| Age | Commit message (Collapse) | Author |
|---|
|
Add support for adding and removing station links:
- Adding links is done asynchronously, i.e., first
an ML reconfiguration action frame is sent to the AP
requesting to add links, and only when the AP replies,
links which were added successfully by the AP are added
locally.
- Removing links is done synchronously, i.e., the links
are removed before sending the ML reconfiguration
action frame to the AP (to avoid using this links after
the AP MLD removed them but before the station got the
ML reconfiguration response). In case the AP replies with a
status indicating that a link removal was not successful,
disconnect (as this should not happen an is an indication
that something might be wrong on the AP MLD).
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250102161730.ec0492a8dd21.I2869686642bbc0f86c40f284ebf7e6f644b551ab@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Add support for requesting dynamic addition/removal of links to the
current MLO association.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250102161730.cef23352f2a2.I79c849974c494cb1cbf9e1b22a5d2d37395ff5ac@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
As a preparation to support ML reconfiguration request and
response, add additional ML reconfiguration definitions
required to support the flow. See Section 9.4.2.321.4 in
Draft P802.11be_D6.0.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250102161730.4970ca10ebfd.Ibe7f6108cd0e04b8c739a8e35a4f485f664a17e6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Currently the SAE_H2E selector already exists, which needs to be
implemented by the SME. As new such selectors might be added in the
future, add a feature to permit userspace to report a selector as
supported.
If not given, the kernel should assume that userspace does support
SAE_H2E.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250101070249.fe67b871cc39.Ieb98390328927e998e612345a58b6dbc00b0e3a2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
The GLK and EPD Selectors are also not rates, so add a new macro for the
minimum value of a selector and test against that instead of the entire
list. Also fix the typo in the EPD selector define.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250101070249.2c19a2dc53db.If187b7d93d8b43a6c70e422c837b7636538fb358@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Check that additionally extended MLD capa/ops for the MLD is
consistent, i.e. the same value is reported by all affiliated
APs/links.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250101070249.e29f42c7ae21.Ib2cdce608321ad154e4b13103cc315c3e3cb6b2b@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
ieee80211_key_conf::keyidx s in range 0-7, ano not 0-3. Make this clear
in the documentation.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250101070249.4e414710fba7.Ib739c40dd5aa6ed148c3151220eb38d8a9e238de@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
In order to save power, it can be desirable to change the
RX operating mode using OMI to reduce the bandwidth. As the
handshake must be done in the HTC+ field, it cannot be done
by mac80211 directly, so expose functions to the driver to
request and finalize the necessary updates.
Note that RX OMI really only changes what the peer (AP) will
transmit to us, but in order to use it to actually save some
power (by reducing the listen bandwidth) we also update rate
scaling and then the channel context's mindef accordingly.
The updates are split into two in order to sequence them
correctly, when reducing bandwidth first reduce the rate
scaling and thus TX, then send OMI, then reduce the listen
bandwidth (chandef); when increasing bandwidth this is the
other way around. This also requires tracking in different
variables which part is applicable already.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250101070249.2c1a1934bd73.I4e90fd503504e37f9eac5bdae62e3f07e7071275@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Current ASoC is using dai_link->dai_fmt to set DAI format for both
CPU/Codec. But because it is using same settings, and
SND_SOC_DAIFMT_CLOCK_PROVIDER is flipped for CPU, we can't set both
CPU/Codec as clock consumer, for example.
To solve this issue, this patch enable to use extra format for each
DAI which can keep compatibility with legacy system,
1. SND_SOC_DAIFMT_FORMAT_MASK
2. SND_SOC_DAIFMT_CLOCK
3. SND_SOC_DAIFMT_INV
4. SND_SOC_DAIFMT_CLOCK_PROVIDER
Legacy
dai_fmt includes 1, 2, 3, 4
New idea
dai_fmt includes 1, 2, 3
ext_fmt includes 4
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Stephen Gordon <gordoste@iinet.net.au>
Link: https://patch.msgid.link/87r05go5ja.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
for-6.14/block
Pull NVMe updates from Keith:
"nvme updates for Linux 6.14
- Target support for PCI-Endpoint transport (Damien)
- TCP IO queue spreading fixes (Sagi, Chaitanya)
- Target handling for "limited retry" flags (Guixen)
- Poll type fix (Yongsoo)
- Xarray storage error handling (Keisuke)
- Host memory buffer free size fix on error (Francis)"
* tag 'nvme-6.14-2025-01-12' of git://git.infradead.org/nvme: (25 commits)
nvme-pci: use correct size to free the hmb buffer
nvme: Add error path for xa_store in nvme_init_effects
nvme-pci: fix comment typo
Documentation: Document the NVMe PCI endpoint target driver
nvmet: New NVMe PCI endpoint function target driver
nvmet: Implement arbitration feature support
nvmet: Implement interrupt config feature support
nvmet: Implement interrupt coalescing feature support
nvmet: Implement host identifier set feature support
nvmet: Introduce get/set_feature controller operations
nvmet: Do not require SGL for PCI target controller commands
nvmet: Add support for I/O queue management admin commands
nvmet: Introduce nvmet_sq_create() and nvmet_cq_create()
nvmet: Introduce nvmet_req_transfer_len()
nvmet: Improve nvmet_alloc_ctrl() interface and implementation
nvme: Add PCI transport type
nvmet: Add drvdata field to struct nvmet_ctrl
nvmet: Introduce nvmet_get_cmd_effects_admin()
nvmet: Export nvmet_update_cc() and nvmet_cc_xxx() helpers
nvmet: Add vendor_id and subsys_vendor_id subsystem attributes
...
|
|
Adds rb_find_add_cached() as a helper function for use with red-black
trees. Used in btrfs to reduce boilerplate code.
And since it's a new helper, the cmp() function will require both
parameter to be const rb_node pointers.
Suggested-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Roger L. Beckermeyer III <beckerlee3@gmail.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
On the zoned mode, once used and freed region is still not reusable after the
freeing. The underlying zone needs to be reset before reusing. Btrfs resets a
zone when it removes a block group, and then new block group is allocated on
the zones to reuse the zones. But, it is sometime too late to catch up with a
write side.
This commit introduces a new space-info reclaim method ZONE_RESET. That will
pick a block group from the unused list and reset its zone to reuse the
zone_unusable space. It is faster than removing the block group and re-creating
a new block group on the same zones.
For the first implementation, the ZONE_RESET is only applied to a block group
whose region is fully zone_unusable. Reclaiming partial zone_unusable block
group could be implemented later.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
|
|
Currently, the sequence goes like this (among others):
1. flush all stations (including the AP ones) -> this will tell the
drivers to remove the stations
2. notify the driver the vif is not associated.
Which means that in between 1 and 2, the state is that the vif is
associated, but there is no AP station, which makes no sense, and may be
problematic for some drivers (for example iwlwifi)
Change the sequence to:
1. flush the TDLS stations
2. move the AP station to IEEE80211_STA_NONE
3. notify the driver about the vif being unassociated
4. flush the AP station
In order to not break other drivers, add a vif flag to indicate whether
the driver wants to new sequence or not. If the flag is not set, then
things will be done in the old sequence.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20241224192322.996ad1be6cb3.I7815d33415aa1d65c0120b54be7a15a45388f807@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
We need the serial driver fixes in here to build on top of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the debugfs / driver-core fixes in here as well for testing and
to build on top of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the IIO fixes in here as well, and it resolves a merge conflict
in:
drivers/iio/adc/ti-ads1119.c
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Static devm_usb_phy_match() is only called by API devm_usb_put_phy(), and
the API has no caller now.
Remove the API and the static function.
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20250112-remove_api-v1-1-49cc8f792ac9@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We need the USB fixes in here as well for testing.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Delay accounting can now calculate the average delay of processes, detect
the overall system load, and also record the 'delay max' to identify
potential abnormal delays. However, 'delay min' can help us identify
another useful delay peak. By comparing the difference between 'delay
max' and 'delay min', we can understand the optimization space for
latency, providing a reference for the optimization of latency
performance.
Use case
=========
bash-4.4# ./getdelays -d -t 242
print delayacct stats ON
TGID 242
CPU count real total virtual total delay total delay average delay max delay min
39 156000000 156576579 2111069 0.054ms 0.212296ms 0.031307ms
IO count delay total delay average delay max delay min
0 0 0.000ms 0.000000ms 0.000000ms
SWAP count delay total delay average delay max delay min
0 0 0.000ms 0.000000ms 0.000000ms
RECLAIM count delay total delay average delay max delay min
0 0 0.000ms 0.000000ms 0.000000ms
THRASHING count delay total delay average delay max delay min
0 0 0.000ms 0.000000ms 0.000000ms
COMPACT count delay total delay average delay max delay min
0 0 0.000ms 0.000000ms 0.000000ms
WPCOPY count delay total delay average delay max delay min
156 11215873 0.072ms 0.207403ms 0.033913ms
IRQ count delay total delay average delay max delay min
0 0 0.000ms 0.000000ms 0.000000ms
Link: https://lkml.kernel.org/r/20241220173105906EOdsPhzjMLYNJJBqgz1ga@zte.com.cn
Co-developed-by: Wang Yong <wang.yong12@zte.com.cn>
Signed-off-by: Wang Yong <wang.yong12@zte.com.cn>
Co-developed-by: xu xin <xu.xin16@zte.com.cn>
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Signed-off-by: Wang Yaxin <wang.yaxin@zte.com.cn>
Co-developed-by: Kun Jiang <jiang.kun2@zte.com.cn>
Signed-off-by: Kun Jiang <jiang.kun2@zte.com.cn>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Fan Yu <fan.yu9@zte.com.cn>
Cc: Peilin He <he.peilin@zte.com.cn>
Cc: tuqiang <tu.qiang35@zte.com.cn>
Cc: ye xingchen <ye.xingchen@zte.com.cn>
Cc: Yunkai Zhang <zhang.yunkai@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Fix presumed copy-paste typo of kasan_poison_new_object documentation
referring to kasan_unpoison_new_object.
No functional changes.
Link: https://lkml.kernel.org/r/20241220181205.9663-1-dominik.karol.piatkowski@protonmail.com
Fixes: 1ce9a0523938 ("kasan: rename and document kasan_(un)poison_object_data")
ta")
Signed-off-by: Dominik Karol Piątkowski <dominik.karol.piatkowski@protonmail.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
"include/asm-<arch>" was replaced by "arch/<arch>/include/asm" a long time
ago.
Link: https://lkml.kernel.org/r/541258219b0441fa1da890e2f8458a7ac18c2ef9.1733404444.git.geert+renesas@glider.be
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com>
Cc: Joe Perches <joe@perches.com>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Introduce the use cases of delay max, which can help quickly detect
potential abnormal delays in the system and record the types and specific
details of delay spikes.
Problem
========
Delay accounting can track the average delay of processes to show
system workload. However, when a process experiences a significant
delay, maybe a delay spike, which adversely affects performance,
getdelays can only display the average system delay over a period
of time. Yet, average delay is unhelpful for diagnosing delay peak.
It is not even possible to determine which type of delay has spiked,
as this information might be masked by the average delay.
Solution
=========
the 'delay max' can display delay peak since the system's startup,
which can record potential abnormal delays over time, including
the type of delay and the maximum delay. This is helpful for
quickly identifying crash caused by delay.
Use case
=========
bash# ./getdelays -d -p 244
print delayacct stats ON
PID 244
CPU count real total virtual total delay total delay average delay max
68 192000000 213676651 705643 0.010ms 0.306381ms
IO count delay total delay average delay max
0 0 0.000ms 0.000000ms
SWAP count delay total delay average delay max
0 0 0.000ms 0.000000ms
RECLAIM count delay total delay average delay max
0 0 0.000ms 0.000000ms
THRASHING count delay total delay average delay max
0 0 0.000ms 0.000000ms
COMPACT count delay total delay average delay max
0 0 0.000ms 0.000000ms
WPCOPY count delay total delay average delay max
235 15648284 0.067ms 0.263842ms
IRQ count delay total delay average delay max
0 0 0.000ms 0.000000ms
[wang.yaxin@zte.com.cn: update docs and fix some spelling errors]
Link: https://lkml.kernel.org/r/20241213192700771XKZ8H30OtHSeziGqRVMs0@zte.com.cn
Link: https://lkml.kernel.org/r/20241203164848805CS62CQPQWG9GLdQj2_BxS@zte.com.cn
Co-developed-by: Wang Yong <wang.yong12@zte.com.cn>
Signed-off-by: Wang Yong <wang.yong12@zte.com.cn>
Co-developed-by: xu xin <xu.xin16@zte.com.cn>
Signed-off-by: xu xin <xu.xin16@zte.com.cn>
Co-developed-by: Wang Yaxin <wang.yaxin@zte.com.cn>
Signed-off-by: Wang Yaxin <wang.yaxin@zte.com.cn>
Signed-off-by: Kun Jiang <jiang.kun2@zte.com.cn>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Fan Yu <fan.yu9@zte.com.cn>
Cc: Peilin He <he.peilin@zte.com.cn>
Cc: tuqiang <tu.qiang35@zte.com.cn>
Cc: Yang Yang <yang.yang29@zte.com.cn>
Cc: ye xingchen <ye.xingchen@zte.com.cn>
Cc: Yunkai Zhang <zhang.yunkai@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
A short description of the Min Heap API is added to the min_heap.h,
explaining its purpose for managing min-heaps and emphasizing the use of
macro wrappers instead of direct function calls. For more details, users
are directed to the documentation at Documentation/core-api/min_heap.rst.
Link: https://lkml.kernel.org/r/20241129181222.646855-4-visitorckw@gmail.com
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Cc: Ching-Chun (Jim) Huang <jserv@ccns.ncku.edu.tw>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "lib min_heap: Improve min_heap safety, testing, and
documentation".
Improve the min heap implementation by enhancing type safety with
container_of, reducing the attack vector by replacing test function calls
with inline variants, and adding a brief API introduction in min_heap.h.
It also includes author information in
Documentation/core-api/min_heap.rst.
This patch (of 4):
The current implementation of min_heap macros uses explicit casting to
min_heap_char *, which prevents the compiler from detecting incorrect
pointer types. This can lead to errors if non-min_heap pointers are
passed inadvertently.
To enhance safety, replace all explicit casts to min_heap_char * with the
use of container_of(&(_heap)->nr, min_heap_char, nr). This approach
ensures that the _heap parameter is indeed a min_heap_char-compatible
structure, allowing the compiler to catch improper usages.
Link: https://lkml.kernel.org/r/20241129181222.646855-1-visitorckw@gmail.com
Link: https://lore.kernel.org/lkml/CAMuHMdVO5DPuD9HYWBFqKDHphx7+0BEhreUxtVC40A=8p6VAhQ@mail.gmail.com
Link: https://lkml.kernel.org/r/20241129181222.646855-2-visitorckw@gmail.com
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ching-Chun (Jim) Huang <jserv@ccns.ncku.edu.tw>
Cc: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When mremap()ing a memory region previously registered with userfaultfd as
write-protected but without UFFD_FEATURE_EVENT_REMAP, an inconsistency in
flag clearing leads to a mismatch between the vma flags (which have
uffd-wp cleared) and the pte/pmd flags (which do not have uffd-wp
cleared). This mismatch causes a subsequent mprotect(PROT_WRITE) to
trigger a warning in page_table_check_pte_flags() due to setting the pte
to writable while uffd-wp is still set.
Fix this by always explicitly clearing the uffd-wp pte/pmd flags on any
such mremap() so that the values are consistent with the existing clearing
of VM_UFFD_WP. Be careful to clear the logical flag regardless of its
physical form; a PTE bit, a swap PTE bit, or a PTE marker. Cover PTE,
huge PMD and hugetlb paths.
Link: https://lkml.kernel.org/r/20250107144755.1871363-2-ryan.roberts@arm.com
Co-developed-by: Mikołaj Lenczewski <miko.lenczewski@arm.com>
Signed-off-by: Mikołaj Lenczewski <miko.lenczewski@arm.com>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Closes: https://lore.kernel.org/linux-mm/810b44a8-d2ae-4107-b665-5a42eae2d948@arm.com/
Fixes: 63b2d4174c4a ("userfaultfd: wp: add the writeprotect API to userfaultfd ioctl")
Cc: David Hildenbrand <david@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Liam R. Howlett <Liam.Howlett@Oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
A livepatch module can contain a special relocation section
.klp.rela.<objname>.<secname> to apply its relocations at the appropriate
time and to additionally access local and unexported symbols. When
<objname> points to another module, such relocations are processed
separately from the regular module relocation process. For instance, only
when the target <objname> actually becomes loaded.
With CONFIG_STRICT_MODULE_RWX, when the livepatch core decides to apply
these relocations, their processing results in the following bug:
[ 25.827238] BUG: unable to handle page fault for address: 00000000000012ba
[ 25.827819] #PF: supervisor read access in kernel mode
[ 25.828153] #PF: error_code(0x0000) - not-present page
[ 25.828588] PGD 0 P4D 0
[ 25.829063] Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
[ 25.829742] CPU: 2 UID: 0 PID: 452 Comm: insmod Tainted: G O K 6.13.0-rc4-00078-g059dd502b263 #7820
[ 25.830417] Tainted: [O]=OOT_MODULE, [K]=LIVEPATCH
[ 25.830768] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-20220807_005459-localhost 04/01/2014
[ 25.831651] RIP: 0010:memcmp+0x24/0x60
[ 25.832190] Code: [...]
[ 25.833378] RSP: 0018:ffffa40b403a3ae8 EFLAGS: 00000246
[ 25.833637] RAX: 0000000000000000 RBX: ffff93bc81d8e700 RCX: ffffffffc0202000
[ 25.834072] RDX: 0000000000000000 RSI: 0000000000000004 RDI: 00000000000012ba
[ 25.834548] RBP: ffffa40b403a3b68 R08: ffffa40b403a3b30 R09: 0000004a00000002
[ 25.835088] R10: ffffffffffffd222 R11: f000000000000000 R12: 0000000000000000
[ 25.835666] R13: ffffffffc02032ba R14: ffffffffc007d1e0 R15: 0000000000000004
[ 25.836139] FS: 00007fecef8c3080(0000) GS:ffff93bc8f900000(0000) knlGS:0000000000000000
[ 25.836519] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 25.836977] CR2: 00000000000012ba CR3: 0000000002f24000 CR4: 00000000000006f0
[ 25.837442] Call Trace:
[ 25.838297] <TASK>
[ 25.841083] __write_relocate_add.constprop.0+0xc7/0x2b0
[ 25.841701] apply_relocate_add+0x75/0xa0
[ 25.841973] klp_write_section_relocs+0x10e/0x140
[ 25.842304] klp_write_object_relocs+0x70/0xa0
[ 25.842682] klp_init_object_loaded+0x21/0xf0
[ 25.842972] klp_enable_patch+0x43d/0x900
[ 25.843572] do_one_initcall+0x4c/0x220
[ 25.844186] do_init_module+0x6a/0x260
[ 25.844423] init_module_from_file+0x9c/0xe0
[ 25.844702] idempotent_init_module+0x172/0x270
[ 25.845008] __x64_sys_finit_module+0x69/0xc0
[ 25.845253] do_syscall_64+0x9e/0x1a0
[ 25.845498] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 25.846056] RIP: 0033:0x7fecef9eb25d
[ 25.846444] Code: [...]
[ 25.847563] RSP: 002b:00007ffd0c5d6de8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[ 25.848082] RAX: ffffffffffffffda RBX: 000055b03f05e470 RCX: 00007fecef9eb25d
[ 25.848456] RDX: 0000000000000000 RSI: 000055b001e74e52 RDI: 0000000000000003
[ 25.848969] RBP: 00007ffd0c5d6ea0 R08: 0000000000000040 R09: 0000000000004100
[ 25.849411] R10: 00007fecefac7b20 R11: 0000000000000246 R12: 000055b001e74e52
[ 25.849905] R13: 0000000000000000 R14: 000055b03f05e440 R15: 0000000000000000
[ 25.850336] </TASK>
[ 25.850553] Modules linked in: deku(OK+) uinput
[ 25.851408] CR2: 00000000000012ba
[ 25.852085] ---[ end trace 0000000000000000 ]---
The problem is that the .klp.rela.<objname>.<secname> relocations are
processed after the module was already formed and mod->rw_copy was reset.
However, the code in __write_relocate_add() calls
module_writable_address() which translates the target address 'loc' still
to 'loc + (mem->rw_copy - mem->base)', with mem->rw_copy now being 0.
Fix the problem by returning directly 'loc' in module_writable_address()
when the module is already formed. Function __write_relocate_add() knows
to use text_poke() in such a case.
Link: https://lkml.kernel.org/r/20250107153507.14733-1-petr.pavlu@suse.com
Fixes: 0c133b1e78cd ("module: prepare to handle ROX allocations for text")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Reported-by: Marek Maslanka <mmaslanka@google.com>
Closes: https://lore.kernel.org/linux-modules/CAGcaFA2hdThQV6mjD_1_U+GNHThv84+MQvMWLgEuX+LVbAyDxg@mail.gmail.com/
Reviewed-by: Petr Mladek <pmladek@suse.com>
Tested-by: Petr Mladek <pmladek@suse.com>
Cc: Joe Lawrence <joe.lawrence@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Petr Mladek <pmladek@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
hugetlb_file_setup() will pass a NULL @dir to hugetlbfs_get_inode(), so we
will access a NULL pointer for @dir. Fix it and set __entry->dr to 0 if
@dir is NULL. Because ->i_ino cannot be 0 (see get_next_ino()), there is
no confusing if user sees a 0 inode number.
Link: https://lkml.kernel.org/r/20250106033118.4640-1-songmuchun@bytedance.com
Fixes: 318580ad7f28 ("hugetlbfs: support tracepoint")
Signed-off-by: Muchun Song <songmuchun@bytedance.com>
Reported-by: Cheung Wall <zzqq0103.hey@gmail.com>
Closes: https://lore.kernel.org/linux-mm/02858D60-43C1-4863-A84F-3C76A8AF1F15@linux.dev/T/#
Reviewed-by: Hongbo Li <lihongbo22@huawei.com>
Cc: cheung wall <zzqq0103.hey@gmail.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
drm-next
Updates for v6.14
MDSS:
- properly described UBWC registers
- added SM6150 (aka QCS615) support
MDP4:
- several small fixes
DPU:
- added SM6150 (aka QCS615) support
- enabled wide planes if virtual planes are enabled (by using two SSPPs for a single plane)
- fixed modes filtering for platforms w/o 3DMux
- fixed DSPP DSPP_2 / _3 links on several platforms
- corrected DSPP definitions on SDM670
- added CWB hardware blocks support
- added VBIF to DPU snapshots
- dropped struct dpu_rm_requirements
DP:
- reworked DP audio support
DSI:
- added SM6150 (aka QCS615) support
GPU:
- Print GMU core fw version
- GMU bandwidth voting for a740 and a750
- Expose uche trap base via uapi
- UAPI error reporting
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGsutUu4ff6OpXNXxqf1xaV0rV6oV23VXNRiF0_OEfe72Q@mail.gmail.com
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
Driver Changes:
- SRIOV VF: Avoid reading inaccessible registers (Jakub, Marcin)
- Introduce RPa frequency information (Rodrigo)
- Remove unnecessary force wakes on SLPC code (Vinay)
- Fix all typos in xe (Nitin)
- Adding steering info support for GuC register lists (Jesus)
- Remove unused xe_pciids.h harder, add missing PCI ID (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Z4E0tlTAA6MZ7PF2@intel.com
|
|
There are multiple open coded implementations for getting the parity of
a byte in the kernel, even using different approaches. Take the pretty
efficient version from SPD5118 driver and make it generally available by
putting it into the bitops header. As long as there is just one parity
calculation helper, the creation of a distinct 'parity.h' header was
discarded. Also, the usage of hweight8() for architectures having a
popcnt instruction is postponed until a use case within hot paths is
desired. The motivation for this patch is the frequent use of odd parity
in the I3C specification and to simplify drivers there.
Changes compared to the original SPD5118 version are the addition of
kernel documentation, switching the return type from bool to int, and
renaming the argument of the function.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Tested-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Link: https://lore.kernel.org/r/20250107090204.6593-2-wsa+renesas@sang-engineering.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
A typo mentioned I3C when it should have been I2C.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20241219220338.10315-1-wsa+renesas@sang-engineering.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Pull kvm fixes from Paolo Bonzini:
"The largest part here is for KVM/PPC, where a NULL pointer dereference
was introduced in the 6.13 merge window and is now fixed.
There's some "holiday-induced lateness", as the s390 submaintainer put
it, but otherwise things looks fine.
s390:
- fix a latent bug when the kernel is compiled in debug mode
- two small UCONTROL fixes and their selftests
arm64:
- always check page state in hyp_ack_unshare()
- align set_id_regs selftest with the fact that ASIDBITS field is RO
- various vPMU fixes for bugs that only affect nested virt
PPC e500:
- Fix a mostly impossible (but just wrong) case where IRQs were never
re-enabled
- Observe host permissions instead of mapping readonly host pages as
guest-writable. This fixes a NULL-pointer dereference in 6.13
- Replace brittle VMA-based attempts at building huge shadow TLB
entries with PTE lookups"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: e500: perform hugepage check after looking up the PFN
KVM: e500: map readonly host pages for read
KVM: e500: track host-writability of pages
KVM: e500: use shadow TLB entry as witness for writability
KVM: e500: always restore irqs
KVM: s390: selftests: Add has device attr check to uc_attr_mem_limit selftest
KVM: s390: selftests: Add ucontrol gis routing test
KVM: s390: Reject KVM_SET_GSI_ROUTING on ucontrol VMs
KVM: s390: selftests: Add ucontrol flic attr selftests
KVM: s390: Reject setting flic pfault attributes on ucontrol VMs
KVM: s390: vsie: fix virtual/physical address in unpin_scb()
KVM: arm64: Only apply PMCR_EL0.P to the guest range of counters
KVM: arm64: nv: Reload PMU events upon MDCR_EL2.HPME change
KVM: arm64: Use KVM_REQ_RELOAD_PMU to handle PMCR_EL0.E change
KVM: arm64: Add unified helper for reprogramming counters by mask
KVM: arm64: Always check the state from hyp_ack_unshare()
KVM: arm64: Fix set_id_regs selftest for ASIDBITS becoming unwritable
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Pull IIO updaate from Jonathan:
IIO: 1st set of new device support, features and cleanup for 6.14
Fairly quiet cycle. Usual mix of new drivers, device support in
existing drivers, features and more general rework and cleanup.
There are a few late breaking or long standing but complex fixes
in here as well.
There is one expected merge conflict due to an upstream fix touching
neighboring code in ti-ads1119. The trivial resolution is the right one with
the result ending up as:
struct {
s16 sample;
aligned_s64 timestamp;
} scan;
New device support
==================
adi,ad4000
- Add support for many Pulsar ADC devices: AD7685, AD7686, AD7687, AD7688,
AD7690, AD7691, AD7693, AD7942, AD7946, AD7980, AD7982, AD7983, AD7984,
AD7988-1 and AD7988-5 ADCs. Generally similar to the AD4000 series
but with lower sampling rates and no configuration registers.
Includes addition of timestamp channels.
adi,adis16480
- Add support for ADIS16486, ADIS16487 and ADIS16489 IMUs. Required a few tweaks
to existing driver and addition of tables.
kionix,kx022a
- Add support for KX134ACR-LBZ accelerometer that is similar to the
KX132ACR-LBZ but with a wider (+-64G) sensor range.
- Add support for KX134-1211 accelerometer that is similar to the
KX132-1211 but with a wider (+-16G) sensor range.
nxp,fxls8962af
- Add support for fxls8974cf and fxls8967af accelerometers, Both are
compatible with fxls8962af but with different device IDs which are used in
presence checks.
renesas,rzg2l
- Add support for Renesas RZ/GS3 SoC ADCs (various driver refactors
precede this to allow for chip differences).
rohm,bd79704
- New driver for this 6 channel DAC.
st,mpu6050
- Support he IAM20380 which is effectively a cut down IAM20608 IMU with only
a gyroscope (no accelerometer).
st,stm-timmer-trigger
- Add support for ADC trigger use case for the STM32MP25 SOC. Do not support
the counter functionality in this driver as that is handled by the
counter subsystem.
ti,opt4060
- New driver for this RGBW color sensor.
Driver drop
===========
rohm,bu20008
- Drop as decision was made to not mass produce this light sensor after
Matti had done all the work to get a driver upstream.
Features
========
adi,ad_sigma_delta library + ad7124
- Allow for GPIO to check interrupt status, enabling this device on
more platforms that don't obey prior (non general) assumptions on
how the interrupt chips work.
- Allow variation in reset sequence length allowing chip specific
optimizations rather than always using worst case.
adi,ad7124
- Add temperature channel support.
adi,ad7173
- Add support calibration modes for this family of ADCs.
adi,adxl345
- Binding update to allow specification of which interrupt line is
connected (or none).
- Support interrupts and FIFO based data capture.
bosch,bme680
- Add regulators support. Note this required a new binding doc rather than
use of trivial-devices
- Runtime PM support.
microchip,pac1921
- Add ACPI support including _DSM for shunt value and label.
renesas,rzg2l
- Enable runtime autosuspend.
- Add suspend and resume support.
tyhx,hx9023s
- Add loading of a firmware file used to set defaults for some
configuration registers.
vishay,veml6030
- Support triggered buffers allowing efficient data capture at
higher speeds.
- Add regmap cache to reduce access to device.
Cleanup and minor fixes
=======================
cross-tree
- Another batch of conversions to devm_regulator_get_enable_read_voltage()
helper and related conversions to full devm that this enables.
- Various patches using guard() to allow early returns and simpler
code flow.
- Various conversions from s64 timestamp __aligned(8) to aligned_s64 type.
Includes a few cleanups where this unsigned and it should have been
signed.
- Fix up some missing types for drive-open-drain in dt-binding docs.
core
- Add missing documentation for iio_dmaengine_buffer_setup_ext()
- Add check that all buffers passed to iio_read_channel_ext_info()
and iio_read_channel_label() are page sized and page aligned.
Done this way because the callbacks are almost always only used
to fill sysfs attributes. The check covers the tiny percentage
of cases where use is made of this data in a consumer driver.
- Mark scan_timestamp memory of struct iio_dev private ensuring no
drivers change the value which belongs to the IIO core.
documentation
- Various missing ABI docs added.
- ABI docs made to use Y consistently as the wildcard for channel
number.
- Combine duplicate in_currentY_raw entries in ABI docs.
iio-mux
- Fix alignment of buffers passed to iio_channel_read_ext_info().
adi,ad_sigma_delta library
- Respect keep_cs_asserted flag in read path.
- Close a race condition around irq enabling and disabling.
- Use explicit unsigned int in place of unsigned.
adi,ad6695
- Move dt-binding header under adc sub-directory and fix include path in dt
example.
adi,ad7124
- Check number of channels in DT doesn't exceed what the driver can handle.
- Check input specified in DT are possible.
- Improved error reporting during probe.
adi,ad7173
- Drop unused structure element.
adi,ad7293
- Ensure power is turned on before resetting.
adi,adxl345
- Some documentation simplification and parameter renames.
- Add a function than unifies handling of power up and power down.
- Add defines to have a complete set of registers defined.
- Add missing \n to end of error messages.
amlogic,meson_saradc
- Simplify handling of the REG11 register access.
awinic,aw96104
- Constify iio_info structure.
bosch,bmp085
- Add to dt-binding to indicate devices support SPI.
bosch,bmp280
- Use sizeof() to replace a somewhat magic 2.
- Rename sleep related variables so the unit is included and use
fsleep() to replace usleep_range() calls.
bosch,bno055
- Constify struct bin_attribute
capella,cm3232
- Reset device before checking hardware ID inline with suggested flow
from datasheet.
diolan,dln2
- Simplify zeroing of structure used to gather up data by just
clearing the whole thing before writing rather than trying to
clear out he padding after write.
freescale,vf610
- Use devm_ and dev_error_probe() to simplify code and allow dropping
of explicit remove() callback.
invensense,timestamp library
- Use a cast to remove possibility of integer overflow.
kionix,kx022a
- Increase reset delay a little.
maxim,max1363
- Use a buffer of sufficient size in iio_priv() rather than allocating
variable sized buffer at use time.
microchip,mcp4725
- Replace of_property_read_bool() with of_property_present() for
detecting presence of regulator which is obviously not a bool.
nxp,fxls8962af
- Add wakeup-source property to the dt binding to allow these sensors
to wake the system up from suspend.
- Enable finer grained build when not all bus types need to be supported.
renesas,rzg2l
- Use dev_err_probe(), improving handling of probe errors and simplifying
code.
- Convert to devm_ based cleanup.
- Remove unnecessary runtime PM complexity as clocks are managed through
PM domains.
- Switch pm_ptr() removing need for __maybe_unused markings.
- use read_poll_timeout() to replace open coded equivalent.
samsung, ssp_sensors
- Simplify code by always providing timestamp whether or not it
is enabled.
st,lsm6dsx
- Avoid need to include linux/i3c/master by using i3cdev_to_dev() to
get to the contained struct device.
st,stm32-timer-trigger
- Check for clk_enable() fails.
vishay,veml6030
- Use new gts-helper functions and fix the _scale attribute to take into
account changes in gain and integration time.
Various other typo fixes in variable names + documentation and help text.
A few whitespace cleanup patches.
* tag 'iio-for-6.14a' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (142 commits)
iio: iio-mux: kzalloc instead of devm_kzalloc to ensure page alignment
iio: adc: ad7625: Add ending newlines to error messages
iio: accel: adxl345: complete the list of defines
iio: accel: adxl345: add FIFO with watermark events
iio: accel: adxl345: initialize FIFO delay value for SPI
iio: accel: adxl345: introduce interrupt handling
iio: light: veml3235: fix scale to conform to ABI
iio: gts-helper: add helpers to ease searches of gain_sel and new_gain
iio: light: veml3235: extend regmap to add cache
iio: light: veml3235: fix code style
dt-bindings: iio: accel: adxl345: add interrupt-names
dt-bindings: iio: accel: adxl345: make interrupts not a required property
dt-bindings: iio: imu: bmi323: add boolean type for drive-open-drain
dt-bindings: iio: imu: bmi270: add boolean type for drive-open-drain
dt-bindings: iio: imu: bmi160: add boolean type for drive-open-drain
iio: adc: meson: simplify MESON_SAR_ADC_REG11 register access
iio: adc: meson: use tabs instead of spaces for some REG11 bit fields
iio: adc: meson: fix voltage reference selection field name typo
iio: adc: rockchip: correct alignment of timestamp
iio: imu: inv_icm42600: switch timestamp type from int64_t __aligned(8) to aligned_s64
...
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/coresight/linux into char-misc-next
Pull coresight updates from Suzuki:
coresight: Updates for Linux v6.14
Coresight self-hosted tracing subsystem updates for v6.14 includes:
- Support for static traceid allocation for devices
- Support for impdef, static trace filtering in Qualcomm replicators
- Miscellaneous fixes
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
* tag 'coresight-next-v6.14' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/coresight/linux:
coresight-tpda: Optimize the function of reading element size
coresight: Add support for trace filtering by source
coresight: Add a helper to check if a device is source
dt-bindings: arm: qcom,coresight-static-replicator: Add property for source filtering
coresight: Fix dsb_mode_store() unsigned val is never less than zero
coresight: dummy: Add static trace id support for dummy source
coresight: Add support to get static id for system trace sources
dt-bindings: arm: Add arm,static-trace-id for coresight dummy source
coresight: Drop atomics in connection refcounts
Coresight: Narrow down the matching range of tpdm
|
|
So far we notify the sequencer client and port changes upon UMP FB
changes, but those aren't really corresponding to the UMP updates.
e.g. when a FB info gets updated, it's not notified but done only when
some of sequencer port attribute is changed. This is no ideal
behavior.
This patch adds the two new sequencer event types for notifying the
UMP EP and FB changes via the announce port. The new event takes
snd_seq_ev_ump_notify type data, which is compatible with
snd_seq_addr (where the port number is replaced with the block
number).
The events are sent when the EP and FB info gets updated explicitly
via ioctl, or the backend UMP receives the corresponding UMP
messages.
The sequencer protocol version is bumped to 1.0.5 along with it.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250110155943.31578-9-tiwai@suse.de
|
|
Bump the protocol version to 2.0.5, as we extended the rawmidi ABI for
the new tied_device info and the substream inactive flag.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250110155943.31578-4-tiwai@suse.de
|
|
The UMP legacy rawmidi may turn on/off the substream dynamically
depending on the UMP Function Block information. So far, there was no
direct way to know whether the substream is disabled (inactive) or
not; at most one can take a look at the substream name string or try
to open and get -ENODEV.
This patch extends the rawmidi info ioctl to show the current inactive
state of the given substream. When the selected substream is
inactive, info flags field contains the new bit flag
SNDRV_RAWMIDI_INFO_STREAM_INACTIVE.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250110155943.31578-3-tiwai@suse.de
|
|
The UMP legacy rawmidi is derived from the UMP rawmidi, but currently
there is no way to know which device is involved in other side.
This patch extends the rawmidi info ioctl to show the tied device
number. As default it stores -1, indicating that no tied device.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20250110155943.31578-2-tiwai@suse.de
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: three small bugfixes
Fix a latent bug when the kernel is compiled in debug mode.
Two small UCONTROL fixes and their selftests.
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 changes for 6.13, part #3
- Always check page state in hyp_ack_unshare()
- Align set_id_regs selftest with the fact that ASIDBITS field is RO
- Various vPMU fixes for bugs that only affect nested virt
|
|
Add nic_cap_reg and vhca_icm_ctrl registers interfaces for exposing ICM
consumption.
Signed-off-by: Akiva Goldberger <agoldberger@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250109204231.1809851-5-tariqt@nvidia.com
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Read and cache SHAMPO specific caps for header data split capabilities.
Will be used in downstream patch.
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250109204231.1809851-4-tariqt@nvidia.com
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Management Real Time Clock Query (MRTCQ) register is used to query
hardware clock identity.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250109204231.1809851-3-tariqt@nvidia.com
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
Add FEC admin and override related fields in PPLM, and the bit in PCAM
to indicate those fields are supported.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250109204231.1809851-2-tariqt@nvidia.com
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
If the <kunit/platform_device.h> header is included in a test without
certain other headers, it produces compiler warnings like:
In file included from [...]
../include/kunit/platform_device.h:15:57: warning: ‘struct completion’
declared inside parameter list will not be visible outside of this
definition or declaration
15 | struct completion *x);
| ^~~~~~~~~~
Add a 'struct completion' forward declaration to resolve this.
Signed-off-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
|
|
Move kvfree_rcu() functionality to the slab_common.c file.
The reason to have kvfree_rcu() functionality as part of SLAB is that
there is a clear trend and need of closer integration. One of the recent
example is creating a barrier function for SLAB caches.
Another reason is to prevent of having several implementations of RCU
machinery for reclaiming objects after a GP. As future steps, it can be
more integrated(easier) with SLAB internals.
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Acked-by: Hyeonggon Yoo <hyeonggon.yoo@sk.com>
Tested-by: Hyeonggon Yoo <hyeonggon.yoo@sk.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Introduce a separate initialization of kvfree_rcu() functionality.
For such purpose a kfree_rcu_batch_init() is renamed to a kvfree_rcu_init()
and it is invoked from the main.c right after rcu_init() is done.
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Acked-by: Hyeonggon Yoo <hyeonggon.yoo@sk.com>
Tested-by: Hyeonggon Yoo <hyeonggon.yoo@sk.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"Over the Christmas break a couple of devicetree fixes came in for
Rockchips, Qualcomm and NXP/i.MX. These add some missing board
specific properties, address build time warnings,
The USB/TOG supoprt on X1 Elite regressed, so two earlier DT changes
get reverted for now.
Aside from the devicetree fixes, there is One build fix for the stm32
firewall driver, and a defconfig change to enable SPDIF support for
i.MX"
* tag 'soc-fixes-6.13-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
firewall: remove misplaced semicolon from stm32_firewall_get_firewall
arm64: dts: rockchip: add hevc power domain clock to rk3328
arm64: dts: rockchip: Fix the SD card detection on NanoPi R6C/R6S
arm64: dts: qcom: sa8775p: fix the secure device bootup issue
Revert "arm64: dts: qcom: x1e80100: enable OTG on USB-C controllers"
Revert "arm64: dts: qcom: x1e80100-crd: enable otg on usb ports"
arm64: dts: qcom: x1e80100: Fix up BAR space size for PCIe6a
Revert "arm64: dts: qcom: x1e78100-t14s: enable otg on usb-c ports"
ARM: dts: imxrt1050: Fix clocks for mmc
ARM: imx_v6_v7_defconfig: enable SND_SOC_SPDIF
arm64: dts: imx95: correct the address length of netcmix_blk_ctrl
arm64: dts: imx8-ss-audio: add fallback compatible string fsl,imx6ull-esai for esai
arm64: dts: rockchip: rename rfkill label for Radxa ROCK 5B
arm64: dts: rockchip: add reset-names for combphy on rk3568
arm64: dts: qcom: sa8775p: Fix the size of 'addr_space' regions
|
|
The NVMe specifications mandate support for the host identifier
set_features for controllers that also supports reservations. Satisfy
this requirement by implementing handling of the NVME_FEAT_HOST_ID
feature for the nvme_set_features command. This implementation is for
now effective only for PCI target controllers. For other controller
types, the set features command is failed with a NVME_SC_CMD_SEQ_ERROR
status as before.
As noted in the code, 128 bits host identifiers are supported since the
NVMe base specifications version 2.1 indicate in section 5.1.25.1.28.1
that "The controller may support a 64-bit Host Identifier...".
The RHII (Reservations and Host Identifier Interaction) bit of the
controller attribute (ctratt) field of the identify controller data is
also set to indicate that a host ID of "0" is supported but that the
host ID must be a non-zero value to use reservations.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
Define the transport type NVMF_TRTYPE_PCI for PCI endpoint targets.
This transport type is defined using the value 0 which is reserved in
the NVMe base specifications v2.1 (Figure 294). Given that struct
nvmet_port are zeroed out on creation, to avoid having this transsport
type becoming the new default, nvmet_referral_make() and
nvmet_ports_make() are modified to initialize a port discovery address
transport type field (disc_addr.trtype) to NVMF_TRTYPE_MAX.
Any port using this transport type is also skipped and not reported in
the discovery log page (nvmet_execute_disc_get_log_page()).
The helper function nvmet_is_pci_ctrl() is also introduced to check if
a target controller uses the PCI transport.
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Rick Wertenbroek <rick.wertenbroek@gmail.com>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
