| Age | Commit message (Collapse) | Author |
|---|
|
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
Second set of IIO new device support, features and cleanup for the 6.1 cycle.
Normal mixed bag of new device support with continuing trend that most new
devices are supported by extending existing drivers - a positive sign perhaps
that device manufacturers have somewhat stabilized their interfaces across
product generations. The BNO055 driver was however a substantial addition
including several additions to the IIO core.
There are a number of significant patch sets under review, so if the 6.0
cycle runs long I may send a 3rd pull request.
New device support
* adi,adxl313
- Support for the ADXL312 and ADXL314 accelerometers.
* bosch,bmp280
- Support for the BMP380 family of pressures sensors.
Included considerable refactoring and modernization of the bmp280
driver.
* bosch,bno055
- New driver for this i2c/serial attached complex IMU.
* lltc,ltc2497
- Support for the LTC2499 16 channel, 24bit ADC.
* st,pressure
- Support for the LPS22DF pressure sensor
* st,lsm6dsx
- Support for the LSM6DSTX (Mainly adding the ID and WAI)
Features
* core - to support the bosch,bno055 requirements
- Support for linear acceleration channel type (effect of gravity removed)
- Pitch, yaw and roll modifiers for angle channels.
- Standard serialnumber attribute documentation.
- Binary attributes - to allow for calibration save and restore.
* adi,ad7923
- Support extended range (wider supported input voltage range).
* bosch,bmp280
- Add filter controls for some supported parts.
* microchip,mcp3911
- Buffered capture support for this ADC.
- Data ready interrupt support, including hiz control for line.
- Oversampling ratio support.
* st,stm32-adc
- Support ID registers on parts where they are present, providing
discoverability of some features.
Fixes - late breaking fixes that I judged could wait for the merge window.
* adi,ad5593r
- Add a missing STOP condition between address write and data read.
- Check for related i2c functionality.
* adi,ad7923
- Fix shift reporting for some variants supported by the driver.
* infinion,dps310
- Work around a hardware issue where a chip can hang by adding a
timeout and reset path.
Cleanups
* Continuing work to switch to new pm macros.
* MAINTAINERS
- Drop duplication of wild card covered entry in ADI block and
add missing entries to cover ltc294x binding files.
* bosch,bma400
- Fix trivial smatch warning.
* bosch,bmp280
- Fix broken links to datasheets
* lltc,ltc2497
- Fix missing entry for ltc2499
* mexelis,mlx90614
- Switch to get_avail() callback for _available attributes.
* microchip,mcp3911
- Move to devm_ resource management for all elements of probe()
* tag 'iio-for-6.1b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (57 commits)
iio: adc: mcp3911: add support for oversampling ratio
dt-bindings: iio: adc: mcp3911: add microchip,data-ready-hiz entry
iio: adc: mcp3911: add support for interrupts
iio: adc: mcp3911: add support for buffers
iio: adc: mcp3911: use resource-managed version of iio_device_register
iio: accel: bma400: Fix smatch warning based on use of unintialized value.
iio: light: st_uvis25: Use EXPORT_NS_SIMPLE_DEV_PM_OPS()
iio: accel: bmi088: Use EXPORT_NS_GPL_RUNTIME_DEV_PM_OPS() and pm_ptr()
iio: proximity: srf04: Use pm_ptr() to remove unused struct dev_pm_ops
iio: proximity: sx9360: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
iio: proximity: sx9324: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
iio: proximity: sx9310: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
docs: iio: add documentation for BNO055 driver
iio: imu: add BNO055 I2C driver
iio: imu: add BNO055 serdev driver
dt-bindings: iio/imu: Add Bosch BNO055
iio: document "serialnumber" sysfs attribute
iio: document bno055 private sysfs attributes
iio: imu: add Bosch Sensortec BNO055 core driver
iio: add support for binary attributes
...
|
|
At present, the tps68470.c only supports a single clock consumer when
passing platform data to the clock driver. In some devices multiple
sensors depend on the clock provided by a single TPS68470 and so all
need to be able to acquire the clock. Support passing multiple
consumers as platform data.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add a helper macro to iterate over ACPI devices that are flagged
as consumers of an initial supplier ACPI device.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In commit b83e2b306736 ("ACPI: scan: Add function to fetch dependent
of ACPI device") we added a means of fetching the first device to
declare itself dependent on another ACPI device in the _DEP method.
One assumption in that patch was that there would only be a single
consuming device, but this has not held.
Replace that function with a new function that fetches the next consumer
of a supplier device. Where no "previous" consumer is passed in, it
behaves identically to the original function.
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Daniel Scally <djrscally@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
PCC regions utilize a mailbox to set/retrieve register values used by
the CPPC code. This is fine as long as the operations are
infrequent. With the FIE code enabled though the overhead can range
from 2-11% of system CPU overhead (ex: as measured by top) on Arm
based machines.
So, before enabling FIE assure none of the registers used by
cppc_get_perf_ctrs() are in the PCC region. Finally, add a module
parameter which can override the PCC region detection at boot or
module reload.
Signed-off-by: Jeremy Linton <jeremy.linton@arm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Ionela Voinescu <ionela.voinescu@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Use _DMA defined in ACPI spec for translation between
DMA address and CPU address, and implement acpi_arch_dma_setup
for initializing dev->dma_range_map, where acpi_dma_get_range
is called for parsing _DMA.
e.g.
If we have two dma ranges:
cpu address dma address size offset
0x200080000000 0x2080000000 0x400000000 0x1fe000000000
0x400080000000 0x4080000000 0x400000000 0x3fc000000000
_DMA for pci devices should be declared in host bridge as
flowing:
Name (_DMA, ResourceTemplate() {
QWordMemory (ResourceProducer,
PosDecode,
MinFixed,
MaxFixed,
NonCacheable,
ReadWrite,
0x0,
0x4080000000,
0x447fffffff,
0x3fc000000000,
0x400000000,
,
,
)
QWordMemory (ResourceProducer,
PosDecode,
MinFixed,
MaxFixed,
NonCacheable,
ReadWrite,
0x0,
0x2080000000,
0x247fffffff,
0x1fe000000000,
0x400000000,
,
,
)
})
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
In DT systems configurations, of_dma_get_range() returns struct
bus_dma_region DMA regions; they are used to set-up devices
DMA windows with different offset available for translation between DMA
address and CPU address.
In ACPI systems configuration, acpi_dma_get_range() does not return
DMA regions yet and that precludes setting up the dev->dma_range_map
pointer and therefore DMA regions with multiple offsets.
Update acpi_dma_get_range() to return struct bus_dma_region
DMA regions like of_dma_get_range() does.
After updating acpi_dma_get_range(), acpi_arch_dma_setup() is changed for
ARM64, where the original dma_addr and size are removed as these
arguments are now redundant, and pass 0 and U64_MAX for dma_base
and size of arch_setup_dma_ops; this is a simplification consistent
with what other ACPI architectures also pass to iommu_setup_dma_ops().
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Jianmin Lv <lvjianmin@loongson.cn>
Reviewed-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small, and late, serial driver fixes for 6.0-rc7 to
resolve some reported problems.
Included in here are:
- tegra icount accounting fixes, including a framework function that
other drivers will be converted over to using in 6.1-rc1.
- fsl_lpuart reset bugfix
- 8250 omap 485 bugfix
- sifive serial clock bugfix
The last three patches have not shown up in linux-next due to them
being added to my tree only 2 days ago, but they are tiny and
self-contained and the developers say they resolve issues that they
have with 6.0-rc. The other three have been in linux-next for a while
with no reported issues"
* tag 'tty-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: sifive: enable clocks for UART when probed
serial: 8250: omap: Use serial8250_em485_supported
serial: fsl_lpuart: Reset prior to registration
serial: tegra-tcu: Use uart_xmit_advance(), fixes icount.tx accounting
serial: tegra: Use uart_xmit_advance(), fixes icount.tx accounting
serial: Create uart_xmit_advance()
|
|
Add const qualifier to the device_get_match_data() parameter.
Some of the future users may utilize this function without
forcing the type.
All the same, dev_fwnode() may be used with a const qualifier.
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220922135410.49694-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
upgrade the callchain to drm_dbg() and drm_dev_dbg(); add a struct
_ddebug ptr parameter to them, and supply that additional param by
replacing the '_no_desc' flavor of dyndbg Factory macro currently used
with the flavor that supplies the descriptor.
NOTES:
The descriptor gives these fns access to the decorator flags, but they
do none of the dynamic-prefixing done by dynamic_emit_prefix(), which
is currently static.
DRM already has conventions for logging/messaging; just tossing
optional decorations on top probably wouldn't help. Instead, existing
flags (or new ones, perhaps 'sd' ala lspci) can be used to make
current message conventions optional. This suggests a new
drmdbg_prefix_emit() to handle prefixing locally.
For CONFIG_DRM_USE_DYNAMIC_DEBUG=N, just pass null descriptor.
desc->class_id is redundant with category parameter, but its
availability is dependent on desc.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220912052852.1123868-10-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When CONFIG_DRM_USE_DYNAMIC_DEBUG=y, the drm.debug API (a macro stack,
calling _+drm_*dbg() eventually) invokes a dyndbg Factory macro to
create a descriptor for each callsite, thus making them individually
>control-able.
In this case, the calls to _drm_*dbg are unreachable unless the
callsite is enabled. So those calls can short-circuit their early
do-nothing returns. Provide and use __drm_debug_enabled(), to do this
when config'd, or the _raw flags-check otherwize.
And since dyndbg is in use, lets also instrument the remaining users
of drm_debug_enabled, by wrapping the _raw in a macro with a:
pr_debug("todo: is this frequent enough to optimize ?\n");
For CONFIG_DRM_USE_DYNAMIC_DEBUG=n, do no site instrumenting at all,
since JUMP_LABEL might be off, and we don't want to make work.
With drm, amdgpu, i915, nouveau loaded, heres remaining uses of
drm_debug_enabled(), which costs ~1.5kb data to control the
pr_debug("todo:..")s.
Some of those uses might be ok to use __drm_debug_enabled() by
inspection, others might warrant conversion to use dyndbg Factory
macros, and that would want callrate data to estimate the savings
possible. TBH, any remaining savings are probably small; drm.debug
covers the vast bulk of the uses. Maybe "vblank" is the exception.
:#> grep todo /proc/dynamic_debug/control | wc
21 168 2357
:#> grep todo /proc/dynamic_debug/control
drivers/gpu/drm/drm_edid_load.c:178 [drm]edid_load =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/drm_vblank.c:410 [drm]drm_crtc_accurate_vblank_count =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/drm_vblank.c:787 [drm]drm_crtc_vblank_helper_get_vblank_timestamp_internal =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/drm_vblank.c:1491 [drm]drm_vblank_restore =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/drm_vblank.c:1433 [drm]drm_vblank_enable =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/drm_plane.c:2168 [drm]drm_mode_setplane =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/display/drm_dp_mst_topology.c:1359 [drm_display_helper]drm_dp_mst_wait_tx_reply =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/display/drm_dp_mst_topology.c:2864 [drm_display_helper]process_single_tx_qlock =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/display/drm_dp_mst_topology.c:2909 [drm_display_helper]drm_dp_queue_down_tx =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/display/drm_dp_mst_topology.c:1686 [drm_display_helper]drm_dp_mst_update_slots =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/i915/display/intel_dp.c:1111 [i915]intel_dp_print_rates =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/i915/display/intel_backlight.c:5434 [i915]cnp_enable_backlight =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/i915/display/intel_backlight.c:5459 [i915]intel_backlight_device_register =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/i915/display/intel_opregion.c:43 [i915]intel_opregion_notify_encoder =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/i915/display/intel_opregion.c:53 [i915]asle_set_backlight =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/i915/display/intel_bios.c:1088 [i915]intel_bios_is_dsi_present =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/i915/display/intel_display_debugfs.c:6153 [i915]i915_drrs_ctl_set =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/i915/intel_pcode.c:26 [i915]snb_pcode_read =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/i915/i915_getparam.c:785 [i915]i915_getparam_ioctl =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/amd/amdgpu/vcn_v2_5.c:282 [amdgpu]vcn_v2_5_process_interrupt =_ "todo: maybe avoid via dyndbg\n"
drivers/gpu/drm/amd/amdgpu/vcn_v2_0.c:433 [amdgpu]vcn_v2_0_process_interrupt =_ "todo: maybe avoid via dyndbg\n"
:#>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220912052852.1123868-8-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
drm_print defines all of these:
drm_dbg_{core,kms,prime,atomic,vbl,lease,_dp,_drmres}
but not drm_dbg_driver itself, since it was the original drm_dbg.
To improve namespace symmetry, change the drm_dbg defn to
drm_dbg_driver, and redef grandfathered name to symmetric one.
This will help with nouveau, which uses its own stack of macros to
construct calls to dev_info, dev_dbg, etc, for which adaptation means
drm_dbg_##driver constructs.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220912052852.1123868-7-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
lkp robot told me:
>> drivers/gpu/drm/drm_ioc32.c:989:2:
error: call to undeclared function '_dynamic_func_call_cls';
ISO C99 and later do not support implicit function declarations
[-Wimplicit-function-declaration]
DRM_DEBUG("comm=\"%s\", pid=%d, dev=0x%lx, auth=%d, %s\n",
Since that macro is defined in drm_print.h, and under DRM_USE_DYN*=y
configs, invokes dyndbg-factory macros, include dynamic_debug.h from
there too, so that those configs have the definitions of all the
macros in the callchain.
This is done as a separate patch mostly to see how lkp sorts it.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220912052852.1123868-6-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
For CONFIG_DRM_USE_DYNAMIC_DEBUG=y, wrap __drm_dbg() & __drm_dev_dbg()
in one of dyndbg's Factory macros: _dynamic_func_call_no_desc().
This adds the callsite descriptor into the code, and an entry for each
into /proc/dynamic_debug/control.
#> echo class DRM_UT_ATOMIC +p > /proc/dynamic_debug/control
CONFIG_DRM_USE_DYNAMIC_DEBUG=y/n is configurable because of the .data
footprint cost of per-callsite control; 56 bytes/site * ~2k for i915,
~4k callsites for amdgpu. This is large enough that a kernel builder
might not want it.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220912052852.1123868-5-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
change drm_dev_dbg & drm_dbg to macros, which forward to the renamed
functions (with __ prefix added).
Those functions sit below the categorized layer of macros implementing
the DRM debug.category API, and implement most of it. These are good
places to insert dynamic-debug jump-label mechanics, which will allow
DRM to avoid the runtime cost of drm_debug_enabled().
no functional changes.
memory cost baseline: (unchanged)
bash-5.1# drms_load
[ 9.220389] dyndbg: 1 debug prints in module drm
[ 9.224426] ACPI: bus type drm_connector registered
[ 9.302192] dyndbg: 2 debug prints in module ttm
[ 9.305033] dyndbg: 8 debug prints in module video
[ 9.627563] dyndbg: 127 debug prints in module i915
[ 9.721505] AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
[ 10.091345] dyndbg: 2196 debug prints in module amdgpu
[ 10.106589] [drm] amdgpu kernel modesetting enabled.
[ 10.107270] amdgpu: CRAT table not found
[ 10.107926] amdgpu: Virtual CRAT table created for CPU
[ 10.108398] amdgpu: Topology: Add CPU node
[ 10.168507] dyndbg: 3 debug prints in module wmi
[ 10.329587] dyndbg: 3 debug prints in module nouveau
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220912052852.1123868-4-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use DECLARE_DYNDBG_CLASSMAP across DRM:
- in .c files, since macro defines/initializes a record
- in drivers, $mod_{drv,drm,param}.c
ie where param setup is done, since a classmap is param related
- in drm/drm_print.c
since existing __drm_debug param is defined there,
and we ifdef it, and provide an elaborated alternative.
- in drm_*_helper modules:
dp/drm_dp - 1st item in makefile target
drivers/gpu/drm/drm_crtc_helper.c - random pick iirc.
Since these modules all use identical CLASSMAP declarations (ie: names
and .class_id's) they will all respond together to "class DRM_UT_*"
query-commands:
:#> echo class DRM_UT_KMS +p > /proc/dynamic_debug/control
NOTES:
This changes __drm_debug from int to ulong, so BIT() is usable on it.
DRM's enum drm_debug_category values need to sync with the index of
their respective class-names here. Then .class_id == category, and
dyndbg's class FOO mechanisms will enable drm_dbg(DRM_UT_KMS, ...).
Though DRM needs consistent categories across all modules, thats not
generally needed; modules X and Y could define FOO differently (ie a
different NAME => class_id mapping), changes are made according to
each module's private class-map.
No callsites are actually selected by this patch, since none are
class'd yet.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220912052852.1123868-3-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
enum drm_debug_category has 10 categories, but is initialized with
bitmasks which require 10 bits of underlying storage. By using
natural enumeration, and moving the BIT(cat) into drm_debug_enabled(),
the enum fits in 4 bits, allowing the category to be represented
directly in pr_debug callsites, via the ddebug.class_id field.
While this slightly pessimizes the bit-test in drm_debug_enabled(),
using dyndbg with JUMP_LABEL will avoid the function entirely.
NOTE: this change forecloses the possibility of doing:
drm_dbg(DRM_UT_CORE|DRM_UT_KMS, "weird 2-cat experiment")
but thats already strongly implied by the use of the enum itself; its
not a normal enum if it can be 2 values simultaneously.
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220912052852.1123868-2-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
MTD subsystem API allows interacting with MTD devices (e.g. reading,
writing, handling bad blocks). So far a random driver could get MTD
device only by its name (get_mtd_device_nm()). This change allows
getting them also by a DT node.
This API is required for drivers handling DT defined MTD partitions in a
specific way (e.g. U-Boot (sub)partition with environment variables).
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220916122100.170016-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The last user was removed in 5.1 in
commit 08300f4402ab ("a.out: remove core dumping support")
but this is part of the UAPI headers, so this may want to either wait
until a.out is removed entirely, or be removed from the magic number doc
and silently remain in the header
A cursory glance on DCS didn't show any user code actually using this
value
Found with
grep MAGIC Documentation/process/magic-number.rst | while read -r mag _;
do git grep -wF "$mag" | grep -ve '^Documentation.*magic-number.rst:' \
-qe ':#define '"$mag" || git grep -wF "$mag" | while IFS=: read -r f _;
do sed -i '/\b'"$mag"'\b/d' "$f"; done ; done
Signed-off-by: Ahelenia Ziemiańska <nabijaczleweli@nabijaczleweli.xyz>
Link: https://lore.kernel.org/r/9cbea062df7125ef43e2e0b2a67ede6ad1c5f27e.1663280877.git.nabijaczleweli@nabijaczleweli.xyz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core") driver-core-next
This merges the driver core changes in 6.0-rc7 into driver-core-next as
they are needed here as well for testing.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
It renames aria to aria_generic and exports some functions such as
aria_set_key(), aria_encrypt(), and aria_decrypt() to be able to be
used by aria-avx implementation.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This is basically equivalent to the FUSE_CREATE operation which creates and
opens a regular file.
Add a new FUSE_TMPFILE operation, otherwise just reuse the protocol and the
code for FUSE_CREATE.
Acked-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
This is in preparation for adding tmpfile support to fuse, which requires
that the tmpfile creation and opening are done as a single operation.
Replace the 'struct dentry *' argument of i_op->tmpfile with
'struct file *'.
Call finish_open_simple() as the last thing in ->tmpfile() instances (may
be omitted in the error case).
Change d_tmpfile() argument to 'struct file *' as well to make callers more
readable.
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
Create a helper finish_open_simple() that opens the file with the original
dentry. Handle the error case here as well to simplify callers.
Call this helper right after ->tmpfile() is called.
Next patch will change the tmpfile API and move this call into tmpfile
instances.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
No callers outside of fs/namei.c anymore.
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
This helper unifies tmpfile creation with opening.
Existing vfs_tmpfile() callers outside of fs/namei.c will be converted to
using this helper. There are two such callers: cachefile and overlayfs.
The cachefiles code currently uses the open_with_fake_path() helper to open
the tmpfile, presumably to disable accounting of the open file. Overlayfs
uses tmpfile for copy_up, which means these struct file instances will be
short lived, hence it doesn't really matter if they are accounted or not.
Disable accounting in this helper too, which should be okay for both
callers.
Add MAY_OPEN permission checking for consistency. Like for create(2)
read/write permissions are not checked.
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
|
|
START_USER_RECOVERY and END_USER_RECOVERY are two new control commands
to support user recovery feature.
After a crash, user should send START_USER_RECOVERY, it will:
(1) check if (a)current ublk_device is UBLK_S_DEV_QUIESCED which was
set by quiesce_work and (b)chardev is released
(2) reinit all ubqs, including:
(a) put the task_struct and reset ->ubq_daemon to NULL.
(b) reset all ublk_io.
(3) reset ub->mm to NULL.
Then, user should start a new process and send FETCH_REQ on each
ubq_daemon.
Finally, user should send END_USER_RECOVERY, it will:
(1) wait for all new ubq_daemons getting ready.
(2) update ublksrv_pid
(3) unquiesce the request queue and expect incoming ublk_queue_rq()
(4) convert ub's state to UBLK_S_DEV_LIVE
Note: we can handle STOP_DEV between START_USER_RECOVERY and
END_USER_RECOVERY. This is helpful to users who cannot start new process
after sending START_USER_RECOVERY ctrl-cmd.
Signed-off-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220923153919.44078-7-ZiyangZhang@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
UBLK_F_USER_RECOVERY_REISSUE implies that:
With a dying ubq_daemon, ublk_drv let monitor_work requeues rq issued to
userspace(ublksrv) before the ubq_daemon is dying.
UBLK_F_USER_RECOVERY_REISSUE is designed for backends which:
(1) tolerate double-write since ublk_drv may issue the same rq
twice.
(2) does not let frontend users get I/O error, such as read-only FS
and VM backend.
Signed-off-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220923153919.44078-6-ZiyangZhang@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Define some macros for recovery feature.
UBLK_S_DEV_QUIESCED implies that ublk_device is quiesced
and is ready for recovery. This state can be observed by userspace.
UBLK_F_USER_RECOVERY implies that:
(1) ublk_drv enables recovery feature. It won't let monitor_work to
automatically abort rqs and release the device.
(2) With a dying ubq_daemon, ublk_drv ends(aborts) rqs issued to
userspace(ublksrv) before crash.
(3) With a dying ubq_daemon, in task work and ublk_queue_rq(),
ublk_drv requeues rqs.
Signed-off-by: ZiyangZhang <ZiyangZhang@linux.alibaba.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220923153919.44078-3-ZiyangZhang@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"These are all very simple and self-contained, although the CFI
jump-table fix touches the generic linker script as that's where the
problematic macro lives.
- Fix false positive "sleeping while atomic" warning resulting from
the kPTI rework taking a mutex too early.
- Fix possible overflow in AMU frequency calculation
- Fix incorrect shift in CMN PMU driver which causes problems with
newer versions of the IP
- Reduce alignment of the CFI jump table to avoid huge kernel images
and link errors with !4KiB page size configurations"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
vmlinux.lds.h: CFI: Reduce alignment of jump-table to function alignment
perf/arm-cmn: Add more bits to child node address offset field
arm64: topology: fix possible overflow in amu_fie_setup()
arm64: mm: don't acquire mutex when rewriting swapper
|
|
for-6.0 has the following fix for cgroup_get_from_id().
836ac87d ("cgroup: fix cgroup_get_from_id")
which conflicts with the following two commits in for-6.1.
4534dee9 ("cgroup: cgroup: Honor caller's cgroup NS when resolving cgroup id")
fa7e439c ("cgroup: Homogenize cgroup_get_from_id() return value")
While the resolution is straightforward, the code ends up pretty ugly
afterwards. Let's pull for-6.0-fixes into for-6.1 so that the code can be
fixed up there.
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
There are currently no users of this driver's platform data in the
mainline kernel, so let's drop it.
Newer devices should use DT, ACPI, or static software properties to
describe the hardware.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20220920025804.1788667-1-dmitry.torokhov@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are two tiny driver core fixes for 6.0-rc7 that resolve some
oft-reported problems.
The first is a revert of the "fw_devlink.strict=1" default option that
we keep trying to enable, but we keep finding platforms that this just
breaks everything on. So again, we need it reverted and hopefully it
can be worked on in future releases.
The second is a sysfs file-size bugfix that resolves an issue that
many people are starting to hit as the fix it is fixing also was
backported to stable kernels. The util-linux developers are starting
to get bugreports about sysfs files that contain no data because of
this problem, and this fix which has been in linux-next in the
bitfield tree for a long time, resolves it. I'm submitting it here as
it needs to be merged for 6.0-final, not for 6.1-rc1.
Both of these have been in linux-next with no reported issues, only
reports were that these fixed problems"
* tag 'driver-core-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
drivers/base: Fix unsigned comparison to -1 in CPUMAP_FILE_MAX_BYTES
Revert "driver core: Set fw_devlink.strict=1 by default"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers
soc/tegra: cbb: Changes for v6.1-rc1
This introduces the CBB driver that is used to provide (a lot of)
information about SErrors when things go wrong, instead of the kernel
just crashing or hanging.
* tag 'tegra-for-6.1-cbb' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: cbb: Add support for Tegra241 (Grace)
soc/tegra: cbb: Add driver for Tegra234 CBB 2.0
soc/tegra: cbb: Add CBB 1.0 driver for Tegra194
soc/tegra: Set ERD bit to mask inband errors
Link: https://lore.kernel.org/r/20220916101957.1635854-2-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers
Qualcomm driver updates for 6.1
The icc-bwmon driver is expected to support measuring LLCC/DDR bandwidth
on SDM845 and SC7280.
The LLCC driver is extended to provide per-platform register mappings to
the LLCC EDAC driver. The QMI encoder/decoder is updated to allow the
passed qmi_elem_info to be const.
Support for SDM845 is added to the sleep stats driver. Power-domains for
the SM6375 platform is added to RPMPD and the platform is added to
socinfo, together with the PM6125 pmic id.
A couple of of_node reference issues are corrected in the smem state and
smsm drivers.
The Qualcomm SCM driver binding is converted to YAML.
* tag 'qcom-drivers-for-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (29 commits)
soc: qcom: rpmpd: Add SM6375 support
dt-bindings: power: rpmpd: Add SM6375 power domains
firmware: qcom: scm: remove unused __qcom_scm_init declaration
dt-bindings: power: qcom,rpmpd: drop non-working codeaurora.org emails
soc: qcom: icc-bwmon: force clear counter/irq registers
soc: qcom: icc-bwmon: add support for sc7280 LLCC BWMON
dt-bindings: interconnect: qcom,msm8998-bwmon: Add support for sc7280 BWMONs
soc: qcom: llcc: Pass LLCC version based register offsets to EDAC driver
soc: qcom: llcc: Rename reg_offset structs to reflect LLCC version
soc: qcom: qmi: use const for struct qmi_elem_info
soc: qcom: icc-bwmon: remove redundant ret variable
dt-bindings: soc: qcom: stats: Document SDM845 compatible
soc: qcom: stats: Add SDM845 stats config and compatible
dt-bindings: firmware: document Qualcomm SM6115 SCM
soc: qcom: Make QCOM_RPMPD depend on OF
dt-bindings: firmware: convert Qualcomm SCM binding to the yaml
soc: qcom: socinfo: Add PM6125 ID
soc: qcom: socinfo: Add an ID for SM6375
soc: qcom: smem_state: Add refcounting for the 'state->of_node'
soc: qcom: smsm: Fix refcount leak bugs in qcom_smsm_probe()
...
Link: https://lore.kernel.org/r/20220921155753.1316308-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/drivers
pmic-wrapper:
- add support for mt8188
SVS:
- several driver cleanups
power-domain:
- several cleanups of the dt-bindings and driver
mutex:
- add support to mt6795 disp mutex
- add support for mt8186 mdp3 mutex
* tag 'v6.0-next-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
soc: mediatek: Add mmsys func to adapt to dpi output for MT8186
soc: mediatek: mutex: Add support for MT6795 Helio X10 display mutex
dt-bindings: soc: mediatek: Add display mutex support for MT6795
soc: mediatek: mutex: Add mt8186 mutex mod settings for mdp3
dt-bindings: soc: mediatek: Add mdp3 mutex support for mt8186
soc: mediatek: pm-domains: Simplify some error message
soc: mediatek: mtk-svs: Explicitly include bitfield header
soc: mediatek: mtk-svs: Use bitfield access macros where possible
soc: mediatek: mtk-svs: Commonize t-calibration-data fuse array read
dt-bindings: power: mediatek: Update maintainer list
dt-bindings: power: mediatek: Support naming power controller node with unit address
dt-bindings: power: mediatek: Refine multiple level power domain nodes
soc: mediatek: mtk-svs: Use devm variant for dev_pm_opp_of_add_table()
soc: mediatek: mtk-svs: Drop of_match_ptr() for of_match_table
soc: mediatek: mtk-svs: Remove hardcoded irqflags
soc: mediatek: mtk-svs: Switch to platform_get_irq()
dt-bindings: soc: mediatek: pwrap: add compatible for mt8188
soc: mediatek: Let PMIC Wrapper and SCPSYS depend on OF
Link: https://lore.kernel.org/r/498fe3e5-a237-121a-d500-fbb0994906cb@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/drivers
sunxi SRAM driver changes:
- minor code refactor
- support for Allwinner D1
* tag 'sunxi-drivers-for-6.1-1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
soc: sunxi: sram: Add support for the D1 system control
soc: sunxi: sram: Export the LDO control register
soc: sunxi: sram: Save a pointer to the OF match data
soc: sunxi: sram: Return void from the release function
soc: sunxi: sram: Fix debugfs info for A64 SRAM C
soc: sunxi: sram: Fix probe function ordering issues
soc: sunxi: sram: Prevent the driver from being unbound
soc: sunxi: sram: Actually claim SRAM regions
Link: https://lore.kernel.org/r/YyeOthH4y8wy8A8R@kista.localdomain
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers
i.MX drivers change for 6.1:
- Update i.MX8MP blk-ctrl driver to handle PCIe PHY reset bit.
- Add interconnect support into i.MX8MP blk-ctrl driver, so that i.MX8MP
NoC can be set up properly after related power domain is up.
- Add blk-ctrl support for i.MX8MP HDMI HDCP/HRV and VPU block.
- Add i.MX93 SRC power domain and MEDIA blk-ctrl driver.
- Update imx8m-blk-ctrl driver to use genpd_xlate_onecell.
* tag 'imx-drivers-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (26 commits)
soc: imx: add i.MX93 media blk ctrl driver
soc: imx: add i.MX93 SRC power domain driver
soc: imx: imx8m-blk-ctrl: Use genpd_xlate_onecell
soc: imx: imx8mp-blk-ctrl: handle PCIe PHY resets
soc: imx: imx8m-blk-ctrl: add i.MX8MP VPU blk ctrl
soc: imx: add i.MX8MP HDMI blk ctrl HDCP/HRV_MWR
soc: imx: add icc paths for i.MX8MP hsio/hdmi blk ctrl
soc: imx: add icc paths for i.MX8MP media blk ctrl
dt-bindings: arm: imx: update fsl.yaml for imx8dxl
dt-bindings: firmware: add missing resource IDs for imx8dxl
dt-bindings: arm: Add i.MX8M Mini Gateworks GW7904 board
dt-bindings: soc: add i.MX93 mediamix blk ctrl
dt-bindings: soc: add i.MX93 SRC
dt-bindings: mfd: syscon: Add i.MX93 blk ctrl system registers
dt-bindings: arm: fsl: Add MSC SM2S-IMX8PLUS SoM and SM2-MB-EP1 Carrier
dt-bindings: arm: fsl: Add Kontron BL i.MX8MM OSM-S board
dt-bindings: arm: fsl: Rename compatibles for Kontron i.MX8MM SoM/board
dt-bindings: soc: imx: add i.MX8MP vpu blk ctrl
dt-bindings: soc: imx: add interconnect property for i.MX8MM vpu blk ctrl
dt-bindings: soc: imx: drop minItems for i.MX8MM vpu blk ctrl
...
Link: https://lore.kernel.org/r/20220918092806.2152700-2-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM64 DTS updates for 6.1
Support for Samsung Galaxy E5, E7 and Grand Max is added, with support
for both 32-bit and 64-bit variants. The Samsung Galaxy S4 Mini Value
Edition gains magnetometer support.
MSM8996-based Xiaomi devices gains descriptions of the LPG-based LEDs.
On SA8295P ADP problems arising from regulators being switched into
low-power mode is worked around by removing this ability, for now.
The onboard USB Hub on SC7180 Trogdor is finally described and a few ADC
related updates are introduced.
On SC7280 support for the CPU and LLC bwmon instances are introduced.
Soundwire, audio codecs and sound introduced for a variety of boards.
Using required-opps the USB controllers votes for a minimum corner on
VDD_CX.
The onboard USB Hub Herobrine is described. A new board, the Google
Evoker is added, as is another revision of Herobrine Villager.
On SC8280XP the USB controllers are marked as wakeup-sources, to keep
them powered during suspend. The CRD has HID devices marked as
wakeup-sources to enable resuming the system. In addition to these
changes the alternative touchpad is introduced on the Lenovo ThinkPad
X13s.
SDM845 gains RPMh stats support and the LLCC BWMON is added. For SM6350
interconnect providers and GPI DMA is introduced. A description of the
PM7280b PMIC is added to Fairphone FP4 on SM7225.
With the multi-MSI support added in the PCIe controller, SM8250 gets all
its MSI interrupts added.
UFS ICE and the second SDHCI controller is introduced on SM8450. Support
for the Sony Xperia 1 IV is introduced.
Throughout a variety of platforms the TCSR mutex syscon is replaced with
the MMIO-based binding. TCSR nodes gained proper compatibles and halt
syscon nodes are split out from the mutex ranges.
A range of fixes to align with DT bindings are introduced. Among these
are the changes to the follow the TLMM binding and suffix pinctrl states
with -state and subnodes thereof with -pins, another is a number of
changes transitioning to use -gpios and introduction of proper parent
clock references in various clock providers.
* tag 'qcom-arm64-for-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (136 commits)
arm64: dts: qcom: sc7280: Add required-opps for USB
arm64: dts: qcom: sm8450: fix UFS PHY serdes size
arm64: dts: qcom: ipq8074: fix PCIe PHY serdes size
arm64: dts: qcom: sa8295p-adp: add missing gpio-ranges in PMIC GPIOs
arm64: dts: qcom: sa8295p-adp: add fallback compatible to PMIC GPIOs
arm64: dts: qcom: msm8996-xiaomi: align PMIC GPIO pin configuration with DT schema
arm64: dts: qcom: msm8994-msft-lumia-octagon: align resin node name with bindings
arm64: dts: qcom: pmi8994: add missing MPP compatible fallback
dt-bindings: pci: QCOM Add missing sc7280 aggre0, aggre1 clocks
arm64: dts: qcom: sc7280: Add missing aggre0, aggre1 clocks
arm64: dts: qcom: sc7280-villager: Adjust LTE SKUs
dt-bindings: arm: qcom: Adjust LTE SKUs for sc7280-villager
arm64: dts: qcom: sc7280-herobrine: Add nodes for onboard USB hub
arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub
arm64: dts: qcom: align SDHCI reg-names with DT schema
arm64: dts: qcom: sm8250: provide additional MSI interrupts
arm64: dts: qcom: msm8996: add #clock-cells and XO clock to the HDMI PHY node
arm64: dts: qcom: Use WCD9335 DT bindings
arm64: dts: qcom: msm8994: switch TCSR mutex to MMIO
arm64: dts: qcom: ipq6018: switch TCSR mutex to MMIO
...
Link: https://lore.kernel.org/r/20220921234854.1343238-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into arm/dt
TI K3 device tree updates for v6.1
New Features:
AM62A:
* Basic support for AM62A SoC and SK Board
AM62:
* EPWM support
AM64:
* GPMC, LED, Crypto accelerator support
Fixes:
J7200 pinmux node update
Fixes for Crypto and RNG accelerators on AM65, J721e, J7200
Cleanups:
Reorder SoC compatible and pinmux macros alphabetically
* tag 'ti-k3-dt-for-v6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (22 commits)
arm64: dts: ti: k3-j7200: fix main pinmux range
arm64: dts: ti: Add support for AM62A7-SK
arm64: dts: ti: Introduce AM62A7 family of SoCs
dt-bindings: pinctrl: k3: Introduce pinmux definitions for AM62A
dt-bindings: arm: ti: Add bindings for AM62A7 SoC
dt-bindings: arm: ti: Rearrange IOPAD macros alphabetically
arm64: dts: ti: k3-am625-sk: Add epwm nodes
arm64: dts: ti: k3-am62-main: Add epwm nodes
arm64: dts: ti: k3-am642-sk: Add DT entry for onboard LEDs
arm64: dts: ti: k3-j7200-mcu-wakeup: Add SA2UL node
arm64: dts: ti: k3-am65-main: Do not exclusively claim SA2UL
arm64: dts: ti: k3-am65-main: Move SA2UL to unused PSI-L thread ID
arm64: dts: ti: k3-am65-main: Disable RNG node
arm64: dts: ti: k3-j7200-main: Add main domain watchdog entries
arm64: dts: ti: k3-am64-main: Add ELM (Error Location Module) node
arm64: dts: ti: k3-am64-main: Add GPMC memory controller node
arm64: dts: ti: k3-j721e-main: fix RNG node clock id
arm64: dts: ti: k3-am64-main: Enable crypto accelerator
arm64: dts: ti: k3-am64: Add SA2UL address space to Main CBASS ranges
arm64: dts: ti: k3-am64-main: Add main_cpts label
...
Link: https://lore.kernel.org/r/44729b46-27f9-94a0-17ed-8868649a4a0a@ti.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Now that the MACsec offloading preparation phase was removed from the
MACsec core implementation as well as from drivers implementing it, we
can safely remove the flag representing it.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX DT bindings for 6.1:
- Add compatible for new boards: Kontron BL i.MX8MM OSM-S, MSC
SM2S-IMX8PLUS SoM and SM2-MB-EP1 Carrier, i.MX8M Mini Gateworks
GW7904 board, i.MX8DXL EVK Board.
- Add add interconnect property for i.MX8MP various blk-ctrl devices.
- Add i.MX8MP HDMI HDCP and HRV power domain DT IDs.
- Add bindings for i.MX93 SRC and MEDIAMIX blk-ctrl.
- A minor style fix on i.MX8MM clock binding header.
* tag 'imx-bindings-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
dt-bindings: arm: imx: update fsl.yaml for imx8dxl
dt-bindings: firmware: add missing resource IDs for imx8dxl
dt-bindings: arm: Add i.MX8M Mini Gateworks GW7904 board
dt-bindings: soc: add i.MX93 mediamix blk ctrl
dt-bindings: soc: add i.MX93 SRC
dt-bindings: mfd: syscon: Add i.MX93 blk ctrl system registers
dt-bindings: arm: fsl: Add MSC SM2S-IMX8PLUS SoM and SM2-MB-EP1 Carrier
dt-bindings: arm: fsl: Add Kontron BL i.MX8MM OSM-S board
dt-bindings: arm: fsl: Rename compatibles for Kontron i.MX8MM SoM/board
dt-bindings: soc: imx: add i.MX8MP vpu blk ctrl
dt-bindings: soc: imx: add interconnect property for i.MX8MM vpu blk ctrl
dt-bindings: soc: imx: drop minItems for i.MX8MM vpu blk ctrl
dt-bindings: power: imx8mp-power: add HDMI HDCP/HRV
dt-bindings: arm: fsl: imx6ul-kontron: Update bindings
dt-bindings: clk: imx8mm: don't use multiple blank lines
dt-bindings: soc: imx: add interconnect property for i.MX8MP hsio blk ctrl
dt-bindings: soc: imx: add interconnect property for i.MX8MP hdmi blk ctrl
dt-bindings: soc: imx: add interconnect property for i.MX8MP media blk ctrl
Link: https://lore.kernel.org/r/20220918092806.2152700-1-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
dt-bindings: Changes for v6.1-rc1
Adds device tree bindings for the MGBE found on Tegra234 SoCs, as well
as stream IDs for the shared host1x context devices.
* tag 'tegra-for-6.1-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: Add Host1x context stream IDs on Tegra234
dt-bindings: net: Add Tegra234 MGBE
Link: https://lore.kernel.org/r/20220916101957.1635854-4-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Due to undocumented, hysterical raisins on x86, the CFI jump-table
sections in .text are needlessly aligned to PMD_SIZE in the vmlinux
linker script. When compiling a CFI-enabled arm64 kernel with a 64KiB
page-size, a PMD maps 512MiB of virtual memory and so the .text section
increases to a whopping 940MiB and blows the final Image up to 960MiB.
Others report a link failure.
Since the CFI jump-table requires only instruction alignment, reduce the
alignment directives to function alignment for parity with other parts
of the .text section. This reduces the size of the .text section for the
aforementioned 64KiB page size arm64 kernel to 19MiB for a much more
reasonable total Image size of 39MiB.
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: "Mohan Rao .vanimina" <mailtoc.mohanrao@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/all/CAL_GTzigiNOMYkOPX1KDnagPhJtFNqSK=1USNbS0wUL4PW6-Uw@mail.gmail.com/
Fixes: cf68fffb66d6 ("add support for Clang CFI")
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220922215715.13345-1-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
resctrl_arch_rmid_read() returns a value in chunks, as read from the
hardware. This needs scaling to bytes by mon_scale, as provided by
the architecture code.
Now that resctrl_arch_rmid_read() performs the overflow and corrections
itself, it may as well return a value in bytes directly. This allows
the accesses to the architecture specific 'hw' structure to be removed.
Move the mon_scale conversion into resctrl_arch_rmid_read().
mbm_bw_count() is updated to calculate bandwidth from bytes.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <quic_jiles@quicinc.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20220902154829.30399-22-james.morse@arm.com
|
|
resctrl_rmid_realloc_threshold can be set by user-space. The maximum
value is specified by the architecture.
Currently max_threshold_occ_write() reads the maximum value from
boot_cpu_data.x86_cache_size, which is not portable to another
architecture.
Add resctrl_rmid_realloc_limit to describe the maximum size in bytes
that user-space can set the threshold to.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <quic_jiles@quicinc.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20220902154829.30399-21-james.morse@arm.com
|
|
resctrl_cqm_threshold is stored in a hardware specific chunk size,
but exposed to user-space as bytes.
This means the filesystem parts of resctrl need to know how the hardware
counts, to convert the user provided byte value to chunks. The interface
between the architecture's resctrl code and the filesystem ought to
treat everything as bytes.
Change the unit of resctrl_cqm_threshold to bytes. resctrl_arch_rmid_read()
still returns its value in chunks, so this needs converting to bytes.
As all the users have been touched, rename the variable to
resctrl_rmid_realloc_threshold, which describes what the value is for.
Neither r->num_rmid nor hw_res->mon_scale are guaranteed to be a power
of 2, so the existing code introduces a rounding error from resctrl's
theoretical fraction of the cache usage. This behaviour is kept as it
ensures the user visible value matches the value read from hardware
when the rmid will be reallocated.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <quic_jiles@quicinc.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20220902154829.30399-20-james.morse@arm.com
|
|
resctrl_arch_rmid_read() is intended as the function that an
architecture agnostic resctrl filesystem driver can use to
read a value in bytes from a hardware register. Currently the function
returns the MBM values in chunks directly from hardware.
To convert this to bytes, some correction and overflow calculations
are needed. These depend on the resource and domain structures.
Overflow detection requires the old chunks value. None of this
is available to resctrl_arch_rmid_read(). MPAM requires the
resource and domain structures to find the MMIO device that holds
the registers.
Pass the resource and domain to resctrl_arch_rmid_read(). This makes
rmid_dirty() too big. Instead merge it with its only caller, and the
name is kept as a local variable.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <quic_jiles@quicinc.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20220902154829.30399-17-james.morse@arm.com
|
|
__rmid_read() selects the specified eventid and returns the counter
value from the MSR. The error handling is architecture specific, and
handled by the callers, rdtgroup_mondata_show() and __mon_event_count().
Error handling should be handled by architecture specific code, as
a different architecture may have different requirements. MPAM's
counters can report that they are 'not ready', requiring a second
read after a short delay. This should be hidden from resctrl.
Make __rmid_read() the architecture specific function for reading
a counter. Rename it resctrl_arch_rmid_read() and move the error
handling into it.
A read from a counter that hardware supports but resctrl does not
now returns -EINVAL instead of -EIO from the default case in
__mon_event_count(). It isn't possible for user-space to see this
change as resctrl doesn't expose counters it doesn't support.
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jamie Iles <quic_jiles@quicinc.com>
Reviewed-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Xin Hao <xhao@linux.alibaba.com>
Tested-by: Shaopeng Tan <tan.shaopeng@fujitsu.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20220902154829.30399-16-james.morse@arm.com
|
|
This change adds support for not enabling carrier during TUNSETIFF
interface creation by specifying the IFF_NO_CARRIER flag.
Our tests make heavy use of tun interfaces. In some scenarios, the test
process creates the interface but another process brings it up after the
interface is discovered via netlink notification. In that case, it is
not possible to create a tun/tap interface with carrier off without it
racing against the bring up. Immediately setting carrier off via
TUNSETCARRIER is still too late.
Signed-off-by: Patrick Rohr <prohr@google.com>
Cc: Maciej Żenczykowski <maze@google.com>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Stephen Hemminger <stephen@networkplumber.org>
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
