| Age | Commit message (Collapse) | Author |
|---|
|
The commit a76caf55e5b35 ("thermal: Add devfreq cooling") is able
to disable OPP as a cooling device. In result, both update_devfreq()
and {min|max}_freq_show() have to consider the 'opp->available'
status of each OPP.
So, this patch adds the 'scaling_{min|max}_freq' to struct devfreq
in order to indicate the available mininum and maximum frequency
by adjusting OPP interface such as dev_pm_opp_{disable|enable}().
The 'scaling_{min|max}_freq' are used for on both update_devfreq()
and {min|max}_freq_show().
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
|
|
Previously, tc with ets type and zero bandwidth is not accepted
by driver. This behavior does not follow the IEEE802.1qaz spec.
If there are tcs with ets type and zero bandwidth, these tcs are
assigned to the lowest priority tc_group #0. We equally distribute
100% bw of the tc_group #0 to these zero bandwidth ets tcs.
Also, the non zero bandwidth ets tcs are assigned to tc_group #1.
If there is no zero bandwidth ets tc, the non zero bandwidth ets tcs
are assigned to tc_group #0.
Fixes: cdcf11212b22 ("net/mlx5e: Validate BW weight values of ETS")
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
|
|
wait_for_completion()
Darrick posted the following warning and Dave Chinner analyzed it:
> ======================================================
> WARNING: possible circular locking dependency detected
> 4.14.0-rc1-fixes #1 Tainted: G W
> ------------------------------------------------------
> loop0/31693 is trying to acquire lock:
> (&(&ip->i_mmaplock)->mr_lock){++++}, at: [<ffffffffa00f1b0c>] xfs_ilock+0x23c/0x330 [xfs]
>
> but now in release context of a crosslock acquired at the following:
> ((complete)&ret.event){+.+.}, at: [<ffffffff81326c1f>] submit_bio_wait+0x7f/0xb0
>
> which lock already depends on the new lock.
>
> the existing dependency chain (in reverse order) is:
>
> -> #2 ((complete)&ret.event){+.+.}:
> lock_acquire+0xab/0x200
> wait_for_completion_io+0x4e/0x1a0
> submit_bio_wait+0x7f/0xb0
> blkdev_issue_zeroout+0x71/0xa0
> xfs_bmapi_convert_unwritten+0x11f/0x1d0 [xfs]
> xfs_bmapi_write+0x374/0x11f0 [xfs]
> xfs_iomap_write_direct+0x2ac/0x430 [xfs]
> xfs_file_iomap_begin+0x20d/0xd50 [xfs]
> iomap_apply+0x43/0xe0
> dax_iomap_rw+0x89/0xf0
> xfs_file_dax_write+0xcc/0x220 [xfs]
> xfs_file_write_iter+0xf0/0x130 [xfs]
> __vfs_write+0xd9/0x150
> vfs_write+0xc8/0x1c0
> SyS_write+0x45/0xa0
> entry_SYSCALL_64_fastpath+0x1f/0xbe
>
> -> #1 (&xfs_nondir_ilock_class){++++}:
> lock_acquire+0xab/0x200
> down_write_nested+0x4a/0xb0
> xfs_ilock+0x263/0x330 [xfs]
> xfs_setattr_size+0x152/0x370 [xfs]
> xfs_vn_setattr+0x6b/0x90 [xfs]
> notify_change+0x27d/0x3f0
> do_truncate+0x5b/0x90
> path_openat+0x237/0xa90
> do_filp_open+0x8a/0xf0
> do_sys_open+0x11c/0x1f0
> entry_SYSCALL_64_fastpath+0x1f/0xbe
>
> -> #0 (&(&ip->i_mmaplock)->mr_lock){++++}:
> up_write+0x1c/0x40
> xfs_iunlock+0x1d0/0x310 [xfs]
> xfs_file_fallocate+0x8a/0x310 [xfs]
> loop_queue_work+0xb7/0x8d0
> kthread_worker_fn+0xb9/0x1f0
>
> Chain exists of:
> &(&ip->i_mmaplock)->mr_lock --> &xfs_nondir_ilock_class --> (complete)&ret.event
>
> Possible unsafe locking scenario by crosslock:
>
> CPU0 CPU1
> ---- ----
> lock(&xfs_nondir_ilock_class);
> lock((complete)&ret.event);
> lock(&(&ip->i_mmaplock)->mr_lock);
> unlock((complete)&ret.event);
>
> *** DEADLOCK ***
The warning is a false positive, caused by the fact that all
wait_for_completion()s in submit_bio_wait() are waiting with the same
lock class.
However, some bios have nothing to do with others, for example in the case
of loop devices, there's no direct connection between the bios of an upper
device and the bios of a lower device(=loop device).
The safest way to assign different lock classes to different devices is
to do it for each gendisk. In other words, this patch assigns a
lockdep_map per gendisk and uses it when initializing completion in
submit_bio_wait().
Analyzed-by: Dave Chinner <david@fromorbit.com>
Reported-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Byungchul Park <byungchul.park@lge.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: amir73il@gmail.com
Cc: axboe@kernel.dk
Cc: david@fromorbit.com
Cc: hch@infradead.org
Cc: idryomov@gmail.com
Cc: johan@kernel.org
Cc: johannes.berg@intel.com
Cc: kernel-team@lge.com
Cc: linux-block@vger.kernel.org
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: linux-xfs@vger.kernel.org
Cc: oleg@redhat.com
Cc: tj@kernel.org
Link: http://lkml.kernel.org/r/1508921765-15396-10-git-send-email-byungchul.park@lge.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
into drm-next
Just a few fixes for 4.15.
* 'drm-next-4.15' of git://people.freedesktop.org/~agd5f/linux:
drm/amd/amdgpu: Remove workaround for suspend/resume in uvd7
drm/amdgpu: don't flush the TLB before initializing GART
drm/amdgpu: minor cleanup for amdgpu_ttm_bind
drm/amdgpu/psp: prevent page fault by checking write_frame address(v4)
drm/amd/powerplay: retrieve the real-time coreClock values
drm/amd/powerplay: fix performance drop on Vega10
drm/amd/powerplay: add one smc message for Vega10
drm/amd/powerplay: fix amd_powerplay_reset()
amdgpu: add padding to the fence to handle ioctl.
drm/amdgpu:fix wb_clear
drm/amdgpu:fix vf_error_put
drm/amdgpu/sriov:now must reinit psp
drm/amdgpu: merge bios post checking functions
|
|
commit 635b8c8ecdd2 ("tap: Renaming tap related APIs, data structures,
macros") captured all the tap related fields into a new struct tap_dev.
However, it failed to remove those fields from struct macvlan_dev.
Those fields are currently unused and must be removed. While there
I moved the comment for MAX_TAP_QUEUES to the right place.
Fixes: 635b8c8ecdd27142 (tap: Renaming tap related APIs, data structures, macros)
Signed-off-by: Girish Moodalbail <girish.moodalbail@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add a pci_resize_resource() interface to allow device drivers to resize
BARs of their devices.
This is useful for devices with large local storage, e.g., graphics
devices. These devices often only expose 256MB BARs initially to be
compatible with 32-bit systems.
This function only tries to reprogram the windows of the bridge directly
above the requesting device and only the BAR of the same type (usually mem,
64bit, prefetchable). This is done to avoid disturbing other drivers by
changing the BARs of their devices.
Drivers should use the following sequence to resize their BARs:
1. Disable memory decoding of the device using the PCI cfg dword.
2. Use pci_release_resource() to release all BARs which can move during the
resize, including the one you want to resize.
3. Call pci_resize_resource() for each BAR you want to resize.
4. Call pci_assign_unassigned_bus_resources() to reassign new locations
for all BARs which are not resized, but could move.
5. If everything worked as expected, enable memory decoding in the device
again using the PCI cfg dword.
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
|
|
Since we now lookup elevator types with the appropriate multiqueue
capability, allow schedulers to register with an alias alongside
the real name. This is in preparation for allowing 'mq-deadline'
to register an alias of 'deadline' as well.
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Some user space application would like to do RSS on the inner
packet fields instead on the outer.
When MLX5_RX_HASH_INNER is set with one or more of the other
hash fields, then the RSS will be done using the inner packet.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
The device can support receive Stateless Offloads for the inner
packet's fields only when the packet is processed by TIR which is
enabled to support tunneling. Otherwise, the device treats the
packet as an ordinary non-tunneling packet and receive offloads
can be done only for the outer packet's field.
In order to enable receive Stateless Offloading support for incoming
tunneling traffic the TIR should be created with tunneled_offload_en.
Tunneling offloads is supported only be raw ethernet QP.
This patch includes:
* New QP creation flag for tunneling offloads.
* Reports device capabilities.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
This patch updates the mlx5_ifc with the following:
- Fix tunnel_stateless_gre typo.
- max_geneve_opt_len - Maximum geneve options length.
- tunnel_stateless_geneve_rx - If set, receive Stateless
Offloads for Geneve tunneled (inner) packets are supported.
Signed-off-by: Maor Gottlieb <maorg@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
In some benchmarks and some CPU architectures, writing the CQE on a full
cache line size improves performance by saving memory access operations
(read-modify-write) relative to partial cache line change. This patch
lets the user to configure the device to pad the CQE up to 128B in case
its content is less than 128B. Currently the driver supports only padding
for a CQE size of 128B.
Signed-off-by: Guy Levi <guyle@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
In commit 1cbe6fc86ccf ("IB/mlx5: Add support for CQE compressing") the
concept of CQE compression was introduced and added a support for 64B
CQE size. This change update the code to support 128B CQE size as well.
Signed-off-by: Guy Levi <guyle@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Adding new bits in mlx5_ifc_cmd_hca_cap to get the hardware capabilities
for:
- compression_128: Support 128B CQE compression
- cqe_128_always: Support 128B CQE padding
Signed-off-by: Guy Levi <guyle@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
Allow creation of a multi-packet receive queue.
In order to create a multi-packet RQ, the following fields in
the mlx5_ib_rwq should be set:
- log_num_strides: Log of number of strides per WQE
- single_stride_log_num_of_bytes: Log of a single stride size
- two_byte_shift_en: When enabled, hardware pads 2 bytes of zeros
before writing the message to memory (e.g. for the IP alignment).
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
This patch reports the device's striding RQ capabilities to
the user-space:
- min/max_single_stride_log_num_of_bytes: Log of min/max number of
bytes in a single stride.
- min/max_single_wqe_log_num_of_strides: Log of min/max number of
strides in a single WQE.
- supported_qpts: A bit mask to know which QP types support multi-
packet RQ, for now only Raw Packet QPs.
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Doug Ledford <dledford@redhat.com>
|
|
'spi/fix/qspi', 'spi/fix/stm32' and 'spi/fix/uapi' into spi-linus
|
|
The workqueue code added manual lock acquisition annotations to catch
deadlocks.
After lockdepcrossrelease was introduced, some of those became redundant,
since wait_for_completion() already does the acquisition and tracking.
Remove the duplicate annotations.
Signed-off-by: Byungchul Park <byungchul.park@lge.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: amir73il@gmail.com
Cc: axboe@kernel.dk
Cc: darrick.wong@oracle.com
Cc: david@fromorbit.com
Cc: hch@infradead.org
Cc: idryomov@gmail.com
Cc: johan@kernel.org
Cc: johannes.berg@intel.com
Cc: kernel-team@lge.com
Cc: linux-block@vger.kernel.org
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: linux-xfs@vger.kernel.org
Cc: oleg@redhat.com
Cc: tj@kernel.org
Link: http://lkml.kernel.org/r/1508921765-15396-9-git-send-email-byungchul.park@lge.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Sometimes we want to initialize completions with sparate lockdep maps
to assign lock classes as desired. For example, the workqueue code
needs to directly manage lockdep maps, since only the code is aware of
how to classify lockdep maps properly.
Provide additional macros initializing completions in that way.
Signed-off-by: Byungchul Park <byungchul.park@lge.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: amir73il@gmail.com
Cc: axboe@kernel.dk
Cc: darrick.wong@oracle.com
Cc: david@fromorbit.com
Cc: hch@infradead.org
Cc: idryomov@gmail.com
Cc: johan@kernel.org
Cc: johannes.berg@intel.com
Cc: kernel-team@lge.com
Cc: linux-block@vger.kernel.org
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: linux-xfs@vger.kernel.org
Cc: oleg@redhat.com
Cc: tj@kernel.org
Link: http://lkml.kernel.org/r/1508921765-15396-8-git-send-email-byungchul.park@lge.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
completion variables
CONFIG_LOCKDEP_COMPLETIONS uses "(complete)" as a prefix of lock name
for completion variable.
However, what we should use here is a noun - so use "(completion)" instead.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Byungchul Park <byungchul.park@lge.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: amir73il@gmail.com
Cc: axboe@kernel.dk
Cc: darrick.wong@oracle.com
Cc: david@fromorbit.com
Cc: hch@infradead.org
Cc: idryomov@gmail.com
Cc: johan@kernel.org
Cc: johannes.berg@intel.com
Cc: kernel-team@lge.com
Cc: linux-block@vger.kernel.org
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: linux-xfs@vger.kernel.org
Cc: oleg@redhat.com
Cc: tj@kernel.org
Link: http://lkml.kernel.org/r/1508921765-15396-4-git-send-email-byungchul.park@lge.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
After this patch the lockdep_map structure takes no space if lockdep is
disabled, reducing the number of #ifdefs in unrelated kernel code.
Signed-off-by: Byungchul Park <byungchul.park@lge.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: amir73il@gmail.com
Cc: axboe@kernel.dk
Cc: darrick.wong@oracle.com
Cc: david@fromorbit.com
Cc: hch@infradead.org
Cc: idryomov@gmail.com
Cc: johan@kernel.org
Cc: johannes.berg@intel.com
Cc: kernel-team@lge.com
Cc: linux-block@vger.kernel.org
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-mm@kvack.org
Cc: linux-xfs@vger.kernel.org
Cc: oleg@redhat.com
Cc: tj@kernel.org
Link: http://lkml.kernel.org/r/1508921765-15396-3-git-send-email-byungchul.park@lge.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/snawrocki/clk into clk-next
Pull Samsung clk driver updates from Sylwester Nawrocki:
Overall clk/samsung clean up and fixes. Removed remaining unused code
after removal of exynos4212 SoC support; dropped internal data structure
fields and related code for registering clkdev lookup entry for each
possible clock object, clkdev aliases could still be defined if needed
in a separate table; other minor fixes of the clock tree definitions.
* tag 'clk-v4.15-samsung' of git://git.kernel.org/pub/scm/linux/kernel/git/snawrocki/clk:
clk: samsung: Remove obsolete clkdev alias support
clk: samsung: Add explicit MPLL, EPLL clkdev aliases in S3C2443 driver
clk: samsung: Rework clkdev alias handling in S3C2443 driver
clk: samsung: Rework clkdev alias handling in Exynos5440 driver
clk: samsung: Drop useless alias in Exynos5420 clk driver
clk: samsung: Remove clkdev alias support in Exynos5250 clk driver
clk: samsung: Remove double assignment of CLK_ARM_CLK in Exynos4 driver
clk: samsung: Remove clkdev alias support in Exynos4 clk driver
clk: samsung: Remove support for obsolete Exynos4212 CPU clock
clk: samsung: Remove support for Exynos4212 SoCs in Exynos CLKOUT driver
clk: samsung: Properly propagate flags in __PLL macro
clk: samsung: Fix m2m scaler clock on Exynos542x
clk: samsung: Delete a memory allocation error message in clk-cpu.c
|
|
The vtable call pin2mask() was introducing a vtable function call
in every gpiochip callback for a generic MMIO GPIO chip. This was
not exactly efficient. (Maybe link-time optimization could get rid of
it, I don't know.)
After removing all external calls into this API we can make it a
boolean flag in the struct gpio_chip call and sink the function into
the gpio-mmio driver yielding encapsulation and potential speedups.
Cc: Anton Vorontsov <anton@enomsg.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
to READ_ONCE()/WRITE_ONCE()
Please do not apply this to mainline directly, instead please re-run the
coccinelle script shown below and apply its output.
For several reasons, it is desirable to use {READ,WRITE}_ONCE() in
preference to ACCESS_ONCE(), and new code is expected to use one of the
former. So far, there's been no reason to change most existing uses of
ACCESS_ONCE(), as these aren't harmful, and changing them results in
churn.
However, for some features, the read/write distinction is critical to
correct operation. To distinguish these cases, separate read/write
accessors must be used. This patch migrates (most) remaining
ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following
coccinelle script:
----
// Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and
// WRITE_ONCE()
// $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch
virtual patch
@ depends on patch @
expression E1, E2;
@@
- ACCESS_ONCE(E1) = E2
+ WRITE_ONCE(E1, E2)
@ depends on patch @
expression E;
@@
- ACCESS_ONCE(E)
+ READ_ONCE(E)
----
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: davem@davemloft.net
Cc: linux-arch@vger.kernel.org
Cc: mpe@ellerman.id.au
Cc: shuah@kernel.org
Cc: snitzer@redhat.com
Cc: thor.thayer@linux.intel.com
Cc: tj@kernel.org
Cc: viro@zeniv.linux.org.uk
Cc: will.deacon@arm.com
Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
For several reasons, it is desirable to use {READ,WRITE}_ONCE() in
preference to ACCESS_ONCE(), and new code is expected to use one of the
former. So far, there's been no reason to change most existing uses of
ACCESS_ONCE(), as these aren't currently harmful.
However, for some features it is necessary to instrument reads and
writes separately, which is not possible with ACCESS_ONCE(). This
distinction is critical to correct operation.
It's possible to transform the bulk of kernel code using the Coccinelle
script below. However, this doesn't pick up some uses, including those
in <linux/average.h>. As a preparatory step, this patch converts the
file to use {READ,WRITE}_ONCE() consistently.
At the same time, this patch addds missing includes necessary for
{READ,WRITE}_ONCE(), *BUG_ON*(), and ilog2().
----
virtual patch
@ depends on patch @
expression E1, E2;
@@
- ACCESS_ONCE(E1) = E2
+ WRITE_ONCE(E1, E2)
@ depends on patch @
expression E;
@@
- ACCESS_ONCE(E)
+ READ_ONCE(E)
----
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Johannes Berg <johannes.berg@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: mpe@ellerman.id.au
Cc: shuah@kernel.org
Cc: snitzer@redhat.com
Cc: thor.thayer@linux.intel.com
Cc: tj@kernel.org
Cc: viro@zeniv.linux.org.uk
Cc: will.deacon@arm.com
Link: http://lkml.kernel.org/r/1508792849-3115-9-git-send-email-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
READ_ONCE()/WRITE_ONCE()
For several reasons, it is desirable to use {READ,WRITE}_ONCE() in
preference to ACCESS_ONCE(), and new code is expected to use one of the
former. So far, there's been no reason to change most existing uses of
ACCESS_ONCE(), as these aren't currently harmful.
However, for some features it is necessary to instrument reads and
writes separately, which is not possible with ACCESS_ONCE(). This
distinction is critical to correct operation.
It's possible to transform the bulk of kernel code using the Coccinelle
script below. However, this doesn't handle comments, leaving references
to ACCESS_ONCE() instances which have been removed. As a preparatory
step, this patch converts netlink and netfilter code and comments to use
{READ,WRITE}_ONCE() consistently.
----
virtual patch
@ depends on patch @
expression E1, E2;
@@
- ACCESS_ONCE(E1) = E2
+ WRITE_ONCE(E1, E2)
@ depends on patch @
expression E;
@@
- ACCESS_ONCE(E)
+ READ_ONCE(E)
----
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Florian Westphal <fw@strlen.de>
Cc: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pablo Neira Ayuso <pablo@netfilter.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arch@vger.kernel.org
Cc: mpe@ellerman.id.au
Cc: shuah@kernel.org
Cc: snitzer@redhat.com
Cc: thor.thayer@linux.intel.com
Cc: tj@kernel.org
Cc: viro@zeniv.linux.org.uk
Cc: will.deacon@arm.com
Link: http://lkml.kernel.org/r/1508792849-3115-7-git-send-email-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
For several reasons, it is desirable to use {READ,WRITE}_ONCE() in
preference to ACCESS_ONCE(), and new code is expected to use one of the
former. So far, there's been no reason to change most existing uses of
ACCESS_ONCE(), as these aren't currently harmful.
However, for some features it is necessary to instrument reads and
writes separately, which is not possible with ACCESS_ONCE(). This
distinction is critical to correct operation.
It's possible to transform the bulk of kernel code using the Coccinelle
script below. However, this doesn't handle comments, leaving references
to ACCESS_ONCE() instances which have been removed. As a preparatory
step, this patch converts the dcache code and comments to use
{READ,WRITE}_ONCE() consistently.
----
virtual patch
@ depends on patch @
expression E1, E2;
@@
- ACCESS_ONCE(E1) = E2
+ WRITE_ONCE(E1, E2)
@ depends on patch @
expression E;
@@
- ACCESS_ONCE(E)
+ READ_ONCE(E)
----
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: davem@davemloft.net
Cc: linux-arch@vger.kernel.org
Cc: mpe@ellerman.id.au
Cc: shuah@kernel.org
Cc: snitzer@redhat.com
Cc: thor.thayer@linux.intel.com
Cc: tj@kernel.org
Cc: will.deacon@arm.com
Link: http://lkml.kernel.org/r/1508792849-3115-4-git-send-email-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
When a prospective writer takes the qrwlock locking slowpath due to the
lock being held, it attempts to cmpxchg the wmode field from 0 to
_QW_WAITING so that concurrent lockers also take the slowpath and queue
on the spinlock accordingly, allowing the lockers to drain.
Unfortunately, this isn't fair, because a fastpath writer that comes in
after the lock is made available but before the _QW_WAITING flag is set
can effectively jump the queue. If there is a steady stream of prospective
writers, then the waiter will be held off indefinitely.
This patch restores fairness by separating _QW_WAITING and _QW_LOCKED
into two distinct fields: _QW_LOCKED continues to occupy the bottom byte
of the lockword so that it can be cleared unconditionally when unlocking,
but _QW_WAITING now occupies what used to be the bottom bit of the reader
count. This then forces the slow-path for concurrent lockers.
Tested-by: Waiman Long <longman@redhat.com>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Tested-by: Adam Wallis <awallis@codeaurora.org>
Tested-by: Jan Glauber <jglauber@cavium.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Jeremy.Linton@arm.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1507810851-306-6-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The qrwlock slowpaths involve spinning when either a prospective reader
is waiting for a concurrent writer to drain, or a prospective writer is
waiting for concurrent readers to drain. In both of these situations,
atomic_cond_read_acquire() can be used to avoid busy-waiting and make use
of any backoff functionality provided by the architecture.
This patch replaces the open-code loops and rspin_until_writer_unlock()
implementation with atomic_cond_read_acquire(). The write mode transition
zero to _QW_WAITING is left alone, since (a) this doesn't need acquire
semantics and (b) should be fast.
Tested-by: Waiman Long <longman@redhat.com>
Tested-by: Jeremy Linton <jeremy.linton@arm.com>
Tested-by: Adam Wallis <awallis@codeaurora.org>
Tested-by: Jan Glauber <jglauber@cavium.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Jeremy.Linton@arm.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1507810851-306-4-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
smp_cond_load_acquire() provides a way to spin on a variable with acquire
semantics until some conditional expression involving the variable is
satisfied. Architectures such as arm64 can potentially enter a low-power
state, waking up only when the value of the variable changes, which
reduces the system impact of tight polling loops.
This patch makes the same interface available to users of atomic_t,
atomic64_t and atomic_long_t, rather than require messy accesses to the
structure internals.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Jeremy.Linton@arm.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1507810851-306-3-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
There's no good reason to keep the internal structure of struct qrwlock
hidden from qrwlock.h, particularly as it's actually needed for unlock
and ends up being abstracted independently behind the __qrwlock_write_byte()
function.
Stop pretending we can hide this stuff, and move the __qrwlock definition
into qrwlock, removing the __qrwlock_write_byte() nastiness and using the
same struct definition everywhere instead.
Signed-off-by: Will Deacon <will.deacon@arm.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Jeremy.Linton@arm.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/1507810851-306-2-git-send-email-will.deacon@arm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
drm_mode_create_lease
Creates a lease for a list of drm mode objects, returning an
fd for the new drm_master and a 64-bit identifier for the lessee
drm_mode_list_lesees
List the identifiers of the lessees for a master file
drm_mode_get_lease
List the leased objects for a master file
drm_mode_revoke_lease
Erase the set of objects managed by a lease.
This should suffice to at least create and query leases.
Changes for v2 as suggested by Daniel Vetter <daniel.vetter@ffwll.ch>:
* query ioctls only query the master associated with
the provided file.
* 'mask_lease' value has been removed
* change ioctl has been removed.
Changes for v3 suggested in part by Dave Airlie <airlied@gmail.com>
* Add revoke ioctl.
Changes for v4 suggested by Dave Airlie <airlied@gmail.com>
* Expand on the comment about the magic use of &drm_lease_idr_object
* Pad lease ioctl structures to align on 64-bit boundaries
Changes for v5 suggested by Dave Airlie <airlied@gmail.com>
* Check for non-negative object_id in create_lease to avoid debug
output from the kernel.
Changes for v6 provided by Dave Airlie <airlied@gmail.com>
* For non-universal planes add primary/cursor planes to lease
If we aren't exposing universal planes to this userspace client,
and it requests a lease on a crtc, we should implicitly export the
primary and cursor planes for the crtc.
If the lessee doesn't request universal planes, it will just see
the crtc, but if it does request them it will then see the plane
objects as well.
This also moves the object look ups earlier as a side effect, so
we'd exit the ioctl quicker for non-existant objects.
* Restrict leases to crtc/connector/planes.
This only allows leasing for objects we wish to allow.
Changes for v7 provided by Dave Airlie <airlied@gmail.com>
* Check pad args are 0
* Check create flags and object count are valid.
* Check return from fd allocation
* Refactor lease idr setup and add some simple validation
* Use idr_mutex uniformly (Keith)
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Attempts to modify un-leased objects are rejected with an error.
Information returned about unleased objects is modified to make them
appear unusable and/or disconnected.
Changes for v2 as suggested by Daniel Vetter <daniel.vetter@ffwll.ch>:
* With the change in the __drm_mode_object_find API to pass the
file_priv along, we can now centralize most of the lease-based
access checks in that function.
* A few places skip that API and require in-line checks.
Changes for v3 provided by Dave Airlie <airlied@redhat.com>
* remove support for leasing encoders.
* add support for leasing planes.
Changes for v4
* Only call drm_lease_held if DRIVER_MODESET.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
This provides new data structures to hold "lease" information about
drm mode setting objects, and provides for creating new drm_masters
which have access to a subset of the available drm resources.
An 'owner' is a drm_master which is not leasing the objects from
another drm_master, and hence 'owns' them.
A 'lessee' is a drm_master which is leasing objects from some other
drm_master. Each lessee holds the set of objects which it is leasing
from the lessor.
A 'lessor' is a drm_master which is leasing objects to another
drm_master. This is the same as the owner in the current code.
The set of objects any drm_master 'controls' is limited to the set of
objects it leases (for lessees) or all objects (for owners).
Objects not controlled by a drm_master cannot be modified through the
various state manipulating ioctls, and any state reported back to user
space will be edited to make them appear idle and/or unusable. For
instance, connectors always report 'disconnected', while encoders
report no possible crtcs or clones.
The full list of lessees leasing objects from an owner (either
directly, or indirectly through another lessee), can be searched from
an idr in the drm_master of the owner.
Changes for v2 as suggested by Daniel Vetter <daniel.vetter@ffwll.ch>:
* Sub-leasing has been disabled.
* BUG_ON for lock checking replaced with lockdep_assert_held
* 'change' ioctl has been removed.
* Leased objects can always be controlled by the lessor; the
'mask_lease' flag has been removed
* Checking for leased status has been simplified, replacing
the drm_lease_check function with drm_lease_held.
Changes in v3, some suggested by Dave Airlie <airlied@gmail.com>
* Add revocation. This allows leases to be effectively revoked by
removing all of the objects they have access to. The lease itself
hangs around as it's hanging off a file.
* Free the leases IDR when the master is destroyed
* _drm_lease_held should look at lessees, not lessor
* Allow non-master files to check for lease status
Changes in v4, suggested by Dave Airlie <airlied@gmail.com>
* Formatting and whitespace changes
Changes in v5 (airlied)
* check DRIVER_MODESET before lease destroy call
* check DRIVER_MODESET for lease revoke (Chris)
* Use idr_mutex uniformly for all lease elements of struct drm_master. (Keith)
Signed-off-by: Keith Packard <keithp@keithp.com>
|
|
Separate out lease debugging from the core.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Hans Liljestrand <ishkamiel@gmail.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: "Reshetova, Elena" <elena.reshetova@intel.com>
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-sctp@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
After the patch 'rtnetlink: bring NETDEV_CHANGELOWERSTATE event
process back to rtnetlink_event', bond_lower_state_changed would
generate NETDEV_CHANGEUPPER event which would send a notification
to userspace in rtnetlink_event.
There's no need to call rtmsg_ifinfo to send the notification
any more. So this patch is to remove it from these places after
bond_lower_state_changed.
Besides, after this, rtmsg_ifinfo is not needed to be exported.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch enables multiple bpf attachments for a
kprobe/uprobe/tracepoint single trace event.
Each trace_event keeps a list of attached perf events.
When an event happens, all attached bpf programs will
be executed based on the order of attachment.
A global bpf_event_mutex lock is introduced to protect
prog_array attaching and detaching. An alternative will
be introduce a mutex lock in every trace_event_call
structure, but it takes a lot of extra memory.
So a global bpf_event_mutex lock is a good compromise.
The bpf prog detachment involves allocation of memory.
If the allocation fails, a dummy do-nothing program
will replace to-be-detached program in-place.
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Sock lock may be taken in the message timer function which is a
problem since timers run in BH. Instead of timers use delayed_work.
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Fixes: bbb03029a899 ("strparser: Generalize strparser")
Signed-off-by: Tom Herbert <tom@quantonium.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, ip6_tnl_xmit_ctl drops tunneled packets if the remote
address (outer v6 destination) is one of host's locally configured
addresses.
Same applies to ip6_tnl_rcv_ctl: it drops packets if the remote address
(outer v6 source) is a local address.
This prevents using ipxip6 (and ip6_gre) tunnels whose local/remote
endpoints are on same host; OTOH v4 tunnels (ipip or gre) allow such
configurations.
An example where this proves useful is a system where entities are
identified by their unique v6 addresses, and use tunnels to encapsulate
traffic between them. The limitation prevents placing several entities
on same host.
Introduce IP6_TNL_F_ALLOW_LOCAL_REMOTE which allows to bypass this
restriction.
Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add resizable BAR infrastructure, including defines and helper functions to
read the possible sizes of a BAR and update its size. See PCIe r3.1, sec
7.22.
Link: https://pcisig.com/sites/default/files/specification_documents/ECN_Resizable-BAR_24Apr2008.pdf
Signed-off-by: Christian König <christian.koenig@amd.com>
[bhelgaas: rename to functions with "rebar" (to match #defines), drop shift
#defines, drop "_MASK" suffixes, fix typos, fix kerneldoc]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
|
|
In preparation for unconditionally passing the struct timer_list pointer to
all timer callbacks, switch to using the new timer_setup() and from_timer()
to pass the timer pointer explicitly.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
previous patches removed all writes to them.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
not needed/used anymore.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
We currently pass down the l4 protocol to the conntrack ->packet()
function, but the only user of this is the debug info decision.
Same information can be derived from struct nf_conn.
Add a wrapper for the previous patch that extracs the information
from nf_conn and passes it to nf_l4proto_log_invalid().
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
We currently pass down the l4 protocol to the conntrack ->packet()
function, but the only user of this is the debug info decision.
Same information can be derived from struct nf_conn.
As a first step, add and use a new log function for this, similar to
nf_ct_helper_log().
Add __cold annotation -- invalid packets should be infrequent so
gcc can consider all call paths that lead to such a function as
unlikely.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Merge in ARM PMU and perf updates for 4.15:
- Support for the Statistical Profiling Extension
- Support for Hisilicon's SoC PMU
Signed-off-by: Will Deacon <will.deacon@arm.com>
|
|
irq_is_percpu indicates whether an irq should only target a single cpu.
PERCPU_DEVID flag indicates that an irq can be configured differently on
each cpu it can target.
Provide a function to check whether an irq is PERCPU_DEVID.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
|
|
The special value of 0 for device resume latency PM QoS means
"no restriction", but there are two problems with that.
First, device resume latency PM QoS requests with 0 as the
value are always put in front of requests with positive
values in the priority lists used internally by the PM QoS
framework, causing 0 to be chosen as an effective constraint
value. However, that 0 is then interpreted as "no restriction"
effectively overriding the other requests with specific
restrictions which is incorrect.
Second, the users of device resume latency PM QoS have no
way to specify that *any* resume latency at all should be
avoided, which is an artificial limitation in general.
To address these issues, modify device resume latency PM QoS to
use S32_MAX as the "no constraint" value and 0 as the "no
latency at all" one and rework its users (the cpuidle menu
governor, the genpd QoS governor and the runtime PM framework)
to follow these changes.
Also add a special "n/a" value to the corresponding user space I/F
to allow user space to indicate that it cannot accept any resume
latencies at all for the given device.
Fixes: 85dc0b8a4019 (PM / QoS: Make it possible to expose PM QoS latency constraints)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=197323
Reported-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Alex Shi <alex.shi@linaro.org>
Cc: All applicable <stable@vger.kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next
Felipe writes:
usb: changes for v4.15 merge window
Not much going on this time around. With only 51 non-merge commits,
this was one of the smallest pull requests from the Gadget tree.
Most of the changes are in the mtu3 driver which added support for
36-bit DMA, support for USB 3.1 and support for dual-role (along with
some non-critical fixes).
The dwc2 driver got a few improvements to how we handle gadget state
tracking and also added support for STM32F7xx devices.
Other than that, we just some minor non-critical fixes and
improvements all over the place.
|
