| Age | Commit message (Collapse) | Author |
|---|
|
No need to have file name inside file.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200826151455.55970-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Switch pxa2xx_ssp.h header to use BIT() and GENMASK().
It's better to read and understand. While here, correct ordering
of some definitions.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200826151455.55970-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We have direct users of some headers that are missed and
have header included when forward declarations are enough.
Update header block in pxa2xx_ssp.h to align with actual usage.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200826151455.55970-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This patch add support for regmap APIs that are intended to be used by
the drivers of some SPI slave chips which integrate the "SPI slave to
Avalon Master Bridge" (spi-avmm) IP.
The spi-avmm IP acts as a bridge to convert encoded streams of bytes
from the host to the chip's internal register read/write on Avalon bus.
The driver implements the register read/write operations for a generic
SPI master to access the sub devices behind spi-avmm bridge.
Signed-off-by: Xu Yilun <yilun.xu@intel.com>
Signed-off-by: Wu Hao <hao.wu@intel.com>
Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
Signed-off-by: Russ Weight <russell.h.weight@intel.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Reviewed-by: Luis Claudio R. Goncalves <lgoncalv@redhat.com>
Link: https://lore.kernel.org/r/1597822497-25107-2-git-send-email-yilun.xu@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Setting `hue` by calling tpg_s_hue() directly is risky, since it does not
perform range check. Clamp `hue` to the valid range in tpg_s_hue().
Suggested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Currently, power_supply framework supports only Battery, UPS,
Mains and USB power_supply_type. Add wireless power_supply_type
so that the drivers which supports wireless can register a power
supply class device with POWER_SUPPLY_TYPE_WIRELESS.
Signed-off-by: Subbaraman Narayanamurthy <subbaram@codeaurora.org>
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
The default RGB quantization range for BT.2020 is full range (just as for
all the other RGB pixel encodings), not limited range.
Update the V4L2_MAP_QUANTIZATION_DEFAULT macro and documentation
accordingly.
Also mention that HSV is always full range and cannot be limited range.
When RGB BT2020 was introduced in V4L2 it was not clear whether it should
be limited or full range, but full range is the right (and consistent)
choice.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
This is no longer used, SCTP now uses a private helper.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Update list of SSP registers with SSC2 and SSPSP2. These registers are
utilized by LPT/WPT AudioDSP architecture.
While SSC2 shares the same offset (0x40) as SSACDD, description of this
register for SSP device present on mentioned AudioDSP is different so
define separate constant to avoid any ambiguity.
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200825201743.4926-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add MT6360 regulator driver that contains two BUCKs and six LDOs
Signed-off-by: Gene Chen <gene_chen@richtek.com>
Link: https://lore.kernel.org/r/1598438958-26802-2-git-send-email-gene.chen.richtek@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The debug ABI can be extracted from the extended manifest content.
This information known at build time does not need to be provided
in a mailbox.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200825235854.1588034-4-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This step is needed to add possibility to pack sof_ipc_window inside
another one in used FW build tools - for example in extended manifest.
Structure reusability leads to easy parsing function reuse, so source
code is shorter and easier to maintain.
Using structures with constant size is less tricky and properly
supported by each toolchain by contrast to variable size elements.
This is minor ABI change - backward compatibility is kept.
Signed-off-by: Karol Trzcinski <karolx.trzcinski@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Link: https://lore.kernel.org/r/20200825235854.1588034-2-ranjani.sridharan@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Now we have four types of dependencies in the dependency graph, and not
all the pathes carry real dependencies (the dependencies that may cause
a deadlock), for example:
Given lock A and B, if we have:
CPU1 CPU2
============= ==============
write_lock(A); read_lock(B);
read_lock(B); write_lock(A);
(assuming read_lock(B) is a recursive reader)
then we have dependencies A -(ER)-> B, and B -(SN)-> A, and a
dependency path A -(ER)-> B -(SN)-> A.
In lockdep w/o recursive locks, a dependency path from A to A
means a deadlock. However, the above case is obviously not a
deadlock, because no one holds B exclusively, therefore no one
waits for the other to release B, so who get A first in CPU1 and
CPU2 will run non-blockingly.
As a result, dependency path A -(ER)-> B -(SN)-> A is not a
real/strong dependency that could cause a deadlock.
From the observation above, we know that for a dependency path to be
real/strong, no two adjacent dependencies can be as -(*R)-> -(S*)->.
Now our mission is to make __bfs() traverse only the strong dependency
paths, which is simple: we record whether we only have -(*R)-> for the
previous lock_list of the path in lock_list::only_xr, and when we pick a
dependency in the traverse, we 1) filter out -(S*)-> dependency if the
previous lock_list only has -(*R)-> dependency (i.e. ->only_xr is true)
and 2) set the next lock_list::only_xr to true if we only have -(*R)->
left after we filter out dependencies based on 1), otherwise, set it to
false.
With this extension for __bfs(), we now need to initialize the root of
__bfs() properly (with a correct ->only_xr), to do so, we introduce some
helper functions, which also cleans up a little bit for the __bfs() root
initialization code.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200807074238.1632519-8-boqun.feng@gmail.com
|
|
To add recursive read locks into the dependency graph, we need to store
the types of dependencies for the BFS later. There are four types of
dependencies:
* Exclusive -> Non-recursive dependencies: EN
e.g. write_lock(prev) held and try to acquire write_lock(next)
or non-recursive read_lock(next), which can be represented as
"prev -(EN)-> next"
* Shared -> Non-recursive dependencies: SN
e.g. read_lock(prev) held and try to acquire write_lock(next) or
non-recursive read_lock(next), which can be represented as
"prev -(SN)-> next"
* Exclusive -> Recursive dependencies: ER
e.g. write_lock(prev) held and try to acquire recursive
read_lock(next), which can be represented as "prev -(ER)-> next"
* Shared -> Recursive dependencies: SR
e.g. read_lock(prev) held and try to acquire recursive
read_lock(next), which can be represented as "prev -(SR)-> next"
So we use 4 bits for the presence of each type in lock_list::dep. Helper
functions and macros are also introduced to convert a pair of locks into
lock_list::dep bit and maintain the addition of different types of
dependencies.
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200807074238.1632519-7-boqun.feng@gmail.com
|
|
lock_list::distance is always not greater than MAX_LOCK_DEPTH (which
is 48 right now), so a u16 will fit. This patch reduces the size of
lock_list::distance to save space, so that we can introduce other fields
to help detect recursive read lock deadlocks without increasing the size
of lock_list structure.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200807074238.1632519-6-boqun.feng@gmail.com
|
|
On the archs using QUEUED_RWLOCKS, read_lock() is not always a recursive
read lock, actually it's only recursive if in_interrupt() is true. So
change the annotation accordingly to catch more deadlocks.
Note we used to treat read_lock() as pure recursive read locks in
lib/locking-seftest.c, and this is useful, especially for the lockdep
development selftest, so we keep this via a variable to force switching
lock annotation for read_lock().
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200807074238.1632519-2-boqun.feng@gmail.com
|
|
Fix kernel-doc warnings in <linux/seqlock.h>.
../include/linux/seqlock.h:152: warning: Incorrect use of kernel-doc format: * seqcount_LOCKNAME_init() - runtime initializer for seqcount_LOCKNAME_t
../include/linux/seqlock.h:164: warning: Incorrect use of kernel-doc format: * SEQCOUNT_LOCKTYPE() - Instantiate seqcount_LOCKNAME_t and helpers
../include/linux/seqlock.h:229: warning: Function parameter or member 'seq_name' not described in 'SEQCOUNT_LOCKTYPE_ZERO'
../include/linux/seqlock.h:229: warning: Function parameter or member 'assoc_lock' not described in 'SEQCOUNT_LOCKTYPE_ZERO'
../include/linux/seqlock.h:229: warning: Excess function parameter 'name' description in 'SEQCOUNT_LOCKTYPE_ZERO'
../include/linux/seqlock.h:229: warning: Excess function parameter 'lock' description in 'SEQCOUNT_LOCKTYPE_ZERO'
../include/linux/seqlock.h:695: warning: duplicate section name 'NOTE'
Demote kernel-doc notation for the macros "seqcount_LOCKNAME_init()" and
"SEQCOUNT_LOCKTYPE()"; scripts/kernel-doc does not handle them correctly.
Rename function parameters in SEQCNT_LOCKNAME_ZERO() documentation
to match the macro's argument names. Change the macro name in the
documentation to SEQCOUNT_LOCKTYPE_ZERO() to match the macro's name.
For raw_write_seqcount_latch(), rename the second NOTE: to NOTE2:
to prevent a kernel-doc warning. However, the generated output is not
quite as nice as it could be for this.
Fix a typo: s/LOCKTYPR/LOCKTYPE/
Fixes: 0efc94c5d15c ("seqcount: Compress SEQCNT_LOCKNAME_ZERO()")
Fixes: e4e9ab3f9f91 ("seqlock: Fold seqcount_LOCKNAME_init() definition")
Fixes: a8772dccb2ec ("seqlock: Fold seqcount_LOCKNAME_t definition")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200817000200.20993-1-rdunlap@infradead.org
|
|
David requested means to obtain the old/previous value from the
refcount API for tracing purposes.
Duplicate (most of) the API as __refcount*() with an additional
'int *' argument into which, if !NULL, the old value will be stored.
Requested-by: David Howells <dhowells@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lkml.kernel.org/r/20200729111120.GA2638@hirez.programming.kicks-ass.net
|
|
SD_DEGENERATE_GROUPS_MASK is only useful for sched/topology.c, but still
gets defined for anyone who imports topology.h, leading to a flurry of
unused variable warnings.
Move it out of the header and place it next to the SD degeneration
functions in sched/topology.c.
Fixes: 4ee4ea443a5d ("sched/topology: Introduce SD metaflag for flags needing > 1 groups")
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200825133216.9163-2-valentin.schneider@arm.com
|
|
Defining an array in a header imported all over the place clearly is a daft
idea, that still didn't stop me from doing it.
Leave a declaration of sd_flag_debug in topology.h and move its definition
to sched/debug.c.
Fixes: b6e862f38672 ("sched/topology: Define and assign sched_domain flag metadata")
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200825133216.9163-1-valentin.schneider@arm.com
|
|
The bits PF_IO_WORKER and PF_WQ_WORKER are tested together in
sched_submit_work() which is considered to be a hot path.
If the two bits cross the 8 or 16 bit boundary then most architecture
require multiple load instructions in order to create the constant
value. Also, such a value can not be encoded within the compare opcode.
By moving the bit definition within the same block, the compiler can
create/use one immediate value.
For some reason gcc-10 on ARM64 requires both bits to be next to each
other in order to issue "tst reg, val; bne label". Otherwise the result
is "mov reg1, val; tst reg, reg1; bne label".
Move PF_VCPU out of the way so that PF_IO_WORKER can be next to
PF_WQ_WORKER.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200819195505.y3fxk72sotnrkczi@linutronix.de
|
|
Problem:
raw_local_irq_save(); // software state on
local_irq_save(); // software state off
...
local_irq_restore(); // software state still off, because we don't enable IRQs
raw_local_irq_restore(); // software state still off, *whoopsie*
existing instances:
- lock_acquire()
raw_local_irq_save()
__lock_acquire()
arch_spin_lock(&graph_lock)
pv_wait() := kvm_wait() (same or worse for Xen/HyperV)
local_irq_save()
- trace_clock_global()
raw_local_irq_save()
arch_spin_lock()
pv_wait() := kvm_wait()
local_irq_save()
- apic_retrigger_irq()
raw_local_irq_save()
apic->send_IPI() := default_send_IPI_single_phys()
local_irq_save()
Possible solutions:
A) make it work by enabling the tracing inside raw_*()
B) make it work by keeping tracing disabled inside raw_*()
C) call it broken and clean it up now
Now, given that the only reason to use the raw_* variant is because you don't
want tracing. Therefore A) seems like a weird option (although it can be done).
C) is tempting, but OTOH it ends up converting a _lot_ of code to raw just
because there is one raw user, this strips the validation/tracing off for all
the other users.
So we pick B) and declare any code that ends up doing:
raw_local_irq_save()
local_irq_save()
lockdep_assert_irqs_disabled();
broken. AFAICT this problem has existed forever, the only reason it came
up is because commit: 859d069ee1dd ("lockdep: Prepare for NMI IRQ
state tracking") changed IRQ tracing vs lockdep recursion and the
first instance is fairly common, the other cases hardly ever happen.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[rewrote changelog]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Marco Elver <elver@google.com>
Link: https://lkml.kernel.org/r/20200723105615.1268126-1-npiggin@gmail.com
|
|
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Marco Elver <elver@google.com>
Link: https://lkml.kernel.org/r/20200821085348.546087214@infradead.org
|
|
This allows moving the leave_mm() call into generic code before
rcu_idle_enter(). Gets rid of more trace_*_rcuidle() users.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Marco Elver <elver@google.com>
Link: https://lkml.kernel.org/r/20200821085348.369441600@infradead.org
|
|
Sven reported that commit a21ee6055c30 ("lockdep: Change
hardirq{s_enabled,_context} to per-cpu variables") caused trouble on
s390 because their this_cpu_*() primitives disable preemption which
then lands back tracing.
On the one hand, per-cpu ops should use preempt_*able_notrace() and
raw_local_irq_*(), on the other hand, we can trivialy use raw_cpu_*()
ops for this.
Fixes: a21ee6055c30 ("lockdep: Change hardirq{s_enabled,_context} to per-cpu variables")
Reported-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200821085348.192346882@infradead.org
|
|
is_idle_task() may be used from noinstr functions such as
irqentry_enter(). Since the compiler is free to not inline regular
inline functions, switch to using __always_inline.
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20200820172046.GA177701@elver.google.com
|
|
Adding d_path helper function that returns full path for
given 'struct path' object, which needs to be the kernel
BTF 'path' object. The path is returned in buffer provided
'buf' of size 'sz' and is zero terminated.
bpf_d_path(&file->f_path, buf, size);
The helper calls directly d_path function, so there's only
limited set of function it can be called from. Adding just
very modest set for the start.
Updating also bpf.h tools uapi header and adding 'path' to
bpf_helpers_doc.py script.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: KP Singh <kpsingh@google.com>
Link: https://lore.kernel.org/bpf/20200825192124.710397-11-jolsa@kernel.org
|
|
Adding support to define sorted set of BTF ID values.
Following defines sorted set of BTF ID values:
BTF_SET_START(btf_allowlist_d_path)
BTF_ID(func, vfs_truncate)
BTF_ID(func, vfs_fallocate)
BTF_ID(func, dentry_open)
BTF_ID(func, vfs_getattr)
BTF_ID(func, filp_close)
BTF_SET_END(btf_allowlist_d_path)
It defines following 'struct btf_id_set' variable to access
values and count:
struct btf_id_set btf_allowlist_d_path;
Adding 'allowed' callback to struct bpf_func_proto, to allow
verifier the check on allowed callers.
Adding btf_id_set_contains function, which will be used by
allowed callbacks to verify the caller's BTF ID value is
within allowed set.
Also removing extra '\' in __BTF_ID_LIST macro.
Added BTF_SET_START_GLOBAL macro for global sets.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200825192124.710397-10-jolsa@kernel.org
|
|
Adding btf_struct_ids_match function to check if given address provided
by BTF object + offset is also address of another nested BTF object.
This allows to pass an argument to helper, which is defined via parent
BTF object + offset, like for bpf_d_path (added in following changes):
SEC("fentry/filp_close")
int BPF_PROG(prog_close, struct file *file, void *id)
{
...
ret = bpf_d_path(&file->f_path, ...
The first bpf_d_path argument is hold by verifier as BTF file object
plus offset of f_path member.
The btf_struct_ids_match function will walk the struct file object and
check if there's nested struct path object on the given offset.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200825192124.710397-9-jolsa@kernel.org
|
|
Moving btf_resolve_size into __btf_resolve_size and
keeping btf_resolve_size public with just first 3
arguments, because the rest of the arguments are not
used by outside callers.
Following changes are adding more arguments, which
are not useful to outside callers. They will be added
to the __btf_resolve_size function.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200825192124.710397-4-jolsa@kernel.org
|
|
Adds support for both bpf_{sk, inode}_storage_{get, delete} to be used
in LSM programs. These helpers are not used for tracing programs
(currently) as their usage is tied to the life-cycle of the object and
should only be used where the owning object won't be freed (when the
owning object is passed as an argument to the LSM hook). Thus, they
are safer to use in LSM hooks than tracing. Usage of local storage in
tracing programs will probably follow a per function based whitelist
approach.
Since the UAPI helper signature for bpf_sk_storage expect a bpf_sock,
it, leads to a compilation warning for LSM programs, it's also updated
to accept a void * pointer instead.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200825182919.1118197-7-kpsingh@chromium.org
|
|
Similar to bpf_local_storage for sockets, add local storage for inodes.
The life-cycle of storage is managed with the life-cycle of the inode.
i.e. the storage is destroyed along with the owning inode.
The BPF LSM allocates an __rcu pointer to the bpf_local_storage in the
security blob which are now stackable and can co-exist with other LSMs.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200825182919.1118197-6-kpsingh@chromium.org
|
|
A purely mechanical change:
bpf_sk_storage.c = bpf_sk_storage.c + bpf_local_storage.c
bpf_sk_storage.h = bpf_sk_storage.h + bpf_local_storage.h
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200825182919.1118197-5-kpsingh@chromium.org
|
|
Refactor the functionality in bpf_sk_storage.c so that concept of
storage linked to kernel objects can be extended to other objects like
inode, task_struct etc.
Each new local storage will still be a separate map and provide its own
set of helpers. This allows for future object specific extensions and
still share a lot of the underlying implementation.
This includes the changes suggested by Martin in:
https://lore.kernel.org/bpf/20200725013047.4006241-1-kafai@fb.com/
adding new map operations to support bpf_local_storage maps:
* storages for different kernel objects to optionally have different
memory charging strategy (map_local_storage_charge,
map_local_storage_uncharge)
* Functionality to extract the storage pointer from a pointer to the
owning object (map_owner_storage_ptr)
Co-developed-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200825182919.1118197-4-kpsingh@chromium.org
|
|
Provide the a ability to define local storage caches on a per-object
type basis. The caches and caching indices for different objects should
not be inter-mixed as suggested in:
https://lore.kernel.org/bpf/20200630193441.kdwnkestulg5erii@kafai-mbp.dhcp.thefacebook.com/
"Caching a sk-storage at idx=0 of a sk should not stop an
inode-storage to be cached at the same idx of a inode."
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200825182919.1118197-3-kpsingh@chromium.org
|
|
A purely mechanical change to split the renaming from the actual
generalization.
Flags/consts:
SK_STORAGE_CREATE_FLAG_MASK BPF_LOCAL_STORAGE_CREATE_FLAG_MASK
BPF_SK_STORAGE_CACHE_SIZE BPF_LOCAL_STORAGE_CACHE_SIZE
MAX_VALUE_SIZE BPF_LOCAL_STORAGE_MAX_VALUE_SIZE
Structs:
bucket bpf_local_storage_map_bucket
bpf_sk_storage_map bpf_local_storage_map
bpf_sk_storage_data bpf_local_storage_data
bpf_sk_storage_elem bpf_local_storage_elem
bpf_sk_storage bpf_local_storage
The "sk" member in bpf_local_storage is also updated to "owner"
in preparation for changing the type to void * in a subsequent patch.
Functions:
selem_linked_to_sk selem_linked_to_storage
selem_alloc bpf_selem_alloc
__selem_unlink_sk bpf_selem_unlink_storage_nolock
__selem_link_sk bpf_selem_link_storage_nolock
selem_unlink_sk __bpf_selem_unlink_storage
sk_storage_update bpf_local_storage_update
__sk_storage_lookup bpf_local_storage_lookup
bpf_sk_storage_map_free bpf_local_storage_map_free
bpf_sk_storage_map_alloc bpf_local_storage_map_alloc
bpf_sk_storage_map_alloc_check bpf_local_storage_map_alloc_check
bpf_sk_storage_map_check_btf bpf_local_storage_map_check_btf
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20200825182919.1118197-2-kpsingh@chromium.org
|
|
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Remove useless variable initialization and allocation, adjust log
levels to make support easier, and fix comments. No functional
changes.
Guennadi Liakhovetski (2):
ASoC: SOF: topology: (cosmetic) remove redundant variable
initialisations
ASoC: SOF: (cosmetic) use the "bool" type where it makes sense
Pierre-Louis Bossart (4):
ASoC: SOF: IPC: reduce verbosity of IPC pointer updates
ASoC: SOF: acpi: add dev_dbg() log for probe completion
ASoC: SOF: Intel: add dev_dbg log when driver is not selected
ASoC: Intel: use consistent HDAudio spelling in comments/docs
Ranjani Sridharan (2):
ASoC: SOF: topology: remove unnecessary memory alloc for sdev->private
ASoC: SOF: topology: reduce the log level for unhandled widgets
include/sound/soc-acpi.h | 2 +-
sound/soc/intel/Kconfig | 2 +-
sound/soc/intel/skylake/skl.c | 6 +++---
sound/soc/sof/Kconfig | 2 +-
sound/soc/sof/intel/Kconfig | 2 +-
sound/soc/sof/ipc.c | 16 +++++++++++-----
sound/soc/sof/pcm.c | 8 ++++----
sound/soc/sof/sof-acpi-dev.c | 2 ++
sound/soc/sof/sof-pci-dev.c | 6 +++---
sound/soc/sof/sof-priv.h | 10 +++++-----
sound/soc/sof/topology.c | 20 ++++----------------
11 files changed, 36 insertions(+), 40 deletions(-)
base-commit: aafdeba5cbc14cecee3797e669473b70a2b3e81e
--
2.25.1
|
|
We use HDaudio and HDAudio, pick one to make searches easier.
No functionality change
Reported-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200824200912.46852-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The generic battery temperature properties are already supported by the
power-supply core. Let's support parsing of the common battery temperature
properties from a device-tree.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Summit SMB3xx series is a Programmable Switching Li+ Battery Charger.
This patch adds device-tree binding for Summit SMB345, SMB347 and SMB358
chargers.
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
|
|
Linux 5.9-rc2
|
|
Backmerge requested by Tomi for a fix to omap inconsistent
locking state issue, and because we need at least v5.9-rc2 now.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
|
|
Add support for a100 in the sunxi-ng CCU framework.
Signed-off-by: Yangtao Li <frank@allwinnertech.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1eb41bf6c966a0e54820200650d27a5d4f2ac160.1595572867.git.frank@allwinnertech.com
|
|
The CONFIG_PREEMPT=n instance of rcu_read_unlock is even more
aggressively than that of CONFIG_PREEMPT=y in deferring reporting
quiescent states to the RCU core. This is just what is wanted in normal
use because it reduces overhead, but the resulting delay is not what
is wanted for kernels built with CONFIG_RCU_STRICT_GRACE_PERIOD=y.
This commit therefore adds an rcu_read_unlock_strict() function that
checks for exceptional conditions, and reports the newly started
quiescent state if it is safe to do so, also doing a spin-delay if
requested via rcutree.rcu_unlock_delay. This commit also adds a call
to rcu_read_unlock_strict() from the CONFIG_PREEMPT=n instance of
__rcu_read_unlock().
[ paulmck: Fixed bug located by kernel test robot <lkp@intel.com> ]
Reported-by Jann Horn <jannh@google.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
The x86/entry work removed all uses of __rcu_is_watching(), therefore
this commit removes it entirely.
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <x86@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
list/hlist_for_each_entry_rcu() provides an optional cond argument
to specify the lock held in the updater side.
However for SRCU read side, not providing the cond argument results
into false positive as whether srcu_read_lock is held or not is not
checked implicitly. Therefore, on read side the lockdep expression
srcu_read_lock_held(srcu struct) can solve this issue.
However, the function still fails to check the cases where srcu
protected list is traversed with rcu_read_lock() instead of
srcu_read_lock(). Therefore, to remove the false negative,
this patch introduces two new list traversal primitives :
list_for_each_entry_srcu() and hlist_for_each_entry_srcu().
Both of the functions have non-optional cond argument
as it is required for both read and update side, and simply checks
if the cond is true. For regular read side the lockdep expression
srcu_read_lock_head() can be passed as the cond argument to
list/hlist_for_each_entry_srcu().
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Suraj Upadhyay <usuraj35@gmail.com>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
[ paulmck: Add "true" per kbuild test robot feedback. ]
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
This commit fixes the kerneldoc comments for rcu_read_unlock_bh(),
rcu_read_unlock_sched() and rcu_head_after_call_rcu() so they e.g. get
properly linked in the API documentation. Also add parenthesis after
function names to match the notation used in other kerneldoc comments in
the same file.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
GP numbers start from -300 and gp_seq numbers start of -1200 (for a
shift of 2). These negative numbers are printed as unsigned long which
not only takes up more text space, but is rather confusing to the reader
as they have to constantly expend energy to truncate the number. Just
print the negative numbering directly.
Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
|
|
Remove extra indent on some of adjacent declarations.
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use devlink_health_report to push error indications.
We implement this in qede via callback function to make it possible
to reuse the same for other drivers sitting on top of qed in future.
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Michal Kalderon <michal.kalderon@marvell.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
