| Age | Commit message (Collapse) | Author |
|---|
|
Pull RISC-V SoC updates from Arnd Bergmann:
"Add support for StarFive JH7100 RISC-V SoC
This adds support for the StarFive JH7100, including the necessary
device drivers and DT files for the BeagleV Starlight prototype board,
with additional boards to be added later. This SoC promises to be the
first usable low-cost platform for RISC-V.
I've taken this through the SoC tree in the anticipation of adding a
few other Arm based SoCs as well, but those did not pass the review in
time, so it's only this one"
* tag 'newsoc-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
reset: starfive-jh7100: Fix 32bit compilation
RISC-V: Add BeagleV Starlight Beta device tree
RISC-V: Add initial StarFive JH7100 device tree
serial: 8250_dw: Add StarFive JH7100 quirk
dt-bindings: serial: snps-dw-apb-uart: Add JH7100 uarts
pinctrl: starfive: Add pinctrl driver for StarFive SoCs
dt-bindings: pinctrl: Add StarFive JH7100 bindings
dt-bindings: pinctrl: Add StarFive pinctrl definitions
reset: starfive-jh7100: Add StarFive JH7100 reset driver
dt-bindings: reset: Add Starfive JH7100 reset bindings
dt-bindings: reset: Add StarFive JH7100 reset definitions
clk: starfive: Add JH7100 clock generator driver
dt-bindings: clock: starfive: Add JH7100 bindings
dt-bindings: clock: starfive: Add JH7100 clock definitions
dt-bindings: interrupt-controller: Add StarFive JH7100 plic
dt-bindings: timer: Add StarFive JH7100 clint
RISC-V: Add StarFive SoC Kconfig option
|
|
Pull ARM SoC devicetree updates from Arnd Bergmann:
"As usual, this is the bulk of the updates for the SoC tree, adding
more devices to existing files, addressing issues from ever improving
automated checking, and fixing minor issues.
The most interesting bits as usual are the new platforms. All the
newly supported SoCs belong into existing families this time:
- Qualcomm gets support for two newly announced platforms, both of
which can now work in production environments: the SDX65 5G modem
that can run a minimal Linux on its Cortex-A7 core, and the
Snapdragon 8 Gen 1, their latest high-end phone SoC.
- Renesas adds support for R-Car S4-8, the most recent automotive
Server/Communication SoC.
- TI adds support for J721s2, a new automotive SoC in the K3 family.
- Mediatek MT7986a/b is a SoC used in Wifi routers, the latest
generation following their popular MT76xx series. Only basic
support is added for now.
- NXP i.MX8 ULP8 is a new low-power variant of the widespread i.MX8
series.
- TI SPEAr320s is a minor variant of the old SPEAr320 SoC that we
have supported for a long time.
New boards with the existing SoCs include
- Aspeed AST2500/AST2600 BMCs in TYAN, Facebook and Yadro servers
- AT91/SAMA5 based evaluation board
- NXP gains twenty new development and industrial boards for their
i.MX and Layerscape SoCs
- Intel IXP4xx now supports the final two machines in device tree
that were previously only supported in old style board files.
- Mediatek MT6589 is used in the Fairphone FP1 phone from 2013, while
MT8183 is used in the Acer Chromebook 314.
- Qualcomm gains support for the reference machines using the two new
SoCs, plus a number of Chromebook variants and phones based on the
Snapdragon 7c, 845 and 888 SoCs, including various Sony Xperia
devices and the Microsoft Surface Duo 2.
- ST STM32 now supports the Engicam i.Core STM32MP1 carrier board.
- Tegra now boots various older Android devices based on 32-bit chips
out of the box, including a number of ASUS Transformer tablets.
There is also a new Jetson AGX Orin developer kit.
- Apple support adds the missing device trees for all the remaining
M1 Macbook and iMac variants, though not yet the M1 Pro/Max
versions.
- Allwinner now supports another version of the Tanix TX6 set-top box
based on the H6 SoC.
- Broadcom gains support for the Netgear RAXE500 Wireless router
based on BCM4908"
* tag 'dt-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (574 commits)
Revert "ARM: dts: BCM5301X: define RTL8365MB switch on Asus RT-AC88U"
arm64: dts: qcom: sm6125: Avoid using missing SM6125_VDDCX
arm64: dts: qcom: sm8450-qrd: Enable USB nodes
arm64: dts: qcom: sm8450: Add usb nodes
ARM: dts: aspeed: add LCLK setting into LPC KCS nodes
dt-bindings: ipmi: bt-bmc: add 'clocks' as a required property
ARM: dts: aspeed: add LCLK setting into LPC IBT node
ARM: dts: aspeed: p10: Add TPM device
ARM: dts: aspeed: p10: Enable USB host ports
ARM: dts: aspeed: Add TYAN S8036 BMC machine
ARM: dts: aspeed: tyan-s7106: Add uart_routing and fix vuart config
ARM: dts: aspeed: Adding Facebook Bletchley BMC
ARM: dts: aspeed: g220a: Enable secondary flash
ARM: dts: Add openbmc-flash-layout-64-alt.dtsi
ARM: dts: aspeed: Add secure boot controller node
dt-bindings: aspeed: Add Secure Boot Controller bindings
ARM: dts: Remove "spidev" nodes
dt-bindings: pinctrl: samsung: Add pin drive definitions for Exynos850
dt-bindings: arm: samsung: Document E850-96 board binding
dt-bindings: Add vendor prefix for WinLink
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"There are cleanups and minor bugfixes across several SoC specific
drivers, for Qualcomm, Samsung, NXP i.MX, AT91, Tegra, Keystone,
Renesas, ZynqMP
Noteworthy new features are:
- The op-tee firmware driver gains support for asynchronous
notifications from secure-world firmware.
- Qualcomm platforms gain support for new SoC types in various
drivers: power domain, cache controller, RPM sleep, soc-info
- Samsung SoC drivers gain support for new SoCs in ChipID and PMU, as
well as a new USIv2 driver that handles various types of serial
communiction (uart, i2c, spi)
- Renesas adds support for R-Car S4-8 (R8A779F0) in multiple drivers,
as well as memory controller support for RZ/G2L (R9A07G044).
- Apple M1 gains support for the PMGR power management driver"
* tag 'drivers-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (94 commits)
soc: qcom: rpmh-rsc: Fix typo in a comment
soc: qcom: socinfo: Add SM6350 and SM7225
dt-bindings: arm: msm: Don't mark LLCC interrupt as required
dt-bindings: firmware: scm: Add SM6350 compatible
dt-bindings: arm: msm: Add LLCC for SM6350
soc: qcom: rpmhpd: Sort power-domain definitions and lists
soc: qcom: rpmhpd: Remove mx/cx relationship on sc7280
soc: qcom: rpmhpd: Rename rpmhpd struct names
soc: qcom: rpmhpd: sm8450: Add the missing .peer for sm8450_cx_ao
soc: qcom: socinfo: add SM8450 ID
soc: qcom: rpmhpd: Add SM8450 power domains
dt-bindings: power: rpmpd: Add SM8450 to rpmpd binding
soc: qcom: smem: Update max processor count
dt-bindings: arm: qcom: Document SM8450 SoC and boards
dt-bindings: firmware: scm: Add SM8450 compatible
dt-bindings: arm: cpus: Add kryo780 compatible
soc: qcom: rpmpd: Add support for sm6125
dt-bindings: qcom-rpmpd: Add sm6125 power domains
soc: qcom: aoss: constify static struct thermal_cooling_device_ops
PM: AVS: qcom-cpr: Use div64_ul instead of do_div
...
|
|
Pull ARM SoC updates from Arnd Bergmann:
"These are all minor bug fixes and cleanups to code in arch/arm and
arch/arm64 that is specific to one SoC, updating Kconfig symbols, the
MAINTAINERS file, and removing some dead code"
* tag 'soc-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: exynos: Enable Exynos Multi-Core Timer driver
ARM: ixp4xx: remove unused header file pata_ixp4xx_cf.h
ARM: ixp4xx: remove dead configs CPU_IXP43X and CPU_IXP46X
MAINTAINERS: Add Florian as BCM5301X and BCM53573 maintainer
ARM: samsung: Remove HAVE_S3C2410_I2C and use direct dependencies
ARM: imx: rename DEBUG_IMX21_IMX27_UART to DEBUG_IMX27_UART
ARM: imx: remove dead left-over from i.MX{27,31,35} removal
ARM: s3c: add one more "fallthrough" statement in Jive
ARM: s3c: include header for prototype of s3c2410_modify_misccr
ARM: shmobile: rcar-gen2: Add missing of_node_put()
|
|
Merge x86-specific ACPI updates, PMIC driver ACPI updates and a DPTF
driver update for 5.17-rc1:
- Rework the handling of device enumeration quirks in the x86-specific
code and add new quirks for known-broken platforms (Hans de Goede).
- Fix the handling of defective LPAT in the ACPI xpower PMIC driver
and clean up some definitions of PMIC data structures (Hans de
Goede).
- Fix outdated comment in the ACPI DPTF driver (Sumeet Pawnikar).
* acpi-x86:
ACPI / x86: Skip AC and battery devices on x86 Android tablets with broken DSDTs
ACPI / x86: Introduce an acpi_quirk_skip_acpi_ac_and_battery() helper
mmc: sdhci-acpi: Use the new soc_intel_is_byt() helper
mmc: sdhci-acpi: Remove special handling for GPD win/pocket devices
ACPI / x86: Add PWM2 on the Xiaomi Mi Pad 2 to the always_present list
ACPI / x86: Add not-present quirk for the PCI0.SDHB.BRC1 device on the GPD win
ACPI / x86: Allow specifying acpi_device_override_status() quirks by path
ACPI: Change acpi_device_always_present() into acpi_device_override_status()
ACPI / x86: Drop PWM2 device on Lenovo Yoga Book from always present table
* acpi-pmic:
ACPI: PMIC: xpower: Fix _TMP ACPI errors
ACPI: PMIC: allow drivers to provide a custom lpat_raw_to_temp() function
ACPI: PMIC: constify all struct intel_pmic_opregion_data declarations
* acpi-dptf:
ACPI: DPTF: Update device ID in a comment
|
|
Merge ACPI EC driver updates and ACPI processor driver updates for
5.17-rc1:
- Rework flushing of EC work while suspended to idle and clean up
the handling of events in the ACPI EC driver (Rafael Wysocki).
- Prohibit ec_sys module parameter write_support from being used
when the system is locked down (Hans de Goede).
- Make the ACPI processor thermal driver use cpufreq_cpu_get() to
check for presence of cpufreq policy (Manfred Spraul).
- Avoid unnecessary CPU cache flushing in the ACPI processor idle
driver (Kirill A. Shutemov).
- Replace kernel.h with the necessary inclusions in the ACPI
processor driver (Andy Shevchenko).
- Use swap() instead of open coding it in the ACPI processor idle
driver (Guo Zhengkui).
* acpi-ec:
ACPI: EC: Mark the ec_sys write_support param as module_param_hw()
ACPI: EC: Relocate acpi_ec_create_query() and drop acpi_ec_delete_query()
ACPI: EC: Make the event work state machine visible
ACPI: EC: Avoid queuing unnecessary work in acpi_ec_submit_event()
ACPI: EC: Rename three functions
ACPI: EC: Simplify locking in acpi_ec_event_handler()
ACPI: EC: Rearrange the loop in acpi_ec_event_handler()
ACPI: EC: Fold acpi_ec_check_event() into acpi_ec_event_handler()
ACPI: EC: Pass one argument to acpi_ec_query()
ACPI: EC: Call advance_transaction() from acpi_ec_dispatch_gpe()
ACPI: EC: Rework flushing of EC work while suspended to idle
* acpi-processor:
ACPI: processor: thermal: avoid cpufreq_get_policy()
ACPI: processor: idle: Only flush cache on entering C3
ACPI: processor idle: Use swap() instead of open coding it
ACPI: processor: Replace kernel.h with the necessary inclusions
|
|
Avoid potentially hazardous memory copying and the needless use of
"%pIS" -- in the kernel, an RPC service listener is always bound to
ANYADDR. Having the network namespace is helpful when recording
errors, though.
Fixes: a0469f46faab ("SUNRPC: Replace dprintk call sites in TCP state change callouts")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
While testing, I got an unexpected KASAN splat:
Jan 08 13:50:27 oracle-102.nfsv4.dev kernel: BUG: KASAN: stack-out-of-bounds in trace_event_raw_event_svc_xprt_create_err+0x190/0x210 [sunrpc]
Jan 08 13:50:27 oracle-102.nfsv4.dev kernel: Read of size 28 at addr ffffc9000008f728 by task mount.nfs/4628
The memcpy() in the TP_fast_assign section of this trace point
copies the size of the destination buffer in order that the buffer
won't be overrun.
In other similar trace points, the source buffer for this memcpy is
a "struct sockaddr_storage" so the actual length of the source
buffer is always long enough to prevent the memcpy from reading
uninitialized or unallocated memory.
However, for this trace point, the source buffer can be as small as
a "struct sockaddr_in". For AF_INET sockaddrs, the memcpy() reads
memory that follows the source buffer, which is not always valid
memory.
To avoid copying past the end of the passed-in sockaddr, make the
source address's length available to the memcpy(). It would be a
little nicer if the tracing infrastructure was more friendly about
storing socket addresses that are not AF_INET, but I could not find
a way to make printk("%pIS") work with a dynamic array.
Reported-by: KASAN
Fixes: 4b8f380e46e4 ("SUNRPC: Tracepoint to record errors in svc_xpo_create()")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Merge ACPI device enumeration updates, ACPI power management updates
and PCI host bridge ACPI driver updates for 5.17-rc1:
- Introduce acpi_fetch_acpi_dev() as a replacement for
acpi_bus_get_device() and use it in the ACPI subsystem (Rafael
Wysocki).
- Avoid using _CID for device enumaration if _HID is missing or
invalid (Rafael Wysocki).
- Rework quirk handling during ACPI device enumeration and add some
new quirks for known broken platforms (Hans de Goede).
- Avoid unnecessary or redundant CPU cache flushing during system
PM transitions (Kirill A. Shutemov).
- Add PM debug messages related to power resources (Rafael Wysocki).
- Fix kernel-doc comment in the PCI host bridge ACPI driver (Yang Li).
* acpi-scan:
serdev: Do not instantiate serdevs on boards with known bogus DSDT entries
i2c: acpi: Do not instantiate I2C-clients on boards with known bogus DSDT entries
ACPI / x86: Add acpi_quirk_skip_[i2c_client|serdev]_enumeration() helpers
ACPI: scan: Create platform device for BCM4752 and LNV4752 ACPI nodes
ACPI: Use acpi_fetch_acpi_dev() instead of acpi_bus_get_device()
ACPI: scan: Introduce acpi_fetch_acpi_dev()
ACPI: scan: Do not add device IDs from _CID if _HID is not valid
* acpi-pm:
ACPI: PM: Remove redundant cache flushing
ACPI: PM: Avoid CPU cache flush when entering S4
* acpi-power:
ACPI: PM: Emit debug messages when enabling/disabling wakeup power
* acpi-pci:
PCI/ACPI: Fix acpi_pci_osc_control_set() kernel-doc comment
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v5.17
A few more updates for v5.17, nothing hugely stand out in the few days
since the initial pull request was sent.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Pull irqchip updates from Marc Zyngier:
- Fix GICv3 redistributor table reservation with RT across kexec
- Fix GICv4.1 redistributor view of the VPE table across kexec
- Add support for extra interrupts on spear-shirq
- Make obtaining some interrupts optional for the Renesas drivers
- Various cleanups and bug fixes
Link: https://lore.kernel.org/lkml/20220108130807.4109738-1-maz@kernel.org
|
|
https://git.linaro.org/people/daniel.lezcano/linux into timers/core
Pull clocksource/events updates from Daniel Lezcano:
- Refactor resource allocation on the Exynos_mct driver without
functional changes (Marek Szyprowski)
- Add imx8ulp compatible string for NPX TPM driver (Jacky Bai)
- Fix comma introduced by error by replacing it by the initial
semicolon on the Exynos_mct (Will Deacon)
- Add OSTM driver support on Renesas. The reset line must be
deasserted before accessing the registers. This change depends on an
external change resulting in a shared immutable branch
'reset/of-get-optional-exclusive' from
git://git.pengutronix.de/pza/linux (Biju Das)
- Make the OSTM Kconfig option visible to user in order to let him
disable it when ARM architected timers is enabled (Biju Das)
- Tag two variables on iMX sysctr _ro_afterinit (Peng Fan)
- Set the cpumask to cpu_possible_mask in order to have full benefit
of the DYNIRQ flag on iMX sysctr (Peng Fan)
- Tag __maybe_unused a variable in the Pistachio timer driver in order
to fix a warning reported by the kernel test robot (Drew Fustini)
- Add MStar MSC313e timer support and the ssd20xd-based variant, as
well as the DT bindings (Romain Perier)
- Remove the incompatible compatible string for the rk3066 (Johan
Jonker)
- Fix dts_check warnings on the cadence ttc driver by adding the power
domain bindings (Michal Simek)
Link: https://lore.kernel.org/lkml/e093c706-c98d-29ee-0102-78b6d41c6164@linaro.org
|
|
Move NFS to using fscache DIO API instead of the old upstream I/O API as
that has been removed. This is a stopgap solution as the intention is that
at sometime in the future, the cache will move to using larger blocks and
won't be able to store individual pages in order to deal with the potential
for data corruption due to the backing filesystem being able insert/remove
bridging blocks of zeros into its extent list[1].
NFS then reads and writes cache pages synchronously and one page at a time.
The preferred change would be to use the netfs lib, but the new I/O API can
be used directly. It's just that as the cache now needs to track data for
itself, caching blocks may exceed page size...
This code is somewhat borrowed from my "fallback I/O" patchset[2].
Changes
=======
ver #3:
- Restore lost =n fallback for nfs_fscache_release_page()[2].
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Dave Wysochanski <dwysocha@redhat.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
cc: Trond Myklebust <trond.myklebust@hammerspace.com>
cc: Anna Schumaker <anna.schumaker@netapp.com>
cc: linux-nfs@vger.kernel.org
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/YO17ZNOcq+9PajfQ@mit.edu [1]
Link: https://lore.kernel.org/r/202112100957.2oEDT20W-lkp@intel.com/ [2]
Link: https://lore.kernel.org/r/163189108292.2509237.12615909591150927232.stgit@warthog.procyon.org.uk/ [2]
Link: https://lore.kernel.org/r/163906981318.143852.17220018647843475985.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/163967184451.1823006.6450645559828329590.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/164021577632.640689.11069627070150063812.stgit@warthog.procyon.org.uk/ # v4
|
|
Change the nfs filesystem to support fscache's indexing rewrite and
reenable caching in nfs.
The following changes have been made:
(1) The fscache_netfs struct is no more, and there's no need to register
the filesystem as a whole.
(2) The session cookie is now an fscache_volume cookie, allocated with
fscache_acquire_volume(). That takes three parameters: a string
representing the "volume" in the index, a string naming the cache to
use (or NULL) and a u64 that conveys coherency metadata for the
volume.
For nfs, I've made it render the volume name string as:
"nfs,<ver>,<family>,<address>,<port>,<fsidH>,<fsidL>*<,param>[,<uniq>]"
(3) The fscache_cookie_def is no more and needed information is passed
directly to fscache_acquire_cookie(). The cache no longer calls back
into the filesystem, but rather metadata changes are indicated at
other times.
fscache_acquire_cookie() is passed the same keying and coherency
information as before.
(4) fscache_enable/disable_cookie() have been removed.
Call fscache_use_cookie() and fscache_unuse_cookie() when a file is
opened or closed to prevent a cache file from being culled and to keep
resources to hand that are needed to do I/O.
If a file is opened for writing, we invalidate it with
FSCACHE_INVAL_DIO_WRITE in lieu of doing writeback to the cache,
thereby making it cease caching until all currently open files are
closed. This should give the same behaviour as the uptream code.
Making the cache store local modifications isn't straightforward for
NFS, so that's left for future patches.
(5) fscache_invalidate() now needs to be given uptodate auxiliary data and
a file size. It also takes a flag to indicate if this was due to a
DIO write.
(6) Call nfs_fscache_invalidate() with FSCACHE_INVAL_DIO_WRITE on a file
to which a DIO write is made.
(7) Call fscache_note_page_release() from nfs_release_page().
(8) Use a killable wait in nfs_vm_page_mkwrite() when waiting for
PG_fscache to be cleared.
(9) The functions to read and write data to/from the cache are stubbed out
pending a conversion to use netfslib.
Changes
=======
ver #3:
- Added missing =n fallback for nfs_fscache_release_file()[1][2].
ver #2:
- Use gfpflags_allow_blocking() rather than using flag directly.
- fscache_acquire_volume() now returns errors.
- Remove NFS_INO_FSCACHE as it's no longer used.
- Need to unuse a cookie on file-release, not inode-clear.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Co-developed-by: David Howells <dhowells@redhat.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Dave Wysochanski <dwysocha@redhat.com>
Acked-by: Jeff Layton <jlayton@kernel.org>
cc: Trond Myklebust <trond.myklebust@hammerspace.com>
cc: Anna Schumaker <anna.schumaker@netapp.com>
cc: linux-nfs@vger.kernel.org
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/202112100804.nksO8K4u-lkp@intel.com/ [1]
Link: https://lore.kernel.org/r/202112100957.2oEDT20W-lkp@intel.com/ [2]
Link: https://lore.kernel.org/r/163819668938.215744.14448852181937731615.stgit@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/163906979003.143852.2601189243864854724.stgit@warthog.procyon.org.uk/ # v2
Link: https://lore.kernel.org/r/163967182112.1823006.7791504655391213379.stgit@warthog.procyon.org.uk/ # v3
Link: https://lore.kernel.org/r/164021575950.640689.12069642327533368467.stgit@warthog.procyon.org.uk/ # v4
|
|
- new driver to support for LetSketch device (Hans de Goede)
|
|
- locking performance improvement for hidraw code (André Almeida)
|
|
- support for USI style pens (Tero Kristo, Mika Westerberg)
- quirk for devices that need inverted X/Y axes (Alistair Francis)
- small core code cleanups and deduplication (Benjamin Tissoires)
|
|
Move exfat superblock magic number from local definition to magic.h.
It is also needed by userspace programs that call fstatfs().
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
Merge in fixes directly in prep for the 5.17 merge window.
No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that all transports are split into modules it may happen that no
transports are registered when v9fs_get_default_trans() is called.
When that is the case try to load more transports from modules.
Link: https://lkml.kernel.org/r/20211103193823.111007-5-linux@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
[Dominique: constify v9fs_get_trans_by_name argument as per patch1v2]
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
|
|
This allows these transports only to be used when needed.
Link: https://lkml.kernel.org/r/20211103193823.111007-3-linux@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
[Dominique: Kconfig NET_9P_FD: -depends VIRTIO, +default NET_9P]
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
|
|
Replace kfree_skb() with kfree_skb_reason() in __udp4_lib_rcv.
New drop reason 'SKB_DROP_REASON_UDP_CSUM' is added for udp csum
error.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Replace kfree_skb() with kfree_skb_reason() in tcp_v4_rcv(). Following
drop reasons are added:
SKB_DROP_REASON_NO_SOCKET
SKB_DROP_REASON_PKT_TOO_SMALL
SKB_DROP_REASON_TCP_CSUM
SKB_DROP_REASON_TCP_FILTER
After this patch, 'kfree_skb' event will print message like this:
$ TASK-PID CPU# ||||| TIMESTAMP FUNCTION
$ | | | ||||| | |
<idle>-0 [000] ..s1. 36.113438: kfree_skb: skbaddr=(____ptrval____) protocol=2048 location=(____ptrval____) reason: NO_SOCKET
The reason of skb drop is printed too.
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Introduce the interface kfree_skb_reason(), which is able to pass
the reason why the skb is dropped to 'kfree_skb' tracepoint.
Add the 'reason' field to 'trace_kfree_skb', therefor user can get
more detail information about abnormal skb with 'drop_monitor' or
eBPF.
All drop reasons are defined in the enum 'skb_drop_reason', and
they will be print as string in 'kfree_skb' tracepoint in format
of 'reason: XXX'.
( Maybe the reasons should be defined in a uapi header file, so that
user space can use them? )
Signed-off-by: Menglong Dong <imagedong@tencent.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Netfilter conntrack maintains NAT flags per connection indicating
whether NAT was configured for the connection. Openvswitch maintains
NAT flags on the per packet flow key ct_state field, indicating
whether NAT was actually executed on the packet.
When a packet misses from tc to ovs the conntrack NAT flags are set.
However, NAT was not necessarily executed on the packet because the
connection's state might still be in NEW state. As such, openvswitch
wrongly assumes that NAT was executed and sets an incorrect flow key
NAT flags.
Fix this, by flagging to openvswitch which NAT was actually done in
act_ct via tc_skb_ext and tc_skb_cb to the openvswitch module, so
the packet flow key NAT flags will be correctly set.
Fixes: b57dc7c13ea9 ("net/sched: Introduce action ct")
Signed-off-by: Paul Blakey <paulb@nvidia.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20220106153804.26451-1-paulb@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for net-next. This
includes one patch to update ovs and act_ct to use nf_ct_put() instead
of nf_conntrack_put().
1) Add netns_tracker to nfnetlink_log and masquerade, from Eric Dumazet.
2) Remove redundant rcu read-size lock in nf_tables packet path.
3) Replace BUG() by WARN_ON_ONCE() in nft_payload.
4) Consolidate rule verdict tracing.
5) Replace WARN_ON() by WARN_ON_ONCE() in nf_tables core.
6) Make counter support built-in in nf_tables.
7) Add new field to conntrack object to identify locally generated
traffic, from Florian Westphal.
8) Prevent NAT from shadowing well-known ports, from Florian Westphal.
9) Merge nf_flow_table_{ipv4,ipv6} into nf_flow_table_inet, also from
Florian.
10) Remove redundant pointer in nft_pipapo AVX2 support, from Colin Ian King.
11) Replace opencoded max() in conntrack, from Jiapeng Chong.
12) Update conntrack to use refcount_t API, from Florian Westphal.
13) Move ip_ct_attach indirection into the nf_ct_hook structure.
14) Constify several pointer object in the netfilter codebase,
from Florian Westphal.
15) Tree-wide replacement of nf_conntrack_put() by nf_ct_put(), also
from Florian.
16) Fix egress splat due to incorrect rcu notation, from Florian.
17) Move stateful fields of connlimit, last, quota, numgen and limit
out of the expression data area.
18) Build a blob to represent the ruleset in nf_tables, this is a
requirement of the new register tracking infrastructure.
19) Add NFT_REG32_NUM to define the maximum number of 32-bit registers.
20) Add register tracking infrastructure to skip redundant
store-to-register operations, this includes support for payload,
meta and bitwise expresssions.
* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-next: (32 commits)
netfilter: nft_meta: cancel register tracking after meta update
netfilter: nft_payload: cancel register tracking after payload update
netfilter: nft_bitwise: track register operations
netfilter: nft_meta: track register operations
netfilter: nft_payload: track register operations
netfilter: nf_tables: add register tracking infrastructure
netfilter: nf_tables: add NFT_REG32_NUM
netfilter: nf_tables: add rule blob layout
netfilter: nft_limit: move stateful fields out of expression data
netfilter: nft_limit: rename stateful structure
netfilter: nft_numgen: move stateful fields out of expression data
netfilter: nft_quota: move stateful fields out of expression data
netfilter: nft_last: move stateful fields out of expression data
netfilter: nft_connlimit: move stateful fields out of expression data
netfilter: egress: avoid a lockdep splat
net: prefer nf_ct_put instead of nf_conntrack_put
netfilter: conntrack: avoid useless indirection during conntrack destruction
netfilter: make function op structures const
netfilter: core: move ip_ct_attach indirection to struct nf_ct_hook
netfilter: conntrack: convert to refcount_t api
...
====================
Link: https://lore.kernel.org/r/20220109231640.104123-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Check if the destination register already contains the data that this
bitwise expression performs. This allows to skip this redundant
operation.
If the destination contains a different bitwise operation, cancel the
register tracking information. If the destination contains no bitwise
operation, update the register tracking information.
Update the payload and meta expression to check if this bitwise
operation has been already performed on the register. Hence, both the
payload/meta and the bitwise expressions are reduced.
There is also a special case: If source register != destination register
and source register is not updated by a previous bitwise operation, then
transfer selector from the source register to the destination register.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This patch adds new infrastructure to skip redundant selector store
operations on the same register to achieve a performance boost from
the packet path.
This is particularly noticeable in pure linear rulesets but it also
helps in rulesets which are already heaving relying in maps to avoid
ruleset linear inspection.
The idea is to keep data of the most recurrent store operations on
register to reuse them with cmp and lookup expressions.
This infrastructure allows for dynamic ruleset updates since the ruleset
blob reduction happens from the kernel.
Userspace still needs to be updated to maximize register utilization to
cooperate to improve register data reuse / reduce number of store on
register operations.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Add a definition including the maximum number of 32-bits registers that
are used a scratchpad memory area to store data.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This patch adds a blob layout per chain to represent the ruleset in the
packet datapath.
size (unsigned long)
struct nft_rule_dp
struct nft_expr
...
struct nft_rule_dp
struct nft_expr
...
struct nft_rule_dp (is_last=1)
The new structure nft_rule_dp represents the rule in a more compact way
(smaller memory footprint) compared to the control-plane nft_rule
structure.
The ruleset blob is a read-only data structure. The first field contains
the blob size, then the rules containing expressions. There is a trailing
rule which is used by the tracing infrastructure which is equivalent to
the NULL rule marker in the previous representation. The blob size field
does not include the size of this trailing rule marker.
The ruleset blob is generated from the commit path.
This patch reuses the infrastructure available since 0cbc06b3faba
("netfilter: nf_tables: remove synchronize_rcu in commit phase") to
build the array of rules per chain.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
include/linux/netfilter_netdev.h:97 suspicious rcu_dereference_check() usage!
2 locks held by sd-resolve/1100:
0: ..(rcu_read_lock_bh){1:3}, at: ip_finish_output2
1: ..(rcu_read_lock_bh){1:3}, at: __dev_queue_xmit
__dev_queue_xmit+0 ..
The helper has two callers, one uses rcu_read_lock, the other
rcu_read_lock_bh(). Annotate the dereference to reflect this.
Fixes: 42df6e1d221dd ("netfilter: Introduce egress hook")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
nf_ct_put() results in a usesless indirection:
nf_ct_put -> nf_conntrack_put -> nf_conntrack_destroy -> rcu readlock +
indirect call of ct_hooks->destroy().
There are two _put helpers:
nf_ct_put and nf_conntrack_put. The latter is what should be used in
code that MUST NOT cause a linker dependency on the conntrack module
(e.g. calls from core network stack).
Everyone else should call nf_ct_put() instead.
A followup patch will convert a few nf_conntrack_put() calls to
nf_ct_put(), in particular from modules that already have a conntrack
dependency such as act_ct or even nf_conntrack itself.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
No functional changes, these structures should be const.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
ip_ct_attach predates struct nf_ct_hook, we can place it there and
remove the exported symbol.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Convert nf_conn reference counting from atomic_t to refcount_t based api.
refcount_t api provides more runtime sanity checks and will warn on
certain constructs, e.g. refcount_inc() on a zero reference count, which
usually indicates use-after-free.
For this reason template allocation is changed to init the refcount to
1, the subsequenct add operations are removed.
Likewise, init_conntrack() is changed to set the initial refcount to 1
instead refcount_inc().
This is safe because the new entry is not (yet) visible to other cpus.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Fix following coccicheck warning:
./include/net/netfilter/nf_conntrack.h:282:16-17: WARNING opportunity
for max().
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
- Add support for Foxconn QCA 0xe0d0
- Fix HCI init sequence on MacBook Air 8,1 and 8,2
- Fix Intel firmware loading on legacy ROM devices
* tag 'for-net-next-2022-01-07' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next:
Bluetooth: hci_sock: fix endian bug in hci_sock_setsockopt()
Bluetooth: L2CAP: uninitialized variables in l2cap_sock_setsockopt()
Bluetooth: btqca: sequential validation
Bluetooth: btusb: Add support for Foxconn QCA 0xe0d0
Bluetooth: btintel: Fix broken LED quirk for legacy ROM devices
Bluetooth: hci_event: Rework hci_inquiry_result_with_rssi_evt
Bluetooth: btbcm: disable read tx power for MacBook Air 8,1 and 8,2
Bluetooth: hci_qca: Fix NULL vs IS_ERR_OR_NULL check in qca_serdev_probe
Bluetooth: hci_bcm: Check for error irq
====================
Link: https://lore.kernel.org/r/20220107210942.3750887-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
My patch to rework oabi fcntl64() introduced a harmless
sparse warning when file locking is disabled:
arch/arm/kernel/sys_oabi-compat.c:251:51: sparse: sparse: incorrect type in argument 3 (different address spaces) @@ expected struct flock64 [noderef] __user *user @@ got struct flock64 * @@
arch/arm/kernel/sys_oabi-compat.c:251:51: sparse: expected struct flock64 [noderef] __user *user
arch/arm/kernel/sys_oabi-compat.c:251:51: sparse: got struct flock64 *
arch/arm/kernel/sys_oabi-compat.c:265:55: sparse: sparse: incorrect type in argument 4 (different address spaces) @@ expected struct flock64 [noderef] __user *user @@ got struct flock64 * @@
arch/arm/kernel/sys_oabi-compat.c:265:55: sparse: expected struct flock64 [noderef] __user *user
arch/arm/kernel/sys_oabi-compat.c:265:55: sparse: got struct flock64 *
When file locking is enabled, everything works correctly and the
right data gets passed, but the stub declarations in linux/fs.h
did not get modified when the calling conventions changed in an
earlier patch.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 7e2d8c29ecdd ("ARM: 9111/1: oabi-compat: rework fcntl64() emulation")
Fixes: a75d30c77207 ("fs/locks: pass kernel struct flock to fcntl_getlk/setlk")
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Move the 'inline' keyword to the front of 'void'.
Remove a warning found by clang(make W=1 LLVM=1)
./include/linux/blk-mq.h:259:1: warning: ‘inline’ is not at beginning of
declaration
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/20220107005228.103927-1-yang.lee@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If something went wrong during the TPM firmware upgrade, like power
failure or the firmware image file get corrupted, the TPM might end
up in Upgrade or Failure mode upon the next start. The state is
persistent between the TPM power cycle/restart.
According to TPM specification:
* If the TPM is in Upgrade mode, it will answer with TPM2_RC_UPGRADE
to all commands except TPM2_FieldUpgradeData(). It may also accept
other commands if it is able to complete them using the previously
installed firmware.
* If the TPM is in Failure mode, it will allow performing TPM
initialization but will not provide any crypto operations.
Will happily respond to Field Upgrade calls.
Change the behavior of the tpm2_auto_startup(), so it detects the active
running mode of the TPM by adding the following checks. If
tpm2_do_selftest() call returns TPM2_RC_UPGRADE, the TPM is in Upgrade
mode.
If the TPM is in Failure mode, it will successfully respond to both
tpm2_do_selftest() and tpm2_startup() calls. Although, will fail to
answer to tpm2_get_cc_attrs_tbl(). Use this fact to conclude that TPM is
in Failure mode.
If detected that the TPM is in the Upgrade or Failure mode, the function
sets TPM_CHIP_FLAG_FIRMWARE_UPGRADE_MODE flag.
The TPM_CHIP_FLAG_FIRMWARE_UPGRADE_MODE flag is used later during driver
initialization/deinitialization to disable functionality which makes no
sense or will fail in the current TPM state. Following functionality is
affected:
* Do not register TPM as a hwrng
* Do not register sysfs entries which provide information impossible to
obtain in limited mode
* Do not register resource managed character device
Signed-off-by: axelj <axelj@axis.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
There are non-root X.509 v3 certificates in use out there that contain
no Authority Key Identifier extension (RFC5280 section 4.2.1.1). For
trust verification purposes the kernel asymmetric key type keeps two
struct asymmetric_key_id instances that the key can be looked up by,
and another two to look up the key's issuer. The x509 public key type
and the PKCS7 type generate them from the SKID and AKID extensions in
the certificate. In effect current code has no way to look up the
issuer certificate for verification without the AKID.
To remedy this, add a third asymmetric_key_id blob to the arrays in
both asymmetric_key_id's (for certficate subject) and in the
public_keys_signature's auth_ids (for issuer lookup), using just raw
subject and issuer DNs from the certificate. Adapt
asymmetric_key_ids() and its callers to use the third ID for lookups
when none of the other two are available. Attempt to keep the logic
intact when they are, to minimise behaviour changes. Adapt the
restrict functions' NULL-checks to include that ID too. Do not modify
the lookup logic in pkcs7_verify.c, the AKID extensions are still
required there.
Internally use a new "dn:" prefix to the search specifier string
generated for the key lookup in find_asymmetric_key(). This tells
asymmetric_key_match_preparse to only match the data against the raw
DN in the third ID and shouldn't conflict with search specifiers
already in use.
In effect implement what (2) in the struct asymmetric_key_id comment
(include/keys/asymmetric-type.h) is probably talking about already, so
do not modify that comment. It is also how "openssl verify" looks up
issuer certificates without the AKID available. Lookups by the raw
DN are unambiguous only provided that the CAs respect the condition in
RFC5280 4.2.1.1 that the AKID may only be omitted if the CA uses
a single signing key.
The following is an example of two things that this change enables.
A self-signed ceritficate is generated following the example from
https://letsencrypt.org/docs/certificates-for-localhost/, and can be
looked up by an identifier and verified against itself by linking to a
restricted keyring -- both things not possible before due to the missing
AKID extension:
$ openssl req -x509 -out localhost.crt -outform DER -keyout localhost.key \
-newkey rsa:2048 -nodes -sha256 \
-subj '/CN=localhost' -extensions EXT -config <( \
echo -e "[dn]\nCN=localhost\n[req]\ndistinguished_name = dn\n[EXT]\n" \
"subjectAltName=DNS:localhost\nkeyUsage=digitalSignature\n" \
"extendedKeyUsage=serverAuth")
$ keyring=`keyctl newring test @u`
$ trusted=`keyctl padd asymmetric trusted $keyring < localhost.crt`; \
echo $trusted
39726322
$ keyctl search $keyring asymmetric dn:3112301006035504030c096c6f63616c686f7374
39726322
$ keyctl restrict_keyring $keyring asymmetric key_or_keyring:$trusted
$ keyctl padd asymmetric verified $keyring < localhost.crt
Signed-off-by: Andrew Zaborowski <andrew.zaborowski@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Acked-by: Jarkko Sakkinen <jarkko@kernel.org>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
NFSv4.1 supports an optional lock notification feature which notifies
the client when a lock comes available. (Normally NFSv4 clients just
poll for locks if necessary.) To make that work, we need to request a
blocking lock from the filesystem.
We turned that off for NFS in commit f657f8eef3ff ("nfs: don't atempt
blocking locks on nfs reexports") [sic] because it actually blocks the
nfsd thread while waiting for the lock.
Thanks to Vasily Averin for pointing out that NFS isn't the only
filesystem with that problem.
Any filesystem that leaves ->lock NULL will use posix_lock_file(), which
does the right thing. Simplest is just to assume that any filesystem
that defines its own ->lock is not safe to request a blocking lock from.
So, this patch mostly reverts commit f657f8eef3ff ("nfs: don't atempt
blocking locks on nfs reexports") [sic] and commit b840be2f00c0 ("lockd:
don't attempt blocking locks on nfs reexports"), and instead uses a
check of ->lock (Vasily's suggestion) to decide whether to support
blocking lock notifications on a given filesystem. Also add a little
documentation.
Perhaps someday we could add back an export flag later to allow
filesystems with "good" ->lock methods to support blocking lock
notifications.
Reported-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
[ cel: Description rewritten to address checkpatch nits ]
[ cel: Fixed warning when SUNRPC debugging is disabled ]
[ cel: Fixed NULL check ]
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Vasily Averin <vvs@virtuozzo.com>
|
|
Link: https://lkml.kernel.org/r/20220103213312.9144-7-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
All profile_handoff_task does is notify the task_free_notifier chain.
The helpers task_handoff_register and task_handoff_unregister are used
to add and delete entries from that chain and are never called.
So remove the dead code and make it much easier to read and reason
about __put_task_struct.
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lkml.kernel.org/r/87fspyw6m0.fsf@email.froward.int.ebiederm.org
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
When I say remove I mean remove. All profile_task_exit and
profile_munmap do is call a blocking notifier chain. The helpers
profile_task_register and profile_task_unregister are not called
anywhere in the tree. Which means this is all dead code.
So remove the dead code and make it easier to read do_exit.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lkml.kernel.org/r/20220103213312.9144-1-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
This helper is misleading. It tests for an ongoing exec as well as
the process having received a fatal signal.
Sometimes it is appropriate to treat an on-going exec differently than
a process that is shutting down due to a fatal signal. In particular
taking the fast path out of exit_signals instead of retargeting
signals is not appropriate during exec, and not changing the the exit
code in do_group_exit during exec.
Removing the helper makes it more obvious what is going on as both
cases must be coded for explicitly.
While removing the helper fix the two cases where I have observed
using signal_group_exit resulted in the wrong result.
In exit_signals only test for SIGNAL_GROUP_EXIT so that signals are
retargetted during an exec.
In do_group_exit use 0 as the exit code during an exec as de_thread
does not set group_exit_code. As best as I can determine
group_exit_code has been is set to 0 most of the time during
de_thread. During a thread group stop group_exit_code is set to the
stop signal and when the thread group receives SIGCONT group_exit_code
is reset to 0.
Link: https://lkml.kernel.org/r/20211213225350.27481-8-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
The only remaining user of group_exit_task is exec. Rename the field
so that it is clear which part of the code uses it.
Update the comment above the definition of group_exec_task to document
how it is currently used.
Link: https://lkml.kernel.org/r/20211213225350.27481-7-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
After the previous cleanups "signal->core_state" is set whenever
SIGNAL_GROUP_COREDUMP is set and "signal->core_state" is tested
whenver the code wants to know if a coredump is in progress. The
remaining tests of SIGNAL_GROUP_COREDUMP also test to see if
SIGNAL_GROUP_EXIT is set. Similarly the only place that sets
SIGNAL_GROUP_COREDUMP also sets SIGNAL_GROUP_EXIT.
Which makes SIGNAL_GROUP_COREDUMP unecessary and redundant. So stop
setting SIGNAL_GROUP_COREDUMP, stop testing SIGNAL_GROUP_COREDUMP, and
remove it's definition.
With the setting of SIGNAL_GROUP_COREDUMP gone, coredump_finish no
longer needs to clear SIGNAL_GROUP_COREDUMP out of signal->flags
by setting SIGNAL_GROUP_EXIT.
Link: https://lkml.kernel.org/r/20211213225350.27481-5-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
|
When CONFIG_SYSFS is not enabled provide stubs for the helper functions
to not break their callers.
Fixes: 539b9c94ac83 ("power: supply: add helpers for charge_behaviour sysfs")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20220108153158.189489-1-linux@weissschuh.net
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
The point of using set_child_tid to hold the kthread pointer was that
it already did what is necessary. There are now restrictions on when
set_child_tid can be initialized and when set_child_tid can be used in
schedule_tail. Which indicates that continuing to use set_child_tid
to hold the kthread pointer is a bad idea.
Instead of continuing to use the set_child_tid field of task_struct
generalize the pf_io_worker field of task_struct and use it to hold
the kthread pointer.
Rename pf_io_worker (which is a void * pointer) to worker_private so
it can be used to store kthreads struct kthread pointer. Update the
kthread code to store the kthread pointer in the worker_private field.
Remove the places where set_child_tid had to be dealt with carefully
because kthreads also used it.
Link: https://lkml.kernel.org/r/CAHk-=wgtFAA9SbVYg0gR1tqPMC17-NYcs0GQkaYg1bGhh1uJQQ@mail.gmail.com
Link: https://lkml.kernel.org/r/87a6grvqy8.fsf_-_@email.froward.int.ebiederm.org
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
|
