| Age | Commit message (Collapse) | Author |
|---|
|
Add a function for drivers to check if the a firmware initialized
fb is corresponds to their aperture. This allows drivers to check if the
device corresponds to what the firmware set up as the display device.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=215203
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1840
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
ASoC and HDA will use the same registers to configure
internal boost for the device
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20211217115708.882525-7-tanureal@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
ASoC and HDA will use the same register to set channels
for the device
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20211217115708.882525-6-tanureal@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
ASoC and HDA systems require the same errata patches, so
move it to the shared code using a function the correctly
applies the patches by revision
Also, move CS35L41_DSP1_CCM_CORE_CTRL write to errata
patch function as is required to be written at boot,
but not in regmap_register_patch sequence as will affect
waking up from hibernation
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20211217115708.882525-5-tanureal@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
ASoC and HDA will do the same cs35l41_otp_unpack, so move it
to shared code
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20211217115708.882525-3-tanureal@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
To support CS35L41 in HDA systems the HDA driver
for CS35L41 would have to duplicate some functions
that already exist on ASoC driver
So instead of duplicate the code, use the new lib
source as a shared resource for both ASoC and HDA
Also, change the way CONFIG_SND_SOC_CS35L41 is
selected, as reported by Intel Kernel test robot,
it is possible to build SND_SOC_CS35L41_SPI/I2C
without the main driver, which would lead to build
failures.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20211217115708.882525-2-tanureal@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
This reverts commit d8e9a406a931f687945703a4bac45042eb81ce92.
It needs some future changes as pointed out by Johan and is not ready to
be merged just yet.
Reported-by: Johan Hovold <johan@kernel.org>
Cc: Magnus Damm <damm+renesas@opensource.se>
Link: https://lore.kernel.org/r/Yc7oZ/1tu95Z4wPS@hovoldconsulting.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Raw NAND core:
* Export nand_read_page_hwecc_oob_first()
GPMC memory controller for OMAP2 NAND controller:
* GPMC:
- Add support for AM64 SoC and allow build on K3 platforms
- Use a compatible match table when checking for NAND controller
- Use platform_get_irq() to get the interrupt
Raw NAND controller drivers:
* OMAP2 NAND controller:
- Document the missing 'rb-gpios' DT property
- Drop unused variable
- Fix force_8bit flag behaviour for DMA mode
- Move to exec_op interface
- Use platform_get_irq() to get the interrupt
* Renesas:
- Add new NAND controller driver with its bindings and MAINTAINERS entry
* Onenand:
- Remove redundant variable ooblen
* MPC5121:
- Remove unused variable in ads5121_select_chip()
* GPMI:
- Add ERR007117 protection for nfc_apply_timings
- Remove explicit default gpmi clock setting for i.MX6
- Use platform_get_irq_byname() to get the interrupt
- Remove unneeded variable
* Ingenic:
- JZ4740 needs 'oob_first' read page function
* Davinci:
- Rewrite function description
- Avoid duplicated page read
- Don't calculate ECC when reading page
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
SPI NOR core changes:
- Add Pratyush as SPI NOR co-maintainer.
- Flash parameters initialization was done in a spaghetti way. Clean
flash parameters initialization.
- Rework the flash_info flags and clarify where one should be used.
- Initialize all flash parameters based on JESD216 SFDP where possible.
Flash parameters and settings that are SFDP discoverable should not be
duplicated via flash_info flags at flash declaration.
- Remove debugfs entries that duplicate sysfs entries.
SPI NOR manufacturer drivers changes:
- Use late_init() hook in various drivers to make it clear that those
flash parameters are either not declared in the JESD216 SFDP standard,
or the SFDP tables which define those flash parameters are not defined
by the flash.
- Fix mtd size for s3an flashes.
- Write 2 bytes when disabling Octal DTR mode: 1 byte long transactions are
not allowed in 8D-8D-8D mode.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
Memory controller drivers for v5.17 - OMAP GPMC
1. Add support for AM64 SoC.
2. Minor improvement: use platform_get_irq().
[miquel.raynal@bootlin.com: A first commit introduced a new omap
compatible and another moved the IDs to a header which created a
conflict: moving the new ID as well in the header fixed it.]
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
When modifying TTL, packet's csum has to be recalculated.
Due to HW issue in ConnectX-5, csum recalculation for modify TTL
is supported through a work-around that is specifically enabled
by configuration.
If the work-around isn't enabled, ignore the modify TTL action
rather than adding an unsupported action.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
|
|
Match on geneve_tlv_option_0_exist field on devices that support STEv1.
Signed-off-by: Muhammad Sammar <muhammads@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
|
|
Add support for misc5 match parameter as per HW spec, this will allow
matching on tunnel_header fields.
Signed-off-by: Muhammad Sammar <muhammads@nvidia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
|
|
Macros prefix should be capital letters - fix the prefix in
mlx5_FLEX_PARSER_MPLS_OVER_UDP_ENABLED.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
|
|
Commit d64c2a76123f ("staging: irda: remove the irda network stack and
drivers") removes the config IRDA.
Remove the remaining references to this non-existing config in the network
header files.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Link: https://lore.kernel.org/r/20211229113620.19368-1-lukas.bulwahn@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
commit 077cdda764c7 ("net/mlx5e: TC, Fix memory leak with rules with internal port")
commit 31108d142f36 ("net/mlx5: Fix some error handling paths in 'mlx5e_tc_add_fdb_flow()'")
commit 4390c6edc0fb ("net/mlx5: Fix some error handling paths in 'mlx5e_tc_add_fdb_flow()'")
https://lore.kernel.org/all/20211229065352.30178-1-saeed@kernel.org/
net/smc/smc_wr.c
commit 49dc9013e34b ("net/smc: Use the bitmap API when applicable")
commit 349d43127dac ("net/smc: fix kernel panic caused by race of smc_sock")
bitmap_zero()/memset() is removed by the fix
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from.. Santa?
No regressions on our radar at this point. The igc problem fixed here
was the last one I was tracking but it was broken in previous
releases, anyway. Mostly driver fixes and a couple of largish SMC
fixes.
Current release - regressions:
- xsk: initialise xskb free_list_node, fixup for a -rc7 fix
Current release - new code bugs:
- mlx5: handful of minor fixes:
- use first online CPU instead of hard coded CPU
- fix some error handling paths in 'mlx5e_tc_add_fdb_flow()'
- fix skb memory leak when TC classifier action offloads are disabled
- fix memory leak with rules with internal OvS port
Previous releases - regressions:
- igc: do not enable crosstimestamping for i225-V models
Previous releases - always broken:
- udp: use datalen to cap ipv6 udp max gso segments
- fix use-after-free in tw_timer_handler due to early free of stats
- smc: fix kernel panic caused by race of smc_sock
- smc: don't send CDC/LLC message if link not ready, avoid timeouts
- sctp: use call_rcu to free endpoint, avoid UAF in sock diag
- bridge: mcast: add and enforce query interval minimum
- usb: pegasus: do not drop long Ethernet frames
- mlx5e: fix ICOSQ recovery flow for XSK
- nfc: uapi: use kernel size_t to fix user-space builds"
* tag 'net-5.16-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
fsl/fman: Fix missing put_device() call in fman_port_probe
selftests: net: using ping6 for IPv6 in udpgro_fwd.sh
Documentation: fix outdated interpretation of ip_no_pmtu_disc
net/ncsi: check for error return from call to nla_put_u32
net: bridge: mcast: fix br_multicast_ctx_vlan_global_disabled helper
net: fix use-after-free in tw_timer_handler
selftests: net: Fix a typo in udpgro_fwd.sh
selftests/net: udpgso_bench_tx: fix dst ip argument
net: bridge: mcast: add and enforce startup query interval minimum
net: bridge: mcast: add and enforce query interval minimum
ipv6: raw: check passed optlen before reading
xsk: Initialise xskb free_list_node
net/mlx5e: Fix wrong features assignment in case of error
net/mlx5e: TC, Fix memory leak with rules with internal port
ionic: Initialize the 'lif->dbid_inuse' bitmap
igc: Fix TX timestamp support for non-MSI-X platforms
igc: Do not enable crosstimestamping for i225-V models
net/smc: fix kernel panic caused by race of smc_sock
net/smc: don't send CDC/LLC message if link not ready
NFC: st21nfca: Fix memory leak in device probe and remove
...
|
|
x86 ACPI boards which ship with only Android as their factory image usually
declare a whole bunch of bogus I2C devs in their ACPI tables and sometimes
there are issues with serdev devices on these boards too, e.g. the resource
points to the wrong serdev_controller.
Instantiating I2C / serdev devs for these bogus devs causes various issues,
e.g. GPIO/IRQ resource conflicts because sometimes drivers do bind to them.
The Android x86 kernel fork shipped on these devices has some special code
to remove the bogus I2C clients (and serdevs are ignored completely).
Introduce acpi_quirk_skip_i2c_client_enumeration() and
acpi_quirk_skip_serdev_enumeration() helpers. Which can be used by the I2C/
serdev code to skip instantiating any I2C or serdev devs on broken boards.
These 2 helpers are added to drivers/acpi/x86/utils.c so that the DMI table
can be shared between the I2C and serdev code.
Note these boards typically do actually have I2C and serdev devices, just
different ones then the ones described in their DSDT. The devices which
are actually present are manually instantiated by the
drivers/platform/x86/x86-android-tablets.c kernel module.
The new helpers are only build if CONFIG_X86_ANDROID_TABLETS is enabled,
otherwise they are empty stubs to not unnecessarily grow the kernel size.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Add a new function to enable CPPC feature. This function
will write Continuous Performance Control package
EnableRegister field on the processor.
CPPC EnableRegister register described in section 8.4.7.1 of ACPI 6.4:
This element is optional. If supported, contains a resource descriptor
with a single Register() descriptor that describes a register to which
OSPM writes a One to enable CPPC on this processor. Before this register
is set, the processor will be controlled by legacy mechanisms (ACPI
Pstates, firmware, etc.).
This register will be used for AMD processors to enable AMD P-State
function instead of legacy ACPI P-States.
Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Usage of counter_register() yields issues in device lifetime tracking. All
drivers were converted to the new API, so the old one can go away.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20211230150300.72196-24-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The current implementation gets device lifetime tracking wrong. The
problem is that allocation of struct counter_device is controlled by the
individual drivers but this structure contains a struct device that
might have to live longer than a driver is bound. As a result a command
sequence like:
{ sleep 5; echo bang; } > /dev/counter0 &
sleep 1;
echo 40000000.timer:counter > /sys/bus/platform/drivers/stm32-timer-counter/unbind
can keep a reference to the struct device and unbinding results in
freeing the memory occupied by this device resulting in an oops.
This commit provides two new functions (plus some helpers):
- counter_alloc() to allocate a struct counter_device that is
automatically freed once the embedded struct device is released
- counter_add() to register such a device.
Note that this commit doesn't fix any issues, all drivers have to be
converted to these new functions to correct the lifetime problems.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20211230150300.72196-14-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
For now this just wraps accessing struct counter_device::priv. However
this is about to change and converting drivers to this helper
individually makes fixing device lifetime issues result in easier to
review patches.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20211230150300.72196-5-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Pull ARM cpufreq updates for 5.17-rc1 from Viresh Kumar:
"- Qcom cpufreq driver updates improve irq support (Ard Biesheuvel, Stephen Boyd,
and Vladimir Zapolskiy).
- Fixes double devm_remap for mediatek driver (Hector Yuan).
- Introduces thermal pressure helpers (Lukasz Luba)."
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: mediatek-hw: Fix double devm_remap in hotplug case
cpufreq: qcom-hw: Use optional irq API
cpufreq: qcom-hw: Set CPU affinity of dcvsh interrupts
cpufreq: qcom-hw: Fix probable nested interrupt handling
cpufreq: qcom-cpufreq-hw: Avoid stack buffer for IRQ name
arch_topology: Remove unused topology_set_thermal_pressure() and related
cpufreq: qcom-cpufreq-hw: Use new thermal pressure update function
cpufreq: qcom-cpufreq-hw: Update offline CPUs per-cpu thermal pressure
thermal: cpufreq_cooling: Use new thermal pressure update function
arch_topology: Introduce thermal pressure update function
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy into char-misc-next
Vinod writes:
phy-for-5.17
- New support:
- Qualcomm eDP PHY driver
- Qualcomm SM8450 UFS, USB2, USB3, PCIe0 and PCIe1 phy support
- Lan966x ethernet serdes PHY driver
- Support for uniphier NXI & Pro4 SoC
- Qualcomm SM6350 USB2 support
- Amlogic Meson8 HDMI TX PHY driver
- Rockchip rk3568 usb2 support
- Intel Thunder Bay eMMC PHY driver
- Freescale IMX8 PCIe phy driver
- Updates:
- Cadence Sierra driver updates for multilink configurations
- Bcm usb2 updates for Phy reg space
* tag 'phy-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (72 commits)
phy: cadence: Sierra: Add support for derived reference clock output
dt-bindings: phy: cadence-sierra: Add clock ID for derived reference clock
phy: cadence: Sierra: Add PCIe + QSGMII PHY multilink configuration
phy: cadence: Sierra: Add support for PHY multilink configurations
phy: cadence: Sierra: Fix to get correct parent for mux clocks
phy: cadence: Sierra: Update single link PCIe register configuration
phy: cadence: Sierra: Check PIPE mode PHY status to be ready for operation
phy: cadence: Sierra: Check cmn_ready assertion during PHY power on
phy: cadence: Sierra: Add PHY PCS common register configurations
phy: cadence: Sierra: Rename some regmap variables to be in sync with Sierra documentation
phy: cadence: Sierra: Add support to get SSC type from device tree
dt-bindings: phy: cadence-sierra: Add binding to specify SSC mode
dt-bindings: phy: cadence-torrent: Rename SSC macros to use generic names
phy: cadence: Sierra: Prepare driver to add support for multilink configurations
phy: cadence: Sierra: Use of_device_get_match_data() to get driver data
phy: mediatek: Fix missing check in mtk_mipi_tx_probe
phy: uniphier-usb3ss: fix unintended writing zeros to PHY register
phy: phy-mtk-tphy: use new io helpers to access register
phy: phy-mtk-xsphy: use new io helpers to access register
phy: mediatek: add helpers to update bits of registers
...
|
|
Allow serdev device drivers get notified by hardware errors such as BREAK,
FRAME, PARITY and OVERRUN.
With this patch, in the event of an error detected in the UART device driver
the serdev_device_driver will get the newly introduced ->error() callback
invoked if serdev_device_set_error_mask() has previously been used to enable
the type of error. The errors are taken straight from the TTY layer and fed
into the serdev_device_driver after filtering out only enabled errors.
Without this patch the hardware errors never reach the serdev_device_driver.
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Link: https://lore.kernel.org/r/163931528842.27756.3665040315954968747.sendpatchset@octo
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
struct uart_8250_port contains mcr_mask and mcr_force members whose
sole purpose is to work around an Alpha-specific quirk. This code
doesn't belong in the core where it is executed by everyone else,
so move it to a proper ->set_mctrl callback which is used on the
affected Alpha machine only.
The quirk was introduced in January 1995:
https://git.kernel.org/pub/scm/linux/kernel/git/history/history.git/diff/drivers/char/serial.c?h=1.1.83
The members in struct uart_8250_port were added in 2002:
https://git.kernel.org/history/history/c/4524aad27854
The quirk applies to non-PCI Alphas and arch/alpha/Kconfig specifies
"select FORCE_PCI if !ALPHA_JENSEN". So apparently the only affected
machine is the EISA-based Jensen that Linus was working on back then:
https://lore.kernel.org/all/CAHk-=wj1JWZ3sCrGz16nxEj7=0O+srMg6Ah3iPTDXSPKEws_SA@mail.gmail.com/
Up until now the quirk is not applied unless CONFIG_PCI is disabled.
If users forget to do that or run a generic Alpha kernel, the serial
ports aren't usable on Jensen. Avoid by confining the quirk to
CONFIG_ALPHA_JENSEN instead of !CONFIG_PCI. On generic Alpha kernels,
auto-detect at runtime whether the quirk needs to be applied.
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Ulrich Teichert <krypton@ulrich-teichert.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Link: https://lore.kernel.org/r/b83d069cb516549b8a5420e097bb6bdd806f36fc.1640695609.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There are no more users for the function.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20211223082432.45653-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Instead of trying to keep track of the connections to the
USB Type-C connectors separately, letting the component
framework take care of that.
From now on every USB Type-C connector will register itself
as "aggregate" - component master - and anything that can be
connected to it inside the system can then simply register
itself as a generic component.
The matching of the components and the connector shall rely
on ACPI _PLD initially. Before registering itself as the
aggregate, the connector will find all other ACPI devices
that have matching _PLD crc hash with it (matching value in
the pld_crc member of struct acpi_device), and add a
component match entry for each one of them. Because only
ACPI is supported for now, the driver shall only be build
when ACPI is supported.
This removes the need for the custom API that the driver
exposed. The components and the connector can therefore
exist completely independently of each other. The order in
which they are registered, as well as are they modules or
not, is now irrelevant.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20211223082422.45637-1-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Storing CRC-32 hash of the Physical Location of Device
object (_PLD) with devices that have it. The hash is stored
to a new struct acpi_device member "pld_crc".
The hash makes it easier to find devices that share a
location, as there is no need to evaluate the entire object
every time. Knowledge about devices that share a location
can be used in device drivers that need to know the
connections to other components inside a system. USB3 ports
will for example always share their location with a USB2
port.
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20211223081620.45479-3-heikki.krogerus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
netns/bpf.h gets included by netdevice.h (thru net_namespace.h)
which in turn gets included in a lot of places. We should keep
netns/bpf.h as light-weight as possible.
bpf-netns.h seems to contain more implementation details than
deserves to be included in a netns header. It needs to pull in
uapi/bpf.h to get various enum types.
Move enum netns_bpf_attach_type to netns/bpf.h and invert the
dependency. This makes netns/bpf.h fit the mold of a struct
definition header more clearly, and drops the number of objects
rebuilt when uapi/bpf.h is touched from 7.7k to 1.1k.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211230012742.770642-3-kuba@kernel.org
|
|
Add missing includes unmasked by the subsequent change.
Mostly network drivers missing an include for XDP_PACKET_HEADROOM.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211230012742.770642-2-kuba@kernel.org
|
|
Other maps like hashmaps are already available to sleepable programs.
Sleepable BPF programs run under trace RCU. Allow task, sk and inode
storage to be used from sleepable programs. This allows sleepable and
non-sleepable programs to provide shareable annotations on kernel
objects.
Sleepable programs run in trace RCU where as non-sleepable programs run
in a normal RCU critical section i.e. __bpf_prog_enter{_sleepable}
and __bpf_prog_exit{_sleepable}) (rcu_read_lock or rcu_read_lock_trace).
In order to make the local storage maps accessible to both sleepable
and non-sleepable programs, one needs to call both
call_rcu_tasks_trace and call_rcu to wait for both trace and classical
RCU grace periods to expire before freeing memory.
Paul's work on call_rcu_tasks_trace allows us to have per CPU queueing
for call_rcu_tasks_trace. This behaviour can be achieved by setting
rcupdate.rcu_task_enqueue_lim=<num_cpus> boot parameter.
In light of these new performance changes and to keep the local storage
code simple, avoid adding a new flag for sleepable maps / local storage
to select the RCU synchronization (trace / classical).
Also, update the dereferencing of the pointers to use
rcu_derference_check (with either the trace or normal RCU locks held)
with a common bpf_rcu_lock_held helper method.
Signed-off-by: KP Singh <kpsingh@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20211224152916.1550677-2-kpsingh@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
- Add support for Foxconn MT7922A
- Add support for Realtek RTL8852AE
- Rework HCI event handling to use skb_pull_data
* tag 'for-net-next-2021-12-29' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (62 commits)
Bluetooth: MGMT: Fix spelling mistake "simultanous" -> "simultaneous"
Bluetooth: vhci: Set HCI_QUIRK_VALID_LE_STATES
Bluetooth: MGMT: Fix LE simultaneous roles UUID if not supported
Bluetooth: hci_sync: Add check simultaneous roles support
Bluetooth: hci_sync: Wait for proper events when connecting LE
Bluetooth: hci_sync: Add support for waiting specific LE subevents
Bluetooth: hci_sync: Add hci_le_create_conn_sync
Bluetooth: hci_event: Use skb_pull_data when processing inquiry results
Bluetooth: hci_sync: Push sync command cancellation to workqueue
Bluetooth: hci_qca: Stop IBS timer during BT OFF
Bluetooth: btusb: Add support for Foxconn MT7922A
Bluetooth: btintel: Add missing quirks and msft ext for legacy bootloader
Bluetooth: btusb: Add two more Bluetooth parts for WCN6855
Bluetooth: L2CAP: Fix using wrong mode
Bluetooth: hci_sync: Fix not always pausing advertising when necessary
Bluetooth: mgmt: Make use of mgmt_send_event_skb in MGMT_EV_DEVICE_CONNECTED
Bluetooth: mgmt: Make use of mgmt_send_event_skb in MGMT_EV_DEVICE_FOUND
Bluetooth: mgmt: Introduce mgmt_alloc_skb and mgmt_send_event_skb
Bluetooth: btusb: Return error code when getting patch status failed
Bluetooth: btusb: Handle download_firmware failure cases
...
====================
Link: https://lore.kernel.org/r/20211229211258.2290966-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
As we defined the new hwtstamp_config flag HWTSTAMP_FLAG_BONDED_PHC_INDEX
as enum, it's not easy for userspace program to check if the flag is
supported when build.
Let's define the new flag so user space could build it on old kernel with
ifdef check.
Fixes: 9c9211a3fc7a ("net_tstamp: add new flag HWTSTAMP_FLAG_BONDED_PHC_INDEX")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
sock.h is pretty heavily used (5k objects rebuilt on x86 after
it's touched). We can drop the include of filter.h from it and
add a forward declaration of struct sk_filter instead.
This decreases the number of rebuilt objects when bpf.h
is touched from ~5k to ~1k.
There's a lot of missing includes this was masking. Primarily
in networking tho, this time.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/bpf/20211229004913.513372-1-kuba@kernel.org
|
|
Register values in NTXEC are big-endian on the I2C bus, but the regmap
subsystem handles the conversion between CPU-endian and big-endian data
internally. ntxec_reg8 should thus return u16, not __be16.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Link: https://lore.kernel.org/r/20211218152553.744615-1-j.neuschaefer@gmx.net
|
|
into drm-next
* dpu plane state cleanup in prep for multirect
* dpu debugfs cleanup (and moving things to atomic_print_state) in prep
for multirect
* dp support for sc7280
* struct_mutex removal
* include more GMU state in gpu devcore dumps
* add support for a506
* remove old eDP sub-driver (never was used in any upstream supported
devices and modern things with eDP will use DP sub-driver instead)
* debugfs to disable hw gpu hang detect for (igt tests)
* debugfs for dumping display hw state
* and the usual assortment of cleanup and bug fixes
There still seems to be a timing issue with dpu, showing up on sc7180
devices, after the bridge probe-order change. Ie. things work great if
loglevel is high enough (or enough debug options are enabled, etc).
We'll continue to debug this in the new year.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGs+vwr0nkwgYzuYAsCoHtypWpWav+yVvLZGsEJy8tJ56A@mail.gmail.com
|
|
The percpu variables hyperv_pcpu_input_arg and hyperv_pcpu_output_arg
have been incorrectly defined since their inception. The __percpu
qualifier should be associated with the void * (i.e., a pointer), not
with the target of the pointer. This distinction makes no difference
to gcc and the generated code, but sparse correctly complains. Fix
the definitions in the interest of general correctness in addition
to making sparse happy.
No functional change.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/1640662315-22260-1-git-send-email-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
The BCM7038 watchdog driver needs to be able to obtain a specific clock
name on BCM63xx platforms which is the "periph" clock ticking at 50MHz.
make it possible to specify the clock name to obtain via platform data.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20211112224636.395101-4-f.fainelli@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
|
|
There is no need to pass the pointer to the kset in the struct
kset_uevent_ops callbacks as no one uses it, so just remove that pointer
entirely.
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Wedson Almeida Filho <wedsonaf@google.com>
Link: https://lore.kernel.org/r/20211227163924.3970661-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI fix from Ard Biesheuvel:
"Another EFI fix for v5.16:
- Prevent missing prototype warning from breaking the build under
CONFIG_WERROR=y"
* tag 'efi-urgent-for-v5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: Move efifb_setup_from_dmi() prototype from arch headers
|
|
This driver allows user space to fetch telemetry data from the
firmware with the help of the Platform Firmware Runtime Telemetry
interface.
Both PFRU and PFRT are based on ACPI _DSM interfaces located under
special device objects in the ACPI Namespace, but these interfaces
are different from each other, so it is better to provide a separate
driver from each of them, even though they share some common
definitions and naming conventions.
Tested-by: Hongyu Ning <hongyu.ning@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Introduce the pfr_update driver which can be used for Platform Firmware
Runtime code injection and driver update [1].
The user is expected to provide the EFI capsule, and pass it to the
driver by writing the capsule to a device special file. The capsule
is transferred by the driver to the platform firmware with the help
of an ACPI _DSM method under the special ACPI Platform Firmware
Runtime Update device (INTC1080), and the actual firmware update is
carried out by the low-level Management Mode code in the platform
firmware.
This change allows certain pieces of the platform firmware to be
updated on the fly while the system is running (runtime) without the
need to restart it, which is key in the cases when the system needs to
be available 100% of the time and it cannot afford the downtime related
to restarting it, or when the work carried out by the system is
particularly important, so it cannot be interrupted, and it is not
practical to wait until it is complete.
Link: https://uefi.org/sites/default/files/resources/Intel_MM_OS_Interface_Spec_Rev100.pdf # [1]
Tested-by: Hongyu Ning <hongyu.ning@intel.com>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
structures
Platform Firmware Runtime Update image starts with UEFI headers, and the
headers are defined in UEFI specification, but some of them have not been
defined in the kernel yet.
For example, the header layout of a capsule file looks like this:
EFI_CAPSULE_HEADER
EFI_FIRMWARE_MANAGEMENT_CAPSULE_HEADER
EFI_FIRMWARE_MANAGEMENT_CAPSULE_IMAGE_HEADER
EFI_FIRMWARE_IMAGE_AUTHENTICATION
These structures would be used by the Platform Firmware Runtime Update
driver to parse the format of capsule file to verify if the corresponding
version number is valid. In this way, if the user provides an invalid
capsule image, the kernel could be used as a guard to reject it, without
switching to the Management Mode (which might be costly).
EFI_CAPSULE_HEADER has been defined in the kernel, but the other
structures have not been defined yet, so do that. Besides,
EFI_FIRMWARE_MANAGEMENT_CAPSULE_HEADER and
EFI_FIRMWARE_MANAGEMENT_CAPSULE_IMAGE_HEADER are required to be packed
in the uefi specification. For this reason, use the __packed attribute
to indicate to the compiler that the entire structure can appear
misaligned in memory (as suggested by Ard) in case one of them follows
the other directly in a capsule header.
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit 90088defcb99e122edf41038ae5c901206c86dc9
Version 20211217.
Link: https://github.com/acpica/acpica/commit/90088def
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit 26f8c721fb01e4a26eec8c85dffcbe950d5e61a9
Add support for optional "Specific Data" field for the optional
Linux-specific structure that appears at the end of an Endpoint
Descriptor.
Link: https://github.com/acpica/acpica/commit/26f8c721
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit cf36a6d658ca5aa8c329c2edfc3322c095ffd844
Add support for Arm Generic Diagnostic Dump and Reset Interface, which is
described by "ACPI for Arm Components 1.1 Platform Design Document"
ARM DEN0093.
Add the necessary types in the ACPICA header files and support for
compiling and decompiling the table.
Link: https://github.com/acpica/acpica/commit/cf36a6d6
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit 403f9965aba7ff9d2ed5b41bbffdd2a1ed0f596f
Added struct acpi_pcc_info to acpi_src.
Link: https://github.com/acpica/acpica/commit/403f9965
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit 55526e8a6133cbf5a9cc0fb75a95dbbac6eb98e6
PCC Opregion added in ACPIC 6.3 requires special context data similar
to GPIO and Generic Serial Bus as it needs to know the internal PCC
buffer and its length as well as the PCC channel index when the opregion
handler is being executed by the OSPM.
Lets add support for the special context data needed by PCC Opregion.
Link: https://github.com/acpica/acpica/commit/55526e8a
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
ACPICA commit 13b9327761955f6e1e5dbf748b3112940c0dc539
The byte length of the Data field in the AEST Processor generic resource
substructure defined in ACPI for the Armv8 RAS Extensions 1.1 is 4Byte.
However, it is defined as a pointer type, and on a 64-bit machine,
it is interpreted as 8 bytes. Therefore, it is changed from a pointer
type unsigned integer 1 byte to an unsigned integer 4 bytes.
Link: https://github.com/acpica/acpica/commit/13b93277
Signed-off-by: Shuuichirou Ishii <ishii.shuuichir@fujitsu.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
