summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2018-10-04ACPICA: Update for generic_serial_bus and attrib_raw_process_bytes protocolBob Moore
Cleanup for this write-then-read protocol. The ACPI specification is rather unclear for the entire generic_serial_bus, but this change works correctly on the Surface 3. Reported-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Schmauss <erik.schmauss@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-10-04Merge branch 'linus' into x86/core, to pick up fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-10-04Merge branch 'for-linus' into for-nextTakashi Iwai
Back-merge 4.19-devel branch into 4.20 for applying FireWire patches cleanly. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Minor conflict in net/core/rtnetlink.c, David Ahern's bug fix in 'net' overlapped the renaming of a netlink attribute in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-04BackMerge v4.19-rc6 into drm-nextDave Airlie
I have some pulls based on rc6, and I prefer to have an explicit backmerge. Signed-off-by: Dave Airlie <airlied@redhat.com>
2018-10-04Merge tag 'exynos-drm-next-for-v4.20' of ↵Dave Airlie
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next Add out-bridge support - This patch series enables out-bridge for LVDS bridge device support, and also includes two cleanups and one relevant dt binding update for this. Add Samsung 16x16 tiled format support - This patch series adds Samsung 16x16 tiled format to scaler and gsc drivers. As for this, it adds Samsung specific format to drm_forcc.h header. For the git-pull request with relevant patches, I requested ack-by[1] to relevant maintainers but there was no any response. I'm pretty sure no problem to go to mainline though Exynos tree because the only user of it is Exynos. (airlied: this looked fine to me) [1] https://patchwork.freedesktop.org/patch/243921/ Add configurable plane alpha and pixel blend mode support - This patch series makes mixer driver to be configuragle for pixel blend mode and plane alpha, which also includes one fixup to set all default values correctly after reset. One cleanup - This patch replaces drm_atomic_helper_suspend/resume() with drm_mode_config_helper_suspend/resume() to remove exynos specific suspend_state. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Inki Dae <inki.dae@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/1538380891-24040-1-git-send-email-inki.dae@samsung.com
2018-10-04Merge branch 'vmwgfx-next' of git://people.freedesktop.org/~thomash/linux ↵Dave Airlie
into drm-next Mostly code reorganizations and optimizations for vmwgfx. - Move TTM code that's only used by vmwgfx to vmwgfx - Break out the vmwgfx buffer- and resource validation code to a separate source file - Get rid of a number of atomic operations during command buffer validation. From: Thomas Hellstrom <thellstrom@vmware.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180928131157.2810-1-thellstrom@vmware.com
2018-10-03net/mlx5: Add Fast teardown supportFeras Daoud
Today mlx5 devices support two teardown modes: 1- Regular teardown 2- Force teardown This change introduces the enhanced version of the "Force teardown" that allows SW to perform teardown in a faster way without the need to reclaim all the pages. Fast teardown provides the following advantages: 1- Fix a FW race condition that could cause command timeout 2- Avoid moving to polling mode 3- Close the vport to prevent PCI ACK to be sent without been scatter to memory Signed-off-by: Feras Daoud <ferasda@mellanox.com> Reviewed-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-10-03devlink: Add extack for eswitch operationsEli Britstein
Add extack argument to the eswitch related operations. Signed-off-by: Eli Britstein <elibr@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Roi Dayan <roid@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-10-03Merge gitolite.kernel.org:/pub/scm/linux/kernel/git/davem/netGreg Kroah-Hartman
David writes: "Networking fixes: 1) Prefix length validation in xfrm layer, from Steffen Klassert. 2) TX status reporting fix in mac80211, from Andrei Otcheretianski. 3) Fix hangs due to TX_DROP in mac80211, from Bob Copeland. 4) Fix DMA error regression in b43, from Larry Finger. 5) Add input validation to xenvif_set_hash_mapping(), from Jan Beulich. 6) SMMU unmapping fix in hns driver, from Yunsheng Lin. 7) Bluetooh crash in unpairing on SMP, from Matias Karhumaa. 8) WoL handling fixes in the phy layer, from Heiner Kallweit. 9) Fix deadlock in bonding, from Mahesh Bandewar. 10) Fill ttl inherit infor in vxlan driver, from Hangbin Liu. 11) Fix TX timeouts during netpoll, from Michael Chan. 12) RXRPC layer fixes from David Howells. 13) Another batch of ndo_poll_controller() removals to deal with excessive resource consumption during load. From Eric Dumazet. 14) Fix a specific TIPC failure secnario, from LUU Duc Canh. 15) Really disable clocks in r8169 during suspend so that low power states can actually be reached. 16) Fix SYN backlog lockdep issue in tcp and dccp, from Eric Dumazet. 17) Fix RCU locking in netpoll SKB send, which shows up in bonding, from Dave Jones. 18) Fix TX stalls in r8169, from Heiner Kallweit. 19) Fix locksup in nfp due to control message storms, from Jakub Kicinski. 20) Various rmnet bug fixes from Subash Abhinov Kasiviswanathan and Sean Tranchetti. 21) Fix use after free in ip_cmsg_recv_dstaddr(), from Eric Dumazet." * gitolite.kernel.org:/pub/scm/linux/kernel/git/davem/net: (122 commits) ixgbe: check return value of napi_complete_done() sctp: fix fall-through annotation r8169: always autoneg on resume ipv4: fix use-after-free in ip_cmsg_recv_dstaddr() net: qualcomm: rmnet: Fix incorrect allocation flag in receive path net: qualcomm: rmnet: Fix incorrect allocation flag in transmit net: qualcomm: rmnet: Skip processing loopback packets net: systemport: Fix wake-up interrupt race during resume rtnl: limit IFLA_NUM_TX_QUEUES and IFLA_NUM_RX_QUEUES to 4096 bonding: fix warning message inet: make sure to grab rcu_read_lock before using ireq->ireq_opt nfp: avoid soft lockups under control message storm declance: Fix continuation with the adapter identification message net: fec: fix rare tx timeout r8169: fix network stalls due to missing bit TXCFG_AUTO_FIFO tun: napi flags belong to tfile tun: initialize napi_mutex unconditionally tun: remove unused parameters bond: take rcu lock in netpoll_send_skb_on_dev rtnetlink: Fail dump if target netnsid is invalid ...
2018-10-03IB/{hfi1, qib, rdmavt}: Move ruc_loopback to rdmavtVenkata Sandeep Dhanalakota
This patch moves ruc_loopback() from hfi1 into rdmavt for code sharing with the qib driver. Reviewed-by: Brian Welty <brian.welty@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com> Signed-off-by: Harish Chegondi <harish.chegondi@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-03IB/{hfi1, qib, rdmavt}: Move send completion logic to rdmavtVenkata Sandeep Dhanalakota
Moving send completion code into rdmavt in order to have shared logic between qib and hfi1 drivers. Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Brian Welty <brian.welty@intel.com> Signed-off-by: Venkata Sandeep Dhanalakota <venkata.s.dhanalakota@intel.com> Signed-off-by: Harish Chegondi <harish.chegondi@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-03IB/{hfi1, qib, rdmavt}: Move copy SGE logic into rdmavtBrian Welty
This patch moves hfi1_copy_sge() into rdmavt for sharing with qib. This patch also moves all the wss_*() functions into rdmavt as several wss_*() functions are called from hfi1_copy_sge() When SGE copy mode is adaptive, cacheless copy may be done in some cases for performance reasons. In those cases, X86 cacheless copy function is called since the drivers that use rdmavt and may set SGE copy mode to adaptive are X86 only. For this reason, this patch adds "depends on X86_64" to rdmavt/Kconfig. Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Brian Welty <brian.welty@intel.com> Signed-off-by: Harish Chegondi <harish.chegondi@intel.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-03IB/mlx4: Avoid implicit enumerated type conversionNathan Chancellor
Clang warns when one enumerated type is implicitly converted to another. drivers/infiniband/hw/mlx4/mad.c:1811:41: warning: implicit conversion from enumeration type 'enum mlx4_ib_qp_flags' to different enumeration type 'enum ib_qp_create_flags' [-Wenum-conversion] qp_init_attr.init_attr.create_flags = MLX4_IB_SRIOV_TUNNEL_QP; ~ ^~~~~~~~~~~~~~~~~~~~~~~ drivers/infiniband/hw/mlx4/mad.c:1819:41: warning: implicit conversion from enumeration type 'enum mlx4_ib_qp_flags' to different enumeration type 'enum ib_qp_create_flags' [-Wenum-conversion] qp_init_attr.init_attr.create_flags = MLX4_IB_SRIOV_SQP; ~ ^~~~~~~~~~~~~~~~~ The type mlx4_ib_qp_flags explicitly provides supplemental values to the type ib_qp_create_flags. Make that clear to Clang by changing the create_flags type to u32. Reported-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-03RDMA/netlink: Simplify netlink listener existence checkLeon Romanovsky
All users of rdma_nl_chk_listeners() are interested to get boolean answer if netlink socket has listeners, so update all places to boolean function. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-03RDMA: Remove unused parameter from ib_modify_qp_is_ok()Kamal Heib
The ll parameter is not used in ib_modify_qp_is_ok(), so remove it. Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2018-10-03xprtrdma: Squelch a sparse warningChuck Lever
linux/include/trace/events/rpcrdma.h:501:1: warning: expression using sizeof bool linux/include/trace/events/rpcrdma.h:501:1: warning: odd constant _Bool cast (ffffffffffffffff becomes 1) Fixes: ab03eff58eb5 ("xprtrdma: Add trace points in RPC Call ... ") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-10-03SUNRPC: Add lockless lookup of the server's auth domainTrond Myklebust
Avoid taking the global auth_domain_lock in most lookups of the auth domain by adding an RCU protected lookup. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2018-10-03signal: Use a smaller struct siginfo in the kernelEric W. Biederman
We reserve 128 bytes for struct siginfo but only use about 48 bytes on 64bit and 32 bytes on 32bit. Someday we might use more but it is unlikely to be anytime soon. Userspace seems content with just enough bytes of siginfo to implement sigqueue. Or in the case of checkpoint/restart reinjecting signals the kernel has sent. Reducing the stack footprint and the work to copy siginfo around from 2 cachelines to 1 cachelines seems worth doing even if I don't have benchmarks to show a performance difference. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-10-03signal: Distinguish between kernel_siginfo and siginfoEric W. Biederman
Linus recently observed that if we did not worry about the padding member in struct siginfo it is only about 48 bytes, and 48 bytes is much nicer than 128 bytes for allocating on the stack and copying around in the kernel. The obvious thing of only adding the padding when userspace is including siginfo.h won't work as there are sigframe definitions in the kernel that embed struct siginfo. So split siginfo in two; kernel_siginfo and siginfo. Keeping the traditional name for the userspace definition. While the version that is used internally to the kernel and ultimately will not be padded to 128 bytes is called kernel_siginfo. The definition of struct kernel_siginfo I have put in include/signal_types.h A set of buildtime checks has been added to verify the two structures have the same field offsets. To make it easy to verify the change kernel_siginfo retains the same size as siginfo. The reduction in size comes in a following change. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-10-03signal: Introduce copy_siginfo_from_user and use it's return valueEric W. Biederman
In preparation for using a smaller version of siginfo in the kernel introduce copy_siginfo_from_user and use it when siginfo is copied from userspace. Make the pattern for using copy_siginfo_from_user and copy_siginfo_from_user32 to capture the return value and return that value on error. This is a necessary prerequisite for using a smaller siginfo in the kernel than the kernel exports to userspace. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-10-03signal: Remove the need for __ARCH_SI_PREABLE_SIZE and SI_PAD_SIZEEric W. Biederman
Rework the defintion of struct siginfo so that the array padding struct siginfo to SI_MAX_SIZE can be placed in a union along side of the rest of the struct siginfo members. The result is that we no longer need the __ARCH_SI_PREAMBLE_SIZE or SI_PAD_SIZE definitions. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-10-03virtchnl: Added support to exchange additional speed valuesYashaswini Raghuram Prathivadi Bhayankaram
Introduced a new virtchnl capability flag and a struct to support exchange of additional supported speeds. Signed-off-by: Yashaswini Raghuram Prathivadi Bhayankaram <yashaswini.raghuram.prathivadi.bhayankaram@intel.com> Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-10-03signal/sparc: Move EMT_TAGOVF into the generic siginfo.hEric W. Biederman
When moving all of the architectures specific si_codes into siginfo.h, I apparently overlooked EMT_TAGOVF. Move it now. Remove the now redundant test in siginfo_layout for SIGEMT as now NSIGEMT is always defined. Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2018-10-03xprtrdma: Rename rpcrdma_qp_async_error_upcallChuck Lever
Clean up: Use a function name that is consistent with the RDMA core API and with other consumers. Because this is a function that is invoked from outside the rpcrdma.ko module, add an appropriate documenting comment. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-10-03clocksource: Remove obsolete CLOCKSOURCE_OF_DECLAREDaniel Lezcano
The macro CLOCKSOURCE_OF_DECLARE was renamed more TIMER_OF_DECLARE, and we kept an alias CLOCKSOURCE_OF_DECLARE in order to smooth the transition for drivers. This change was done 1.5 year ago, we can reasonably remove this backward compatible macro as it is no longer used anywhere. Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
2018-10-03clk: ti: Add functions to save/restore clk contextRuss Dill
SoCs like AM43XX lose clock registers context during RTC-only suspend. Hence add functions to save/restore the clock registers context. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Russ Dill <Russ.Dill@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2018-10-03clk: clk: Add clk_gate_restore_context functionKeerthy
The clock gate restore context function enables or disables the gate clocks based on the enable_count. This is done in cases where the clock context is lost and based on the enable_count the clock either needs to be enabled/disabled. Signed-off-by: Keerthy <j-keerthy@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2018-10-03clk: Add functions to save/restore clock context en-masseRuss Dill
Deep enough power saving mode can result into losing context of the clock registers also, and they need to be restored once coming back from the power saving mode. Hence add functions to save/restore clock context. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Russ Dill <Russ.Dill@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tero Kristo <t-kristo@ti.com>
2018-10-03clk: ti: clkctrl: support multiple clkctrl nodes under a cm nodeTero Kristo
Currently, only one clkctrl node can be added under a specific CM node due to limitation with the implementation. Modify the code to pick-up clockdomain name from the clkctrl node instead of CM node if provided. Also, add a new flag to the TI clock driver so that both modes can be supported simultaneously. Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Tony Lindgren <tony@atomide.com>
2018-10-03dt-bindings: clock: dra7xx: add clkctrl indices for new data layoutTero Kristo
The new data layout will be split based on clockdomain boundaries, instead of CM boundaries. This introduces a few new clkctrl providers, that have different indices for the clkctrl data. Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Tony Lindgren <tony@atomide.com>
2018-10-03dt-bindings: clock: am43xx: add clkctrl indices for new data layoutTero Kristo
The new data layout will be split based on clockdomain boundaries, instead of CM boundaries. This introduces a few new clkctrl providers, that have different indices for the clkctrl data. Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Tony Lindgren <tony@atomide.com>
2018-10-03dt-bindings: clock: am33xx: add clkctrl indices for new data layoutTero Kristo
The new data layout will be split based on clockdomain boundaries, instead of CM boundaries. This introduces a few new clkctrl providers, that have different indices for the clkctrl data. Signed-off-by: Tero Kristo <t-kristo@ti.com> Tested-by: Tony Lindgren <tony@atomide.com>
2018-10-03Merge tag 'media/v4.19-3' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Mauro writes: "media fixes for v4.19-rc6" * tag 'media/v4.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: v4l: event: Prevent freeing event subscriptions while accessed
2018-10-03kvm: arm64: Allow tuning the physical address size for VMSuzuki K Poulose
Allow specifying the physical address size limit for a new VM via the kvm_type argument for the KVM_CREATE_VM ioctl. This allows us to finalise the stage2 page table as early as possible and hence perform the right checks on the memory slots without complication. The size is encoded as Log2(PA_Size) in bits[7:0] of the type field. For backward compatibility the value 0 is reserved and implies 40bits. Also, lift the limit of the IPA to host limit and allow lower IPA sizes (e.g, 32). The userspace could check the extension KVM_CAP_ARM_VM_IPA_SIZE for the availability of this feature. The cap check returns the maximum limit for the physical address shift supported by the host. Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Christoffer Dall <cdall@kernel.org> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-10-03media: v4l: event: Prevent freeing event subscriptions while accessedSakari Ailus
The event subscriptions are added to the subscribed event list while holding a spinlock, but that lock is subsequently released while still accessing the subscription object. This makes it possible to unsubscribe the event --- and freeing the subscription object's memory --- while the subscription object is simultaneously accessed. Prevent this by adding a mutex to serialise the event subscription and unsubscription. This also gives a guarantee to the callback ops that the add op has returned before the del op is called. This change also results in making the elems field less special: subscriptions are only added to the event list once they are fully initialised. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: stable@vger.kernel.org # for 4.14 and up Fixes: c3b5b0241f62 ("V4L/DVB: V4L: Events: Add backend") Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-10-03irqchip/gic: Unify GIC priority definitionsJulien Thierry
LPIs use the same priority value as other GIC interrupts. Make the GIC default priority definition visible to ITS implementation and use this same definition for LPI priorities. Tested-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Julien Thierry <julien.thierry@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2018-10-03netfilter: xt_quota: fix the behavior of xt_quota moduleChenbo Feng
A major flaw of the current xt_quota module is that quota in a specific rule gets reset every time there is a rule change in the same table. It makes the xt_quota module not very useful in a table in which iptables rules are changed at run time. This fix introduces a new counter that is visible to userspace as the remaining quota of the current rule. When userspace restores the rules in a table, it can restore the counter to the remaining quota instead of resetting it to the full quota. Signed-off-by: Chenbo Feng <fengc@google.com> Suggested-by: Maciej Żenczykowski <maze@google.com> Reviewed-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2018-10-03mtd: rawnand: Allow selection of ECC byte ordering at runtimeBoris Brezillon
Currently, the selection of ECC byte ordering for software hamming is done at compilation time, which doesn't make sense when ECC byte calculation is done in hardware and byte ordering is forced by the hardware engine. In this case, only the correction is done in software and we want to force the byte-ordering no matter the value of CONFIG_MTD_NAND_ECC_SMC. This is typically the case for the FSMC (Smart Media ordering), TMIO and TXX9NDFMC (regular byte ordering) blocks. For all other use cases (pure software implementation, SM FTL and nandecctest), we keep selecting the byte ordering based on the CONFIG_MTD_NAND_ECC_SMC value. It might not be ideal for SM FTL (I'd expect Smart Media ordering to be employed by the Smart Media FTL), but this option doesn't seem to be enabled in the existing _defconfig, so I can't tell setting sm_order to true is the right choice. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Move JEDEC code to nand_jedec.cBoris Brezillon
This moves JEDEC related code to nand_jedec.c and JEDEC related struct/macros to include/linux/mtd/jedec.h. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Move ONFI code to nand_onfi.cBoris Brezillon
This moves ONFI related code to nand_onfi.c and ONFI related struct/macros to include/linux/mtd/onfi.h. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Keep all internal stuff privateBoris Brezillon
A lot of things defined in rawnand.h should not be exposed to NAND controller drivers and should only be shared by core files. Create the drivers/mtd/nand/raw/internals.h header to store such definitions, and move all private defs to this header. Also remove EXPORT_SYMBOLS() on functions that are not supposed to be exposed. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Inline onfi_get_async_timing_mode()Boris Brezillon
onfi_get_async_timing_mode() is only used in one place inside nand_base.c. Let's inline the code and kill the helper. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Move platform_nand_xxx definitions out of rawnand.hBoris Brezillon
platform_nand_xxx definitions are just used by the plat_nand driver. Let's move those definitions out of the core/driver-agnostic rawnand.h header. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Get rid of a few unused definitionsBoris Brezillon
Those definitions are not used, let's remove them. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Get rid of the duplicate nand_chip forward declarationBoris Brezillon
There's already a forward declaration of nand_chip at the beginning of the file. Get rid of this one. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Get rid of nand_flash_dev forward declationBoris Brezillon
nand_scan[with_ids]() have been moved at the end of the file. We can now get rid of of the nand_flash_dev forward declaration. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Move function prototypes after struct declarationsBoris Brezillon
Move nand_scan[_with_ids]() and nand_wait_ready() at the end of the file where all function prototype lies. This will also allow us to get rid of the nand_flash_dev forward declaration. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Deprecate ->chip_delayBoris Brezillon
The wait timeouts and delays are directly extracted from the NAND timings and ->chip_delay is only used in legacy path, so let's move it to the nand_legacy struct to make it clear. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-10-03mtd: rawnand: Deprecate ->{set,get}_features() hooksBoris Brezillon
Those hooks should be replaced by a proper ->exec_op() implementation. Move them to the nand_legacy struct to make it clear. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
generated by cgit (git 2.34.1) at 2025-09-16 13:13:19 +0000