| Age | Commit message (Collapse) | Author |
|---|
|
Let's introduce the basics for advertizing discovered PANs and
coordinators, which is:
- A new "scan" netlink message group.
- A couple of netlink command/attribute.
- The main netlink helper to send a netlink message with all the
necessary information to forward the main information to the user.
Two netlink attributes are proactively added to support future UWB
complex channels, but are not actually used yet.
Co-developed-by: David Girault <david.girault@qorvo.com>
Signed-off-by: David Girault <david.girault@qorvo.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20221129135535.532513-2-miquel.raynal@bootlin.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
for-6.2/block
Pull NVMe updates from Christoph:
"nvme updates for Linux 6.2
- support some passthrough commands without CAP_SYS_ADMIN
(Kanchan Joshi)
- refactor PCIe probing and reset (Christoph Hellwig)
- various fabrics authentication fixes and improvements (Sagi Grimberg)
- avoid fallback to sequential scan due to transient issues
(Uday Shankar)
- implement support for the DEAC bit in Write Zeroes (Christoph Hellwig)
- allow overriding the IEEE OUI and firmware revision in configfs for
nvmet (Aleksandr Miloserdov)
- force reconnect when number of queue changes in nvmet (Daniel Wagner)
- minor fixes and improvements (Uros Bizjak, Joel Granados,
Sagi Grimberg, Christoph Hellwig, Christophe JAILLET)"
* tag 'nvme-6.2-2022-11-29' of git://git.infradead.org/nvme: (45 commits)
nvmet: expose firmware revision to configfs
nvmet: expose IEEE OUI to configfs
nvme: rename the queue quiescing helpers
nvmet: fix a memory leak in nvmet_auth_set_key
nvme: return err on nvme_init_non_mdts_limits fail
nvme: avoid fallback to sequential scan due to transient issues
nvme-rdma: stop auth work after tearing down queues in error recovery
nvme-tcp: stop auth work after tearing down queues in error recovery
nvme-auth: have dhchap_auth_work wait for queues auth to complete
nvme-auth: remove redundant auth_work flush
nvme-auth: convert dhchap_auth_list to an array
nvme-auth: check chap ctrl_key once constructed
nvme-auth: no need to reset chap contexts on re-authentication
nvme-auth: remove redundant deallocations
nvme-auth: clear sensitive info right after authentication completes
nvme-auth: guarantee dhchap buffers under memory pressure
nvme-auth: don't keep long lived 4k dhchap buffer
nvme-auth: remove redundant if statement
nvme-auth: don't override ctrl keys before validation
nvme-auth: don't ignore key generation failures when initializing ctrl keys
...
|
|
Add support for configuring sp and hs DAI from topology.
Signed-off-by: V sujith kumar Reddy <Vsujithkumar.Reddy@amd.com>
Link: https://lore.kernel.org/r/20221129100102.826781-1-vsujithkumar.reddy@amd.corp-partner.google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge the fixes branch up so we can apply further AMD work.
|
|
Introduce reset parameter to mtk_wed_tx_ring_setup signature.
This is a preliminary patch to add Wireless Ethernet Dispatcher reset
support.
Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Update mtk_wed_stop routine and rename old mtk_wed_stop() to
mtk_wed_deinit(). This is a preliminary patch to add Wireless Ethernet
Dispatcher reset support.
Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Export
of_get_mac_addr_nvmem()
and rename it to
of_get_mac_address_nvmem()
in order to fit the convention followed by the existing exported helpers
of the same kind.
This way, OF compatible drivers using eg. fwnode_get_mac_address() can
do a direct call to it instead of calling of_get_mac_address() just for
the nvmem step, avoiding to repeat an expensive DT lookup which has
already been done once.
Eventually, fwnode_get_mac_address() should probably be updated to
perform the nvmem lookup directly, but as of today, nvmem cells seem not
to be supported by ACPI yet which would defeat this kind of extension.
Suggested-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
====================
bpf-next 2022-11-25
We've added 101 non-merge commits during the last 11 day(s) which contain
a total of 109 files changed, 8827 insertions(+), 1129 deletions(-).
The main changes are:
1) Support for user defined BPF objects: the use case is to allocate own
objects, build own object hierarchies and use the building blocks to
build own data structures flexibly, for example, linked lists in BPF,
from Kumar Kartikeya Dwivedi.
2) Add bpf_rcu_read_{,un}lock() support for sleepable programs,
from Yonghong Song.
3) Add support storing struct task_struct objects as kptrs in maps,
from David Vernet.
4) Batch of BPF map documentation improvements, from Maryam Tahhan
and Donald Hunter.
5) Improve BPF verifier to propagate nullness information for branches
of register to register comparisons, from Eduard Zingerman.
6) Fix cgroup BPF iter infra to hold reference on the start cgroup,
from Hou Tao.
7) Fix BPF verifier to not mark fentry/fexit program arguments as trusted
given it is not the case for them, from Alexei Starovoitov.
8) Improve BPF verifier's realloc handling to better play along with dynamic
runtime analysis tools like KASAN and friends, from Kees Cook.
9) Remove legacy libbpf mode support from bpftool,
from Sahid Orentino Ferdjaoui.
10) Rework zero-len skb redirection checks to avoid potentially breaking
existing BPF test infra users, from Stanislav Fomichev.
11) Two small refactorings which are independent and have been split out
of the XDP queueing RFC series, from Toke Høiland-Jørgensen.
12) Fix a memory leak in LSM cgroup BPF selftest, from Wang Yufen.
13) Documentation on how to run BPF CI without patch submission,
from Daniel Müller.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
====================
Link: https://lore.kernel.org/r/20221125012450.441-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into devel
intel-pinctrl for v6.2-2
* Enable PWM feature on Intel pin control IPs
The following is an automated git shortlog grouped by driver:
intel:
- Enumerate PWM device when community has a capability
pwm:
- lpss: Rename pwm_lpss_probe() --> devm_pwm_lpss_probe()
- lpss: Allow other drivers to enable PWM LPSS
- lpss: Include headers we are the direct user of
- lpss: Rename MAX_PWMS --> LPSS_MAX_PWMS
- Add a stub for devm_pwmchip_add()
|
|
Clean up after commit 22700f3c6df5 ("SUNRPC: Improve ordering of
transport processing").
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
|
|
Microsoft Hypervisor root partition has to map the TSC page specified
by the hypervisor, instead of providing the page to the hypervisor like
it's done in the guest partitions.
However, it's too early to map the page when the clock is initialized, so, the
actual mapping is happening later.
Signed-off-by: Stanislav Kinsburskiy <stanislav.kinsburskiy@gmail.com>
CC: "K. Y. Srinivasan" <kys@microsoft.com>
CC: Haiyang Zhang <haiyangz@microsoft.com>
CC: Wei Liu <wei.liu@kernel.org>
CC: Dexuan Cui <decui@microsoft.com>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Ingo Molnar <mingo@redhat.com>
CC: Borislav Petkov <bp@alien8.de>
CC: Dave Hansen <dave.hansen@linux.intel.com>
CC: x86@kernel.org
CC: "H. Peter Anvin" <hpa@zytor.com>
CC: Daniel Lezcano <daniel.lezcano@linaro.org>
CC: linux-hyperv@vger.kernel.org
CC: linux-kernel@vger.kernel.org
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com>
Link: https://lore.kernel.org/r/166759443644.385891.15921594265843430260.stgit@skinsburskii-cloud-desktop.internal.cloudapp.net
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Instead of converting the virtual address to physical directly.
This is a precursor patch for the upcoming support for TSC page mapping into
Microsoft Hypervisor root partition, where TSC PFN will be defined by the
hypervisor and thus can't be obtained by linear translation of the physical
address.
Signed-off-by: Stanislav Kinsburskiy <stanislav.kinsburskiy@gmail.com>
CC: Andy Lutomirski <luto@kernel.org>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Ingo Molnar <mingo@redhat.com>
CC: Borislav Petkov <bp@alien8.de>
CC: Dave Hansen <dave.hansen@linux.intel.com>
CC: x86@kernel.org
CC: "H. Peter Anvin" <hpa@zytor.com>
CC: "K. Y. Srinivasan" <kys@microsoft.com>
CC: Haiyang Zhang <haiyangz@microsoft.com>
CC: Wei Liu <wei.liu@kernel.org>
CC: Dexuan Cui <decui@microsoft.com>
CC: Daniel Lezcano <daniel.lezcano@linaro.org>
CC: linux-kernel@vger.kernel.org
CC: linux-hyperv@vger.kernel.org
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Reviewed-by: Anirudh Rayabharam <anrayabh@linux.microsoft.com>
Link: https://lore.kernel.org/r/166749833939.218190.14095015146003109462.stgit@skinsburskii-cloud-desktop.internal.cloudapp.net
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
morev vs. more.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Link: https://lore.kernel.org/r/20221105115401.21592-1-olaf@aepfle.de
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
The Hyper-V framebuffer code registers a panic notifier in order
to try updating its fbdev if the kernel crashed. The notifier
callback is straightforward, but it calls the vmbus_sendpacket()
routine eventually, and such function takes a spinlock for the
ring buffer operations.
Panic path runs in atomic context, with local interrupts and
preemption disabled, and all secondary CPUs shutdown. That said,
taking a spinlock might cause a lockup if a secondary CPU was
disabled with such lock taken. Fix it here by checking if the
ring buffer spinlock is busy on Hyper-V framebuffer panic notifier;
if so, bail-out avoiding the potential lockup scenario.
Cc: Andrea Parri (Microsoft) <parri.andrea@gmail.com>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Michael Kelley <mikelley@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Tianyu Lan <Tianyu.Lan@microsoft.com>
Cc: Wei Liu <wei.liu@kernel.org>
Tested-by: Fabio A M Martins <fabiomirmar@gmail.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20220819221731.480795-10-gpiccoli@igalia.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
The vast majority of the current users of the SoundWire framework
have almost identical code for converting from hw_params to SoundWire
configuration. Whilst complex devices might require more, it is very
likely that most new devices will follow the same pattern. Save a
little code by factoring this out into a helper function.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221123165432.594972-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
All wed versions should enable the wcid overwritten feature,
since the wcid size is controlled by the wlan driver.
Tested-by: Sujuan Chen <sujuan.chen@mediatek.com>
Co-developed-by: Bo Jiao <bo.jiao@mediatek.com>
Signed-off-by: Bo Jiao <bo.jiao@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-fixes-2022-11-24
This series provides bug fixes to mlx5 driver.
Focusing on error handling and proper memory management in mlx5, in
general and in the newly added macsec module.
I still have few fixes left in my queue and I hope those will be the
last ones for mlx5 for this cycle.
Please pull and let me know if there is any problem.
Happy thanksgiving.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
POSIX typically only refreshes the user's supplementary group
information upon login. Since NFS servers may often refresh their
concept of the user supplementary group membership at their own cadence,
it is possible for the NFS client's access cache to become stale due to
the user's group membership changing on the server after the user has
already logged in on the client.
While it is reasonable to expect that such group membership changes are
rare, and that we do not want to optimise the cache to accommodate them,
it is also not unreasonable for the user to expect that if they log out
and log back in again, that the staleness would clear up.
Reviewed-by: Benjamin Coddington <bcodding@redhat.com>
Tested-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
SLAB_RECLAIM_ACCOUNT caches allocate their slab pages with
__GFP_RECLAIMABLE and can help against fragmentation by grouping pages
by mobility, but on tiny systems mobility grouping is likely disabled
anyway and ignoring SLAB_RECLAIM_ACCOUNT might instead lead to merging
of caches that are made incompatible just by the flag.
Thus with CONFIG_SLUB_TINY, make SLAB_RECLAIM_ACCOUNT ineffective.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Christoph Lameter <cl@linux.com>
|
|
Distinguishing kmalloc(__GFP_RECLAIMABLE) can help against fragmentation
by grouping pages by mobility, but on tiny systems the extra memory
overhead of separate set of kmalloc-rcl caches will probably be worse,
and mobility grouping likely disabled anyway.
Thus with CONFIG_SLUB_TINY, don't create kmalloc-rcl caches and use the
regular ones.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Christoph Lameter <cl@linux.com>
|
|
Currently SLUB enables its sysfs support depending unconditionally on
the general CONFIG_SYSFS setting. To reduce the configuration
combination space, make CONFIG_SLUB_TINY disable SLUB's sysfs support by
reusing the existing SLAB_SUPPORTS_SYSFS define. It is unlikely that
real tiny systems would combine CONFIG_SLUB_TINY with CONFIG_SYSFS, but
a randconfig might.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Christoph Lameter <cl@linux.com>
|
|
With CONFIG_HARDENED_USERCOPY not enabled, there are no
__check_heap_object() checks happening that would use the struct
kmem_cache useroffset and usersize fields. Yet the fields are still
initialized, preventing merging of otherwise compatible caches.
Also the fields contribute to struct kmem_cache size unnecessarily when
unused. Thus #ifdef them out completely when CONFIG_HARDENED_USERCOPY is
disabled. In kmem_dump_obj() print object_size instead of usersize, as
that's actually the intention.
In a quick virtme boot test, this has reduced the number of caches in
/proc/slabinfo from 131 to 111.
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Roman Gushchin <roman.gushchin@linux.dev>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Christoph Lameter <cl@linux.com>
|
|
Pull vfs fix from Al Viro:
"Amir's copy_file_range() fix"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vfs: fix copy_file_range() averts filesystem freeze protection
|
|
Pull kvm fixes from Paolo Bonzini:
"x86:
- Fixes for Xen emulation. While nobody should be enabling it in the
kernel (the only public users of the feature are the selftests),
the bug effectively allows userspace to read arbitrary memory.
- Correctness fixes for nested hypervisors that do not intercept INIT
or SHUTDOWN on AMD; the subsequent CPU reset can cause a
use-after-free when it disables virtualization extensions. While
downgrading the panic to a WARN is quite easy, the full fix is a
bit more laborious; there are also tests. This is the bulk of the
pull request.
- Fix race condition due to incorrect mmu_lock use around
make_mmu_pages_available().
Generic:
- Obey changes to the kvm.halt_poll_ns module parameter in VMs not
using KVM_CAP_HALT_POLL, restoring behavior from before the
introduction of the capability"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: Update gfn_to_pfn_cache khva when it moves within the same page
KVM: x86/xen: Only do in-kernel acceleration of hypercalls for guest CPL0
KVM: x86/xen: Validate port number in SCHEDOP_poll
KVM: x86/mmu: Fix race condition in direct_page_fault
KVM: x86: remove exit_int_info warning in svm_handle_exit
KVM: selftests: add svm part to triple_fault_test
KVM: x86: allow L1 to not intercept triple fault
kvm: selftests: add svm nested shutdown test
KVM: selftests: move idt_entry to header
KVM: x86: forcibly leave nested mode on vCPU reset
KVM: x86: add kvm_leave_nested
KVM: x86: nSVM: harden svm_free_nested against freeing vmcb02 while still in use
KVM: x86: nSVM: leave nested mode on vCPU free
KVM: Obey kvm.halt_poll_ns in VMs not using KVM_CAP_HALT_POLL
KVM: Avoid re-reading kvm->max_halt_poll_ns during halt-polling
KVM: Cap vcpu->halt_poll_ns before halting rather than after
|
|
Merge series from Eddie James <eajames@linux.ibm.com>:
The SBEFIFO hardware can now be attached over a new I2C endpoint interface
called the I2C Responder (I2CR). In order to use the existing SBEFIFO
driver, add a regmap driver for the FSI bus and an endpoint driver for the
I2CR. Then, refactor the SBEFIFO and OCC drivers to clean up and use the
new regmap driver or the I2CR interface.
This branch just has the regmap change so it can be shared with the FSI
code.
|
|
Merge series from Maarten Zanders <maarten.zanders@mind.be>:
A collection of fixes and improvements for the adau1372 driver.
|
|
INT_LIMIT() tries to do what type_max() does, except that type_max()
doesn't rely upon undefined behaviour[*], might as well use type_max()
instead.
[*] if T is an N-bit signed integer type, the maximal value in T is
pow(2, N - 1) - 1, all right, but naive expression for that value
ends up with a couple of wraparounds and as usual for wraparounds
in signed types, that's an undefined behaviour. type_max() takes
care to avoid those...
Caught-by: UBSAN
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Add regmap support for the FSI bus.
Signed-off-by: Eddie James <eajames@linux.ibm.com>
Link: https://lore.kernel.org/r/20221102205148.1334459-2-eajames@linux.ibm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Linux 6.1-rc4 which should get my CI working on RPi3s again.
|
|
Linux 6.1-rc4 which should get my CI working on RPi3s again.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton:
"24 MM and non-MM hotfixes. 8 marked cc:stable and 16 for post-6.0
issues.
There have been a lot of hotfixes this cycle, and this is quite a
large batch given how far we are into the -rc cycle. Presumably a
reflection of the unusually large amount of MM material which went
into 6.1-rc1"
* tag 'mm-hotfixes-stable-2022-11-24' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (24 commits)
test_kprobes: fix implicit declaration error of test_kprobes
nilfs2: fix nilfs_sufile_mark_dirty() not set segment usage as dirty
mm/cgroup/reclaim: fix dirty pages throttling on cgroup v1
mm: fix unexpected changes to {failslab|fail_page_alloc}.attr
swapfile: fix soft lockup in scan_swap_map_slots
hugetlb: fix __prep_compound_gigantic_page page flag setting
kfence: fix stack trace pruning
proc/meminfo: fix spacing in SecPageTables
mm: multi-gen LRU: retry folios written back while isolated
mailmap: update email address for Satya Priya
mm/migrate_device: return number of migrating pages in args->cpages
kbuild: fix -Wimplicit-function-declaration in license_is_gpl_compatible
MAINTAINERS: update Alex Hung's email address
mailmap: update Alex Hung's email address
mm: mmap: fix documentation for vma_mas_szero
mm/damon/sysfs-schemes: skip stats update if the scheme directory is removed
mm/memory: return vm_fault_t result from migrate_to_ram() callback
mm: correctly charge compressed memory to its memcg
ipc/shm: call underlying open/close vm_ops
gcov: clang: fix the buffer overflow issue
...
|
|
READ/WRITE proved to be actively confusing - the meanings are
"data destination, as used with read(2)" and "data source, as
used with write(2)", but people keep interpreting those as
"we read data from it" and "we write data to it", i.e. exactly
the wrong way.
Call them ITER_DEST and ITER_SOURCE - at least that is harder
to misinterpret...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A few more last-minute fixes for 6.1 that have been gathered in the
last week; nothing looks too worrisome, mostly device-specific small
fixes, including the ABI fix for ASoC SOF"
* tag 'sound-6.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: soc-pcm: Add NULL check in BE reparenting
ALSA: seq: Fix function prototype mismatch in snd_seq_expand_var_event
ASoC: SOF: dai: move AMD_HS to end of list to restore backwards-compatibility
ASoC: max98373: Add checks for devm_kcalloc
ASoC: rt711-sdca: fix the latency time of clock stop prepare state machine transitions
ASoC: soc-pcm: Don't zero TDM masks in __soc_pcm_open()
ASoC: sgtl5000: Reset the CHIP_CLK_CTRL reg on remove
ASoC: hdac_hda: fix hda pcm buffer overflow issue
ASoC: stm32: i2s: remove irqf_oneshot flag
ASoC: wm8962: Wait for updated value of WM8962_CLOCKING1 register
|
|
On Tegra234 NVDEC firmware is loaded from a secure carveout, where it
has been loaded by a bootloader. When booting NVDEC, we need to tell it
the address of this firmware, which we can determine by checking the
starting address of the carveout. As such, add an MC API to query the
bounds of carveouts, and add related information on Tegra234.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
On Tegra234, engines that are programmed through Host1x channels can
be attached to either the NISO0 or NISO1 SMMU. Because of that, when
selecting a context device to use with an engine, we need to select
one that is also attached to the same SMMU.
Add a parameter to host1x_memory_context_alloc to specify which device
we are allocating a context for, and use it to pick an appropriate
context device.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
[treding@nvidia.com: update !IOMMU_API stub signature]
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
The code in drivers/soundwire/intel_init.c is hardware-dependent and the
code does not apply to new generations starting with MeteorLake. Refactor
and clean-up the code to make this intel_init.c hardware-agnostic and
move all hardware-dependencies in the SOF driver using chip descriptors.
|
|
Multishot ops cannot use the compl_reqs list as the request must stay in
the poll list, but that means they need to run each completion without
benefiting from batching.
Here introduce batching infrastructure for only small (ie 16 byte)
CQEs. This restriction is ok because there are no use cases posting 32
byte CQEs.
In the ring keep a batch of up to 16 posted results, and flush in the same
way as compl_reqs.
16 was chosen through experimentation on a microbenchmark ([1]), as well
as trying not to increase the size of the ring too much. This increases
the size to 1472 bytes from 1216.
[1]: https://github.com/DylanZA/liburing/commit/9ac66b36bcf4477bfafeff1c5f107896b7ae31cf
Run with $ make -j && ./benchmark/reg.b -s 1 -t 2000 -r 10
Gives results:
baseline 8309 k/s
8 18807 k/s
16 19338 k/s
32 20134 k/s
Suggested-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Dylan Yudaken <dylany@meta.com>
Link: https://lore.kernel.org/r/20221124093559.3780686-5-dylany@meta.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
add contiguous nv12 tiled format nv12_8l128 and nv12_10be_8l128
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
dvb_unregister_device() is known that prone to use-after-free.
That is, the cleanup from dvb_unregister_device() releases the dvb_device
even if there are pointers stored in file->private_data still refer to it.
This patch adds a reference counter into struct dvb_device and delays its
deallocation until no pointer refers to the object.
Link: https://lore.kernel.org/linux-media/20220807145952.10368-1-linma@zju.edu.cn
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Drivers for devices with multiple frontends which cannot be used
concurrently due to hardware limitations which enforce that restriction
by setting the mfe_shared field to 1 exhibit rather unfriendly behavior
towards applications: The unavailable frontend devices cannot be opened
at all, not even for read-only access to query information. Even worse,
any open call is blocked for 5 seconds by default.
Allow drivers for such devices to behave like regular busy frontend
devices instead, i.e. still allowing concurrent read access to the
unavailable frontend and denying concurrent write access with -EBUSY
without delay.
This patch does not alter the behavior of any existing driver to avoid
regressions. Driver developers who wish to take advantage of this must
ensure their driver can handle all read-only accesses to the unavailable
frontend, and indicate the capability by setting the mfe_shared field to
2 instead of 1.
Add a check to dvb-usb-init.c when automatically setting the mfe_shared
field that when a driver has already set the field to 2, it is not
overwritten.
Document the additional capability in the code comment about mfe_shared.
Link: https://lore.kernel.org/linux-media/trinity-22c77578-26b0-4867-9ff7-2668e5d22c64-1642799929896@3c-app-gmx-bap04
Signed-off-by: Robert Schlabbach <robert_s@gmx.net>
Tested-by: Robert Schlabbach <robert_s@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Extend the DVB frontend parameter enums with additional values specified
by the DVB-C2 (ETSI EN 302 769) and DVB-S2X (ETSI EN 302 307-2)
standards to be ready for frontend drivers for such receivers.
While most parameters will be "read-only" due to being autodetected by
the receiver and only being reported back for informational purposes,
the addition of SYS_DVBC2 to the delivery systems enum is required,
because there are DVB-C2 capable receivers which are not capable of
DVB-C/C2 autodetection and thus need this enum value to be explicitly
instructed to search for a DVB-C2 signal.
As for DVB-S2X, as that is an extension to DVB-S2, the same delivery
system enum as for DVB-S2 can be used.
Add the additional enum values and comments to the documentation.
Link: https://lore.kernel.org/linux-media/trinity-1b7c5a66-85d4-4595-a690-0fde965d49b3-1642146228587@3c-app-gmx-bap69
Signed-off-by: Robert Schlabbach <robert_s@gmx.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
There is no such error code EVINAL.
Link: https://lore.kernel.org/linux-media/270f5b7f79a24dc1a3e81d94f6f54fc0f08daf56.1639732105.git.geert+renesas@glider.be
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Unlike audio_pll1 and audio_pll2, there is no video_pll2. Further, the
name used in the RM is video_pll. So, let's rename "video_pll1" to
"video_pll" to be consistent with the RM and avoid misunderstandings.
The IMX8MN_VIDEO_PLL1* constants have not been removed to ensure
backward compatibility of the patch.
No functional changes intended.
Fixes: 96d6392b54dbb ("clk: imx: Add support for i.MX8MN clock driver")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20221117113637.1978703-4-dario.binacchi@amarulasolutions.com
|
|
The IMX8MN platform does not have any video processing unit (VPU), and
indeed in the reference manual (document IMX8MNRM Rev 2, 07/2022) there
is no occurrence of its pll. From an analysis of the code and the RM
itself, I think vpu pll is used instead of m7 alternate pll, probably
for copy and paste of code taken from modules of similar architectures.
As an example for all, if we consider the second row of the "Clock Root"
table of chapter 5 (Clocks and Power Management) of the RM:
Clock Root offset Source Select (CCM_TARGET_ROOTn[MUX])
... ... ...
ARM_M7_CLK_ROOT 0x8080 000 - 24M_REF_CLK
001 - SYSTEM_PLL2_DIV5
010 - SYSTEM_PLL2_DIV4
011 - M7_ALT_PLL_CLK
100 - SYSTEM_PLL1_CLK
101 - AUDIO_PLL1_CLK
110 - VIDEO_PLL_CLK
111 - SYSTEM_PLL3_CLK
... ... ...
but in the source code, the imx8mn_m7_sels clocks list contains vpu_pll
for the source select bits 011b.
So, let's rename "vpu_pll" to "m7_alt_pll" to be consistent with the RM.
The IMX8MN_VPU_* constants have not been removed to ensure backward
compatibility of the patch.
No functional changes intended.
Fixes: 96d6392b54dbb ("clk: imx: Add support for i.MX8MN clock driver")
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20221117113637.1978703-2-dario.binacchi@amarulasolutions.com
|
|
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Add a new dt-bindings/media/video-interfaces.h header that defines
macros corresponding to the bus types from media/video-interfaces.yaml.
This allows avoiding hardcoded constants in device tree sources.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Paul Elder <paul.elder@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
When userspace called VIDIOC_STREAMON, then you want to claim any streaming
resources needed and validate the video pipeline. Waiting for
start_streaming to be called is too late, since that can be postponed
until the required minimum of buffers is queued.
So add a prepare_streaming op (optional) that can be used for that
purpose, and a matching unprepare_streaming op (optional) that can
release any claimed resources. The unprepare_streaming op is called
when VIDIOC_STREAMOFF is called and q->streaming is 1, or when the
filehandle is closed while q->streaming is 1.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
Commit 868f9f2f8e00 ("vfs: fix copy_file_range() regression in cross-fs
copies") removed fallback to generic_copy_file_range() for cross-fs
cases inside vfs_copy_file_range().
To preserve behavior of nfsd and ksmbd server-side-copy, the fallback to
generic_copy_file_range() was added in nfsd and ksmbd code, but that
call is missing sb_start_write(), fsnotify hooks and more.
Ideally, nfsd and ksmbd would pass a flag to vfs_copy_file_range() that
will take care of the fallback, but that code would be subtle and we got
vfs_copy_file_range() logic wrong too many times already.
Instead, add a flag to explicitly request vfs_copy_file_range() to
perform only generic_copy_file_range() and let nfsd and ksmbd use this
flag only in the fallback path.
This choise keeps the logic changes to minimum in the non-nfsd/ksmbd code
paths to reduce the risk of further regressions.
Fixes: 868f9f2f8e00 ("vfs: fix copy_file_range() regression in cross-fs copies")
Tested-by: Namjae Jeon <linkinjeon@kernel.org>
Tested-by: Luis Henriques <lhenriques@suse.de>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Remove the pointless keying argument and associated enum and pass the
fill_super callback and a "bool reconf" instead. Also mark the function
static given that there are no users outside of super.c.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
