. ARM PL353: document PL354 in bindings.
2. TI/OMAP GPMC: allow setting wait-pin polarity.
* tag 'memory-controller-drv-6.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: omap-gpmc: fix coverity issue "Control flow issues"
dt-bindings: memory-controllers: ti,gpmc: add wait-pin polarity
memory: omap-gpmc: wait pin additions
MAINTAINERS: arm,pl353-smc: correct dt-binding path
dt-bindings: memory-controllers: arm,pl353-smc: Extend to support 'arm,pl354' SMC
Link: https://lore.kernel.org/r/20221116093509.19657-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
In DLM when we send a dlm message it is easy to add the lock resource
name, but additional lookup is required when to trace the receive
message side. The idea here is to move the lookup work to the user by
using a lookup to find the right send message with recv message. As note
DLM can't drop any message which is guaranteed by a special session
layer.
For doing the lookup a 3 tupel is required as an unique identification
which is dst nodeid, src nodeid and sequence number. This patch adds the
destination nodeid to the dlm message trace points. The source nodeid is
given by the h_nodeid field inside the header.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
This patch renames seq to h_seq as it is named in the dlm header
structure.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
|
|
We can have dependencies between epoll and io_uring. Consider an epoll
context, identified by the epfd file descriptor, and an io_uring file
descriptor identified by iofd. If we add iofd to the epfd context, and
arm a multishot poll request for epfd with iofd, then the multishot
poll request will repeatedly trigger and generate events until terminated
by CQ ring overflow. This isn't a desired behavior.
Add EPOLL_URING so that io_uring can pass it in as part of the poll wakeup
key, and io_uring can check for that to detect a potential recursive
invocation.
Cc: stable@vger.kernel.org # 6.0
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It might be useful for applications to detect if a zero copy transfer with
SEND[MSG]_ZC was actually possible or not. The application can fallback to
plain SEND[MSG] in order to avoid the overhead of two cqes per request. Or
it can generate a log message that could indicate to an administrator that
no zero copy was possible and could explain degraded performance.
Cc: stable@vger.kernel.org # 6.1
Link: https://lore.kernel.org/io-uring/fb6a7599-8a9b-15e5-9b64-6cd9d01c6ff4@gmail.com/T/#m2b0d9df94ce43b0e69e6c089bdff0ce6babbdfaa
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/8945b01756d902f5d5b0667f20b957ad3f742e5e.1666895626.git.metze@samba.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX dt-bindings update for 6.2:
- New vendor prefix for Cloos and InnoComm.
- New compatible for Cloos PHG board, InnoComm WB15 EVK and Kobo Aura 2.
- Improve snvs-lpgpr bindings schema regarding i.MX8M SNVS LPGRP
compatible strings.
- Improve fsl-imx-cspi bindings schema for i.MX8MP ECSPI.
- Add bindings schema for i.MX8M ANATOP device.
- Update SCU firmware resource ID header by syncing with the latest
available SCFW kit version 1.13.0.
* tag 'imx-bindings-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: arm: fsl: Add an entry for Cloos PHG board
dt-bindings: vendor-prefixes: Add an entry for Cloos
dt-bindings: nvmem: snvs-lpgpr: Fix i.MX8M compatible strings
dt-bindings: spi: fsl-imx-cspi: update i.MX8MP binding
dt-bindings: arm: fsl: add compatible string for Kobo Aura 2
dt-bindings: clock: add i.MX8M Anatop
dt-bindings: arm: fsl: Add InnoComm WB15 EVK
dt-bindings: vendor-prefixes: Add prefix for InnoComm
dt-bindings: firmware: imx: sync with SCFW kit v1.13.0
Link: https://lore.kernel.org/r/20221119125733.32719-3-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Fixes following issues introduced in a previous commit
to clarify values for pin config pull up and down types.
- replace spaces with tabs to be consistent with rest of the doc
- use capitalization for unit (ohms -> Ohms)
Signed-off-by: Niyas Sait <niyas.sait@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221117123542.1154252-1-niyas.sait@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
At the moment, we print the JEDEC ID that is stored in our database. The
generic flash support won't have such an entry in our database. To find
out the JEDEC ID later we will have to cache it. There is also another
advantage: If the flash is found in the database, the ID could be
truncated because the ID of the entry is used which can be shorter. Some
flashes still holds valuable information in the bytes after the JEDEC ID
and come in handy during debugging of when coping with INFO6() entries.
These are not accessible for now.
Save a copy of the ID bytes after reading and display it via debugfs.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com>
Link: https://lore.kernel.org/r/20220810220654.1297699-4-michael@walle.cc
|
|
Endpoint creation can fail for a number of reasons; in case of failure
append the error number to the extended ack message, using a newly
introduced generic helper.
Additionally let mptcp_pm_nl_append_new_local_addr() report different
error reasons.
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Update the device-tree clock, memory, power and reset headers for
Tegra234 by adding the definitions for all the various devices.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Two patches from Kees Cook [1]:
These patches work around a deficiency in GCC (>=11) and Clang (<16)
where the __alloc_size attribute does not apply to inlines.
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=96503
This manifests as reduced overflow detection coverage for many allocation
sites under CONFIG_FORTIFY_SOURCE=y, where the allocation size was not
actually being propagated to __builtin_dynamic_object_size().
[1] https://lore.kernel.org/all/20221118034713.gonna.754-kees@kernel.org/
|
|
We need the USB fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
kmalloc() redzone improvements by Feng Tang
From cover letter [1]:
kmalloc's API family is critical for mm, and one of its nature is that
it will round up the request size to a fixed one (mostly power of 2).
When user requests memory for '2^n + 1' bytes, actually 2^(n+1) bytes
could be allocated, so there is an extra space than what is originally
requested.
This patchset tries to extend the redzone sanity check to the extra
kmalloced buffer than requested, to better detect un-legitimate access
to it. (depends on SLAB_STORE_USER & SLAB_RED_ZONE)
[1] https://lore.kernel.org/all/20221021032405.1825078-1-feng.tang@intel.com/
|
|
- Removal of dead code from deactivate_slab() by Hyeonggon Yoo.
- Fix of BUILD_BUG_ON() for sufficient early percpu size by Baoquan He.
- Make kmem_cache_alloc() kernel-doc less misleading, by myself.
|
|
Passing a constant-0 size allocation into kmalloc() or kmalloc_node()
does not need to be a fast-path operation, so the static return value
can be removed entirely. This makes sure that all paths through the
inlines result in a full extern function call, where __alloc_size()
hints will actually be seen[1] by GCC. (A constant return value of 0
means the "0" allocation size won't be propagated by the inline.)
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=96503
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: linux-mm@kvack.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
As already done for kmalloc_node(), clean up the #ifdef usage in the
definition of kmalloc() so that the SLOB-only version is an entirely
separate and much more readable function.
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: linux-mm@kvack.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
We need the kernfs changes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Alexander reports an issue with the kmem_cache_alloc() comment in
mm/slab.c:
> The current comment mentioned that the flags only matters if the
> cache has no available objects. It's different for the __GFP_ZERO
> flag which will ensure that the returned object is always zeroed
> in any case.
> I have the feeling I run into this question already two times if
> the user need to zero the object or not, but the user does not need
> to zero the object afterwards. However another use of __GFP_ZERO
> and only zero the object if the cache has no available objects would
> also make no sense.
and suggests thus mentioning __GFP_ZERO as the exception. But on closer
inspection, the part about flags being only relevant if cache has no
available objects is misleading. The slab user has no reliable way to
determine if there are available objects, and e.g. the might_sleep()
debug check can be performed even if objects are available, so passing
correct flags given the allocation context always matters.
Thus remove that sentence completely, and while at it, move the comment
to from SLAB-specific mm/slab.c to the common include/linux/slab.h
The comment otherwise refers flags description for kmalloc(), so add
__GFP_ZERO comment there and remove a very misleading GFP_HIGHUSER
(not applicable to slab) description from there. Mention kzalloc() and
kmem_cache_zalloc() shortcuts.
Reported-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/all/20221011145413.8025-1-aahringo@redhat.com/
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
LKP reported a build failure as below on the following patch "mm/slub,
percpu: correct the calculation of early percpu allocation size"
~~~~~~
In file included from <command-line>:
In function 'alloc_kmem_cache_cpus',
inlined from 'kmem_cache_open' at mm/slub.c:4340:6:
>> >> include/linux/compiler_types.h:357:45: error: call to '__compiletime_assert_474' declared with attribute error:
BUILD_BUG_ON failed: PERCPU_DYNAMIC_EARLY_SIZE < NR_KMALLOC_TYPES * KMALLOC_SHIFT_HIGH * sizeof(struct kmem_cache_cpu)
357 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
~~~~~~
From the kernel config file provided by LKP, the building was made on
arm64 with below Kconfig item enabled:
CONFIG_ZONE_DMA=y
CONFIG_SLUB_CPU_PARTIAL=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_SLUB_STATS=y
CONFIG_ARM64_PAGE_SHIFT=16
CONFIG_ARM64_64K_PAGES=y
Then we will have:
NR_KMALLOC_TYPES:4
KMALLOC_SHIFT_HIGH:17
sizeof(struct kmem_cache_cpu):184
The product of them is 12512, which is bigger than PERCPU_DYNAMIC_EARLY_SIZE,
12K. Hence, the BUILD_BUG_ON in alloc_kmem_cache_cpus() is triggered.
Earlier, in commit 099a19d91ca4 ("percpu: allow limited allocation
before slab is online"), PERCPU_DYNAMIC_EARLY_SIZE was introduced and
set to 12K which is equal to the then PERPCU_DYNAMIC_RESERVE.
Later, in commit 1a4d76076cda ("percpu: implement asynchronous chunk
population"), PERPCU_DYNAMIC_RESERVE was increased by 8K, while
PERCPU_DYNAMIC_EARLY_SIZE was kept unchanged.
So, here increase PERCPU_DYNAMIC_EARLY_SIZE by 8K too to accommodate to
the slub's requirement.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Dennis Zhou <dennis@kernel.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
The sysctl_numa_balancing_promote_rate_limit and sysctl_numa_balancing
are part of sched, move them to its own file.
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
Implement bpf_cast_to_kern_ctx() kfunc which does a type cast
of a uapi ctx object to the corresponding kernel ctx. Previously
if users want to access some data available in kctx but not
in uapi ctx, bpf_probe_read_kernel() helper is needed.
The introduction of bpf_cast_to_kern_ctx() allows direct
memory access which makes code simpler and easier to understand.
Signed-off-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20221120195432.3113982-1-yhs@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix polling to block on watermark like the reads do, as user space
applications get confused when the select says read is available, and
then the read blocks
- Fix accounting of ring buffer dropped pages as it is what is used to
determine if the buffer is empty or not
- Fix memory leak in tracing_read_pipe()
- Fix struct trace_array warning about being declared in parameters
- Fix accounting of ftrace pages used in output at start up.
- Fix allocation of dyn_ftrace pages by subtracting one from order
instead of diving it by 2
- Static analyzer found a case were a pointer being used outside of a
NULL check (rb_head_page_deactivate())
- Fix possible NULL pointer dereference if kstrdup() fails in
ftrace_add_mod()
- Fix memory leak in test_gen_synth_cmd() and test_empty_synth_event()
- Fix bad pointer dereference in register_synth_event() on error path
- Remove unused __bad_type_size() method
- Fix possible NULL pointer dereference of entry in list 'tr->err_log'
- Fix NULL pointer deference race if eprobe is called before the event
setup
* tag 'trace-v6.1-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix race where eprobes can be called before the event
tracing: Fix potential null-pointer-access of entry in list 'tr->err_log'
tracing: Remove unused __bad_type_size() method
tracing: Fix wild-memory-access in register_synth_event()
tracing: Fix memory leak in test_gen_synth_cmd() and test_empty_synth_event()
ftrace: Fix null pointer dereference in ftrace_add_mod()
ring_buffer: Do not deactivate non-existant pages
ftrace: Optimize the allocation for mcount entries
ftrace: Fix the possible incorrect kernel message
tracing: Fix warning on variable 'struct trace_array'
tracing: Fix memory leak in tracing_read_pipe()
ring-buffer: Include dropped pages in counting dirty patches
tracing/ring-buffer: Have polling block on watermark
|
|
Kfuncs currently support specifying the KF_TRUSTED_ARGS flag to signal
to the verifier that it should enforce that a BPF program passes it a
"safe", trusted pointer. Currently, "safe" means that the pointer is
either PTR_TO_CTX, or is refcounted. There may be cases, however, where
the kernel passes a BPF program a safe / trusted pointer to an object
that the BPF program wishes to use as a kptr, but because the object
does not yet have a ref_obj_id from the perspective of the verifier, the
program would be unable to pass it to a KF_ACQUIRE | KF_TRUSTED_ARGS
kfunc.
The solution is to expand the set of pointers that are considered
trusted according to KF_TRUSTED_ARGS, so that programs can invoke kfuncs
with these pointers without getting rejected by the verifier.
There is already a PTR_UNTRUSTED flag that is set in some scenarios,
such as when a BPF program reads a kptr directly from a map
without performing a bpf_kptr_xchg() call. These pointers of course can
and should be rejected by the verifier. Unfortunately, however,
PTR_UNTRUSTED does not cover all the cases for safety that need to
be addressed to adequately protect kfuncs. Specifically, pointers
obtained by a BPF program "walking" a struct are _not_ considered
PTR_UNTRUSTED according to BPF. For example, say that we were to add a
kfunc called bpf_task_acquire(), with KF_ACQUIRE | KF_TRUSTED_ARGS, to
acquire a struct task_struct *. If we only used PTR_UNTRUSTED to signal
that a task was unsafe to pass to a kfunc, the verifier would mistakenly
allow the following unsafe BPF program to be loaded:
SEC("tp_btf/task_newtask")
int BPF_PROG(unsafe_acquire_task,
struct task_struct *task,
u64 clone_flags)
{
struct task_struct *acquired, *nested;
nested = task->last_wakee;
/* Would not be rejected by the verifier. */
acquired = bpf_task_acquire(nested);
if (!acquired)
return 0;
bpf_task_release(acquired);
return 0;
}
To address this, this patch defines a new type flag called PTR_TRUSTED
which tracks whether a PTR_TO_BTF_ID pointer is safe to pass to a
KF_TRUSTED_ARGS kfunc or a BPF helper function. PTR_TRUSTED pointers are
passed directly from the kernel as a tracepoint or struct_ops callback
argument. Any nested pointer that is obtained from walking a PTR_TRUSTED
pointer is no longer PTR_TRUSTED. From the example above, the struct
task_struct *task argument is PTR_TRUSTED, but the 'nested' pointer
obtained from 'task->last_wakee' is not PTR_TRUSTED.
A subsequent patch will add kfuncs for storing a task kfunc as a kptr,
and then another patch will add selftests to validate.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20221120051004.3605026-3-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
reg_type_str() in the verifier currently only allows a single register
type modifier to be present in the 'prefix' string which is eventually
stored in the env type_str_buf. This currently works fine because there
are no overlapping type modifiers, but once PTR_TRUSTED is added, that
will no longer be the case. This patch updates reg_type_str() to support
having multiple modifiers in the prefix string, and updates the size of
type_str_buf to be 128 bytes.
Signed-off-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/r/20221120051004.3605026-2-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The member void *data in the structure devfreq can be overwrite
by governor_userspace. For example:
1. The device driver assigned the devfreq governor to simple_ondemand
by the function devfreq_add_device() and init the devfreq member
void *data to a pointer of a static structure devfreq_simple_ondemand_data
by the function devfreq_add_device().
2. The user changed the devfreq governor to userspace by the command
"echo userspace > /sys/class/devfreq/.../governor".
3. The governor userspace alloced a dynamic memory for the struct
userspace_data and assigend the member void *data of devfreq to
this memory by the function userspace_init().
4. The user changed the devfreq governor back to simple_ondemand
by the command "echo simple_ondemand > /sys/class/devfreq/.../governor".
5. The governor userspace exited and assigned the member void *data
in the structure devfreq to NULL by the function userspace_exit().
6. The governor simple_ondemand fetched the static information of
devfreq_simple_ondemand_data in the function
devfreq_simple_ondemand_func() but the member void *data of devfreq was
assigned to NULL by the function userspace_exit().
7. The information of upthreshold and downdifferential is lost
and the governor simple_ondemand can't work correctly.
The member void *data in the structure devfreq is designed for
a static pointer used in a governor and inited by the function
devfreq_add_device(). This patch add an element named governor_data
in the devfreq structure which can be used by a governor(E.g userspace)
who want to assign a private data to do some private things.
Fixes: ce26c5bb9569 ("PM / devfreq: Add basic governors")
Cc: stable@vger.kernel.org # 5.10+
Reviewed-by: Chanwoo Choi <cwchoi00@gmail.com>
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: Kant Fan <kant@allwinnertech.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
|
|
The PMIC does store the power-off factor internally.
Read it out and report it as bootstatus.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Acked-by: Lee Jones <lee@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20221028075019.2757812-1-marcus.folkesson@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
Add toprgu reset-controller header file for MT8188
Signed-off-by: Runyang Chen <runyang.chen@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20221026063327.20037-3-Runyang.Chen@mediatek.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
PMUv3p5 (which is mandatory with ARMv8.5) comes with some extra
features:
- All counters are 64bit
- The overflow point is controlled by the PMCR_EL0.LP bit
Add the required checks in the helpers that control counter
width and overflow, as well as the sysreg handling for the LP
bit. A new kvm_pmu_is_3p5() helper makes it easy to spot the
PMUv3p5 specific handling.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221113163832.3154370-14-maz@kernel.org
|
|
As further patches will enable the selection of a PMU revision
from userspace, sample the supported PMU revision at VM creation
time, rather than building each time the ID_AA64DFR0_EL1 register
is accessed.
This shouldn't result in any change in behaviour.
Reviewed-by: Reiji Watanabe <reijiw@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20221113163832.3154370-11-maz@kernel.org
|
|
With all users now calling {map,unmap}_pages, retire the redundant
single-page callbacks.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/a5a3cbf95c3279982e378cc43dad830322a59868.1668100209.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Add IOMMU binding documentation for the MT8365 SoC.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Yong Wu <yong.wu@mediatek.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20221001-iommu-support-v6-1-be4fe8da254b@baylibre.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
I've added a flex array to struct nlmsghdr in
commit 738136a0e375 ("netlink: split up copies in the ack construction")
to allow accessing the data easily. It leads to warnings with clang,
if user space wraps this structure into another struct and the flex
array is not at the end of the container.
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/all/20221114023927.GA685@u2004-local/
Link: https://lore.kernel.org/r/20221118033903.1651026-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The user usually configures the number of sge through the max_send_sge
parameter when creating qp, and configures the maximum size of inline data
that can be sent through max_inline_data. Inline uses sge to fill data to
send. Expect the following:
1) When the sge space cannot hold inline data, the sge space needs to be
expanded to accommodate all inline data
2) When the sge space is enough to accommodate inline data, the upper
limit of inline data can be increased so that users can send larger
inline data
Currently case one is not implemented. When the inline data is larger than
the sge space, an error of insufficient sge space occurs. This part of
the code needs to be reimplemented according to the expected rules. The
calculation method of sge num is modified to take the maximum value of
max_send_sge and the sge for max_inline_data to solve this problem.
Fixes: 05201e01be93 ("RDMA/hns: Refactor process of setting extended sge")
Fixes: 30b707886aeb ("RDMA/hns: Support inline data in extented sge space for RC")
Link: https://lore.kernel.org/r/20221108133847.2304539-3-xuhaoyue1@hisilicon.com
Signed-off-by: Luoyouming <luoyouming@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Pull io_uring fixes from Jens Axboe:
"This is mostly fixing issues around the poll rework, but also two
tweaks for the multishot handling for accept and receive.
All stable material"
* tag 'io_uring-6.1-2022-11-18' of git://git.kernel.dk/linux:
io_uring: disallow self-propelled ring polling
io_uring: fix multishot recv request leaks
io_uring: fix multishot accept request leaks
io_uring: fix tw losing poll events
io_uring: update res mask in io_poll_check_events
|
|
The vfs_getxattr_alloc() function currently returns a ssize_t value
despite the fact that it only uses int values internally for return
values. Fix this by converting vfs_getxattr_alloc() to return an
int type and adjust the callers as necessary. As part of these
caller modifications, some of the callers are fixed to properly free
the xattr value buffer on both success and failure to ensure that
memory is not leaked in the failure case.
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request via Christoph:
- Two more bogus nid quirks (Bean Huo, Tiago Dias Ferreira)
- Memory leak fix in nvmet (Sagi Grimberg)
- Regression fix for block cgroups pinning the wrong blkcg, causing
leaks of cgroups and blkcgs (Chris)
- UAF fix for drbd setup error handling (Dan)
- Fix DMA alignment propagation in DM (Keith)
* tag 'block-6.1-2022-11-18' of git://git.kernel.dk/linux:
dm-log-writes: set dma_alignment limit in io_hints
dm-integrity: set dma_alignment limit in io_hints
block: make blk_set_default_limits() private
dm-crypt: provide dma_alignment limit in io_hints
block: make dma_alignment a stacking queue_limit
nvmet: fix a memory leak in nvmet_auth_set_key
nvme-pci: add NVME_QUIRK_BOGUS_NID for Netac NV7000
drbd: use after free in drbd_create_device()
nvme-pci: add NVME_QUIRK_BOGUS_NID for Micron Nitro
blk-cgroup: properly pin the parent in blkcg_css_online
|
|
Most /proc files don't have length (in fstat sense). This leads to
inefficiencies when reading such files with APIs commonly found in modern
programming languages. They open file, then fstat descriptor, get st_size
== 0 and either assume file is empty or start reading without knowing
target size.
cat(1) does OK because it uses large enough buffer by default. But naive
programs copy-pasted from SO aren't:
let mut f = std::fs::File::open("/proc/cmdline").unwrap();
let mut buf: Vec<u8> = Vec::new();
f.read_to_end(&mut buf).unwrap();
will result in
openat(AT_FDCWD, "/proc/cmdline", O_RDONLY|O_CLOEXEC) = 3
statx(0, NULL, AT_STATX_SYNC_AS_STAT, STATX_ALL, NULL) = -1 EFAULT (Bad address)
statx(3, "", AT_STATX_SYNC_AS_STAT|AT_EMPTY_PATH, STATX_ALL, {stx_mask=STATX_BASIC_STATS|STATX_MNT_ID, stx_attributes=0, stx_mode=S_IFREG|0444, stx_size=0, ...}) = 0
lseek(3, 0, SEEK_CUR) = 0
read(3, "BOOT_IMAGE=(hd3,gpt2)/vmlinuz-5.", 32) = 32
read(3, "19.6-100.fc35.x86_64 root=/dev/m", 32) = 32
read(3, "apper/fedora_localhost--live-roo"..., 64) = 64
read(3, "ocalhost--live-swap rd.lvm.lv=fe"..., 128) = 116
read(3, "", 12)
open/stat is OK, lseek looks silly but there are 3 unnecessary reads
because Rust starts with 32 bytes per Vec<u8> and grows from there.
In case of /proc/cmdline, the length is known precisely.
Make variables readonly while I'm at it.
P.S.: I tried to scp /proc/cpuinfo today and got empty file
but this is separate story.
Link: https://lkml.kernel.org/r/YxoywlbM73JJN3r+@localhost.localdomain
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently the clamp algorithm does:
if (val > hi)
val = hi;
if (val < lo)
val = lo;
But since hi > lo by definition, this can be made more efficient with:
if (val > hi)
val = hi;
else if (val < lo)
val = lo;
So fix up the clamp and clamp_t functions to do this, adding the same
argument checking as for min and min_t.
For simple cases, code generation on x86_64 and aarch64 stay about the
same:
before:
cmp edi, edx
mov eax, esi
cmova edi, edx
cmp edi, esi
cmovnb eax, edi
ret
after:
cmp edi, esi
mov eax, edx
cmovnb esi, edi
cmp edi, edx
cmovb eax, esi
ret
before:
cmp w0, w2
csel w8, w0, w2, lo
cmp w8, w1
csel w0, w8, w1, hi
ret
after:
cmp w0, w1
csel w8, w0, w1, hi
cmp w0, w2
csel w0, w8, w2, lo
ret
On MIPS64, however, code generation improves, by removing arithmetic in
the second branch:
before:
sltu $3,$6,$4
bne $3,$0,.L2
move $2,$6
move $2,$4
.L2:
sltu $3,$2,$5
bnel $3,$0,.L7
move $2,$5
.L7:
jr $31
nop
after:
sltu $3,$4,$6
beq $3,$0,.L13
move $2,$6
sltu $3,$4,$5
bne $3,$0,.L12
move $2,$4
.L13:
jr $31
nop
.L12:
jr $31
move $2,$5
For more complex cases with surrounding code, the effects are a bit
more complicated. For example, consider this simplified version of
timestamp_truncate() from fs/inode.c on x86_64:
struct timespec64 timestamp_truncate(struct timespec64 t, struct inode *inode)
{
struct super_block *sb = inode->i_sb;
unsigned int gran = sb->s_time_gran;
t.tv_sec = clamp(t.tv_sec, sb->s_time_min, sb->s_time_max);
if (t.tv_sec == sb->s_time_max || t.tv_sec == sb->s_time_min)
t.tv_nsec = 0;
return t;
}
before:
mov r8, rdx
mov rdx, rsi
mov rcx, QWORD PTR [r8]
mov rax, QWORD PTR [rcx+8]
mov rcx, QWORD PTR [rcx+16]
cmp rax, rdi
mov r8, rcx
cmovge rdi, rax
cmp rdi, rcx
cmovle r8, rdi
cmp rax, r8
je .L4
cmp rdi, rcx
jge .L4
mov rax, r8
ret
.L4:
xor edx, edx
mov rax, r8
ret
after:
mov rax, QWORD PTR [rdx]
mov rdx, QWORD PTR [rax+8]
mov rax, QWORD PTR [rax+16]
cmp rax, rdi
jg .L6
mov r8, rax
xor edx, edx
.L2:
mov rax, r8
ret
.L6:
cmp rdx, rdi
mov r8, rdi
cmovge r8, rdx
cmp rax, r8
je .L4
xor eax, eax
cmp rdx, rdi
cmovl rax, rsi
mov rdx, rax
mov rax, r8
ret
.L4:
xor edx, edx
jmp .L2
In this case, we actually gain a branch, unfortunately, because the
compiler's replacement axioms no longer as cleanly apply.
So all and all, this change is a bit of a mixed bag.
Link: https://lkml.kernel.org/r/20220926133435.1333846-2-Jason@zx2c4.com
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The clamp family of functions only makes sense if hi>=lo. If hi and lo
are compile-time constants, then raise a build error. Doing so has
already caught buggy code. This also introduces the infrastructure to
improve the clamping function in subsequent commits.
[akpm@linux-foundation.org: coding-style cleanups]
[akpm@linux-foundation.org: s@&&\@&& \@]
Link: https://lkml.kernel.org/r/20220926133435.1333846-1-Jason@zx2c4.com
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
We already have struct range, so just use it.
Link: https://lkml.kernel.org/r/20220929042936.22012-4-bhe@redhat.com
Signed-off-by: Li Chen <lchen@ambarella.com>
Signed-off-by: Baoquan He <bhe@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Chen Lifu <chenlifu@huawei.com>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Jianglei Nie <niejianglei2021@163.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: ye xingchen <ye.xingchen@zte.com.cn>
Cc: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Statistically, in a large deployment regular segfaults may indicate a CPU
issue.
Currently, it is not possible to find out what CPU the segfault happened
on. There are at least two attempts to improve segfault logging with this
regard, but they do not help in case the logs rotate.
Hence, lets make sure it is possible to permanently record a CPU the task
ran on using a new core_pattern specifier.
Link: https://lkml.kernel.org/r/20220903064330.20772-1-oleksandr@redhat.com
Signed-off-by: Oleksandr Natalenko <oleksandr@redhat.com>
Suggested-by: Renaud Métrich <rmetrich@redhat.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W . Biederman" <ebiederm@xmission.com>
Cc: Grzegorz Halat <ghalat@redhat.com>
Cc: "Guilherme G. Piccoli" <gpiccoli@igalia.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Joel Savitz <jsavitz@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kees Cook <keescook@chromium.org>
Cc: Laurent Dufour <ldufour@linux.ibm.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Stephen Kitt <steve@sk2.org>
Cc: Will Deacon <will@kernel.org>
Cc: Xiaoming Ni <nixiaoming@huawei.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
constants
It may not come clear from where the magical '64' value used in
__cpumask_to_vpset() come from. Moreover, '64' means both the maximum
sparse bank number as well as the number of vCPUs per bank. Add defines
to make things clear. These defines are also going to be used by KVM.
No functional change.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <20221101145426.251680-15-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A fair amount of commits at this time due to ASoC PR merge, but all
look small and easy, mostly device-specific fixes spanned in various
drivers. Hopefully this should be the last big chunk for 6.1"
* tag 'sound-6.1-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (21 commits)
ALSA: hda/realtek: Fix the speaker output on Samsung Galaxy Book Pro 360
ALSA: hda/realtek: fix speakers for Samsung Galaxy Book Pro
ALSA: usb-audio: Drop snd_BUG_ON() from snd_usbmidi_output_open()
ASoC: stm32: dfsdm: manage cb buffers cleanup
ASoC: sof_es8336: reduce pop noise on speaker
ASoC: SOF: topology: No need to assign core ID if token parsing failed
ASoC: soc-utils: Remove __exit for snd_soc_util_exit()
ASoC: rt5677: fix legacy dai naming
ASoC: rt5514: fix legacy dai naming
ASoC: SOF: ipc3-topology: use old pipeline teardown flow with SOF2.1 and older
ASoC: hda: intel-dsp-config: add ES83x6 quirk for IceLake
ASoC: Intel: soc-acpi: add ES83x6 support to IceLake
ASoC: tas2780: Fix set_tdm_slot in case of single slot
ASoC: tas2764: Fix set_tdm_slot in case of single slot
ASoC: tas2770: Fix set_tdm_slot in case of single slot
ASoC: fsl_asrc fsl_esai fsl_sai: allow CONFIG_PM=N
ASoC: core: Fix use-after-free in snd_soc_exit()
MAINTAINERS: update Tzung-Bi's email address
ASoC: Intel: bytcht_es8316: Add quirk for the Nanote UMPC-01
ASoC: amd: yc: Add Alienware m17 R5 AMD into DMI table
...
|
|
Mark the devm_*alloc()-family of allocations with appropriate
__alloc_size()/__realloc_size() hints so the compiler can attempt to
reason about buffer lengths from allocations.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Nishanth Menon <nm@ti.com>
Cc: Michael Kelley <mikelley@microsoft.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Won Chung <wonchung@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20221029074734.gonna.276-kees@kernel.org
|
|
Since gfn_to_memslot() is relatively expensive, it helps to
skip it if it the memslot cannot possibly have dirty logging
enabled. In order to do this, add to struct kvm a counter
of the number of log-page memslots. While the correct value
can only be read with slots_lock taken, the NX recovery thread
is content with using an approximate value. Therefore, the
counter is an atomic_t.
Based on https://lore.kernel.org/kvm/20221027200316.2221027-2-dmatlack@google.com/
by David Matlack.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
