| Age | Commit message (Collapse) | Author |
|---|
|
Currently rcu_barrier() is used to ensure that no readers of the
inactive mini_Qdisc buffer remain before it is reused. This waits for
any pending RCU callbacks to complete, when all that is actually
required is to wait for one RCU grace period to elapse after the buffer
was made inactive. This means that using rcu_barrier() may result in
unnecessary waits.
To improve this, store the current RCU state when a buffer is made
inactive and use poll_state_synchronize_rcu() to check whether a full
grace period has elapsed before reusing it. If a full grace period has
not elapsed, wait for a grace period to elapse, and in the non-RT case
use synchronize_rcu_expedited() to hasten it.
Since this approach eliminates the RCU callback it is no longer
necessary to synchronize_rcu() in the tp_head==NULL case. However, the
RCU state should still be saved for the previously active buffer.
Before this change I would typically see mini_qdisc_pair_swap() take
tens of milliseconds to complete. After this change it typcially
finishes in less than 1 ms, and often it takes just a few microseconds.
Thanks to Paul for walking me through the options for improving this.
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Signed-off-by: Seth Forshee <sforshee@digitalocean.com>
Link: https://lore.kernel.org/r/20211026130700.121189-1-seth@forshee.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
To be able to send auditing events to user space, we introduce a
generic dm-audit module. It provides helper functions to emit audit
events through the kernel audit subsystem. We claim the
AUDIT_DM_CTRL type=1336 and AUDIT_DM_EVENT type=1337 out of the
audit event messages range in the corresponding userspace api in
'include/uapi/linux/audit.h' for those events.
AUDIT_DM_CTRL is used to provide information about creation and
destruction of device mapper targets which are triggered by user space
admin control actions.
AUDIT_DM_EVENT is used to provide information about actual errors
during operation of the mapped device, showing e.g. integrity
violations in audit log.
Following commits to device mapper targets actually will make use of
this to emit those events in relevant cases.
The audit logs look like this if executing the following simple test:
# dd if=/dev/zero of=test.img bs=1M count=1024
# losetup -f test.img
# integritysetup -vD format --integrity sha256 -t 32 /dev/loop0
# integritysetup open -D /dev/loop0 --integrity sha256 integritytest
# integritysetup status integritytest
# integritysetup close integritytest
# integritysetup open -D /dev/loop0 --integrity sha256 integritytest
# integritysetup status integritytest
# dd if=/dev/urandom of=/dev/loop0 bs=512 count=1 seek=100000
# dd if=/dev/mapper/integritytest of=/dev/null
-------------------------
audit.log from auditd
type=UNKNOWN[1336] msg=audit(1630425039.363:184): module=integrity
op=ctr ppid=3807 pid=3819 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0
egid=0 sgid=0 fsgid=0 tty=pts2 ses=3 comm="integritysetup"
exe="/sbin/integritysetup" subj==unconfined dev=254:3
error_msg='success' res=1
type=UNKNOWN[1336] msg=audit(1630425039.471:185): module=integrity
op=dtr ppid=3807 pid=3819 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0
egid=0 sgid=0 fsgid=0 tty=pts2 ses=3 comm="integritysetup"
exe="/sbin/integritysetup" subj==unconfined dev=254:3
error_msg='success' res=1
type=UNKNOWN[1336] msg=audit(1630425039.611:186): module=integrity
op=ctr ppid=3807 pid=3819 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0
egid=0 sgid=0 fsgid=0 tty=pts2 ses=3 comm="integritysetup"
exe="/sbin/integritysetup" subj==unconfined dev=254:3
error_msg='success' res=1
type=UNKNOWN[1336] msg=audit(1630425054.475:187): module=integrity
op=dtr ppid=3807 pid=3819 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0
egid=0 sgid=0 fsgid=0 tty=pts2 ses=3 comm="integritysetup"
exe="/sbin/integritysetup" subj==unconfined dev=254:3
error_msg='success' res=1
type=UNKNOWN[1336] msg=audit(1630425073.171:191): module=integrity
op=ctr ppid=3807 pid=3883 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0
egid=0 sgid=0 fsgid=0 tty=pts2 ses=3 comm="integritysetup"
exe="/sbin/integritysetup" subj==unconfined dev=254:3
error_msg='success' res=1
type=UNKNOWN[1336] msg=audit(1630425087.239:192): module=integrity
op=dtr ppid=3807 pid=3902 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0
egid=0 sgid=0 fsgid=0 tty=pts2 ses=3 comm="integritysetup"
exe="/sbin/integritysetup" subj==unconfined dev=254:3
error_msg='success' res=1
type=UNKNOWN[1336] msg=audit(1630425093.755:193): module=integrity
op=ctr ppid=3807 pid=3906 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0
egid=0 sgid=0 fsgid=0 tty=pts2 ses=3 comm="integritysetup"
exe="/sbin/integritysetup" subj==unconfined dev=254:3
error_msg='success' res=1
type=UNKNOWN[1337] msg=audit(1630425112.119:194): module=integrity
op=integrity-checksum dev=254:3 sector=77480 res=0
type=UNKNOWN[1337] msg=audit(1630425112.119:195): module=integrity
op=integrity-checksum dev=254:3 sector=77480 res=0
type=UNKNOWN[1337] msg=audit(1630425112.119:196): module=integrity
op=integrity-checksum dev=254:3 sector=77480 res=0
type=UNKNOWN[1337] msg=audit(1630425112.119:197): module=integrity
op=integrity-checksum dev=254:3 sector=77480 res=0
type=UNKNOWN[1337] msg=audit(1630425112.119:198): module=integrity
op=integrity-checksum dev=254:3 sector=77480 res=0
type=UNKNOWN[1337] msg=audit(1630425112.119:199): module=integrity
op=integrity-checksum dev=254:3 sector=77480 res=0
type=UNKNOWN[1337] msg=audit(1630425112.119:200): module=integrity
op=integrity-checksum dev=254:3 sector=77480 res=0
type=UNKNOWN[1337] msg=audit(1630425112.119:201): module=integrity
op=integrity-checksum dev=254:3 sector=77480 res=0
type=UNKNOWN[1337] msg=audit(1630425112.119:202): module=integrity
op=integrity-checksum dev=254:3 sector=77480 res=0
type=UNKNOWN[1337] msg=audit(1630425112.119:203): module=integrity
op=integrity-checksum dev=254:3 sector=77480 res=0
Signed-off-by: Michael Weiß <michael.weiss@aisec.fraunhofer.de>
Signed-off-by: Paul Moore <paul@paul-moore.com> # fix audit.h numbering
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
|
|
There are some duplicated codes to validate the block
size in block drivers. This limitation actually comes
from block layer, so this patch tries to add a new block
layer helper for that.
Signed-off-by: Xie Yongji <xieyongji@bytedance.com>
Link: https://lore.kernel.org/r/20211026144015.188-2-xieyongji@bytedance.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
When the dedicated wake IRQ is level trigger, and it uses the
device's low-power status as the wakeup source, that means if the
device is not in low-power state, the wake IRQ will be triggered
if enabled; For this case, need enable the wake IRQ after running
the device's ->runtime_suspend() which make it enter low-power state.
e.g.
Assume the wake IRQ is a low level trigger type, and the wakeup
signal comes from the low-power status of the device.
The wakeup signal is low level at running time (0), and becomes
high level when the device enters low-power state (runtime_suspend
(1) is called), a wakeup event at (2) make the device exit low-power
state, then the wakeup signal also becomes low level.
------------------
| ^ ^|
---------------- | | --------------
|<---(0)--->|<--(1)--| (3) (2) (4)
if enable the wake IRQ before running runtime_suspend during (0),
a wake IRQ will arise, it causes resume immediately;
it works if enable wake IRQ ( e.g. at (3) or (4)) after running
->runtime_suspend().
This patch introduces a new status WAKE_IRQ_DEDICATED_REVERSE to
optionally support enabling wake IRQ after running ->runtime_suspend().
Suggested-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
apei_hest_parse() is only used in hest.c, so mark it static.
Signed-off-by: Christoph Hellwig <hch@lst.de>
[ rjw: Minor subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Commit 316580b69d0a ("u64_stats: provide u64_stats_t type")
fixed possible load/store tearing on 64bit arches.
For instance the following C code
stats->nsecs += sched_clock() - start;
Could be rightfully implemented like this by a compiler,
confusing concurrent readers a lot:
stats->nsecs += sched_clock();
// arbitrary delay
stats->nsecs -= start;
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211026214133.3114279-4-eric.dumazet@gmail.com
|
|
__bpf_prog_run() can run from non IRQ contexts, meaning
it could be re entered if interrupted.
This calls for the irq safe variant of u64_stats_update_{begin|end},
or risk a deadlock.
This patch is a nop on 64bit arches, fortunately.
syzbot report:
WARNING: inconsistent lock state
5.12.0-rc3-syzkaller #0 Not tainted
--------------------------------
inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
udevd/4013 [HC0[0]:SC0[0]:HE1:SE1] takes:
ff7c9dec (&(&pstats->syncp)->seq){+.?.}-{0:0}, at: sk_filter include/linux/filter.h:867 [inline]
ff7c9dec (&(&pstats->syncp)->seq){+.?.}-{0:0}, at: do_one_broadcast net/netlink/af_netlink.c:1468 [inline]
ff7c9dec (&(&pstats->syncp)->seq){+.?.}-{0:0}, at: netlink_broadcast_filtered+0x27c/0x4fc net/netlink/af_netlink.c:1520
{IN-SOFTIRQ-W} state was registered at:
lock_acquire.part.0+0xf0/0x41c kernel/locking/lockdep.c:5510
lock_acquire+0x6c/0x74 kernel/locking/lockdep.c:5483
do_write_seqcount_begin_nested include/linux/seqlock.h:520 [inline]
do_write_seqcount_begin include/linux/seqlock.h:545 [inline]
u64_stats_update_begin include/linux/u64_stats_sync.h:129 [inline]
bpf_prog_run_pin_on_cpu include/linux/filter.h:624 [inline]
bpf_prog_run_clear_cb+0x1bc/0x270 include/linux/filter.h:755
run_filter+0xa0/0x17c net/packet/af_packet.c:2031
packet_rcv+0xc0/0x3e0 net/packet/af_packet.c:2104
dev_queue_xmit_nit+0x2bc/0x39c net/core/dev.c:2387
xmit_one net/core/dev.c:3588 [inline]
dev_hard_start_xmit+0x94/0x518 net/core/dev.c:3609
sch_direct_xmit+0x11c/0x1f0 net/sched/sch_generic.c:313
qdisc_restart net/sched/sch_generic.c:376 [inline]
__qdisc_run+0x194/0x7f8 net/sched/sch_generic.c:384
qdisc_run include/net/pkt_sched.h:136 [inline]
qdisc_run include/net/pkt_sched.h:128 [inline]
__dev_xmit_skb net/core/dev.c:3795 [inline]
__dev_queue_xmit+0x65c/0xf84 net/core/dev.c:4150
dev_queue_xmit+0x14/0x18 net/core/dev.c:4215
neigh_resolve_output net/core/neighbour.c:1491 [inline]
neigh_resolve_output+0x170/0x228 net/core/neighbour.c:1471
neigh_output include/net/neighbour.h:510 [inline]
ip6_finish_output2+0x2e4/0x9fc net/ipv6/ip6_output.c:117
__ip6_finish_output net/ipv6/ip6_output.c:182 [inline]
__ip6_finish_output+0x164/0x3f8 net/ipv6/ip6_output.c:161
ip6_finish_output+0x2c/0xb0 net/ipv6/ip6_output.c:192
NF_HOOK_COND include/linux/netfilter.h:290 [inline]
ip6_output+0x74/0x294 net/ipv6/ip6_output.c:215
dst_output include/net/dst.h:448 [inline]
NF_HOOK include/linux/netfilter.h:301 [inline]
NF_HOOK include/linux/netfilter.h:295 [inline]
mld_sendpack+0x2a8/0x7e4 net/ipv6/mcast.c:1679
mld_send_cr net/ipv6/mcast.c:1975 [inline]
mld_ifc_timer_expire+0x1e8/0x494 net/ipv6/mcast.c:2474
call_timer_fn+0xd0/0x570 kernel/time/timer.c:1431
expire_timers kernel/time/timer.c:1476 [inline]
__run_timers kernel/time/timer.c:1745 [inline]
run_timer_softirq+0x2e4/0x384 kernel/time/timer.c:1758
__do_softirq+0x204/0x7ac kernel/softirq.c:345
do_softirq_own_stack include/asm-generic/softirq_stack.h:10 [inline]
invoke_softirq kernel/softirq.c:228 [inline]
__irq_exit_rcu+0x1d8/0x200 kernel/softirq.c:422
irq_exit+0x10/0x3c kernel/softirq.c:446
__handle_domain_irq+0xb4/0x120 kernel/irq/irqdesc.c:692
handle_domain_irq include/linux/irqdesc.h:176 [inline]
gic_handle_irq+0x84/0xac drivers/irqchip/irq-gic.c:370
__irq_svc+0x5c/0x94 arch/arm/kernel/entry-armv.S:205
debug_smp_processor_id+0x0/0x24 lib/smp_processor_id.c:53
rcu_read_lock_held_common kernel/rcu/update.c:108 [inline]
rcu_read_lock_sched_held+0x24/0x7c kernel/rcu/update.c:123
trace_lock_acquire+0x24c/0x278 include/trace/events/lock.h:13
lock_acquire+0x3c/0x74 kernel/locking/lockdep.c:5481
rcu_lock_acquire include/linux/rcupdate.h:267 [inline]
rcu_read_lock include/linux/rcupdate.h:656 [inline]
avc_has_perm_noaudit+0x6c/0x260 security/selinux/avc.c:1150
selinux_inode_permission+0x140/0x220 security/selinux/hooks.c:3141
security_inode_permission+0x44/0x60 security/security.c:1268
inode_permission.part.0+0x5c/0x13c fs/namei.c:521
inode_permission fs/namei.c:494 [inline]
may_lookup fs/namei.c:1652 [inline]
link_path_walk.part.0+0xd4/0x38c fs/namei.c:2208
link_path_walk fs/namei.c:2189 [inline]
path_lookupat+0x3c/0x1b8 fs/namei.c:2419
filename_lookup+0xa8/0x1a4 fs/namei.c:2453
user_path_at_empty+0x74/0x90 fs/namei.c:2733
do_readlinkat+0x5c/0x12c fs/stat.c:417
__do_sys_readlink fs/stat.c:450 [inline]
sys_readlink+0x24/0x28 fs/stat.c:447
ret_fast_syscall+0x0/0x2c arch/arm/mm/proc-v7.S:64
0x7eaa4974
irq event stamp: 298277
hardirqs last enabled at (298277): [<802000d0>] no_work_pending+0x4/0x34
hardirqs last disabled at (298276): [<8020c9b8>] do_work_pending+0x9c/0x648 arch/arm/kernel/signal.c:676
softirqs last enabled at (298216): [<8020167c>] __do_softirq+0x584/0x7ac kernel/softirq.c:372
softirqs last disabled at (298201): [<8024dff4>] do_softirq_own_stack include/asm-generic/softirq_stack.h:10 [inline]
softirqs last disabled at (298201): [<8024dff4>] invoke_softirq kernel/softirq.c:228 [inline]
softirqs last disabled at (298201): [<8024dff4>] __irq_exit_rcu+0x1d8/0x200 kernel/softirq.c:422
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(&(&pstats->syncp)->seq);
<Interrupt>
lock(&(&pstats->syncp)->seq);
*** DEADLOCK ***
1 lock held by udevd/4013:
#0: 82b09c5c (rcu_read_lock){....}-{1:2}, at: sk_filter_trim_cap+0x54/0x434 net/core/filter.c:139
stack backtrace:
CPU: 1 PID: 4013 Comm: udevd Not tainted 5.12.0-rc3-syzkaller #0
Hardware name: ARM-Versatile Express
Backtrace:
[<81802550>] (dump_backtrace) from [<818027c4>] (show_stack+0x18/0x1c arch/arm/kernel/traps.c:252)
r7:00000080 r6:600d0093 r5:00000000 r4:82b58344
[<818027ac>] (show_stack) from [<81809e98>] (__dump_stack lib/dump_stack.c:79 [inline])
[<818027ac>] (show_stack) from [<81809e98>] (dump_stack+0xb8/0xe8 lib/dump_stack.c:120)
[<81809de0>] (dump_stack) from [<81804a00>] (print_usage_bug.part.0+0x228/0x230 kernel/locking/lockdep.c:3806)
r7:86bcb768 r6:81a0326c r5:830f96a8 r4:86bcb0c0
[<818047d8>] (print_usage_bug.part.0) from [<802bb1b8>] (print_usage_bug kernel/locking/lockdep.c:3776 [inline])
[<818047d8>] (print_usage_bug.part.0) from [<802bb1b8>] (valid_state kernel/locking/lockdep.c:3818 [inline])
[<818047d8>] (print_usage_bug.part.0) from [<802bb1b8>] (mark_lock_irq kernel/locking/lockdep.c:4021 [inline])
[<818047d8>] (print_usage_bug.part.0) from [<802bb1b8>] (mark_lock.part.0+0xc34/0x136c kernel/locking/lockdep.c:4478)
r10:83278fe8 r9:82c6d748 r8:00000000 r7:82c6d2d4 r6:00000004 r5:86bcb768
r4:00000006
[<802ba584>] (mark_lock.part.0) from [<802bc644>] (mark_lock kernel/locking/lockdep.c:4442 [inline])
[<802ba584>] (mark_lock.part.0) from [<802bc644>] (mark_usage kernel/locking/lockdep.c:4391 [inline])
[<802ba584>] (mark_lock.part.0) from [<802bc644>] (__lock_acquire+0x9bc/0x3318 kernel/locking/lockdep.c:4854)
r10:86bcb768 r9:86bcb0c0 r8:00000001 r7:00040000 r6:0000075a r5:830f96a8
r4:00000000
[<802bbc88>] (__lock_acquire) from [<802bfb90>] (lock_acquire.part.0+0xf0/0x41c kernel/locking/lockdep.c:5510)
r10:00000000 r9:600d0013 r8:00000000 r7:00000000 r6:828a2680 r5:828a2680
r4:861e5bc8
[<802bfaa0>] (lock_acquire.part.0) from [<802bff28>] (lock_acquire+0x6c/0x74 kernel/locking/lockdep.c:5483)
r10:8146137c r9:00000000 r8:00000001 r7:00000000 r6:00000000 r5:00000000
r4:ff7c9dec
[<802bfebc>] (lock_acquire) from [<81381eb4>] (do_write_seqcount_begin_nested include/linux/seqlock.h:520 [inline])
[<802bfebc>] (lock_acquire) from [<81381eb4>] (do_write_seqcount_begin include/linux/seqlock.h:545 [inline])
[<802bfebc>] (lock_acquire) from [<81381eb4>] (u64_stats_update_begin include/linux/u64_stats_sync.h:129 [inline])
[<802bfebc>] (lock_acquire) from [<81381eb4>] (__bpf_prog_run_save_cb include/linux/filter.h:727 [inline])
[<802bfebc>] (lock_acquire) from [<81381eb4>] (bpf_prog_run_save_cb include/linux/filter.h:741 [inline])
[<802bfebc>] (lock_acquire) from [<81381eb4>] (sk_filter_trim_cap+0x26c/0x434 net/core/filter.c:149)
r10:a4095dd0 r9:ff7c9dd0 r8:e44be000 r7:8146137c r6:00000001 r5:8611ba80
r4:00000000
[<81381c48>] (sk_filter_trim_cap) from [<8146137c>] (sk_filter include/linux/filter.h:867 [inline])
[<81381c48>] (sk_filter_trim_cap) from [<8146137c>] (do_one_broadcast net/netlink/af_netlink.c:1468 [inline])
[<81381c48>] (sk_filter_trim_cap) from [<8146137c>] (netlink_broadcast_filtered+0x27c/0x4fc net/netlink/af_netlink.c:1520)
r10:00000001 r9:833d6b1c r8:00000000 r7:8572f864 r6:8611ba80 r5:8698d800
r4:8572f800
[<81461100>] (netlink_broadcast_filtered) from [<81463e60>] (netlink_broadcast net/netlink/af_netlink.c:1544 [inline])
[<81461100>] (netlink_broadcast_filtered) from [<81463e60>] (netlink_sendmsg+0x3d0/0x478 net/netlink/af_netlink.c:1925)
r10:00000000 r9:00000002 r8:8698d800 r7:000000b7 r6:8611b900 r5:861e5f50
r4:86aa3000
[<81463a90>] (netlink_sendmsg) from [<81321f54>] (sock_sendmsg_nosec net/socket.c:654 [inline])
[<81463a90>] (netlink_sendmsg) from [<81321f54>] (sock_sendmsg+0x3c/0x4c net/socket.c:674)
r10:00000000 r9:861e5dd4 r8:00000000 r7:86570000 r6:00000000 r5:86570000
r4:861e5f50
[<81321f18>] (sock_sendmsg) from [<813234d0>] (____sys_sendmsg+0x230/0x29c net/socket.c:2350)
r5:00000040 r4:861e5f50
[<813232a0>] (____sys_sendmsg) from [<8132549c>] (___sys_sendmsg+0xac/0xe4 net/socket.c:2404)
r10:00000128 r9:861e4000 r8:00000000 r7:00000000 r6:86570000 r5:861e5f50
r4:00000000
[<813253f0>] (___sys_sendmsg) from [<81325684>] (__sys_sendmsg net/socket.c:2433 [inline])
[<813253f0>] (___sys_sendmsg) from [<81325684>] (__do_sys_sendmsg net/socket.c:2442 [inline])
[<813253f0>] (___sys_sendmsg) from [<81325684>] (sys_sendmsg+0x58/0xa0 net/socket.c:2440)
r8:80200224 r7:00000128 r6:00000000 r5:7eaa541c r4:86570000
[<8132562c>] (sys_sendmsg) from [<80200060>] (ret_fast_syscall+0x0/0x2c arch/arm/mm/proc-v7.S:64)
Exception stack(0x861e5fa8 to 0x861e5ff0)
5fa0: 00000000 00000000 0000000c 7eaa541c 00000000 00000000
5fc0: 00000000 00000000 76fbf840 00000128 00000000 0000008f 7eaa541c 000563f8
5fe0: 00056110 7eaa53e0 00036cec 76c9bf44
r6:76fbf840 r5:00000000 r4:00000000
Fixes: 492ecee892c2 ("bpf: enable program stats")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211026214133.3114279-2-eric.dumazet@gmail.com
|
|
Running endpoint security solutions like Sentinel1 that use perf-based
tracing heavily lead to this repeated dump complaining about dockerd.
The default value of 2048 is nowhere near not large enough.
Using the prior patch "tracing: show size of requested buffer", we get
"perf buffer not large enough, wanted 6644, have 6144", after repeated
up-sizing (I did 2/4/6/8K). With 8K, the problem doesn't occur at all,
so below is the trace for 6K.
I'm wondering if this value should be selectable at boot time, but this
is a good starting point.
```
------------[ cut here ]------------
perf buffer not large enough, wanted 6644, have 6144
WARNING: CPU: 1 PID: 4997 at kernel/trace/trace_event_perf.c:402 perf_trace_buf_alloc+0x8c/0xa0
Modules linked in: [..]
CPU: 1 PID: 4997 Comm: sh Tainted: G T 5.13.13-x86_64-00039-gb3959163488e #63
Hardware name: LENOVO 20KH002JUS/20KH002JUS, BIOS N23ET66W (1.41 ) 09/02/2019
RIP: 0010:perf_trace_buf_alloc+0x8c/0xa0
Code: 80 3d 43 97 d0 01 00 74 07 31 c0 5b 5d 41 5c c3 ba 00 18 00 00 89 ee 48 c7 c7 00 82 7d 91 c6 05 25 97 d0 01 01 e8 22 ee bc 00 <0f> 0b 31 c0 eb db 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 55 89
RSP: 0018:ffffb922026b7d58 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff9da5ee012000 RCX: 0000000000000027
RDX: ffff9da881657828 RSI: 0000000000000001 RDI: ffff9da881657820
RBP: 00000000000019f4 R08: 0000000000000000 R09: ffffb922026b7b80
R10: ffffb922026b7b78 R11: ffffffff91dda688 R12: 000000000000000f
R13: ffff9da5ee012108 R14: ffff9da8816570a0 R15: ffffb922026b7e30
FS: 00007f420db1a080(0000) GS:ffff9da881640000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000060 CR3: 00000002504a8006 CR4: 00000000003706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
kprobe_perf_func+0x11e/0x270
? do_execveat_common.isra.0+0x1/0x1c0
? do_execveat_common.isra.0+0x5/0x1c0
kprobe_ftrace_handler+0x10e/0x1d0
0xffffffffc03aa0c8
? do_execveat_common.isra.0+0x1/0x1c0
do_execveat_common.isra.0+0x5/0x1c0
__x64_sys_execve+0x33/0x40
do_syscall_64+0x6b/0xc0
? do_syscall_64+0x11/0xc0
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f420dc1db37
Code: ff ff 76 e7 f7 d8 64 41 89 00 eb df 0f 1f 80 00 00 00 00 f7 d8 64 41 89 00 eb dc 0f 1f 84 00 00 00 00 00 b8 3b 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 01 43 0f 00 f7 d8 64 89 01 48
RSP: 002b:00007ffd4e8b4e38 EFLAGS: 00000246 ORIG_RAX: 000000000000003b
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f420dc1db37
RDX: 0000564338d1e740 RSI: 0000564338d32d50 RDI: 0000564338d28f00
RBP: 0000564338d28f00 R08: 0000564338d32d50 R09: 0000000000000020
R10: 00000000000001b6 R11: 0000000000000246 R12: 0000564338d28f00
R13: 0000564338d32d50 R14: 0000564338d1e740 R15: 0000564338d28c60
---[ end trace 83ab3e8e16275e49 ]---
```
Link: https://lkml.kernel.org/r/20210831043723.13481-2-robbat2@gentoo.org
Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
As the documentation explained, ftrace_test_recursion_trylock()
and ftrace_test_recursion_unlock() were supposed to disable and
enable preemption properly, however currently this work is done
outside of the function, which could be missing by mistake.
And since the internal using of trace_test_and_set_recursion()
and trace_clear_recursion() also require preemption disabled, we
can just merge the logical.
This patch will make sure the preemption has been disabled when
trace_test_and_set_recursion() return bit >= 0, and
trace_clear_recursion() will enable the preemption if previously
enabled.
Link: https://lkml.kernel.org/r/13bde807-779c-aa4c-0672-20515ae365ea@linux.alibaba.com
CC: Petr Mladek <pmladek@suse.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Jisheng Zhang <jszhang@kernel.org>
CC: Steven Rostedt <rostedt@goodmis.org>
CC: Miroslav Benes <mbenes@suse.cz>
Reported-by: Abaci <abaci@linux.alibaba.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Michael Wang <yun.wang@linux.alibaba.com>
[ Removed extra line in comment - SDR ]
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Two fixes:
* bridge vs. 4-addr mode check was wrong
* management frame registrations locking was
wrong, causing list corruption/crashes
====================
Link: https://lore.kernel.org/r/20211027143756.91711-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-next
Vinod writes:
phy-for-5.16
- New support:
- Kirin 970 PCIe PHY driver
- Qualcomm QCM2290 USB2 and USB3 support
- Updates:
- Qualcomm synopsis phy driver updates
- sc8180x PCIe update
- cadence-torrent driver updates for output reference clock
- stm32 phy tuning support
* tag 'phy-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (28 commits)
phy: Sparx5 Eth SerDes: Fix return value check in sparx5_serdes_probe()
phy: qcom-snps: Correct the FSEL_MASK
phy: hisilicon: Add of_node_put() in phy-hisi-inno-usb2
phy: qcom-qmp: another fix for the sc8180x PCIe definition
phy: cadence-torrent: Add support to output received reference clock
phy: cadence-torrent: Model reference clock driver as a clock to enable derived refclk
dt-bindings: phy: cadence-torrent: Add clock IDs for derived and received refclk
phy: cadence-torrent: Migrate to clk_hw based registration and OF APIs
phy: ti: gmii-sel: check of_get_address() for failure
dt-bindings: phy: qcom,qmp: IPQ6018 and IPQ8074 PCIe PHY require no supply
phy: stm32: add phy tuning support
dt-bindings: phy: phy-stm32-usbphyc: add optional phy tuning properties
phy: stm32: restore utmi switch on resume
dt-bindings: phy: rockchip: remove usb-phy fallback string for rk3066a/rk3188
phy: qcom-qusb2: Fix a memory leak on probe
phy: qcom-qmp: Add QCM2290 USB3 PHY support
dt-bindings: phy: qcom,qmp: Add QCM2290 USB3 PHY
phy: qcom-qusb2: Add missing vdd supply
dt-bindings: phy: qcom,qusb2: Add missing vdd-supply
phy: rockchip-inno-usb2: Make use of the helper function devm_add_action_or_reset()
...
|
|
The pin callback does not necessarily have to move the memory to system
memory, remove the sentence from the comment.
Link: https://lore.kernel.org/r/20211012120903.96933-2-galpress@amazon.com
Signed-off-by: Gal Pressman <galpress@amazon.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
To reduce code churn, the same patch makes multiple changes, since they
all touch the same lines:
1. The implementations for these two are identical, just with different
function pointers. Reduce duplications and name the function pointers
"mod_cb" instead of "add_cb" and "del_cb". Pass the event as argument.
2. Drop the "const" attribute from "orig_dev". If the driver needs to
check whether orig_dev belongs to itself and then
call_switchdev_notifiers(orig_dev, SWITCHDEV_FDB_OFFLOADED), it
can't, because call_switchdev_notifiers takes a non-const struct
net_device *.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Nobody cares about iov iterators state if we return -EIOCBQUEUED, so as
the we now have __blkdev_direct_IO_async(), which gets pages only once,
we can skip expensive iov_iter_advance(). It's around 1-2% of all CPU
spent.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/a6158edfbfa2ae3bc24aed29a72f035df18fad2f.1635337135.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Wire up the FAN_FS_ERROR event in the fanotify_mark syscall, allowing
user space to request the monitoring of FAN_FS_ERROR events.
These events are limited to filesystem marks, so check it is the
case in the syscall handler.
Link: https://lore.kernel.org/r/20211025192746.66445-29-krisman@collabora.com
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
The error info is a record sent to users on FAN_FS_ERROR events
documenting the type of error. It also carries an error count,
documenting how many errors were observed since the last reporting.
Link: https://lore.kernel.org/r/20211025192746.66445-28-krisman@collabora.com
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Pre-allocate slots for file system errors to have greater chances of
succeeding, since error events can happen in GFP_NOFS context. This
patch introduces a group-wide mempool of error events, shared by all
FAN_FS_ERROR marks in this group.
Link: https://lore.kernel.org/r/20211025192746.66445-20-krisman@collabora.com
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
FAN_FS_ERROR allows reporting of event type FS_ERROR to userspace, which
is a mechanism to report file system wide problems via fanotify. This
commit preallocate userspace visible bits to match the FS_ERROR event.
Link: https://lore.kernel.org/r/20211025192746.66445-19-krisman@collabora.com
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Expose a new type of fsnotify event for filesystems to report errors for
userspace monitoring tools. fanotify will send this type of
notification for FAN_FS_ERROR events. This also introduce a helper for
generating the new event.
Link: https://lore.kernel.org/r/20211025192746.66445-18-krisman@collabora.com
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Like inode events, FAN_FS_ERROR will require fid mode. Therefore,
convert the verification during fanotify_mark(2) to require fid for any
non-fd event. This means fid_mode will not only be required for inode
events, but for any event that doesn't provide a descriptor.
Link: https://lore.kernel.org/r/20211025192746.66445-17-krisman@collabora.com
Suggested-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
For group-wide mempool backed events, like FS_ERROR, the free_event
callback will need to reference the group's mempool to free the memory.
Wire that argument into the current callers.
Link: https://lore.kernel.org/r/20211025192746.66445-13-krisman@collabora.com
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
FAN_FS_ERROR allows events without inodes - i.e. for file system-wide
errors. Even though fsnotify_handle_inode_event is not currently used
by fanotify, this patch protects other backends from cases where neither
inode or dir are provided. Also document the constraints of the
interface (inode and dir cannot be both NULL).
Link: https://lore.kernel.org/r/20211025192746.66445-12-krisman@collabora.com
Suggested-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Some file system events (i.e. FS_ERROR) might not be associated with an
inode or directory. For these, we can retrieve the super block from the
data field. But, since the super_block is available in the data field
on every event type, simplify the code to always retrieve it from there,
through a new helper.
Link: https://lore.kernel.org/r/20211025192746.66445-11-krisman@collabora.com
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
fsnotify_add_event is growing in number of parameters, which in most
case are just passed a NULL pointer. So, split out a new
fsnotify_insert_event function to clean things up for users who don't
need an insert hook.
Link: https://lore.kernel.org/r/20211025192746.66445-10-krisman@collabora.com
Suggested-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Similarly to fanotify_is_perm_event and friends, provide a helper
predicate to say whether a mask is of an overflow event.
Link: https://lore.kernel.org/r/20211025192746.66445-9-krisman@collabora.com
Suggested-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Clarify argument names and contract for fsnotify_create() and
fsnotify_mkdir() to reflect the anomaly of kernfs, which leaves dentries
negavite after mkdir/create.
Remove the WARN_ON(!inode) in audit code that were added by the Fixes
commit under the wrong assumption that dentries cannot be negative after
mkdir/create.
Fixes: aa93bdc5500c ("fsnotify: use helpers to access data by data_type")
Link: https://lore.kernel.org/linux-fsdevel/87mtp5yz0q.fsf@collabora.com/
Link: https://lore.kernel.org/r/20211025192746.66445-4-krisman@collabora.com
Reviewed-by: Jan Kara <jack@suse.cz>
Reported-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Define a new data type to pass for event - FSNOTIFY_EVENT_DENTRY.
Use it to pass the dentry instead of it's ->d_inode where available.
This is needed in preparation to the refactor to retrieve the super
block from the data field. In some cases (i.e. mkdir in kernfs), the
data inode comes from a negative dentry, such that no super block
information would be available. By receiving the dentry itself, instead
of the inode, fsnotify can derive the super block even on these cases.
Link: https://lore.kernel.org/r/20211025192746.66445-3-krisman@collabora.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
[Expand explanation in commit message]
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Align the arguments of fsnotify_name() to those of fsnotify().
Link: https://lore.kernel.org/r/20211025192746.66445-2-krisman@collabora.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
When using -ffunction-sections to place each function in its own text
section (so it can be randomized at load time in the future FGKASLR
series), the linker will place most of the functions into separate .text.*
sections. SIZEOF(.text) won't work here for calculating the ORC lookup
table size, so the total text size must be calculated to include .text
AND all .text.* sections.
Signed-off-by: Kristen Carlson Accardi <kristen@linux.intel.com>
[ alobakin: move it to vmlinux.lds.h and make arch-indep ]
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Link: https://lore.kernel.org/r/20211013175742.1197608-5-keescook@chromium.org
|
|
The early malloc() and free() implementation in include/linux/decompress/mm.h
(which is also included by the static decompressors) is static. This is
fine when the only thing interested in using malloc() is the decompression
code, but the x86 early boot environment may use malloc() in a couple places,
leading to a potential collision when the static copies of the available
memory region ("malloc_ptr") gets reset to the global "free_mem_ptr" value.
As it happened, the existing usage pattern was accidentally safe because each
user did 1 malloc() and 1 free() before returning and were not nested:
extract_kernel() (misc.c)
choose_random_location() (kaslr.c)
mem_avoid_init()
handle_mem_options()
malloc()
...
free()
...
parse_elf() (misc.c)
malloc()
...
free()
Once the future FGKASLR series is added, however, it will insert
additional malloc() calls local to fgkaslr.c in the middle of
parse_elf()'s malloc()/free() pair:
parse_elf() (misc.c)
malloc()
if (...) {
layout_randomized_image(output, &ehdr, phdrs);
malloc() <- boom
...
else
layout_image(output, &ehdr, phdrs);
free()
To avoid collisions, there must be a single implementation of malloc().
Adjust include/linux/decompress/mm.h so that visibility can be
controlled, provide prototypes in misc.h, and implement the functions in
misc.c. This also results in a small size savings:
$ size vmlinux.before vmlinux.after
text data bss dec hex filename
8842314 468 178320 9021102 89a6ae vmlinux.before
8842240 468 178320 9021028 89a664 vmlinux.after
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20211013175742.1197608-4-keescook@chromium.org
|
|
Player LEDs are commonly found on game controllers from Nintendo and Sony
to indicate a player ID across a number of LEDs. For example, "Player 2"
might be indicated as "-x--" on a device with 4 LEDs where "x" means on.
This patch introduces LED_FUNCTION_PLAYER1-5 defines to properly indicate
player LEDs from the kernel. Until now there was no good standard, which
resulted in inconsistent behavior across xpad, hid-sony, hid-wiimote and
other drivers. Moving forward new drivers should use LED_FUNCTION_PLAYERx.
Note: management of Player IDs is left to user space, though a kernel
driver may pick a default value.
Signed-off-by: Roderick Colenbrander <roderick.colenbrander@sony.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
TP8014 adds a new SUBTYPE value and a new field EFLAGS for the
discovery log page entry.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
Add support to discover if an ATA device supports the Concurrent
Positioning Ranges data log (address 0x47), indicating that the device
is capable of seeking to multiple different locations in parallel using
multiple actuators serving different LBA ranges.
Also add support to translate the concurrent positioning ranges log
into its equivalent Concurrent Positioning Ranges VPD page B9h in
libata-scsi.c.
The format of the Concurrent Positioning Ranges Log is defined in ACS-5
r9.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20211027022223.183838-4-damien.lemoal@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The Concurrent Positioning Ranges VPD page (for SCSI) and data log page
(for ATA) contain parameters describing the set of contiguous LBAs that
can be served independently by a single LUN multi-actuator hard-disk.
Similarly, a logically defined block device composed of multiple disks
can in some cases execute requests directed at different sector ranges
in parallel. A dm-linear device aggregating 2 block devices together is
an example.
This patch implements support for exposing a block device independent
access ranges to the user through sysfs to allow optimizing device
accesses to increase performance.
To describe the set of independent sector ranges of a device (actuators
of a multi-actuator HDDs or table entries of a dm-linear device),
The type struct blk_independent_access_ranges is introduced. This
structure describes the sector ranges using an array of
struct blk_independent_access_range structures. This range structure
defines the start sector and number of sectors of the access range.
The ranges in the array cannot overlap and must contain all sectors
within the device capacity.
The function disk_set_independent_access_ranges() allows a device
driver to signal to the block layer that a device has multiple
independent access ranges. In this case, a struct
blk_independent_access_ranges is attached to the device request queue
by the function disk_set_independent_access_ranges(). The function
disk_alloc_independent_access_ranges() is provided for drivers to
allocate this structure.
struct blk_independent_access_ranges contains kobjects (struct kobject)
to expose to the user through sysfs the set of independent access ranges
supported by a device. When the device is initialized, sysfs
registration of the ranges information is done from blk_register_queue()
using the block layer internal function
disk_register_independent_access_ranges(). If a driver calls
disk_set_independent_access_ranges() for a registered queue, e.g. when a
device is revalidated, disk_set_independent_access_ranges() will execute
disk_register_independent_access_ranges() to update the sysfs attribute
files. The sysfs file structure created starts from the
independent_access_ranges sub-directory and contains the start sector
and number of sectors of each range, with the information for each range
grouped in numbered sub-directories.
E.g. for a dual actuator HDD, the user sees:
$ tree /sys/block/sdk/queue/independent_access_ranges/
/sys/block/sdk/queue/independent_access_ranges/
|-- 0
| |-- nr_sectors
| `-- sector
`-- 1
|-- nr_sectors
`-- sector
For a regular device with a single access range, the
independent_access_ranges sysfs directory does not exist.
Device revalidation may lead to changes to this structure and to the
attribute values. When manipulated, the queue sysfs_lock and
sysfs_dir_lock mutexes are held for atomicity, similarly to how the
blk-mq and elevator sysfs queue sub-directories are protected.
The code related to the management of independent access ranges is
added in the new file block/blk-ia-ranges.c.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20211027022223.183838-2-damien.lemoal@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
This patch adds the new CQE SHAMPO fields:
- flush: indicates that we must close the current session and pass the SKB
to the network stack.
- match: indicates that the current packet matches the oppened session,
the packet will be merge into the current SKB.
- header_size: the size of the packet headers that written into the headers
buffer.
- header_entry_index: the entry index in the headers buffer.
- data_offset: packets data offset in the WQE.
Also new cqe handler is added to handle SHAMPO packets:
- The new handler uses CQE SHAMPO fields to build the SKB.
CQE's Flush and match fields are not used in this patch, packets are not
merged in this patch.
Signed-off-by: Khalid Manaa <khalidm@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
This commit adds the needed definitions for using the klm_umr_wqe.
UMR stands for user-mode memory registration, is a mechanism to alter
address translation properties of MKEY by posting WorkQueueElement
aka WQE on send queue.
MKEY stands for memory key, MKEY are used to describe a region in memory that
can be later used by HW.
KLM stands for {Key, Length, MemVa}, KLM_MKEY is indirect MKEY that enables
to map multiple memory spaces with different sizes in unified MKEY.
klm_umr_wqe is a UMR that use to update a KLM_MKEY.
SHAMPO feature uses KLM_MKEY for memory registration of his header buffer.
Signed-off-by: Ben Ben-Ishay <benishay@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
This series introduces new packet merge type, therefore rename lro
functions to packet merge to support the new merge type:
- Generalize + rename mlx5e_build_tir_ctx_lro to
mlx5e_build_tir_ctx_packet_merge.
- Rename mlx5e_modify_tirs_lro to mlx5e_modify_tirs_packet_merge.
- Rename lro bit in mlx5_ifc_modify_tir_bitmask_bits to packet_merge.
- Rename lro_en in mlx5e_params to packet_merge_type type and combine
packet_merge params into one struct mlx5e_packet_merge_param.
Signed-off-by: Khalid Manaa <khalidm@nvidia.com>
Signed-off-by: Ben Ben-Ishay <benishay@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
This commit adds SHAMPO bit to hca_cap and SHAMPO capabilities structure,
SHAMPO related HW spec hardware fields and enumerations.
SHAMPO stands for: split headers and merge payload offload.
SHAMPO new fields:
WQ:
- headers_mkey: mkey that represents the headers buffer, where the packets
headers will be written by the HW.
- shampo_enable: flag to verify if the WQ supports SHAMPO feature.
- log_reservation_size: the log of the reservation size where the data of
the packet will be written by the HW.
- log_max_num_of_packets_per_reservation: log of the maximum number of
packets that can be written to the same reservation.
- log_headers_entry_size: log of the header entry size of the headers buffer.
- log_headers_buffer_entry_num: log of the entries number of the headers buffer.
RQ:
- shampo_no_match_alignment_granularity: the HW alignment granularity
in case the received packet doesn't match the current session.
- shampo_match_criteria_type: the type of match criteria.
- reservation_timeout: the maximum time that the HW will hold the
reservation.
mlx5_ifc_shampo_cap_bits, the capabilities of the SHAMPO feature:
- shampo_log_max_reservation_size: the maximum allowed value of the field
WQ.log_reservation_size.
- log_reservation_size: the minimum allowed value of the field
WQ.log_reservation_size.
- shampo_min_mss_size: the minimum payload size of packet that can open
a new session or be merged to a session.
- shampo_max_log_headers_entry_size: the maximum allowed value of the field
WQ.log_headers_entry_size
Signed-off-by: Ben Ben-Ishay <benishay@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
TIR stands for transport interface receive, the TIR object is
responsible for performing all transport related operations on
the receive side like packet processing, demultiplexing the packets
to different RQ's, etc.
lro_timeout is a field in the TIR that is used to set the timeout for lro
session, this series introduces new packet merge type, therefore rename
lro_timeout to packet_merge_timeout for all packet merge types.
Signed-off-by: Ben Ben-Ishay <benishay@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
Expose new node-aware API for bitmap allocation:
bitmap_alloc_node() / bitmap_zalloc_node().
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
This rewrites the ux500/u8500 clock bindings in YAML schema and extends them
with the PRCC reset controller.
The bindings are a bit idiomatic but it just reflects their age, the ux500
platform was used as guinea pig for early device tree conversion of platforms
in 2015. The new subnode for the reset controller follows the pattern of the
old bindings and adds a node with reset-cells for this.
Cc: devicetree@vger.kernel.org
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210921184803.1757916-1-linus.walleij@linaro.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
|
|
The core gpiolib code is able to deal with multiple interrupt parents
for a single gpio irqchip. It however only allows a single piece
of data to be conveyed to all flow handlers (either the gpio_chip
or some other, driver-specific data).
This means that drivers have to go through some interesting dance
to find the correct context, something that isn't great in interrupt
context (see aebdc8abc9db86e2bd33070fc2f961012fff74b4 for a prime
example).
Instead, offer an optional way for a pinctrl/gpio driver to provide
an array of pointers which gets used to provide the correct context
to the flow handler.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Joey Gouly <joey.gouly@arm.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20211026175815.52703-2-joey.gouly@arm.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Daniel Borkmann says:
====================
pull-request: bpf 2021-10-26
We've added 12 non-merge commits during the last 7 day(s) which contain
a total of 23 files changed, 118 insertions(+), 98 deletions(-).
The main changes are:
1) Fix potential race window in BPF tail call compatibility check, from Toke Høiland-Jørgensen.
2) Fix memory leak in cgroup fs due to missing cgroup_bpf_offline(), from Quanyang Wang.
3) Fix file descriptor reference counting in generic_map_update_batch(), from Xu Kuohai.
4) Fix bpf_jit_limit knob to the max supported limit by the arch's JIT, from Lorenz Bauer.
5) Fix BPF sockmap ->poll callbacks for UDP and AF_UNIX sockets, from Cong Wang and Yucong Sun.
6) Fix BPF sockmap concurrency issue in TCP on non-blocking sendmsg calls, from Liu Jian.
7) Fix build failure of INODE_STORAGE and TASK_STORAGE maps on !CONFIG_NET, from Tejun Heo.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Fix potential race in tail call compatibility check
bpf: Move BPF_MAP_TYPE for INODE_STORAGE and TASK_STORAGE outside of CONFIG_NET
selftests/bpf: Use recv_timeout() instead of retries
net: Implement ->sock_is_readable() for UDP and AF_UNIX
skmsg: Extract and reuse sk_msg_is_readable()
net: Rename ->stream_memory_read to ->sock_is_readable
tcp_bpf: Fix one concurrency problem in the tcp_bpf_send_verdict function
cgroup: Fix memory leak caused by missing cgroup_bpf_offline
bpf: Fix error usage of map_fd and fdget() in generic_map_update_batch()
bpf: Prevent increasing bpf_jit_limit above max
bpf: Define bpf_jit_alloc_exec_limit for arm64 JIT
bpf: Define bpf_jit_alloc_exec_limit for riscv JIT
====================
Link: https://lore.kernel.org/r/20211026201920.11296-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit 3c62be17d4f5 ("f2fs: support multiple devices") missed
to support direct IO for multiple device feature, this patch
adds to support the missing part of multidevice feature.
In addition, for multiple device image, we should be aware of
any issued direct write IO rather than just buffered write IO,
so that fsync and syncfs can issue a preflush command to the
device where direct write IO goes, to persist user data for
posix compliant.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Lorenzo noticed that the code testing for program type compatibility of
tail call maps is potentially racy in that two threads could encounter a
map with an unset type simultaneously and both return true even though they
are inserting incompatible programs.
The race window is quite small, but artificially enlarging it by adding a
usleep_range() inside the check in bpf_prog_array_compatible() makes it
trivial to trigger from userspace with a program that does, essentially:
map_fd = bpf_create_map(BPF_MAP_TYPE_PROG_ARRAY, 4, 4, 2, 0);
pid = fork();
if (pid) {
key = 0;
value = xdp_fd;
} else {
key = 1;
value = tc_fd;
}
err = bpf_map_update_elem(map_fd, &key, &value, 0);
While the race window is small, it has potentially serious ramifications in
that triggering it would allow a BPF program to tail call to a program of a
different type. So let's get rid of it by protecting the update with a
spinlock. The commit in the Fixes tag is the last commit that touches the
code in question.
v2:
- Use a spinlock instead of an atomic variable and cmpxchg() (Alexei)
v3:
- Put lock and the members it protects into an embedded 'owner' struct (Daniel)
Fixes: 3324b584b6f6 ("ebpf: misc core cleanup")
Reported-by: Lorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211026110019.363464-1-toke@redhat.com
|
|
bpf_types.h has BPF_MAP_TYPE_INODE_STORAGE and BPF_MAP_TYPE_TASK_STORAGE
declared inside #ifdef CONFIG_NET although they are built regardless of
CONFIG_NET. So, when CONFIG_BPF_SYSCALL && !CONFIG_NET, they are built
without the declarations leading to spurious build failures and not
registered to bpf_map_types making them unavailable.
Fix it by moving the BPF_MAP_TYPE for the two map types outside of
CONFIG_NET.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: a10787e6d58c ("bpf: Enable task local storage for tracing programs")
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/YXG1cuuSJDqHQfRY@slm.duckdns.org
|
|
tcp_bpf_sock_is_readable() is pretty much generic,
we can extract it and reuse it for non-TCP sockets.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211008203306.37525-3-xiyou.wangcong@gmail.com
|
|
The proto ops ->stream_memory_read() is currently only used
by TCP to check whether psock queue is empty or not. We need
to rename it before reusing it for non-TCP protocols, and
adjust the exsiting users accordingly.
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211008203306.37525-2-xiyou.wangcong@gmail.com
|
|
revert commit 46ae40b94d88 ("net/mlx5: Let user configure io_eq_size param")
revert commit a6cb08daa3b4 ("net/mlx5: Let user configure event_eq_size param")
revert commit 554604061979 ("net/mlx5: Let user configure max_macs param")
The EQE parameters are applicable to more drivers, they should
be configured via standard API, probably ethtool. Example of
another driver needing something similar:
https://lore.kernel.org/all/1633454136-14679-3-git-send-email-sbhatta@marvell.com/
The last param for "max_macs" is probably fine but the documentation
is severely lacking. The meaning and implications for changing the
param need to be stated.
Link: https://lore.kernel.org/r/20211026152939.3125950-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
