| Age | Commit message (Collapse) | Author |
|---|
|
SFP standards are now available from the SNIA (Storage Networking
Industry Association) website.
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"As a usual pattern, we've got relatively large updates at rc5:
- A fix for races in ALSA control user elements
- ASoC DAPM regression due to component refactoring
- A fix in error handling of ASoC iteration macro
- ASoC Intel SST Skylake kconfig fix; a new Kconfig will appear as a
consequence, but in the end it's a good cleanup
- HD-audio and USB-audio quirks as always
- Assort of ASoC driver fixes (pcm186x, Intel cht, rockchip, pcm3060,
rsnd, omap, wm_adsp, qcom, sunxi, stm32)"
* tag 'sound-4.20-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (34 commits)
ALSA: usb-audio: Add vendor and product name for Dell WD19 Dock
ALSA: hda/realtek - Support ALC300
ALSA: hda/realtek - Add auto-mute quirk for HP Spectre x360 laptop
ALSA: hda/realtek - fix the pop noise on headphone for lenovo laptops
ALSA: control: Fix race between adding and removing a user element
ALSA: sparc: Fix invalid snd_free_pages() at error path
ALSA: wss: Fix invalid snd_free_pages() at error path
ALSA: hda/realtek - fix headset mic detection for MSI MS-B171
ALSA: hda: Add ASRock N68C-S UCC the power_save blacklist
ALSA: ac97: Fix incorrect bit shift at AC97-SPSA control write
ASoC: omap-dmic: Add pm_qos handling to avoid overruns with CPU_IDLE
ASoC: omap-mcpdm: Add pm_qos handling to avoid under/overruns with CPU_IDLE
ASoC: omap-mcbsp: Fix latency value calculation for pm_qos
ASoC: acpi: fix: continue searching when machine is ignored
ASoC: Intel: Skylake: fix Kconfigs, make HDaudio codec optional
MAINTAINERS: add ASoC maintainers for sound dt-bindings
ASoC: pcm186x: Fix device reset-registers trigger value
ASoC: dapm: Recalculate audio map forcely when card instantiated
ASoC: omap-abe-twl6040: Fix missing audio card caused by deferred probing
ASoC: pcm3060: Rename output widgets
...
|
|
This reverts commit b3cf8528bb21febb650a7ecbf080d0647be40b9f.
That commit unintentionally broke Xen balloon memory hotplug with
"hotplug_unpopulated" set to 1. As long as "System RAM" resource
got assigned under a new "Unusable memory" resource in IO/Mem tree
any attempt to online this memory would fail due to general kernel
restrictions on having "System RAM" resources as 1st level only.
The original issue that commit has tried to workaround fa564ad96366
("x86/PCI: Enable a 64bit BAR on AMD Family 15h (Models 00-1f, 30-3f,
60-7f)") also got amended by the following 03a551734 ("x86/PCI: Move
and shrink AMD 64-bit window to avoid conflict") which made the
original fix to Xen ballooning unnecessary.
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
As addressed in alsa-lib (commit b420056604f0), we need to fix the
case where the evaluation of PCM interval "(x x+1]" leading to
-EINVAL. After applying rules, such an interval may be translated as
"(x x+1)".
Fixes: ff2d6acdf6f1 ("ALSA: pcm: Fix snd_interval_refine first/last with open min/max")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Pull networking fixes from David Miller:
1) ARM64 JIT fixes for subprog handling from Daniel Borkmann.
2) Various sparc64 JIT bug fixes (fused branch convergance, frame
pointer usage detection logic, PSEODU call argument handling).
3) Fix to use BH locking in nf_conncount, from Taehee Yoo.
4) Fix race of TX skb freeing in ipheth driver, from Bernd Eckstein.
5) Handle return value of TX NAPI completion properly in lan743x
driver, from Bryan Whitehead.
6) MAC filter deletion in i40e driver clears wrong state bit, from
Lihong Yang.
7) Fix use after free in rionet driver, from Pan Bian.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (53 commits)
s390/qeth: fix length check in SNMP processing
net: hisilicon: remove unexpected free_netdev
rapidio/rionet: do not free skb before reading its length
i40e: fix kerneldoc for xsk methods
ixgbe: recognize 1000BaseLX SFP modules as 1Gbps
i40e: Fix deletion of MAC filters
igb: fix uninitialized variables
netfilter: nf_tables: deactivate expressions in rule replecement routine
lan743x: Enable driver to work with LAN7431
tipc: fix lockdep warning during node delete
lan743x: fix return value for lan743x_tx_napi_poll
net: via: via-velocity: fix spelling mistake "alignement" -> "alignment"
qed: fix spelling mistake "attnetion" -> "attention"
net: thunderx: fix NULL pointer dereference in nic_remove
sctp: increase sk_wmem_alloc when head->truesize is increased
firestream: fix spelling mistake: "Inititing" -> "Initializing"
net: phy: add workaround for issue where PHY driver doesn't bind to the device
usbnet: ipheth: fix potential recvmsg bug and recvmsg bug 2
sparc: Adjust bpf JIT prologue for PSEUDO calls.
bpf, doc: add entries of who looks over which jits
...
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Disable BH while holding list spinlock in nf_conncount, from
Taehee Yoo.
2) List corruption in nf_conncount, also from Taehee.
3) Fix race that results in leaving around an empty list node in
nf_conncount, from Taehee Yoo.
4) Proper chain handling for inactive chains from the commit path,
from Florian Westphal. This includes a selftest for this.
5) Do duplicate rule handles when replacing rules, also from Florian.
6) Remove net_exit path in xt_RATEEST that results in splat, from Taehee.
7) Possible use-after-free in nft_compat when releasing extensions.
From Florian.
8) Memory leak in xt_hashlimit, from Taehee.
9) Call ip_vs_dst_notifier after ipv6_dev_notf, from Xin Long.
10) Fix cttimeout with udplite and gre, from Florian.
11) Preserve oif for IPv6 link-local generated traffic from mangle
table, from Alin Nastac.
12) Missing error handling in masquerade notifiers, from Taehee Yoo.
13) Use mutex to protect registration/unregistration of masquerade
extensions in order to prevent a race, from Taehee.
14) Incorrect condition check in tree_nodes_free(), also from Taehee.
15) Fix chain counter leak in rule replacement path, from Taehee.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The code in fscache_retrieval_complete is using atomic_sub followed by an
atomic_read:
atomic_sub(n_pages, &op->n_pages);
if (atomic_read(&op->n_pages) <= 0)
fscache_op_complete(&op->op, true);
This causes two threads doing a decrement of n_pages to race with each
other seeing the op->refcount 0 at same time - and they end up calling
fscache_op_complete() in both the threads leading to an assertion failure.
Fix this by using atomic_sub_return_relaxed() instead of two calls. Note
that I'm using 'relaxed' rather than, say, 'release' as there aren't
multiple variables that appear to need ordering across the release.
The oops looks something like:
FS-Cache: Assertion failed
FS-Cache: 0 > 0 is false
...
kernel BUG at /usr/src/linux-4.4.0/fs/fscache/operation.c:449!
...
Workqueue: fscache_operation fscache_op_work_func [fscache]
...
RIP: 0010:[<ffffffffc037eacd>] fscache_op_complete+0x10d/0x180 [fscache]
...
Call Trace:
[<ffffffffc1464cf9>] cachefiles_read_copier+0x3a9/0x410 [cachefiles]
[<ffffffffc037e272>] fscache_op_work_func+0x22/0x50 [fscache]
[<ffffffff81096da0>] process_one_work+0x150/0x3f0
[<ffffffff8109751a>] worker_thread+0x11a/0x470
[<ffffffff81808e59>] ? __schedule+0x359/0x980
[<ffffffff81097400>] ? rescuer_thread+0x310/0x310
[<ffffffff8109cdd6>] kthread+0xd6/0xf0
[<ffffffff8109cd00>] ? kthread_park+0x60/0x60
[<ffffffff8180d0cf>] ret_from_fork+0x3f/0x70
[<ffffffff8109cd00>] ? kthread_park+0x60/0x60
This seen this in 4.4.x kernels and the same bug affects fscache in latest
upstreams kernels.
Fixes: 1bb4b7f98f36 ("FS-Cache: The retrieval remaining-pages counter needs to be atomic_t")
Signed-off-by: Kiran Kumar Modukuri <kiran.modukuri@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
|
|
Add the PR_SPEC_INDIRECT_BRANCH option for the PR_GET_SPECULATION_CTRL and
PR_SET_SPECULATION_CTRL prctls to allow fine grained per task control of
indirect branch speculation via STIBP and IBPB.
Invocations:
Check indirect branch speculation status with
- prctl(PR_GET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, 0, 0, 0);
Enable indirect branch speculation with
- prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, PR_SPEC_ENABLE, 0, 0);
Disable indirect branch speculation with
- prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, PR_SPEC_DISABLE, 0, 0);
Force disable indirect branch speculation with
- prctl(PR_SET_SPECULATION_CTRL, PR_SPEC_INDIRECT_BRANCH, PR_SPEC_FORCE_DISABLE, 0, 0);
See Documentation/userspace-api/spec_ctrl.rst.
Signed-off-by: Tim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Casey Schaufler <casey.schaufler@intel.com>
Cc: Asit Mallick <asit.k.mallick@intel.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Jon Masters <jcm@redhat.com>
Cc: Waiman Long <longman9394@gmail.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Dave Stewart <david.c.stewart@intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20181125185005.866780996@linutronix.de
|
|
The IBPB control code in x86 removed the usage. Remove the functionality
which was introduced for this.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Casey Schaufler <casey.schaufler@intel.com>
Cc: Asit Mallick <asit.k.mallick@intel.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Jon Masters <jcm@redhat.com>
Cc: Waiman Long <longman9394@gmail.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Dave Stewart <david.c.stewart@intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20181125185005.559149393@linutronix.de
|
|
arch_smt_update() is only called when the sysfs SMT control knob is
changed. This means that when SMT is enabled in the sysfs control knob the
system is considered to have SMT active even if all siblings are offline.
To allow finegrained control of the speculation mitigations, the actual SMT
state is more interesting than the fact that siblings could be enabled.
Rework the code, so arch_smt_update() is invoked from each individual CPU
hotplug function, and simplify the update function while at it.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Casey Schaufler <casey.schaufler@intel.com>
Cc: Asit Mallick <asit.k.mallick@intel.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Jon Masters <jcm@redhat.com>
Cc: Waiman Long <longman9394@gmail.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Dave Stewart <david.c.stewart@intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20181125185004.521974984@linutronix.de
|
|
Make the scheduler's 'sched_smt_present' static key globaly available, so
it can be used in the x86 speculation control code.
Provide a query function and a stub for the CONFIG_SMP=n case.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Casey Schaufler <casey.schaufler@intel.com>
Cc: Asit Mallick <asit.k.mallick@intel.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Jon Masters <jcm@redhat.com>
Cc: Waiman Long <longman9394@gmail.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Dave Stewart <david.c.stewart@intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20181125185004.430168326@linutronix.de
|
|
commit 3f5fe9fef5b2 ("sched/debug: Fix task state recording/printout")
tried to fix the problem introduced by a previous commit efb40f588b43
("sched/tracing: Fix trace_sched_switch task-state printing"). However
the prev_state output in sched_switch is still broken.
task_state_index() uses fls() which considers the LSB as 1. Left
shifting 1 by this value gives an incorrect mapping to the task state.
Fix this by decrementing the value returned by __get_task_state()
before shifting.
Link: http://lkml.kernel.org/r/1540882473-1103-1-git-send-email-pkondeti@codeaurora.org
Cc: stable@vger.kernel.org
Fixes: 3f5fe9fef5b2 ("sched/debug: Fix task state recording/printout")
Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Currently, the depth of the ret_stack is determined by curr_ret_stack index.
The issue is that there's a race between setting of the curr_ret_stack and
calling of the callback attached to the return of the function.
Commit 03274a3ffb44 ("tracing/fgraph: Adjust fgraph depth before calling
trace return callback") moved the calling of the callback to after the
setting of the curr_ret_stack, even stating that it was safe to do so, when
in fact, it was the reason there was a barrier() there (yes, I should have
commented that barrier()).
Not only does the curr_ret_stack keep track of the current call graph depth,
it also keeps the ret_stack content from being overwritten by new data.
The function profiler, uses the "subtime" variable of ret_stack structure
and by moving the curr_ret_stack, it allows for interrupts to use the same
structure it was using, corrupting the data, and breaking the profiler.
To fix this, there needs to be two variables to handle the call stack depth
and the pointer to where the ret_stack is being used, as they need to change
at two different locations.
Cc: stable@kernel.org
Fixes: 03274a3ffb449 ("tracing/fgraph: Adjust fgraph depth before calling trace return callback")
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
As all architectures now call function_graph_enter() to do the entry work,
no architecture should ever call ftrace_push_return_trace(). Make it static.
This is needed to prepare for a fix of a design bug on how the curr_ret_stack
is used.
Cc: stable@kernel.org
Fixes: 03274a3ffb449 ("tracing/fgraph: Adjust fgraph depth before calling trace return callback")
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v4.20
Lots of fixes here, the majority of which are driver specific but
there's a couple of core things and one notable driver specific one:
- A core fix for a DAPM regression introduced during the component
refactoring, we'd lost the code that forced a reevaluation of the
DAPM graph after probe (which we suppress during init to save lots
of recalcuation) and have now restored it.
- A core fix for error handling using the newly added
for_each_rtd_codec_dai_rollback() macro.
- A fix for the names of widgets in the newly introduced pcm3060
driver, merged as a fix so we don't have a release with legacy names.
|
|
Make fetching of the BPF call address from ppc64 JIT generic. ppc64
was using a slightly different variant rather than through the insns'
imm field encoding as the target address would not fit into that space.
Therefore, the target subprog number was encoded into the insns' offset
and fetched through fp->aux->func[off]->bpf_func instead. Given there
are other JITs with this issue and the mechanism of fetching the address
is JIT-generic, move it into the core as a helper instead. On the JIT
side, we get information on whether the retrieved address is a fixed
one, that is, not changing through JIT passes, or a dynamic one. For
the former, JITs can optimize their imm emission because this doesn't
change jump offsets throughout JIT process.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Sandipan Das <sandipan@linux.ibm.com>
Tested-by: Sandipan Das <sandipan@linux.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
register_{netdevice/inetaddr/inet6addr}_notifier may return an error
value, this patch adds the code to handle these error paths.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Currently all the architectures do basically the same thing in preparing the
function graph tracer on entry to a function. This code can be pulled into a
generic location and then this will allow the function graph tracer to be
fixed, as well as extended.
Create a new function graph helper function_graph_enter() that will call the
hook function (ftrace_graph_entry) and the shadow stack operation
(ftrace_push_return_trace), and remove the need of the architecture code to
manage the shadow stack.
This is needed to prepare for a fix of a design bug on how the curr_ret_stack
is used.
Cc: stable@kernel.org
Fixes: 03274a3ffb449 ("tracing/fgraph: Adjust fgraph depth before calling trace return callback")
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
Commit 587f7a694f01 ("gpio: davinci: Use dev name for label and
automatic base selection") broke the network support in legacy boot
mode for da850-evm since we can no longer request the MDIO clock GPIO.
Other boards may be broken too, which I haven't tested.
The problem is in the fact that most board files still use the legacy
GPIO API where lines are requested by numbers rather than descriptors.
While this should be fixed eventually, in order to unbreak the board
for now - provide a way to manually specify the GPIO base in platform
data.
Fixes: 587f7a694f01 ("gpio: davinci: Use dev name for label and automatic base selection")
Cc: stable@vger.kernel.org
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
|
|
syzbot was able to trigger the WARN in cttimeout_default_get() by
passing UDPLITE as l4protocol. Alias UDPLITE to UDP, both use
same timeout values.
Furthermore, also fetch GRE timeouts. GRE is a bit more complicated,
as it still can be a module and its netns_proto_gre struct layout isn't
visible outside of the gre module. Can't move timeouts around, it
appears conntrack sysctl unregister assumes net_generic() returns
nf_proto_net, so we get crash. Expose layout of netns_proto_gre instead.
A followup nf-next patch could make gre tracker be built-in as well
if needed, its not that large.
Last, make the WARN() mention the missing protocol value in case
anything else is missing.
Reported-by: syzbot+2fae8fa157dd92618cae@syzkaller.appspotmail.com
Fixes: 8866df9264a3 ("netfilter: nfnetlink_cttimeout: pass default timeout policy to obj_to_nlattr")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Pull dma-mapping fixes from Christoph Hellwig:
"Two dma-direct / swiotlb regressions fixes:
- zero is a valid physical address on some arm boards, we can't use
it as the error value
- don't try to cache flush the error return value (no matter what it
is)"
* tag 'dma-mapping-4.20-3' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: Skip cache maintenance on map error
dma-direct: Make DIRECT_MAPPING_ERROR viable for SWIOTLB
|
|
Pull XArray updates from Matthew Wilcox:
"We found some bugs in the DAX conversion to XArray (and one bug which
predated the XArray conversion). There were a couple of bugs in some
of the higher-level functions, which aren't actually being called in
today's kernel, but surfaced as a result of converting existing radix
tree & IDR users over to the XArray.
Some of the other changes to how the higher-level APIs work were also
motivated by converting various users; again, they're not in use in
today's kernel, so changing them has a low probability of introducing
a bug.
Dan can still trigger a bug in the DAX code with hot-offline/online,
and we're working on tracking that down"
* tag 'xarray-4.20-rc4' of git://git.infradead.org/users/willy/linux-dax:
XArray tests: Add missing locking
dax: Avoid losing wakeup in dax_lock_mapping_entry
dax: Fix huge page faults
dax: Fix dax_unlock_mapping_entry for PMD pages
dax: Reinstate RCU protection of inode
dax: Make sure the unlocking entry isn't locked
dax: Remove optimisation from dax_lock_mapping_entry
XArray tests: Correct some 64-bit assumptions
XArray: Correct xa_store_range
XArray: Fix Documentation
XArray: Handle NULL pointers differently for allocation
XArray: Unify xa_store and __xa_store
XArray: Add xa_store_bh() and xa_store_irq()
XArray: Turn xa_erase into an exported function
XArray: Unify xa_cmpxchg and __xa_cmpxchg
XArray: Regularise xa_reserve
nilfs2: Use xa_erase_irq
XArray: Export __xa_foo to non-GPL modules
XArray: Fix xa_for_each with a single element at 0
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- revert of the high-resolution scrolling feature, as it breaks certain
hardware due to incompatibilities between Logitech and Microsoft
worlds. Peter Hutterer is working on a fixed implementation. Until
that is finished, revert by Benjamin Tissoires.
- revert of incorrect strncpy->strlcpy conversion in uhid, from David
Herrmann
- fix for buggy sendfile() implementation on uhid device node, from
Eric Biggers
- a few assorted device-ID specific quirks
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
Revert "Input: Add the `REL_WHEEL_HI_RES` event code"
Revert "HID: input: Create a utility class for counting scroll events"
Revert "HID: logitech: Add function to enable HID++ 1.0 "scrolling acceleration""
Revert "HID: logitech: Enable high-resolution scrolling on Logitech mice"
Revert "HID: logitech: Use LDJ_DEVICE macro for existing Logitech mice"
Revert "HID: logitech: fix a used uninitialized GCC warning"
Revert "HID: input: simplify/fix high-res scroll event handling"
HID: Add quirk for Primax PIXART OEM mice
HID: i2c-hid: Disable runtime PM for LG touchscreen
HID: multitouch: Add pointstick support for Cirque Touchpad
HID: steam: remove input device when a hid client is running.
Revert "HID: uhid: use strlcpy() instead of strncpy()"
HID: uhid: forbid UHID_CREATE under KERNEL_DS or elevated privileges
HID: input: Ignore battery reported by Symbol DS4308
HID: Add quirk for Microsoft PIXART OEM mouse
|
|
Pull networking fixes from David Miller:
1) Need to take mutex in ath9k_add_interface(), from Dan Carpenter.
2) Fix mt76 build without CONFIG_LEDS_CLASS, from Arnd Bergmann.
3) Fix socket wmem accounting in SCTP, from Xin Long.
4) Fix failed resume crash in ena driver, from Arthur Kiyanovski.
5) qed driver passes bytes instead of bits into second arg of
bitmap_weight(). From Denis Bolotin.
6) Fix reset deadlock in ibmvnic, from Juliet Kim.
7) skb_scrube_packet() needs to scrub the fwd marks too, from Petr
Machata.
8) Make sure older TCP stacks see enough dup ACKs, and avoid doing SACK
compression during this period, from Eric Dumazet.
9) Add atomicity to SMC protocol cursor handling, from Ursula Braun.
10) Don't leave dangling error pointer if bpf_prog_add() fails in
thunderx driver, from Lorenzo Bianconi. Also, when we unmap TSO
headers, set sq->tso_hdrs to NULL.
11) Fix race condition over state variables in act_police, from Davide
Caratti.
12) Disable guest csum in the presence of XDP in virtio_net, from Jason
Wang.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (64 commits)
net: gemini: Fix copy/paste error
net: phy: mscc: fix deadlock in vsc85xx_default_config
dt-bindings: dsa: Fix typo in "probed"
net: thunderx: set tso_hdrs pointer to NULL in nicvf_free_snd_queue
net: amd: add missing of_node_put()
team: no need to do team_notify_peers or team_mcast_rejoin when disabling port
virtio-net: fail XDP set if guest csum is negotiated
virtio-net: disable guest csum during XDP set
net/sched: act_police: add missing spinlock initialization
net: don't keep lonely packets forever in the gro hash
net/ipv6: re-do dad when interface has IFF_NOARP flag change
packet: copy user buffers before orphan or clone
ibmvnic: Update driver queues after change in ring size support
ibmvnic: Fix RX queue buffer cleanup
net: thunderx: set xdp_prog to NULL if bpf_prog_add fails
net/dim: Update DIM start sample after each DIM iteration
net: faraday: ftmac100: remove netif_running(netdev) check before disabling interrupts
net/smc: use after free fix in smc_wr_tx_put_slot()
net/smc: atomic SMCD cursor handling
net/smc: add SMC-D shutdown signal
...
|
|
tpacket_snd sends packets with user pages linked into skb frags. It
notifies that pages can be reused when the skb is released by setting
skb->destructor to tpacket_destruct_skb.
This can cause data corruption if the skb is orphaned (e.g., on
transmit through veth) or cloned (e.g., on mirror to another psock).
Create a kernel-private copy of data in these cases, same as tun/tap
zerocopy transmission. Reuse that infrastructure: mark the skb as
SKBTX_ZEROCOPY_FRAG, which will trigger copy in skb_orphan_frags(_rx).
Unlike other zerocopy packets, do not set shinfo destructor_arg to
struct ubuf_info. tpacket_destruct_skb already uses that ptr to notify
when the original skb is released and a timestamp is recorded. Do not
change this timestamp behavior. The ubuf_info->callback is not needed
anyway, as no zerocopy notification is expected.
Mark destructor_arg as not-a-uarg by setting the lower bit to 1. The
resulting value is not a valid ubuf_info pointer, nor a valid
tpacket_snd frame address. Add skb_zcopy_.._nouarg helpers for this.
The fix relies on features introduced in commit 52267790ef52 ("sock:
add MSG_ZEROCOPY"), so can be backported as is only to 4.14.
Tested with from `./in_netns.sh ./txring_overwrite` from
http://github.com/wdebruij/kerneltools/tests
Fixes: 69e3c75f4d54 ("net: TX_RING and packet mmap")
Reported-by: Anand H. Krishnan <anandhkrishnan@gmail.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On every iteration of net_dim, the algorithm may choose to
check for the system state by comparing current data sample
with previous data sample. After each of these comparison,
regardless of the action taken, the sample used as baseline
is needed to be updated.
This patch fixes a bug that causes DIM to take wrong decisions,
due to never updating the baseline sample for comparison between
iterations. This way, DIM always compares current sample with
zeros.
Although this is a functional fix, it also improves and stabilizes
performance as the algorithm works properly now.
Performance:
Tested single UDP TX stream with pktgen:
samples/pktgen/pktgen_sample03_burst_single_flow.sh -i p4p2 -d 1.1.1.1
-m 24:8a:07:88:26:8b -f 3 -b 128
ConnectX-5 100GbE packet rate improved from 15-19Mpps to 19-20Mpps.
Also, toggling between profiles is less frequent with the fix.
Fixes: 8115b750dbcb ("net/dim: use struct net_dim_sample as arg to net_dim")
Signed-off-by: Tal Gilboa <talgi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of small USB fixes for 4.20-rc4.
There's the usual xhci and dwc2/3 fixes as well as a few minor other
issues resolved for problems that have been reported. Full details are
in the shortlog.
All have been in linux-next for a while with no reported issues"
* tag 'usb-4.20-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: cdc-acm: add entry for Hiro (Conexant) modem
usb: xhci: Prevent bus suspend if a port connect change or polling state is detected
usb: core: Fix hub port connection events lost
usb: dwc3: gadget: fix ISOC TRB type on unaligned transfers
Revert "usb: gadget: ffs: Fix BUG when userland exits with submitted AIO transfers"
usb: dwc2: pci: Fix an error code in probe
usb: dwc3: Fix NULL pointer exception in dwc3_pci_remove()
xhci: Add quirk to workaround the errata seen on Cavium Thunder-X2 Soc
usb: xhci: fix timeout for transition from RExit to U0
usb: xhci: fix uninitialized completion when USB3 port got wrong status
xhci: Add check for invalid byte size error when UAS devices are connected.
xhci: handle port status events for removed USB3 hcd
xhci: Fix leaking USB3 shared_hcd at xhci removal
USB: misc: appledisplay: add 20" Apple Cinema Display
USB: quirks: Add no-lpm quirk for Raydium touchscreens
usb: quirks: Add delay-init quirk for Corsair K70 LUX RGB
USB: Wait for extra delay time after USB_PORT_FEAT_RESET for quirky hub
usb: dwc3: gadget: Properly check last unaligned/zero chain TRB
usb: dwc3: core: Clean up ULPI device
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus
Jonathan writes:
First set of IIO fixes for the 4.20 cycle.
* st_magn
- Avoid an ordering issue that lead to large numbers of unhandled
interrupts whilst enabling buffered capture.
* hid-sensors
- Fix a long running problem with signed values reading wrong from
sysfs on these sensors. It appears people were only using the
buffered interface. These typically occur in laptops so chances
are everyone was using the sensor-proxy which will use the buffered
interface by default.
* tag 'iio-fixes-for-4.20a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio/hid-sensors: Fix IIO_CHAN_INFO_RAW returning wrong values for signed numbers
iio:st_magn: Fix enable device after trigger
|
|
This reverts commit aaf9978c3c0291ef3beaa97610bc9c3084656a85.
Quoting Peter:
There is a HID feature report called "Resolution Multiplier"
Described in the "Enhanced Wheel Support in Windows" doc and
the "USB HID Usage Tables" page 30.
http://download.microsoft.com/download/b/d/1/bd1f7ef4-7d72-419e-bc5c-9f79ad7bb66e/wheel.docx
https://www.usb.org/sites/default/files/documents/hut1_12v2.pdf
This was new for Windows Vista, so we're only a decade behind here. I only
accidentally found this a few days ago while debugging a stuck button on a
Microsoft mouse.
The docs above describe it like this: a wheel control by default sends
value 1 per notch. If the resolution multiplier is active, the wheel is
expected to send a value of $multiplier per notch (e.g. MS Sculpt mouse) or
just send events more often, i.e. for less physical motion (e.g. MS Comfort
mouse).
For the latter, you need the right HW of course. The Sculpt mouse has
tactile wheel clicks, so nothing really changes. The Comfort mouse has
continuous motion with no tactile clicks. Similar to the free-wheeling
Logitech mice but without any inertia.
Note that the doc also says that Vista and onwards *always* enable this
feature where available.
An example HID definition looks like this:
Usage Page Generic Desktop (0x01)
Usage Resolution Multiplier (0x48)
Logical Minimum 0
Logical Maximum 1
Physical Minimum 1
Physical Maximum 16
Report Size 2 # in bits
Report Count 1
Feature (Data, Var, Abs)
So the actual bits have values 0 or 1 and that reflects real values 1 or 16.
We've only seen single-bits so far, so there's low-res and hi-res, but
nothing in between.
The multiplier is available for HID usages "Wheel" and "AC Pan" (horiz wheel).
Microsoft suggests that
> Vendors should ship their devices with smooth scrolling disabled and allow
> Windows to enable it. This ensures that the device works like a regular HID
> device on legacy operating systems that do not support smooth scrolling.
(see the wheel doc linked above)
The mice that we tested so far do reset on unplug.
Device Support looks to be all (?) Microsoft mice but nothing else
Not supported:
- Logitech G500s, G303
- Roccat Kone XTD
- all the cheap Lenovo, HP, Dell, Logitech USB mice that come with a
workstation that I could find don't have it.
- Etekcity something something
- Razer Imperator
Supported:
- Microsoft Comfort Optical Mouse 3000 - yes, physical: 1:4
- Microsoft Sculpt Ergonomic Mouse - yes, physical: 1:12
- Microsoft Surface mouse - yes, physical: 1:4
So again, I think this is really just available on Microsoft mice, but
probably all decent MS mice released over the last decade.
Looking at the hardware itself:
- no noticeable notches in the weel
- low-res: 18 events per 360deg rotation (click angle 20 deg)
- high-res: 72 events per 360deg → matches multiplier of 4
- I can feel the notches during wheel turns
- low-res: 24 events per 360 deg rotation (click angle 15 deg)
- horiz wheel is tilt-based, continuous output value 1
- high-res: 24 events per 360deg with value 12 → matches multiplier of 12
- horiz wheel output rate doubles/triples?, values is 3
- It's a touch strip, not a wheel so no notches
- high-res: events have value 4 instead of 1
a bit strange given that it doesn't actually have notches.
Ok, why is this an issue for the current API? First, because the logitech
multiplier used in Harry's patches looks suspiciously like the Resolution
Multiplier so I think we should assume it's the same thing. Nestor, can you
shed some light on that?
- `REL_WHEEL` is defined as the number of notches, emulated where needed.
- `REL_WHEEL_HI_RES` is the movement of the user's finger in microns.
- `WM_MOUSEWHEEL` (Windows) is is a multiple of 120, defined as "the threshold
for action to be taken and one such action"
https://docs.microsoft.com/en-us/windows/desktop/inputdev/wm-mousewheel
If the multiplier is set to M, this means we need an accumulated value of M
until we can claim there was a wheel click. So after enabling the multiplier
and setting it to the maximum (like Windows):
- M units are 15deg rotation → 1 unit is 2620/M micron (see below). This is
the `REL_WHEEL_HI_RES` value.
- wheel diameter 20mm: 15 deg rotation is 2.62mm, 2620 micron (pi * 20mm /
(360deg/15deg))
- For every M units accumulated, send one `REL_WHEEL` event
The problem here is that we've now hardcoded 20mm/15 deg into the kernel and
we have no way of getting the size of the wheel or the click angle into the
kernel.
In userspace we now have to undo the kernel's calculation. If our click angle
is e.g. 20 degree we have to undo the (lossy) calculation from the kernel and
calculate the correct angle instead. This also means the 15 is a hardcoded
option forever and cannot be changed.
In hid-logitech-hidpp.c, the microns per unit is hardcoded per device.
Harry, did you measure those by hand? We'd need to update the kernel for
every device and there are 10 years worth of devices from MS alone.
The multiplier default is 8 which is in the right ballpark, so I'm pretty
sure this is the same as the Resolution Multiplier, just in HID++ lingo. And
given that the 120 magic factor is what Windows uses in the end, I can't
imagine Logitech rolling their own thing here. Nestor?
And we're already fairly inaccurate with the microns anyway. The MX Anywhere
2S has a click angle of 20 degrees (18 stops) and a 17mm wheel, so a wheel
notch is approximately 2.67mm, one event at multiplier 8 (1/8 of a notch)
would be 334 micron. That's only 80% of the fallback value of 406 in the
kernel. Multiplier 6 gives us 445micron (10% off). I'm assuming multiplier 7
doesn't exist because it's not a factor of 120.
Summary:
Best option may be to simply do what Windows is doing, all the HW manufacturers
have to use that approach after all. Switch `REL_WHEEL_HI_RES` to report in
fractions of 120, with 120 being one notch and divide that by the multiplier
for the actual events. So e.g. the Logitech multiplier 8 would send value 15
for each event in hi-res mode. This can be converted in userspace to
whatever userspace needs (combined with a hwdb there that tells you wheel
size/click angle/...).
Conflicts:
include/uapi/linux/input-event-codes.h -> I kept the new
reserved event in the code, so I had to adapt the revert
slightly
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Harry Cutts <hcutts@chromium.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
|
|
This reverts commit 1ff2e1a44e02d4bdbb9be67c7d9acc240a67141f.
It turns out the current API is not that compatible with
some Microsoft mice, so better start again from scratch.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Harry Cutts <hcutts@chromium.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Jiri Kosina <jkosina@suse.cz>
|
|
Jean-Louis reported a TCP regression and bisected to recent SACK
compression.
After a loss episode (receiver not able to keep up and dropping
packets because its backlog is full), linux TCP stack is sending
a single SACK (DUPACK).
Sender waits a full RTO timer before recovering losses.
While RFC 6675 says in section 5, "Algorithm Details",
(2) If DupAcks < DupThresh but IsLost (HighACK + 1) returns true --
indicating at least three segments have arrived above the current
cumulative acknowledgment point, which is taken to indicate loss
-- go to step (4).
...
(4) Invoke fast retransmit and enter loss recovery as follows:
there are old TCP stacks not implementing this strategy, and
still counting the dupacks before starting fast retransmit.
While these stacks probably perform poorly when receivers implement
LRO/GRO, we should be a little more gentle to them.
This patch makes sure we do not enable SACK compression unless
3 dupacks have been sent since last rcv_nxt update.
Ideally we should even rearm the timer to send one or two
more DUPACK if no more packets are coming, but that will
be work aiming for linux-4.21.
Many thanks to Jean-Louis for bisecting the issue, providing
packet captures and testing this patch.
Fixes: 5d9f4262b7ea ("tcp: add SACK compression")
Reported-by: Jean-Louis Dupond <jean-louis@dupond.be>
Tested-by: Jean-Louis Dupond <jean-louis@dupond.be>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
With the overflow buffer removed, we no longer have a unique address
which is guaranteed not to be a valid DMA target to use as an error
token. The DIRECT_MAPPING_ERROR value of 0 tries to at least represent
an unlikely DMA target, but unfortunately there are already SWIOTLB
users with DMA-able memory at physical address 0 which now gets falsely
treated as a mapping failure and leads to all manner of misbehaviour.
The best we can do to mitigate that is flip DIRECT_MAPPING_ERROR to the
other commonly-used error value of all-bits-set, since the last single
byte of memory is by far the least-likely-valid DMA target.
Fixes: dff8d6c1ed58 ("swiotlb: remove the overflow buffer")
Reported-by: John Stultz <john.stultz@linaro.org>
Tested-by: John Stultz <john.stultz@linaro.org>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
The portable type for a wait queue is wait_queue_head_t.
Signed-off-by: Jasmin Jessich <jasmin@anw.at>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- add a missing include at v4l2-controls uAPI header
- minor kAPI update for the request API
- some fixes at CEC core
- use a lower minimum height for the virtual codec driver
- cleanup a gcc warning due to the lack of a fall though markup
- tc358743: Remove unnecessary self assignment
- fix the V4L event subscription logic
- docs: Document metadata format in struct v4l2_format
- omap3isp and ipu3-cio2: fix unbinding logic
* tag 'media/v4.20-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: ipu3-cio2: Use cio2_queues_exit
media: ipu3-cio2: Unregister device nodes first, then release resources
media: omap3isp: Unregister media device as first
media: docs: Document metadata format in struct v4l2_format
media: v4l: event: Add subscription to list before calling "add" operation
media: dm365_ipipeif: better annotate a fall though
media: Rename vb2_m2m_request_queue -> v4l2_m2m_request_queue
media: cec: increase debug level for 'queue full'
media: cec: check for non-OK/NACK conditions while claiming a LA
media: vicodec: lower minimum height to 360
media: tc358743: Remove unnecessary self assignment
media: v4l: fix uapi mpeg slice params definition
v4l2-controls: add a missing include
|
|
This reverts commit 22d7be267eaa8114dcc28d66c1c347f667d7878a.
The dst's mtu in transport can be updated by a non sctp place like
in xfrm where the MTU information didn't get synced between asoc,
transport and dst, so it is still needed to do the pmtu check
in sctp_packet_config.
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull networking fixes from David Miller:
1) Fix some potentially uninitialized variables and use-after-free in
kvaser_usb can drier, from Jimmy Assarsson.
2) Fix leaks in qed driver, from Denis Bolotin.
3) Socket leak in l2tp, from Xin Long.
4) RSS context allocation fix in bnxt_en from Michael Chan.
5) Fix cxgb4 build errors, from Ganesh Goudar.
6) Route leaks in ipv6 when removing exceptions, from Xin Long.
7) Memory leak in IDR allocation handling of act_pedit, from Davide
Caratti.
8) Use-after-free of bridge vlan stats, from Nikolay Aleksandrov.
9) When MTU is locked, do not force DF bit on ipv4 tunnels. From
Sabrina Dubroca.
10) When NAPI cached skb is reused, we must set it to the proper initial
state which includes skb->pkt_type. From Eric Dumazet.
11) Lockdep and non-linear SKB handling fix in tipc from Jon Maloy.
12) Set RX queue properly in various tuntap receive paths, from Matthew
Cover.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (61 commits)
tuntap: fix multiqueue rx
ipv6: Fix PMTU updates for UDP/raw sockets in presence of VRF
tipc: don't assume linear buffer when reading ancillary data
tipc: fix lockdep warning when reinitilaizing sockets
net-gro: reset skb->pkt_type in napi_reuse_skb()
tc-testing: tdc.py: Guard against lack of returncode in executed command
tc-testing: tdc.py: ignore errors when decoding stdout/stderr
ip_tunnel: don't force DF when MTU is locked
MAINTAINERS: Add entry for CAKE qdisc
net: bridge: fix vlan stats use-after-free on destruction
socket: do a generic_file_splice_read when proto_ops has no splice_read
net: phy: mdio-gpio: Fix working over slow can_sleep GPIOs
Revert "net: phy: mdio-gpio: Fix working over slow can_sleep GPIOs"
net: phy: mdio-gpio: Fix working over slow can_sleep GPIOs
net/sched: act_pedit: fix memory leak when IDR allocation fails
net: lantiq: Fix returned value in case of error in 'xrx200_probe()'
ipv6: fix a dst leak when removing its exception
net: mvneta: Don't advertise 2.5G modes
drivers/net/ethernet/qlogic/qed/qed_rdma.h: fix typo
net/mlx4: Fix UBSAN warning of signed integer overflow
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI fixes from Ingo Molnar:
"Misc fixes: two warning splat fixes, a leak fix and persistent memory
allocation fixes for ARM"
* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: Permit calling efi_mem_reserve_persistent() from atomic context
efi/arm: Defer persistent reservations until after paging_init()
efi/arm/libstub: Pack FDT after populating it
efi/arm: Revert deferred unmap of early memmap mapping
efi: Fix debugobjects warning on 'efi_rts_work'
|
|
Pull block fixes from Jens Axboe:
- Discard loop fix, caused by integer overflow (Dave)
- Blacklist of Samsung drive that hangs with power management (Diego)
- Copy bio priority when cloning it (Hannes)
- Fix race condition exposed in floppy (me)
- Fix SCSI queue cleanup regression. While elusive, it caused oopses in
queue running (Ming)
- Fix bad string copy in kyber tracing (Omar)
* tag 'for-linus-20181115' of git://git.kernel.dk/linux-block:
SCSI: fix queue cleanup race before queue initialization is done
block: fix 32 bit overflow in __blkdev_issue_discard()
libata: blacklist SAMSUNG MZ7TD256HAFV-000L9 SSD
block: copy ioprio in __bio_clone_fast() and bounce
kyber: fix wrong strlcpy() size in trace_kyber_latency()
floppy: fix race condition in __floppy_read_block_0()
|
|
Before this commit sensor_hub_input_attr_get_raw_value() failed to take
the signedness of 16 and 8 bit values into account, returning e.g.
65436 instead of -100 for the z-axis reading of an accelerometer.
This commit adds a new is_signed parameter to the function and makes all
callers pass the appropriate value for this.
While at it, this commit also fixes up some neighboring lines where
statements were needlessly split over 2 lines to improve readability.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
The life-checking function, which is used by kAFS to make sure that a call
is still live in the event of a pending signal, only samples the received
packet serial number counter; it doesn't actually provoke a change in the
counter, rather relying on the server to happen to give us a packet in the
time window.
Fix this by adding a function to force a ping to be transmitted.
kAFS then keeps track of whether there's been a stall, and if so, uses the
new function to ping the server, resetting the timeout to allow the reply
to come back.
If there's a stall, a ping and the call is *still* stalled in the same
place after another period, then the call will be aborted.
Fixes: bc5e3a546d55 ("rxrpc: Use MSG_WAITALL to tell sendmsg() to temporarily ignore signals")
Fixes: f4d15fb6f99a ("rxrpc: Provide functions for allowing cleaner handling of signals")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The new memory EFI reservation feature we introduced to allow memory
reservations to persist across kexec may trigger an unbounded number
of calls to memblock_reserve(). The memblock subsystem can deal with
this fine, but not before memblock resizing is enabled, which we can
only do after paging_init(), when the memory we reallocate the array
into is actually mapped.
So break out the memreserve table processing into a separate routine
and call it after paging_init() on arm64. On ARM, because of limited
reviewing bandwidth of the maintainer, we cannot currently fix this,
so instead, disable the EFI persistent memreserve entirely on ARM so
we can fix it later.
Tested-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20181114175544.12860-5-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2018-11-09
this is a pull request of 20 patches for net/master.
First we have a patch by Oliver Hartkopp which changes the raw socket's
raw_sendmsg() to return an error value if the user tries to send a CANFD
frame to a CAN-2.0 device.
The next two patches are by Jimmy Assarsson and fix potential problems
in the kvaser_usb driver.
YueHaibing's patches for the ucan driver fix a compile time warning and
remove a duplicate include.
Eugeniu Rosca patch adds more binding documentation to the rcar_can
driver bindings. The next two patches are by Fabrizio Castro for the
rcar_can driver and fixes a problem in the driver's probe function and
document the r8a774a1 binding.
Lukas Wunner's patch fixes a recpetion problem in hi311x driver by
switching from edge to level triggered interruts.
The next three patches all target the flexcan driver. Pankaj Bansal's
patch unconditionally unlocks the last mailbox used for RX. Alexander
Stein provides a better workaround for a hardware limitation when
sending RTR frames, by using the last mailbox for TX, resulting in fewer
lost frames. The patch by me simplyfies the driver, by making a runtime
value a compile time constant.
The following 4 patches are by me and provide the groundwork for the
next patches by Oleksij Rempel. To avoid code duplication common code in
the common CAN driver infrastructure is factured out and error handling
is cleaned up.
The next 4 patches are by Oleksij Rempel and fix the problem in the
flexcan driver that other processes see TX frames arrive out of order
with ragards to a RX'ed frame (which are send by a different system on
the CAN bus as the result of our TX frame).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When copying to the latency type, we should be passing LATENCY_TYPE_LEN,
not DOMAIN_LEN (this isn't a problem in practice because we only pass
"total" or "I/O"). Fix it by changing all of the strlcpy() calls to use
sizeof().
Fixes: 6c3b7af1c975 ("kyber: add tracepoints")
Reported-by: Jordan Glover <Golden_Miller83@protonmail.ch>
Tested-by: Jordan Glover <Golden_Miller83@protonmail.ch>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
tracehook_report_syscall_entry() is called not only
if %TIF_SYSCALL_TRACE is set, but also if %TIF_SYSCALL_EMU is set,
as appears from x86's entry code.
Signed-off-by: Elvira Khabirova <lineprinter@altlinux.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: ldv@altlinux.org
Cc: oleg@redhat.com
Cc: rostedt@goodmis.org
Link: http://lkml.kernel.org/r/20181110042209.26333972@akathisia
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A set of x86 fixes:
- Cure the LDT remapping to user space on 5 level paging which ended
up in the KASLR space
- Remove LDT mapping before freeing the LDT pages
- Make NFIT MCE handling more robust
- Unbreak the VSMP build by removing the dependency on paravirt ops
- Support broken PIT emulation on Microsoft hyperV
- Don't trace vmware_sched_clock() to avoid tracer recursion
- Remove -pipe from KBUILD CFLAGS which breaks clang and is also
slower on GCC
- Trivial coding style and typo fixes"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpu/vmware: Do not trace vmware_sched_clock()
x86/vsmp: Remove dependency on pv_irq_ops
x86/ldt: Remove unused variable in map_ldt_struct()
x86/ldt: Unmap PTEs for the slot before freeing LDT pages
x86/mm: Move LDT remap out of KASLR region on 5-level paging
acpi/nfit, x86/mce: Validate a MCE's address before using it
acpi/nfit, x86/mce: Handle only uncorrectable machine checks
x86/build: Remove -pipe from KBUILD_CFLAGS
x86/hyper-v: Fix indentation in hv_do_fast_hypercall16()
Documentation/x86: Fix typo in zero-page.txt
x86/hyper-v: Enable PIT shutdown quirk
clockevents/drivers/i8253: Add support for PIT shutdown quirk
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core fixes from Thomas Gleixner:
"A couple of fixlets for the core:
- Kernel doc function documentation fixes
- Missing prototypes for weak watchdog functions"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
resource/docs: Complete kernel-doc style function documentation
watchdog/core: Add missing prototypes for weak functions
resource/docs: Fix new kernel-doc warnings
|
|
Pull drm fixes from Dave Airlie:
"drm: i915, amdgpu, sun4i, exynos and etnaviv fixes:
- amdgpu has some display fixes, KFD ioctl fixes and a Vega20 bios
interaction fix.
- sun4i has some NULL checks added
- i915 has a 32-bit system fix, LPE audio oops, and HDMI2.0 clock
fixes.
- Exynos has a 3 regression fixes (one frame counter, fbdev missing,
dsi->panel check)
- Etnaviv has a single fencing fix for GPU recovery"
* tag 'drm-fixes-2018-11-11' of git://anongit.freedesktop.org/drm/drm: (39 commits)
drm/amd/amdgpu/dm: Fix dm_dp_create_fake_mst_encoder()
drm/amd/display: Drop reusing drm connector for MST
drm/amd/display: Cleanup MST non-atomic code workaround
drm/amd/powerplay: always use fast UCLK switching when UCLK DPM enabled
drm/amd/powerplay: set a default fclk/gfxclk ratio
drm/amdgpu/display/dce11: only enable FBC when selected
drm/amdgpu/display/dm: handle FBC dc feature parameter
drm/amdgpu/display/dc: add FBC to dc_config
drm/amdgpu: add DC feature mask module parameter
drm/amdgpu/display: check if fbc is available in set_static_screen_control (v2)
drm/amdgpu/vega20: add CLK base offset
drm/amd/display: Stop leaking planes
drm/amd/display: Fix misleading buffer information
Revert "drm/amd/display: set backlight level limit to 1"
drm/amd: Update atom_smu_info_v3_3 structure
drm/i915: Fix ilk+ watermarks when disabling pipes
drm/sun4i: tcon: prevent tcon->panel dereference if NULL
drm/sun4i: tcon: fix check of tcon->panel null pointer
drm/i915: Don't oops during modeset shutdown after lpe audio deinit
drm/i915: Mark pin flags as u64
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Several fixes, mostly for rather recent regressions when running under
Xen"
* tag 'for-linus-4.20a-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: remove size limit of privcmd-buf mapping interface
xen: fix xen_qlock_wait()
x86/xen: fix pv boot
xen-blkfront: fix kernel panic with negotiate_mq error path
xen/grant-table: Fix incorrect gnttab_dma_free_pages() pr_debug message
CONFIG_XEN_PV breaks xen_create_contiguous_region on ARM
|
|
Pull Ceph fixes from Ilya Dryomov:
"Two CephFS fixes (copy_file_range and quota) and a small feature bit
cleanup"
* tag 'ceph-for-4.20-rc2' of https://github.com/ceph/ceph-client:
libceph: assume argonaut on the server side
ceph: quota: fix null pointer dereference in quota check
ceph: add destination file data sync before doing any remote copy
|
|
can_rx_offload_queue_tail()
This function has nothing todo with error.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
|
