summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2024-12-20Merge tag 'renesas-dts-for-v6.14-tag1' of ↵Arnd Bergmann
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt Renesas DTS updates for v6.14 - Add more serial (SCIF), power monitor, ADC, and sound support for the RZ/G3S SoC and the RZ/G3S SMARC SoM and development board, - Add support for the R-Car V4H ES3.0 (R8A779G3) SoC on the White Hawk Single development board, - Add display support for the R-Car V4M SoC and the Gray Hawk Single development board, - Add video capture support for the Gray Hawk Single development board, - Add initial support for the RZ/G3E (R9A09G047) SoC and the RZ/G3E SMARC SoM and Carrier-II EVK development board, - Add support for 5-port MATEnet on the Falcon Ethernet sub-board, - Miscellaneous fixes and improvements. * tag 'renesas-dts-for-v6.14-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (33 commits) arm64: dts: renesas: r9a09g047: Add I2C nodes arm64: dts: renesas: rzg3s-smarc: Add sound card arm64: dts: renesas: rzg3s-smarc: Enable SSI3 arm64: dts: renesas: Add da7212 audio codec node arm64: dts: renesas: rzg3s-smarc-som: Add versa3 clock generator node arm64: dts: renesas: r9a08g045: Add SSI nodes arm64: dts: renesas: rzg3s-smarc-som: Enable ADC arm64: dts: renesas: r9a08g045: Add ADC node arm64: dts: renesas: Add initial device tree for RZ/G3E SMARC EVK board arm64: dts: renesas: Add initial support for RZ/G3E SMARC SoM arm64: dts: renesas: r9a09g047: Add OPP table arm64: dts: renesas: Add initial DTSI for RZ/G3E SoC arm64: dts: renesas: falcon-ethernet: Describe PHYs connected on the breakout board arm64: dts: renesas: r8a779a0: Remove address- and size-cells from AVB[1-5] dt-bindings: clock: renesas: Document RZ/G3E SoC CPG dt-bindings: soc: renesas: Document RZ/G3E SMARC SoM and Carrier-II EVK dt-bindings: soc: renesas: Document Renesas RZ/G3E SoC variants arm64: dts: renesas: gray-hawk-single: Add video capture support arm64: dts: renesas: gray-hawk-single: Add DisplayPort support arm64: dts: renesas: r8a779h0: Add display support ... Link: https://lore.kernel.org/r/cover.1734689803.git.geert+renesas@glider.be Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-12-20sched/wake_q: Add helper to call wake_up_q after unlock with preemption disabledJohn Stultz
A common pattern seen when wake_qs are used to defer a wakeup until after a lock is released is something like: preempt_disable(); raw_spin_unlock(lock); wake_up_q(wake_q); preempt_enable(); So create some raw_spin_unlock*_wake() helper functions to clean this up. Applies on top of the fix I submitted here: https://lore.kernel.org/lkml/20241212222138.2400498-1-jstultz@google.com/ NOTE: I recognise the unlock()/unlock_irq()/unlock_irqrestore() variants creates its own duplication, which we could use a macro to generate the similar functions, but I often dislike how those generation macros making finding the actual implementation harder, so I left the three functions as is. If folks would prefer otherwise, let me know and I'll switch it. Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: John Stultz <jstultz@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20241217040803.243420-1-jstultz@google.com
2024-12-20sched: Move sched domain name out of CONFIG_SCHED_DEBUGSwapnil Sapkal
/proc/schedstat file shows cpu and sched domain level scheduler statistics. It does not show domain name instead shows domain level. It will be very useful for tools like `perf sched stats`[1] to aggragate domain level stats if domain names are shown in /proc/schedstat. But sched domain name is guarded by CONFIG_SCHED_DEBUG. As per the discussion[2], move sched domain name out of CONFIG_SCHED_DEBUG. [1] https://lore.kernel.org/lkml/20241122084452.1064968-1-swapnil.sapkal@amd.com/ [2] https://lore.kernel.org/lkml/fcefeb4d-3acb-462d-9c9b-3df8d927e522@amd.com/ Suggested-by: "Gautham R. Shenoy" <gautham.shenoy@amd.com> Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20241220063224.17767-5-swapnil.sapkal@amd.com
2024-12-20sched: Report the different kinds of imbalances in /proc/schedstatSwapnil Sapkal
In /proc/schedstat, lb_imbalance reports the sum of imbalances discovered in sched domains with each call to sched_balance_rq(), which is not very useful because lb_imbalance does not mention whether the imbalance is due to load, utilization, nr_tasks or misfit_tasks. Remove this field from /proc/schedstat. Currently there is no field in /proc/schedstat to report different types of imbalances. Introduce new fields in /proc/schedstat to report the total imbalances in load, utilization, nr_tasks or misfit_tasks. Added fields to /proc/schedstat: - lb_imbalance_load: Total imbalance due to load. - lb_imbalance_util: Total imbalance due to utilization. - lb_imbalance_task: Total imbalance due to number of tasks. - lb_imbalance_misfit: Total imbalance due to misfit tasks. Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com> Link: https://lore.kernel.org/r/20241220063224.17767-4-swapnil.sapkal@amd.com
2024-12-20sched/fair: Fix value reported by hot tasks pulled in /proc/schedstatPeter Zijlstra
In /proc/schedstat, lb_hot_gained reports the number hot tasks pulled during load balance. This value is incremented in can_migrate_task() if the task is migratable and hot. After incrementing the value, load balancer can still decide not to migrate this task leading to wrong accounting. Fix this by incrementing stats when hot tasks are detached. This issue only exists in detach_tasks() where we can decide to not migrate hot task even if it is migratable. However, in detach_one_task(), we migrate it unconditionally. [Swapnil: Handled the case where nr_failed_migrations_hot was not accounted properly and wrote commit log] Fixes: d31980846f96 ("sched: Move up affinity check to mitigate useless redoing overhead") Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reported-by: "Gautham R. Shenoy" <gautham.shenoy@amd.com> Not-yet-signed-off-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20241220063224.17767-2-swapnil.sapkal@amd.com
2024-12-20Merge branch 'linus' into x86/mm, to pick up fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2024-12-19xsk: add generic XSk &xdp_buff -> skb conversionAlexander Lobakin
Same as with converting &xdp_buff to skb on Rx, the code which allocates a new skb and copies the XSk frame there is identical across the drivers, so make it generic. This includes copying all the frags if they are present in the original buff. System percpu page_pools greatly improve XDP_PASS performance on XSk: instead of page_alloc() + page_free(), the net core recycles the same pages, so the only overhead left is memcpy()s. When the Page Pool is not compiled in, the whole function is a return-NULL (but it always gets selected when eBPF is enabled). Note that the passed buff gets freed if the conversion is done w/o any error, assuming you don't need this buffer after you convert it to an skb. Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Link: https://patch.msgid.link/20241218174435.1445282-6-aleksander.lobakin@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19xsk: make xsk_buff_add_frag() really add the frag via __xdp_buff_add_frag()Alexander Lobakin
Currently, xsk_buff_add_frag() only adds the frag to pool's linked list, not doing anything with the &xdp_buff. The drivers do that manually and the logic is the same. Make it really add an skb frag, just like xdp_buff_add_frag() does that, and freeing frags on error if needed. This allows to remove repeating code from i40e and ice and not add the same code again and again. Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Link: https://patch.msgid.link/20241218174435.1445282-5-aleksander.lobakin@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19xdp: add generic xdp_build_skb_from_buff()Alexander Lobakin
The code which builds an skb from an &xdp_buff keeps multiplying itself around the drivers with almost no changes. Let's try to stop that by adding a generic function. Unlike __xdp_build_skb_from_frame(), always allocate an skbuff head using napi_build_skb() and make use of the available xdp_rxq pointer to assign the Rx queue index. In case of PP-backed buffer, mark the skb to be recycled, as every PP user's been switched to recycle skbs. Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Link: https://patch.msgid.link/20241218174435.1445282-4-aleksander.lobakin@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19xdp: add generic xdp_buff_add_frag()Alexander Lobakin
The code piece which would attach a frag to &xdp_buff is almost identical across the drivers supporting XDP multi-buffer on Rx. Make it a generic elegant "oneliner". Also, I see lots of drivers calculating frags_truesize as `xdp->frame_sz * nr_frags`. I can't say this is fully correct, since frags might be backed by chunks of different sizes, especially with stuff like the header split. Even page_pool_alloc() can give you two different truesizes on two subsequent requests to allocate the same buffer size. Add a field to &skb_shared_info (unionized as there's no free slot currently on x86_64) to track the "true" truesize. It can be used later when updating the skb. Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Link: https://patch.msgid.link/20241218174435.1445282-3-aleksander.lobakin@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19page_pool: add page_pool_dev_alloc_netmem()Alexander Lobakin
Similarly to other _dev shorthands, add one for page_pool_alloc_netmem() to allocate a netmem using the default Rx GFP flags (ATOMIC | NOWARN) to make the page -> netmem transition of drivers easier. Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com> Link: https://patch.msgid.link/20241218174435.1445282-2-aleksander.lobakin@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19gre: Drop ip_route_output_gre().Guillaume Nault
We already have enough variants of ip_route_output*() functions. We don't need a GRE specific one in the generic route.h header file. Furthermore, ip_route_output_gre() is only used once, in ipgre_open(), where it can be easily replaced by a simple call to ip_route_output_key(). While there, and for clarity, explicitly set .flowi4_scope to RT_SCOPE_UNIVERSE instead of relying on the implicit zero initialisation. Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/ab7cba47b8558cd4bfe2dc843c38b622a95ee48e.1734527729.git.gnault@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19net: phy: add phy_disable_eeeHeiner Kallweit
If a MAC driver doesn't support EEE, then the PHY shouldn't advertise it. Add phy_disable_eee() for this purpose. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/fd51738c-dcd6-4d61-b8c5-faa6ac0f1026@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19Merge tag 'wireless-next-2024-12-19' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.14 Multi-Link Operation implementation continues, both in stack and in drivers. Otherwise it has been relatively quiet. Major changes: cfg80211/mac80211 - define wiphy guard - get TX power per link - EHT 320 MHz channel support for mesh ath11k - QCA6698AQ support ath9k - RX inactivity detection rtl8xxxu - add more USB device IDs rtw88 - add more USB device IDs - enable USB RX aggregation and USB 3 to improve performance rtw89 - PowerSave flow for Multi-Link Operation * tag 'wireless-next-2024-12-19' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (121 commits) wifi: wlcore: sysfs: constify 'struct bin_attribute' wifi: brcmfmac: clarify unmodifiable headroom log message wifi: brcmfmac: add missing header include for brcmf_dbg wifi: brcmsmac: add gain range check to wlc_phy_iqcal_gainparams_nphy() wifi: qtnfmac: fix spelling error in core.h wifi: rtw89: phy: add dummy C2H event handler for report of TAS power wifi: rtw89: 8851b: rfk: remove unnecessary assignment of return value of _dpk_dgain_read() wifi: rtw89: 8852c: rfk: refine target channel calculation in _rx_dck_channel_calc() wifi: rtlwifi: pci: wait for firmware loading before releasing memory wifi: rtlwifi: fix memory leaks and invalid access at probe error path wifi: rtlwifi: destroy workqueue at rtl_deinit_core wifi: rtlwifi: remove unused check_buddy_priv wifi: rtw89: 8922a: update format of RFK pre-notify H2C command v2 wifi: rtw89: regd: update regulatory map to R68-R51 wifi: rtw89: 8852c: disable ER SU when 4x HE-LTF and 0.8 GI capability differ wifi: rtw89: disable firmware training HE GI and LTF wifi: rtw89: ps: update data for firmware and settings for hardware before/after PS wifi: rtw89: ps: refactor channel info to firmware before entering PS wifi: rtw89: ps: refactor PS flow to support MLO wifi: mwifiex: decrease timeout waiting for host sleep from 10s to 5s ... ==================== Link: https://patch.msgid.link/20241219185709.774EDC4CECE@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-20Merge tag 'drm-misc-next-2024-12-19' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next drm-misc-next for 6.14: UAPI Changes: Cross-subsystem Changes: Core Changes: - connector: Add a mutex to protect ELD access, Add a helper to create a connector in two steps Driver Changes: - amdxdna: Add RyzenAI-npu6 Support, various improvements - rcar-du: Add r8a779h0 Support - rockchip: various improvements - zynqmp: Add DP audio support - bridges: - ti-sn65dsi83: Add ti,lvds-vod-swing optional properties - panels: - new panels: Tianma TM070JDHG34-00, Multi-Inno Technology MI1010Z1T-1CP11 Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <mripard@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241219-truthful-demonic-hound-598f63@houat
2024-12-19ACPI: bus: implement acpi_device_hid when !ACPIRicardo Ribalda
Provide an implementation of acpi_device_hid that can be used when CONFIG_ACPI is not set. Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Link: https://patch.msgid.link/20241216-fix-ipu-v5-6-3d6b35ddce7b@chromium.org Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-12-19ACPI: bus: implement for_each_acpi_consumer_dev when !ACPIRicardo Ribalda
Provide an implementation of for_each_acpi_consumer_dev that can be use used when CONFIG_ACPI is not set. The expression `false && supplier` is used to avoid "variable not used" warnings. Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Link: https://patch.msgid.link/20241216-fix-ipu-v5-5-3d6b35ddce7b@chromium.org Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-12-19ACPI: header: implement acpi_device_handle when !ACPIRicardo Ribalda
Provide an implementation of acpi_device_handle that can be used when CONFIG_ACPI is not set. Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Link: https://patch.msgid.link/20241216-fix-ipu-v5-4-3d6b35ddce7b@chromium.org Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-12-19ACPI: bus: implement acpi_get_physical_device_location when !ACPIRicardo Ribalda
Provide an implementation of acpi_get_physical_device_location that can be used when CONFIG_ACPI is not set. Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Link: https://patch.msgid.link/20241216-fix-ipu-v5-3-3d6b35ddce7b@chromium.org Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-12-19ACPI: bus: implement for_each_acpi_dev_match when !ACPIRicardo Ribalda
Provide an implementation of for_each_acpi_dev_match that can be used when CONFIG_ACPI is not set. The condition `false && hid && uid && hrv` is used to avoid "variable not used" warnings. Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Link: https://patch.msgid.link/20241216-fix-ipu-v5-2-3d6b35ddce7b@chromium.org Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-12-19ACPI: bus: change the prototype for acpi_get_physical_device_locationRicardo Ribalda
It generally is not OK to use acpi_status and/or AE_ error codes without CONFIG_ACPI and they really only should be used in drivers/acpi/ (and not everywhere in there for that matter). So acpi_get_physical_device_location() needs to be redefined to return something different from acpi_status (preferably bool) in order to be used in !CONFIG_ACPI code. Suggested-by: Rafael J. Wysocki <rafael@kernel.org> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Link: https://patch.msgid.link/20241216-fix-ipu-v5-1-3d6b35ddce7b@chromium.org Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-12-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.13-rc4). No conflicts. Adjacent changes: drivers/net/ethernet/renesas/rswitch.h 32fd46f5b69e ("net: renesas: rswitch: remove speed from gwca structure") 922b4b955a03 ("net: renesas: rswitch: rework ts tags management") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19drm: make drm-active- stats optionalYunxiang Li
When memory stats is generated fresh everytime by going though all the BOs, their active information is quite easy to get. But if the stats are tracked with BO's state this becomes harder since the job scheduling part doesn't really deal with individual buffers. Make drm-active- optional to enable amdgpu to switch to the second method. Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241219151411.1150-3-Yunxiang.Li@amd.com Signed-off-by: Christian König <christian.koenig@amd.com>
2024-12-19drm: add drm_memory_stats_is_zeroYunxiang Li
Add a helper to check if the memory stats is zero, this will be used to check for memory accounting errors. Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241219151411.1150-2-Yunxiang.Li@amd.com Signed-off-by: Christian König <christian.koenig@amd.com>
2024-12-19tracing: ipv6: Add flow label to fib6_table_lookup tracepointIdo Schimmel
The different parameters affecting the IPv6 route lookup are printed to the trace buffer by the fib6_table_lookup tracepoint. Add the IPv6 flow label for better observability as it can affect the route lookup both in terms of multipath hash calculation and policy based routing (FIB rules). Example: # echo 1 > /sys/kernel/tracing/events/fib6/fib6_table_lookup/enable # ip -6 route get ::1 flowlabel 0x12345 ipproto udp sport 12345 dport 54321 &> /dev/null # cat /sys/kernel/tracing/trace_pipe ip-358 [010] ..... 44.897484: fib6_table_lookup: table 255 oif 0 iif 1 proto 17 ::/12345 -> ::1/54321 flowlabel 0x12345 tos 0 scope 0 flags 0 ==> dev lo gw :: err 0 Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-19ipv6: Add flow label to route get requestsIdo Schimmel
The default IPv6 multipath hash policy takes the flow label into account when calculating a multipath hash and previous patches added a flow label selector to IPv6 FIB rules. Allow user space to specify a flow label in route get requests by adding a new netlink attribute and using its value to populate the "flowlabel" field in the IPv6 flow info structure prior to a route lookup. Deny the attribute in RTM_{NEW,DEL}ROUTE requests by checking for it in rtm_to_fib6_config() and returning an error if present. A subsequent patch will use this capability to test the new flow label selector in IPv6 FIB rules. Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-19net: fib_rules: Add flow label selector attributesIdo Schimmel
Add new FIB rule attributes which will allow user space to match on the IPv6 flow label with a mask. Temporarily set the type of the attributes to 'NLA_REJECT' while support is being added in the IPv6 code. Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-19mmc: crypto: add mmc_from_crypto_profile()Eric Biggers
Add a helper function that encapsulates a container_of expression. For now there is just one user but soon there will be more. Signed-off-by: Eric Biggers <ebiggers@google.com> Message-ID: <20241213041958.202565-7-ebiggers@kernel.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-12-19Merge tag 'kvm-selftests-treewide-6.14' of https://github.com/kvm-x86/linux ↵Paolo Bonzini
into HEAD KVM selftests "tree"-wide changes for 6.14: - Rework vcpu_get_reg() to return a value instead of using an out-param, and update all affected arch code accordingly. - Convert the max_guest_memory_test into a more generic mmu_stress_test. The basic gist of the "conversion" is to have the test do mprotect() on guest memory while vCPUs are accessing said memory, e.g. to verify KVM and mmu_notifiers are working as intended. - Play nice with treewrite builds of unsupported architectures, e.g. arm (32-bit), as KVM selftests' Makefile doesn't do anything to ensure the target architecture is actually one KVM selftests supports. - Use the kernel's $(ARCH) definition instead of the target triple for arch specific directories, e.g. arm64 instead of aarch64, mainly so as not to be different from the rest of the kernel.
2024-12-19media: v4l: fwnode: Parse MiPI DisCo for C-PHY line-ordersNiklas Söderlund
Extend the fwnode parsing to validate and fill in the CSI-2 C-PHY line-orders order properties as defined in MIPI Discovery and Configuration (DisCo) Specification for Imaging. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> [Sakari Ailus: Use ARRAY_SIZE() instead of an integer.] Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2024-12-19media: dt-bindings: Add property to describe CSI-2 C-PHY line ordersNiklas Söderlund
Each data lane on a CSI-2 C-PHY bus uses three phase encoding and is constructed from three physical wires. The wires are referred to as A, B and C and their default order is ABC. However to ease hardware design the specification allows for the wires to be switched in any order. Add a vendor neutral property to describe the line order used. The property name 'line-orders', the possible values it can be assigned and there names are taken from the MIPI Discovery and Configuration (DisCo) Specification for Imaging. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2024-12-18Merge branch '100GbE' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== ice: add support for devlink health events Przemek Kitszel says: Reports for two kinds of events are implemented, Malicious Driver Detection (MDD) and Tx hang. Patches 1, 2, 3: core improvements (checkpatch.pl, devlink extension) Patch 4: rename current ice devlink/ files Patches 5, 6, 7: ice devlink health infra + reporters Mateusz did good job caring for this series, and hardening the code. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ice: Add MDD logging via devlink health ice: add Tx hang devlink health reporter ice: rename devlink_port.[ch] to port.[ch] devlink: add devlink_fmsg_dump_skb() function devlink: add devlink_fmsg_put() macro checkpatch: don't complain on _Generic() use ==================== Link: https://patch.msgid.link/20241217210835.3702003-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-18alloc_tag: fix set_codetag_empty() when !CONFIG_MEM_ALLOC_PROFILING_DEBUGSuren Baghdasaryan
It was recently noticed that set_codetag_empty() might be used not only to mark NULL alloctag references as empty to avoid warnings but also to reset valid tags (in clear_page_tag_ref()). Since set_codetag_empty() is defined as NOOP for CONFIG_MEM_ALLOC_PROFILING_DEBUG=n, such use of set_codetag_empty() leads to subtle bugs. Fix set_codetag_empty() for CONFIG_MEM_ALLOC_PROFILING_DEBUG=n to reset the tag reference. Link: https://lkml.kernel.org/r/20241130001423.1114965-2-surenb@google.com Fixes: a8fc28dad6d5 ("alloc_tag: introduce clear_page_tag_ref() helper function") Signed-off-by: Suren Baghdasaryan <surenb@google.com> Reported-by: David Wang <00107082@163.com> Closes: https://lore.kernel.org/lkml/20241124074318.399027-1-00107082@163.com/ Cc: David Wang <00107082@163.com> Cc: Kent Overstreet <kent.overstreet@linux.dev> Cc: Mike Rapoport (Microsoft) <rppt@kernel.org> Cc: Pasha Tatashin <pasha.tatashin@soleen.com> Cc: Sourav Panda <souravpanda@google.com> Cc: Yu Zhao <yuzhao@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-12-18mm/codetag: clear tags before swapDavid Wang
When CONFIG_MEM_ALLOC_PROFILING_DEBUG is set, kernel WARN would be triggered when calling __alloc_tag_ref_set() during swap: alloc_tag was not cleared (got tag for mm/filemap.c:1951) WARNING: CPU: 0 PID: 816 at ./include/linux/alloc_tag.h... Clear code tags before swap can fix the warning. And this patch also fix a potential invalid address dereference in alloc_tag_add_check() when CONFIG_MEM_ALLOC_PROFILING_DEBUG is set and ref->ct is CODETAG_EMPTY, which is defined as ((void *)1). Link: https://lkml.kernel.org/r/20241213013332.89910-1-00107082@163.com Fixes: 51f43d5d82ed ("mm/codetag: swap tags when migrate pages") Signed-off-by: David Wang <00107082@163.com> Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202412112227.df61ebb-lkp@intel.com Acked-by: Suren Baghdasaryan <surenb@google.com> Cc: Kent Overstreet <kent.overstreet@linux.dev> Cc: Yu Zhao <yuzhao@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-12-18mm/vmstat: fix a W=1 clang compiler warningBart Van Assche
Fix the following clang compiler warning that is reported if the kernel is built with W=1: ./include/linux/vmstat.h:518:36: error: arithmetic between different enumeration types ('enum node_stat_item' and 'enum lru_list') [-Werror,-Wenum-enum-conversion] 518 | return node_stat_name(NR_LRU_BASE + lru) + 3; // skip "nr_" | ~~~~~~~~~~~ ^ ~~~ Link: https://lkml.kernel.org/r/20241212213126.1269116-1-bvanassche@acm.org Fixes: 9d7ea9a297e6 ("mm/vmstat: add helpers to get vmstat item names for each enum type") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-12-18mm: convert partially_mapped set/clear operations to be atomicUsama Arif
Other page flags in the 2nd page, like PG_hwpoison and PG_anon_exclusive can get modified concurrently. Changes to other page flags might be lost if they are happening at the same time as non-atomic partially_mapped operations. Hence, make partially_mapped operations atomic. Link: https://lkml.kernel.org/r/20241212183351.1345389-1-usamaarif642@gmail.com Fixes: 8422acdc97ed ("mm: introduce a pageflag for partially mapped folios") Reported-by: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/all/e53b04ad-1827-43a2-a1ab-864c7efecf6e@redhat.com/ Signed-off-by: Usama Arif <usamaarif642@gmail.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Roman Gushchin <roman.gushchin@linux.dev> Cc: Barry Song <baohua@kernel.org> Cc: Domenico Cerasuolo <cerasuolodomenico@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matthew Wilcox <willy@infradead.org> Cc: Mike Rapoport (Microsoft) <rppt@kernel.org> Cc: Nico Pache <npache@redhat.com> Cc: Rik van Riel <riel@surriel.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Shakeel Butt <shakeel.butt@linux.dev> Cc: Yu Zhao <yuzhao@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-12-18mm: use clear_user_(high)page() for arch with special user folio handlingZi Yan
Some architectures have special handling after clearing user folios: architectures, which set cpu_dcache_is_aliasing() to true, require flushing dcache; arc, which sets cpu_icache_is_aliasing() to true, changes folio->flags to make icache coherent to dcache. So __GFP_ZERO using only clear_page() is not enough to zero user folios and clear_user_(high)page() must be used. Otherwise, user data will be corrupted. Fix it by always clearing user folios with clear_user_(high)page() when cpu_dcache_is_aliasing() is true or cpu_icache_is_aliasing() is true. Rename alloc_zeroed() to user_alloc_needs_zeroing() and invert the logic to clarify its intend. Link: https://lkml.kernel.org/r/20241209182326.2955963-2-ziy@nvidia.com Fixes: 5708d96da20b ("mm: avoid zeroing user movable page twice with init_on_alloc=1") Signed-off-by: Zi Yan <ziy@nvidia.com> Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Closes: https://lore.kernel.org/linux-mm/CAMuHMdV1hRp_NtR5YnJo=HsfgKQeH91J537Gh4gKk3PFZhSkbA@mail.gmail.com/ Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Alexander Potapenko <glider@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kees Cook <keescook@chromium.org> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Vineet Gupta <vgupta@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-12-18mm: introduce cpu_icache_is_aliasing() across all architecturesZi Yan
In commit eacd0e950dc2 ("ARC: [mm] Lazy D-cache flush (non aliasing VIPT)"), arc adds the need to flush dcache to make icache see the code page change. This also requires special handling for clear_user_(high)page(). Introduce cpu_icache_is_aliasing() to make MM code query special clear_user_(high)page() easier. This will be used by the following commit. Link: https://lkml.kernel.org/r/20241209182326.2955963-1-ziy@nvidia.com Fixes: 5708d96da20b ("mm: avoid zeroing user movable page twice with init_on_alloc=1") Signed-off-by: Zi Yan <ziy@nvidia.com> Suggested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Vlastimil Babka <vbabka@suse.cz> Cc: Alexander Potapenko <glider@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Kees Cook <keescook@chromium.org> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Vineet Gupta <vgupta@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-12-18mm: add RCU annotation to pte_offset_map(_lock)Petr Malat
RCU lock is taken by ___pte_offset_map() unless it returns NULL. Add this information to its inline callers to avoid sparse warning about context imbalance in pte_unmap(). Link: https://lkml.kernel.org/r/20241210000604.700710-1-oss@malat.biz Signed-off-by: Petr Malat <oss@malat.biz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-12-19Merge tag 'v6.13-rc3' into drm-nextDave Airlie
Backmerge linux 6.13-rc3 as amd next has some dependencies on fixes in it. Signed-off-by: Dave Airlie <airlied@redhat.com>
2024-12-18ptr_ring: do not block hard interrupts in ptr_ring_resize_multiple()Eric Dumazet
Jakub added a lockdep_assert_no_hardirq() check in __page_pool_put_page() to increase test coverage. syzbot found a splat caused by hard irq blocking in ptr_ring_resize_multiple() [1] As current users of ptr_ring_resize_multiple() do not require hard irqs being masked, replace it to only block BH. Rename helpers to better reflect they are safe against BH only. - ptr_ring_resize_multiple() to ptr_ring_resize_multiple_bh() - skb_array_resize_multiple() to skb_array_resize_multiple_bh() [1] WARNING: CPU: 1 PID: 9150 at net/core/page_pool.c:709 __page_pool_put_page net/core/page_pool.c:709 [inline] WARNING: CPU: 1 PID: 9150 at net/core/page_pool.c:709 page_pool_put_unrefed_netmem+0x157/0xa40 net/core/page_pool.c:780 Modules linked in: CPU: 1 UID: 0 PID: 9150 Comm: syz.1.1052 Not tainted 6.11.0-rc3-syzkaller-00202-gf8669d7b5f5d #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 RIP: 0010:__page_pool_put_page net/core/page_pool.c:709 [inline] RIP: 0010:page_pool_put_unrefed_netmem+0x157/0xa40 net/core/page_pool.c:780 Code: 74 0e e8 7c aa fb f7 eb 43 e8 75 aa fb f7 eb 3c 65 8b 1d 38 a8 6a 76 31 ff 89 de e8 a3 ae fb f7 85 db 74 0b e8 5a aa fb f7 90 <0f> 0b 90 eb 1d 65 8b 1d 15 a8 6a 76 31 ff 89 de e8 84 ae fb f7 85 RSP: 0018:ffffc9000bda6b58 EFLAGS: 00010083 RAX: ffffffff8997e523 RBX: 0000000000000000 RCX: 0000000000040000 RDX: ffffc9000fbd0000 RSI: 0000000000001842 RDI: 0000000000001843 RBP: 0000000000000000 R08: ffffffff8997df2c R09: 1ffffd40003a000d R10: dffffc0000000000 R11: fffff940003a000e R12: ffffea0001d00040 R13: ffff88802e8a4000 R14: dffffc0000000000 R15: 00000000ffffffff FS: 00007fb7aaf716c0(0000) GS:ffff8880b9300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa15a0d4b72 CR3: 00000000561b0000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> tun_ptr_free drivers/net/tun.c:617 [inline] __ptr_ring_swap_queue include/linux/ptr_ring.h:571 [inline] ptr_ring_resize_multiple_noprof include/linux/ptr_ring.h:643 [inline] tun_queue_resize drivers/net/tun.c:3694 [inline] tun_device_event+0xaaf/0x1080 drivers/net/tun.c:3714 notifier_call_chain+0x19f/0x3e0 kernel/notifier.c:93 call_netdevice_notifiers_extack net/core/dev.c:2032 [inline] call_netdevice_notifiers net/core/dev.c:2046 [inline] dev_change_tx_queue_len+0x158/0x2a0 net/core/dev.c:9024 do_setlink+0xff6/0x41f0 net/core/rtnetlink.c:2923 rtnl_setlink+0x40d/0x5a0 net/core/rtnetlink.c:3201 rtnetlink_rcv_msg+0x73f/0xcf0 net/core/rtnetlink.c:6647 netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2550 Fixes: ff4e538c8c3e ("page_pool: add a lockdep check for recycling in hardirq") Reported-by: syzbot+f56a5c5eac2b28439810@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/671e10df.050a0220.2b8c0f.01cf.GAE@google.com/T/ Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://patch.msgid.link/20241217135121.326370-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-18io_uring: Fix registered ring file refcount leakJann Horn
Currently, io_uring_unreg_ringfd() (which cleans up registered rings) is only called on exit, but __io_uring_free (which frees the tctx in which the registered ring pointers are stored) is also called on execve (via begin_new_exec -> io_uring_task_cancel -> __io_uring_cancel -> io_uring_cancel_generic -> __io_uring_free). This means: A process going through execve while having registered rings will leak references to the rings' `struct file`. Fix it by zapping registered rings on execve(). This is implemented by moving the io_uring_unreg_ringfd() from io_uring_files_cancel() into its callee __io_uring_cancel(), which is called from io_uring_task_cancel() on execve. This could probably be exploited *on 32-bit kernels* by leaking 2^32 references to the same ring, because the file refcount is stored in a pointer-sized field and get_file() doesn't have protection against refcount overflow, just a WARN_ONCE(); but on 64-bit it should have no impact beyond a memory leak. Cc: stable@vger.kernel.org Fixes: e7a6c00dc77a ("io_uring: add support for registering ring file descriptors") Signed-off-by: Jann Horn <jannh@google.com> Link: https://lore.kernel.org/r/20241218-uring-reg-ring-cleanup-v1-1-8f63e999045b@google.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-12-18ima: instantiate the bprm_creds_for_exec() hookMimi Zohar
Like direct file execution (e.g. ./script.sh), indirect file execution (e.g. sh script.sh) needs to be measured and appraised. Instantiate the new security_bprm_creds_for_exec() hook to measure and verify the indirect file's integrity. Unlike direct file execution, indirect file execution is optionally enforced by the interpreter. Differentiate kernel and userspace enforced integrity audit messages. Co-developed-by: Roberto Sassu <roberto.sassu@huawei.com> Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com> Tested-by: Stefan Berger <stefanb@linux.ibm.com> Reviewed-by: Mickaël Salaün <mic@digikod.net> Signed-off-by: Mickaël Salaün <mic@digikod.net> Link: https://lore.kernel.org/r/20241212174223.389435-9-mic@digikod.net Signed-off-by: Kees Cook <kees@kernel.org>
2024-12-18security: Add EXEC_RESTRICT_FILE and EXEC_DENY_INTERACTIVE securebitsMickaël Salaün
The new SECBIT_EXEC_RESTRICT_FILE, SECBIT_EXEC_DENY_INTERACTIVE, and their *_LOCKED counterparts are designed to be set by processes setting up an execution environment, such as a user session, a container, or a security sandbox. Unlike other securebits, these ones can be set by unprivileged processes. Like seccomp filters or Landlock domains, the securebits are inherited across processes. When SECBIT_EXEC_RESTRICT_FILE is set, programs interpreting code should control executable resources according to execveat(2) + AT_EXECVE_CHECK (see previous commit). When SECBIT_EXEC_DENY_INTERACTIVE is set, a process should deny execution of user interactive commands (which excludes executable regular files). Being able to configure each of these securebits enables system administrators or owner of image containers to gradually validate the related changes and to identify potential issues (e.g. with interpreter or audit logs). It should be noted that unlike other security bits, the SECBIT_EXEC_RESTRICT_FILE and SECBIT_EXEC_DENY_INTERACTIVE bits are dedicated to user space willing to restrict itself. Because of that, they only make sense in the context of a trusted environment (e.g. sandbox, container, user session, full system) where the process changing its behavior (according to these bits) and all its parent processes are trusted. Otherwise, any parent process could just execute its own malicious code (interpreting a script or not), or even enforce a seccomp filter to mask these bits. Such a secure environment can be achieved with an appropriate access control (e.g. mount's noexec option, file access rights, LSM policy) and an enlighten ld.so checking that libraries are allowed for execution e.g., to protect against illegitimate use of LD_PRELOAD. Ptrace restrictions according to these securebits would not make sense because of the processes' trust assumption. Scripts may need some changes to deal with untrusted data (e.g. stdin, environment variables), but that is outside the scope of the kernel. See chromeOS's documentation about script execution control and the related threat model: https://www.chromium.org/chromium-os/developer-library/guides/security/noexec-shell-scripts/ Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Christian Brauner <brauner@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Paul Moore <paul@paul-moore.com> Reviewed-by: Serge Hallyn <serge@hallyn.com> Reviewed-by: Jeff Xu <jeffxu@chromium.org> Tested-by: Jeff Xu <jeffxu@chromium.org> Signed-off-by: Mickaël Salaün <mic@digikod.net> Link: https://lore.kernel.org/r/20241212174223.389435-3-mic@digikod.net Signed-off-by: Kees Cook <kees@kernel.org>
2024-12-18exec: Add a new AT_EXECVE_CHECK flag to execveat(2)Mickaël Salaün
Add a new AT_EXECVE_CHECK flag to execveat(2) to check if a file would be allowed for execution. The main use case is for script interpreters and dynamic linkers to check execution permission according to the kernel's security policy. Another use case is to add context to access logs e.g., which script (instead of interpreter) accessed a file. As any executable code, scripts could also use this check [1]. This is different from faccessat(2) + X_OK which only checks a subset of access rights (i.e. inode permission and mount options for regular files), but not the full context (e.g. all LSM access checks). The main use case for access(2) is for SUID processes to (partially) check access on behalf of their caller. The main use case for execveat(2) + AT_EXECVE_CHECK is to check if a script execution would be allowed, according to all the different restrictions in place. Because the use of AT_EXECVE_CHECK follows the exact kernel semantic as for a real execution, user space gets the same error codes. An interesting point of using execveat(2) instead of openat2(2) is that it decouples the check from the enforcement. Indeed, the security check can be logged (e.g. with audit) without blocking an execution environment not yet ready to enforce a strict security policy. LSMs can control or log execution requests with security_bprm_creds_for_exec(). However, to enforce a consistent and complete access control (e.g. on binary's dependencies) LSMs should restrict file executability, or measure executed files, with security_file_open() by checking file->f_flags & __FMODE_EXEC. Because AT_EXECVE_CHECK is dedicated to user space interpreters, it doesn't make sense for the kernel to parse the checked files, look for interpreters known to the kernel (e.g. ELF, shebang), and return ENOEXEC if the format is unknown. Because of that, security_bprm_check() is never called when AT_EXECVE_CHECK is used. It should be noted that script interpreters cannot directly use execveat(2) (without this new AT_EXECVE_CHECK flag) because this could lead to unexpected behaviors e.g., `python script.sh` could lead to Bash being executed to interpret the script. Unlike the kernel, script interpreters may just interpret the shebang as a simple comment, which should not change for backward compatibility reasons. Because scripts or libraries files might not currently have the executable permission set, or because we might want specific users to be allowed to run arbitrary scripts, the following patch provides a dynamic configuration mechanism with the SECBIT_EXEC_RESTRICT_FILE and SECBIT_EXEC_DENY_INTERACTIVE securebits. This is a redesign of the CLIP OS 4's O_MAYEXEC: https://github.com/clipos-archive/src_platform_clip-patches/blob/f5cb330d6b684752e403b4e41b39f7004d88e561/1901_open_mayexec.patch This patch has been used for more than a decade with customized script interpreters. Some examples can be found here: https://github.com/clipos-archive/clipos4_portage-overlay/search?q=O_MAYEXEC Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <brauner@kernel.org> Cc: Kees Cook <keescook@chromium.org> Acked-by: Paul Moore <paul@paul-moore.com> Reviewed-by: Serge Hallyn <serge@hallyn.com> Reviewed-by: Jeff Xu <jeffxu@chromium.org> Tested-by: Jeff Xu <jeffxu@chromium.org> Link: https://docs.python.org/3/library/io.html#io.open_code [1] Signed-off-by: Mickaël Salaün <mic@digikod.net> Link: https://lore.kernel.org/r/20241212174223.389435-2-mic@digikod.net Signed-off-by: Kees Cook <kees@kernel.org>
2024-12-19PCI: Update code comment on PCI_EXP_LNKCAP_SLS for PCIe r3.0Lukas Wunner
Niklas notes that the code comment on the PCI_EXP_LNKCAP_SLS macro is outdated as it reflects the meaning of the field prior to PCIe r3.0. Update it to avoid confusion. Closes: https://lore.kernel.org/r/70829798889c6d779ca0f6cd3260a765780d1369.camel@kernel.org Link: https://lore.kernel.org/r/6152bd17cbe0876365d5f4624fc317529f4bbc85.1734376438.git.lukas@wunner.de Reported-by: Niklas Schnelle <niks@kernel.org> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
2024-12-19bq27xxx: add voltage min design for bq27000 and bq27200Sicelo A. Mhlongo
The bq27x00 gauges have an EEPROM register which contains the value of the voltage that should be considered to be zero battery capacity. Expose this to userspace using the VOLTAGE_MIN_DESIGN property. Tested on Nokia N900 with bq27200. Signed-off-by: Sicelo A. Mhlongo <absicsz@gmail.com> Acked-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20241125151321.45440-1-absicsz@gmail.com Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
2024-12-18KVM: x86: Drop the now unused KVM_X86_DISABLE_VALID_EXITSSean Christopherson
Drop the KVM_X86_DISABLE_VALID_EXITS definition, as it is misleading, and unused in KVM *because* it is misleading. The set of exits that can be disabled is dynamic, i.e. userspace (and KVM) must check KVM's actual capabilities. Suggested-by: Xiaoyao Li <xiaoyao.li@intel.com> Link: https://lore.kernel.org/r/20241128013424.4096668-16-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>
2024-12-18KVM: arm64: Add unified helper for reprogramming counters by maskOliver Upton
Having separate helpers for enabling/disabling counters provides the wrong abstraction, as the state of each counter needs to be evaluated independently and, in some cases, use a different global enable bit. Collapse the enable/disable accessors into a single, common helper that reconfigures every counter set in @mask, leaving the complexity of determining if an event is actually enabled in kvm_pmu_counter_is_enabled(). Reviewed-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20241217175513.3658056-1-oliver.upton@linux.dev Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2024-12-18PM: wakeup: implement devm_device_init_wakeup() helperJoe Hattori
Some drivers that enable device wakeup fail to properly disable it during their cleanup, which results in a memory leak. To address this, introduce devm_device_init_wakeup(), a managed variant of device_init_wakeup(dev, true). With this managed helper, wakeup functionality will be automatically disabled when the device is released, ensuring a more reliable cleanup process. This need for this addition arose during a previous discussion [1]. Link: https://lore.kernel.org/linux-rtc/20241212100403.3799667-1-joe@pf.is.s.u-tokyo.ac.jp/ [1] Suggested-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Joe Hattori <joe@pf.is.s.u-tokyo.ac.jp> Link: https://patch.msgid.link/20241218040935.1921416-1-joe@pf.is.s.u-tokyo.ac.jp Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
generated by cgit (git 2.34.1) at 2025-09-15 16:52:53 +0000