| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"Here is the crypto update for 4.15:
API:
- Disambiguate EBUSY when queueing crypto request by adding ENOSPC.
This change touches code outside the crypto API.
- Reset settings when empty string is written to rng_current.
Algorithms:
- Add OSCCA SM3 secure hash.
Drivers:
- Remove old mv_cesa driver (replaced by marvell/cesa).
- Enable rfc3686/ecb/cfb/ofb AES in crypto4xx.
- Add ccm/gcm AES in crypto4xx.
- Add support for BCM7278 in iproc-rng200.
- Add hash support on Exynos in s5p-sss.
- Fix fallback-induced error in vmx.
- Fix output IV in atmel-aes.
- Fix empty GCM hash in mediatek.
Others:
- Fix DoS potential in lib/mpi.
- Fix potential out-of-order issues with padata"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (162 commits)
lib/mpi: call cond_resched() from mpi_powm() loop
crypto: stm32/hash - Fix return issue on update
crypto: dh - Remove pointless checks for NULL 'p' and 'g'
crypto: qat - Clean up error handling in qat_dh_set_secret()
crypto: dh - Don't permit 'key' or 'g' size longer than 'p'
crypto: dh - Don't permit 'p' to be 0
crypto: dh - Fix double free of ctx->p
hwrng: iproc-rng200 - Add support for BCM7278
dt-bindings: rng: Document BCM7278 RNG200 compatible
crypto: chcr - Replace _manual_ swap with swap macro
crypto: marvell - Add a NULL entry at the end of mv_cesa_plat_id_table[]
hwrng: virtio - Virtio RNG devices need to be re-registered after suspend/resume
crypto: atmel - remove empty functions
crypto: ecdh - remove empty exit()
MAINTAINERS: update maintainer for qat
crypto: caam - remove unused param of ctx_map_to_sec4_sg()
crypto: caam - remove unneeded edesc zeroization
crypto: atmel-aes - Reset the controller before each use
crypto: atmel-aes - properly set IV after {en,de}crypt
hwrng: core - Reset user selected rng by writing "" to rng_current
...
|
|
* pci/host-tango:
PCI: tango: Add MSI controller support
PCI: Use of_pci_dma_range_parser_init() to reduce duplication
of/pci: Add of_pci_dma_range_parser_init() for dma-ranges parsing support
|
|
* pci/virtualization:
PCI: Document reset method return values
PCI: Detach driver before procfs & sysfs teardown on device remove
PCI: Apply Cavium ThunderX ACS quirk to more Root Ports
PCI: Set Cavium ACS capability quirk flags to assert RR/CR/SV/UF
PCI: Restore ARI Capable Hierarchy before setting numVFs
PCI: Create SR-IOV virtfn/physfn links before attaching driver
PCI: Expose SR-IOV offset, stride, and VF device ID via sysfs
PCI: Cache the VF device ID in the SR-IOV structure
PCI: Add Kconfig PCI_IOV dependency for PCI_REALLOC_ENABLE_AUTO
PCI: Remove unused function __pci_reset_function()
PCI: Remove reset argument from pci_iov_{add,remove}_virtfn()
|
|
* pci/resource:
PCI: Fail pci_map_rom() if the option ROM is invalid
PCI: Move pci_map_rom() error path
x86/PCI: Enable a 64bit BAR on AMD Family 15h (Models 00-1f, 30-3f, 60-7f)
PCI: Add pci_resize_resource() for resizing BARs
PCI: Add resizable BAR infrastructure
PCI: Add PCI resource type mask #define
|
|
* pci/msi:
PCI/portdrv: Compute MSI/MSI-X IRQ vectors after final allocation
PCI/portdrv: Factor out Interrupt Message Number lookup
PCI/portdrv: Consolidate comments
PCI/portdrv: Add #defines for AER and DPC Interrupt Message Number masks
|
|
* pci/hotplug:
PCI: pciehp: Do not clear Presence Detect Changed during initialization
PCI: pciehp: Fix race condition handling surprise link down
PCI: Distribute available resources to hotplug-capable bridges
PCI: Distribute available buses to hotplug-capable bridges
PCI: Do not allocate more buses than available in parent
PCI: Open-code the two pass loop when scanning bridges
PCI: Move pci_hp_add_bridge() to drivers/pci/probe.c
PCI: Add for_each_pci_bridge() helper
PCI: shpchp: Convert timers to use timer_setup()
PCI: cpqphp: Convert timers to use timer_setup()
PCI: pciehp: Convert timers to use timer_setup()
PCI: ibmphp: Use common error handling code in unconfigure_boot_device()
|
|
* clk-gpio:
clk: clk-gpio: Request GPIO descriptor as LOW
clk: clk-gpio: Make GPIO clock provider use descriptors only
|
|
* clk-mediatek:
clk: mediatek: add clock support for MT7622 SoC
clk: mediatek: add clocks dt-bindings required header for MT7622 SoC
clk: mediatek: add the option for determining PLL source clock
dt-bindings: clock: mediatek: document clk bindings for MediaTek MT7622 SoC
clk: mediatek: mark mtk_infrasys_init_early __init
clk: mediatek: Add MT2712 clock support
clk: mediatek: Add dt-bindings for MT2712 clocks
dt-bindings: ARM: Mediatek: Document bindings for MT2712
|
|
* clk-imx:
clk: imx: imx7d: Remove ARM_M0 clock
clk: imx: imx7d: Fix parent clock for OCRAM_CLK
clk: imx: clk-imx6ul: allow lcdif_pre_sel to change parent rate
clk: imx6: refine hdmi_isfr's parent to make HDMI work on i.MX6 SoCs w/o VPU
|
|
* clk-qcom:
clk: qcom: clk-smd-rpm: add msm8996 rpmclks
clk: qcom: Implement RPM clocks for MSM8660/APQ8060
clk: qcom: Update DT bindings for the MSM8660/APQ8060 RPMCC
clk: qcom: Elaborate on "active" clocks in the RPM clock bindings
clk: qcom: Remove unused RCG ops
|
|
* clk-at91:
clk: at91: utmi: set the mainck rate
|
|
* clk-devm-provider:
clk: qcom: common: Migrate to devm_* APIs for resets and clk providers
clk: Add devm_of_clk_add_hw_provider()/del_provider() APIs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into clk-next
Pull tegra clk drivers updates from Thierry Reding:
This contains cleanups and minor fixes for the Tegra clock driver.
* tag 'tegra-for-4.15-clk-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
clk: tegra: Use readl_relaxed_poll_timeout_atomic() in tegra210_clock_init()
clk: tegra: dfll: Fix drvdata overwriting issue
clk: tegra: Fix cclk_lp divisor register
clk: tegra: Bump SCLK clock rate to 216 MHz
clk: tegra: Use common definition of APBDMA clock gate
clk: tegra: Correct parent of the APBDMA clock
clk: tegra: Add AHB DMA clock entry
clk: tegra: Mark APB clock as critical
clk: tegra: Make tegra_clk_pll_params __ro_after_init
clk: tegra: Fix sor1_out clock implementation
clk: tegra: Use tegra_clk_register_periph_data()
clk: tegra: Add peripheral clock registration helper
clk: tegra: Check BPMP response return code
dt-bindings: clock: tegra: Add sor1_out clock
firmware: tegra: Propagate error code to caller
|
|
There are some conflicts between staging and media trees,
as reported by Stephen Rothwell <sfr@canb.auug.org.au>.
So, merge from staging.
* tag 'staging-4.15-rc1': (775 commits)
staging: lustre: add SPDX identifiers to all lustre files
staging: greybus: Remove redundant license text
staging: greybus: add SPDX identifiers to all greybus driver files
staging: ccree: simplify ioread/iowrite
staging: ccree: simplify registers access
staging: ccree: simplify error handling logic
staging: ccree: remove dead code
staging: ccree: handle limiting of DMA masks
staging: ccree: copy IV to DMAable memory
staging: fbtft: remove redundant initialization of buf
staging: sm750fb: Fix parameter mistake in poke32
staging: wilc1000: Fix bssid buffer offset in Txq
staging: fbtft: fb_ssd1331: fix mirrored display
staging: android: Fix checkpatch.pl error
staging: greybus: loopback: convert loopback to use generic async operations
staging: greybus: operation: add private data with get/set accessors
staging: greybus: loopback: Fix iteration count on async path
staging: greybus: loopback: Hold per-connection mutex across operations
staging: greybus/loopback: use ktime_get() for time intervals
staging: fsl-dpaa2/eth: Extra headroom in RX buffers
...
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
|
|
Add and use #defines for L1 Substate register fields instead of hard-coding
the masks. Also update comments to use names from the spec. No functional
change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Vidya Sagar <vidyas@nvidia.com>
|
|
Reformat register field definitions in the style used elsewhere and align
comments with names used in the spec. No functional change intended.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Vidya Sagar <vidyas@nvidia.com>
|
|
These flags are unused, remove them to be less confusing.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent
Pull irqchip updates for 4.15, take #4 from Marc Zyngier
- A core irq fix for legacy cases where the irq trigger is not reported
by firmware
- A couple of GICv3/4 fixes (Kconfig, of-node refcount, error handling)
- Trivial pr_err fixes
|
|
As of d4d1fc61eb38f (ia64: Update fsyscall gettime to use modern
vsyscall_update)the last user of CONFIG_GENERIC_TIME_VSYSCALL_OLD
have been updated, the legacy support for old-style vsyscall
implementations can be removed from the timekeeping code.
(Thanks again to Tony Luck for helping remove the last user!)
[jstultz: Commit message rework]
Signed-off-by: Miroslav Lichvar <mlichvar@redhat.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Stephen Boyd <stephen.boyd@linaro.org>
Link: https://lkml.kernel.org/r/1510613491-16695-1-git-send-email-john.stultz@linaro.org
|
|
Get upstream changes so dependent patches can be applied.
|
|
move tls_make_aad as it is going to be reused
by the device offload code and rx path.
Remove unused recv parameter.
Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Previously the TLS ulp context would leak if we attached a TLS ulp
to a socket but did not use the TLS_TX setsockopt,
or did use it but it failed.
This patch solves the issue by overriding prot[TLS_BASE_TX].close
and fixing tls_sk_proto_close to work properly
when its called with ctx->tx_conf == TLS_BASE_TX.
This patch also removes ctx->free_resources as we can use ctx->tx_conf
to obtain the relevant information.
Fixes: 3c4d7559159b ('tls: kernel TLS support')
Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The tx configuration is now stored in ctx->tx_conf.
And sk->sk_prot is updated trough a function
This will simplify things when we add rx
and support for different possible
tx and rx cross configurations.
Signed-off-by: Ilya Lesokhin <ilyal@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
I had many reports that TSQ logic breaks wifi aggregation.
Current logic is to allow up to 1 ms of bytes to be queued into qdisc
and drivers queues.
But Wifi aggregation needs a bigger budget to allow bigger rates to
be discovered by various TCP Congestion Controls algorithms.
This patch adds an extra socket field, allowing wifi drivers to select
another log scale to derive TCP Small Queue credit from current pacing
rate.
Initial value is 10, meaning that this patch does not change current
behavior.
We expect wifi drivers to set this field to smaller values (tests have
been done with values from 6 to 9)
They would have to use following template :
if (skb->sk && skb->sk->sk_pacing_shift != MY_PACING_SHIFT)
skb->sk->sk_pacing_shift = MY_PACING_SHIFT;
Ref: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1670041
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Toke Høiland-Jørgensen <toke@toke.dk>
Cc: Kir Kolyshkin <kir@openvz.org>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/PHY updates from Greg KH:
"Here is the big set of USB and PHY driver updates for 4.15-rc1.
There is the usual amount of gadget and xhci driver updates, along
with phy and chipidea enhancements. There's also a lot of SPDX tags
and license boilerplate cleanups as well, which provide some churn in
the diffstat.
Other major thing is the typec code that moved out of staging and into
the "real" part of the drivers/usb/ tree, which was nice to see
happen.
All of these have been in linux-next with no reported issues for a
while"
* tag 'usb-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (263 commits)
usb: gadget: f_fs: Fix use-after-free in ffs_free_inst
USB: usbfs: compute urb->actual_length for isochronous
usb: core: message: remember to reset 'ret' to 0 when necessary
USB: typec: Remove remaining redundant license text
USB: typec: add SPDX identifiers to some files
USB: renesas_usbhs: rcar?.h: add SPDX tags
USB: chipidea: ci_hdrc_tegra.c: add SPDX line
USB: host: xhci-debugfs: add SPDX lines
USB: add SPDX identifiers to all remaining Makefiles
usb: host: isp1362-hcd: remove a couple of redundant assignments
USB: adutux: remove redundant variable minor
usb: core: add a new usb_get_ptm_status() helper
usb: core: add a 'type' parameter to usb_get_status()
usb: core: introduce a new usb_get_std_status() helper
usb: core: rename usb_get_status() 'type' argument to 'recip'
usb: core: add Status Type definitions
USB: gadget: Remove redundant license text
USB: gadget: function: Remove redundant license text
USB: gadget: udc: Remove redundant license text
USB: gadget: legacy: Remove redundant license text
...
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial updates from Greg KH:
"Here is the big tty/serial driver pull request for 4.15-rc1.
Lots of serial driver updates in here, some small vt cleanups, and a
raft of SPDX and license boilerplate cleanups, messing up the diffstat
a bit.
Nothing major, with no realy functional changes except better hardware
support for some platforms.
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (110 commits)
tty: ehv_bytechan: fix spelling mistake
tty: serial: meson: allow baud-rates lower than 9600
serial: 8250_fintek: Fix crash with baud rate B0
serial: 8250_fintek: Disable delays for ports != 0
serial: 8250_fintek: Return -EINVAL on invalid configuration
tty: Remove redundant license text
tty: serdev: Remove redundant license text
tty: hvc: Remove redundant license text
tty: serial: Remove redundant license text
tty: add SPDX identifiers to all remaining files in drivers/tty/
tty: serial: jsm: remove redundant pointer ts
tty: serial: jsm: add space before the open parenthesis '('
tty: serial: jsm: fix coding style
tty: serial: jsm: delete space between function name and '('
tty: serial: jsm: add blank line after declarations
tty: serial: jsm: change the type of local variable
tty: serial: imx: remove dead code imx_dma_rxint
tty: serial: imx: disable ageing timer interrupt if dma in use
serial: 8250: fix potential deadlock in rs485-mode
serial: m32r_sio: Drop redundant .data assignment
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging and IIO updates from Greg KH:
"Here is the "big" staging and IIO driver update for 4.15-rc1.
Lots and lots of little changes, almost all minor code cleanups as the
Outreachy application process happened during this development cycle.
Also happened was a lot of IIO driver activity, and the typec USB code
moving out of staging to drivers/usb (same commits are in the USB tree
on a persistent branch to not cause merge issues.)
Overall, it's a wash, I think we added a few hundred more lines than
removed, but really only a few thousand were modified at all.
All of these have been in linux-next for a while. There might be a
merge issue with Al's vfs tree in the pi433 driver (take his changes,
they are always better), and the media tree with some of the odd
atomisp cleanups (take the media tree's version)"
* tag 'staging-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (507 commits)
staging: lustre: add SPDX identifiers to all lustre files
staging: greybus: Remove redundant license text
staging: greybus: add SPDX identifiers to all greybus driver files
staging: ccree: simplify ioread/iowrite
staging: ccree: simplify registers access
staging: ccree: simplify error handling logic
staging: ccree: remove dead code
staging: ccree: handle limiting of DMA masks
staging: ccree: copy IV to DMAable memory
staging: fbtft: remove redundant initialization of buf
staging: sm750fb: Fix parameter mistake in poke32
staging: wilc1000: Fix bssid buffer offset in Txq
staging: fbtft: fb_ssd1331: fix mirrored display
staging: android: Fix checkpatch.pl error
staging: greybus: loopback: convert loopback to use generic async operations
staging: greybus: operation: add private data with get/set accessors
staging: greybus: loopback: Fix iteration count on async path
staging: greybus: loopback: Hold per-connection mutex across operations
staging: greybus/loopback: use ktime_get() for time intervals
staging: fsl-dpaa2/eth: Extra headroom in RX buffers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull device properties framework updates from Rafael Wysocki:
"These make the fwnode_handle_get() function return a pointer to the
target fwnode object, which reflects the of_node_get() behavior, and
add a macro for iterating over graph endpoints (Sakari Ailus)"
* tag 'devprop-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
device property: Add a macro for interating over graph endpoints
device property: Make fwnode_handle_get() return the fwnode
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These update ACPICA to upstream revision 20170831, fix APEI to use the
fixmap instead of ioremap_page_range(), add an operation region driver
for TI PMIC TPS68470, add support for PCC subspace IDs to the ACPI
CPPC driver, fix a few assorted issues and clean up some code.
Specifics:
- Update the ACPICA code to upstream revision 20170831 including
* PDTT table header support (Bob Moore).
* Cleanup and extension of internal string-to-integer conversion
functions (Bob Moore).
* Support for 64-bit hardware accesses (Lv Zheng).
* ACPI PM Timer code adjustment to deal with 64-bit return values
of acpi_hw_read() (Bob Moore).
* Support for deferred table verification in acpiexec (Lv Zheng).
- Fix APEI to use the fixmap instead of ioremap_page_range() which
cannot work correctly the way the code in there attempted to use it
and drop some code that's not necessary any more after that change
(James Morse).
- Clean up the APEI support code and make it use 64-bit timestamps
(Arnd Bergmann, Dongjiu Geng, Jan Beulich).
- Add operation region driver for TI PMIC TPS68470 (Rajmohan Mani).
- Add support for PCC subspace IDs to the ACPI CPPC driver (George
Cherian).
- Fix an ACPI EC driver regression related to the handling of EC
events during the "noirq" phases of system suspend/resume (Lv
Zheng).
- Delay the initialization of the lid state in the ACPI button driver
to fix issues appearing on some systems (Hans de Goede).
- Extend the KIOX000A "device always present" quirk to cover all
affected BIOS versions (Hans de Goede).
- Clean up some code in the ACPI core and drivers (Colin Ian King,
Gustavo Silva)"
* tag 'acpi-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (24 commits)
ACPI: Mark expected switch fall-throughs
ACPI / LPSS: Remove redundant initialization of clk
ACPI / CPPC: Make CPPC ACPI driver aware of PCC subspace IDs
mailbox: PCC: Move the MAX_PCC_SUBSPACES definition to header file
ACPI / sysfs: Make function param_set_trace_method_name() static
ACPI / button: Delay acpi_lid_initialize_state() until first user space open
ACPI / EC: Fix regression related to triggering source of EC event handling
APEI / ERST: use 64-bit timestamps
ACPI / APEI: Remove arch_apei_flush_tlb_one()
arm64: mm: Remove arch_apei_flush_tlb_one()
ACPI / APEI: Remove ghes_ioremap_area
ACPI / APEI: Replace ioremap_page_range() with fixmap
ACPI / APEI: remove the unused dead-code for SEA/NMI notification type
ACPI / x86: Extend KIOX000A quirk to cover all affected BIOS versions
ACPI / APEI: adjust a local variable type in ghes_ioremap_pfn_irq()
ACPICA: Update version to 20170831
ACPICA: Update acpi_get_timer for 64-bit interface to acpi_hw_read
ACPICA: String conversions: Update to add new behaviors
ACPICA: String conversions: Cleanup/format comments. No functional changes
ACPICA: Restructure/cleanup all string-to-integer conversion functions
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"There are no real big ticket items here this time.
The most noticeable change is probably the relocation of the OPP
(Operating Performance Points) framework to its own directory under
drivers/ as it has grown big enough for that. Also Viresh is now going
to maintain it and send pull requests for it to me, so you will see
this change in the git history going forward (but still not right
now).
Another noticeable set of changes is the modifications of the PM core,
the PCI subsystem and the ACPI PM domain to allow of more integration
between system-wide suspend/resume and runtime PM. For now it's just a
way to avoid resuming devices from runtime suspend unnecessarily
during system suspend (if the driver sets a flag to indicate its
readiness for that) and in the works is an analogous mechanism to
allow devices to stay suspended after system resume.
In addition to that, we have some changes related to supporting
frequency-invariant CPU utilization metrics in the scheduler and in
the schedutil cpufreq governor on ARM and changes to add support for
device performance states to the generic power domains (genpd)
framework.
The rest is mostly fixes and cleanups of various sorts.
Specifics:
- Relocate the OPP (Operating Performance Points) framework to its
own directory under drivers/ and add support for power domain
performance states to it (Viresh Kumar).
- Modify the PM core, the PCI bus type and the ACPI PM domain to
support power management driver flags allowing device drivers to
specify their capabilities and preferences regarding the handling
of devices with enabled runtime PM during system suspend/resume and
clean up that code somewhat (Rafael Wysocki, Ulf Hansson).
- Add frequency-invariant accounting support to the task scheduler on
ARM and ARM64 (Dietmar Eggemann).
- Fix PM QoS device resume latency framework to prevent "no
restriction" requests from overriding requests with specific
requirements and drop the confusing PM_QOS_FLAG_REMOTE_WAKEUP
device PM QoS flag (Rafael Wysocki).
- Drop legacy class suspend/resume operations from the PM core and
drop legacy bus type suspend and resume callbacks from ARM/locomo
(Rafael Wysocki).
- Add min/max frequency support to devfreq and clean it up somewhat
(Chanwoo Choi).
- Rework wakeup support in the generic power domains (genpd)
framework and update some of its users accordingly (Geert
Uytterhoeven).
- Convert timers in the PM core to use timer_setup() (Kees Cook).
- Add support for exposing the SLP_S0 (Low Power S0 Idle) residency
counter based on the LPIT ACPI table on Intel platforms (Srinivas
Pandruvada).
- Add per-CPU PM QoS resume latency support to the ladder cpuidle
governor (Ramesh Thomas).
- Fix a deadlock between the wakeup notify handler and the notifier
removal in the ACPI core (Ville Syrjälä).
- Fix a cpufreq schedutil governor issue causing it to use stale
cached frequency values sometimes (Viresh Kumar).
- Fix an issue in the system suspend core support code causing wakeup
events detection to fail in some cases (Rajat Jain).
- Fix the generic power domains (genpd) framework to prevent the PM
core from using the direct-complete optimization with it as that is
guaranteed to fail (Ulf Hansson).
- Fix a minor issue in the cpuidle core and clean it up a bit (Gaurav
Jindal, Nicholas Piggin).
- Fix and clean up the intel_idle and ARM cpuidle drivers (Jason
Baron, Len Brown, Leo Yan).
- Fix a couple of minor issues in the OPP framework and clean it up
(Arvind Yadav, Fabio Estevam, Sudeep Holla, Tobias Jordan).
- Fix and clean up some cpufreq drivers and fix a minor issue in the
cpufreq statistics code (Arvind Yadav, Bhumika Goyal, Fabio
Estevam, Gautham Shenoy, Gustavo Silva, Marek Szyprowski, Masahiro
Yamada, Robert Jarzmik, Zumeng Chen).
- Fix minor issues in the system suspend and hibernation core, in
power management documentation and in the AVS (Adaptive Voltage
Scaling) framework (Helge Deller, Himanshu Jha, Joe Perches, Rafael
Wysocki).
- Fix some issues in the cpupower utility and document that Shuah
Khan is going to maintain it going forward (Prarit Bhargava, Shuah
Khan)"
* tag 'pm-4.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (88 commits)
tools/power/cpupower: add libcpupower.so.0.0.1 to .gitignore
tools/power/cpupower: Add 64 bit library detection
intel_idle: Graceful probe failure when MWAIT is disabled
cpufreq: schedutil: Reset cached_raw_freq when not in sync with next_freq
freezer: Fix typo in freezable_schedule_timeout() comment
PM / s2idle: Clear the events_check_enabled flag
cpufreq: stats: Handle the case when trans_table goes beyond PAGE_SIZE
cpufreq: arm_big_little: make cpufreq_arm_bL_ops structures const
cpufreq: arm_big_little: make function arguments and structure pointer const
cpuidle: Avoid assignment in if () argument
cpuidle: Clean up cpuidle_enable_device() error handling a bit
ACPI / PM: Fix acpi_pm_notifier_lock vs flush_workqueue() deadlock
PM / Domains: Fix genpd to deal with drivers returning 1 from ->prepare()
cpuidle: ladder: Add per CPU PM QoS resume latency support
PM / QoS: Fix device resume latency framework
PM / domains: Rework governor code to be more consistent
PM / Domains: Remove gpd_dev_ops.active_wakeup() callback
soc: rockchip: power-domain: Use GENPD_FLAG_ACTIVE_WAKEUP
soc: mediatek: Use GENPD_FLAG_ACTIVE_WAKEUP
ARM: shmobile: pm-rmobile: Use GENPD_FLAG_ACTIVE_WAKEUP
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull smp/hotplug updates from Thomas Gleixner:
"No functional changes, just removal of obsolete and outdated defines,
macros and documentation"
* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu/hotplug: Get rid of CPU hotplug notifier leftovers
cpu/hotplug: Remove obsolete notifier macros
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Yet another big pile of changes:
- More year 2038 work from Arnd slowly reaching the point where we
need to think about the syscalls themself.
- A new timer function which allows to conditionally (re)arm a timer
only when it's either not running or the new expiry time is sooner
than the armed expiry time. This allows to use a single timer for
multiple timeout requirements w/o caring about the first expiry
time at the call site.
- A new NMI safe accessor to clock real time for the printk timestamp
work. Can be used by tracing, perf as well if required.
- A large number of timer setup conversions from Kees which got
collected here because either maintainers requested so or they
simply got ignored. As Kees pointed out already there are a few
trivial merge conflicts and some redundant commits which was
unavoidable due to the size of this conversion effort.
- Avoid a redundant iteration in the timer wheel softirq processing.
- Provide a mechanism to treat RTC implementations depending on their
hardware properties, i.e. don't inflict the write at the 0.5
seconds boundary which originates from the PC CMOS RTC to all RTCs.
No functional change as drivers need to be updated separately.
- The usual small updates to core code clocksource drivers. Nothing
really exciting"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (111 commits)
timers: Add a function to start/reduce a timer
pstore: Use ktime_get_real_fast_ns() instead of __getnstimeofday()
timer: Prepare to change all DEFINE_TIMER() callbacks
netfilter: ipvs: Convert timers to use timer_setup()
scsi: qla2xxx: Convert timers to use timer_setup()
block/aoe: discover_timer: Convert timers to use timer_setup()
ide: Convert timers to use timer_setup()
drbd: Convert timers to use timer_setup()
mailbox: Convert timers to use timer_setup()
crypto: Convert timers to use timer_setup()
drivers/pcmcia: omap1: Fix error in automated timer conversion
ARM: footbridge: Fix typo in timer conversion
drivers/sgi-xp: Convert timers to use timer_setup()
drivers/pcmcia: Convert timers to use timer_setup()
drivers/memstick: Convert timers to use timer_setup()
drivers/macintosh: Convert timers to use timer_setup()
hwrng/xgene-rng: Convert timers to use timer_setup()
auxdisplay: Convert timers to use timer_setup()
sparc/led: Convert timers to use timer_setup()
mips: ip22/32: Convert timers to use timer_setup()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq core updates from Thomas Gleixner:
"A rather large update for the interrupt core code and the irq chip drivers:
- Add a new bitmap matrix allocator and supporting changes, which is
used to replace the x86 vector allocator which comes with separate
pull request. This allows to replace the convoluted nested loop
allocation function in x86 with a facility which supports the
recently added property of managed interrupts proper and allows to
switch to a best effort vector reservation scheme, which addresses
problems with vector exhaustion.
- A large update to the ARM GIC-V3-ITS driver adding support for
range selectors.
- New interrupt controllers:
- Meson and Meson8 GPIO
- BCM7271 L2
- Socionext EXIU
If you expected that this will stop at some point, I have to
disappoint you. There are new ones posted already. Sigh!
- STM32 interrupt controller support for new platforms.
- A pile of fixes, cleanups and updates to the MIPS GIC driver
- The usual small fixes, cleanups and updates all over the place.
Most visible one is to move the irq chip drivers Kconfig switches
into a separate Kconfig menu"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits)
genirq: Fix type of shifting literal 1 in __setup_irq()
irqdomain: Drop pointless NULL check in virq_debug_show_one
genirq/proc: Return proper error code when irq_set_affinity() fails
irq/work: Use llist_for_each_entry_safe
irqchip: mips-gic: Print warning if inherited GIC base is used
irqchip/mips-gic: Add pr_fmt and reword pr_* messages
irqchip/stm32: Move the wakeup on interrupt mask
irqchip/stm32: Fix initial values
irqchip/stm32: Add stm32h7 support
dt-bindings/interrupt-controllers: Add compatible string for stm32h7
irqchip/stm32: Add multi-bank management
irqchip/stm32: Select GENERIC_IRQ_CHIP
irqchip/exiu: Add support for Socionext Synquacer EXIU controller
dt-bindings: Add description of Socionext EXIU interrupt controller
irqchip/gic-v3-its: Fix VPE activate callback return value
irqchip: mips-gic: Make IPI bitmaps static
irqchip: mips-gic: Share register writes in gic_set_type()
irqchip: mips-gic: Remove gic_vpes variable
irqchip: mips-gic: Use num_possible_cpus() to reserve IPIs
irqchip: mips-gic: Configure EIC when CPUs come online
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 platform updates from Ingo Molnar:
"The main changes in this cycle were:
- a refactoring of the early virt init code by merging 'struct
x86_hyper' into 'struct x86_platform' and 'struct x86_init', which
allows simplifications and also the addition of a new
->guest_late_init() callback. (Juergen Gross)
- timer_setup() conversion of the UV code (Kees Cook)"
* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/virt/xen: Use guest_late_init to detect Xen PVH guest
x86/virt, x86/platform: Add ->guest_late_init() callback to hypervisor_x86 structure
x86/virt, x86/acpi: Add test for ACPI_FADT_NO_VGA
x86/virt: Add enum for hypervisors to replace x86_hyper
x86/virt, x86/platform: Merge 'struct x86_hyper' into 'struct x86_platform' and 'struct x86_init'
x86/platform/UV: Convert timers to use timer_setup()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 core updates from Ingo Molnar:
"Note that in this cycle most of the x86 topics interacted at a level
that caused them to be merged into tip:x86/asm - but this should be a
temporary phenomenon, hopefully we'll back to the usual patterns in
the next merge window.
The main changes in this cycle were:
Hardware enablement:
- Add support for the Intel UMIP (User Mode Instruction Prevention)
CPU feature. This is a security feature that disables certain
instructions such as SGDT, SLDT, SIDT, SMSW and STR. (Ricardo Neri)
[ Note that this is disabled by default for now, there are some
smaller enhancements in the pipeline that I'll follow up with in
the next 1-2 days, which allows this to be enabled by default.]
- Add support for the AMD SEV (Secure Encrypted Virtualization) CPU
feature, on top of SME (Secure Memory Encryption) support that was
added in v4.14. (Tom Lendacky, Brijesh Singh)
- Enable new SSE/AVX/AVX512 CPU features: AVX512_VBMI2, GFNI, VAES,
VPCLMULQDQ, AVX512_VNNI, AVX512_BITALG. (Gayatri Kammela)
Other changes:
- A big series of entry code simplifications and enhancements (Andy
Lutomirski)
- Make the ORC unwinder default on x86 and various objtool
enhancements. (Josh Poimboeuf)
- 5-level paging enhancements (Kirill A. Shutemov)
- Micro-optimize the entry code a bit (Borislav Petkov)
- Improve the handling of interdependent CPU features in the early
FPU init code (Andi Kleen)
- Build system enhancements (Changbin Du, Masahiro Yamada)
- ... plus misc enhancements, fixes and cleanups"
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (118 commits)
x86/build: Make the boot image generation less verbose
selftests/x86: Add tests for the STR and SLDT instructions
selftests/x86: Add tests for User-Mode Instruction Prevention
x86/traps: Fix up general protection faults caused by UMIP
x86/umip: Enable User-Mode Instruction Prevention at runtime
x86/umip: Force a page fault when unable to copy emulated result to user
x86/umip: Add emulation code for UMIP instructions
x86/cpufeature: Add User-Mode Instruction Prevention definitions
x86/insn-eval: Add support to resolve 16-bit address encodings
x86/insn-eval: Handle 32-bit address encodings in virtual-8086 mode
x86/insn-eval: Add wrapper function for 32 and 64-bit addresses
x86/insn-eval: Add support to resolve 32-bit address encodings
x86/insn-eval: Compute linear address in several utility functions
resource: Fix resource_size.cocci warnings
X86/KVM: Clear encryption attribute when SEV is active
X86/KVM: Decrypt shared per-cpu variables when SEV is active
percpu: Introduce DEFINE_PER_CPU_DECRYPTED
x86: Add support for changing memory encryption attribute in early boot
x86/io: Unroll string I/O when SEV is active
x86/boot: Add early boot support when running with SEV active
...
|
|
Current ib_modify_cq() is used to set CQ moderation parameters.
This patch renames ib_modify_cq() to be rdma_set_cq_moderation(),
because the kernel version of RDMA API doesn't need to follow already
exposed to user's API pattern (create_XXX/modify_XXX/query_XXX/destroy_XXX)
and better to have more accurate name which describes the actual usage.
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The query_device function can now obtain the maximum values for
cq_max_count and cq_period, needed for CQ moderation.
cq_max_count is a 16 bits number that determines the number
of CQEs to accumulate before generating an event.
cq_period is a 16 bits number that determines the timeout in micro
seconds from the last event generated, upon which a new event will
be generated even if cq_max_count was not reached.
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Exposed mlx5_ib_modify_cq to be called from ib device
verb list.
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Exposed mlx4_ib_modify_cq to be called from ib device
verb list.
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Uverbs support in modify_cq for CQ moderation only.
Gives ability to change cq_max_count and cq_period.
CQ moderation enhance performance by moderating the number
of CQEs needed to create an event instead of application
having to suffer from event per-CQE.
To achieve CQ moderation the application needs to set cq_max_count
and cq_period.
cq_max_count - defines the number of CQEs needed to create an event.
cq_period - defines the timeout (micro seconds) between last
event and a new one that will occur even if
cq_max_count was not satisfied
Signed-off-by: Yonatan Cohen <yonatanc@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"The main updates in this cycle were:
- Group balancing enhancements and cleanups (Brendan Jackman)
- Move CPU isolation related functionality into its separate
kernel/sched/isolation.c file, with related 'housekeeping_*()'
namespace and nomenclature et al. (Frederic Weisbecker)
- Improve the interactive/cpu-intense fairness calculation (Josef
Bacik)
- Improve the PELT code and related cleanups (Peter Zijlstra)
- Improve the logic of pick_next_task_fair() (Uladzislau Rezki)
- Improve the RT IPI based balancing logic (Steven Rostedt)
- Various micro-optimizations:
- better !CONFIG_SCHED_DEBUG optimizations (Patrick Bellasi)
- better idle loop (Cheng Jian)
- ... plus misc fixes, cleanups and updates"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
sched/core: Optimize sched_feat() for !CONFIG_SCHED_DEBUG builds
sched/sysctl: Fix attributes of some extern declarations
sched/isolation: Document isolcpus= boot parameter flags, mark it deprecated
sched/isolation: Add basic isolcpus flags
sched/isolation: Move isolcpus= handling to the housekeeping code
sched/isolation: Handle the nohz_full= parameter
sched/isolation: Introduce housekeeping flags
sched/isolation: Split out new CONFIG_CPU_ISOLATION=y config from CONFIG_NO_HZ_FULL
sched/isolation: Rename is_housekeeping_cpu() to housekeeping_cpu()
sched/isolation: Use its own static key
sched/isolation: Make the housekeeping cpumask private
sched/isolation: Provide a dynamic off-case to housekeeping_any_cpu()
sched/isolation, watchdog: Use housekeeping_cpumask() instead of ad-hoc version
sched/isolation: Move housekeeping related code to its own file
sched/idle: Micro-optimize the idle loop
sched/isolcpus: Fix "isolcpus=" boot parameter handling when !CONFIG_CPUMASK_OFFSTACK
x86/tsc: Append the 'tsc=' description for the 'tsc=unstable' boot parameter
sched/rt: Simplify the IPI based RT balancing logic
block/ioprio: Use a helper to check for RT prio
sched/rt: Add a helper to test for a RT task
...
|
|
Function returns zero - make it void.
While there make struct net_device const.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Add the required functions needed to support SRQs. Currently, kernel
clients are not supported. SRQs will only be available in userspace.
Reviewed-by: Adit Ranadive <aditr@vmware.com>
Reviewed-by: Aditya Sarwade <asarwade@vmware.com>
Reviewed-by: Jorgen Hansen <jhansen@vmware.com>
Reviewed-by: Nitish Bhat <bnitish@vmware.com>
Signed-off-by: Bryan Tan <bryantan@vmware.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
"The main changes in this cycle were:
Kernel:
- kprobes updates: use better W^X patterns for code modifications,
improve optprobes, remove jprobes. (Masami Hiramatsu, Kees Cook)
- core fixes: event timekeeping (enabled/running times statistics)
fixes, perf_event_read() locking fixes and cleanups, etc. (Peter
Zijlstra)
- Extend x86 Intel free-running PEBS support and support x86
user-register sampling in perf record and perf script. (Andi Kleen)
Tooling:
- Completely rework the way inline frames are handled. Instead of
querying for the inline nodes on-demand in the individual tools, we
now create proper callchain nodes for inlined frames. (Milian
Wolff)
- 'perf trace' updates (Arnaldo Carvalho de Melo)
- Implement a way to print formatted output to per-event files in
'perf script' to facilitate generate flamegraphs, elliminating the
need to write scripts to do that separation (yuzhoujian, Arnaldo
Carvalho de Melo)
- Update vendor events JSON metrics for Intel's Broadwell, Broadwell
Server, Haswell, Haswell Server, IvyBridge, IvyTown, JakeTown,
Sandy Bridge, Skylake, SkyLake Server - and Goldmont Plus V1 (Andi
Kleen, Kan Liang)
- Multithread the synthesizing of PERF_RECORD_ events for
pre-existing threads in 'perf top', speeding up that phase, greatly
improving the user experience in systems such as Intel's Knights
Mill (Kan Liang)
- Introduce the concept of weak groups in 'perf stat': try to set up
a group, but if it's not schedulable fallback to not using a group.
That gives us the best of both worlds: groups if they work, but
still a usable fallback if they don't. E.g: (Andi Kleen)
- perf sched timehist enhancements (David Ahern)
- ... various other enhancements, updates, cleanups and fixes"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (139 commits)
kprobes: Don't spam the build log with deprecation warnings
arm/kprobes: Remove jprobe test case
arm/kprobes: Fix kretprobe test to check correct counter
perf srcline: Show correct function name for srcline of callchains
perf srcline: Fix memory leak in addr2inlines()
perf trace beauty kcmp: Beautify arguments
perf trace beauty: Implement pid_fd beautifier
tools include uapi: Grab a copy of linux/kcmp.h
perf callchain: Fix double mapping al->addr for children without self period
perf stat: Make --per-thread update shadow stats to show metrics
perf stat: Move the shadow stats scale computation in perf_stat__update_shadow_stats
perf tools: Add perf_data_file__write function
perf tools: Add struct perf_data_file
perf tools: Rename struct perf_data_file to perf_data
perf script: Print information about per-event-dump files
perf trace beauty prctl: Generate 'option' string table from kernel headers
tools include uapi: Grab a copy of linux/prctl.h
perf script: Allow creating per-event dump files
perf evsel: Restore evsel->priv as a tool private area
perf script: Use event_format__fprintf()
...
|
|
It is now unused.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Reviewed-by: Richard Weinberger <richard@nod.at>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Tested-by: Chris Brandt <chris.brandt@renesas.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull core locking updates from Ingo Molnar:
"The main changes in this cycle are:
- Another attempt at enabling cross-release lockdep dependency
tracking (automatically part of CONFIG_PROVE_LOCKING=y), this time
with better performance and fewer false positives. (Byungchul Park)
- Introduce lockdep_assert_irqs_enabled()/disabled() and convert
open-coded equivalents to lockdep variants. (Frederic Weisbecker)
- Add down_read_killable() and use it in the VFS's iterate_dir()
method. (Kirill Tkhai)
- Convert remaining uses of ACCESS_ONCE() to
READ_ONCE()/WRITE_ONCE(). Most of the conversion was Coccinelle
driven. (Mark Rutland, Paul E. McKenney)
- Get rid of lockless_dereference(), by strengthening Alpha atomics,
strengthening READ_ONCE() with smp_read_barrier_depends() and thus
being able to convert users of lockless_dereference() to
READ_ONCE(). (Will Deacon)
- Various micro-optimizations:
- better PV qspinlocks (Waiman Long),
- better x86 barriers (Michael S. Tsirkin)
- better x86 refcounts (Kees Cook)
- ... plus other fixes and enhancements. (Borislav Petkov, Juergen
Gross, Miguel Bernal Marin)"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (70 commits)
locking/x86: Use LOCK ADD for smp_mb() instead of MFENCE
rcu: Use lockdep to assert IRQs are disabled/enabled
netpoll: Use lockdep to assert IRQs are disabled/enabled
timers/posix-cpu-timers: Use lockdep to assert IRQs are disabled/enabled
sched/clock, sched/cputime: Use lockdep to assert IRQs are disabled/enabled
irq_work: Use lockdep to assert IRQs are disabled/enabled
irq/timings: Use lockdep to assert IRQs are disabled/enabled
perf/core: Use lockdep to assert IRQs are disabled/enabled
x86: Use lockdep to assert IRQs are disabled/enabled
smp/core: Use lockdep to assert IRQs are disabled/enabled
timers/hrtimer: Use lockdep to assert IRQs are disabled/enabled
timers/nohz: Use lockdep to assert IRQs are disabled/enabled
workqueue: Use lockdep to assert IRQs are disabled/enabled
irq/softirqs: Use lockdep to assert IRQs are disabled/enabled
locking/lockdep: Add IRQs disabled/enabled assertion APIs: lockdep_assert_irqs_enabled()/disabled()
locking/pvqspinlock: Implement hybrid PV queued/unfair locks
locking/rwlocks: Fix comments
x86/paravirt: Set up the virt_spin_lock_key after static keys get initialized
block, locking/lockdep: Assign a lock_class per gendisk used for wait_for_completion()
workqueue: Remove now redundant lock acquisitions wrt. workqueue flushes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
"The main changes in this cycle are:
- Documentation updates
- RCU CPU stall-warning updates
- Torture-test updates
- Miscellaneous fixes
Size wise the biggest updates are to documentation. Excluding
documentation most of the code increase comes from a single commit
which expands debugging"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
srcu: Add parameters to SRCU docbook comments
doc: Rewrite confusing statement about memory barriers
memory-barriers.txt: Fix typo in pairing example
rcu/segcblist: Include rcupdate.h
rcu: Add extended-quiescent-state testing advice
rcu: Suppress lockdep false-positive ->boost_mtx complaints
rcu: Do not include rtmutex_common.h unconditionally
torture: Provide TMPDIR environment variable to specify tmpdir
rcutorture: Dump writer stack if stalled
rcutorture: Add interrupt-disable capability to stall-warning tests
rcu: Suppress RCU CPU stall warnings while dumping trace
rcu: Turn off tracing before dumping trace
rcu: Make RCU CPU stall warnings check for irq-disabled CPUs
sched,rcu: Make cond_resched() provide RCU quiescent state
sched: Make resched_cpu() unconditional
irq_work: Map irq_work_on_queue() to irq_work_on() in !SMP
rcu: Create call_rcu_tasks() kthread at boot time
rcu: Fix up pending cbs check in rcu_prepare_for_idle
memory-barriers: Rework multicopy-atomicity section
memory-barriers: Replace uses of "transitive"
...
|
|
git://people.freedesktop.org/~agd5f/linux into drm-next
This is a shared tree between drm and audio for some amd bits.
* 'linus-4.14-rc4-acp-prereq' of git://people.freedesktop.org/~agd5f/linux:
drm/amdgpu Moving amdgpu asic types to a separate file
ASoC: AMD: Added asic_type as ACP DMA driver platform data
drm/amd/amdgpu: Added asic_type as ACP DMA driver platform data
|
