summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2018-07-27can: dev: enable multi-queue for SocketCAN devicesZhu Yi
The existing SocketCAN implementation provides alloc_candev() to allocate a CAN device using a single Tx and Rx queue. This can lead to priority inversion in case the single Tx queue is already full with low priority messages and a high priority message needs to be sent while the bus is fully loaded with medium priority messages. This problem can be solved by using the existing multi-queue support of the network subsytem. The commit makes it possible to use multi-queue in the CAN subsystem in the same way it is used in the Ethernet subsystem by adding an alloc_candev_mqs() call and accompanying macros. With this support a CAN device can use multi-queue qdisc (e.g. mqprio) to avoid the aforementioned priority inversion. The exisiting functionality of alloc_candev() is the same as before. CAN devices need to have prioritized multiple hardware queues or are able to abort waiting for arbitration to make sensible use of multi-queues. Signed-off-by: Zhu Yi <yi.zhu5@cn.bosch.com> Signed-off-by: Mark Jonas <mark.jonas@de.bosch.com> Reviewed-by: Heiko Schocher <hs@denx.de> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2018-07-27can: uapi: can.h: Fix can error class mask dir pathDan Murphy
The CAN error masks header file is in the include/uapi directory. Fix the path in the header to the correct location. Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2018-07-26include/linux/eventfd.h: include linux/errno.hArnd Bergmann
The new gasket staging driver ran into a randconfig build failure when CONFIG_EVENTFD is disabled: In file included from drivers/staging/gasket/gasket_interrupt.h:11, from drivers/staging/gasket/gasket_interrupt.c:4: include/linux/eventfd.h: In function 'eventfd_ctx_fdget': include/linux/eventfd.h:51:9: error: implicit declaration of function 'ERR_PTR' [-Werror=implicit-function-declaration] I can't see anything wrong with including eventfd.h before err.h, so the easiest fix is to make it possible to do this by including the file where it is needed. Link: http://lkml.kernel.org/r/20180724110737.3985088-1-arnd@arndb.de Fixes: 9a69f5087ccc ("drivers/staging: Gasket driver framework + Apex driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Eric Biggers <ebiggers@google.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-07-26mm: fix vma_is_anonymous() false-positivesKirill A. Shutemov
vma_is_anonymous() relies on ->vm_ops being NULL to detect anonymous VMA. This is unreliable as ->mmap may not set ->vm_ops. False-positive vma_is_anonymous() may lead to crashes: next ffff8801ce5e7040 prev ffff8801d20eca50 mm ffff88019c1e13c0 prot 27 anon_vma ffff88019680cdd8 vm_ops 0000000000000000 pgoff 0 file ffff8801b2ec2d00 private_data 0000000000000000 flags: 0xff(read|write|exec|shared|mayread|maywrite|mayexec|mayshare) ------------[ cut here ]------------ kernel BUG at mm/memory.c:1422! invalid opcode: 0000 [#1] SMP KASAN CPU: 0 PID: 18486 Comm: syz-executor3 Not tainted 4.18.0-rc3+ #136 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:zap_pmd_range mm/memory.c:1421 [inline] RIP: 0010:zap_pud_range mm/memory.c:1466 [inline] RIP: 0010:zap_p4d_range mm/memory.c:1487 [inline] RIP: 0010:unmap_page_range+0x1c18/0x2220 mm/memory.c:1508 Call Trace: unmap_single_vma+0x1a0/0x310 mm/memory.c:1553 zap_page_range_single+0x3cc/0x580 mm/memory.c:1644 unmap_mapping_range_vma mm/memory.c:2792 [inline] unmap_mapping_range_tree mm/memory.c:2813 [inline] unmap_mapping_pages+0x3a7/0x5b0 mm/memory.c:2845 unmap_mapping_range+0x48/0x60 mm/memory.c:2880 truncate_pagecache+0x54/0x90 mm/truncate.c:800 truncate_setsize+0x70/0xb0 mm/truncate.c:826 simple_setattr+0xe9/0x110 fs/libfs.c:409 notify_change+0xf13/0x10f0 fs/attr.c:335 do_truncate+0x1ac/0x2b0 fs/open.c:63 do_sys_ftruncate+0x492/0x560 fs/open.c:205 __do_sys_ftruncate fs/open.c:215 [inline] __se_sys_ftruncate fs/open.c:213 [inline] __x64_sys_ftruncate+0x59/0x80 fs/open.c:213 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Reproducer: #include <stdio.h> #include <stddef.h> #include <stdint.h> #include <stdlib.h> #include <string.h> #include <sys/types.h> #include <sys/stat.h> #include <sys/ioctl.h> #include <sys/mman.h> #include <unistd.h> #include <fcntl.h> #define KCOV_INIT_TRACE _IOR('c', 1, unsigned long) #define KCOV_ENABLE _IO('c', 100) #define KCOV_DISABLE _IO('c', 101) #define COVER_SIZE (1024<<10) #define KCOV_TRACE_PC 0 #define KCOV_TRACE_CMP 1 int main(int argc, char **argv) { int fd; unsigned long *cover; system("mount -t debugfs none /sys/kernel/debug"); fd = open("/sys/kernel/debug/kcov", O_RDWR); ioctl(fd, KCOV_INIT_TRACE, COVER_SIZE); cover = mmap(NULL, COVER_SIZE * sizeof(unsigned long), PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0); munmap(cover, COVER_SIZE * sizeof(unsigned long)); cover = mmap(NULL, COVER_SIZE * sizeof(unsigned long), PROT_READ | PROT_WRITE, MAP_PRIVATE, fd, 0); memset(cover, 0, COVER_SIZE * sizeof(unsigned long)); ftruncate(fd, 3UL << 20); return 0; } This can be fixed by assigning anonymous VMAs own vm_ops and not relying on it being NULL. If ->mmap() failed to set ->vm_ops, mmap_region() will set it to dummy_vm_ops. This way we will have non-NULL ->vm_ops for all VMAs. Link: http://lkml.kernel.org/r/20180724121139.62570-4-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: syzbot+3f84280d52be9b7083cc@syzkaller.appspotmail.com Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-07-26mm: introduce vma_init()Kirill A. Shutemov
Not all VMAs allocated with vm_area_alloc(). Some of them allocated on stack or in data segment. The new helper can be use to initialize VMA properly regardless where it was allocated. Link: http://lkml.kernel.org/r/20180724121139.62570-2-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-07-26delayacct: fix crash in delayacct_blkio_end() after delayacct init failureTejun Heo
While forking, if delayacct init fails due to memory shortage, it continues expecting all delayacct users to check task->delays pointer against NULL before dereferencing it, which all of them used to do. Commit c96f5471ce7d ("delayacct: Account blkio completion on the correct task"), while updating delayacct_blkio_end() to take the target task instead of always using %current, made the function test NULL on %current->delays and then continue to operated on @p->delays. If %current succeeded init while @p didn't, it leads to the following crash. BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 IP: __delayacct_blkio_end+0xc/0x40 PGD 8000001fd07e1067 P4D 8000001fd07e1067 PUD 1fcffbb067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 4 PID: 25774 Comm: QIOThread0 Not tainted 4.16.0-9_fbk1_rc2_1180_g6b593215b4d7 #9 RIP: 0010:__delayacct_blkio_end+0xc/0x40 Call Trace: try_to_wake_up+0x2c0/0x600 autoremove_wake_function+0xe/0x30 __wake_up_common+0x74/0x120 wake_up_page_bit+0x9c/0xe0 mpage_end_io+0x27/0x70 blk_update_request+0x78/0x2c0 scsi_end_request+0x2c/0x1e0 scsi_io_completion+0x20b/0x5f0 blk_mq_complete_request+0xa2/0x100 ata_scsi_qc_complete+0x79/0x400 ata_qc_complete_multiple+0x86/0xd0 ahci_handle_port_interrupt+0xc9/0x5c0 ahci_handle_port_intr+0x54/0xb0 ahci_single_level_irq_intr+0x3b/0x60 __handle_irq_event_percpu+0x43/0x190 handle_irq_event_percpu+0x20/0x50 handle_irq_event+0x2a/0x50 handle_edge_irq+0x80/0x1c0 handle_irq+0xaf/0x120 do_IRQ+0x41/0xc0 common_interrupt+0xf/0xf Fix it by updating delayacct_blkio_end() check @p->delays instead. Link: http://lkml.kernel.org/r/20180724175542.GP1934745@devbig577.frc2.facebook.com Fixes: c96f5471ce7d ("delayacct: Account blkio completion on the correct task") Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Dave Jones <dsj@fb.com> Debugged-by: Dave Jones <dsj@fb.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Josh Snyder <joshs@netflix.com> Cc: <stable@vger.kernel.org> [4.15+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-07-25net/smc: provide fallback reason codeKarsten Graul
Remember the fallback reason code and the peer diagnosis code for smc sockets, and provide them in smc_diag.c to the netlink interface. And add more detailed reason codes. Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-25net: phy: add helper phy_polling_modeHeiner Kallweit
Add a helper for checking whether polling is used to detect PHY status changes. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-25ring_buffer: tracing: Inherit the tracing setting to next ring bufferMasami Hiramatsu
Maintain the tracing on/off setting of the ring_buffer when switching to the trace buffer snapshot. Taking a snapshot is done by swapping the backup ring buffer (max_tr_buffer). But since the tracing on/off setting is defined by the ring buffer, when swapping it, the tracing on/off setting can also be changed. This causes a strange result like below: /sys/kernel/debug/tracing # cat tracing_on 1 /sys/kernel/debug/tracing # echo 0 > tracing_on /sys/kernel/debug/tracing # cat tracing_on 0 /sys/kernel/debug/tracing # echo 1 > snapshot /sys/kernel/debug/tracing # cat tracing_on 1 /sys/kernel/debug/tracing # echo 1 > snapshot /sys/kernel/debug/tracing # cat tracing_on 0 We don't touch tracing_on, but snapshot changes tracing_on setting each time. This is an anomaly, because user doesn't know that each "ring_buffer" stores its own tracing-enable state and the snapshot is done by swapping ring buffers. Link: http://lkml.kernel.org/r/153149929558.11274.11730609978254724394.stgit@devbox Cc: Ingo Molnar <mingo@redhat.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: Hiraku Toyooka <hiraku.toyooka@cybertrust.co.jp> Cc: stable@vger.kernel.org Fixes: debdd57f5145 ("tracing: Make a snapshot feature available from userspace") Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> [ Updated commit log and comment in the code ] Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-07-25perf/x86/intel: Fix unwind errors from PEBS entries (mk-II)Peter Zijlstra
Vince reported the perf_fuzzer giving various unwinder warnings and Josh reported: > Deja vu. Most of these are related to perf PEBS, similar to the > following issue: > > b8000586c90b ("perf/x86/intel: Cure bogus unwind from PEBS entries") > > This is basically the ORC version of that. setup_pebs_sample_data() is > assembling a franken-pt_regs which ORC isn't happy about. RIP is > inconsistent with some of the other registers (like RSP and RBP). And where the previous unwinder only needed BP,SP ORC also requires IP. But we cannot spoof IP because then the sample will get displaced, entirely negating the point of PEBS. So cure the whole thing differently by doing the unwind early; this does however require a means to communicate we did the unwind early. We (ab)use an unused sample_type bit for this, which we set on events that fill out the data->callchain before the normal perf_prepare_sample(). Debugged-by: Josh Poimboeuf <jpoimboe@redhat.com> Reported-by: Vince Weaver <vincent.weaver@maine.edu> Tested-by: Josh Poimboeuf <jpoimboe@redhat.com> Tested-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-07-25locking/rtmutex: Allow specifying a subclass for nested lockingPeter Rosin
Needed for annotating rt_mutex locks. Tested-by: John Sperbeck <jsperbeck@google.com> Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Deepa Dinamani <deepadinamani@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Chang <dpf@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will.deacon@arm.com> Cc: Wolfram Sang <wsa@the-dreams.de> Link: http://lkml.kernel.org/r/20180720083914.1950-2-peda@axentia.se Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-07-24Merge ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2018-07-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Handle stations tied to AP_VLANs properly during mac80211 hw reconfig. From Manikanta Pubbisetty. 2) Fix jump stack depth validation in nf_tables, from Taehee Yoo. 3) Fix quota handling in aRFS flow expiration of mlx5 driver, from Eran Ben Elisha. 4) Exit path handling fix in powerpc64 BPF JIT, from Daniel Borkmann. 5) Use ptr_ring_consume_bh() in page pool code, from Tariq Toukan. 6) Fix cached netdev name leak in nf_tables, from Florian Westphal. 7) Fix memory leaks on chain rename, also from Florian Westphal. 8) Several fixes to DCTCP congestion control ACK handling, from Yuchunk Cheng. 9) Missing rcu_read_unlock() in CAIF protocol code, from Yue Haibing. 10) Fix link local address handling with VRF, from David Ahern. 11) Don't clobber 'err' on a successful call to __skb_linearize() in skb_segment(). From Eric Dumazet. 12) Fix vxlan fdb notification races, from Roopa Prabhu. 13) Hash UDP fragments consistently, from Paolo Abeni. 14) If TCP receives lots of out of order tiny packets, we do really silly stuff. Make the out-of-order queue ending more robust to this kind of behavior, from Eric Dumazet. 15) Don't leak netlink dump state in nf_tables, from Florian Westphal. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (76 commits) net: axienet: Fix double deregister of mdio qmi_wwan: fix interface number for DW5821e production firmware ip: in cmsg IP(V6)_ORIGDSTADDR call pskb_may_pull bnx2x: Fix invalid memory access in rss hash config path. net/mlx4_core: Save the qpn from the input modifier in RST2INIT wrapper r8169: restore previous behavior to accept BIOS WoL settings cfg80211: never ignore user regulatory hint sock: fix sg page frag coalescing in sk_alloc_sg netfilter: nf_tables: move dumper state allocation into ->start tcp: add tcp_ooo_try_coalesce() helper tcp: call tcp_drop() from tcp_data_queue_ofo() tcp: detect malicious patterns in tcp_collapse_ofo_queue() tcp: avoid collapses in tcp_prune_queue() if possible tcp: free batches of packets in tcp_prune_ofo_queue() ip: hash fragments consistently ipv6: use fib6_info_hold_safe() when necessary can: xilinx_can: fix power management handling can: xilinx_can: fix incorrect clear of non-processed interrupts can: xilinx_can: fix RX overflow interrupt not being enabled can: xilinx_can: keep only 1-2 frames in TX FIFO to fix TX accounting ...
2018-07-24net/sched: add skbprio schedulerNishanth Devarajan
Skbprio (SKB Priority Queue) is a queueing discipline that prioritizes packets according to their skb->priority field. Under congestion, already-enqueued lower priority packets will be dropped to make space available for higher priority packets. Skbprio was conceived as a solution for denial-of-service defenses that need to route packets with different priorities as a means to overcome DoS attacks. v5 *Do not reference qdisc_dev(sch)->tx_queue_len for setting limit. Instead set default sch->limit to 64. v4 *Drop Documentation/networking/sch_skbprio.txt doc file to move it to tc man page for Skbprio, in iproute2. v3 *Drop max_limit parameter in struct skbprio_sched_data and instead use sch->limit. *Reference qdisc_dev(sch)->tx_queue_len only once, during initialisation for qdisc (previously being referenced every time qdisc changes). *Move qdisc's detailed description from in-code to Documentation/networking. *When qdisc is saturated, enqueue incoming packet first before dequeueing lowest priority packet in queue - improves usage of call stack registers. *Introduce and use overlimit stat to keep track of number of dropped packets. v2 *Use skb->priority field rather than DS field. Rename queueing discipline as SKB Priority Queue (previously Gatekeeper Priority Queue). *Queueing discipline is made classful to expose Skbprio's internal priority queues. Signed-off-by: Nishanth Devarajan <ndev2021@gmail.com> Reviewed-by: Sachin Paryani <sachin.paryani@gmail.com> Reviewed-by: Cody Doucette <doucette@bu.edu> Reviewed-by: Michel Machado <michel@digirati.com.br> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-24net: phy: add GBit master / slave error detectionHeiner Kallweit
Certain PHY's have issues when operating in GBit slave mode and can be forced to master mode. Examples are RTL8211C, also the Micrel PHY driver has a DT setting to force master mode. If two such chips are link partners the autonegotiation will fail. Standard defines a self-clearing on read, latched-high bit to indicate this error. Check this bit to inform the user. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-24blk-mq: export setting request completion stateKeith Busch
This is preparing for drivers that want to directly alter the state of their requests. No functional change here. Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <keith.busch@intel.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-07-24netlink: do not store start function in netlink_cbFlorian Westphal
->start() is called once when dump is being initialized, there is no need to store it in netlink_cb. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Make sure we don't go over the maximum jump stack boundary, from Taehee Yoo. 2) Missing rcu_barrier() in hash and rbtree sets, also from Taehee. 3) Missing check to nul-node in rbtree timeout routine, from Taehee. 4) Use dev->name from flowtable to fix a memleak, from Florian. 5) Oneliner to free flowtable object on removal, from Florian. 6) Memleak in chain rename transaction, again from Florian. 7) Don't allow two chains to use the same name in the same transaction, from Florian. 8) handle DCCP SYNC/SYNCACK as invalid, this triggers an uninitialized timer in conntrack reported by syzbot, from Florian. 9) Fix leak in case netlink_dump_start() fails, from Florian. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-24Merge tag 'mac80211-for-davem-2018-07-24' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Only a few fixes: * always keep regulatory user hint * add missing break statement in station flags parsing * fix non-linear SKBs in port-control-over-nl80211 * reconfigure VLAN stations during HW restart ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-23Merge tag 'wireless-drivers-next-for-davem-2018-07-23' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for 4.19 The first set of patches for 4.19. Only smaller features and bug fixes, not really anything major. Also included are changes to include/linux/bitfield.h, we agreed with Johannes that it makes sense to apply them via wireless-drivers-next. Major changes: ath10k * support channel 173 * fix spectral scan for QCA9984 and QCA9888 chipsets ath6kl * add support for Dell Wireless 1537 ti wlcore * add support for runtime PM * enable runtime PM autosuspend support qtnfmac * support changing MAC address * enable source MAC address randomization support libertas * fix suspend and resume for SDIO cards mt76 * add software DFS radar pattern detector for mt76x2 based devices ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-23rds: Extend RDS API for IPv6 supportKa-Cheong Poon
There are many data structures (RDS socket options) used by RDS apps which use a 32 bit integer to store IP address. To support IPv6, struct in6_addr needs to be used. To ensure backward compatibility, a new data structure is introduced for each of those data structures which use a 32 bit integer to represent an IP address. And new socket options are introduced to use those new structures. This means that existing apps should work without a problem with the new RDS module. For apps which want to use IPv6, those new data structures and socket options can be used. IPv4 mapped address is used to represent IPv4 address in the new data structures. v4: Revert changes to SO_RDS_TRANSPORT Signed-off-by: Ka-Cheong Poon <ka-cheong.poon@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-23net: sched: cls_flower: propagate chain teplate creation and destruction to ↵Jiri Pirko
drivers Introduce a couple of flower offload commands in order to propagate template creation/destruction events down to device drivers. Drivers may use this information to prepare HW in an optimal way for future filter insertions. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-23net: sched: introduce chain templatesJiri Pirko
Allow user to set a template for newly created chains. Template lock down the chain for particular classifier type/options combinations. The classifier needs to support templates, otherwise kernel would reply with error. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-23net: sched: introduce chain object to uapiJiri Pirko
Allow user to create, destroy, get and dump chain objects. Do that by extending rtnl commands by the chain-specific ones. User will now be able to explicitly create or destroy chains (so far this was done only automatically according the filter/act needs and refcounting). Also, the user will receive notification about any chain creation or destuction. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-23net: sched: Avoid implicit chain 0 creationJiri Pirko
Currently, chain 0 is implicitly created during block creation. However that does not align with chain object exposure, creation and destruction api introduced later on. So make the chain 0 behave the same way as any other chain and only create it when it is needed. Since chain 0 is somehow special as the qdiscs need to hold pointer to the first chain tp, this requires to move the chain head change callback infra to the block structure. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-23net/mlx5: FW tracer, events handlingFeras Daoud
The tracer has one event, event 0x26, with two subtypes: - Subtype 0: Ownership change - Subtype 1: Traces available An ownership change occurs in the following cases: 1- Owner releases his ownership, in this case, an event will be sent to inform others to reattempt acquire ownership. 2- Ownership was taken by a higher priority tool, in this case the owner should understand that it lost ownership, and go through tear down flow. The second subtype indicates that there are traces in the trace buffer, in this case, the driver polls the tracer buffer for new traces, parse them and prepares the messages for printing. The HW starts tracing from the first address in the tracer buffer. Driver receives an event notifying that new trace block exists. HW posts a timestamp event at the last 8B of every 256B block. Comparing the timestamp to the last handled timestamp would indicate that this is a new trace block. Once the new timestamp is detected, the entire block is considered valid. Block validation and parsing, should be done after copying the current block to a different location, in order to avoid block overwritten during processing. Signed-off-by: Feras Daoud <ferasda@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-07-23net/mlx5: FW tracer, implement tracer logicFeras Daoud
Implement FW tracer logic and registers access, initialization and cleanup flows. Initializing the tracer will be part of load one flow, as multiple PFs will try to acquire ownership but only one will succeed and will be the tracer owner. Signed-off-by: Feras Daoud <ferasda@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-07-23Merge branch 'mlx5-next' of ↵Saeed Mahameed
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux mlx5 core infrastructure updates and fixes. From Eran: - Add MPEGC (Management PCIe General Configuration) registers and btis - Fix tristate and description for MLX5 module rom Feras: - Add hardware structures for the firmware tracer From Jainbo: - Core support for double vlan push/pop steering action From Max: - Add XRQ commands definitions From Noa: - Add missing SET_DRIVER_VERSION command translation From Roi: - Use ERR_CAST() instead of coding it From Tariq: - Better return types for CQE API Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2018-07-23ipv6: use fib6_info_hold_safe() when necessaryWei Wang
In the code path where only rcu read lock is held, e.g. in the route lookup code path, it is not safe to directly call fib6_info_hold() because the fib6_info may already have been deleted but still exists in the rcu grace period. Holding reference to it could cause double free and crash the kernel. This patch adds a new function fib6_info_hold_safe() and replace fib6_info_hold() in all necessary places. Syzbot reported 3 crash traces because of this. One of them is: 8021q: adding VLAN 0 to HW filter on device team0 IPv6: ADDRCONF(NETDEV_CHANGE): team0: link becomes ready dst_release: dst:(____ptrval____) refcnt:-1 dst_release: dst:(____ptrval____) refcnt:-2 WARNING: CPU: 1 PID: 4845 at include/net/dst.h:239 dst_hold include/net/dst.h:239 [inline] WARNING: CPU: 1 PID: 4845 at include/net/dst.h:239 ip6_setup_cork+0xd66/0x1830 net/ipv6/ip6_output.c:1204 dst_release: dst:(____ptrval____) refcnt:-1 Kernel panic - not syncing: panic_on_warn set ... CPU: 1 PID: 4845 Comm: syz-executor493 Not tainted 4.18.0-rc3+ #10 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x2b4 lib/dump_stack.c:113 panic+0x238/0x4e7 kernel/panic.c:184 dst_release: dst:(____ptrval____) refcnt:-2 dst_release: dst:(____ptrval____) refcnt:-3 __warn.cold.8+0x163/0x1ba kernel/panic.c:536 dst_release: dst:(____ptrval____) refcnt:-4 report_bug+0x252/0x2d0 lib/bug.c:186 fixup_bug arch/x86/kernel/traps.c:178 [inline] do_error_trap+0x1fc/0x4d0 arch/x86/kernel/traps.c:296 dst_release: dst:(____ptrval____) refcnt:-5 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:316 invalid_op+0x14/0x20 arch/x86/entry/entry_64.S:992 RIP: 0010:dst_hold include/net/dst.h:239 [inline] RIP: 0010:ip6_setup_cork+0xd66/0x1830 net/ipv6/ip6_output.c:1204 Code: c1 ed 03 89 9d 18 ff ff ff 48 b8 00 00 00 00 00 fc ff df 41 c6 44 05 00 f8 e9 2d 01 00 00 4c 8b a5 c8 fe ff ff e8 1a f6 e6 fa <0f> 0b e9 6a fc ff ff e8 0e f6 e6 fa 48 8b 85 d0 fe ff ff 48 8d 78 RSP: 0018:ffff8801a8fcf178 EFLAGS: 00010293 RAX: ffff8801a8eba5c0 RBX: 0000000000000000 RCX: ffffffff869511e6 RDX: 0000000000000000 RSI: ffffffff869515b6 RDI: 0000000000000005 RBP: ffff8801a8fcf2c8 R08: ffff8801a8eba5c0 R09: ffffed0035ac8338 R10: ffffed0035ac8338 R11: ffff8801ad6419c3 R12: ffff8801a8fcf720 R13: ffff8801a8fcf6a0 R14: ffff8801ad6419c0 R15: ffff8801ad641980 ip6_make_skb+0x2c8/0x600 net/ipv6/ip6_output.c:1768 udpv6_sendmsg+0x2c90/0x35f0 net/ipv6/udp.c:1376 inet_sendmsg+0x1a1/0x690 net/ipv4/af_inet.c:798 sock_sendmsg_nosec net/socket.c:641 [inline] sock_sendmsg+0xd5/0x120 net/socket.c:651 ___sys_sendmsg+0x51d/0x930 net/socket.c:2125 __sys_sendmmsg+0x240/0x6f0 net/socket.c:2220 __do_sys_sendmmsg net/socket.c:2249 [inline] __se_sys_sendmmsg net/socket.c:2246 [inline] __x64_sys_sendmmsg+0x9d/0x100 net/socket.c:2246 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x446ba9 Code: e8 cc bb 02 00 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 08 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fb39a469da8 EFLAGS: 00000246 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 00000000006dcc54 RCX: 0000000000446ba9 RDX: 00000000000000b8 RSI: 0000000020001b00 RDI: 0000000000000003 RBP: 00000000006dcc50 R08: 00007fb39a46a700 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 45c828efc7a64843 R13: e6eeb815b9d8a477 R14: 5068caf6f713c6fc R15: 0000000000000001 Dumping ftrace buffer: (ftrace buffer empty) Kernel Offset: disabled Rebooting in 86400 seconds.. Fixes: 93531c674315 ("net/ipv6: separate handling of FIB entries from dst based routes") Reported-by: syzbot+902e2a1bcd4f7808cef5@syzkaller.appspotmail.com Reported-by: syzbot+8ae62d67f647abeeceb9@syzkaller.appspotmail.com Reported-by: syzbot+3f08feb14086930677d0@syzkaller.appspotmail.com Signed-off-by: Wei Wang <weiwan@google.com> Acked-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-23net/smc: provide smc mode in smc_diag.cKarsten Graul
Rename field diag_fallback into diag_mode and set the smc mode of a connection explicitly. Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-23net: bridge: add support for backup portNikolay Aleksandrov
This patch adds a new port attribute - IFLA_BRPORT_BACKUP_PORT, which allows to set a backup port to be used for known unicast traffic if the port has gone carrier down. The backup pointer is rcu protected and set only under RTNL, a counter is maintained so when deleting a port we know how many other ports reference it as a backup and we remove it from all. Also the pointer is in the first cache line which is hot at the time of the check and thus in the common case we only add one more test. The backup port will be used only for the non-flooding case since it's a part of the bridge and the flooded packets will be forwarded to it anyway. To remove the forwarding just send a 0/non-existing backup port. This is used to avoid numerous scalability problems when using MLAG most notably if we have thousands of fdbs one would need to change all of them on port carrier going down which takes too long and causes a storm of fdb notifications (and again when the port comes back up). In a Multi-chassis Link Aggregation setup usually hosts are connected to two different switches which act as a single logical switch. Those switches usually have a control and backup link between them called peerlink which might be used for communication in case a host loses connectivity to one of them. We need a fast way to failover in case a host port goes down and currently none of the solutions (like bond) cannot fulfill the requirements because the participating ports are actually the "master" devices and must have the same peerlink as their backup interface and at the same time all of them must participate in the bridge device. As Roopa noted it's normal practice in routing called fast re-route where a precalculated backup path is used when the main one is down. Another use case of this is with EVPN, having a single vxlan device which is backup of every port. Due to the nature of master devices it's not currently possible to use one device as a backup for many and still have all of them participate in the bridge (which is master itself). More detailed information about MLAG is available at the link below. https://docs.cumulusnetworks.com/display/DOCS/Multi-Chassis+Link+Aggregation+-+MLAG Further explanation and a diagram by Roopa: Two switches acting in a MLAG pair are connected by the peerlink interface which is a bridge port. the config on one of the switches looks like the below. The other switch also has a similar config. eth0 is connected to one port on the server. And the server is connected to both switches. br0 -- team0---eth0 | -- switch-peerlink Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-22Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds
Pull vfs fixes from Al Viro: "Fix several places that screw up cleanups after failures halfway through opening a file (one open-coding filp_clone_open() and getting it wrong, two misusing alloc_file()). That part is -stable fodder from the 'work.open' branch. And Christoph's regression fix for uapi breakage in aio series; include/uapi/linux/aio_abi.h shouldn't be pulling in the kernel definition of sigset_t, the reason for doing so in the first place had been bogus - there's no need to expose struct __aio_sigset in aio_abi.h at all" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: aio: don't expose __aio_sigset in uapi ocxlflash_getfile(): fix double-iput() on alloc_file() failures cxl_getfile(): fix double-iput() on alloc_file() failures drm_mode_create_lease_ioctl(): fix open-coded filp_clone_open()
2018-07-22alpha: fix osf_wait4() breakageAl Viro
kernel_wait4() expects a userland address for status - it's only rusage that goes as a kernel one (and needs a copyout afterwards) [ Also, fix the prototype of kernel_wait4() to have that __user annotation - Linus ] Fixes: 92ebce5ac55d ("osf_wait4: switch to kernel_wait4()") Cc: stable@kernel.org # v4.13+ Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-07-22nfp: bring back support for offloading shared blocksJakub Kicinski
Now that we have offload replay infrastructure added by commit 326367427cc0 ("net: sched: call reoffload op on block callback reg") and flows are guaranteed to be removed correctly, we can revert commit 951a8ee6def3 ("nfp: reject binding to shared blocks"). Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-21net/ipv6: Fix linklocal to global address with VRFDavid Ahern
Example setup: host: ip -6 addr add dev eth1 2001:db8:104::4 where eth1 is enslaved to a VRF switch: ip -6 ro add 2001:db8:104::4/128 dev br1 where br1 only has an LLA ping6 2001:db8:104::4 ssh 2001:db8:104::4 (NOTE: UDP works fine if the PKTINFO has the address set to the global address and ifindex is set to the index of eth1 with a destination an LLA). For ICMP, icmp6_iif needs to be updated to check if skb->dev is an L3 master. If it is then return the ifindex from rt6i_idev similar to what is done for loopback. For TCP, restore the original tcp_v6_iif definition which is needed in most places and add a new tcp_v6_iif_l3_slave that considers the l3_slave variability. This latter check is only needed for socket lookups. Fixes: 9ff74384600a ("net: vrf: Handle ipv6 multicast and link-local addresses") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-21bpfilter: Fix mismatch in function argument typesYueHaibing
Fix following warning: net/ipv4/bpfilter/sockopt.c:28:5: error: symbol 'bpfilter_ip_set_sockopt' redeclared with different type net/ipv4/bpfilter/sockopt.c:34:5: error: symbol 'bpfilter_ip_get_sockopt' redeclared with different type Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-21mm: make vm_area_alloc() initialize core fieldsLinus Torvalds
Like vm_area_dup(), it initializes the anon_vma_chain head, and the basic mm pointer. The rest of the fields end up being different for different users, although the plan is to also initialize the 'vm_ops' field to a dummy entry. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-07-21mm: use helper functions for allocating and freeing vm_area structsLinus Torvalds
The vm_area_struct is one of the most fundamental memory management objects, but the management of it is entirely open-coded evertwhere, ranging from allocation and freeing (using kmem_cache_[z]alloc and kmem_cache_free) to initializing all the fields. We want to unify this in order to end up having some unified initialization of the vmas, and the first step to this is to at least have basic allocation functions. Right now those functions are literally just wrappers around the kmem_cache_*() calls. This is a purely mechanical conversion: # new vma: kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL) -> vm_area_alloc() # copy old vma kmem_cache_alloc(vm_area_cachep, GFP_KERNEL) -> vm_area_dup(old) # free vma kmem_cache_free(vm_area_cachep, vma) -> vm_area_free(vma) to the point where the old vma passed in to the vm_area_dup() function isn't even used yet (because I've left all the old manual initialization alone). Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-07-21Merge tag 'mlx5-fixes-2018-07-18' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2018-07-18 The following series provides fixes to mlx5 core and net device driver. Please pull and let me know if there's any problem. For -stable v4.7 net/mlx5e: Don't allow aRFS for encapsulated packets net/mlx5e: Fix quota counting in aRFS expire flow For -stable v4.15 net/mlx5e: Only allow offloading decap egress (egdev) flows net/mlx5e: Refine ets validation function net/mlx5: Adjust clock overflow work period For -stable v4.17 net/mlx5: E-Switch, UBSAN fix undefined behavior in mlx5_eswitch_mode ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf-next 2018-07-20 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Add sharing of BPF objects within one ASIC: this allows for reuse of the same program on multiple ports of a device, and therefore gains better code store utilization. On top of that, this now also enables sharing of maps between programs attached to different ports of a device, from Jakub. 2) Cleanup in libbpf and bpftool's Makefile to reduce unneeded feature detections and unused variable exports, also from Jakub. 3) First batch of RCU annotation fixes in prog array handling, i.e. there are several __rcu markers which are not correct as well as some of the RCU handling, from Roman. 4) Two fixes in BPF sample files related to checking of the prog_cnt upper limit from sample loader, from Dan. 5) Minor cleanup in sockmap to remove a set but not used variable, from Colin. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf 2018-07-20 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix in BPF Makefile to detect llvm-objcopy in a more robust way which is needed for pahole's BTF converter and minor UAPI tweaks in BTF_INT_BITS() to shrink the mask before eventual UAPI freeze, from Martin. 2) Fix a segfault in bpftool when prog pin id has no further arguments such as id value or file specified, from Taeung. 3) Fix powerpc JIT handling of XADD which has jumps to exit path that would potentially bypass verifier expectations e.g. with subprog calls. Also add a test case to make sure XADD is not mangling src/dst register, from Daniel. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-20net: create reusable function for getting ownership info of sysfs inodesTyler Hicks
Make net_ns_get_ownership() reusable by networking code outside of core. This is useful, for example, to allow bridge related sysfs files to be owned by container root. Add a function comment since this is a potentially dangerous function to use given the way that kobject_get_ownership() works by initializing uid and gid before calling .get_ownership(). Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-20driver core: set up ownership of class devices in sysfsDmitry Torokhov
Plumb in get_ownership() callback for devices belonging to a class so that they can be created with uid/gid different from global root. This will allow network devices in a container to belong to container's root and not global root. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-20sysfs, kobject: allow creating kobject belonging to arbitrary usersDmitry Torokhov
Normally kobjects and their sysfs representation belong to global root, however it is not necessarily the case for objects in separate namespaces. For example, objects in separate network namespace logically belong to the container's root and not global root. This change lays groundwork for allowing network namespace objects ownership to be transferred to container's root user by defining get_ownership() callback in ktype structure and using it in sysfs code to retrieve desired uid/gid when creating sysfs objects for given kobject. Co-Developed-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-20kernfs: allow creating kernfs objects with arbitrary uid/gidDmitry Torokhov
This change allows creating kernfs files and directories with arbitrary uid/gid instead of always using GLOBAL_ROOT_UID/GID by extending kernfs_create_dir_ns() and kernfs_create_file_ns() with uid/gid arguments. The "simple" kernfs_create_file() and kernfs_create_dir() are left alone and always create objects belonging to the global root. When creating symlinks ownership (uid/gid) is taken from the target kernfs object. Co-Developed-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next The following patchset contains Netfilter/IPVS updates for your net-next tree: 1) No need to set ttl from reject action for the bridge family, from Taehee Yoo. 2) Use a fixed timeout for flow that are passed up from the flowtable to conntrack, from Florian Westphal. 3) More preparation patches for tproxy support for nf_tables, from Mate Eckl. 4) Remove unnecessary indirection in core IPv6 checksum function, from Florian Westphal. 5) Use nf_ct_get_tuplepr() from openvswitch, instead of opencoding it. From Florian Westphal. 6) socket match now selects socket infrastructure, instead of depending on it. From Mate Eckl. 7) Patch series to simplify conntrack tuple building/parsing from packet path and ctnetlink, from Florian Westphal. 8) Fetch timeout policy from protocol helpers, instead of doing it from core, from Florian Westphal. 9) Merge IPv4 and IPv6 protocol trackers into conntrack core, from Florian Westphal. 10) Depend on CONFIG_NF_TABLES_IPV6 and CONFIG_IP6_NF_IPTABLES respectively, instead of IPV6. Patch from Mate Eckl. 11) Add specific function for garbage collection in conncount, from Yi-Hung Wei. 12) Catch number of elements in the connlimit list, from Yi-Hung Wei. 13) Move locking to nf_conncount, from Yi-Hung Wei. 14) Series of patches to add lockless tree traversal in nf_conncount, from Yi-Hung Wei. 15) Resolve clash in matching conntracks when race happens, from Martynas Pumputis. 16) If connection entry times out, remove template entry from the ip_vs_conn_tab table to improve behaviour under flood, from Julian Anastasov. 17) Remove useless parameter from nf_ct_helper_ext_add(), from Gao feng. 18) Call abort from 2-phase commit protocol before requesting modules, make sure this is done under the mutex, from Florian Westphal. 19) Grab module reference when starting transaction, also from Florian. 20) Dynamically allocate expression info array for pre-parsing, from Florian. 21) Add per netns mutex for nf_tables, from Florian Westphal. 22) A couple of patches to simplify and refactor nf_osf code to prepare for nft_osf support. 23) Break evaluation on missing socket, from Mate Eckl. 24) Allow to match socket mark from nft_socket, from Mate Eckl. 25) Remove dependency on nf_defrag_ipv6, now that IPv6 tracker is built-in into nf_conntrack. From Florian Westphal. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-20Merge ra.kernel.org:/pub/scm/linux/kernel/git/torvalds/linuxDavid S. Miller
All conflicts were trivial overlapping changes, so reasonably easy to resolve. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-20tcp: do not delay ACK in DCTCP upon CE status changeYuchung Cheng
Per DCTCP RFC8257 (Section 3.2) the ACK reflecting the CE status change has to be sent immediately so the sender can respond quickly: """ When receiving packets, the CE codepoint MUST be processed as follows: 1. If the CE codepoint is set and DCTCP.CE is false, set DCTCP.CE to true and send an immediate ACK. 2. If the CE codepoint is not set and DCTCP.CE is true, set DCTCP.CE to false and send an immediate ACK. """ Previously DCTCP implementation may continue to delay the ACK. This patch fixes that to implement the RFC by forcing an immediate ACK. Tested with this packetdrill script provided by Larry Brakmo 0.000 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 0.000 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0 0.000 setsockopt(3, SOL_TCP, TCP_CONGESTION, "dctcp", 5) = 0 0.000 bind(3, ..., ...) = 0 0.000 listen(3, 1) = 0 0.100 < [ect0] SEW 0:0(0) win 32792 <mss 1000,sackOK,nop,nop,nop,wscale 7> 0.100 > SE. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK,nop,wscale 8> 0.110 < [ect0] . 1:1(0) ack 1 win 257 0.200 accept(3, ..., ...) = 4 +0 setsockopt(4, SOL_SOCKET, SO_DEBUG, [1], 4) = 0 0.200 < [ect0] . 1:1001(1000) ack 1 win 257 0.200 > [ect01] . 1:1(0) ack 1001 0.200 write(4, ..., 1) = 1 0.200 > [ect01] P. 1:2(1) ack 1001 0.200 < [ect0] . 1001:2001(1000) ack 2 win 257 +0.005 < [ce] . 2001:3001(1000) ack 2 win 257 +0.000 > [ect01] . 2:2(0) ack 2001 // Previously the ACK below would be delayed by 40ms +0.000 > [ect01] E. 2:2(0) ack 3001 +0.500 < F. 9501:9501(0) ack 4 win 257 Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-20tcp: do not cancel delay-AcK on DCTCP special ACKYuchung Cheng
Currently when a DCTCP receiver delays an ACK and receive a data packet with a different CE mark from the previous one's, it sends two immediate ACKs acking previous and latest sequences respectly (for ECN accounting). Previously sending the first ACK may mark off the delayed ACK timer (tcp_event_ack_sent). This may subsequently prevent sending the second ACK to acknowledge the latest sequence (tcp_ack_snd_check). The culprit is that tcp_send_ack() assumes it always acknowleges the latest sequence, which is not true for the first special ACK. The fix is to not make the assumption in tcp_send_ack and check the actual ack sequence before cancelling the delayed ACK. Further it's safer to pass the ack sequence number as a local variable into tcp_send_ack routine, instead of intercepting tp->rcv_nxt to avoid future bugs like this. Reported-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Yuchung Cheng <ycheng@google.com> Acked-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-07-20Merge tag 'iommu-fixes-v4.18-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU fix from Joerg Roedel: "Only one revert, for an an Intel VT-d patch that caused issues with the i915 GPU driver" * tag 'iommu-fixes-v4.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: Revert "iommu/vt-d: Clean up pasid quirk for pre-production devices"
generated by cgit (git 2.34.1) at 2025-09-12 04:01:57 +0000