| Age | Commit message (Collapse) | Author |
|---|
|
This patch adds efistub booting support, which is the standard UEFI boot
protocol for LoongArch to use.
We use generic efistub, which means we can pass boot information (i.e.,
system table, memory map, kernel command line, initrd) via a light FDT
and drop a lot of non-standard code.
We use a flat mapping to map the efi runtime in the kernel's address
space. In efi, VA = PA; in kernel, VA = PA + PAGE_OFFSET. As a result,
flat mapping is not identity mapping, SetVirtualAddressMap() is still
needed for the efi runtime.
Tested-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
[ardb: change fpic to fpie as suggested by Xi Ruoyao]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v6.1:
UAPI Changes:
Cross-subsystem Changes:
- DMA-buf: documentation updates.
- Assorted small fixes to vga16fb
- Fix fbdev drivers to use the aperture helpers.
- Make removal of conflicting drivers work correctly without fbdev enabled.
Core Changes:
- bridge, scheduler, dp-mst: Assorted small fixes.
- Add more format helpers to fourcc, and use it to replace the cpp usage.
- Add DRM_FORMAT_Cxx, DRM_FORMAT_Rxx (single channel), and DRM_FORMAT_Dxx
("darkness", inverted single channel)
- Add packed AYUV8888 and XYUV8888 formats.
- Assorted documentation updates.
- Rename ttm_bo_init to ttm_bo_init_validate.
- Allow TTM bo's to exist without backing store.
- Convert drm selftests to kunit.
- Add managed init functions for (panel) bridge, crtc, encoder and connector.
- Fix endianness handling in various format conversion helpers.
- Make tests pass on big-endian platforms, and add test for rgb888 -> rgb565
- Move DRM_PLANE_HELPER_NO_SCALING to atomic helpers and rename, so
drm_plane_helper is no longer needed in most drivers.
- Use idr_init_base instead of idr_init.
- Rename FB and GEM CMA helpers to DMA helpers.
- Rework XRGB8888 related conversion helpers, and add drm_fb_blit() that
takes a iosys_map. Make drm_fb_memcpy take an iosys_map too.
- Move edid luminance calculation to core, and use it in i915.
Driver Changes:
- bridge/{adv7511,ti-sn65dsi86,parade-ps8640}, panel/{simple,nt35510,tc358767},
nouveau, sun4i, mipi-dsi, mgag200, bochs, arm, komeda, vmwgfx, pl111:
Assorted small fixes and doc updates.
- vc4: Rework hdmi power up, and depend on PM.
- panel/simple: Add Samsung LTL101AL01.
- ingenic: Add JZ4760(B) support, avoid a modeset when sharpness property
is unchanged, and use the new PM ops.
- Revert some amdgpu commits that cause garbaged graphics when starting
X, and reapply them with the real problem fixed.
- Completely rework vc4 init to use managed helpers.
- Rename via_drv to via_dri1, and move all stuff there only used by the
dri1 implementation in preperation for atomic modeset.
- Use regmap bulk write in ssd130x.
- Power sequence and clock updates to it6505.
- Split panel-sitrox-st7701 init sequence and rework mode programming code.
- virtio: Improve error and edge conditions handling, and convert to use managed
helpers.
- Add Samsung LTL101AL01, B120XAN01.0, R140NWF5 RH, DMT028VGHMCMI-1A T, panels.
- Add generic fbdev support to komeda.
- Split mgag200 modeset handling to make it more model-specific.
- Convert simpledrm to use atomic helpers.
- Improve udl suspend/disconnect handling.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f0c71766-61e8-19b7-763a-5fbcdefc633d@linux.intel.com
|
|
Implement an API function and debugfs file to switch
active links.
Also provide an async version of the API so drivers
can call it in arbitrary contexts, e.g. while in the
authorized callback.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The A-MSDU data needs to be stored per-link and aggregated into a single
value for the station. Add a new struct ieee_80211_sta_aggregates in
order to store this data and a new function
ieee80211_sta_recalc_aggregates to update the current data for the STA.
Note that in the non MLO case the pointer in ieee80211_sta will directly
reference the data in deflink.agg, which means that recalculation may be
skipped in that case.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add macros (and an exported function) to allow checking some
link RCU protected accesses that are happening in callbacks
from mac80211 and are thus under the correct lock.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add a link_id parameter to ieee80211_nullfunc_get() to be
able to obtain a correctly addressed frame.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add a new API function ieee80211_find_sta_by_link_addrs()
that looks up the STA and link ID based on interface and
station link addresses.
We're going to use it for mac80211-hwsim to track on the
AP side which links are active.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In order to let the driver select active links and properly
make multi-link connections, as a first step isolate the
driver from inactive links, and set the active links to be
only the association link for client-side interfaces. For
AP side nothing changes since APs always have to have all
their links active.
To simplify things, update the for_each_sta_active_link()
API to include the appropriate vif pointer.
This also implies not allocating a chanctx for an inactive
link, which requires a few more changes.
Since we now no longer try to program multiple links to the
driver, remove the check in the MLME code.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The SMPS power save mode needs to be per-link rather than being shared
for all links. As such, move it into struct ieee80211_link_sta.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Merge wireless/main to get the rx.link fix, which is needed
for further work in this area.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"These are the expected fixes for the SoC tree. I have let the patches
pile up a little too long, so this is bigger than I would have liked.
- Minor build fixes for Broadcom STB and NXP i.MX8M SoCs as well\ as
TEE firmware
- Updates to the MAINTAINERS file for the PolarFire SoC
- Minor DT fixes for Renesas White Hawk and Arm Versatile and Juno
platforms
- A fix for a missing dependnecy in the NXP DPIO driver
- Broadcom BCA fixes to the newly added devicetree files
- Multiple fixes for Microchip AT91 based SoCs, dealing with
self-refresh timings and regulator settings in DT
- Several DT fixes for NXP i.MX platforms, dealing with incorrect
GPIO settings, extraneous nodes, and a wrong clock setting"
* tag 'soc-fixes-6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (45 commits)
soc: fsl: select FSL_GUTS driver for DPIO
ARM: dts: at91: sama5d2_icp: don't keep vdd_other enabled all the time
ARM: dts: at91: sama5d27_wlsom1: don't keep ldo2 enabled all the time
ARM: dts: at91: sama7g5ek: specify proper regulator output ranges
ARM: dts: at91: sama5d2_icp: specify proper regulator output ranges
ARM: dts: at91: sama5d27_wlsom1: specify proper regulator output ranges
ARM: at91: pm: fix DDR recalibration when resuming from backup and self-refresh
ARM: at91: pm: fix self-refresh for sama7g5
soc: brcmstb: pm-arm: Fix refcount leak and __iomem leak bugs
ARM: configs: at91: remove CONFIG_MICROCHIP_PIT64B
ARM: ixp4xx: fix typos in comments
arm64: dts: renesas: r8a779g0: Fix HSCIF0 interrupt number
tee: fix compiler warning in tee_shm_register()
arm64: dts: freescale: verdin-imx8mp: fix atmel_mxt_ts reset polarity
arm64: dts: freescale: verdin-imx8mm: fix atmel_mxt_ts reset polarity
arm64: dts: imx8mp: Fix I2C5 GPIO assignment on i.MX8M Plus DHCOM
arm64: dts: imx8mm-venice-gw7901: fix port/phy validation
arm64: dts: verdin-imx8mm: add otg2 pd to usbphy
soc: imx: gpcv2: Assert reset before ungating clock
arm64: dts: ls1028a-qds-65bb: don't use in-band autoneg for 2500base-x
...
|
|
connector validation
Add a helper function to validate the connector configuration received in
the encoder atomic_check by the drivers.
So the drivers don't need to do these common validations themselves.
V2: Move the format verification to a new helper at the drm_atomic_helper.c
(Thomas Zimmermann).
V3: Format check improvements (Leandro Ribeiro).
Minor improvements(Thomas Zimmermann).
V5: Fix some grammar issues in the commit message (André Almeida).
Reviewed-by: Melissa Wen <mwen@igalia.com>
Signed-off-by: Igor Torrente <igormtorrente@gmail.com>
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220905190811.25024-4-igormtorrente@gmail.com
|
|
Add new event type for tap called gesture and the direction can be used
to differentiate single and double tap. This may be used by accelerometer
sensors to express single and double tap events. For directional tap,
modifiers like IIO_MOD_(X/Y/Z) can be used along with singletap and
doubletap direction.
Signed-off-by: Jagath Jog J <jagathjog1996@gmail.com>
Link: https://lore.kernel.org/r/20220831063117.4141-2-jagathjog1996@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
If an IIO driver uses callbacks from another IIO driver and calls
iio_channel_start_all_cb() from one of its buffer setup ops, then
lockdep complains due to the lock nesting, as in the below example with
lmp91000.
Since the locks are being taken on different IIO devices, there is no
actual deadlock. Fix the warning by telling lockdep to use a different
class for each iio_device.
============================================
WARNING: possible recursive locking detected
--------------------------------------------
python3/23 is trying to acquire lock:
(&indio_dev->mlock){+.+.}-{3:3}, at: iio_update_buffers
but task is already holding lock:
(&indio_dev->mlock){+.+.}-{3:3}, at: enable_store
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&indio_dev->mlock);
lock(&indio_dev->mlock);
*** DEADLOCK ***
May be due to missing lock nesting notation
5 locks held by python3/23:
#0: (sb_writers#5){.+.+}-{0:0}, at: ksys_write
#1: (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter
#2: (kn->active#14){.+.+}-{0:0}, at: kernfs_fop_write_iter
#3: (&indio_dev->mlock){+.+.}-{3:3}, at: enable_store
#4: (&iio_dev_opaque->info_exist_lock){+.+.}-{3:3}, at: iio_update_buffers
Call Trace:
__mutex_lock
iio_update_buffers
iio_channel_start_all_cb
lmp91000_buffer_postenable
__iio_update_buffers
enable_store
Fixes: 67e17300dc1d76 ("iio: potentiostat: add LMP91000 support")
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220829091840.2791846-1-vincent.whitchurch@axis.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
pci_ids.h
There are already three places in kernel which define
PCI_VENDOR_ID_MICROSOFT and two for PCI_DEVICE_ID_HYPERV_VIDEO and
there's a need to use these from core VMBus code. Move the defines where
they belong.
No functional change.
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # pci_ids.h
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20220827130345.1320254-2-vkuznets@redhat.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Remove the CONFIG_PREEMPT_RT symbol from the ifdef around
do_softirq_own_stack() and move it to Kconfig instead.
Enable softirq stacks based on SOFTIRQ_ON_OWN_STACK which depends on
HAVE_SOFTIRQ_ON_OWN_STACK and its default value is set to !PREEMPT_RT.
This ensures that softirq stacks are not used on PREEMPT_RT and avoids
a 'select' statement on an option which has a 'depends' statement.
Link: https://lore.kernel.org/YvN5E%2FPrHfUhggr7@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add new helper function to allow for splitting specified user string
into a sequence of integers. Internally it makes use of get_options() so
the returned sequence contains the integers extracted plus an additional
element that begins the sequence and specifies the integers count.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20220904102840.862395-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
User space might be creating and destroying a lot of hash maps. Synchronous
rcu_barrier-s in a destruction path of hash map delay freeing of hash buckets
and other map memory and may cause artificial OOM situation under stress.
Optimize rcu_barrier usage between bpf hash map and bpf_mem_alloc:
- remove rcu_barrier from hash map, since htab doesn't use call_rcu
directly and there are no callback to wait for.
- bpf_mem_alloc has call_rcu_in_progress flag that indicates pending callbacks.
Use it to avoid barriers in fast path.
- When barriers are needed copy bpf_mem_alloc into temp structure
and wait for rcu barrier-s in the worker to let the rest of
hash map freeing to proceed.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220902211058.60789-17-alexei.starovoitov@gmail.com
|
|
Extend bpf_mem_alloc to cache free list of fixed size per-cpu allocations.
Once such cache is created bpf_mem_cache_alloc() will return per-cpu objects.
bpf_mem_cache_free() will free them back into global per-cpu pool after
observing RCU grace period.
per-cpu flavor of bpf_mem_alloc is going to be used by per-cpu hash maps.
The free list cache consists of tuples { llist_node, per-cpu pointer }
Unlike alloc_percpu() that returns per-cpu pointer
the bpf_mem_cache_alloc() returns a pointer to per-cpu pointer and
bpf_mem_cache_free() expects to receive it back.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220902211058.60789-11-alexei.starovoitov@gmail.com
|
|
Tracing BPF programs can attach to kprobe and fentry. Hence they
run in unknown context where calling plain kmalloc() might not be safe.
Front-end kmalloc() with minimal per-cpu cache of free elements.
Refill this cache asynchronously from irq_work.
BPF programs always run with migration disabled.
It's safe to allocate from cache of the current cpu with irqs disabled.
Free-ing is always done into bucket of the current cpu as well.
irq_work trims extra free elements from buckets with kfree
and refills them with kmalloc, so global kmalloc logic takes care
of freeing objects allocated by one cpu and freed on another.
struct bpf_mem_alloc supports two modes:
- When size != 0 create kmem_cache and bpf_mem_cache for each cpu.
This is typical bpf hash map use case when all elements have equal size.
- When size == 0 allocate 11 bpf_mem_cache-s for each cpu, then rely on
kmalloc/kfree. Max allocation size is 4096 in this case.
This is bpf_dynptr and bpf_kptr use case.
bpf_mem_alloc/bpf_mem_free are bpf specific 'wrappers' of kmalloc/kfree.
bpf_mem_cache_alloc/bpf_mem_cache_free are 'wrappers' of kmem_cache_alloc/kmem_cache_free.
The allocators are NMI-safe from bpf programs only. They are not NMI-safe in general.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220902211058.60789-2-alexei.starovoitov@gmail.com
|
|
Add 1000BASE-KX interface mode. This 1G backplane ethernet as described in
clause 70. Clause 73 autonegotiation is mandatory, and only full duplex
operation is supported.
Although at the PMA level this interface mode is identical to
1000BASE-X, it uses a different form of in-band autonegation. This
justifies a separate interface mode, since the interface mode (along
with the MLO_AN_* autonegotiation mode) sets the type of autonegotiation
which will be used on a link. This results in more than just electrical
differences between the link modes.
With regard to 1000BASE-X, 1000BASE-KX holds a similar position to
SGMII: same signaling, but different autonegotiation. PCS drivers
(which typically handle in-band autonegotiation) may only support
1000BASE-X, and not 1000BASE-KX. Similarly, the phy mode is used to
configure serdes phys with phy_set_mode_ext. Due to the different
electrical standards (SFI or XFI vs Clause 70), they will likely want to
use different configuration. Adding a phy interface mode for
1000BASE-KX helps simplify configuration in these areas.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This adds a function to update a CGR with new parameters. qman_create_cgr
can almost be used for this (with flags=0), but it's not suitable because
it also registers the callback function. The _safe variant was modeled off
of qman_cgr_delete_safe. However, we handle multiple arguments and a return
value.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Acked-by: Camelia Groza <camelia.groza@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Perform merge of Mellanox shared branch.
* mlx5-next:
RDMA/mlx5: Move function mlx5_core_query_ib_ppcnt() to mlx5_ib
|
|
This patch doesn't change any functionality, but move one function
to mlx5_ib because it is not used by mlx5_core.
The actual fix is in the next patch.
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Chris Mi <cmi@nvidia.com>
Link: https://lore.kernel.org/r/fd47b9138412bd94ed30f838026cbb4cf3878150.1661763871.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
When the RDMA auxiliary driver probes, it sets its profile based on
devlink driverinit value. The latter might not be in sync with FW yet
(In case devlink reload is not performed), thus causing a mismatch
between RDMA driver and FW. This results in the following FW syndrome
when the RDMA driver tries to adjust RoCE state, which fails the probe:
"0xC1F678 | modify_nic_vport_context: roce_en set on a vport that
doesn't support roce"
To prevent this, select the PF profile based on FW RoCE capability
instead of relying on devlink driverinit value.
To provide backward compatibility of the RoCE disable feature, on older
FW's where roce_rw is not set (FW RoCE capability is read-only), keep
the current behavior e.g., rely on devlink driverinit value.
Fixes: fbfa97b4d79f ("net/mlx5: Disable roce at HCA level")
Reviewed-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Link: https://lore.kernel.org/r/cb34ce9a1df4a24c135cb804db87f7d2418bd6cc.1661763459.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
There is a very common pattern of using
debugfs_remove(debufs_lookup(..)) which results in a dentry leak of the
dentry that was looked up. Instead of having to open-code the correct
pattern of calling dput() on the dentry, create
debugfs_lookup_and_remove() to handle this pattern automatically and
properly without any memory leaks.
Cc: stable <stable@kernel.org>
Reported-by: Kuyo Chang <kuyo.chang@mediatek.com>
Tested-by: Kuyo Chang <kuyo.chang@mediatek.com>
Link: https://lore.kernel.org/r/YxIaQ8cSinDR881k@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add power-domain header for RV1126 SoC from description in TRM.
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Jagan Teki <jagan@edgeble.ai>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220818124132.125304-2-jagan@edgeble.ai
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The Altera Triple Speed Ethernet has a SGMII/1000BaseC PCS that can be
integrated in several ways. It can either be part of the TSE MAC's
address space, accessed through 32 bits accesses on the mapped mdio
device 0, or through a dedicated 16 bits register set.
This driver allows using the TSE PCS outside of altera TSE's driver,
since it can be used standalone by other MACs.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Immutable backlight-detect-refactor branch between acpi, drm-* and pdx86
Tag (immutable branch) with v6.0-rc1 + the (acpi/x86) backlight
detect refactor work. For merging into the acpi, drm-* and pdx86
subsystems.
|
|
As reported by Nathan, the module_init() macro was not taken into
account because the header was missing. That means spe_mathemu_init()
was never called.
This should have been detected by gcc at build time, but due to
'-w' flag it went undetected.
Removing that flag leads to many warnings hence errors.
Fix those warnings then remove the -w flag.
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/2663961738a46073713786d4efeb53100ca156e7.1662134272.git.christophe.leroy@csgroup.eu
|
|
We need the USB fixes in here and this resolves the merge issue in:
drivers/usb/dwc3/gadget.c
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the tty/serial fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There are no external users of fwnode_get_named_gpiod() anymore, so
let's stop exporting it and mark it as static.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
|
|
For the sake of integrity, include headers we are direct user of.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220713172235.22611-4-andriy.shevchenko@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
RK3568 supports PCIe v3 using not Combphy like PCIe v2 on rk3566.
It use a dedicated PCIe-phy. Add support for this.
Initial support by Shawn Lin, modifications by Peter Geis and Frank
Wunderlich.
Add data-lanes property for splitting pcie-lanes across controllers.
The data-lanes is an array where x=0 means lane is disabled and x > 0
means controller x is assigned to phy lane.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Suggested-by: Peter Geis <pgwipeout@gmail.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
Link: https://lore.kernel.org/r/20220825193836.54262-4-linux@fw-web.de
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
This reverts commit 16ede66973c84f890c03584f79158dd5b2d725f5.
This is causing issues with CPU stalls on my test box, revert it for
now until we understand what is going on. It looks like infinite
looping off sbitmap_queue_wake_up(), but hard to tell with a lot of
CPUs hitting this issue and the console scrolling infinitely.
Link: https://lore.kernel.org/linux-block/e742813b-ce5c-0d58-205b-1626f639b1bd@kernel.dk/
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Similar to HDMI, DP uses audio infoframes as well which are structured
very similar to the HDMI ones.
This patch adds a helper function to pack the HDMI audio infoframe for
DP, called hdmi_audio_infoframe_pack_for_dp().
hdmi_audio_infoframe_pack_only() is split into two parts. One of them
packs the payload only and can be used for HDMI and DP.
Also constify the frame parameter in hdmi_audio_infoframe_check() as
it is passed to hdmi_audio_infoframe_check_only() which expects a const.
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
Signed-off-by: Bo-Chen Chen <rex-bc.chen@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220901044149.16782-3-rex-bc.chen@mediatek.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Johannes Berg says:
====================
drivers
- rtw89: large update across the map, e.g. coex, pci(e), etc.
- ath9k: uninit memory read fix
- ath10k: small peer map fix and a WCN3990 device fix
- wfx: underflow
stack
- the "change MAC address while IFF_UP" change from James
we discussed
- more MLO work, including a set of fixes for the previous
code, now that we have more code we can exercise it more
- prevent some features with MLO that aren't ready yet
(AP_VLAN and 4-address connections)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes berg says:
====================
We have a handful of fixes:
- fix DMA from stack in wilc1000 driver
- fix crash on chip reset failure in mt7921e
- fix for the reported warning on aggregation timer expiry
- check packet lengths in hwsim virtio paths
- fix compiler warnings/errors with AAD construction by
using struct_group
- fix Intel 4965 driver rate scale operation
- release channel contexts correctly in mac80211 mlme code
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty/serial/vt driver fixes for 6.0-rc4 that
resolve a number of reported issues:
- n_gsm fixups for previous changes that caused problems
- much-reported serdev crash fix that showed up in 6.0-rc1
- vt font selection bugfix
- kerneldoc build warning fixes
- other tiny serial core fixes
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: n_gsm: avoid call of sleeping functions from atomic context
tty: n_gsm: replace kicktimer with delayed_work
tty: n_gsm: initialize more members at gsm_alloc_mux()
tty: n_gsm: add sanity check for gsm->receive in gsm_receive_buf()
tty: serial: atmel: Preserve previous USART mode if RS485 disabled
tty: serial: lpuart: disable flow control while waiting for the transmit engine to complete
tty: Fix lookahead_buf crash with serdev
serial: fsl_lpuart: RS485 RTS polariy is inverse
vt: Clear selection before changing the font
serial: document start_rx member at struct uart_ops
|
|
Add an MLD address attribute to BSS entries that the interface
is currently associated with to help userspace figure out what's
going on.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add a new extended feature bit signifying that the wireless hardware
supports changing the MAC address while the underlying net_device is
powered. Note that this has a different meaning from
IFF_LIVE_ADDR_CHANGE as additional restrictions might be imposed by
the hardware, such as:
- No connection is active on this interface, carrier is off
- No scan is in progress
- No offchannel operations are in progress
Signed-off-by: James Prestwood <prestwoj@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We sometimes copy all the addresses from the 802.11 header
for the AAD, which may cause complaints from fortify checks.
Use struct_group() to avoid the compiler warnings/errors.
Change-Id: Ic3ea389105e7813b22095b295079eecdabde5045
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
acpi_video_set_dmi_backlight_type() is troublesome because it may end
up getting called after other backlight drivers have already called
acpi_video_get_backlight_type() resulting in the other drivers
already being registered even though they should not.
In case of the acpi_video backlight, acpi_video_set_dmi_backlight_type()
actually calls acpi_video_unregister_backlight() since that is often
probed earlier, leading to userspace seeing the acpi_video0 class
device being briefly available, leading to races in userspace where
udev probe-rules try to access the device and it is already gone.
All callers have been fixed to no longer call it, so remove
acpi_video_set_dmi_backlight_type() now.
This means we now also no longer need acpi_video_unregister_backlight()
for the remove acpi_video backlight after it was wrongly registered hack,
so remove that too.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
On Apple laptops with an Apple GMUX using this for brightness control,
should take precedence of any other brightness control methods.
Add apple-gmux detection to acpi_video_get_backlight_type() using
the already existing apple_gmux_present() helper function.
This will allow removig the (ab)use of:
acpi_video_set_dmi_backlight_type(acpi_backlight_vendor);
Inside the apple-gmux driver.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
On some new laptop designs a new Nvidia specific WMI interface is present
which gives info about panel brightness control and may allow controlling
the brightness through this interface when the embedded controller is used
for brightness control.
When this WMI interface is present and indicates that the EC is used,
then this interface should be used for brightness control.
Changes in v2:
- Use the new shared nvidia-wmi-ec-backlight.h header for the
WMI firmware API definitions
- ACPI_VIDEO can now be enabled on non X86 too,
adjust the Kconfig changes to match this.
Changes in v3:
- Use WMI_BRIGHTNESS_GUID define
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Daniel Dadap <ddadap@nvidia.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
header (v2)
Move the WMI interface definitions to a header, so that the definitions
can be shared with drivers/acpi/video_detect.c .
Changes in v2:
- Add missing Nvidia copyright header
- Move WMI_BRIGHTNESS_GUID to nvidia-wmi-ec-backlight.h as well
Suggested-by: Daniel Dadap <ddadap@nvidia.com>
Reviewed-by: Daniel Dadap <ddadap@nvidia.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
|
|
We now have a cleaner way to keep compatibility with user-space
(a.k.a. not breaking it) when we need to keep in place a one-element
array (for its use in user-space) together with a flexible-array
member (for its use in kernel-space) without making it hard to read
at the source level. This is through the use of the new
__DECLARE_FLEX_ARRAY() helper macro.
The size and memory layout of the structure is preserved after the
changes. See below.
Before changes:
$ pahole -C ip_msfilter net/ipv4/igmp.o
struct ip_msfilter {
union {
struct {
__be32 imsf_multiaddr_aux; /* 0 4 */
__be32 imsf_interface_aux; /* 4 4 */
__u32 imsf_fmode_aux; /* 8 4 */
__u32 imsf_numsrc_aux; /* 12 4 */
__be32 imsf_slist[1]; /* 16 4 */
}; /* 0 20 */
struct {
__be32 imsf_multiaddr; /* 0 4 */
__be32 imsf_interface; /* 4 4 */
__u32 imsf_fmode; /* 8 4 */
__u32 imsf_numsrc; /* 12 4 */
__be32 imsf_slist_flex[0]; /* 16 0 */
}; /* 0 16 */
}; /* 0 20 */
/* size: 20, cachelines: 1, members: 1 */
/* last cacheline: 20 bytes */
};
After changes:
$ pahole -C ip_msfilter net/ipv4/igmp.o
struct ip_msfilter {
__be32 imsf_multiaddr; /* 0 4 */
__be32 imsf_interface; /* 4 4 */
__u32 imsf_fmode; /* 8 4 */
__u32 imsf_numsrc; /* 12 4 */
union {
__be32 imsf_slist[1]; /* 16 4 */
struct {
struct {
} __empty_imsf_slist_flex; /* 16 0 */
__be32 imsf_slist_flex[0]; /* 16 0 */
}; /* 16 0 */
}; /* 16 4 */
/* size: 20, cachelines: 1, members: 5 */
/* last cacheline: 20 bytes */
};
In the past, we had to duplicate the whole original structure within
a union, and update the names of all the members. Now, we just need to
declare the flexible-array member to be used in kernel-space through
the __DECLARE_FLEX_ARRAY() helper together with the one-element array,
within a union. This makes the source code more clean and easier to read.
Link: https://github.com/KSPP/linux/issues/193
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch changes bpf_getsockopt(SOL_IPV6) to reuse
do_ipv6_getsockopt(). It removes the duplicated code from
bpf_getsockopt(SOL_IPV6).
This also makes bpf_getsockopt(SOL_IPV6) supporting the same
set of optnames as in bpf_setsockopt(SOL_IPV6). In particular,
this adds IPV6_AUTOFLOWLABEL support to bpf_getsockopt(SOL_IPV6).
ipv6 could be compiled as a module. Like how other code solved it
with stubs in ipv6_stubs.h, this patch adds the do_ipv6_getsockopt
to the ipv6_bpf_stub.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20220902002931.2896218-1-kafai@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
This patch changes bpf_getsockopt(SOL_IP) to reuse
do_ip_getsockopt() and remove the duplicated code.
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20220902002925.2895416-1-kafai@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
