Age | Commit message (Collapse) | Author |
|
Besides the fact that (old) drivers use wrong definitions, e.g.,
GPIOF_INIT_HIGH instead of GPIOF_OUT_INIT_HIGH, shrink the legacy
definitions by killing those GPIOF_INIT_* completely.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20240828142554.2424189-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into soc/drivers
Memory controller drivers for v6.12
1. Tegra210 EMC: Driver refactoring and rework.
2. Tegra186 EMC: Drop unused function.
3. FSL WEIM: Correct fsl,weim-cs-timing property to properly validate it
as an array.
4. TI AEMIF: Drop platform data support.
5. TI EMIF: Switch to of_property_read_bool().
6. Several cleanups in multiple drivers: TI AEMIF and EMIF, Tegra
EMC/MC, Atmel EBI, Samsung Exynos5422 DMC, STM32 FMC2 EBI, OMAP GPMC,
PL172 and PL1353 SMC. These are mostly code simplifying around
probe() like using
- devm_clk_get_enabled(),
- dev_err_probe(),
- scoped device node handling (cleanup.h),
- scoped for each OF child loops,
- scoped/guard locks.
* tag 'memory-controller-drv-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl: (35 commits)
memory: mtk-smi: Use devm_clk_get_enabled()
memory: pl353-smc: simplify with devm_clk_get_enabled()
memory: pl353-smc: simplify with dev_err_probe()
memory: pl172: simplify with devm_clk_get_enabled()
memory: pl172: simplify with dev_err_probe()
memory: omap-gpmc: simplify locking with guard()
memory: emif: simplify locking with guard()
memory: emif: drop unused 'irq_state' member
memory: ti-aemif: Revert "memory: ti-aemif: don't needlessly iterate over child nodes"
memory: ti-aemif: simplify with scoped for each OF child loop
memory: ti-aemif: simplify with dev_err_probe()
memory: tegra30-emc: simplify with scoped for each OF child loop
memory: tegra20-emc: simplify with scoped for each OF child loop
memory: tegra124-emc: simplify with scoped for each OF child loop
memory: tegra-mc: simplify with scoped for each OF child loop
memory: stm32-fmc2-ebi: simplify with dev_err_probe()
memory: stm32-fmc2-ebi: simplify with scoped for each OF child loop
memory: samsung: exynos5422-dmc: use scoped device node handling to simplify error paths
memory: samsung: exynos5422-dmc: simplify dmc->dev usage
memory: atmel-ebi: simplify with scoped for each OF child loop
...
Link: https://lore.kernel.org/r/20240827122926.30794-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Document the device tree bindings for the Renesas RZ/V2H(P) SoC
Clock Pulse Generator (CPG).
CPG block handles the below operations:
- Generation and control of clock signals for the IP modules
- Generation and control of resets
- Control over booting
- Low power consumption and power supply domains
Also define constants for the core clocks of the RZ/V2H(P) SoC. Note the
core clocks are a subset of the ones which are listed as part of section
4.4.2 of HW manual Rev.1.01 which cannot be controlled by CLKON register.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20240729202645.263525-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
There are no more board files defining platform data for this driver so
remove the header and support from the driver.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240821121456.19553-4-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
- x2apic_disable() clears x2apic_state and x2apic_mode unconditionally,
even when the state is X2APIC_ON_LOCKED, which prevents the kernel to
disable it thereby creating inconsistent state.
Reorder the logic so it actually works correctly
- The XSTATE logic for handling LBR is incorrect as it assumes that
XSAVES supports LBR when the CPU supports LBR. In fact both
conditions need to be true. Otherwise the enablement of LBR in the
IA32_XSS MSR fails and subsequently the machine crashes on the next
XRSTORS operation because IA32_XSS is not initialized.
Cache the XSTATE support bit during init and make the related
functions use this cached information and the LBR CPU feature bit to
cure this.
- Cure a long standing bug in KASLR
KASLR uses the full address space between PAGE_OFFSET and vaddr_end
to randomize the starting points of the direct map, vmalloc and
vmemmap regions. It thereby limits the size of the direct map by
using the installed memory size plus an extra configurable margin for
hot-plug memory. This limitation is done to gain more randomization
space because otherwise only the holes between the direct map,
vmalloc, vmemmap and vaddr_end would be usable for randomizing.
The limited direct map size is not exposed to the rest of the kernel,
so the memory hot-plug and resource management related code paths
still operate under the assumption that the available address space
can be determined with MAX_PHYSMEM_BITS.
request_free_mem_region() allocates from (1 << MAX_PHYSMEM_BITS) - 1
downwards. That means the first allocation happens past the end of
the direct map and if unlucky this address is in the vmalloc space,
which causes high_memory to become greater than VMALLOC_START and
consequently causes iounmap() to fail for valid ioremap addresses.
Cure this by exposing the end of the direct map via PHYSMEM_END and
use that for the memory hot-plug and resource management related
places instead of relying on MAX_PHYSMEM_BITS. In the KASLR case
PHYSMEM_END maps to a variable which is initialized by the KASLR
initialization and otherwise it is based on MAX_PHYSMEM_BITS as
before.
- Prevent a data leak in mmio_read(). The TDVMCALL exposes the value of
an initialized variabled on the stack to the VMM. The variable is
only required as output value, so it does not have to exposed to the
VMM in the first place.
- Prevent an array overrun in the resource control code on systems with
Sub-NUMA Clustering enabled because the code failed to adjust the
index by the number of SNC nodes per L3 cache.
* tag 'x86-urgent-2024-09-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/resctrl: Fix arch_mbm_* array overrun on SNC
x86/tdx: Fix data leak in mmio_read()
x86/kaslr: Expose and use the end of the physical memory address space
x86/fpu: Avoid writing LBR bit to IA32_XSS unless supported
x86/apic: Make x2apic_disable() work correctly
|
|
Pull smb client fixes from Steve French:
- copy_file_range fix
- two read fixes including read past end of file rc fix and read retry
crediting fix
- falloc zero range fix
* tag 'v6.11-rc5-smb-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: Fix FALLOC_FL_ZERO_RANGE to preflush buffered part of target region
cifs: Fix copy offload to flush destination region
netfs, cifs: Fix handling of short DIO read
cifs: Fix lack of credit renegotiation on read retry
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"There is a fairly large number of bug fixes for Qualcomm platforms,
most of them addressing issues with the devicetree files for the newly
added Snapdragon X1 based laptops to make them more reliable.
The Qualcomm driver changes address a few build-time issues as well as
runtime problems in the tzmem and scm firmware, the USB Type-C driver,
and the cmd-db and pmic_glink soc drivers.
The NXP i.MX usually gets a bunch of devicetree fixes that is
proportional to the number of supported machines. This includes both
warning fixes and correctness for the 64-bit i.MX9, i.MX8 and
layerscape platforms, as well as a single fix for a 32-bit i.MX6 based
board.
The other changes are the usual minor changes, including an update to
the MAINTAINERS file, an omap3 dts file and a SoC driver for mpfs
(risc-v)"
* tag 'arm-fixes-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (50 commits)
firmware: microchip: fix incorrect error report of programming:timeout on success
soc: qcom: pd-mapper: Fix singleton refcount
firmware: qcom: tzmem: disable sdm670 platform
soc: qcom: pmic_glink: Actually communicate when remote goes down
usb: typec: ucsi: Move unregister out of atomic section
soc: qcom: pmic_glink: Fix race during initialization
firmware: qcom: qseecom: remove unused functions
firmware: qcom: tzmem: fix virtual-to-physical address conversion
firmware: qcom: scm: Mark get_wq_ctx() as atomic call
arm64: dts: qcom: x1e80100: Fix Adreno SMMU global interrupt
arm64: dts: qcom: disable GPU on x1e80100 by default
arm64: dts: imx8mm-phygate: fix typo pinctrcl-0
arm64: dts: imx95: correct L3Cache cache-sets
arm64: dts: imx95: correct a55 power-domains
arm64: dts: freescale: imx93-tqma9352-mba93xxla: fix typo
arm64: dts: freescale: imx93-tqma9352: fix CMA alloc-ranges
ARM: dts: imx6dl-yapp43: Increase LED current to match the yapp4 HW design
arm64: dts: imx93: update default value for snps,clk-csr
arm64: dts: freescale: tqma9352: Fix watchdog reset
arm64: dts: imx8mp-beacon-kit: Fix Stereo Audio on WM8962
...
|
|
The function returns a value that is used to initialize 'flowi4_tos'
before being passed to the FIB lookup API in the following call chain:
xfrm_bundle_create()
tos = xfrm_get_tos(fl, family)
xfrm_dst_lookup(..., tos, ...)
__xfrm_dst_lookup(..., tos, ...)
xfrm4_dst_lookup(..., tos, ...)
__xfrm4_dst_lookup(..., tos, ...)
fl4->flowi4_tos = tos
__ip_route_output_key(net, fl4)
Unmask the upper DSCP bits so that in the future the output route lookup
could be performed according to the full DSCP value.
Remove IPTOS_RT_MASK since it is no longer used.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The function is used by a few socket types to retrieve the TOS value
with which to perform the FIB lookup for packets sent through the socket
(flowi4_tos). If a DS field was passed using the IP_TOS control message,
then it is used. Otherwise the one specified via the IP_TOS socket
option.
Unmask the upper DSCP bits so that in the future the lookup could be
performed according to the full DSCP value.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The function is used to read the DS field that was stored in IPv4
sockets via the IP_TOS socket option so that it could be used to
initialize the flowi4_tos field before resolving an output route.
Unmask the upper DSCP bits so that in the future the output route lookup
could be performed according to the full DSCP value.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This reverts commit 59b047bc98084f8af2c41483e4d68a5adf2fa7f7 which
breaks compatibility with commands like:
bluetoothd[46328]: @ MGMT Command: Load.. (0x0013) plen 74 {0x0001} [hci0]
Keys: 2
BR/EDR Address: C0:DC:DA:A5:E5:47 (Samsung Electronics Co.,Ltd)
Key type: Authenticated key from P-256 (0x03)
Central: 0x00
Encryption size: 16
Diversifier[2]: 0000
Randomizer[8]: 0000000000000000
Key[16]: 6ed96089bd9765be2f2c971b0b95f624
LE Address: D7:2A:DE:1E:73:A2 (Static)
Key type: Unauthenticated key from P-256 (0x02)
Central: 0x00
Encryption size: 16
Diversifier[2]: 0000
Randomizer[8]: 0000000000000000
Key[16]: 87dd2546ededda380ffcdc0a8faa4597
@ MGMT Event: Command Status (0x0002) plen 3 {0x0001} [hci0]
Load Long Term Keys (0x0013)
Status: Invalid Parameters (0x0d)
Cc: stable@vger.kernel.org
Link: https://github.com/bluez/bluez/issues/875
Fixes: 59b047bc9808 ("Bluetooth: MGMT/SMP: Fix address type when using SMP over BREDR/LE")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
This introduces hci_cmd_sync_run/hci_cmd_sync_run_once which acts like
hci_cmd_sync_queue/hci_cmd_sync_queue_once but runs immediately when
already on hdev->cmd_sync_work context.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Correct spelling in nl802154.h.
As reported by codespell.
Signed-off-by: Simon Horman <horms@kernel.org>
Message-ID: <20240829-wpan-spell-v1-2-799d840e02c4@kernel.org>
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
Correct spelling in mac802154.h.
As reported by codespell.
Signed-off-by: Simon Horman <horms@kernel.org>
Message-ID: <20240829-wpan-spell-v1-1-799d840e02c4@kernel.org>
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
|
|
This patch introduces CONFIG_CPUSETS_V1 and guard cpuset-v1 code under
CONFIG_CPUSETS_V1. The default value of CONFIG_CPUSETS_V1 is N, so that
user who adopted v2 don't have 'pay' for cpuset v1.
Signed-off-by: Chen Ridong <chenridong@huawei.com>
Acked-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Useful to preallocate dma fence array and then arm in path of reclaim or
a dma fence.
v2:
- s/arm/init (Christian)
- Drop !array warn (Christian)
v3:
- Fix kernel doc typos (dim)
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240826170144.2492062-2-matthew.brost@intel.com
|
|
Previous patch made ICMP rate limits per netns, it makes sense
to allow each netns to change the associated sysctl.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240829144641.3880376-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Host wide ICMP ratelimiter should be per netns, to provide better isolation.
Following patch in this series makes the sysctl per netns.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20240829144641.3880376-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
ICMP messages are ratelimited :
After the blamed commits, the two rate limiters are applied in this order:
1) host wide ratelimit (icmp_global_allow())
2) Per destination ratelimit (inetpeer based)
In order to avoid side-channels attacks, we need to apply
the per destination check first.
This patch makes the following change :
1) icmp_global_allow() checks if the host wide limit is reached.
But credits are not yet consumed. This is deferred to 3)
2) The per destination limit is checked/updated.
This might add a new node in inetpeer tree.
3) icmp_global_consume() consumes tokens if prior operations succeeded.
This means that host wide ratelimit is still effective
in keeping inetpeer tree small even under DDOS.
As a bonus, I removed icmp_global.lock as the fast path
can use a lock-free operation.
Fixes: c0303efeab73 ("net: reduce cycles spend on ICMP replies that gets rate limited")
Fixes: 4cdf507d5452 ("icmp: add a global rate limitation")
Reported-by: Keyu Man <keyu.man@email.ucr.edu>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Cc: Jesper Dangaard Brouer <hawk@kernel.org>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20240829144641.3880376-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux
Pull iommu fixes from Joerg Roedel:
- Fix a device-stall problem in bad io-page-fault setups (faults
received from devices with no supporting domain attached).
- Context flush fix for Intel VT-d.
- Do not allow non-read+non-write mapping through iommufd as most
implementations can not handle that.
- Fix a possible infinite-loop issue in map_pages() path.
- Add Jean-Philippe as reviewer for SMMUv3 SVA support
* tag 'iommu-fixes-v6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
MAINTAINERS: Add Jean-Philippe as SMMUv3 SVA reviewer
iommu: Do not return 0 from map_pages if it doesn't do anything
iommufd: Do not allow creating areas without READ or WRITE
iommu/vt-d: Fix incorrect domain ID in context flush helper
iommu: Handle iommu faults for a bad iopf setup
|
|
The gpmc_onenand_init() have been removed since
commit 2514830b8b8c ("ARM: OMAP2+: Remove gpmc-onenand"), and now
it is useless, so remove it.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lore.kernel.org/r/20240826035823.4043171-1-cuigaosheng1@huawei.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
This adds extra parameters that affect UBWC tiling that will be used by
the Mesa implementation of VK_EXT_host_image_copy.
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/607401/
Signed-off-by: Rob Clark <robdclark@chromium.org>
|
|
Introduce a device-managed variant of register_framebuffer() which
automatically unregisters the framebuffer on device destruction.
This can simplify the error handling and resource management in drivers.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Helge Deller <deller@gmx.de>
|
|
pKVM relies on hypercalls to expose services such as memory sharing to
protected guests. Tentatively allocate a block of 58 hypercalls (i.e.
fill the remaining space in the first 64 function IDs) for pKVM usage,
as future extensions such as pvIOMMU support, range-based memory sharing
and validation of assigned devices will require additional services.
Suggested-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/86a5h5yg5y.wl-maz@kernel.org
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240830130150.8568-8-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Hook up pKVM's MMIO_GUARD hypercall so that ioremap() and friends will
register the target physical address as MMIO with the hypervisor,
allowing guest exits to that page to be emulated by the host with full
syndrome information.
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240830130150.8568-7-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
If we detect the presence of pKVM's SHARE and UNSHARE hypercalls, then
register a backend implementation of the mem_encrypt API so that things
like DMA buffers can be shared appropriately with the host.
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240830130150.8568-5-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Implement a pKVM protected guest driver to probe the presence of pKVM
and determine the memory protection granule using the HYP_MEMINFO
hypercall.
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240830130150.8568-3-will@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
|
|
When adding devm_regulator_bulk_get_const() I missed adding a stub for
when CONFIG_REGULATOR is not enabled. Under certain conditions (like
randconfig testing) this can cause the compiler to reports errors
like:
error: implicit declaration of function 'devm_regulator_bulk_get_const';
did you mean 'devm_regulator_bulk_get_enable'?
Add the stub.
Fixes: 1de452a0edda ("regulator: core: Allow drivers to define their init data as const")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202408301813.TesFuSbh-lkp@intel.com/
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20240830073511.1.Ib733229a8a19fad8179213c05e1af01b51e42328@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
There is only one called of alloc_page_buffers and it doesn't require
__GFP_NOFAIL so drop this allocation mode.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Link: https://lore.kernel.org/r/20240829130640.1397970-1-mhocko@kernel.org
Acked-by: Song Liu <song@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
PCI ATS has a global Smallest Translation Unit field that is located in
the PF but shared by all of the VFs.
The expectation is that the STU will be set to the root port's global STU
capability which is driven by the IO page table configuration of the iommu
HW. Today it becomes set when the iommu driver first enables ATS.
Thus, to enable ATS on the VF, the PF must have already had the correct
STU programmed, even if ATS is off on the PF.
Unfortunately the PF only programs the STU when the PF enables ATS. The
iommu drivers tend to leave ATS disabled when IDENTITY translation is
being used.
Thus we can get into a state where the PF is setup to use IDENTITY with
the DMA API while the VF would like to use VFIO with a PAGING domain and
have ATS turned on. This fails because the PF never loaded a PAGING domain
and so it never setup the STU, and the VF can't do it.
The simplest solution is to have the iommu driver set the ATS STU when it
probes the device. This way the ATS STU is loaded immediately at boot time
to all PFs and there is no issue when a VF comes to use it.
Add a new call pci_prepare_ats() which should be called by iommu drivers
in their probe_device() op for every PCI device if the iommu driver
supports ATS. This will setup the STU based on whatever page size
capability the iommu HW has.
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/0-v1-0fb4d2ab6770+7e706-ats_vf_jgg@nvidia.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Use perf_allow_kernel() for 'pa_enable' (physical addresses),
'pct_enable' (physical timestamps) and context IDs. This means that
perf_event_paranoid is now taken into account and LSM hooks can be used,
which is more consistent with other perf_event_open calls. For example
PERF_SAMPLE_PHYS_ADDR uses perf_allow_kernel() rather than just
perfmon_capable().
This also indirectly fixes the following error message which is
misleading because perf_event_paranoid is not taken into account by
perfmon_capable():
$ perf record -e arm_spe/pa_enable/
Error:
Access to performance monitoring and observability operations is
limited. Consider adjusting /proc/sys/kernel/perf_event_paranoid
setting ...
Suggested-by: Al Grant <al.grant@arm.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Link: https://lore.kernel.org/r/20240827145113.1224604-1-james.clark@linaro.org
Link: https://lore.kernel.org/all/20240807120039.GD37996@noisy.programming.kicks-ass.net/
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Currently, the show_inode_state() macro only prints
part of the state of inode->i_state. Let’s improve it
to display more of its state.
Signed-off-by: Julian Sun <sunjunchao2870@gmail.com>
Link: https://lore.kernel.org/r/20240828081359.62429-1-sunjunchao2870@gmail.com
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Now that we use the wait var event mechanism make i_state a u32 and free
up 4 bytes. This means we currently have two 4 byte holes in struct
inode which we can pack.
Link: https://lore.kernel.org/r/20240823-work-i_state-v3-6-5cd5fd207a57@kernel.org
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Port the __I_NEW mechanism to use the new var event mechanism.
Link: https://lore.kernel.org/r/20240823-work-i_state-v3-4-5cd5fd207a57@kernel.org
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
so that we can use the first bits to derive unique addresses from
i_state.
Link: https://lore.kernel.org/r/20240823-work-i_state-v3-2-5cd5fd207a57@kernel.org
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The i_state member is an unsigned long so that it can be used with the
wait bit infrastructure which expects unsigned long. This wastes 4 bytes
which we're unlikely to ever use. Switch to using the var event wait
mechanism using the address of the bit. Thanks to Linus for the address
idea.
Link: https://lore.kernel.org/r/20240823-work-i_state-v3-1-5cd5fd207a57@kernel.org
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The underscore variants are for uapi whereas the non-underscore variants
are for in-kernel consumers.
Link: https://lore.kernel.org/r/20240822-anwerben-nutzung-1cd6c82a565f@brauner
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This helper has been unused for a while now.
Link: https://lore.kernel.org/r/20240822-bewuchs-werktag-46672b3c0606@brauner
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Afaict, we can just rely on inode->i_dio_count for waiting instead of
this awkward indirection through __I_DIO_WAKEUP. This survives LTP dio
and xfstests dio tests.
Link: https://lore.kernel.org/r/20240816-vfs-misc-dio-v1-1-80fe21a2c710@kernel.org
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add ability to set per-dentry mount expire timeout to autofs.
There are two fairly well known automounter map formats, the autofs
format and the amd format (more or less System V and Berkley).
Some time ago Linux autofs added an amd map format parser that
implemented a fair amount of the amd functionality. This was done
within the autofs infrastructure and some functionality wasn't
implemented because it either didn't make sense or required extra
kernel changes. The idea was to restrict changes to be within the
existing autofs functionality as much as possible and leave changes
with a wider scope to be considered later.
One of these changes is implementing the amd options:
1) "unmount", expire this mount according to a timeout (same as the
current autofs default).
2) "nounmount", don't expire this mount (same as setting the autofs
timeout to 0 except only for this specific mount) .
3) "utimeout=<seconds>", expire this mount using the specified
timeout (again same as setting the autofs timeout but only for
this mount).
To implement these options per-dentry expire timeouts need to be
implemented for autofs indirect mounts. This is because all map keys
(mounts) for autofs indirect mounts use an expire timeout stored in
the autofs mount super block info. structure and all indirect mounts
use the same expire timeout.
Now I have a request to add the "nounmount" option so I need to add
the per-dentry expire handling to the kernel implementation to do this.
The implementation uses the trailing path component to identify the
mount (and is also used as the autofs map key) which is passed in the
autofs_dev_ioctl structure path field. The expire timeout is passed
in autofs_dev_ioctl timeout field (well, of the timeout union).
If the passed in timeout is equal to -1 the per-dentry timeout and
flag are cleared providing for the "unmount" option. If the timeout
is greater than or equal to 0 the timeout is set to the value and the
flag is also set. If the dentry timeout is 0 the dentry will not expire
by timeout which enables the implementation of the "nounmount" option
for the specific mount. When the dentry timeout is greater than zero it
allows for the implementation of the "utimeout=<seconds>" option.
Signed-off-by: Ian Kent <raven@themaw.net>
Link: https://lore.kernel.org/r/20240814090231.963520-1-raven@themaw.net
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This is another flag that is statically set and doesn't need to use up
an FMODE_* bit. Move it to ->fop_flags and free up another FMODE_* bit.
(1) mem_open() used from proc_mem_operations
(2) adi_open() used from adi_fops
(3) drm_open_helper():
(3.1) accel_open() used from DRM_ACCEL_FOPS
(3.2) drm_open() used from
(3.2.1) amdgpu_driver_kms_fops
(3.2.2) psb_gem_fops
(3.2.3) i915_driver_fops
(3.2.4) nouveau_driver_fops
(3.2.5) panthor_drm_driver_fops
(3.2.6) radeon_driver_kms_fops
(3.2.7) tegra_drm_fops
(3.2.8) vmwgfx_driver_fops
(3.2.9) xe_driver_fops
(3.2.10) DRM_GEM_FOPS
(3.2.11) DEFINE_DRM_GEM_DMA_FOPS
(4) struct memdev sets fmode flags based on type of device opened. For
devices using struct mem_fops unsigned offset is used.
Mark all these file operations as FOP_UNSIGNED_OFFSET and add asserts
into the open helper to ensure that the flag is always set.
Link: https://lore.kernel.org/r/20240809-work-fop_unsigned-v1-1-658e054d893e@kernel.org
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
In do_dentry_open() the usage is:
f->f_op = fops_get(inode->i_fop);
In generated asm the compiler emits 2 reads from inode->i_fop instead of
just one.
This popped up due to false-sharing where loads from that offset end up
bouncing a cacheline during parallel open. While this is going to be fixed,
the spurious load does not need to be there.
This makes do_dentry_open() go down from 1177 to 1154 bytes.
fops_put() is patched to maintain some consistency.
No functional changes.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20240810064753.1211441-1-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
These inlines show up in the fast path (e.g., in do_dentry_open()) and
induce said full barrier regarding i_flctx access when in most cases the
pointer is NULL.
The pointer can be safely checked before issuing the barrier, dodging it
in most cases as a result.
It is plausible the consume fence would be sufficient, but I don't want
to go audit all callers regarding what they before calling here.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20240806172846.886570-1-mjguzik@gmail.com
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/i915/kernel into drm-next
Cross-driver (xe-core) Changes:
- Require BMG scanout buffers to be 64k physically aligned (Maarten)
Core (drm) Changes:
- Introducing Xe2 ccs modifiers for integrated and discrete graphics (Juha-Pekka)
Driver Changes:
- General cleanup and more work moving towards intel_display isolation (Jani)
- New display workaround (Suraj)
- Use correct cp_irq_count on HDCP (Suraj)
- eDP PSR fix when CRC is enabled (Jouni)
- Fix DP MST state after a sink reset (Imre)
- Fix Arrow Lake GSC firmware version (John)
- Use chained DSBs for LUT programming (Ville)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZtCC0lJ0Zf3MoSdW@intel.com
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
UAPI Changes:
- Fix OA format masks which were breaking build with gcc-5
Cross-subsystem Changes:
Driver Changes:
- Use dma_fence_chain_free in chain fence unused as a sync (Matthew Brost)
- Refactor hw engine lookup and mmio access to be used in more places
(Dominik, Matt Auld, Mika Kuoppala)
- Enable priority mem read for Xe2 and later (Pallavi Mishra)
- Fix PL1 disable flow in xe_hwmon_power_max_write (Karthik)
- Fix refcount and speedup devcoredump (Matthew Brost)
- Add performance tuning changes to Xe2 (Akshata, Shekhar)
- Fix OA sysfs entry (Ashutosh)
- Add first GuC firmware support for BMG (Julia)
- Bump minimum GuC firmware for platforms under force_probe to match LNL
and BMG (Julia)
- Fix access check on user fence creation (Nirmoy)
- Add/document workarounds for Xe2 (Julia, Daniele, John, Tejas)
- Document workaround and use proper WA infra (Matt Roper)
- Fix VF configuration on media GT (Michal Wajdeczko)
- Fix VM dma-resv lock (Matthew Brost)
- Allow suspend/resume exec queue backend op to be called multiple times
(Matthew Brost)
- Add GT stats to debugfs (Nirmoy)
- Add hwconfig to debugfs (Matt Roper)
- Compile out all debugfs code with ONFIG_DEUBG_FS=n (Lucas)
- Remove dead kunit code (Jani Nikula)
- Refactor drvdata storing to help display (Jani Nikula)
- Cleanup unsused xe parameter in pte handling (Himal)
- Rename s/enable_display/probe_display/ for clarity (Lucas)
- Fix missing MCR annotation in couple of registers (Tejas)
- Fix DGFX display suspend/resume (Maarten)
- Prepare exec_queue_kill for PXP handling (Daniele)
- Fix devm/drmm issues (Daniele, Matthew Brost)
- Fix tile and ggtt fini sequences (Matthew Brost)
- Fix crashes when probing without firmware in place (Daniele, Matthew Brost)
- Use xe_managed for kernel BOs (Daniele, Matthew Brost)
- Future-proof dss_per_group calculation by using hwconfig (Matt Roper)
- Use reserved copy engine for user binds on faulting devices
(Matthew Brost)
- Allow mixing dma-fence jobs and long-running faulting jobs (Francois)
- Cleanup redundant arg when creating use BO (Nirmoy)
- Prevent UAF around preempt fence (Auld)
- Fix display suspend/resume (Maarten)
- Use vma_pages() helper (Thorsten)
- Calculate pagefault queue size (Stuart, Matthew Auld)
- Fix missing pagefault wq destroy (Stuart)
- Fix lifetime handling of HW fence ctx (Matthew Brost)
- Fix order destroy order for jobs (Matthew Brost)
- Fix TLB invalidation for media GT (Matthew Brost)
- Document GGTT (Rodrigo Vivi)
- Refactor GGTT layering and fix runtime outer protection (Rodrigo Vivi)
- Handle HPD polling on display pm runtime suspend/resume (Imre, Vinod)
- Drop unrequired NULL checks (Apoorva, Himal)
- Use separate rpm lockdep map for non-d3cold-capable devices (Thomas Hellström)
- Support "nomodeset" kernel command-line option (Thomas Zimmermann)
- Drop force_probe requirement for LNL and BMG (Lucas, Balasubramani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/wd42jsh4i3q5zlrmi2cljejohdsrqc6hvtxf76lbxsp3ibrgmz@y54fa7wwxgsd
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v6.12:
UAPI Changes:
devfs:
- support device numbers up to MINORBITS limit
Core Changes:
ci:
- increase job timeout
devfs:
- use XArray for minor ids
displayport:
- mst: GUID improvements
docs:
- add fixes and cleanups
panic:
- optionally display QR code
Driver Changes:
amdgpu:
- faster vblank disabling
- GUID improvements
gm12u320
- convert to struct drm_edid
host1x:
- fix syncpoint IRQ during resume
- use iommu_paging_domain_alloc()
imx:
- ipuv3: convert to struct drm_edid
omapdrm:
- improve error handling
panel:
- add support for BOE TV101WUM-LL2 plus DT bindings
- novatek-nt35950: improve error handling
- nv3051d: improve error handling
- panel-edp: add support for BOE NE140WUM-N6G; revert support for
SDC ATNA45AF01
- visionox-vtdr6130: improve error handling; use
devm_regulator_bulk_get_const()
renesas:
- rz-du: add support for RZ/G2UL plus DT bindings
sti:
- convert to struct drm_edid
tegra:
- gr3d: improve PM domain handling
- convert to struct drm_edid
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240829144654.GA145538@linux.fritz.box
|
|
Pull drm fixes from Dave Airlie:
"Another week, another set of GPU fixes. amdgpu and vmwgfx leading the
charge, then i915 and xe changes along with v3d and some other bits.
The TTM revert is due to some stuttering graphical apps probably due
to longer stalls while prefaulting.
Seems pretty much where I'd expect things,
ttm:
- revert prefault change, caused stutters
aperture:
- handle non-VGA devices bettter
amdgpu:
- SWSMU gaming stability fix
- SMU 13.0.7 fix
- SWSMU documentation alignment fix
- SMU 14.0.x fixes
- GC 12.x fix
- Display fix
- IP discovery fix
- SMU 13.0.6 fix
i915:
- Fix #11195: The external display connect via USB type-C dock stays
blank after re-connect the dock
- Make DSI backlight work for 2G version of Lenovo Yoga Tab 3 X90F
- Move ARL GuC firmware to correct version
xe:
- Invalidate media_gt TLBs
- Fix HWMON i1 power setup write command
vmwgfx:
- prevent unmapping active read buffers
- fix prime with external buffers
- disable coherent dumb buffers without 3d
v3d:
- disable preemption while updating GPU stats"
* tag 'drm-fixes-2024-08-30' of https://gitlab.freedesktop.org/drm/kernel:
drm/xe/hwmon: Fix WRITE_I1 param from u32 to u16
drm/v3d: Disable preemption while updating GPU stats
drm/amd/pm: Drop unsupported features on smu v14_0_2
drm/amd/pm: Add support for new P2S table revision
drm/amdgpu: support for gc_info table v1.3
drm/amd/display: avoid using null object of framebuffer
drm/amdgpu/gfx12: set UNORD_DISPATCH in compute MQDs
drm/amd/pm: update message interface for smu v14.0.2/3
drm/amdgpu/swsmu: always force a state reprogram on init
drm/amdgpu/smu13.0.7: print index for profiles
drm/amdgpu: align pp_power_profile_mode with kernel docs
drm/i915/dp_mst: Fix MST state after a sink reset
drm/xe: Invalidate media_gt TLBs
drm/i915: ARL requires a newer GSC firmware
drm/i915/dsi: Make Lenovo Yoga Tab 3 X90F DMI match less strict
video/aperture: optionally match the device in sysfb_disable()
drm/vmwgfx: Disable coherent dumb buffers without 3d
drm/vmwgfx: Fix prime with external buffers
drm/vmwgfx: Prevent unmapping active read buffers
Revert "drm/ttm: increase ttm pre-fault value to PMD size"
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
A revert for a previous TTM commit causing stuttering, 3 fixes for
vmwgfx related to buffer operations, a fix for video/aperture with
non-VGA primary devices, and a preemption status fix for v3d
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240829-efficient-swift-from-lemuria-f60c05@houat
|
|
Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/faraday/ftgmac100.c
4186c8d9e6af ("net: ftgmac100: Ensure tx descriptor updates are visible")
e24a6c874601 ("net: ftgmac100: Get link speed and duplex for NC-SI")
https://lore.kernel.org/0b851ec5-f91d-4dd3-99da-e81b98c9ed28@kernel.org
net/ipv4/tcp.c
bac76cf89816 ("tcp: fix forever orphan socket caused by tcp_abort")
edefba66d929 ("tcp: rstreason: introduce SK_RST_REASON_TCP_STATE for active reset")
https://lore.kernel.org/20240828112207.5c199d41@canb.auug.org.au
No adjacent changes.
Link: https://patch.msgid.link/20240829130829.39148-1-pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth, wireless and netfilter.
No known outstanding regressions.
Current release - regressions:
- wifi: iwlwifi: fix hibernation
- eth: ionic: prevent tx_timeout due to frequent doorbell ringing
Previous releases - regressions:
- sched: fix sch_fq incorrect behavior for small weights
- wifi:
- iwlwifi: take the mutex before running link selection
- wfx: repair open network AP mode
- netfilter: restore IP sanity checks for netdev/egress
- tcp: fix forever orphan socket caused by tcp_abort
- mptcp: close subflow when receiving TCP+FIN
- bluetooth: fix random crash seen while removing btnxpuart driver
Previous releases - always broken:
- mptcp: more fixes for the in-kernel PM
- eth: bonding: change ipsec_lock from spin lock to mutex
- eth: mana: fix race of mana_hwc_post_rx_wqe and new hwc response
Misc:
- documentation: drop special comment style for net code"
* tag 'net-6.11-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits)
nfc: pn533: Add poll mod list filling check
mailmap: update entry for Sriram Yagnaraman
selftests: mptcp: join: check re-re-adding ID 0 signal
mptcp: pm: ADD_ADDR 0 is not a new address
selftests: mptcp: join: validate event numbers
mptcp: avoid duplicated SUB_CLOSED events
selftests: mptcp: join: check re-re-adding ID 0 endp
mptcp: pm: fix ID 0 endp usage after multiple re-creations
mptcp: pm: do not remove already closed subflows
selftests: mptcp: join: no extra msg if no counter
selftests: mptcp: join: check re-adding init endp with != id
mptcp: pm: reset MPC endp ID when re-added
mptcp: pm: skip connecting to already established sf
mptcp: pm: send ACK on an active subflow
selftests: mptcp: join: check removing ID 0 endpoint
mptcp: pm: fix RM_ADDR ID for the initial subflow
mptcp: pm: reuse ID 0 after delete and re-add
net: busy-poll: use ktime_get_ns() instead of local_clock()
sctp: fix association labeling in the duplicate COOKIE-ECHO case
mptcp: pr_debug: add missing \n at the end
...
|