| Age | Commit message (Collapse) | Author |
|---|
|
Matthew Wilcox reported that, while he was looking at memmove_page(), he
realized that it can't actually work.
The reasons are hidden in its implementation, which makes use of memmove()
on logical addresses provided by kmap_local_page(). memmove() does the
wrong thing when it tests "if (dest <= src)".
Therefore, delete memmove_page().
No need to change any other code because we have no call sites of
memmove_page() across the whole kernel.
Link: https://lkml.kernel.org/r/20220606141533.555-1-fmdefrancesco@gmail.com
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Reported-by: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Since commit 0f91d13366a4 ("mm/damon: simplify stop mechanism") delete
kdamond_stop and change to use kthread stop mechanism, these obsolete
comments should be removed accordingly.
Link: https://lkml.kernel.org/r/20220531020421.46849-1-zhouchengming@bytedance.com
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
I observed that for each of the shared file-backed page faults, we're very
likely to retry one more time for the 1st write fault upon no page. It's
because we'll need to release the mmap lock for dirty rate limit purpose
with balance_dirty_pages_ratelimited() (in fault_dirty_shared_page()).
Then after that throttling we return VM_FAULT_RETRY.
We did that probably because VM_FAULT_RETRY is the only way we can return
to the fault handler at that time telling it we've released the mmap lock.
However that's not ideal because it's very likely the fault does not need
to be retried at all since the pgtable was well installed before the
throttling, so the next continuous fault (including taking mmap read lock,
walk the pgtable, etc.) could be in most cases unnecessary.
It's not only slowing down page faults for shared file-backed, but also add
more mmap lock contention which is in most cases not needed at all.
To observe this, one could try to write to some shmem page and look at
"pgfault" value in /proc/vmstat, then we should expect 2 counts for each
shmem write simply because we retried, and vm event "pgfault" will capture
that.
To make it more efficient, add a new VM_FAULT_COMPLETED return code just to
show that we've completed the whole fault and released the lock. It's also
a hint that we should very possibly not need another fault immediately on
this page because we've just completed it.
This patch provides a ~12% perf boost on my aarch64 test VM with a simple
program sequentially dirtying 400MB shmem file being mmap()ed and these are
the time it needs:
Before: 650.980 ms (+-1.94%)
After: 569.396 ms (+-1.38%)
I believe it could help more than that.
We need some special care on GUP and the s390 pgfault handler (for gmap
code before returning from pgfault), the rest changes in the page fault
handlers should be relatively straightforward.
Another thing to mention is that mm_account_fault() does take this new
fault as a generic fault to be accounted, unlike VM_FAULT_RETRY.
I explicitly didn't touch hmm_vma_fault() and break_ksm() because they do
not handle VM_FAULT_RETRY even with existing code, so I'm literally keeping
them as-is.
Link: https://lkml.kernel.org/r/20220530183450.42886-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vineet Gupta <vgupta@kernel.org>
Acked-by: Guo Ren <guoren@kernel.org>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> [arm part]
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Stafford Horne <shorne@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Brian Cain <bcain@quicinc.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Richard Weinberger <richard@nod.at>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Janosch Frank <frankja@linux.ibm.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Will Deacon <will@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Chris Zankel <chris@zankel.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Cc: Rich Felker <dalias@libc.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Helge Deller <deller@gmx.de>
Cc: Yoshinori Sato <ysato@users.osdn.me>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
uprobes work by raising a trap, setting a task flag from within the
interrupt handler, and processing the actual work for the uprobe on the
way back to userspace. As a result, uprobe handlers already execute in a
might_fault/_sleep context. The primary obstacle to sleepable bpf uprobe
programs is therefore on the bpf side.
Namely, the bpf_prog_array attached to the uprobe is protected by normal
rcu. In order for uprobe bpf programs to become sleepable, it has to be
protected by the tasks_trace rcu flavor instead (and kfree() called after
a corresponding grace period).
Therefore, the free path for bpf_prog_array now chains a tasks_trace and
normal grace periods one after the other.
Users who iterate under tasks_trace read section would
be safe, as would users who iterate under normal read sections (from
non-sleepable locations).
The downside is that the tasks_trace latency affects all perf_event-attached
bpf programs (and not just uprobe ones). This is deemed safe given the
possible attach rates for kprobe/uprobe/tp programs.
Separately, non-sleepable programs need access to dynamically sized
rcu-protected maps, so bpf_run_prog_array_sleepables now conditionally takes
an rcu read section, in addition to the overarching tasks_trace section.
Signed-off-by: Delyan Kratunov <delyank@fb.com>
Link: https://lore.kernel.org/r/ce844d62a2fd0443b08c5ab02e95bc7149f9aeb1.1655248076.git.delyank@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
In order to add a version of bpf_prog_run_array which accesses the
bpf_prog->aux member, bpf_prog needs to be more than a forward
declaration inside bpf.h.
Given that filter.h already includes bpf.h, this merely reorders
the type declarations for filter.h users. bpf.h users now have access to
bpf_prog internals.
Signed-off-by: Delyan Kratunov <delyank@fb.com>
Link: https://lore.kernel.org/r/3ed7824e3948f22d84583649ccac0ff0d38b6b58.1655248076.git.delyank@fb.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Currently unpoison_memory(unsigned long pfn) is designed for soft
poison(hwpoison-inject) only. Since 17fae1294ad9d, the KPTE gets cleared
on a x86 platform once hardware memory corrupts.
Unpoisoning a hardware corrupted page puts page back buddy only, the
kernel has a chance to access the page with *NOT PRESENT* KPTE. This
leads BUG during accessing on the corrupted KPTE.
Suggested by David&Naoya, disable unpoison mechanism when a real HW error
happens to avoid BUG like this:
Unpoison: Software-unpoisoned page 0x61234
BUG: unable to handle page fault for address: ffff888061234000
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 2c01067 P4D 2c01067 PUD 107267063 PMD 10382b063 PTE 800fffff9edcb062
Oops: 0002 [#1] PREEMPT SMP NOPTI
CPU: 4 PID: 26551 Comm: stress Kdump: loaded Tainted: G M OE 5.18.0.bm.1-amd64 #7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) ...
RIP: 0010:clear_page_erms+0x7/0x10
Code: ...
RSP: 0000:ffffc90001107bc8 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000901 RCX: 0000000000001000
RDX: ffffea0001848d00 RSI: ffffea0001848d40 RDI: ffff888061234000
RBP: ffffea0001848d00 R08: 0000000000000901 R09: 0000000000001276
R10: 0000000000000003 R11: 0000000000000000 R12: 0000000000000001
R13: 0000000000000000 R14: 0000000000140dca R15: 0000000000000001
FS: 00007fd8b2333740(0000) GS:ffff88813fd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff888061234000 CR3: 00000001023d2005 CR4: 0000000000770ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
prep_new_page+0x151/0x170
get_page_from_freelist+0xca0/0xe20
? sysvec_apic_timer_interrupt+0xab/0xc0
? asm_sysvec_apic_timer_interrupt+0x1b/0x20
__alloc_pages+0x17e/0x340
__folio_alloc+0x17/0x40
vma_alloc_folio+0x84/0x280
__handle_mm_fault+0x8d4/0xeb0
handle_mm_fault+0xd5/0x2a0
do_user_addr_fault+0x1d0/0x680
? kvm_read_and_reset_apf_flags+0x3b/0x50
exc_page_fault+0x78/0x170
asm_exc_page_fault+0x27/0x30
Link: https://lkml.kernel.org/r/20220615093209.259374-2-pizhenwei@bytedance.com
Fixes: 847ce401df392 ("HWPOISON: Add unpoisoning support")
Fixes: 17fae1294ad9d ("x86/{mce,mm}: Unmap the entire page if the whole page is affected and poisoned")
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Naoya Horiguchi <naoya.horiguchi@nec.com>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org> [5.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The commit referenced below subtly and inadvertently changed the logic to
disallow pinning of zero pfns. This breaks device assignment with vfio
and potentially various other users of gup. Exclude the zero page test
from the negation.
Link: https://lkml.kernel.org/r/165490039431.944052.12458624139225785964.stgit@omen
Fixes: 1c563432588d ("mm: fix is_pinnable_page against a cma page")
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Reported-by: Yishai Hadas <yishaih@nvidia.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: John Dias <joaodias@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Zhangfei Gao <zhangfei.gao@linaro.org>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Yi Liu <yi.l.liu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This function always returns 0. We can make it return void to simplify the
code. Also, no caller ever checks the return value of this function.
Link: https://lore.kernel.org/r/20220616080210.18531-1-mgurtovoy@nvidia.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Export below regulator functions to allow vendors to
customize regulator configuration in their own platforms.
int ufshcd_populate_vreg(struct device *dev, const char *name,
struct ufs_vreg **out_vreg);
int ufshcd_get_vreg(struct device *dev, struct ufs_vreg *vreg);
Link: https://lore.kernel.org/r/20220616053725.5681-10-stanley.chu@mediatek.com
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Some MediaTek SoC chips need special flow for power mode change, especially
for chips supporting HS-G5.
Enable the workaround by setting the host-specific capability.
Link: https://lore.kernel.org/r/20220616053725.5681-4-stanley.chu@mediatek.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: CC Chou <cc.chou@mediatek.com>
Signed-off-by: Eddie Huang <eddie.huang@mediatek.com>
Signed-off-by: Dennis Yu <tun-yu.yu@mediatek.com>
Signed-off-by: Peter Wang <peter.want@medaitek.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Export ufshcd_uic_change_pwr_mode() to allow vendors to use it for
SoC-specific power mode change design limitations.
Link: https://lore.kernel.org/r/20220616053725.5681-2-stanley.chu@mediatek.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Rearrange all the unipro and mphy addresses in their increasing order.
Link: https://lore.kernel.org/r/20220615121204.16642-3-alim.akhtar@samsung.com
Reviewed-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
UFS core already uses RX_MIN_ACTIVATETIME_CAPABILITY macro, let's use the
same in driver as well instead of having a different macro name for the
same offset.
Link: https://lore.kernel.org/r/20220615121204.16642-2-alim.akhtar@samsung.com
Reviewed-by: Chanho Park <chanho61.park@samsung.com>
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
It's one argument, vaddr_iomem, not 2 (vaddr and _iomem).
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220610232130.2865479-3-lucas.demarchi@intel.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Two fixes for TTM, one for a NULL pointer dereference and one to make sure
the buffer is pinned prior to a bulk move, and a fix for a spurious
compiler warning.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220616072519.qwrsefsemejefowu@houat
|
|
q->elevator is referred in blk_mq_has_sqsched() without any protection,
no .q_usage_counter is held, no queue srcu and rcu read lock is held,
so potential use-after-free may be triggered.
Fix the issue by adding one queue flag for checking if the elevator
uses single queue style dispatch. Meantime the elevator feature flag
of ELEVATOR_F_MQ_AWARE isn't needed any more.
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220616014401.817001-3-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Each cset (css_set) is pinned by its tasks. When we're moving tasks around
across csets for a migration, we need to hold the source and destination
csets to ensure that they don't go away while we're moving tasks about. This
is done by linking cset->mg_preload_node on either the
mgctx->preloaded_src_csets or mgctx->preloaded_dst_csets list. Using the
same cset->mg_preload_node for both the src and dst lists was deemed okay as
a cset can't be both the source and destination at the same time.
Unfortunately, this overloading becomes problematic when multiple tasks are
involved in a migration and some of them are identity noop migrations while
others are actually moving across cgroups. For example, this can happen with
the following sequence on cgroup1:
#1> mkdir -p /sys/fs/cgroup/misc/a/b
#2> echo $$ > /sys/fs/cgroup/misc/a/cgroup.procs
#3> RUN_A_COMMAND_WHICH_CREATES_MULTIPLE_THREADS &
#4> PID=$!
#5> echo $PID > /sys/fs/cgroup/misc/a/b/tasks
#6> echo $PID > /sys/fs/cgroup/misc/a/cgroup.procs
the process including the group leader back into a. In this final migration,
non-leader threads would be doing identity migration while the group leader
is doing an actual one.
After #3, let's say the whole process was in cset A, and that after #4, the
leader moves to cset B. Then, during #6, the following happens:
1. cgroup_migrate_add_src() is called on B for the leader.
2. cgroup_migrate_add_src() is called on A for the other threads.
3. cgroup_migrate_prepare_dst() is called. It scans the src list.
4. It notices that B wants to migrate to A, so it tries to A to the dst
list but realizes that its ->mg_preload_node is already busy.
5. and then it notices A wants to migrate to A as it's an identity
migration, it culls it by list_del_init()'ing its ->mg_preload_node and
putting references accordingly.
6. The rest of migration takes place with B on the src list but nothing on
the dst list.
This means that A isn't held while migration is in progress. If all tasks
leave A before the migration finishes and the incoming task pins it, the
cset will be destroyed leading to use-after-free.
This is caused by overloading cset->mg_preload_node for both src and dst
preload lists. We wanted to exclude the cset from the src list but ended up
inadvertently excluding it from the dst list too.
This patch fixes the issue by separating out cset->mg_preload_node into
->mg_src_preload_node and ->mg_dst_preload_node, so that the src and dst
preloadings don't interfere with each other.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Mukesh Ojha <quic_mojha@quicinc.com>
Reported-by: shisiyuan <shisiyuan19870131@gmail.com>
Link: http://lkml.kernel.org/r/1654187688-27411-1-git-send-email-shisiyuan@xiaomi.com
Link: https://www.spinics.net/lists/cgroups/msg33313.html
Fixes: f817de98513d ("cgroup: prepare migration path for unified hierarchy")
Cc: stable@vger.kernel.org # v3.16+
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Mostly driver fixes.
Current release - regressions:
- Revert "net: Add a second bind table hashed by port and address",
needs more work
- amd-xgbe: use platform_irq_count(), static setup of IRQ resources
had been removed from DT core
- dts: at91: ksz9477_evb: add phy-mode to fix port/phy validation
Current release - new code bugs:
- hns3: modify the ring param print info
Previous releases - always broken:
- axienet: make the 64b addressable DMA depends on 64b architectures
- iavf: fix issue with MAC address of VF shown as zero
- ice: fix PTP TX timestamp offset calculation
- usb: ax88179_178a needs FLAG_SEND_ZLP
Misc:
- document some net.sctp.* sysctls"
* tag 'net-5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (31 commits)
net: axienet: add missing error return code in axienet_probe()
Revert "net: Add a second bind table hashed by port and address"
net: ax25: Fix deadlock caused by skb_recv_datagram in ax25_recvmsg
net: usb: ax88179_178a needs FLAG_SEND_ZLP
MAINTAINERS: add include/dt-bindings/net to NETWORKING DRIVERS
ARM: dts: at91: ksz9477_evb: fix port/phy validation
net: bgmac: Fix an erroneous kfree() in bgmac_remove()
ice: Fix memory corruption in VF driver
ice: Fix queue config fail handling
ice: Sync VLAN filtering features for DVM
ice: Fix PTP TX timestamp offset calculation
mlxsw: spectrum_cnt: Reorder counter pools
docs: networking: phy: Fix a typo
amd-xgbe: Use platform_irq_count()
octeontx2-vf: Add support for adaptive interrupt coalescing
xilinx: Fix build on x86.
net: axienet: Use iowrite64 to write all 64b descriptor pointers
net: axienet: make the 64b addresable DMA depends on 64b archectures
net: hns3: fix tm port shapping of fibre port is incorrect after driver initialization
net: hns3: fix PF rss size initialization bug
...
|
|
This reverts:
commit d5a42de8bdbe ("net: Add a second bind table hashed by port and address")
commit 538aaf9b2383 ("selftests: Add test for timing a bind request to a port with a populated bhash entry")
Link: https://lore.kernel.org/netdev/20220520001834.2247810-1-kuba@kernel.org/
There are a few things that need to be fixed here:
* Updating bhash2 in cases where the socket's rcv saddr changes
* Adding bhash2 hashbucket locks
Links to syzbot reports:
https://lore.kernel.org/netdev/00000000000022208805e0df247a@google.com/
https://lore.kernel.org/netdev/0000000000003f33bc05dfaf44fe@google.com/
Fixes: d5a42de8bdbe ("net: Add a second bind table hashed by port and address")
Reported-by: syzbot+015d756bbd1f8b5c8f09@syzkaller.appspotmail.com
Reported-by: syzbot+98fd2d1422063b0f8c44@syzkaller.appspotmail.com
Reported-by: syzbot+0a847a982613c6438fba@syzkaller.appspotmail.com
Signed-off-by: Joanne Koong <joannelkoong@gmail.com>
Link: https://lore.kernel.org/r/20220615193213.2419568-1-joannelkoong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Commit cc6111375cec ("ARM: drop efm32 platform") removed the platform,
so no need to still carry the bindings.
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220615210720.6363-1-wsa@kernel.org
|
|
This merge commit includes shared updates to net-next and rdma-next
for upcoming mlx5 features.
1) Updated HW bits and definitions for upcoming features
1.1) vport debug counters
1.2) flow meter
1.3) Execute ASO action for flow entry
1.4) enhanced CQE compression
2) Add ICM header-modify-pattern RDMA API
Leon Says
=========
SW steering manipulates packet's header using "modifying header" actions.
Many of these actions do the same operation, but use different data each time.
Currently we create and keep every one of these actions, which use expensive
and limited resources.
Now we introduce a new mechanism - pattern and argument, which splits
a modifying action into two parts:
1. action pattern: contains the operations to be applied on packet's header,
mainly set/add/copy of fields in the packet
2. action data/argument: contains the data to be used by each operation
in the pattern.
This way we reuse same patterns with different arguments to create new
modifying actions, and since many actions share the same operations, we end
up creating a small number of patterns that we keep in a dedicated cache.
These modify header patterns are implemented as new type of ICM memory,
so the following kernel patch series add the support for this new ICM type.
==========
Link: https://lore.kernel.org/all/20220614184028.51548-1-saeed@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The "irq" field of struct dw_edma_chip was never used. Remove it.
Link: https://lore.kernel.org/r/20220524152159.2370739-2-Frank.Li@nxp.com
Tested-by: Serge Semin <fancer.lancer@gmail.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-By: Vinod Koul <vkoul@kernel.org>
|
|
noop_backing_dev_info is used by superblocks of various
pseudofilesystems such as kdevtmpfs. After commit 10e14073107d
("writeback: Fix inode->i_io_list not be protected by inode->i_lock
error") this broke because __mark_inode_dirty() started to access more
fields from noop_backing_dev_info and this led to crashes inside
locked_inode_to_wb_and_lock_list() called from __mark_inode_dirty().
Fix the problem by initializing noop_backing_dev_info before the
filesystems get mounted.
Fixes: 10e14073107d ("writeback: Fix inode->i_io_list not be protected by inode->i_lock error")
Reported-and-tested-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reported-and-tested-by: Alexandru Elisei <alexandru.elisei@arm.com>
Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
Add a netevent callback for cma, mainly to catch NETEVENT_NEIGH_UPDATE.
Previously, when a system with failover MAC mechanism change its MAC address
during a CM connection attempt, the RDMA-CM would take a lot of time till
it disconnects and timesout due to the incorrect MAC address.
Now when we get a NETEVENT_NEIGH_UPDATE we check if it is due to a failover
MAC change and if so, we instantly destroy the CM and notify the user in order
to spare the unnecessary waiting for the timeout.
Link: https://lore.kernel.org/r/bb255c9e301cd50b905663b8e73f7f5133d0e4c5.1654601342.git.leonro@nvidia.com
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
When a driver keeps a clock prepared (or enabled) during the whole
lifetime of the driver, these helpers allow to simplify the drivers.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Alexandru Ardelean <aardelean@deviqon.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220520075737.758761-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Make use of "Context:" and "Return:". Mention that the clk is not to be
expected to be prepared, previously only not being enabled was mentioned
which probably dates from the times when the concept of clk preparation
wasn't invented yet.
Also describe devm_clk_get_optional() fully instead of just referencing
devm_clk_get().
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220520075737.758761-2-u.kleine-koenig@pengutronix.de
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
To support reset of infra_ao, add the index of infra_ao reset of
thermal/svs for MT8186.
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220523093346.28493-18-rex-bc.chen@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
To support reset of infra_ao, add the index of infra_ao reset of
thermal/svs/pcei for MT8192 and thermal/svs for MT8195.
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
[Nícolas: Test for MT8192]
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20220523093346.28493-14-rex-bc.chen@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening fixes from Kees Cook:
- Correctly handle vm_map areas in hardened usercopy (Matthew Wilcox)
- Adjust CFI RCU usage to avoid boot splats with cpuidle (Sami Tolvanen)
* tag 'hardening-v5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
usercopy: Make usercopy resilient against ridiculously large copies
usercopy: Cast pointer to an integer once
usercopy: Handle vm_map_ram() areas
cfi: Fix __cfi_slowpath_diag RCU usage with cpuidle
|
|
There is no reason to include OF as we only need to forward declare
'of_phandle_args'. Previously, some drivers were actually relying on
this for some headers (those were already fixed).
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20220610084545.547700-20-nuno.sa@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
There are reports that the console kthreads block the global console
lock when the system is going down, for example, reboot, panic.
First part of the solution was to block kthreads in these problematic
system states so they stopped handling newly added messages.
Second part of the solution is to wait when for the kthreads when
they are actively printing. It solves the problem when a message
was printed before the system entered the problematic state and
the kthreads managed to step in.
A busy waiting has to be used because panic() can be called in any
context and in an unknown state of the scheduler.
There must be a timeout because the kthread might get stuck or sleeping
and never release the lock. The timeout 10s is an arbitrary value
inspired by the softlockup timeout.
Link: https://lore.kernel.org/r/20220610205038.GA3050413@paulmck-ThinkPad-P17-Gen-1
Link: https://lore.kernel.org/r/CAMdYzYpF4FNTBPZsEFeWRuEwSies36QM_As8osPWZSr2q-viEA@mail.gmail.com
Signed-off-by: Petr Mladek <pmladek@suse.com>
Tested-by: Paul E. McKenney <paulmck@kernel.org>
Link: https://lore.kernel.org/r/20220615162805.27962-3-pmladek@suse.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 5.20:
UAPI Changes:
* connector: export bpc limits in debugfs
* dma-buf: Print buffer name in debugfs
Cross-subsystem Changes:
* dma-buf: Improve dma-fence handling; Cleanups
* fbdev: Device-unregistering fixes
Core Changes:
* client: Only use driver-validated modes to avoid blank screen
* dp-aux: Make probing more reliable; Small fixes
* edit: CEA data-block iterators; Introduce struct drm_edid; Many cleanups
* gem: Don't use framebuffer format's non-exising color planes
* probe-helper: Use 640x480 as DisplayPort fallback; Refactoring
* scheduler: Don't kill jobs in interrupt context
Driver Changes:
* amdgpu: Use atomic fence helpers in DM; Fix VRAM address calculation;
Export CRTC bpc settings via debugfs
* bridge: Add TI-DLPC3433; anx7625: Fixes; fy07024di26a30d: Optional
GPIO reset; icn6211: Cleanups; ldb: Add reg and reg-name properties
to bindings, Kconfig fixes; lt9611: Fix display sensing; lt9611uxc:
Fixes; nwl-dsi: Fixes; ps8640: Cleanups; st7735r: Fixes; tc358767:
DSI/DPI refactoring and DSI-to-eDP support, Fixes; ti-sn65dsi83:
Fixes;
* gma500: Cleanup connector I2C handling
* hyperv: Unify VRAM allocation of Gen1 and Gen2
* i915: export CRTC bpc settings via debugfs
* meson: Support YUV422 output; Refcount fixes
* mgag200: Support damage clipping; Support gamma handling; Protect
concurrent HW access; Fixes to connector; Store model-specific limits
in device-info structure; Cleanups
* nouveau: Fixes and Cleanups
* panel: Kconfig fixes
* panfrost: Valhall support
* r128: Fix bit-shift overflow
* rockchip: Locking fixes in error path; Minor cleanups
* ssd130x: Fix built-in linkage
* ttm: Cleanups
* udl; Always advertize VGA connector
* fbdev/vesa: Support COMPILE_TEST
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YqBtumw05JZDEZE2@linux-uq9g
|
|
Merge series from Li Chen <lchen.firstlove@zohomail.com>
This series proposes to add simple bit operations for setting, clearing
and testing specific bits with regmap_field and uses them in one of the
sunxi drivers.
|
|
Add logging support for MMIO high level accessors such as read{b,w,l,q}
and their relaxed versions to aid in debugging unexpected crashes/hangs
caused by the corresponding MMIO operation.
Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Generic MMIO read/write i.e., __raw_{read,write}{b,l,w,q} accessors
are typically used to read/write from/to memory mapped registers
and can cause hangs or some undefined behaviour in following few
cases,
* If the access to the register space is unclocked, for example: if
there is an access to multimedia(MM) block registers without MM
clocks.
* If the register space is protected and not set to be accessible from
non-secure world, for example: only EL3 (EL: Exception level) access
is allowed and any EL2/EL1 access is forbidden.
* If xPU(memory/register protection units) is controlling access to
certain memory/register space for specific clients.
and more...
Such cases usually results in instant reboot/SErrors/NOC or interconnect
hangs and tracing these register accesses can be very helpful to debug
such issues during initial development stages and also in later stages.
So use ftrace trace events to log such MMIO register accesses which
provides rich feature set such as early enablement of trace events,
filtering capability, dumping ftrace logs on console and many more.
Sample output:
rwmmio_write: __qcom_geni_serial_console_write+0x160/0x1e0 width=32 val=0xa0d5d addr=0xfffffbfffdbff700
rwmmio_post_write: __qcom_geni_serial_console_write+0x160/0x1e0 width=32 val=0xa0d5d addr=0xfffffbfffdbff700
rwmmio_read: qcom_geni_serial_poll_bit+0x94/0x138 width=32 addr=0xfffffbfffdbff610
rwmmio_post_read: qcom_geni_serial_poll_bit+0x94/0x138 width=32 val=0x0 addr=0xfffffbfffdbff610
Co-developed-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Signed-off-by: Prasad Sodagudi <psodagud@codeaurora.org>
Signed-off-by: Sai Prakash Ranjan <quic_saipraka@quicinc.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
PREEMPT_RT preempts softirqs and the current implementation avoids
do_softirq_own_stack() and only uses __do_softirq().
Disable the unused softirqs stacks on PREEMPT_RT to save some memory and
ensure that do_softirq_own_stack() is not used bwcause it is not expected.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add 'struct pingroup' to represent pingroup and 'PINCTRL_PINGROUP'
macro for inline use. Both are used to manage and represent
larger number of pingroups.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20220601152900.1012813-2-Basavaraj.Natikar@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
We have set/clear/test operations for regmap, but not for regmap_field yet.
So let's introduce regmap_field helpers too.
In many instances regmap_field_update_bits() is used for simple bit setting
and clearing. In these cases the last argument is redundant and we can
hide it with a static inline function.
This adds three new helpers for simple bit operations: set_bits,
clear_bits and test_bits (the last one defined as a regular function).
Signed-off-by: Li Chen <lchen@ambarella.com>
Link: https://lore.kernel.org/r/180eef422c3.deae9cd960729.8518395646822099769@zohomail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Commit b05b9f5f9dcf ("x86, mirror: x86 enabling - find mirrored memory
ranges") introduce the efi_find_mirror() function on x86. In order to reuse
the API we make it public.
Arm64 can support mirrored memory too, so function efi_find_mirror() is added to
efi_init() to this support for arm64.
Since efi_init() is shared by ARM, arm64 and riscv, this patch will bring
mirror memory support for these architectures, but this support is only tested
in arm64.
Signed-off-by: Ma Wupeng <mawupeng1@huawei.com>
Link: https://lore.kernel.org/r/20220614092156.1972846-2-mawupeng1@huawei.com
[ardb: fix subject to better reflect the payload]
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Add platform abstraction for the Meteor Lake platform.
This platform has significant differences compared to the TGL/ADL
generation: it relies on new hardware using the code name 'ACE' and
only supports the INTEL_IPC4 protocol and firmware architecture based
on the Zephyr RTOS
Co-developed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20220615084348.3489-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The purpose of CONFIG_SND_CTL_VALIDATION is rather to enable the
debugging feature for the control API. The validation is only a part
of it. Let's rename it to be more explicit and intuitive.
While we're at it, let's advertise, give more comment to recommend
this feature for development in the kconfig help text.
Link: https://lore.kernel.org/r/20220609120219.3937-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
The control elements are managed in a single linked list and we
traverse the whole list for matching each numid or ctl id per every
inquiry of a control element. This is OK-ish for a small number of
elements but obviously it doesn't scale. Especially the matching with
the ctl id takes time because it checks each field of the snd_ctl_id
element, e.g. the name string is matched with strcmp().
This patch adds the hash tables with Xarray for improving the lookup
speed of a control element. There are two xarray tables added to the
card; one for numid and another for ctl id. For the numid, we use the
numid as the index, while for the ctl id, we calculate a hash key.
The lookup is done via a single xa_load() execution. As long as the
given control element is found on the Xarray table, that's fine, we
can give back a quick lookup result. The problem is when no entry
hits on the table, and for this case, we have a slight optimization.
Namely, the driver checks whether we had a collision on Xarray table,
and do a fallback search (linear lookup of the full entries) only if a
hash key collision happened beforehand.
So, in theory, the inquiry for a non-existing element might take still
time even with this patch in a worst case, but this must be pretty
rare.
The feature is enabled via CONFIG_SND_CTL_FAST_LOOKUP, which is turned
on as default. For simplicity, the option can be turned off only when
CONFIG_EXPERT is set ("You are expert? Then you manage 1000 knobs").
Link: https://lore.kernel.org/r/20211028130027.18764-1-tiwai@suse.de
Link: https://lore.kernel.org/r/20220609180504.775-1-tiwai@suse.de
Link: https://lore.kernel.org/all/cover.1653813866.git.quic_rbankapu@quicinc.com/
Link: https://lore.kernel.org/r/20220610064537.18660-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Saeed Mahameed says:
====================
mlx5-next: updates 2022-06-14
1) Updated HW bits and definitions for upcoming features
1.1) vport debug counters
1.2) flow meter
1.3) Execute ASO action for flow entry
1.4) enhanced CQE compression
2) Add ICM header-modify-pattern RDMA API
Leon Says
=========
SW steering manipulates packet's header using "modifying header" actions.
Many of these actions do the same operation, but use different data each time.
Currently we create and keep every one of these actions, which use expensive
and limited resources.
Now we introduce a new mechanism - pattern and argument, which splits
a modifying action into two parts:
1. action pattern: contains the operations to be applied on packet's header,
mainly set/add/copy of fields in the packet
2. action data/argument: contains the data to be used by each operation
in the pattern.
This way we reuse same patterns with different arguments to create new
modifying actions, and since many actions share the same operations, we end
up creating a small number of patterns that we keep in a dedicated cache.
These modify header patterns are implemented as new type of ICM memory,
so the following kernel patch series add the support for this new ICM type.
==========
* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Add bits and fields to support enhanced CQE compression
net/mlx5: Remove not used MLX5_CAP_BITS_RW_MASK
net/mlx5: group fdb cleanup to single function
net/mlx5: Add support EXECUTE_ASO action for flow entry
net/mlx5: Add HW definitions of vport debug counters
net/mlx5: Add IFC bits and enums for flow meter
RDMA/mlx5: Support handling of modify-header pattern ICM area
net/mlx5: Manage ICM of type modify-header pattern
net/mlx5: Introduce header-modify-pattern ICM properties
====================
Link: https://lore.kernel.org/r/20220614184028.51548-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add a new KFD ioctl to return the largest possible memory size that
can be allocated as a buffer object using
kfd_ioctl_alloc_memory_of_gpu. It attempts to use exactly the same
accept/reject criteria as that function so that allocating a new
buffer object of the size returned by this new ioctl is guaranteed to
succeed, barring races with other allocating tasks.
This IOCTL will be used by libhsakmt:
https://www.mail-archive.com/amd-gfx@lists.freedesktop.org/msg75743.html
Signed-off-by: Daniel Phillips <Daniel.Phillips@amd.com>
Signed-off-by: David Yat Sin <David.YatSin@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Commit e81fb4198e27 ("netfs: Further cleanups after struct netfs_inode
wrapper introduced") changed the argument types and names, and actually
updated the comment too (although that was thanks to David Howells, not
me: my original patch only changed the code).
But the comment fixup didn't go quite far enough, and didn't change the
argument name in the comment, resulting in
include/linux/netfs.h:314: warning: Function parameter or member 'ctx' not described in 'netfs_inode_init'
include/linux/netfs.h:314: warning: Excess function parameter 'inode' description in 'netfs_inode_init'
during htmldoc generation.
Fixes: e81fb4198e27 ("netfs: Further cleanups after struct netfs_inode wrapper introduced")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This partially reverts a7c41b4687f5902af70cd559806990930c8a307b
Even though IORING_CLOSE_FD_AND_FILE_SLOT might save cycles for some
users, but it tries to do two things at a time and it's not clear how to
handle errors and what to return in a single result field when one part
fails and another completes well. Kill it for now.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/837c745019b3795941eee4fcfd7de697886d645b.1655224415.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Minor spelling fix spotted in bpf_verifier.h. Spelling is no big deal,
but it is still an improvement when reading through the code.
Signed-off-by: Hongyi Lu <jwnhy0@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220613211633.58647-1-jwnhy0@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 MMIO stale data fixes from Thomas Gleixner:
"Yet another hw vulnerability with a software mitigation: Processor
MMIO Stale Data.
They are a class of MMIO-related weaknesses which can expose stale
data by propagating it into core fill buffers. Data which can then be
leaked using the usual speculative execution methods.
Mitigations include this set along with microcode updates and are
similar to MDS and TAA vulnerabilities: VERW now clears those buffers
too"
* tag 'x86-bugs-2022-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/speculation/mmio: Print SMT warning
KVM: x86/speculation: Disable Fill buffer clear within guests
x86/speculation/mmio: Reuse SRBDS mitigation for SBDS
x86/speculation/srbds: Update SRBDS mitigation selection
x86/speculation/mmio: Add sysfs reporting for Processor MMIO Stale Data
x86/speculation/mmio: Enable CPU Fill buffer clearing on idle
x86/bugs: Group MDS, TAA & Processor MMIO Stale Data mitigations
x86/speculation/mmio: Add mitigation for Processor MMIO Stale Data
x86/speculation: Add a common function for MD_CLEAR mitigation update
x86/speculation/mmio: Enumerate Processor MMIO Stale Data bug
Documentation: Add documentation for Processor MMIO Stale Data
|
|
Add trace points as are implemented in KVM host halt polling.
This helps tune guest halt polling params.
Signed-off-by: Eiichi Tsukata <eiichi.tsukata@nutanix.com>
Acked-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Discussion of the series:
https://lore.kernel.org/all/20220405135758.774016-1-catalin.marinas@arm.com/
mm, arm64: Reduce ARCH_KMALLOC_MINALIGN brought to my attention that
our current IIO usage of L1CACHE_ALIGN is insufficient as their are Arm
platforms out their with non coherent DMA and larger cache lines at
at higher levels of their cache hierarchy.
Rename the define to make it's purpose more explicit. It will be used
much more widely going forwards (to replace incorrect ____cacheline_aligned
markings.
Note this patch will greatly reduce the padding on some architectures
that have smaller requirements for DMA safe buffers.
The history of changing values of ARCH_KMALLOC_MINALIGN via
ARCH_DMA_MINALIGN on arm64 is rather complex. I'm not tagging this
as fixing a particular patch from that route as it's not clear what to tag.
Most recently a change to bring them back inline was reverted because
of some Qualcomm Kryo cores with an L2 cache with 128-byte lines
sitting above the point of coherency.
c1132702c71f Revert "arm64: cache: Lower ARCH_DMA_MINALIGN to 64 (L1_CACHE_BYTES)"
That reverts:
65688d2a05de arm64: cache: Lower ARCH_DMA_MINALIGN to 64 (L1_CACHE_BYTES) which
refers to the change originally being motivated by Thunder x1 performance
rather than correctness.
Fixes: 6f7c8ee585e9d ("staging:iio: Add ability to allocate private data space to iio_allocate_device")
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20220508175712.647246-2-jic23@kernel.org
|
