| Age | Commit message (Collapse) | Author |
|---|
|
Recent patches experiment with making it possible to allocate a new
superblock before opening the relevant block device. Naturally this has
intricate side-effects that we get to learn about while developing this.
Superblock allocators such as sget{_fc}() return with s_umount of the
new superblock held and lock ordering currently requires that block
level locks such as bdev_lock and open_mutex rank above s_umount.
Before aca740cecbe5 ("fs: open block device after superblock creation")
ordering was guaranteed to be correct as block devices were opened prior
to superblock allocation and thus s_umount wasn't held. But now s_umount
must be dropped before opening block devices to avoid locking
violations.
This has consequences. The main one being that iterators over
@super_blocks and @fs_supers that grab a temporary reference to the
superblock can now also grab s_umount before the caller has managed to
open block devices and called fill_super(). So whereas before such
iterators or concurrent mounts would have simply slept on s_umount until
SB_BORN was set or the superblock was discard due to initalization
failure they can now needlessly spin through sget{_fc}().
If the caller is sleeping on bdev_lock or open_mutex one caller waiting
on SB_BORN will always spin somewhere and potentially this can go on for
quite a while.
It should be possible to drop s_umount while allowing iterators to wait
on a nascent superblock to either be born or discarded. This patch
implements a wait_var_event() mechanism allowing iterators to sleep
until they are woken when the superblock is born or discarded.
This also allows us to avoid relooping through @fs_supers and
@super_blocks if a superblock isn't yet born or dying.
Link: aca740cecbe5 ("fs: open block device after superblock creation")
Reviewed-by: Jan Kara <jack@suse.cz>
Message-Id: <20230818-vfs-super-fixes-v3-v3-3-9f0b1876e46b@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The current code that marshalls the EFI runtime call arguments to hand
them off to a async helper does so in a type unsafe and slightly messy
manner - everything is cast to void* except for some integral types that
are passed by reference and dereferenced on the receiver end.
Let's clean this up a bit, and record the arguments of each runtime
service invocation exactly as they are issued, in a manner that permits
the compiler to check the types of the arguments at both ends.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
_DEFINE_DEV_PM_OPS() helps to define PM operations for the system sleep
and/or runtime PM cases. Some of the existing users want to have _noirq()
variants to be set. For that purpose introduce a new helper which sets
up _noirq() callbacks to be assigned and struct dev_pm_ops be provided.
Acked-by: "Rafael J. Wysocki" <rafael@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230717172821.62827-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
aio, io_uring, cachefiles and overlayfs, all open code an ugly variant
of file_{start,end}_write() to silence lockdep warnings.
Create helpers for this lockdep dance so we can use the helpers in all
the callers.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Message-Id: <20230817141337.1025891-4-amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
and use sb_end_write() instead of open coded version.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Message-Id: <20230817141337.1025891-3-amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Change legacy name master/slave to modern name host/target.
No functional changed.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230818093154.1183529-20-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Change legacy name master/slave to modern name host/target or controller.
No functional changed.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20230818093154.1183529-8-yangyingliang@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The v0 extent item has been deprecated for a long time, and we don't have
any report from the community either.
So it's time to remove the v0 extent specific error handling, and just
treat them as regular extent tree corruption.
This patch would remove the btrfs_print_v0_err() helper, and enhance the
involved error handling to treat them just as any extent tree
corruption. No reports regarding v0 extents have been seen since the
graceful handling was added in 2018.
This involves:
- btrfs_backref_add_tree_node()
This change is a little tricky, the new code is changed to only handle
BTRFS_TREE_BLOCK_REF_KEY and BTRFS_SHARED_BLOCK_REF_KEY.
But this is safe, as we have rejected any unknown inline refs through
btrfs_get_extent_inline_ref_type().
For keyed backrefs, we're safe to skip anything we don't know (that's
if it can pass tree-checker in the first place).
- btrfs_lookup_extent_info()
- lookup_inline_extent_backref()
- run_delayed_extent_op()
- __btrfs_free_extent()
- add_tree_block()
Regular error handling of unexpected extent tree item, and abort
transaction (if we have a trans handle).
- remove_extent_data_ref()
It's pretty much the same as the regular rejection of unknown backref
key.
But for this particular case, we can also remove a BUG_ON().
- extent_data_ref_count()
We can remove the BTRFS_EXTENT_REF_V0_KEY BUG_ON(), as it would be
rejected by the only caller.
- btrfs_print_leaf()
Remove the handling for BTRFS_EXTENT_REF_V0_KEY.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Fold folio_account_redirty into folio_redirty_for_writepage now
that all other users except for the also unused account_page_redirty
wrapper are gone.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
After commit 6bfd0133bee2 ("btrfs: raid56: switch scrub path to use a
single function"), the raid56 implementation no longer uses different
endio functions for RMW/recover/scrub.
All read operations end in submit_read_wait_bio_list(), while all write
operations end in submit_write_bios(). This means quite some trace
events are out-of-date and no longer utilized.
This patch would unify the trace events into just two:
- trace_raid56_read()
Replaces trace_raid56_read_partial(), trace_raid56_scrub_read() and
trace_raid56_scrub_read_recover().
- trace_raid56_write()
Replaces trace_raid56_write_stripe() and
trace_raid56_scrub_write_stripe().
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
get_super is unused now, remove it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Message-Id: <20230811100828.1897174-17-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
BLKFLSBUF is a historic ioctl that is called on a file handle to a
block device and syncs either the file system mounted on that block
device if there is one, or otherwise the just the data on the block
device.
Replace the get_super based syncing with a holder operation to remove
the last usage of get_super, and to also support syncing the file system
if the block device is not the main block device stored in s_dev.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Message-Id: <20230811100828.1897174-16-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Combine the newly merged bdev_mark_dead helper with the existing
mark_dead holder operation so that all operations that invalidate
a device that is dead or being removed now go through the holder
ops. This allows file systems to explicitly shutdown either ASAP
(for a surprise removal) or after writing back data (for an orderly
removal), and do so not only for the main device.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Message-Id: <20230811100828.1897174-15-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
We currently have two interfaces that take a block_devices and the find
a mounted file systems to flush or invaldidate data on it. Both are a
bit problematic because they only work for the "main" block devices
that is used as s_dev for the super_block, and because they don't call
into the file system at all.
Merge the two into a new bdev_mark_dead helper that does both the
syncing and invalidation and which is properly documented. This is
in preparation of merging the functionality into the ->mark_dead
holder operation so that it will work on additional block devices
used by a file systems and give us a single entry point for invalidation
of dead devices or media.
Note that a single standalone fsync_bdev call for an obscure ioctl
remains for now, but that one will also be deal with in a bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Message-Id: <20230811100828.1897174-14-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Hard code the events to DISK_EVENT_MEDIA_CHANGE as that is the only
useful use case, and drop the superfluous return value.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Message-Id: <20230811100828.1897174-9-hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
'arm/smmu', 'unisoc', 'x86/vt-d', 'x86/amd' and 'core' into next
|
|
The commit 06470f7468c8 ("mac80211: add API to allow filtering frames in BA sessions")
added reorder_buf_filtered to mark frames filtered by firmware, and it
can only work correctly if hw.max_rx_aggregation_subframes <= 64 since
it stores the bitmap in a u64 variable.
However, new HE or EHT devices can support BlockAck number up to 256 or
1024, and then using a higher subframe index leads UBSAN warning:
UBSAN: shift-out-of-bounds in net/mac80211/rx.c:1129:39
shift exponent 215 is too large for 64-bit type 'long long unsigned int'
Call Trace:
<IRQ>
dump_stack_lvl+0x48/0x70
dump_stack+0x10/0x20
__ubsan_handle_shift_out_of_bounds+0x1ac/0x360
ieee80211_release_reorder_frame.constprop.0.cold+0x64/0x69 [mac80211]
ieee80211_sta_reorder_release+0x9c/0x400 [mac80211]
ieee80211_prepare_and_rx_handle+0x1234/0x1420 [mac80211]
ieee80211_rx_list+0xaef/0xf60 [mac80211]
ieee80211_rx_napi+0x53/0xd0 [mac80211]
Since only old hardware that supports <=64 BlockAck uses
ieee80211_mark_rx_ba_filtered_frames(), limit the use as it is, so add a
WARN_ONCE() and comment to note to avoid using this function if hardware
capability is not suitable.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://lore.kernel.org/r/20230818014004.16177-1-pkshih@realtek.com
[edit commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Commit 67473b8194bc ("xen/events: Remove disfunct affinity spreading")
leave this unused declaration.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Rahul Singh <rahul.singh@arm.com>
Link: https://lore.kernel.org/r/20230801145413.40684-1-yuehaibing@huawei.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
There isn't any reason to not support REQ_OP_ZONE_RESET_ALL given everything
is actually handled in userspace, not mention it is pretty easy to support
RESET_ALL.
So enable REQ_OP_ZONE_RESET_ALL and let userspace handle it.
Verified by 'tools/zbc_reset_zone -all /dev/ublkb0' in libzbc[1] with
libublk-rs based ublk-zoned target prototype[2], follows command line
for creating ublk-zoned:
cargo run --example zoned -- add -1 1024 # add $dev_id $DEV_SIZE
[1] https://github.com/westerndigitalcorporation/libzbc
[2] https://github.com/ming1/libublk-rs/tree/zoned.v2
Cc: Niklas Cassel <Niklas.Cassel@wdc.com>
Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: Andreas Hindborg <a.hindborg@samsung.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230810124326.321472-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Setting IP_RECVERR and IPV6_RECVERR options to zero currently
purges the socket error queue, which was probably not expected
for zerocopy and tx_timestamp users.
I discovered this issue while preparing commit 6b5f43ea0815
("inet: move inet->recverr to inet->inet_flags"), I presume this
change does not need to be backported to stable kernels.
Add skb_errqueue_purge() helper to purge error messages only.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty") into tty-next
We need the serial-core fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
UDP sendmsg() is lockless, so ip_select_ident_segs()
can very well be run from multiple cpus [1]
Convert inet->inet_id to an atomic_t, but implement
a dedicated path for TCP, avoiding cost of a locked
instruction (atomic_add_return())
Note that this patch will cause a trivial merge conflict
because we added inet->flags in net-next tree.
v2: added missing change in
drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_cm.c
(David Ahern)
[1]
BUG: KCSAN: data-race in __ip_make_skb / __ip_make_skb
read-write to 0xffff888145af952a of 2 bytes by task 7803 on cpu 1:
ip_select_ident_segs include/net/ip.h:542 [inline]
ip_select_ident include/net/ip.h:556 [inline]
__ip_make_skb+0x844/0xc70 net/ipv4/ip_output.c:1446
ip_make_skb+0x233/0x2c0 net/ipv4/ip_output.c:1560
udp_sendmsg+0x1199/0x1250 net/ipv4/udp.c:1260
inet_sendmsg+0x63/0x80 net/ipv4/af_inet.c:830
sock_sendmsg_nosec net/socket.c:725 [inline]
sock_sendmsg net/socket.c:748 [inline]
____sys_sendmsg+0x37c/0x4d0 net/socket.c:2494
___sys_sendmsg net/socket.c:2548 [inline]
__sys_sendmmsg+0x269/0x500 net/socket.c:2634
__do_sys_sendmmsg net/socket.c:2663 [inline]
__se_sys_sendmmsg net/socket.c:2660 [inline]
__x64_sys_sendmmsg+0x57/0x60 net/socket.c:2660
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
read to 0xffff888145af952a of 2 bytes by task 7804 on cpu 0:
ip_select_ident_segs include/net/ip.h:541 [inline]
ip_select_ident include/net/ip.h:556 [inline]
__ip_make_skb+0x817/0xc70 net/ipv4/ip_output.c:1446
ip_make_skb+0x233/0x2c0 net/ipv4/ip_output.c:1560
udp_sendmsg+0x1199/0x1250 net/ipv4/udp.c:1260
inet_sendmsg+0x63/0x80 net/ipv4/af_inet.c:830
sock_sendmsg_nosec net/socket.c:725 [inline]
sock_sendmsg net/socket.c:748 [inline]
____sys_sendmsg+0x37c/0x4d0 net/socket.c:2494
___sys_sendmsg net/socket.c:2548 [inline]
__sys_sendmmsg+0x269/0x500 net/socket.c:2634
__do_sys_sendmmsg net/socket.c:2663 [inline]
__se_sys_sendmmsg net/socket.c:2660 [inline]
__x64_sys_sendmmsg+0x57/0x60 net/socket.c:2660
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0x184d -> 0x184e
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 7804 Comm: syz-executor.1 Not tainted 6.5.0-rc6-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/26/2023
==================================================================
Fixes: 23f57406b82d ("ipv4: avoid using shared IP generator for connected sockets")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
veth and vxcan need to make sure the ifindexes of the peer
are not negative, core does not validate this.
Using iproute2 with user-space-level checking removed:
Before:
# ./ip link add index 10 type veth peer index -1
# ip link show
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: enp1s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP mode DEFAULT group default qlen 1000
link/ether 52:54:00:74:b2:03 brd ff:ff:ff:ff:ff:ff
10: veth1@veth0: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 8a:90:ff:57:6d:5d brd ff:ff:ff:ff:ff:ff
-1: veth0@veth1: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether ae:ed:18:e6:fa:7f brd ff:ff:ff:ff:ff:ff
Now:
$ ./ip link add index 10 type veth peer index -1
Error: ifindex can't be negative.
This problem surfaced in net-next because an explicit WARN()
was added, the root cause is older.
Fixes: e6f8f1a739b6 ("veth: Allow to create peer link with given ifindex")
Fixes: a8f820a380a2 ("can: add Virtual CAN Tunnel driver (vxcan)")
Reported-by: syzbot+5ba06978f34abb058571@syzkaller.appspotmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add RoCE MACsec rules when a gid is added for the MACsec netdevice and
handle their cleanup when the gid is removed or the MACsec SA is deleted.
Also support alias IP for the MACsec device, as long as we don't have
more ips than what the gid table can hold.
In addition handle the case where a gid is added but there are still no
SAs added for the MACsec device, so the rules are added later on when
the SAs are added.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
Adds all the core steering helper functions that are needed in order
to setup RoCE steering rules which includes both the RX and TX rules
addition and deletion.
As well as exporting the function to be ready to use from the IB driver
where we expose functions to allow deletion of all rules, which is
needed when a GID is deleted, or a deletion of a specific rule when an SA
is deleted, and a similar manner for the rules addition.
These functions are used in a later patch by IB driver to trigger the
rules addition/deletion when needed.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
Add MACsec flow steering priorities in RDMA namespaces. This allows
adding tables/rules to forward RoCEv2 traffic to the MACsec crypto
tables in NIC_TX domain, and accept RoCEv2 traffic from NIC_RX domain.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
Handle MACsec IP ambiguity issue, since mlx5 hw can't support
programming both the MACsec and the physical gid when they have the same
IP address, because it wouldn't know to whom to steer the traffic.
Hence in such case we delete the physical gid from the hw gid table,
which would then cause all traffic sent over it to fail, and we'll only
be able to send traffic over the MACsec gid.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
to core
Since now MACsec flow steering (macsec_fs) and MACsec statistics (stats)
are maintained by the core driver, move their data as well to be saved
inside core structures instead of staying part of ethernet MACsec database.
In addition cleanup all MACsec stats functions from the ethernet MACsec
code and move what's needed to be part of macsec_fs instead.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
Given a macsec net_device add two functions to return the real net_device
for that device, and check if that macsec device is offloaded or not.
This is needed for auxiliary drivers that implement MACsec offload, but
have flows which are triggered over the macsec net_device, this allows
the drivers in such cases to verify if the device is offloaded or not,
and to access the real device of that macsec device, which would
belong to the driver, and would be needed for the offload procedure.
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Reviewed-by: Mark Zhang <markzhang@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some small tty and serial core fixes for 6.5-rc7 that resolve
a lot of reported issues.
Primarily in here are the fixes for the serial bus code from Tony that
came in -rc1, as it hit wider testing with the huge number of
different types of systems and serial ports. All of the reported
issues with duplicate names and other issues with this code are now
resolved.
Other than that included in here is:
- n_gsm fix for a previous fix
- 8250 lockdep annotation fix
- fsl_lpuart serial driver fix
- TIOCSTI documentation update for previous CAP_SYS_ADMIN change
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: core: Fix serial core port id, including multiport devices
serial: 8250: drop lockdep annotation from serial8250_clear_IER()
tty: n_gsm: fix the UAF caused by race condition in gsm_cleanup_mux
serial: core: Revert port_id use
TIOCSTI: Document CAP_SYS_ADMIN behaviour in Kconfig
serial: 8250: Fix oops for port->pm on uart_change_pm()
serial: 8250: Reinit port_id when adding back serial8250_isa_devs
serial: core: Fix kmemleak issue for serial core device remove
MAINTAINERS: Merge TTY layer and serial drivers
serial: core: Fix serial_base_match() after fixing controller port name
serial: core: Fix serial core controller port name to show controller id
serial: core: Fix serial core port id to not use port->line
serial: core: Controller id cannot be negative
tty: serial: fsl_lpuart: Clear the error flags by writing 1 for lpuart32 platforms
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev
Pull fbdev fixes and cleanups from Helge Deller:
- various code cleanups in amifb, atmel_lcdfb, ssd1307fb, kyro and
goldfishfb
* tag 'fbdev-for-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: goldfishfb: Do not check 0 for platform_get_irq()
fbdev: atmel_lcdfb: Remove redundant of_match_ptr()
fbdev: kyro: Remove unused declarations
fbdev: ssd1307fb: Print the PWM's label instead of its number
fbdev: mmp: fix value check in mmphw_probe()
fbdev: amifb: Replace zero-length arrays with DECLARE_FLEX_ARRAY() helper
|
|
skb_queue_purge() and __skb_queue_purge() become wrappers
around the new generic functions.
New SKB_DROP_REASON_QUEUE_PURGE drop reason is added,
but users can start adding more specific reasons.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add SMC_NLA_LGR_R_V2_MAX_CONNS and SMC_NLA_LGR_R_V2_MAX_LINKS
to SMCR v2 linkgroup netlink attribute SMC_NLA_LGR_R_V2 for
linkgroup's detail info showing.
Signed-off-by: Guangguan Wang <guangguan.wang@linux.alibaba.com>
Reviewed-by: Jan Karcher <jaka@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
*prot->memory_pressure is read/writen locklessly, we need
to add proper annotations.
A recent commit added a new race, it is time to audit all accesses.
Fixes: 2d0c88e84e48 ("sock: Fix misuse of sk_under_memory_pressure()")
Fixes: 4d93df0abd50 ("[SCTP]: Rewrite of sctp buffer management code")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Abel Wu <wuyun.abel@bytedance.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Link: https://lore.kernel.org/r/20230818015132.2699348-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The CS42L43 is an audio CODEC with integrated MIPI SoundWire interface
(Version 1.2.1 compliant), I2C, SPI, and I2S/TDM interfaces designed
for portable applications. It provides a high dynamic range, stereo
DAC for headphone output, two integrated Class D amplifiers for
loudspeakers, and two ADCs for wired headset microphone input or
stereo line input. PDM inputs are provided for digital microphones.
The ASoC component provides the majority of the functionality of the
device, all the audio functions.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230804104602.395892-7-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
virtchnl: fix fake 1-elem arrays
Alexander Lobakin says:
6.5-rc1 started spitting warning splats when composing virtchnl
messages, precisely on virtchnl_rss_key and virtchnl_lut:
[ 84.167709] memcpy: detected field-spanning write (size 52) of single
field "vrk->key" at drivers/net/ethernet/intel/iavf/iavf_virtchnl.c:1095
(size 1)
[ 84.169915] WARNING: CPU: 3 PID: 11 at drivers/net/ethernet/intel/
iavf/iavf_virtchnl.c:1095 iavf_set_rss_key+0x123/0x140 [iavf]
...
[ 84.191982] Call Trace:
[ 84.192439] <TASK>
[ 84.192900] ? __warn+0xc9/0x1a0
[ 84.193353] ? iavf_set_rss_key+0x123/0x140 [iavf]
[ 84.193818] ? report_bug+0x12c/0x1b0
[ 84.194266] ? handle_bug+0x42/0x70
[ 84.194714] ? exc_invalid_op+0x1a/0x50
[ 84.195149] ? asm_exc_invalid_op+0x1a/0x20
[ 84.195592] ? iavf_set_rss_key+0x123/0x140 [iavf]
[ 84.196033] iavf_watchdog_task+0xb0c/0xe00 [iavf]
...
[ 84.225476] memcpy: detected field-spanning write (size 64) of single
field "vrl->lut" at drivers/net/ethernet/intel/iavf/iavf_virtchnl.c:1127
(size 1)
[ 84.227190] WARNING: CPU: 27 PID: 1044 at drivers/net/ethernet/intel/
iavf/iavf_virtchnl.c:1127 iavf_set_rss_lut+0x123/0x140 [iavf]
...
[ 84.246601] Call Trace:
[ 84.247228] <TASK>
[ 84.247840] ? __warn+0xc9/0x1a0
[ 84.248263] ? iavf_set_rss_lut+0x123/0x140 [iavf]
[ 84.248698] ? report_bug+0x12c/0x1b0
[ 84.249122] ? handle_bug+0x42/0x70
[ 84.249549] ? exc_invalid_op+0x1a/0x50
[ 84.249970] ? asm_exc_invalid_op+0x1a/0x20
[ 84.250390] ? iavf_set_rss_lut+0x123/0x140 [iavf]
[ 84.250820] iavf_watchdog_task+0xb16/0xe00 [iavf]
Gustavo already tried to fix those back in 2021[0][1]. Unfortunately,
a VM can run a different kernel than the host, meaning that those
structures are sorta ABI.
However, it is possible to have proper flex arrays + struct_size()
calculations and still send the very same messages with the same sizes.
The common rule is:
elem[1] -> elem[]
size = struct_size() + <difference between the old and the new msg size>
The "old" size in the current code is calculated 3 different ways for
10 virtchnl structures total. Each commit addresses one of the ways
cumulatively instead of per-structure.
I was planning to send it to -net initially, but given that virtchnl was
renamed from i40evf and got some fat style cleanup commits in the past,
it's not very straightforward to even pick appropriate SHAs, not
speaking of automatic portability. I may send manual backports for
a couple of the latest supported kernels later on if anyone needs it
at all.
[0] https://lore.kernel.org/all/20210525230912.GA175802@embeddedor
[1] https://lore.kernel.org/all/20210525231851.GA176647@embeddedor
* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
virtchnl: fix fake 1-elem arrays for structures allocated as `nents`
virtchnl: fix fake 1-elem arrays in structures allocated as `nents + 1`
virtchnl: fix fake 1-elem arrays in structs allocated as `nents + 1` - 1
====================
Link: https://lore.kernel.org/r/20230816210657.1326772-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
This patch chain adds support for the Cirrus Logic cs42l43 PC focused
SoundWire CODEC.
|
|
Some configurations differ between chip variants, e,g. the register
to control the on of state of LDOA1 and SWB2. Thus, it is necessary
to choose the correct configuration for a dedicated device.
If the wrong configuration was used, the LDOA1 output that was
disabled by the bootloader was enabled in Kernel again.
Each chip variant gets its dedicated configuration selected by
the chip ID previously collected from MFD probe function.
The VTT enum value (tps65086_regulators) is shifted because not all
chip variants have a separate SWB2 switch. Sometimes they are merged.
So the configuration possibilities differ, thus the regulator
configuration arrays have a different length.
Signed-off-by: Andre Werner <andre.werner@systec-electronic.com>
Link: https://lore.kernel.org/r/20230818083721.29790-5-andre.werner@systec-electronic.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge Lee Jones' tag 'ib-mfd-regulator-v6.6' of
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
into 20230818204514.GA1380343@google.com so we can build the tps65086
support:
Immutable branch between MFD and Regulator due for the v6.6 merge window
|
|
commit 260a127bfbeb ("mfd: 88pm860x-i2c: Purge unused functions")
left behind this.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20230728132841.10648-1-yuehaibing@huawei.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
commit d28f1db8187d ("mfd: Remove confusing ab8500-i2c file and merge into ab8500-core")
left behind this.
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20230728132439.31568-1-yuehaibing@huawei.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
max77686_irq_init() and max77686_irq_exit() are not used since
commit 6f1c1e71d933 ("mfd: max77686: Convert to use regmap_irq").
And max77686_irq_resume() never be implemented since introduced in
commit dae8a969d512 ("mfd: Add Maxim 77686 driver").
Signed-off-by: Yue Haibing <yuehaibing@huawei.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/r/20230728132709.27052-1-yuehaibing@huawei.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The new set of drivers for RZ/G2L MTU3a tries to enable compile-testing the
individual client drivers even when the MFD portion is disabled but gets it
wrong, causing a link failure when the core is in a loadable module but the
other drivers are built-in:
x86_64-linux-ld: drivers/pwm/pwm-rz-mtu3.o: in function `rz_mtu3_pwm_apply':
pwm-rz-mtu3.c:(.text+0x4bf): undefined reference to `rz_mtu3_8bit_ch_write'
x86_64-linux-ld: pwm-rz-mtu3.c:(.text+0x509): undefined reference to `rz_mtu3_disable'
arm-linux-gnueabi-ld: drivers/counter/rz-mtu3-cnt.o: in function `rz_mtu3_cascade_counts_enable_get':
rz-mtu3-cnt.c:(.text+0xbec): undefined reference to `rz_mtu3_shared_reg_read'
It seems better not to add the extra complexity here but instead just use
a normal hard dependency, so remove the #else portion in the header along
with the "|| COMPILE_TEST". This could also be fixed by having slightly more
elaborate Kconfig dependencies or using the cursed 'IS_REACHABLE()' helper,
but in practice it's already possible to compile-test all these drivers
by enabling the mtd portion.
Fixes: 254d3a727421c ("pwm: Add Renesas RZ/G2L MTU3a PWM driver")
Fixes: 0be8907359df4 ("counter: Add Renesas RZ/G2L MTU3a counter driver")
Fixes: 654c293e1687b ("mfd: Add Renesas RZ/G2L MTU3a core driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230719090430.1925182-1-arnd@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Since commit b0e846248de5 ("mfd: db8500-prcmu: Remove dead code for a non-existing config")
these inline helpers also no need any more.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Link: https://lore.kernel.org/r/20230720143738.13996-1-yuehaibing@huawei.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Use devm_platform_ioremap_resource() to simplify code.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Link: https://lore.kernel.org/r/20230706113939.1178-7-frank.li@vivo.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
ibs-for-mfd-merged
Immutable branch between MFD, Pinctrl and soundwire due for the v6.6 merge window
Immutable branch between MFD and Regulator due for the v6.6 merge window
|
|
This commit prepares a following commit for the regulator part of the MFD.
The driver should support different device chips that differ in their
register definitions, for instance to control LDOA1 and SWB2.
So it is necessary to use a dedicated regulator description for a
specific device variant. Thus, the content from DEVICEID Register 1 is
used to choose a dedicated configuration between the different device
variants.
Signed-off-by: Andre Werner <andre.werner@systec-electronic.com>
Link: https://lore.kernel.org/r/20230818083721.29790-2-andre.werner@systec-electronic.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/sfc/tc.c
fa165e194997 ("sfc: don't unregister flow_indr if it was never registered")
3bf969e88ada ("sfc: add MAE table machinery for conntrack table")
https://lore.kernel.org/all/20230818112159.7430e9b4@canb.auug.org.au/
No adjacent changes.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The APIs that allow backtracing across CPUs have always had a way to
exclude the current CPU. This convenience means callers didn't need to
find a place to allocate a CPU mask just to handle the common case.
Let's extend the API to take a CPU ID to exclude instead of just a
boolean. This isn't any more complex for the API to handle and allows the
hardlockup detector to exclude a different CPU (the one it already did a
trace for) without needing to find space for a CPU mask.
Arguably, this new API also encourages safer behavior. Specifically if
the caller wants to avoid tracing the current CPU (maybe because they
already traced the current CPU) this makes it more obvious to the caller
that they need to make sure that the current CPU ID can't change.
[akpm@linux-foundation.org: fix trigger_allbutcpu_cpu_backtrace() stub]
Link: https://lkml.kernel.org/r/20230804065935.v4.1.Ia35521b91fc781368945161d7b28538f9996c182@changeid
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Lecopzer Chen <lecopzer.chen@mediatek.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Pingfan Liu <kernelfans@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
range.h works with struct range data type. The resource_size_t
is an alien here.
(1) Move cap_resource() implementation into its only user, and
(2) rename and move RESOURCE_SIZE_MAX to limits.h.
Link: https://lkml.kernel.org/r/20230804064636.15368-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: Alexander Sverdlin <alexander.sverdlin@nokia.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
