| Age | Commit message (Collapse) | Author |
|---|
|
Pull kvm updates from Paolo Bonzini:
"ARM:
- Generalized infrastructure for 'writable' ID registers, effectively
allowing userspace to opt-out of certain vCPU features for its
guest
- Optimization for vSGI injection, opportunistically compressing
MPIDR to vCPU mapping into a table
- Improvements to KVM's PMU emulation, allowing userspace to select
the number of PMCs available to a VM
- Guest support for memory operation instructions (FEAT_MOPS)
- Cleanups to handling feature flags in KVM_ARM_VCPU_INIT, squashing
bugs and getting rid of useless code
- Changes to the way the SMCCC filter is constructed, avoiding wasted
memory allocations when not in use
- Load the stage-2 MMU context at vcpu_load() for VHE systems,
reducing the overhead of errata mitigations
- Miscellaneous kernel and selftest fixes
LoongArch:
- New architecture for kvm.
The hardware uses the same model as x86, s390 and RISC-V, where
guest/host mode is orthogonal to supervisor/user mode. The
virtualization extensions are very similar to MIPS, therefore the
code also has some similarities but it's been cleaned up to avoid
some of the historical bogosities that are found in arch/mips. The
kernel emulates MMU, timer and CSR accesses, while interrupt
controllers are only emulated in userspace, at least for now.
RISC-V:
- Support for the Smstateen and Zicond extensions
- Support for virtualizing senvcfg
- Support for virtualized SBI debug console (DBCN)
S390:
- Nested page table management can be monitored through tracepoints
and statistics
x86:
- Fix incorrect handling of VMX posted interrupt descriptor in
KVM_SET_LAPIC, which could result in a dropped timer IRQ
- Avoid WARN on systems with Intel IPI virtualization
- Add CONFIG_KVM_MAX_NR_VCPUS, to allow supporting up to 4096 vCPUs
without forcing more common use cases to eat the extra memory
overhead.
- Add virtualization support for AMD SRSO mitigation (IBPB_BRTYPE and
SBPB, aka Selective Branch Predictor Barrier).
- Fix a bug where restoring a vCPU snapshot that was taken within 1
second of creating the original vCPU would cause KVM to try to
synchronize the vCPU's TSC and thus clobber the correct TSC being
set by userspace.
- Compute guest wall clock using a single TSC read to avoid
generating an inaccurate time, e.g. if the vCPU is preempted
between multiple TSC reads.
- "Virtualize" HWCR.TscFreqSel to make Linux guests happy, which
complain about a "Firmware Bug" if the bit isn't set for select
F/M/S combos. Likewise "virtualize" (ignore) MSR_AMD64_TW_CFG to
appease Windows Server 2022.
- Don't apply side effects to Hyper-V's synthetic timer on writes
from userspace to fix an issue where the auto-enable behavior can
trigger spurious interrupts, i.e. do auto-enabling only for guest
writes.
- Remove an unnecessary kick of all vCPUs when synchronizing the
dirty log without PML enabled.
- Advertise "support" for non-serializing FS/GS base MSR writes as
appropriate.
- Harden the fast page fault path to guard against encountering an
invalid root when walking SPTEs.
- Omit "struct kvm_vcpu_xen" entirely when CONFIG_KVM_XEN=n.
- Use the fast path directly from the timer callback when delivering
Xen timer events, instead of waiting for the next iteration of the
run loop. This was not done so far because previously proposed code
had races, but now care is taken to stop the hrtimer at critical
points such as restarting the timer or saving the timer information
for userspace.
- Follow the lead of upstream Xen and ignore the VCPU_SSHOTTMR_future
flag.
- Optimize injection of PMU interrupts that are simultaneous with
NMIs.
- Usual handful of fixes for typos and other warts.
x86 - MTRR/PAT fixes and optimizations:
- Clean up code that deals with honoring guest MTRRs when the VM has
non-coherent DMA and host MTRRs are ignored, i.e. EPT is enabled.
- Zap EPT entries when non-coherent DMA assignment stops/start to
prevent using stale entries with the wrong memtype.
- Don't ignore guest PAT for CR0.CD=1 && KVM_X86_QUIRK_CD_NW_CLEARED=y
This was done as a workaround for virtual machine BIOSes that did
not bother to clear CR0.CD (because ancient KVM/QEMU did not bother
to set it, in turn), and there's zero reason to extend the quirk to
also ignore guest PAT.
x86 - SEV fixes:
- Report KVM_EXIT_SHUTDOWN instead of EINVAL if KVM intercepts
SHUTDOWN while running an SEV-ES guest.
- Clean up the recognition of emulation failures on SEV guests, when
KVM would like to "skip" the instruction but it had already been
partially emulated. This makes it possible to drop a hack that
second guessed the (insufficient) information provided by the
emulator, and just do the right thing.
Documentation:
- Various updates and fixes, mostly for x86
- MTRR and PAT fixes and optimizations"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (164 commits)
KVM: selftests: Avoid using forced target for generating arm64 headers
tools headers arm64: Fix references to top srcdir in Makefile
KVM: arm64: Add tracepoint for MMIO accesses where ISV==0
KVM: arm64: selftest: Perform ISB before reading PAR_EL1
KVM: arm64: selftest: Add the missing .guest_prepare()
KVM: arm64: Always invalidate TLB for stage-2 permission faults
KVM: x86: Service NMI requests after PMI requests in VM-Enter path
KVM: arm64: Handle AArch32 SPSR_{irq,abt,und,fiq} as RAZ/WI
KVM: arm64: Do not let a L1 hypervisor access the *32_EL2 sysregs
KVM: arm64: Refine _EL2 system register list that require trap reinjection
arm64: Add missing _EL2 encodings
arm64: Add missing _EL12 encodings
KVM: selftests: aarch64: vPMU test for validating user accesses
KVM: selftests: aarch64: vPMU register test for unimplemented counters
KVM: selftests: aarch64: vPMU register test for implemented counters
KVM: selftests: aarch64: Introduce vpmu_counter_access test
tools: Import arm_pmuv3.h
KVM: arm64: PMU: Allow userspace to limit PMCR_EL0.N for the guest
KVM: arm64: Sanitize PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR} before first run
KVM: arm64: Add {get,set}_user for PM{C,I}NTEN{SET,CLR}, PMOVS{SET,CLR}
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux
Pull sh updates from John Paul Adrian Glaubitz:
"While the previously announced patch series for converting arch/sh to
device trees is not yet ready for inclusion to mainline and therefore
didn't make it for this pull request, there are still a small number
changes for v6.7 which include one platform (board plus CPU and driver
code) removal plus two fixes.
The removal sent in by Arnd Bergmann concerns the microdev board which
was an early SuperH prototype board that was never used in production.
With the board removed, we were able to drop the now unused code for
the SH4-202 CPU and well as the driver code for the superhyway bus and
a custom implementation for ioport_map() and ioport_unmap() which will
allow us to simplify ioport handling in the future.
Another patch set by Geert Uytterhoeven revives SuperH BIOS
earlyprintk support which got accidentally disabled in
e76fe57447e88916 ("sh: Remove old early serial console code V2"), the
second patch in the series updates the documentation.
Finally, a patch by Masami Hiramatsu fixes a regression reported by
the kernel test robot which uncovered that arch/sh is not implementing
arch_cmpxchg_local() and therefore needs use __generic_cmpxchg_local()
instead"
* tag 'sh-for-v6.7-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
locking/atomic: sh: Use generic_cmpxchg_local for arch_cmpxchg_local()
Documentation: kernel-parameters: Add earlyprintk=bios on SH
sh: bios: Revive earlyprintk support
sh: machvec: Remove custom ioport_{un,}map()
sh: Remove superhyway bus support
sh: Remove unused SH4-202 support
sh: Remove stale microdev board
|
|
Pull rdma updates from Jason Gunthorpe:
"Nothing exciting this cycle, most of the diffstat is changing SPDX
'or' to 'OR'.
Summary:
- Bugfixes for hns, mlx5, and hfi1
- Hardening patches for size_*, counted_by, strscpy
- rts fixes from static analysis
- Dump SRQ objects in rdma netlink, with hns support
- Fix a performance regression in mlx5 MR deregistration
- New XDR (200Gb/lane) link speed
- SRQ record doorbell latency optimization for hns
- IPSEC support for mlx5 multi-port mode
- ibv_rereg_mr() support for irdma
- Affiliated event support for bnxt_re
- Opt out for the spec compliant qkey security enforcement as we
discovered SW that breaks under enforcement
- Comment and trivial updates"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (50 commits)
IB/mlx5: Fix init stage error handling to avoid double free of same QP and UAF
RDMA/mlx5: Fix mkey cache WQ flush
RDMA/hfi1: Workaround truncation compilation error
IB/hfi1: Fix potential deadlock on &irq_src_lock and &dd->uctxt_lock
RDMA/core: Remove NULL check before dev_{put, hold}
RDMA/hfi1: Remove redundant assignment to pointer ppd
RDMA/mlx5: Change the key being sent for MPV device affiliation
RDMA/bnxt_re: Fix clang -Wimplicit-fallthrough in bnxt_re_handle_cq_async_error()
RDMA/hns: Fix init failure of RoCE VF and HIP08
RDMA/hns: Fix unnecessary port_num transition in HW stats allocation
RDMA/hns: The UD mode can only be configured with DCQCN
RDMA/hns: Add check for SL
RDMA/hns: Fix signed-unsigned mixed comparisons
RDMA/hns: Fix uninitialized ucmd in hns_roce_create_qp_common()
RDMA/hns: Fix printing level of asynchronous events
RDMA/core: Add support to set privileged QKEY parameter
RDMA/bnxt_re: Do not report SRQ error in srq notification
RDMA/bnxt_re: Report async events and errors
RDMA/bnxt_re: Update HW interface headers
IB/mlx5: Fix rdma counter binding for RAW QP
...
|
|
Pull SCSI updates from James Bottomley:
"Updates to the usual drivers (ufs, megaraid_sas, lpfc, target, ibmvfc,
scsi_debug) plus the usual assorted minor fixes and updates.
The major change this time around is a prep patch for rethreading of
the driver reset handler API not to take a scsi_cmd structure which
starts to reduce various drivers' dependence on scsi_cmd in error
handling"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (132 commits)
scsi: ufs: core: Leave space for '\0' in utf8 desc string
scsi: ufs: core: Conversion to bool not necessary
scsi: ufs: core: Fix race between force complete and ISR
scsi: megaraid: Fix up debug message in megaraid_abort_and_reset()
scsi: aic79xx: Fix up NULL command in ahd_done()
scsi: message: fusion: Initialize return value in mptfc_bus_reset()
scsi: mpt3sas: Fix loop logic
scsi: snic: Remove useless code in snic_dr_clean_pending_req()
scsi: core: Add comment to target_destroy in scsi_host_template
scsi: core: Clean up scsi_dev_queue_ready()
scsi: pmcraid: Add missing scsi_device_put() in pmcraid_eh_target_reset_handler()
scsi: target: core: Fix kernel-doc comment
scsi: pmcraid: Fix kernel-doc comment
scsi: core: Handle depopulation and restoration in progress
scsi: ufs: core: Add support for parsing OPP
scsi: ufs: core: Add OPP support for scaling clocks and regulators
scsi: ufs: dt-bindings: common: Add OPP table
scsi: scsi_debug: Add param to control sdev's allow_restart
scsi: scsi_debug: Add debugfs interface to fail target reset
scsi: scsi_debug: Add new error injection type: Reset LUN failed
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"Core Frameworks:
- Allow all MFD Cell properties to be filled in dynamically at
runtime
- Skip disabled device nodes and continue to look for subsequent
devices
New Device Support:
- Add support for Lunar Lake-M PCI to Intel LPSS PCI
- Add support for Denverton to Intel ICH LPC
New Functionality:
- Add support for Clocks to Texas Instruments TWL* Core
- Add support for Interrupts to STMicroelectronics STM32 Timers
Fix-ups:
- Convert to new devm-* (managed) power-off API
- Remove superfluous code
- Bunch of Device Tree additions, conversions and adaptions
- Simplify obtaining resources (memory, device data) using unified
API helpers
- Trivial coding-style / spelling type clean-ups
- Constify / staticify changes
- Expand or edit on existing documentation
- Convert some Regmap configurations to use the Maple Tree cache
- Apply new __counted_by() annotation to several data structures
containing flexible arrays
- Replace strncpy() with strscpy()
Bug Fixes:
- Remove double put creating reference imbalances
- Ensure headphone/lineout detection gets set when booting with ACPI"
* tag 'mfd-next-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (73 commits)
mfd: lpc_ich: Mark *_gpio_offsets data with const
spmi: rename spmi device lookup helper
spmi: document spmi_device_from_of() refcounting
dt-bindings: mfd: armltd: Move Arm board syscon's to separate schema
mfd: rk8xx: Add support for RK806 power off
mfd: rk8xx: Add support for standard system-power-controller property
dt-bindings: mfd: rk806: Allow system-power-controller property
dt-bindings: mfd: rk8xx: Deprecate rockchip,system-power-controller
dt-bindings: mfd: max8925: Convert to DT schema format
mfd: Use i2c_get_match_data() in a selection of drivers
mfd: Use device_get_match_data() in a bunch of drivers
mfd: mc13xxx-spi/wm831x-spi: Use spi_get_device_match_data()
mfd: motorola-cpcap: Drop unnecessary of_match_device() call
mfd: arizona-spi: Set pdata.hpdet_channel for ACPI enumerated devs
mfd: qcom-spmi-pmic: Switch to EXPORT_SYMBOL_GPL()
mfd: qcom-spmi-pmic: Fix revid implementation
mfd: qcom-spmi-pmic: Fix reference leaks in revid helper
mfd: intel-m10-bmc: Change contact for ABI docs
mfd: max8907: Convert to use maple tree register cache
mfd: max77686: Convert to use maple tree register cache
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"Most of changes at this time are for ASoC, spread over ASoC core and
drivers due to the API prefix standardization.
Other than that, there have little change wrt API, rather lots of
driver-specific updates and fixes.
Some highlight below:
ASoC:
- Standardization of API prefix
- GPIO API usage improvements
- Support for HDA patches
- Lots of work on SOF, including crash dump support
- Fixes for noise when stopping some Sounwire CODECs
- Support for AMD platforms with es83xx, AMD ACP 6.3 and 7.0, Awinc
AT87390 and AW88399, many Intel platforms, many Mediatek platforms,
Qualcomm SM6115 and SC7180 platforms, Richtek RTQ9128 and Texas
Instruments TAS575x
HD-audio and USB-audio:
- Deferred probe support of audio component binding
- More fixes and enhancements for Cirrus subcodecs
- USB Scarlett2 mixer and McIntosh DSD quirk
Others:
- More enhancement of snd-aloop driver
- Update MAINTAINERS entry for linux-sound mailing list"
* tag 'sound-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (485 commits)
ALSA: hda: cs35l41: Fix missing error code in cs35l41_smart_amp()
ALSA: hda: cs35l41: mark cs35l41_verify_id() static
ASoC: codecs: wsa883x: make use of new mute_unmute_on_trigger flag
ASoC: soc-dai: add flag to mute and unmute stream during trigger
ASoC: ams-delta.c: use component after check
ASoC: amd: acp: select SND_SOC_AMD_ACP_LEGACY_COMMON for ACP63
ASoC: codecs: aw88399: fix typo in Kconfig select
ASoC: amd: acp: add ACPI dependency
ASoC: Intel: avs: Add rt5514 machine board
ASoC: Intel: avs: Add rt5514 machine board
ALSA: scarlett2: Add missing check with firmware version control
ALSA: virtio: use ack callback
ALSA: scarlett2: Remap Level Meter values
ALSA: scarlett2: Allow passing any output to line_out_remap()
ALSA: scarlett2: Add support for reading firmware version
ALSA: scarlett2: Rename Gen 3 config sets
ALSA: scarlett2: Rename scarlett_gen2 to scarlett2
ASoC: cs35l41: Detect CSPL errors when sending CSPL commands
ALSA: hda: cs35l41: Check CSPL state after loading firmware
ALSA: hda: cs35l41: Do not unload firmware before reset in system suspend
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- fixes for crashes detected by CONFIG_KUNIT_ALL_TESTS in hid-uclogic
driver (Jinjie Ruan)
- HID selftests fixes and improvements (Benjamin Tissoires)
- probe error handling path fixes in hid-nvidia-shield driver
(Christophe JAILLET)
- cleanup of LED handling in hid-nintendo (Martino Fontana)
- big cleanup of logitech-hidpp probe code (Hans de Goede)
- Suspend/Resume fix for USB Thinkpad Compact Keyboard (Jamie Lentin)
- firmware detection improvement for Lenovo cptkbd (Mikhail
Khvainitski)
- IRQ shutdown and workqueue initialization fixes for hid-cp2112 driver
(Danny Kaehn)
- #ifdef CONFIG_PM removal from HID code (Thomas Weißschuh)
- other assorted device-ID additions and quirks
* tag 'for-linus-2023110101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (31 commits)
HID: Add quirk for Dell Pro Wireless Keyboard and Mouse KM5221W
HID: logitech-hidpp: Stop IO before calling hid_connect()
HID: logitech-hidpp: Drop HIDPP_QUIRK_UNIFYING
HID: logitech-hidpp: Drop delayed_work_cb()
HID: logitech-hidpp: Fix connect event race
HID: logitech-hidpp: Remove unused connected param from *_connect()
HID: logitech-hidpp: Remove connected check for non-unifying devices
HID: logitech-hidpp: Add hidpp_non_unifying_init() helper
HID: logitech-hidpp: Move hidpp_overwrite_name() to before connect check
HID: logitech-hidpp: Move g920_get_config() to just before hidpp_ff_init()
HID: logitech-hidpp: Remove wtp_get_config() call from probe()
HID: logitech-hidpp: Move get_wireless_feature_index() check to hidpp_connect_event()
HID: logitech-hidpp: Revert "Don't restart communication if not necessary"
HID: logitech-hidpp: Don't restart IO, instead defer hid_connect() only
HID: rmi: remove #ifdef CONFIG_PM
HID: multitouch: remove #ifdef CONFIG_PM
HID: usbhid: remove #ifdef CONFIG_PM
HID: core: remove #ifdef CONFIG_PM from hid_driver
hid: lenovo: Resend all settings on reset_resume for compact keyboards
HID: uclogic: Fix a work->entry not empty bug in __queue_work()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Use acpi_evaluate_dsm_typed() instead of open-coding _DSM
evaluation to learn device characteristics (Andy Shevchenko)
- Tidy multi-function header checks using new PCI_HEADER_TYPE_MASK
definition (Ilpo Järvinen)
- Simplify config access error checking in various drivers (Ilpo
Järvinen)
- Use pcie_capability_clear_word() (not
pcie_capability_clear_and_set_word()) when only clearing (Ilpo
Järvinen)
- Add pci_get_base_class() to simplify finding devices using base
class only (ignoring subclass and programming interface) (Sui
Jingfeng)
- Add pci_is_vga(), which includes ancient PCI_CLASS_NOT_DEFINED_VGA
devices from before the Class Code was added to PCI (Sui Jingfeng)
- Use pci_is_vga() for vgaarb, sysfs "boot_vga", virtio, qxl to
include ancient VGA devices (Sui Jingfeng)
Resource management:
- Make pci_assign_unassigned_resources() non-init because sparc uses
it after init (Randy Dunlap)
Driver binding:
- Retain .remove() and .probe() callbacks (previously __init) because
sysfs may cause them to be called later (Uwe Kleine-König)
- Prevent xHCI driver from claiming AMD VanGogh USB3 DRD device, so
it can be claimed by dwc3 instead (Vicki Pfau)
PCI device hotplug:
- Add Ampere Altra Attention Indicator extension driver for acpiphp
(D Scott Phillips)
Power management:
- Quirk VideoPropulsion Torrent QN16e with longer delay after reset
(Lukas Wunner)
- Prevent users from overriding drivers that say we shouldn't use
D3cold (Lukas Wunner)
- Avoid PME from D3hot/D3cold for AMD Rembrandt and Phoenix USB4
because wakeup interrupts from those states don't work if amd-pmc
has put the platform in a hardware sleep state (Mario Limonciello)
IOMMU:
- Disable ATS for Intel IPU E2000 devices with invalidation message
endianness erratum (Bartosz Pawlowski)
Error handling:
- Factor out interrupt enable/disable into helpers (Kai-Heng Feng)
Peer-to-peer DMA:
- Fix flexible-array usage in struct pci_p2pdma_pagemap in case we
ever use pagemaps with multiple entries (Gustavo A. R. Silva)
ASPM:
- Revert a change that broke when drivers disabled L1 and users later
enabled an L1.x substate via sysfs, and fix a similar issue when
users disabled L1 via sysfs (Heiner Kallweit)
Endpoint framework:
- Fix double free in __pci_epc_create() (Dan Carpenter)
- Use IS_ERR_OR_NULL() to simplify endpoint core (Ruan Jinjie)
Cadence PCIe controller driver:
- Drop unused "is_rc" member (Li Chen)
Freescale Layerscape PCIe controller driver:
- Enable 64-bit addressing in endpoint mode (Guanhua Gao)
Intel VMD host bridge driver:
- Fix multi-function header check (Ilpo Järvinen)
Microsoft Hyper-V host bridge driver:
- Annotate struct hv_dr_state with __counted_by (Kees Cook)
NVIDIA Tegra194 PCIe controller driver:
- Drop setting of LNKCAP_MLW (max link width) since dw_pcie_setup()
already does this via dw_pcie_link_set_max_link_width() (Yoshihiro
Shimoda)
Qualcomm PCIe controller driver:
- Use PCIE_SPEED2MBS_ENC() to simplify encoding of link speed
(Manivannan Sadhasivam)
- Add a .write_dbi2() callback so DBI2 register writes, e.g., for
setting the BAR size, work correctly (Manivannan Sadhasivam)
- Enable ASPM for platforms that use 1.9.0 ops, because the PCI core
doesn't enable ASPM states that haven't been enabled by the
firmware (Manivannan Sadhasivam)
Renesas R-Car Gen4 PCIe controller driver:
- Add DesignWare core support (set max link width, EDMA_UNROLL flag,
.pre_init(), .deinit(), etc) for use by R-Car Gen4 driver
(Yoshihiro Shimoda)
- Add driver and DT schema for DesignWare-based Renesas R-Car Gen4
controller in both host and endpoint mode (Yoshihiro Shimoda)
Xilinx NWL PCIe controller driver:
- Update ECAM size to support 256 buses (Thippeswamy Havalige)
- Stop setting bridge primary/secondary/subordinate bus numbers,
since PCI core does this (Thippeswamy Havalige)
Xilinx XDMA controller driver:
- Add driver and DT schema for Zynq UltraScale+ MPSoCs devices with
Xilinx XDMA Soft IP (Thippeswamy Havalige)
Miscellaneous:
- Use FIELD_GET()/FIELD_PREP() to simplify and reduce use of _SHIFT
macros (Ilpo Järvinen, Bjorn Helgaas)
- Remove logic_outb(), _outw(), outl() duplicate declarations (John
Sanpe)
- Replace unnecessary UTF-8 in Kconfig help text because menuconfig
doesn't render it correctly (Liu Song)"
* tag 'pci-v6.7-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (102 commits)
PCI: qcom-ep: Add dedicated callback for writing to DBI2 registers
PCI: Simplify pcie_capability_clear_and_set_word() to ..._clear_word()
PCI: endpoint: Fix double free in __pci_epc_create()
PCI: xilinx-xdma: Add Xilinx XDMA Root Port driver
dt-bindings: PCI: xilinx-xdma: Add schemas for Xilinx XDMA PCIe Root Port Bridge
PCI: xilinx-cpm: Move IRQ definitions to a common header
PCI: xilinx-nwl: Modify ECAM size to enable support for 256 buses
PCI: xilinx-nwl: Rename the NWL_ECAM_VALUE_DEFAULT macro
dt-bindings: PCI: xilinx-nwl: Modify ECAM size in the DT example
PCI: xilinx-nwl: Remove redundant code that sets Type 1 header fields
PCI: hotplug: Add Ampere Altra Attention Indicator extension driver
PCI/AER: Factor out interrupt toggling into helpers
PCI: acpiphp: Allow built-in drivers for Attention Indicators
PCI/portdrv: Use FIELD_GET()
PCI/VC: Use FIELD_GET()
PCI/PTM: Use FIELD_GET()
PCI/PME: Use FIELD_GET()
PCI/ATS: Use FIELD_GET()
PCI/ATS: Show PASID Capability register width in bitmasks
PCI/ASPM: Fix L1 substate handling in aspm_attr_store_common()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull ext2, udf, and quota updates from Jan Kara:
- conversion of ext2 directory code to use folios
- cleanups in UDF declarations
- bugfix for quota interaction with file encryption
* tag 'fs_for_v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
ext2: Convert ext2_prepare_chunk and ext2_commit_chunk to folios
ext2: Convert ext2_make_empty() to use a folio
ext2: Convert ext2_unlink() and ext2_rename() to use folios
ext2: Convert ext2_delete_entry() to use folios
ext2: Convert ext2_empty_dir() to use a folio
ext2: Convert ext2_add_link() to use a folio
ext2: Convert ext2_readdir to use a folio
ext2: Add ext2_get_folio()
ext2: Convert ext2_check_page to ext2_check_folio
highmem: Add folio_release_kmap()
udf: Avoid unneeded variable length array in struct fileIdentDesc
udf: Annotate struct udf_bitmap with __counted_by
quota: explicitly forbid quota files from being encrypted
|
|
V3D 7.x takes a new parameter to configure TFU jobs that needs
to be provided by user space.
Signed-off-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231031073859.25298-2-itoral@igalia.com
|
|
This function takes a pointer to a pointer, unlike sprintf() which is
passed a plain pointer. Fix up the documentation to make this clear.
Fixes: 7888fe53b706 ("ethtool: Add common function for filling out strings")
Cc: Alexander Duyck <alexanderduyck@fb.com>
Cc: Justin Stitt <justinstitt@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20231028192511.100001-1-andrew@lunn.ch
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
I am looking at syzbot reports triggering kernel stack overflows
involving a cascade of ipvlan devices.
We can save 8 bytes in struct flowi_common.
This patch alone will not fix the issue, but is a start.
Fixes: 24ba14406c5c ("route: Add multipath_hash in flowi_common to make user-define hash")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: wenxu <wenxu@ucloud.cn>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20231025141037.3448203-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull modules updates from Luis Chamberlain:
"The only thing worth highligthing is that gzip moves to use vmalloc()
instead of kmalloc just as we had a fix for this for zstd on v6.6-rc1.
The rest is regular house keeping, keeping things neat, tidy, and
boring"
[ The kmalloc -> vmalloc conversion is not the right approach.
Unless you know you need huge areas or know you need to use virtual
mappings for some reason (playing with protection bits or whatever),
you should use kvmalloc()/kvfree, which automatically picks the right
allocation model - Linus ]
* tag 'modules-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
module: Annotate struct module_notes_attrs with __counted_by
module: Fix comment typo
module: Make is_valid_name() return bool
module: Make is_mapping_symbol() return bool
module/decompress: use vmalloc() for gzip decompression workspace
MAINTAINERS: add include/linux/module*.h to modules
module: Clarify documentation of module_param_call()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull sysctl updates from Luis Chamberlain:
"To help make the move of sysctls out of kernel/sysctl.c not incur a
size penalty sysctl has been changed to allow us to not require the
sentinel, the final empty element on the sysctl array. Joel Granados
has been doing all this work. On the v6.6 kernel we got the major
infrastructure changes required to support this. For v6.7-rc1 we have
all arch/ and drivers/ modified to remove the sentinel. Both arch and
driver changes have been on linux-next for a bit less than a month. It
is worth re-iterating the value:
- this helps reduce the overall build time size of the kernel and run
time memory consumed by the kernel by about ~64 bytes per array
- the extra 64-byte penalty is no longer inncurred now when we move
sysctls out from kernel/sysctl.c to their own files
For v6.8-rc1 expect removal of all the sentinels and also then the
unneeded check for procname == NULL.
The last two patches are fixes recently merged by Krister Johansen
which allow us again to use softlockup_panic early on boot. This used
to work but the alias work broke it. This is useful for folks who want
to detect softlockups super early rather than wait and spend money on
cloud solutions with nothing but an eventual hung kernel. Although
this hadn't gone through linux-next it's also a stable fix, so we
might as well roll through the fixes now"
* tag 'sysctl-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux: (23 commits)
watchdog: move softlockup_panic back to early_param
proc: sysctl: prevent aliased sysctls from getting passed to init
intel drm: Remove now superfluous sentinel element from ctl_table array
Drivers: hv: Remove now superfluous sentinel element from ctl_table array
raid: Remove now superfluous sentinel element from ctl_table array
fw loader: Remove the now superfluous sentinel element from ctl_table array
sgi-xp: Remove the now superfluous sentinel element from ctl_table array
vrf: Remove the now superfluous sentinel element from ctl_table array
char-misc: Remove the now superfluous sentinel element from ctl_table array
infiniband: Remove the now superfluous sentinel element from ctl_table array
macintosh: Remove the now superfluous sentinel element from ctl_table array
parport: Remove the now superfluous sentinel element from ctl_table array
scsi: Remove now superfluous sentinel element from ctl_table array
tty: Remove now superfluous sentinel element from ctl_table array
xen: Remove now superfluous sentinel element from ctl_table array
hpet: Remove now superfluous sentinel element from ctl_table array
c-sky: Remove now superfluous sentinel element from ctl_talbe array
powerpc: Remove now superfluous sentinel element from ctl_table arrays
riscv: Remove now superfluous sentinel element from ctl_table array
x86/vdso: Remove now superfluous sentinel element from ctl_table array
...
|
|
Not all uses of __diag_ignore_all(...) in BPF-related code in order to
suppress warnings are wrapping kfunc definitions. Some "hook point"
definitions - small functions meant to be used as attach points for
fentry and similar BPF progs - need to suppress -Wmissing-declarations.
We could use __bpf_kfunc_{start,end}_defs added in the previous patch in
such cases, but this might be confusing to someone unfamiliar with BPF
internals. Instead, this patch adds __bpf_hook_{start,end} macros,
currently having the same effect as __bpf_kfunc_{start,end}_defs, then
uses them to suppress warnings for two hook points in the kernel itself
and some bpf_testmod hook points as well.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Cc: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/r/20231031215625.2343848-2-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
BPF kfuncs are meant to be called from BPF programs. Accordingly, most
kfuncs are not called from anywhere in the kernel, which the
-Wmissing-prototypes warning is unhappy about. We've peppered
__diag_ignore_all("-Wmissing-prototypes", ... everywhere kfuncs are
defined in the codebase to suppress this warning.
This patch adds two macros meant to bound one or many kfunc definitions.
All existing kfunc definitions which use these __diag calls to suppress
-Wmissing-prototypes are migrated to use the newly-introduced macros.
A new __diag_ignore_all - for "-Wmissing-declarations" - is added to the
__bpf_kfunc_start_defs macro based on feedback from Andrii on an earlier
version of this patch [0] and another recent mailing list thread [1].
In the future we might need to ignore different warnings or do other
kfunc-specific things. This change will make it easier to make such
modifications for all kfunc defs.
[0]: https://lore.kernel.org/bpf/CAEf4BzaE5dRWtK6RPLnjTW-MW9sx9K3Fn6uwqCTChK2Dcb1Xig@mail.gmail.com/
[1]: https://lore.kernel.org/bpf/ZT+2qCc%2FaXep0%2FLf@krava/
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Cc: Jiri Olsa <olsajiri@gmail.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: David Vernet <void@manifault.com>
Acked-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/r/20231031215625.2343848-1-davemarchevsky@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The callback function that is used to create inodes and dentries is not
protected by anything and the data that is passed to it could become
stale. After eventfs_remove_dir() is called by the tracing system, it is
free to remove the events that are associated to that directory.
Unfortunately, that means the callbacks must not be called after that.
CPU0 CPU1
---- ----
eventfs_root_lookup() {
eventfs_remove_dir() {
mutex_lock(&event_mutex);
ei->is_freed = set;
mutex_unlock(&event_mutex);
}
kfree(event_call);
for (...) {
entry = &ei->entries[i];
r = entry->callback() {
call = data; // call == event_call above
if (call->flags ...)
[ USE AFTER FREE BUG ]
The safest way to protect this is to wrap the callback with:
mutex_lock(&eventfs_mutex);
if (!ei->is_freed)
r = entry->callback();
else
r = -1;
mutex_unlock(&eventfs_mutex);
This will make sure that the callback will not be called after it is
freed. But now it needs to be known that the callback is called while
holding internal eventfs locks, and that it must not call back into the
eventfs / tracefs system. There's no reason it should anyway, but document
that as well.
Link: https://lore.kernel.org/all/CA+G9fYu9GOEbD=rR5eMR-=HJ8H6rMsbzDC2ZY5=Y50WpWAE7_Q@mail.gmail.com/
Link: https://lkml.kernel.org/r/20231101172649.906696613@goodmis.org
Cc: Ajay Kaher <akaher@vmware.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Fixes: 5790b1fb3d672 ("eventfs: Remove eventfs_file and just use eventfs_inode")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
The following can crash the kernel:
# cd /sys/kernel/tracing
# echo 'p:sched schedule' > kprobe_events
# exec 5>>events/kprobes/sched/enable
# > kprobe_events
# exec 5>&-
The above commands:
1. Change directory to the tracefs directory
2. Create a kprobe event (doesn't matter what one)
3. Open bash file descriptor 5 on the enable file of the kprobe event
4. Delete the kprobe event (removes the files too)
5. Close the bash file descriptor 5
The above causes a crash!
BUG: kernel NULL pointer dereference, address: 0000000000000028
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP PTI
CPU: 6 PID: 877 Comm: bash Not tainted 6.5.0-rc4-test-00008-g2c6b6b1029d4-dirty #186
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
RIP: 0010:tracing_release_file_tr+0xc/0x50
What happens here is that the kprobe event creates a trace_event_file
"file" descriptor that represents the file in tracefs to the event. It
maintains state of the event (is it enabled for the given instance?).
Opening the "enable" file gets a reference to the event "file" descriptor
via the open file descriptor. When the kprobe event is deleted, the file is
also deleted from the tracefs system which also frees the event "file"
descriptor.
But as the tracefs file is still opened by user space, it will not be
totally removed until the final dput() is called on it. But this is not
true with the event "file" descriptor that is already freed. If the user
does a write to or simply closes the file descriptor it will reference the
event "file" descriptor that was just freed, causing a use-after-free bug.
To solve this, add a ref count to the event "file" descriptor as well as a
new flag called "FREED". The "file" will not be freed until the last
reference is released. But the FREE flag will be set when the event is
removed to prevent any more modifications to that event from happening,
even if there's still a reference to the event "file" descriptor.
Link: https://lore.kernel.org/linux-trace-kernel/20231031000031.1e705592@gandalf.local.home/
Link: https://lore.kernel.org/linux-trace-kernel/20231031122453.7a48b923@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Mark Rutland <mark.rutland@arm.com>
Fixes: f5ca233e2e66d ("tracing: Increase trace array ref count on enable and filter files")
Reported-by: Beau Belgrave <beaub@linux.microsoft.com>
Tested-by: Beau Belgrave <beaub@linux.microsoft.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
Pull documentation updates from Jonathan Corbet:
"The number of commits for documentation is not huge this time around,
but there are some significant changes nonetheless:
- Some more Spanish-language and Chinese translations
- The much-discussed documentation of the confidential-computing
threat model
- Powerpc and RISCV documentation move under Documentation/arch -
these complete this particular bit of documentation churn
- A large traditional-Chinese documentation update
- A new document on backporting and conflict resolution
- Some kernel-doc and Sphinx fixes
Plus the usual smattering of smaller updates and typo fixes"
* tag 'docs-6.7' of git://git.lwn.net/linux: (40 commits)
scripts/kernel-doc: Fix the regex for matching -Werror flag
docs: backporting: address feedback
Documentation: driver-api: pps: Update PPS generator documentation
speakup: Document USB support
doc: blk-ioprio: Bring the doc in line with the implementation
docs: usb: fix reference to nonexistent file in UVC Gadget
docs: doc-guide: mention 'make refcheckdocs'
Documentation: fix typo in dynamic-debug howto
scripts/kernel-doc: match -Werror flag strictly
Documentation/sphinx: Remove the repeated word "the" in comments.
docs: sparse: add SPDX-License-Identifier
docs/zh_CN: Add subsystem-apis Chinese translation
docs/zh_TW: update contents for zh_TW
docs: submitting-patches: encourage direct notifications to commenters
docs: add backporting and conflict resolution document
docs: move riscv under arch
docs: update link to powerpc/vmemmap_dedup.rst
mm/memory-hotplug: fix typo in documentation
docs: move powerpc under arch
PCI: Update the devres documentation regarding to pcim_*()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit updates from Shuah Khan:
- string-stream testing enhancements
- several fixes memory leaks
- fix to reset status during parameter handling
* tag 'linux_kselftest-kunit-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: test: Fix the possible memory leak in executor_test
kunit: Fix possible memory leak in kunit_filter_suites()
kunit: Fix the wrong kfree of copy for kunit_filter_suites()
kunit: Fix missed memory release in kunit_free_suite_set()
kunit: Reset test status on each param iteration
kunit: string-stream: Test performance of string_stream
kunit: Use string_stream for test log
kunit: string-stream: Add tests for freeing resource-managed string_stream
kunit: string-stream: Decouple string_stream from kunit
kunit: string-stream: Add kunit_alloc_string_stream()
kunit: Don't use a managed alloc in is_literal()
kunit: string-stream-test: Add cases for string_stream newline appending
kunit: string-stream: Add option to make all lines end with newline
kunit: string-stream: Improve testing of string_stream
kunit: string-stream: Don't create a fragment for empty strings
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd updates from Jason Gunthorpe:
"This brings three new iommufd capabilities:
- Dirty tracking for DMA.
AMD/ARM/Intel CPUs can now record if a DMA writes to a page in the
IOPTEs within the IO page table. This can be used to generate a
record of what memory is being dirtied by DMA activities during a
VM migration process. A VMM like qemu will combine the IOMMU dirty
bits with the CPU's dirty log to determine what memory to transfer.
VFIO already has a DMA dirty tracking framework that requires PCI
devices to implement tracking HW internally. The iommufd version
provides an alternative that the VMM can select, if available. The
two are designed to have very similar APIs.
- Userspace controlled attributes for hardware page tables
(HWPT/iommu_domain). There are currently a few generic attributes
for HWPTs (support dirty tracking, and parent of a nest). This is
an entry point for the userspace iommu driver to control the HW in
detail.
- Nested translation support for HWPTs. This is a 2D translation
scheme similar to the CPU where a DMA goes through a first stage to
determine an intermediate address which is then translated trough a
second stage to a physical address.
Like for CPU translation the first stage table would exist in VM
controlled memory and the second stage is in the kernel and matches
the VM's guest to physical map.
As every IOMMU has a unique set of parameter to describe the S1 IO
page table and its associated parameters the userspace IOMMU driver
has to marshal the information into the correct format.
This is 1/3 of the feature, it allows creating the nested
translation and binding it to VFIO devices, however the API to
support IOTLB and ATC invalidation of the stage 1 io page table,
and forwarding of IO faults are still in progress.
The series includes AMD and Intel support for dirty tracking. Intel
support for nested translation.
Along the way are a number of internal items:
- New iommu core items: ops->domain_alloc_user(),
ops->set_dirty_tracking, ops->read_and_clear_dirty(),
IOMMU_DOMAIN_NESTED, and iommu_copy_struct_from_user
- UAF fix in iopt_area_split()
- Spelling fixes and some test suite improvement"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: (52 commits)
iommufd: Organize the mock domain alloc functions closer to Joerg's tree
iommufd/selftest: Fix page-size check in iommufd_test_dirty()
iommufd: Add iopt_area_alloc()
iommufd: Fix missing update of domains_itree after splitting iopt_area
iommu/vt-d: Disallow read-only mappings to nest parent domain
iommu/vt-d: Add nested domain allocation
iommu/vt-d: Set the nested domain to a device
iommu/vt-d: Make domain attach helpers to be extern
iommu/vt-d: Add helper to setup pasid nested translation
iommu/vt-d: Add helper for nested domain allocation
iommu/vt-d: Extend dmar_domain to support nested domain
iommufd: Add data structure for Intel VT-d stage-1 domain allocation
iommu/vt-d: Enhance capability check for nested parent domain allocation
iommufd/selftest: Add coverage for IOMMU_HWPT_ALLOC with nested HWPTs
iommufd/selftest: Add nested domain allocation for mock domain
iommu: Add iommu_copy_struct_from_user helper
iommufd: Add a nested HW pagetable object
iommu: Pass in parent domain with user_data to domain_alloc_user op
iommufd: Share iommufd_hwpt_alloc with IOMMUFD_OBJ_HWPT_NESTED
iommufd: Derive iommufd_hwpt_paging from iommufd_hw_pagetable
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull more networking updates from Jakub Kicinski:
- Support GRO decapsulation for IPsec ESP in UDP
- Add a handful of MODULE_DESCRIPTION()s
- Drop questionable alignment check in TCP AO to avoid
build issue after changes in the crypto tree
* tag 'net-next-6.7-followup' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next:
net: tcp: remove call to obsolete crypto_ahash_alignmask()
net: fill in MODULE_DESCRIPTION()s under drivers/net/
net: fill in MODULE_DESCRIPTION()s under net/802*
net: fill in MODULE_DESCRIPTION()s under net/core
net: fill in MODULE_DESCRIPTION()s in kuba@'s modules
xfrm: policy: fix layer 4 flowi decoding
xfrm Fix use after free in __xfrm6_udp_encap_rcv.
xfrm: policy: replace session decode with flow dissector
xfrm: move mark and oif flowi decode into common code
xfrm: pass struct net to xfrm_decode_session wrappers
xfrm: Support GRO for IPv6 ESP in UDP encapsulation
xfrm: Support GRO for IPv4 ESP in UDP encapsulation
xfrm: Use the XFRM_GRO to indicate a GRO call on input
xfrm: Annotate struct xfrm_sec_ctx with __counted_by
xfrm: Remove unused function declarations
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes updates from Masami Hiramatsu:
"Cleanups:
- kprobes: Fixes typo in kprobes samples
- tracing/eprobes: Remove 'break' after return
kretprobe/fprobe performance improvements:
- lib: Introduce new `objpool`, which is a high performance lockless
object queue. This uses per-cpu ring array to allocate/release
objects from the pre-allocated object pool.
Since the index of ring array is a 32bit sequential counter, we can
retry to push/pop the object pointer from the ring without lock (as
seq-lock does)
- lib: Add an objpool test module to test the functionality and
evaluate the performance under some circumstances
- kprobes/fprobe: Improve kretprobe and rethook scalability
performance with objpool.
This improves both legacy kretprobe and fprobe exit handler (which
is based on rethook) to be scalable on SMP systems. Even with
8-threads parallel test, it shows a great scalability improvement
- Remove unneeded freelist.h which is replaced by objpool
- objpool: Add maintainers entry for the objpool
- objpool: Fix to remove unused include header lines"
* tag 'probes-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
kprobes: unused header files removed
MAINTAINERS: objpool added
kprobes: freelist.h removed
kprobes: kretprobe scalability improvement
lib: objpool test module added
lib: objpool added: ring-array based lockless MPMC
tracing/eprobe: drop unneeded breaks
samples: kprobes: Fixes a typo
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into drm-next
drm: renesas: shmobile: Atomic conversion + DT support
Currently, there are two drivers for the LCD controller on Renesas
SuperH-based and ARM-based SH-Mobile and R-Mobile SoCs:
1. sh_mobile_lcdcfb, using the fbdev framework,
2. shmob_drm, using the DRM framework.
However, only the former driver is used, as all platform support
integrates the former. None of these drivers support DT-based systems.
Convert the SH-Mobile DRM driver to atomic modesetting, and add DT
support, complemented by the customary set of fixes and improvements.
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/cover.1694767208.git.geert+renesas@glider.be/
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://patchwork.freedesktop.org/patch/msgid/CAMuHMdUF61V5qNyKbrTGxZfEJvCVuLO7q2R5MqZYkzRC_cNr0w@mail.gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull ia64 removal and asm-generic updates from Arnd Bergmann:
- The ia64 architecture gets its well-earned retirement as planned,
now that there is one last (mostly) working release that will be
maintained as an LTS kernel.
- The architecture specific system call tables are updated for the
added map_shadow_stack() syscall and to remove references to the
long-gone sys_lookup_dcookie() syscall.
* tag 'asm-generic-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
hexagon: Remove unusable symbols from the ptrace.h uapi
asm-generic: Fix spelling of architecture
arch: Reserve map_shadow_stack() syscall number for all architectures
syscalls: Cleanup references to sys_lookup_dcookie()
Documentation: Drop or replace remaining mentions of IA64
lib/raid6: Drop IA64 support
Documentation: Drop IA64 from feature descriptions
kernel: Drop IA64 support from sig_fault handlers
arch: Remove Itanium (IA-64) architecture
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"The highlights for the driver support this time are
- Qualcomm platforms gain support for the Qualcomm Secure Execution
Environment firmware interface to access EFI variables on certain
devices, and new features for multiple platform and firmware
drivers.
- Arm FF-A firmware support gains support for v1.1 specification
features, in particular notification and memory transaction
descriptor changes.
- SCMI firmware support now support v3.2 features for clock and DVFS
configuration and a new transport for Qualcomm platforms.
- Minor cleanups and bugfixes are added to pretty much all the active
platforms: qualcomm, broadcom, dove, ti-k3, rockchip, sifive,
amlogic, atmel, tegra, aspeed, vexpress, mediatek, samsung and
more.
In particular, this contains portions of the treewide conversion to
use __counted_by annotations and the device_get_match_data helper"
* tag 'soc-drivers-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (156 commits)
soc: qcom: pmic_glink_altmode: Print return value on error
firmware: qcom: scm: remove unneeded 'extern' specifiers
firmware: qcom: scm: add a missing forward declaration for struct device
firmware: qcom: move Qualcomm code into its own directory
soc: samsung: exynos-chipid: Convert to platform remove callback returning void
soc: qcom: apr: Add __counted_by for struct apr_rx_buf and use struct_size()
soc: qcom: pmic_glink: fix connector type to be DisplayPort
soc: ti: k3-socinfo: Avoid overriding return value
soc: ti: k3-socinfo: Fix typo in bitfield documentation
soc: ti: knav_qmss_queue: Use device_get_match_data()
firmware: ti_sci: Use device_get_match_data()
firmware: qcom: qseecom: add missing include guards
soc/pxa: ssp: Convert to platform remove callback returning void
soc/mediatek: mtk-mmsys: Convert to platform remove callback returning void
soc/mediatek: mtk-devapc: Convert to platform remove callback returning void
soc/loongson: loongson2_guts: Convert to platform remove callback returning void
soc/litex: litex_soc_ctrl: Convert to platform remove callback returning void
soc/ixp4xx: ixp4xx-qmgr: Convert to platform remove callback returning void
soc/ixp4xx: ixp4xx-npe: Convert to platform remove callback returning void
soc/hisilicon: kunpeng_hccs: Convert to platform remove callback returning void
...
|
|
Pull VFIO updates from Alex Williamson:
- Add support for "chunk mode" in the mlx5-vfio-pci variant driver,
which allows both larger device image sizes for migration, beyond the
previous 4GB limit, and also read-ahead support for improved
migration performance (Yishai Hadas)
- A new bus master control interface for the CDX bus driver where there
is no in-band mechanism to toggle device DMA as there is through
config space on PCI devices (Nipun Gupta)
- Add explicit alignment directives to vfio data structures to reduce
the chance of breaking 32-bit userspace. In most cases this is
transparent and the remaining cases where data structures are padded
work within the existing rules for extending data structures within
vfio (Stefan Hajnoczi)
- Resolve a bug in the cdx bus driver noted when compiled with clang
where missing parenthesis result in the wrong operation (Nathan
Chancellor)
- Resolve errors reported by smatch for a function when dealing with
invalid inputs (Alex Williamson)
- Add migration support to the mtty vfio/mdev sample driver for testing
and integration purposes, allowing CI of migration without specific
hardware requirements. Also resolve many of the short- comings of
this driver relative to implementation of the vfio interrupt ioctl
along the way (Alex Williamson)
* tag 'vfio-v6.7-rc1' of https://github.com/awilliam/linux-vfio:
vfio/mtty: Enable migration support
vfio/mtty: Overhaul mtty interrupt handling
vfio: Fix smatch errors in vfio_combine_iova_ranges()
vfio/cdx: Add parentheses between bitwise AND expression and logical NOT
vfio/mlx5: Activate the chunk mode functionality
vfio/mlx5: Add support for READING in chunk mode
vfio/mlx5: Add support for SAVING in chunk mode
vfio/mlx5: Pre-allocate chunks for the STOP_COPY phase
vfio/mlx5: Rename some stuff to match chunk mode
vfio/mlx5: Enable querying state size which is > 4GB
vfio/mlx5: Refactor the SAVE callback to activate a work only upon an error
vfio/mlx5: Wake up the reader post of disabling the SAVING migration file
vfio: use __aligned_u64 in struct vfio_device_ioeventfd
vfio: use __aligned_u64 in struct vfio_device_gfx_plane_info
vfio: trivially use __aligned_u64 for ioctl structs
vfio-cdx: add bus mastering device feature support
vfio: add bus master feature to device feature ioctl
cdx: add support for bus mastering
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain updates from Ulf Hansson:
- Move Kconfig files into the pmdomain subsystem
- Drop use of genpd's redundant ->opp_to_performance_state() callback
- amlogic:
- Add support for the T7 power-domains controller
- Fix mask for the second NNA mem power-domain
- bcm: Fixup ASB register read and comparison for bcm2835-power
- imx: Fix device link problem for consumers of the pgc power-domain
- mediatek: Add support for the MT8365 power domains
- qcom:
- Add support for the rpmhpds for SC8380XP power-domains
- Add support for the rpmhpds for SM8650 power-domains
- Add support for the rpmhpd clocks for SM7150
- Add support for the rpmpds for MSM8917 (families) power-domains
- starfive: Add support for the JH7110 AON PMU
* tag 'pmdomain-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (56 commits)
pmdomain: amlogic: Fix mask for the second NNA mem PD domain
pmdomain: qcom: rpmhpd: Add SC8380XP power domains
pmdomain: qcom: rpmhpd: Add SM8650 RPMh Power Domains
dt-bindings: power: rpmpd: Add SC8380XP support
dt-bindings: power: qcom,rpmhpd: Add GMXC PD index
dt-bindings: power: qcom,rpmpd: document the SM8650 RPMh Power Domains
pmdomain: imx: Make imx pgc power domain also set the fwnode
pmdomain: qcom: rpmpd: Add QM215 power domains
pmdomain: qcom: rpmpd: Add MSM8917 power domains
dt-bindings: power: rpmpd: Add MSM8917, MSM8937 and QM215
pmdomain: bcm: bcm2835-power: check if the ASB register is equal to enable
pmdomain: qcom: rpmhpd: Drop the ->opp_to_performance_state() callback
pmdomain: qcom: rpmpd: Drop the ->opp_to_performance_state() callback
pmdomain: qcom: cpr: Drop the ->opp_to_performance_state() callback
pmdomain: Use device_get_match_data()
pmdomain: ti: add missing of_node_put
pmdomain: mediatek: Add support for MT8365
pmdomain: mediatek: Add support for MTK_SCPD_STRICT_BUS_PROTECTION cap
pmdomain: mediatek: Add support for WAY_EN operations
pmdomain: mediatek: Unify configuration for infracfg and smi
...
|
|
Pull MMC updates from Ulf Hansson:
" MMC core:
- Enable host caps to be modified via debugfs to test speed-modes
- Improve random I/O writes for 4k buffers for hsq enabled hosts
MMC host:
- atmel-mci/sdhci-of-at91: Aubin Constans takes over as maintainer
- dw_mmc-starfive: Re-work tuning support
- meson-gx: Fix bogus IRQ when using CMD_CFG_ERROR
- mmci: Use peripheral flow control for the STM32 variant
- renesas,sdhi: Add support for the RZ/G3S variant
- sdhci-esdhc-imx: Optimize the manual tuning logic
- sdhci-msm: Add support for the SM8650 variant
- sdhci-npcm: Add driver to support the Nuvoton NPCM BMC variant
- sdhci-pci-gli: Add workaround to allow GL9750 to enter ASPM L1.2"
* tag 'mmc-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (25 commits)
dt-bindings: mmc: sdhci-msm: document the SM8650 SDHCI Controller
mmc: meson-gx: Remove setting of CMD_CFG_ERROR
MAINTAINERS: mmc: take over as maintainer of MCI & SDHCI MICROCHIP DRIVERS
mmc: jz4740: Use device_get_match_data()
mmc: sdhci-npcm: Add NPCM SDHCI driver
dt-bindings: mmc: npcm,sdhci: Document NPCM SDHCI controller
mmc: sdhci-pltfm: Make driver OF independent
mmc: sdhci-pltfm: Drop unnecessary error messages in sdhci_pltfm_init()
mmc: sdhci-pci: Switch to use acpi_evaluate_dsm_typed()
mmc: debugfs: Allow host caps to be modified
mmc: core: Always reselect card type
mmc: mmci: use peripheral flow control for STM32
mmc: vub300: replace deprecated strncpy with strscpy
memstick: jmb38x_ms: Annotate struct jmb38x_ms with __counted_by
mmc: starfive: Change tuning implementation
dt-bindings: mmc: starfive: Remove properties from required
mmc: hsq: Improve random I/O write performance for 4k buffers
mmc: core: Allow dynamical updates of the number of requests for hsq
mmc: sdhci-pci-gli: A workaround to allow GL9750 to enter ASPM L1.2
dt-bindings: mmc: renesas,sdhi: Document RZ/G3S support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ATA updates from Damien Le Moal:
- Modify the AHCI driver to print the link power management policy used
on scan, to help with debugging issues (Niklas)
- Add support for the ASM2116 series adapters to the AHCI driver
(Szuying)
- Prepare libata for the coming gcc and Clang __counted_by attribute
(Kees)
- Following the recent estensive fixing of libata suspend/resume
handling, several patches further cleanup and improve disk power
state management (me)
- Reduce the verbosity of some error messages for non-fatal temporary
errors, e.g. slow response to device reset when scanning a port, and
warning messages that are in fact normal, e.g. disabling a device on
suspend or when removing it (me)
- Cleanup DMA helper functions (me)
- Fix sata_mv drive handling of potential errors durring probe (Ma)
- Cleanup the xgene and imx drivers using the functions
of_device_get_match_data() and device_get_match_data() (Rob)
- Improve the tegra driver device tree (Rob)
* tag 'ata-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: (22 commits)
dt-bindings: ata: tegra: Disallow undefined properties
ata: libata-core: Improve ata_dev_power_set_active()
ata: libata-eh: Spinup disk on resume after revalidation
ata: imx: Use device_get_match_data()
ata: xgene: Use of_device_get_match_data()
ata: sata_mv: aspeed: fix value check in mv_platform_probe()
ata: ahci: Add Intel Alder Lake-P AHCI controller to low power chipsets list
ata: libata: Cleanup inline DMA helper functions
ata: libata-eh: Reduce "disable device" message verbosity
ata: libata-eh: Improve reset error messages
ata: libata-sata: Improve ata_sas_slave_configure()
ata: libata-core: Do not resume runtime suspended ports
ata: libata-core: Do not poweroff runtime suspended ports
ata: libata-core: Remove ata_port_resume_async()
ata: libata-core: Remove ata_port_suspend_async()
ata: libata-core: Detach a port devices on shutdown
ata: libata-core: Synchronize ata_port_detach() with hotplug
ata: libata-scsi: Cleanup ata_scsi_start_stop_xlat()
scsi: Remove scsi device no_start_on_resume flag
ata: libata: Annotate struct ata_cpr_log with __counted_by
...
|
|
Pull block updates from Jens Axboe:
- Improvements to the queue_rqs() support, and adding null_blk support
for that as well (Chengming)
- Series improving badblocks support (Coly)
- Key store support for sed-opal (Greg)
- IBM partition string handling improvements (Jan)
- Make number of ublk devices supported configurable (Mike)
- Cancelation improvements for ublk (Ming)
- MD pull requests via Song:
- Handle timeout in md-cluster, by Denis Plotnikov
- Cleanup pers->prepare_suspend, by Yu Kuai
- Rewrite mddev_suspend(), by Yu Kuai
- Simplify md_seq_ops, by Yu Kuai
- Reduce unnecessary locking array_state_store(), by Mariusz
Tkaczyk
- Make rdev add/remove independent from daemon thread, by Yu Kuai
- Refactor code around quiesce() and mddev_suspend(), by Yu Kuai
- NVMe pull request via Keith:
- nvme-auth updates (Mark)
- nvme-tcp tls (Hannes)
- nvme-fc annotaions (Kees)
- Misc cleanups and improvements (Jiapeng, Joel)
* tag 'for-6.7/block-2023-10-30' of git://git.kernel.dk/linux: (95 commits)
block: ublk_drv: Remove unused function
md: cleanup pers->prepare_suspend()
nvme-auth: allow mixing of secret and hash lengths
nvme-auth: use transformed key size to create resp
nvme-auth: alloc nvme_dhchap_key as single buffer
nvmet-tcp: use 'spin_lock_bh' for state_lock()
powerpc/pseries: PLPKS SED Opal keystore support
block: sed-opal: keystore access for SED Opal keys
block:sed-opal: SED Opal keystore
ublk: simplify aborting request
ublk: replace monitor with cancelable uring_cmd
ublk: quiesce request queue when aborting queue
ublk: rename mm_lock as lock
ublk: move ublk_cancel_dev() out of ub->mutex
ublk: make sure io cmd handled in submitter task context
ublk: don't get ublk device reference in ublk_abort_queue()
ublk: Make ublks_max configurable
ublk: Limit dev_id/ub_number values
md-cluster: check for timeout while a new disk adding
nvme: rework NVME_AUTH Kconfig selection
...
|
|
Add a helper whereby a driver can invoke TDR immediately.
v2:
- Drop timeout args, rename function, use mod delayed work (Luben)
v3:
- s/XE/Xe (Luben)
- present tense in commit message (Luben)
- Adjust comment for drm_sched_tdr_queue_imm (Luben)
v4:
- Adjust commit message (Luben)
Cc: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Link: https://lore.kernel.org/r/20231031032439.1558703-6-matthew.brost@intel.com
Signed-off-by: Luben Tuikov <ltuikov89@gmail.com>
|
|
Rather than call free_job and run_job in same work item have a dedicated
work item for each. This aligns with the design and intended use of work
queues.
v2:
- Test for DMA_FENCE_FLAG_TIMESTAMP_BIT before setting
timestamp in free_job() work item (Danilo)
v3:
- Drop forward dec of drm_sched_select_entity (Boris)
- Return in drm_sched_run_job_work if entity NULL (Boris)
v4:
- Replace dequeue with peek and invert logic (Luben)
- Wrap to 100 lines (Luben)
- Update comments for *_queue / *_queue_if_ready functions (Luben)
v5:
- Drop peek argument, blindly reinit idle (Luben)
- s/drm_sched_free_job_queue_if_ready/drm_sched_free_job_queue_if_done (Luben)
- Update work_run_job & work_free_job kernel doc (Luben)
v6:
- Do not move drm_sched_select_entity in file (Luben)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20231031032439.1558703-4-matthew.brost@intel.com
Reviewed-by: Luben Tuikov <ltuikov89@gmail.com>
Signed-off-by: Luben Tuikov <ltuikov89@gmail.com>
|
|
In Xe, the new Intel GPU driver, a choice has made to have a 1 to 1
mapping between a drm_gpu_scheduler and drm_sched_entity. At first this
seems a bit odd but let us explain the reasoning below.
1. In Xe the submission order from multiple drm_sched_entity is not
guaranteed to be the same completion even if targeting the same hardware
engine. This is because in Xe we have a firmware scheduler, the GuC,
which allowed to reorder, timeslice, and preempt submissions. If a using
shared drm_gpu_scheduler across multiple drm_sched_entity, the TDR falls
apart as the TDR expects submission order == completion order. Using a
dedicated drm_gpu_scheduler per drm_sched_entity solve this problem.
2. In Xe submissions are done via programming a ring buffer (circular
buffer), a drm_gpu_scheduler provides a limit on number of jobs, if the
limit of number jobs is set to RING_SIZE / MAX_SIZE_PER_JOB we get flow
control on the ring for free.
A problem with this design is currently a drm_gpu_scheduler uses a
kthread for submission / job cleanup. This doesn't scale if a large
number of drm_gpu_scheduler are used. To work around the scaling issue,
use a worker rather than kthread for submission / job cleanup.
v2:
- (Rob Clark) Fix msm build
- Pass in run work queue
v3:
- (Boris) don't have loop in worker
v4:
- (Tvrtko) break out submit ready, stop, start helpers into own patch
v5:
- (Boris) default to ordered work queue
v6:
- (Luben / checkpatch) fix alignment in msm_ringbuffer.c
- (Luben) s/drm_sched_submit_queue/drm_sched_wqueue_enqueue
- (Luben) Update comment for drm_sched_wqueue_enqueue
- (Luben) Positive check for submit_wq in drm_sched_init
- (Luben) s/alloc_submit_wq/own_submit_wq
v7:
- (Luben) s/drm_sched_wqueue_enqueue/drm_sched_run_job_queue
v8:
- (Luben) Adjust var names / comments
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Link: https://lore.kernel.org/r/20231031032439.1558703-3-matthew.brost@intel.com
Signed-off-by: Luben Tuikov <ltuikov89@gmail.com>
|
|
Add scheduler wqueue ready, stop, and start helpers to hide the
implementation details of the scheduler from the drivers.
v2:
- s/sched_wqueue/sched_wqueue (Luben)
- Remove the extra white line after the return-statement (Luben)
- update drm_sched_wqueue_ready comment (Luben)
Cc: Luben Tuikov <luben.tuikov@amd.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Luben Tuikov <luben.tuikov@amd.com>
Link: https://lore.kernel.org/r/20231031032439.1558703-2-matthew.brost@intel.com
Signed-off-by: Luben Tuikov <ltuikov89@gmail.com>
|
|
Pull io_uring futex support from Jens Axboe:
"This adds support for using futexes through io_uring - first futex
wake and wait, and then the vectored variant of waiting, futex waitv.
For both wait/wake/waitv, we support the bitset variant, as the
'normal' variants can be easily implemented on top of that.
PI and requeue are not supported through io_uring, just the above
mentioned parts. This may change in the future, but in the spirit of
keeping this small (and based on what people have been asking for),
this is what we currently have.
Wake support is pretty straight forward, most of the thought has gone
into the wait side to avoid needing to offload wait operations to a
blocking context. Instead, we rely on the usual callbacks to retry and
post a completion event, when appropriate.
As far as I can recall, the first request for futex support with
io_uring came from Andres Freund, working on postgres. His aio rework
of postgres was one of the early adopters of io_uring, and futex
support was a natural extension for that. This is relevant from both a
usability point of view, as well as for effiency and performance. In
Andres's words, for the former:
Futex wait support in io_uring makes it a lot easier to avoid
deadlocks in concurrent programs that have their own buffer pool:
Obviously pages in the application buffer pool have to be locked
during IO. If the initiator of IO A needs to wait for a held lock
B, the holder of lock B might wait for the IO A to complete. The
ability to wait for a lock and IO completions at the same time
provides an efficient way to avoid such deadlocks
and in terms of effiency, even without unlocking the full potential
yet, Andres says:
Futex wake support in io_uring is useful because it allows for more
efficient directed wakeups. For some "locks" postgres has queues
implemented in userspace, with wakeup logic that cannot easily be
implemented with FUTEX_WAKE_BITSET on a single "futex word"
(imagine waiting for journal flushes to have completed up to a
certain point).
Thus a "lock release" sometimes need to wake up many processes in a
row. A quick-and-dirty conversion to doing these wakeups via
io_uring lead to a 3% throughput increase, with 12% fewer context
switches, albeit in a fairly extreme workload"
* tag 'io_uring-futex-2023-10-30' of git://git.kernel.dk/linux:
io_uring: add support for vectored futex waits
futex: make the vectored futex operations available
futex: make futex_parse_waitv() available as a helper
futex: add wake_data to struct futex_q
io_uring: add support for futex wake and wait
futex: abstract out a __futex_wake_mark() helper
futex: factor out the futex wake handling
futex: move FUTEX2_VALID_MASK to futex.h
|
|
Pull io_uring {get,set}sockopt support from Jens Axboe:
"This adds support for using getsockopt and setsockopt via io_uring.
The main use cases for this is to enable use of direct descriptors,
rather than first instantiating a normal file descriptor, doing the
option tweaking needed, then turning it into a direct descriptor. With
this support, we can avoid needing a regular file descriptor
completely.
The net and bpf bits have been signed off on their side"
* tag 'for-6.7/io_uring-sockopt-2023-10-30' of git://git.kernel.dk/linux:
selftests/bpf/sockopt: Add io_uring support
io_uring/cmd: Introduce SOCKET_URING_OP_SETSOCKOPT
io_uring/cmd: Introduce SOCKET_URING_OP_GETSOCKOPT
io_uring/cmd: return -EOPNOTSUPP if net is disabled
selftests/net: Extract uring helpers to be reusable
tools headers: Grab copy of io_uring.h
io_uring/cmd: Pass compat mode in issue_flags
net/socket: Break down __sys_getsockopt
net/socket: Break down __sys_setsockopt
bpf: Add sockptr support for setsockopt
bpf: Add sockptr support for getsockopt
|
|
Pull io_uring updates from Jens Axboe:
"This contains the core io_uring updates, of which there are not many,
and adds support for using WAITID through io_uring and hence not
needing to block on these kinds of events.
Outside of that, tweaks to the legacy provided buffer handling and
some cleanups related to cancelations for uring_cmd support"
* tag 'for-6.7/io_uring-2023-10-30' of git://git.kernel.dk/linux:
io_uring/poll: use IOU_F_TWQ_LAZY_WAKE for wakeups
io_uring/kbuf: Use slab for struct io_buffer objects
io_uring/kbuf: Allow the full buffer id space for provided buffers
io_uring/kbuf: Fix check of BID wrapping in provided buffers
io_uring/rsrc: cleanup io_pin_pages()
io_uring: cancelable uring_cmd
io_uring: retain top 8bits of uring_cmd flags for kernel internal use
io_uring: add IORING_OP_WAITID support
exit: add internal include file with helpers
exit: add kernel_waitid_prepare() helper
exit: move core of do_wait() into helper
exit: abstract out should_wake helper for child_wait_callback()
io_uring/rw: add support for IORING_OP_READ_MULTISHOT
io_uring/rw: mark readv/writev as vectored in the opcode definition
io_uring/rw: split io_read() into a helper
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- two small cleanup patches
- a fix for PCI passthrough under Xen
- a four patch series speeding up virtio under Xen with user space
backends
* tag 'for-linus-6.7-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen-pciback: Consider INTx disabled when MSI/MSI-X is enabled
xen: privcmd: Add support for ioeventfd
xen: evtchn: Allow shared registration of IRQ handers
xen: irqfd: Use _IOW instead of the internal _IOC() macro
xen: Make struct privcmd_irqfd's layout architecture independent
xen/xenbus: Add __counted_by for struct read_buffer and use struct_size()
xenbus: fix error exit in xenbus_init()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
"Usual fixes and updates:
- Add up to 12 nops after TLB inserts for PA8x00 CPUs as the
specification requires (Dave Anglin)
- Simplify the parisc smp_prepare_boot_cpu() code (Russell King)
- Use 64-bit little-endian values in SBA IOMMU PDIR table for AGP
Since there is upcoming support for booting a 64-bit kernel on QEMU,
some corner cases were fixed and improvements added:
- Fix 64-bit kernel crash in STI (graphics console) font setup code
which miscalculated the font start address as it gets signed vs
unsigned offsets wrong
- Support building an uncompressed Linux kernel
- Add support for soft power-off in qemu"
* tag 'parisc-for-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
fbdev: stifb: Make the STI next font pointer a 32-bit signed offset
parisc: Show default CPU PSW.W setting as reported by PDC
parisc/pdc: Add width field to struct pdc_model
parisc: Add nop instructions after TLB inserts
parisc: simplify smp_prepare_boot_cpu()
parisc/agp: Use 64-bit LE values in SBA IOMMU PDIR table
parisc/firmware: Use PDC constants for narrow/wide firmware
parisc: Move parisc_narrow_firmware variable to header file
parisc/power: Trivial whitespace cleanups and license update
parisc/power: Add power soft-off when running on qemu
parisc: Allow building uncompressed Linux kernel
parisc: Add some missing PDC functions and constants
parisc: sba-iommu: Fix comment when calculating IOC number
|
|
The return value of is_mapping_symbol() is true or false,
so change its type to reflect that.
Suggested-by: Xi Zhang <zhangxi@kylinos.cn>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
Commit 9bbb9e5a3310 ("param: use ops in struct kernel_param, rather than
get and set fns directly") added the comment that module_param_call()
was deprecated, during a large scale refactoring to bring sanity to type
casting back then. In 2017 following more cleanups, it became useful
again as it wraps a common pattern of creating an ops struct for a
given get/set pair:
b2f270e87473 ("module: Prepare to convert all module_param_call() prototypes")
ece1996a21ee ("module: Do not paper over type mismatches in module_param_call()")
static const struct kernel_param_ops __param_ops_##name = \
{ .flags = 0, .set = _set, .get = _get }; \
__module_param_call(MODULE_PARAM_PREFIX, \
name, &__param_ops_##name, arg, perm, -1, 0)
__module_param_call(MODULE_PARAM_PREFIX, name, ops, arg, perm, -1, 0)
Many users of module_param_cb() appear to be almost universally
open-coding the same thing that module_param_call() does now. Don't
discourage[1] people from using module_param_call(): clarify the comment
to show that module_param_cb() is useful if you repeatedly use the same
pair of get/set functions.
[1] https://lore.kernel.org/lkml/202308301546.5C789E5EC@keescook/
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Johan Hovold <johan@kernel.org>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Nick Desaulniers <ndesaulniers@gooogle.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Joe Perches <joe@perches.com>
Cc: linux-modules@vger.kernel.org
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
Use the folio APIs, saving about four calls to compound_head().
Convert back to a page in each of the individual protocol implementations.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
RPC client pipefs dentries cleanup is in separated rpc_remove_pipedir()
workqueue,which takes care about pipefs superblock locking.
In some special scenarios, when kernel frees the pipefs sb of the
current client and immediately alloctes a new pipefs sb,
rpc_remove_pipedir function would misjudge the existence of pipefs
sb which is not the one it used to hold. As a result,
the rpc_remove_pipedir would clean the released freed pipefs dentries.
To fix this issue, rpc_remove_pipedir should check whether the
current pipefs sb is consistent with the original pipefs sb.
This error can be catched by KASAN:
=========================================================
[ 250.497700] BUG: KASAN: slab-use-after-free in dget_parent+0x195/0x200
[ 250.498315] Read of size 4 at addr ffff88800a2ab804 by task kworker/0:18/106503
[ 250.500549] Workqueue: events rpc_free_client_work
[ 250.501001] Call Trace:
[ 250.502880] kasan_report+0xb6/0xf0
[ 250.503209] ? dget_parent+0x195/0x200
[ 250.503561] dget_parent+0x195/0x200
[ 250.503897] ? __pfx_rpc_clntdir_depopulate+0x10/0x10
[ 250.504384] rpc_rmdir_depopulate+0x1b/0x90
[ 250.504781] rpc_remove_client_dir+0xf5/0x150
[ 250.505195] rpc_free_client_work+0xe4/0x230
[ 250.505598] process_one_work+0x8ee/0x13b0
...
[ 22.039056] Allocated by task 244:
[ 22.039390] kasan_save_stack+0x22/0x50
[ 22.039758] kasan_set_track+0x25/0x30
[ 22.040109] __kasan_slab_alloc+0x59/0x70
[ 22.040487] kmem_cache_alloc_lru+0xf0/0x240
[ 22.040889] __d_alloc+0x31/0x8e0
[ 22.041207] d_alloc+0x44/0x1f0
[ 22.041514] __rpc_lookup_create_exclusive+0x11c/0x140
[ 22.041987] rpc_mkdir_populate.constprop.0+0x5f/0x110
[ 22.042459] rpc_create_client_dir+0x34/0x150
[ 22.042874] rpc_setup_pipedir_sb+0x102/0x1c0
[ 22.043284] rpc_client_register+0x136/0x4e0
[ 22.043689] rpc_new_client+0x911/0x1020
[ 22.044057] rpc_create_xprt+0xcb/0x370
[ 22.044417] rpc_create+0x36b/0x6c0
...
[ 22.049524] Freed by task 0:
[ 22.049803] kasan_save_stack+0x22/0x50
[ 22.050165] kasan_set_track+0x25/0x30
[ 22.050520] kasan_save_free_info+0x2b/0x50
[ 22.050921] __kasan_slab_free+0x10e/0x1a0
[ 22.051306] kmem_cache_free+0xa5/0x390
[ 22.051667] rcu_core+0x62c/0x1930
[ 22.051995] __do_softirq+0x165/0x52a
[ 22.052347]
[ 22.052503] Last potentially related work creation:
[ 22.052952] kasan_save_stack+0x22/0x50
[ 22.053313] __kasan_record_aux_stack+0x8e/0xa0
[ 22.053739] __call_rcu_common.constprop.0+0x6b/0x8b0
[ 22.054209] dentry_free+0xb2/0x140
[ 22.054540] __dentry_kill+0x3be/0x540
[ 22.054900] shrink_dentry_list+0x199/0x510
[ 22.055293] shrink_dcache_parent+0x190/0x240
[ 22.055703] do_one_tree+0x11/0x40
[ 22.056028] shrink_dcache_for_umount+0x61/0x140
[ 22.056461] generic_shutdown_super+0x70/0x590
[ 22.056879] kill_anon_super+0x3a/0x60
[ 22.057234] rpc_kill_sb+0x121/0x200
Fixes: 0157d021d23a ("SUNRPC: handle RPC client pipefs dentries by network namespace aware routines")
Signed-off-by: felix <fuzhen5@huawei.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"No major architecture features this time around, just some new HWCAP
definitions, support for the Ampere SoC PMUs and a few fixes/cleanups.
The bulk of the changes is reworking of the CPU capability checking
code (cpus_have_cap() etc).
- Major refactoring of the CPU capability detection logic resulting
in the removal of the cpus_have_const_cap() function and migrating
the code to "alternative" branches where possible
- Backtrace/kgdb: use IPIs and pseudo-NMI
- Perf and PMU:
- Add support for Ampere SoC PMUs
- Multi-DTC improvements for larger CMN configurations with
multiple Debug & Trace Controllers
- Rework the Arm CoreSight PMU driver to allow separate
registration of vendor backend modules
- Fixes: add missing MODULE_DEVICE_TABLE to the amlogic perf
driver; use device_get_match_data() in the xgene driver; fix
NULL pointer dereference in the hisi driver caused by calling
cpuhp_state_remove_instance(); use-after-free in the hisi driver
- HWCAP updates:
- FEAT_SVE_B16B16 (BFloat16)
- FEAT_LRCPC3 (release consistency model)
- FEAT_LSE128 (128-bit atomic instructions)
- SVE: remove a couple of pseudo registers from the cpufeature code.
There is logic in place already to detect mismatched SVE features
- Miscellaneous:
- Reduce the default swiotlb size (currently 64MB) if no ZONE_DMA
bouncing is needed. The buffer is still required for small
kmalloc() buffers
- Fix module PLT counting with !RANDOMIZE_BASE
- Restrict CPU_BIG_ENDIAN to LLVM IAS 15.x or newer move
synchronisation code out of the set_ptes() loop
- More compact cpufeature displaying enabled cores
- Kselftest updates for the new CPU features"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (83 commits)
arm64: Restrict CPU_BIG_ENDIAN to GNU as or LLVM IAS 15.x or newer
arm64: module: Fix PLT counting when CONFIG_RANDOMIZE_BASE=n
arm64, irqchip/gic-v3, ACPI: Move MADT GICC enabled check into a helper
perf: hisi: Fix use-after-free when register pmu fails
drivers/perf: hisi_pcie: Initialize event->cpu only on success
drivers/perf: hisi_pcie: Check the type first in pmu::event_init()
arm64: cpufeature: Change DBM to display enabled cores
arm64: cpufeature: Display the set of cores with a feature
perf/arm-cmn: Enable per-DTC counter allocation
perf/arm-cmn: Rework DTC counters (again)
perf/arm-cmn: Fix DTC domain detection
drivers: perf: arm_pmuv3: Drop some unused arguments from armv8_pmu_init()
drivers: perf: arm_pmuv3: Read PMMIR_EL1 unconditionally
drivers/perf: hisi: use cpuhp_state_remove_instance_nocalls() for hisi_hns3_pmu uninit process
clocksource/drivers/arm_arch_timer: limit XGene-1 workaround
arm64: Remove system_uses_lse_atomics()
arm64: Mark the 'addr' argument to set_ptes() and __set_pte_at() as unused
drivers/perf: xgene: Use device_get_match_data()
perf/amlogic: add missing MODULE_DEVICE_TABLE
arm64/mm: Hoist synchronization out of set_ptes() loop
...
|
|
When the client is required to use TEST_STATEID to discover which
delegation(s) have been revoked, it may continually test delegations at the
head of the list if the server continues to be unsatisfied and send
SEQ4_STATUS_RECALLABLE_STATE_REVOKED. For a large number of delegations
this behavior is prone to live-lock because the client may never be able to
test and free revoked state at the end of the list since the
SEQ4_STATUS_RECALLABLE_STATE_REVOKED will cause us to flag delegations at
the head of the list to be tested. This problem is further exacerbated by
the state manager's willingness to be scheduled out on a busy system while
testing the list of delegations.
Keep a generation counter for each attempt to test all delegations, and
skip delegations that have already been tested in the current pass.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Tested-by: Torkil Svensgaard <torkil@drcmr.dk>
Tested-by: Ruben Vestergaard <rubenv@drcmr.dk>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
|
|
The code that checks for unknown boot options is unaware of the sysctl
alias facility, which maps bootparams to sysctl values. If a user sets
an old value that has a valid alias, a message about an invalid
parameter will be printed during boot, and the parameter will get passed
to init. Fix by checking for the existence of aliased parameters in the
unknown boot parameter code. If an alias exists, don't return an error
or pass the value to init.
Signed-off-by: Krister Johansen <kjlx@templeofstupid.com>
Cc: stable@vger.kernel.org
Fixes: 0a477e1ae21b ("kernel/sysctl: support handling command line aliases")
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
Pull drm updates from Dave Airlie:
"Highlights:
- AMD adds some more upcoming HW platforms
- Intel made Meteorlake stable and started adding Lunarlake
- nouveau has a bunch of display rework in prepartion for the NVIDIA
GSP firmware support
- msm adds a7xx support
- habanalabs has finished migration to accel subsystem
Detail summary:
kernel:
- add initial vmemdup-user-array
core:
- fix platform remove() to return void
- drm_file owner updated to reflect owner
- move size calcs to drm buddy allocator
- let GPUVM build as a module
- allow variable number of run-queues in scheduler
edid:
- handle bad h/v sync_end in EDIDs
panfrost:
- add Boris as maintainer
fbdev:
- use fb_ops helpers more
- only allow logo use from fbcon
- rename fb_pgproto to pgprot_framebuffer
- add HPD state to drm_connector_oob_hotplug_event
- convert to fbdev i/o mem helpers
i915:
- Enable meteorlake by default
- Early Xe2 LPD/Lunarlake display enablement
- Rework subplatforms into IP version checks
- GuC based TLB invalidation for Meteorlake
- Display rework for future Xe driver integration
- LNL FBC features
- LNL display feature capability reads
- update recommended fw versions for DG2+
- drop fastboot module parameter
- added deviceid for Arrowlake-S
- drop preproduction workarounds
- don't disable preemption for resets
- cleanup inlines in headers
- PXP firmware loading fix
- Fix sg list lengths
- DSC PPS state readout/verification
- Add more RPL P/U PCI IDs
- Add new DG2-G12 stepping
- DP enhanced framing support to state checker
- Improve shared link bandwidth management
- stop using GEM macros in display code
- refactor related code into display code
- locally enable W=1 warnings
- remove PSR watchdog timers on LNL
amdgpu:
- RAS/FRU EEPROM updatse
- IP discovery updatses
- GC 11.5 support
- DCN 3.5 support
- VPE 6.1 support
- NBIO 7.11 support
- DML2 support
- lots of IP updates
- use flexible arrays for bo list handling
- W=1 fixes
- Enable seamless boot in more cases
- Enable context type property for HDMI
- Rework GPUVM TLB flushing
- VCN IB start/size alignment fixes
amdkfd:
- GC 10/11 fixes
- GC 11.5 support
- use partial migration in GPU faults
radeon:
- W=1 Fixes
- fix some possible buffer overflow/NULL derefs
nouveau:
- update uapi for NO_PREFETCH
- scheduler/fence fixes
- rework suspend/resume for GSP-RM
- rework display in preparation for GSP-RM
habanalabs:
- uapi: expose tsc clock
- uapi: block access to eventfd through control device
- uapi: force dma-buf export to PAGE_SIZE alignments
- complete move to accel subsystem
- move firmware interface include files
- perform hard reset on PCIe AXI drain event
- optimise user interrupt handling
msm:
- DP: use existing helpers for DPCD
- DPU: interrupts reworked
- gpu: a7xx (a730/a740) support
- decouple msm_drv from kms for headless devices
mediatek:
- MT8188 dsi/dp/edp support
- DDP GAMMA - 12 bit LUT support
- connector dynamic selection capability
rockchip:
- rv1126 mipi-dsi/vop support
- add planar formats
ast:
- rename constants
panels:
- Mitsubishi AA084XE01
- JDI LPM102A188A
- LTK050H3148W-CTA6
ivpu:
- power management fixes
qaic:
- add detach slice bo api
komeda:
- add NV12 writeback
tegra:
- support NVSYNC/NHSYNC
- host1x suspend fixes
ili9882t:
- separate into own driver"
* tag 'drm-next-2023-10-31-1' of git://anongit.freedesktop.org/drm/drm: (1803 commits)
drm/amdgpu: Remove unused variables from amdgpu_show_fdinfo
drm/amdgpu: Remove duplicate fdinfo fields
drm/amd/amdgpu: avoid to disable gfxhub interrupt when driver is unloaded
drm/amdgpu: Add EXT_COHERENT support for APU and NUMA systems
drm/amdgpu: Retrieve CE count from ce_count_lo_chip in EccInfo table
drm/amdgpu: Identify data parity error corrected in replay mode
drm/amdgpu: Fix typo in IP discovery parsing
drm/amd/display: fix S/G display enablement
drm/amdxcp: fix amdxcp unloads incompletely
drm/amd/amdgpu: fix the GPU power print error in pm info
drm/amdgpu: Use pcie domain of xcc acpi objects
drm/amd: check num of link levels when update pcie param
drm/amdgpu: Add a read to GFX v9.4.3 ring test
drm/amd/pm: call smu_cmn_get_smc_version in is_mode1_reset_supported.
drm/amdgpu: get RAS poison status from DF v4_6_2
drm/amdgpu: Use discovery table's subrevision
drm/amd/display: 3.2.256
drm/amd/display: add interface to query SubVP status
drm/amd/display: Read before writing Backlight Mode Set Register
drm/amd/display: Disable SYMCLK32_SE RCO on DCN314
...
|
|
These are guest/host interfaces, so they belong in the header where e.g.
qemu will know to find them.
Note: we added a new structure as opposed to extending existing one
because someone might be relying on the size of the existing structure
staying unchanged. Add a warning to avoid using sizeof.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
|
|
Using .compat_reset op from the previous patch, the buggy .reset
behaviour can be kept as-is on older userspace apps, which don't ack the
IOTLB_PERSIST backend feature. As this compatibility quirk is limited to
those drivers that used to be buggy in the past, it won't affect change
the behaviour or affect ABI on the setups with API compliant driver.
The separation of .compat_reset from the regular .reset allows
vhost-vdpa able to know which driver had broken behaviour before, so it
can apply the corresponding compatibility quirk to the individual driver
whenever needed. Compared to overloading the existing .reset with
flags, .compat_reset won't cause any extra burden to the implementation
of every compliant driver.
[mst: squashed in two fixup commits]
Message-Id: <1697880319-4937-6-git-send-email-si-wei.liu@oracle.com>
Message-Id: <1698102863-21122-1-git-send-email-si-wei.liu@oracle.com>
Reported-by: Dragos Tatulea <dtatulea@nvidia.com>
Tested-by: Dragos Tatulea <dtatulea@nvidia.com>
Message-Id: <1698275594-19204-1-git-send-email-si-wei.liu@oracle.com>
Reported-by: Lei Yang <leiyang@redhat.com>
Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
|
