summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2024-12-05mm/codetag: swap tags when migrate pagesDavid Wang
Current solution to adjust codetag references during page migration is done in 3 steps: 1. sets the codetag reference of the old page as empty (not pointing to any codetag); 2. subtracts counters of the new page to compensate for its own allocation; 3. sets codetag reference of the new page to point to the codetag of the old page. This does not work if CONFIG_MEM_ALLOC_PROFILING_DEBUG=n because set_codetag_empty() becomes NOOP. Instead, let's simply swap codetag references so that the new page is referencing the old codetag and the old page is referencing the new codetag. This way accounting stays valid and the logic makes more sense. Link: https://lkml.kernel.org/r/20241129025213.34836-1-00107082@163.com Fixes: e0a955bf7f61 ("mm/codetag: add pgalloc_tag_copy()") Signed-off-by: David Wang <00107082@163.com> Closes: https://lore.kernel.org/lkml/20241124074318.399027-1-00107082@163.com/ Acked-by: Suren Baghdasaryan <surenb@google.com> Suggested-by: Suren Baghdasaryan <surenb@google.com> Acked-by: Yu Zhao <yuzhao@google.com> Cc: Kent Overstreet <kent.overstreet@linux.dev> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-12-05stackdepot: fix stack_depot_save_flags() in NMI contextMarco Elver
Per documentation, stack_depot_save_flags() was meant to be usable from NMI context if STACK_DEPOT_FLAG_CAN_ALLOC is unset. However, it still would try to take the pool_lock in an attempt to save a stack trace in the current pool (if space is available). This could result in deadlock if an NMI is handled while pool_lock is already held. To avoid deadlock, only try to take the lock in NMI context and give up if unsuccessful. The documentation is fixed to clearly convey this. Link: https://lkml.kernel.org/r/Z0CcyfbPqmxJ9uJH@elver.google.com Link: https://lkml.kernel.org/r/20241122154051.3914732-1-elver@google.com Fixes: 4434a56ec209 ("stackdepot: make fast paths lock-less again") Signed-off-by: Marco Elver <elver@google.com> Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-12-05mm: open-code PageTail in folio_flags() and const_folio_flags()Matthew Wilcox (Oracle)
It is unsafe to call PageTail() in dump_page() as page_is_fake_head() will almost certainly return true when called on a head page that is copied to the stack. That will cause the VM_BUG_ON_PGFLAGS() in const_folio_flags() to trigger when it shouldn't. Fortunately, we don't need to call PageTail() here; it's fine to have a pointer to a virtual alias of the page's flag word rather than the real page's flag word. Link: https://lkml.kernel.org/r/20241125201721.2963278-1-willy@infradead.org Fixes: fae7d834c43c ("mm: add __dump_folio()") Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Kees Cook <kees@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-12-05Merge tag 'for-linus-iommufd' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd Pull iommufd fixes from Jason Gunthorpe: "One bug fix and some documentation updates: - Correct typos in comments - Elaborate a comment about how the uAPI works for IOMMU_HW_INFO_TYPE_ARM_SMMUV3 - Fix a double free on error path and add test coverage for the bug" * tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: iommu/arm-smmu-v3: Improve uAPI comment for IOMMU_HW_INFO_TYPE_ARM_SMMUV3 iommufd/selftest: Cover IOMMU_FAULT_QUEUE_ALLOC in iommufd_fail_nth iommufd: Fix out_fput in iommufd_fault_alloc() iommufd: Fix typos in kernel-doc comments
2024-12-06Merge tag 'drm-misc-fixes-2024-12-05' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes drm-misc-fixes v6.13-rc2: - v3d performance counter fix. - A lot of DP-MST related fixes. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/2ce1650d-801f-4265-a876-5a8743f1c82b@linux.intel.com
2024-12-05Merge tag 'net-6.13-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from can and netfilter. Current release - regressions: - rtnetlink: fix double call of rtnl_link_get_net_ifla() - tcp: populate XPS related fields of timewait sockets - ethtool: fix access to uninitialized fields in set RXNFC command - selinux: use sk_to_full_sk() in selinux_ip_output() Current release - new code bugs: - net: make napi_hash_lock irq safe - eth: - bnxt_en: support header page pool in queue API - ice: fix NULL pointer dereference in switchdev Previous releases - regressions: - core: fix icmp host relookup triggering ip_rt_bug - ipv6: - avoid possible NULL deref in modify_prefix_route() - release expired exception dst cached in socket - smc: fix LGR and link use-after-free issue - hsr: avoid potential out-of-bound access in fill_frame_info() - can: hi311x: fix potential use-after-free - eth: ice: fix VLAN pruning in switchdev mode Previous releases - always broken: - netfilter: - ipset: hold module reference while requesting a module - nft_inner: incorrect percpu area handling under softirq - can: j1939: fix skb reference counting - eth: - mlxsw: use correct key block on Spectrum-4 - mlx5: fix memory leak in mlx5hws_definer_calc_layout" * tag 'net-6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (76 commits) net :mana :Request a V2 response version for MANA_QUERY_GF_STAT net: avoid potential UAF in default_operstate() vsock/test: verify socket options after setting them vsock/test: fix parameter types in SO_VM_SOCKETS_* calls vsock/test: fix failures due to wrong SO_RCVLOWAT parameter net/mlx5e: Remove workaround to avoid syndrome for internal port net/mlx5e: SD, Use correct mdev to build channel param net/mlx5: E-Switch, Fix switching to switchdev mode in MPV net/mlx5: E-Switch, Fix switching to switchdev mode with IB device disabled net/mlx5: HWS: Properly set bwc queue locks lock classes net/mlx5: HWS: Fix memory leak in mlx5hws_definer_calc_layout bnxt_en: handle tpa_info in queue API implementation bnxt_en: refactor bnxt_alloc_rx_rings() to call bnxt_alloc_rx_agg_bmap() bnxt_en: refactor tpa_info alloc/free into helpers geneve: do not assume mac header is set in geneve_xmit_skb() mlxsw: spectrum_acl_flex_keys: Use correct key block on Spectrum-4 ethtool: Fix wrong mod state in case of verbose and no_mask bitset ipmr: tune the ipmr_can_free_table() checks. netfilter: nft_set_hash: skip duplicated elements pending gc run netfilter: ipset: Hold module reference while requesting a module ...
2024-12-05Merge tag 'hid-for-linus-2024120501' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fixes from Benjamin Tissoires: - regression fix in suspend/resume for i2c-hid (Kenny Levinsen) - fix wacom driver assuming a name can not be null (WangYuli) - a couple of constify changes/fixes (Thomas Weißschuh) - a couple of selftests/hid fixes (Maximilian Heyne & Benjamin Tissoires) * tag 'hid-for-linus-2024120501' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: selftests/hid: fix kfunc inclusions with newer bpftool HID: bpf: drop unneeded casts discarding const HID: bpf: constify hid_ops selftests: hid: fix typo and exit code HID: wacom: fix when get product name maybe null pointer HID: i2c-hid: Revert to using power commands to wake on resume
2024-12-05Merge tag 'linux-watchdog-6.13-rc1' of ↵Linus Torvalds
git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - Add support for exynosautov920 SoC - Add support for Airoha EN7851 watchdog - Add support for MT6735 TOPRGU/WDT - Delete the cpu5wdt driver - Always print when registering watchdog fails - Several other small fixes and improvements * tag 'linux-watchdog-6.13-rc1' of git://www.linux-watchdog.org/linux-watchdog: (36 commits) watchdog: rti: of: honor timeout-sec property watchdog: s3c2410_wdt: add support for exynosautov920 SoC dt-bindings: watchdog: Document ExynosAutoV920 watchdog bindings watchdog: mediatek: Add support for MT6735 TOPRGU/WDT watchdog: mediatek: Make sure system reset gets asserted in mtk_wdt_restart() dt-bindings: watchdog: fsl-imx-wdt: Add missing 'big-endian' property dt-bindings: watchdog: Document Qualcomm QCS8300 docs: ABI: Fix spelling mistake in pretimeout_avaialable_governors Revert "watchdog: s3c2410_wdt: use exynos_get_pmu_regmap_by_phandle() for PMU regs" watchdog: rzg2l_wdt: Power on the watchdog domain in the restart handler watchdog: Switch back to struct platform_driver::remove() watchdog: it87_wdt: add PWRGD enable quirk for Qotom QCML04 watchdog: da9063: Remove __maybe_unused notations watchdog: da9063: Do not use a global variable watchdog: Delete the cpu5wdt driver watchdog: Add support for Airoha EN7851 watchdog dt-bindings: watchdog: airoha: document watchdog for Airoha EN7581 watchdog: sl28cpld_wdt: don't print out if registering watchdog fails watchdog: rza_wdt: don't print out if registering watchdog fails watchdog: rti_wdt: don't print out if registering watchdog fails ...
2024-12-05clocksource: Make negative motion detection more robustThomas Gleixner
Guenter reported boot stalls on a emulated ARM 32-bit platform, which has a 24-bit wide clocksource. It turns out that the calculated maximal idle time, which limits idle sleeps to prevent clocksource wrap arounds, is close to the point where the negative motion detection triggers. max_idle_ns: 597268854 ns negative motion tripping point: 671088640 ns If the idle wakeup is delayed beyond that point, the clocksource advances far enough to trigger the negative motion detection. This prevents the clock to advance and in the worst case the system stalls completely if the consecutive sleeps based on the stale clock are delayed as well. Cure this by calculating a more robust cut-off value for negative motion, which covers 87.5% of the actual clocksource counter width. Compare the delta against this value to catch negative motion. This is specifically for clock sources with a small counter width as their wrap around time is close to the half counter width. For clock sources with wide counters this is not a problem because the maximum idle time is far from the half counter width due to the math overflow protection constraints. For the case at hand this results in a tripping point of 1174405120ns. Note, that this cannot prevent issues when the delay exceeds the 87.5% margin, but that's not different from the previous unchecked version which allowed arbitrary time jumps. Systems with small counter width are prone to invalid results, but this problem is unlikely to be seen on real hardware. If such a system completely stalls for more than half a second, then there are other more urgent problems than the counter wrapping around. Fixes: c163e40af9b2 ("timekeeping: Always check for negative motion") Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/all/8734j5ul4x.ffs@tglx Closes: https://lore.kernel.org/all/387b120b-d68a-45e8-b6ab-768cd95d11c2@roeck-us.net
2024-12-05drm/dp_mst: Fix resetting msg rx state after topology removalImre Deak
If the MST topology is removed during the reception of an MST down reply or MST up request sideband message, the drm_dp_mst_topology_mgr::up_req_recv/down_rep_recv states could be reset from one thread via drm_dp_mst_topology_mgr_set_mst(false), racing with the reading/parsing of the message from another thread via drm_dp_mst_handle_down_rep() or drm_dp_mst_handle_up_req(). The race is possible since the reader/parser doesn't hold any lock while accessing the reception state. This in turn can lead to a memory corruption in the reader/parser as described by commit bd2fccac61b4 ("drm/dp_mst: Fix MST sideband message body length check"). Fix the above by resetting the message reception state if needed before reading/parsing a message. Another solution would be to hold the drm_dp_mst_topology_mgr::lock for the whole duration of the message reception/parsing in drm_dp_mst_handle_down_rep() and drm_dp_mst_handle_up_req(), however this would require a bigger change. Since the fix is also needed for stable, opting for the simpler solution in this patch. Cc: Lyude Paul <lyude@redhat.com> Cc: <stable@vger.kernel.org> Fixes: 1d082618bbf3 ("drm/display/dp_mst: Fix down/up message handling after sink disconnect") Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13056 Reviewed-by: Lyude Paul <lyude@redhat.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241203160223.2926014-2-imre.deak@intel.com
2024-12-05Merge tag 'nf-24-12-05' of ↵Paolo Abeni
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Fix esoteric undefined behaviour due to uninitialized stack access in ip_vs_protocol_init(), from Jinghao Jia. 2) Fix iptables xt_LED slab-out-of-bounds due to incorrect sanitization of the led string identifier, reported by syzbot. Patch from Dmitry Antipov. 3) Remove WARN_ON_ONCE reachable from userspace to check for the maximum cgroup level, nft_socket cgroup matching is restricted to 255 levels, but cgroups allow for INT_MAX levels by default. Reported by syzbot. 4) Fix nft_inner incorrect use of percpu area to store tunnel parser context with softirqs, resulting in inconsistent inner header offsets that could lead to bogus rule mismatches, reported by syzbot. 5) Grab module reference on ipset core while requesting set type modules, otherwise kernel crash is possible by removing ipset core module, patch from Phil Sutter. 6) Fix possible double-free in nft_hash garbage collector due to unstable walk interator that can provide twice the same element. Use a sequence number to skip expired/dead elements that have been already scheduled for removal. Based on patch from Laurent Fasnach netfilter pull request 24-12-05 * tag 'nf-24-12-05' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nft_set_hash: skip duplicated elements pending gc run netfilter: ipset: Hold module reference while requesting a module netfilter: nft_inner: incorrect percpu area handling under softirq netfilter: nft_socket: remove WARN_ON_ONCE on maximum cgroup level netfilter: x_tables: fix LED ID check in led_tg_check() ipvs: fix UB due to uninitialized stack access in ip_vs_protocol_init() ==================== Link: https://patch.msgid.link/20241205002854.162490-1-pablo@netfilter.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-05RDMA/mlx5: Enforce same type port association for multiport RoCEPatrisious Haddad
Different core device types such as PFs and VFs shouldn't be affiliated together since they have different capabilities, fix that by enforcing type check before doing the affiliation. Fixes: 32f69e4be269 ("{net, IB}/mlx5: Manage port association for multiport RoCE") Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Patrisious Haddad <phaddad@nvidia.com> Link: https://patch.msgid.link/88699500f690dff1c1852c1ddb71f8a1cc8b956e.1733233480.git.leonro@nvidia.com Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com> Signed-off-by: Leon Romanovsky <leon@kernel.org>
2024-12-04ipmr: tune the ipmr_can_free_table() checks.Paolo Abeni
Eric reported a syzkaller-triggered splat caused by recent ipmr changes: WARNING: CPU: 2 PID: 6041 at net/ipv6/ip6mr.c:419 ip6mr_free_table+0xbd/0x120 net/ipv6/ip6mr.c:419 Modules linked in: CPU: 2 UID: 0 PID: 6041 Comm: syz-executor183 Not tainted 6.12.0-syzkaller-10681-g65ae975e97d5 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 RIP: 0010:ip6mr_free_table+0xbd/0x120 net/ipv6/ip6mr.c:419 Code: 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 75 58 49 83 bc 24 c0 0e 00 00 00 74 09 e8 44 ef a9 f7 90 <0f> 0b 90 e8 3b ef a9 f7 48 8d 7b 38 e8 12 a3 96 f7 48 89 df be 0f RSP: 0018:ffffc90004267bd8 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffff88803c710000 RCX: ffffffff89e4d844 RDX: ffff88803c52c880 RSI: ffffffff89e4d87c RDI: ffff88803c578ec0 RBP: 0000000000000001 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000001 R12: ffff88803c578000 R13: ffff88803c710000 R14: ffff88803c710008 R15: dead000000000100 FS: 00007f7a855ee6c0(0000) GS:ffff88806a800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7a85689938 CR3: 000000003c492000 CR4: 0000000000352ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ip6mr_rules_exit+0x176/0x2d0 net/ipv6/ip6mr.c:283 ip6mr_net_exit_batch+0x53/0xa0 net/ipv6/ip6mr.c:1388 ops_exit_list+0x128/0x180 net/core/net_namespace.c:177 setup_net+0x4fe/0x860 net/core/net_namespace.c:394 copy_net_ns+0x2b4/0x6b0 net/core/net_namespace.c:500 create_new_namespaces+0x3ea/0xad0 kernel/nsproxy.c:110 unshare_nsproxy_namespaces+0xc0/0x1f0 kernel/nsproxy.c:228 ksys_unshare+0x45d/0xa40 kernel/fork.c:3334 __do_sys_unshare kernel/fork.c:3405 [inline] __se_sys_unshare kernel/fork.c:3403 [inline] __x64_sys_unshare+0x31/0x40 kernel/fork.c:3403 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f7a856332d9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 51 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f7a855ee238 EFLAGS: 00000246 ORIG_RAX: 0000000000000110 RAX: ffffffffffffffda RBX: 00007f7a856bd308 RCX: 00007f7a856332d9 RDX: 00007f7a8560f8c6 RSI: 0000000000000000 RDI: 0000000062040200 RBP: 00007f7a856bd300 R08: 00007fff932160a7 R09: 00007f7a855ee6c0 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f7a856bd30c R13: 0000000000000000 R14: 00007fff93215fc0 R15: 00007fff932160a8 </TASK> The root cause is a network namespace creation failing after successful initialization of the ipmr subsystem. Such a case is not currently matched by the ipmr_can_free_table() helper. New namespaces are zeroed on allocation and inserted into net ns list only after successful creation; when deleting an ipmr table, the list next pointer can be NULL only on netns initialization failure. Update the ipmr_can_free_table() checks leveraging such condition. Reported-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot+6e8cb445d4b43d006e0c@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=6e8cb445d4b43d006e0c Fixes: 11b6e701bce9 ("ipmr: add debug check for mr table cleanup") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/8bde975e21bbca9d9c27e36209b2dd4f1d7a3f00.1733212078.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-04scsi: ufs: core: Add missing post notify for power mode changePeter Wang
When the power mode change is successful but the power mode hasn't actually changed, the post notification was missed. Similar to the approach with hibernate/clock scale/hce enable, having pre/post notifications in the same function will make it easier to maintain. Additionally, supplement the description of power parameters for the pwr_change_notify callback. Fixes: 7eb584db73be ("ufs: refactor configuring power mode") Cc: stable@vger.kernel.org #6.11.x Signed-off-by: Peter Wang <peter.wang@mediatek.com> Link: https://lore.kernel.org/r/20241122024943.30589-1-peter.wang@mediatek.com Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-12-04dmaengine: amd: qdma: Remove using the private get and set dma_ops APIsLizhi Hou
The get_dma_ops and set_dma_ops APIs were never for driver to use. Remove these calls from QDMA driver. Instead, pass the DMA device pointer from the qdma_platdata structure. Fixes: 73d5fc92a11c ("dmaengine: amd: qdma: Add AMD QDMA driver") Signed-off-by: Lizhi Hou <lizhi.hou@amd.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20240918181022.2155715-1-lizhi.hou@amd.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-12-04linux/dmaengine.h: fix a few kernel-doc warningsRandy Dunlap
The comment block for "Interleaved Transfer Request" should not begin with "/**" since it is not in kernel-doc format. Fix doc name for enum sum_check_flags. Fix all (4) missing struct member warnings. Use "Warning:" for one "Note:" in enum dma_desc_metadata_mode since scripts/kernel-doc does not allow more than one Note: per function or identifier description. This leaves around 49 kernel-doc warnings like: include/linux/dmaengine.h:43: warning: Enum value 'DMA_OUT_OF_ORDER' not described in enum 'dma_status' and another scripts/kernel-doc problem with it not being able to parse some typedefs. Fixes: b14dab792dee ("DMAEngine: Define interleaved transfer request api") Fixes: ad283ea4a3ce ("async_tx: add sum check flags") Fixes: 272420214d26 ("dmaengine: Add DMA_CTRL_REUSE") Fixes: f067025bc676 ("dmaengine: add support to provide error result from a DMA transation") Fixes: d38a8c622a1b ("dmaengine: prepare for generic 'unmap' data") Fixes: 5878853fc938 ("dmaengine: Add API function dmaengine_prep_peripheral_dma_vec()") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Paul Cercueil <paul@crapouillou.net> Cc: Nuno Sa <nuno.sa@analog.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: dmaengine@vger.kernel.org Link: https://lore.kernel.org/r/20241202172004.76020-1-rdunlap@infradead.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-12-04firmware: arm_ffa: Fix the race around setting ffa_dev->propertiesLevi Yun
Currently, ffa_dev->properties is set after the ffa_device_register() call return in ffa_setup_partitions(). This could potentially result in a race where the partition's properties is accessed while probing struct ffa_device before it is set. Update the ffa_device_register() to receive ffa_partition_info so all the data from the partition information received from the firmware can be updated into the struct ffa_device before the calling device_register() in ffa_device_register(). Fixes: e781858488b9 ("firmware: arm_ffa: Add initial FFA bus support for device enumeration") Signed-off-by: Levi Yun <yeoreum.yun@arm.com> Message-Id: <20241203143109.1030514-2-yeoreum.yun@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2024-12-03netfilter: nft_inner: incorrect percpu area handling under softirqPablo Neira Ayuso
Softirq can interrupt ongoing packet from process context that is walking over the percpu area that contains inner header offsets. Disable bh and perform three checks before restoring the percpu inner header offsets to validate that the percpu area is valid for this skbuff: 1) If the NFT_PKTINFO_INNER_FULL flag is set on, then this skbuff has already been parsed before for inner header fetching to register. 2) Validate that the percpu area refers to this skbuff using the skbuff pointer as a cookie. If there is a cookie mismatch, then this skbuff needs to be parsed again. 3) Finally, validate if the percpu area refers to this tunnel type. Only after these three checks the percpu area is restored to a on-stack copy and bh is enabled again. After inner header fetching, the on-stack copy is stored back to the percpu area. Fixes: 3a07327d10a0 ("netfilter: nft_inner: support for inner tunnel header matching") Reported-by: syzbot+84d0441b9860f0d63285@syzkaller.appspotmail.com Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-12-03iommu/arm-smmu-v3: Improve uAPI comment for IOMMU_HW_INFO_TYPE_ARM_SMMUV3Jason Gunthorpe
Be specific about what fields should be accessed in the idr result and give other guidance to the VMM on how it should generate the vIDR. Discussion on the list, and review of the qemu implementation understood this needs to be clearer and more detailed. Link: https://patch.msgid.link/r/0-v1-191e5e24cec3+3b0-iommufd_smmuv3_hwinf_jgg@nvidia.com Reviewed-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2024-12-03module: Convert default symbol namespace to string literalMasahiro Yamada
Commit cdd30ebb1b9f ("module: Convert symbol namespace to string literal") only converted MODULE_IMPORT_NS() and EXPORT_SYMBOL_NS(), leaving DEFAULT_SYMBOL_NAMESPACE as a macro expansion. This commit converts DEFAULT_SYMBOL_NAMESPACE in the same way to avoid annoyance for the default namespace as well. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-12-03iommufd: Fix typos in kernel-doc commentsRandy Dunlap
Fix typos/spellos in kernel-doc comments for readability. Fixes: aad37e71d5c4 ("iommufd: IOCTLs for the io_pagetable") Fixes: b7a0855eb95f ("iommu: Add new flag to explictly request PASID capable domain") Fixes: d68beb276ba2 ("iommu/arm-smmu-v3: Support IOMMU_HWPT_INVALIDATE using a VIOMMU object") Link: https://patch.msgid.link/r/20241128035159.374624-1-rdunlap@infradead.org Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Nicolin Chen <nicolinc@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2024-12-03io_uring: Change res2 parameter type in io_uring_cmd_doneBernd Schubert
Change the type of the res2 parameter in io_uring_cmd_done from ssize_t to u64. This aligns the parameter type with io_req_set_cqe32_extra, which expects u64 arguments. The change eliminates potential issues on 32-bit architectures where ssize_t might be 32-bit. Only user of passing res2 is drivers/nvme/host/ioctl.c and it actually passes u64. Fixes: ee692a21e9bf ("fs,io_uring: add infrastructure for uring-cmd") Cc: stable@vger.kernel.org Reviewed-by: Kanchan Joshi <joshi.k@samsung.com> Tested-by: Li Zetao <lizetao1@huawei.com> Reviewed-by: Li Zetao <lizetao1@huawei.com> Signed-off-by: Bernd Schubert <bschubert@ddn.com> Link: https://lore.kernel.org/r/20241203-io_uring_cmd_done-res2-as-u64-v2-1-5e59ae617151@ddn.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-12-03wifi: mac80211: fix vif addr when switching from monitor to stationFelix Fietkau
Since adding support for opting out of virtual monitor support, a zero vif addr was used to indicate passive vs active monitor to the driver. This would break the vif->addr when changing the netdev mac address before switching the interface from monitor to sta mode. Fix the regression by adding a separate flag to indicate whether vif->addr is valid. Reported-by: syzbot+9ea265d998de25ac6a46@syzkaller.appspotmail.com Fixes: 9d40f7e32774 ("wifi: mac80211: add flag to opt out of virtual monitor support") Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://patch.msgid.link/20241115115850.37449-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-12-03wifi: mac80211: fix a queue stall in certain cases of CSAEmmanuel Grumbach
If we got an unprotected action frame with CSA and then we heard the beacon with the CSA IE, we'll block the queues with the CSA reason twice. Since this reason is refcounted, we won't wake up the queues since we wake them up only once and the ref count will never reach 0. This led to blocked queues that prevented any activity (even disconnection wouldn't reset the queue state and the only way to recover would be to reload the kernel module. Fix this by not refcounting the CSA reason. It becomes now pointless to maintain the csa_blocked_queues state. Remove it. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Fixes: 414e090bc41d ("wifi: mac80211: restrict public action ECSA frame handling") Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219447 Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com> Link: https://patch.msgid.link/20241119173108.5ea90828c2cc.I4f89e58572fb71ae48e47a81e74595cac410fbac@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2024-12-02module: Convert symbol namespace to string literalPeter Zijlstra
Clean up the existing export namespace code along the same lines of commit 33def8498fdd ("treewide: Convert macro and uses of __section(foo) to __section("foo")") and for the same reason, it is not desired for the namespace argument to be a macro expansion itself. Scripted using git grep -l -e MODULE_IMPORT_NS -e EXPORT_SYMBOL_NS | while read file; do awk -i inplace ' /^#define EXPORT_SYMBOL_NS/ { gsub(/__stringify\(ns\)/, "ns"); print; next; } /^#define MODULE_IMPORT_NS/ { gsub(/__stringify\(ns\)/, "ns"); print; next; } /MODULE_IMPORT_NS/ { $0 = gensub(/MODULE_IMPORT_NS\(([^)]*)\)/, "MODULE_IMPORT_NS(\"\\1\")", "g"); } /EXPORT_SYMBOL_NS/ { if ($0 ~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+),/) { if ($0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/ && $0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(\)/ && $0 !~ /^my/) { getline line; gsub(/[[:space:]]*\\$/, ""); gsub(/[[:space:]]/, "", line); $0 = $0 " " line; } $0 = gensub(/(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)\)/, "\\1(\\2, \"\\3\")", "g"); } } { print }' $file; done Requested-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://mail.google.com/mail/u/2/#inbox/FMfcgzQXKWgMmjdFwwdsfgxzKpVHWPlc Acked-by: Greg KH <gregkh@linuxfoundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-12-02sched/isolation: Consolidate housekeeping cpumasks that are always identicalWaiman Long
The housekeeping cpumasks are only set by two boot commandline parameters: "nohz_full" and "isolcpus". When there is more than one of "nohz_full" or "isolcpus", the extra ones must have the same CPU list or the setup will fail partially. The HK_TYPE_DOMAIN and HK_TYPE_MANAGED_IRQ types are settable by "isolcpus" only and their settings can be independent of the other types. The other housekeeping types are all set by "nohz_full" or "isolcpus=nohz" without a way to set them individually. So they all have identical cpumasks. There is actually no point in having different cpumasks for these "nohz_full" only housekeeping types. Consolidate these types to use the same cpumask by aliasing them to the same value. If there is a need to set any of them independently in the future, we can break them out to their own cpumasks again. With this change, the number of cpumasks in the housekeeping structure drops from 9 to 3. Other than that, there should be no other functional change. Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20241030175253.125248-4-longman@redhat.com
2024-12-02sched/core: Remove HK_TYPE_SCHEDWaiman Long
The HK_TYPE_SCHED housekeeping type is defined but not set anywhere. So any code that try to use HK_TYPE_SCHED are essentially dead code. So remove HK_TYPE_SCHED and any code that use it. Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/20241030175253.125248-2-longman@redhat.com
2024-12-02locking/ww_mutex: Fix ww_mutex dummy lockdep map selftest warningsThomas Hellström
The below commit introduces a dummy lockdep map, but didn't get the initialization quite right (it should mimic the initialization of the real ww_mutex lockdep maps). It also introduced a separate locking api selftest failure. Fix these. Closes: https://lore.kernel.org/lkml/Zw19sMtnKdyOVQoh@boqun-archlinux/ Fixes: 823a566221a5 ("locking/ww_mutex: Adjust to lockdep nest_lock requirements") Reported-by: Boqun Feng <boqun.feng@gmail.com> Suggested-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20241127085430.3045-1-thomas.hellstrom@linux.intel.com
2024-12-02objtool: Fix ANNOTATE_REACHABLE to be a normal annotationPeter Zijlstra
Currently REACHABLE is weird for being on the instruction after the instruction it modifies. Since all REACHABLE annotations have an explicit instruction, flip them around. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Link: https://lore.kernel.org/r/20241128094312.494176035@infradead.org
2024-12-02objtool: Convert {.UN}REACHABLE to ANNOTATEPeter Zijlstra
Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Link: https://lore.kernel.org/r/20241128094312.353431347@infradead.org
2024-12-02objtool: Remove annotate_{,un}reachable()Peter Zijlstra
There are no users of annotate_reachable() left. And the annotate_unreachable() usage in unreachable() is plain wrong; it will hide dangerous fall-through code-gen. Remove both. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Link: https://lore.kernel.org/r/20241128094312.235637588@infradead.org
2024-12-02unreachable: UnifyPeter Zijlstra
Since barrier_before_unreachable() is empty for !GCC it is trivial to unify the two definitions. Less is more. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Link: https://lore.kernel.org/r/20241128094311.924381359@infradead.org
2024-12-02objtool: Collect more annotations in objtool.hPeter Zijlstra
Suggested-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Link: https://lore.kernel.org/r/20241128094311.786598147@infradead.org
2024-12-02objtool: Convert ANNOTATE_INTRA_FUNCTION_CALL to ANNOTATEPeter Zijlstra
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Link: https://lore.kernel.org/r/20241128094311.584892071@infradead.org
2024-12-02objtool: Convert ANNOTATE_IGNORE_ALTERNATIVE to ANNOTATEPeter Zijlstra
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Link: https://lore.kernel.org/r/20241128094311.465691316@infradead.org
2024-12-02objtool: Convert VALIDATE_UNRET_BEGIN to ANNOTATEPeter Zijlstra
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Link: https://lore.kernel.org/r/20241128094311.358508242@infradead.org
2024-12-02objtool: Convert instrumentation_{begin,end}() to ANNOTATEPeter Zijlstra
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Link: https://lore.kernel.org/r/20241128094311.245980207@infradead.org
2024-12-02objtool: Convert ANNOTATE_RETPOLINE_SAFE to ANNOTATEPeter Zijlstra
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Link: https://lore.kernel.org/r/20241128094311.145275669@infradead.org
2024-12-02objtool: Convert ANNOTATE_NOENDBR to ANNOTATEPeter Zijlstra
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Link: https://lore.kernel.org/r/20241128094311.042140333@infradead.org
2024-12-02objtool: Generic annotation infrastructurePeter Zijlstra
Avoid endless .discard.foo sections for each annotation, create a single .discard.annotate_insn section that takes an annotation type along with the instruction. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Josh Poimboeuf <jpoimboe@kernel.org> Link: https://lore.kernel.org/r/20241128094310.932794537@infradead.org
2024-12-02mm: introduce mmap_lock_speculate_{try_begin|retry}Suren Baghdasaryan
Add helper functions to speculatively perform operations without read-locking mmap_lock, expecting that mmap_lock will not be write-locked and mm is not modified from under us. Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Link: https://lkml.kernel.org/r/20241122174416.1367052-3-surenb@google.com
2024-12-02mm: convert mm_lock_seq to a proper seqcountSuren Baghdasaryan
Convert mm_lock_seq to be seqcount_t and change all mmap_write_lock variants to increment it, in-line with the usual seqcount usage pattern. This lets us check whether the mmap_lock is write-locked by checking mm_lock_seq.sequence counter (odd=locked, even=unlocked). This will be used when implementing mmap_lock speculation functions. As a result vm_lock_seq is also change to be unsigned to match the type of mm_lock_seq.sequence. Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Link: https://lkml.kernel.org/r/20241122174416.1367052-2-surenb@google.com
2024-12-02seqlock: add raw_seqcount_try_beginSuren Baghdasaryan
Add raw_seqcount_try_begin() to opens a read critical section of the given seqcount_t if the counter is even. This enables eliding the critical section entirely if the counter is odd, instead of doing the speculation knowing it will fail. Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Link: https://lkml.kernel.org/r/20241122174416.1367052-1-surenb@google.com
2024-12-02Merge tag 'v6.13-rc1' into perf/core, to refresh the branchIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2024-12-02pid: allow pid_max to be set per pid namespaceChristian Brauner
The pid_max sysctl is a global value. For a long time the default value has been 65535 and during the pidfd dicussions Linus proposed to bump pid_max by default (cf. [1]). Based on this discussion systemd started bumping pid_max to 2^22. So all new systems now run with a very high pid_max limit with some distros having also backported that change. The decision to bump pid_max is obviously correct. It just doesn't make a lot of sense nowadays to enforce such a low pid number. There's sufficient tooling to make selecting specific processes without typing really large pid numbers available. In any case, there are workloads that have expections about how large pid numbers they accept. Either for historical reasons or architectural reasons. One concreate example is the 32-bit version of Android's bionic libc which requires pid numbers less than 65536. There are workloads where it is run in a 32-bit container on a 64-bit kernel. If the host has a pid_max value greater than 65535 the libc will abort thread creation because of size assumptions of pthread_mutex_t. That's a fairly specific use-case however, in general specific workloads that are moved into containers running on a host with a new kernel and a new systemd can run into issues with large pid_max values. Obviously making assumptions about the size of the allocated pid is suboptimal but we have userspace that does it. Of course, giving containers the ability to restrict the number of processes in their respective pid namespace indepent of the global limit through pid_max is something desirable in itself and comes in handy in general. Independent of motivating use-cases the existence of pid namespaces makes this also a good semantical extension and there have been prior proposals pushing in a similar direction. The trick here is to minimize the risk of regressions which I think is doable. The fact that pid namespaces are hierarchical will help us here. What we mostly care about is that when the host sets a low pid_max limit, say (crazy number) 100 that no descendant pid namespace can allocate a higher pid number in its namespace. Since pid allocation is hierarchial this can be ensured by checking each pid allocation against the pid namespace's pid_max limit. This means if the allocation in the descendant pid namespace succeeds, the ancestor pid namespace can reject it. If the ancestor pid namespace has a higher limit than the descendant pid namespace the descendant pid namespace will reject the pid allocation. The ancestor pid namespace will obviously not care about this. All in all this means pid_max continues to enforce a system wide limit on the number of processes but allows pid namespaces sufficient leeway in handling workloads with assumptions about pid values and allows containers to restrict the number of processes in a pid namespace through the pid_max interface. [1]: https://lore.kernel.org/linux-api/CAHk-=wiZ40LVjnXSi9iHLE_-ZBsWFGCgdmNiYZUXn1-V5YBg2g@mail.gmail.com - rebased from 5.14-rc1 - a few fixes (missing ns_free_inum on error path, missing initialization, etc) - permission check changes in pid_table_root_permissions - unsigned int pid_max -> int pid_max (keep pid_max type as it was) - add READ_ONCE in alloc_pid() as suggested by Christian - rebased from 6.7 and take into account: * sysctl: treewide: drop unused argument ctl_table_root::set_ownership(table) * sysctl: treewide: constify ctl_table_header::ctl_table_arg * pidfd: add pidfs * tracing: Move saved_cmdline code into trace_sched_switch.c Signed-off-by: Alexander Mikhalitsyn <aleksandr.mikhalitsyn@canonical.com> Link: https://lore.kernel.org/r/20241122132459.135120-2-aleksandr.mikhalitsyn@canonical.com Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-12-02cred: fold get_new_cred_many() into get_cred_many()Christian Brauner
There's no need for this to be a separate helper. Link: https://lore.kernel.org/r/20241126-zaunpfahl-wovon-c3979b990a63@brauner Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-12-02cred: remove unused get_new_cred()Christian Brauner
This helper is not used anymore so remove it. Link: https://lore.kernel.org/r/20241125-work-cred-v2-29-68b9d38bb5b2@kernel.org Reviewed-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-12-02tree-wide: s/revert_creds_light()/revert_creds()/gChristian Brauner
Rename all calls to revert_creds_light() back to revert_creds(). Link: https://lore.kernel.org/r/20241125-work-cred-v2-6-68b9d38bb5b2@kernel.org Reviewed-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-12-02tree-wide: s/override_creds_light()/override_creds()/gChristian Brauner
Rename all calls to override_creds_light() back to overrid_creds(). Link: https://lore.kernel.org/r/20241125-work-cred-v2-5-68b9d38bb5b2@kernel.org Reviewed-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-12-02cred: remove old {override,revert}_creds() helpersChristian Brauner
They are now unused. Link: https://lore.kernel.org/r/20241125-work-cred-v2-4-68b9d38bb5b2@kernel.org Reviewed-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Christian Brauner <brauner@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-23 14:51:54 +0000