| Age | Commit message (Collapse) | Author |
|---|
|
Multi-PTP source support within a network topology has been merged,
but the hardware timestamp source is not yet exposed to users.
Currently, users only see the PTP index, which does not indicate
whether the timestamp comes from a PHY or a MAC.
Add support for reporting the hwtstamp source using a
hwtstamp-source field, alongside hwtstamp-phyindex, to describe
the origin of the hardware timestamp.
Remove HWTSTAMP_SOURCE_UNSPEC enum value as it is not used at all.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20250519-feature_ptp_source-v4-1-5d10e19a0265@bootlin.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Some GPIO chips allow to rise an IRQ on GPIO level changes but do not
provide an IRQ status for each separate line: only the current gpio
level can be retrieved.
Add support for these chips, emulating IRQ status by comparing GPIO
levels with the levels during the previous interrupt.
Signed-off-by: Mathieu Dubois-Briand <mathieu.dubois-briand@bootlin.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/20250522-mdb-max7360-support-v9-5-74fc03517e41@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Some places in the spi core pass in a const pointer to a device and the
default container_of() casts that away, which is not a good idea.
Preserve the proper const attribute by using container_of_const() for
to_spi_device() instead, which is what it was designed for.
Note, this removes the NULL check for a device pointer in the call, but
no one was ever checking for that return value, and a device pointer
should never be NULL overall anyway, so this should be a safe change.
Cc: Mark Brown <broonie@kernel.org>
Fixes: d69d80484598 ("driver core: have match() callback in struct bus_type take a const *")
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/2025052230-fidgeting-stooge-66f5@gregkh
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Instead of filling in the regulator description programatically,
store the data in a struct. This will make it a bit nicer to
introduce support for other BCM590xx chips besides the BCM59056.
To do this, add a new struct type, bcm590xx_reg_data, to store
all of the necessary information. Drop the old IS_LDO, IS_GPLDO...
macros in favor of the "type" field in this struct. Adapt the
old bcm590xx_reg struct to the new types.
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250515-bcm59054-v9-6-14ba0ea2ea5b@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The BCM590xx PMUs have two I2C registers for reading the PMU ID
and revision. The revision is useful for subdevice drivers, since
different revisions may have slight differences in behavior (for
example - BCM59054 has different regulator configurations for
revision A0 and A1).
Check the PMU ID register and make sure it matches the DT compatible.
Fetch the digital and analog revision from the PMUREV register
so that it can be used in subdevice drivers.
Also add some known revision values to bcm590xx.h, for convenience
when writing subdevice drivers.
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Link: https://lore.kernel.org/r/20250515-bcm59054-v9-4-14ba0ea2ea5b@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
The BCM59054 is another chip from the BCM590xx line of PMUs, commonly
used on devices with the BCM21664/BCM23550 chipsets.
Prepare the BCM590xx driver for supporting other devices by adding the
PMUID register values for supported chip types and store them in the
MFD data struct as "pmu_id". (These will be checked against the actual
PMUID register values in a later commit.)
Then, add a DT compatible for the BCM59054, and provide the PMU ID as
OF match data.
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Stanislav Jakubek <stano.jakubek@gmail.com>
Link: https://lore.kernel.org/r/20250515-bcm59054-v9-3-14ba0ea2ea5b@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2025-05-21
1) Fix some missing kfree_skb in the error paths of espintcp.
From Sabrina Dubroca.
2) Fix a reference leak in espintcp.
From Sabrina Dubroca.
3) Fix UDP GRO handling for ESPINUDP.
From Tobias Brunner.
4) Fix ipcomp truesize computation on the receive path.
From Sabrina Dubroca.
5) Sanitize marks before policy/state insertation.
From Paul Chaignon.
* tag 'ipsec-2025-05-21' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
xfrm: Sanitize marks before insert
xfrm: ipcomp: fix truesize computation on receive
xfrm: Fix UDP GRO handling for some corner cases
espintcp: remove encap socket caching to avoid reference leak
espintcp: fix skb leaks
====================
Link: https://patch.msgid.link/20250521054348.4057269-1-steffen.klassert@secunet.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Some I2C ATRs can have other I2C ATRs as children. The I2C messages of
the child ATRs need to be forwarded as-is if the parent I2C ATR can
only do static mapping.
In the case of GMSL, the deserializer I2C ATR actually doesn't have I2C
address remapping hardware capabilities, but it is able to select which
GMSL link to talk to, allowing it to change the address of the
serializer.
The child ATRs need to have their alias pools defined in such a way to
prevent overlapping addresses between them, but there's no way around
this without orchestration between multiple ATR instances.
To allow for this use-case, add a flag that allows unmapped addresses
to be passed through, since they are already remapped by the child ATRs.
There's no case where an address that has not been remapped by the child
ATR will hit the parent ATR.
Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Romain Gantois <romain.gantois@bootlin.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
Some I2C ATRs do not support dynamic remapping, only static mapping
of direct children.
Mappings will only be added or removed as a result of devices being
added or removed from a child bus.
The ATR pool will have to be big enough to accommodate all devices
expected to be added to the child buses.
Add a new flag that prevents old mappings to be replaced or new mappings
to be created in the alias finding code paths. That mens adding a flags
parameter to i2c_atr_new() and an i2c_atr_flags enum.
Signed-off-by: Cosmin Tanislav <demonsingur@gmail.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Reviewed-by: Romain Gantois <romain.gantois@bootlin.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
|
|
When applying a recent commit to the <uapi/linux/perf_event.h>
header I noticed that we have accumulated quite a bit of
historic noise in this header, so do a bit of spring cleaning:
- Define bitfields in a vertically aligned fashion, like
perf_event_mmap_page::capabilities already does. This
makes it easier to see the distribution and sizing of
bits within a word, at a glance. The following is much
more readable:
__u64 cap_bit0 : 1,
cap_bit0_is_deprecated : 1,
cap_user_rdpmc : 1,
cap_user_time : 1,
cap_user_time_zero : 1,
cap_user_time_short : 1,
cap_____res : 58;
Than:
__u64 cap_bit0:1,
cap_bit0_is_deprecated:1,
cap_user_rdpmc:1,
cap_user_time:1,
cap_user_time_zero:1,
cap_user_time_short:1,
cap_____res:58;
So convert all bitfield definitions from the latter style to the
former style.
- Fix typos and grammar
- Fix capitalization
- Remove whitespace noise
- Harmonize the definitions of various generations and groups of
PERF_MEM_ ABI values.
- Vertically align all definitions and assignments to the same
column (48), as the first definition (enum perf_type_id),
throughout the entire header.
- And in general make the code and comments to be more in sync
with each other and to be more readable overall.
No change in functionality.
Copy the changes over to tools/include/uapi/linux/perf_event.h.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250521221529.2547099-1-irogers@google.com
|
|
AAUX data for PERF_SAMPLE_AUX appears last. PERF_SAMPLE_CGROUP is
missing from the comment.
This makes the <uapi/linux/perf_event.h> comment match that in the
perf_event_open man page.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: James Clark <james.clark@linaro.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-perf-users@vger.kernel.org
Link: https://lore.kernel.org/r/20250521221529.2547099-1-irogers@google.com
|
|
SPI and I2C into the tas2781_hda lib
Calibration data getting function for SPI and I2C HDA drivers are almost
same, which read the calibration data from UEFI. To put them into
tas2781_hda lib for code cleanup is more reasonable than to still keep
them in the codec driver. For tas2781 codec driver, there're two different
sources for calibrated data, one is from bin file, generated in factory
test, requested and read in codec driver side; the other is from user
space during device bootup.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20250522014347.1163-1-shenghao-ding@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Introduce new API, genphy_match_phy_device(), to provide a way to check
to match a PHY driver for a PHY device based on the info stored in the
PHY device struct.
The function generalize the logic used in phy_bus_match() to check the
PHY ID whether if C45 or C22 ID should be used for matching.
This is useful for custom .match_phy_device function that wants to use
the generic logic under some condition. (example a PHY is already setup
and provide the correct PHY ID)
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://patch.msgid.link/20250517201353.5137-5-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pass PHY driver pointer to .match_phy_device OP in addition to phydev.
Having access to the PHY driver struct might be useful to check the
PHY ID of the driver is being matched for in case the PHY ID scanned in
the phydev is not consistent.
A scenario for this is a PHY that change PHY ID after a firmware is
loaded, in such case, the PHY ID stored in PHY device struct is not
valid anymore and PHY will manually scan the ID in the match_phy_device
function.
Having the PHY driver info is also useful for those PHY driver that
implement multiple simple .match_phy_device OP to match specific MMD PHY
ID. With this extra info if the parsing logic is the same, the matching
function can be generalized by using the phy_id in the PHY driver
instead of hardcoding.
Rust wrapper callback is updated to align to the new match_phy_device
arguments.
Suggested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Benno Lossin <lossin@kernel.org> # for Rust
Reviewed-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Link: https://patch.msgid.link/20250517201353.5137-2-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that skb_copy_and_hash_datagram_iter() is no longer used, remove it.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://patch.msgid.link/20250519175012.36581-11-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Since skb_copy_and_hash_datagram_iter() is used only with CRC32C, the
crypto_ahash abstraction provides no value. Add
skb_copy_and_crc32c_datagram_iter() which just calls crc32c() directly.
This is faster and simpler. It also doesn't have the weird dependency
issue where skb_copy_and_hash_datagram_iter() depends on
CONFIG_CRYPTO_HASH=y without that being expressed explicitly in the
kconfig (presumably because it was too heavyweight for NET to select).
The new function is conditional on the hidden boolean symbol NET_CRC32C,
which selects CRC32. So it gets compiled only when something that
actually needs CRC32C packet checksums is enabled, it has no implicit
dependency, and it doesn't depend on the heavyweight crypto layer.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://patch.msgid.link/20250519175012.36581-9-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
crc32c_combine() and crc32c_shift() are no longer used (except by the
KUnit test that tests them), and their current implementation is very
slow. Remove them.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://patch.msgid.link/20250519175012.36581-8-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Now that the only remaining caller of __skb_checksum() is
skb_checksum(), fold __skb_checksum() into skb_checksum(). This makes
struct skb_checksum_ops unnecessary, so remove that too and simply do
the "regular" net checksum. It also makes the wrapper functions
csum_partial_ext() and csum_block_add_ext() unnecessary, so remove those
too and just use the underlying functions.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://patch.msgid.link/20250519175012.36581-7-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make sctp_compute_cksum() just use the new function skb_crc32c(),
instead of calling __skb_checksum() with a skb_checksum_ops struct that
does CRC32C. This is faster and simpler.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://patch.msgid.link/20250519175012.36581-6-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Add skb_crc32c(), which calculates the CRC32C of a sk_buff. It will
replace __skb_checksum(), which unnecessarily supports arbitrary
checksums. Compared to __skb_checksum(), skb_crc32c():
- Uses the correct type for CRC32C values (u32, not __wsum).
- Does not require the caller to provide a skb_checksum_ops struct.
- Is faster because it does not use indirect calls and does not use
the very slow crc32c_combine().
According to commit 2817a336d4d5 ("net: skb_checksum: allow custom
update/combine for walking skb") which added __skb_checksum(), the
original motivation for the abstraction layer was to avoid code
duplication for CRC32C and other checksums in the future. However:
- No additional checksums showed up after CRC32C. __skb_checksum()
is only used with the "regular" net checksum and CRC32C.
- Indirect calls are expensive. Commit 2544af0344ba ("net: avoid
indirect calls in L4 checksum calculation") worked around this
using the INDIRECT_CALL_1 macro. But that only avoided the indirect
call for the net checksum, and at the cost of an extra branch.
- The checksums use different types (__wsum and u32), causing casts
to be needed.
- It made the checksums of fragments be combined (rather than
chained) for both checksums, despite this being highly
counterproductive for CRC32C due to how slow crc32c_combine() is.
This can clearly be seen in commit 4c2f24549644 ("sctp: linearize
early if it's not GSO") which tried to work around this performance
bug. With a dedicated function for each checksum, we can instead
just use the proper strategy for each checksum.
As shown by the following tables, the new function skb_crc32c() is
faster than __skb_checksum(), with the improvement varying greatly from
5% to 2500% depending on the case. The largest improvements come from
fragmented packets, mainly due to eliminating the inefficient
crc32c_combine(). But linear packets are improved too, especially
shorter ones, mainly due to eliminating indirect calls. These
benchmarks were done on AMD Zen 5. On that CPU, Linux uses IBRS instead
of retpoline; an even greater improvement might be seen with retpoline:
Linear sk_buffs
Length in bytes __skb_checksum cycles skb_crc32c cycles
=============== ===================== =================
64 43 18
256 94 77
1420 204 161
16384 1735 1642
Nonlinear sk_buffs (even split between head and one fragment)
Length in bytes __skb_checksum cycles skb_crc32c cycles
=============== ===================== =================
64 579 22
256 829 77
1420 1506 194
16384 4365 1682
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Link: https://patch.msgid.link/20250519175012.36581-3-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
New SoC the RK3562 (4xA53, Mali-G52) with one evaluation board.
New boards:
- Cobra and PP1516 from Theobroma-Systems (build around the PX30)
- Radxa Rock 5B+ (rk3588)
- Rockchip RK3399 industrial eval board
New peripherals:
- GMAC + SDMMC/SDIO on rk3528
- SAI + HDMI-audio on rk3576
Interesting general updates:
- move rk3528 i2c + uart aliases as requested
- rk3568 PCIe3 MSI to use GIC ITS
- update deprecated dwmac reset properties on some px30 boards
- updates for cypress usb hubs on some Theobroma boards
Binding taken with Greg's blessing
https://lore.kernel.org/all/2025051550-polish-prude-ed56@gregkh/
* tag 'v6.16-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (35 commits)
arm64: dts: rockchip: Improve LED config for NanoPi R5S
arm64: dts: rockchip: add px30-pp1516 base dtsi and board variants
dt-bindings: arm: rockchip: add PX30-PP1516 boards from Theobroma Systems
arm64: dts: rockchip: add px30-cobra base dtsi and board variants
dt-bindings: arm: rockchip: add PX30-Cobra boards from Theobroma Systems
arm64: dts: rockchip: move reset to dedicated eth-phy node on ringneck
arm64: dts: rockchip: add basic mdio node to px30
arm64: dts: rockchip: disable unrouted USB controllers and PHY on RK3399 Puma with Haikou
arm64: dts: rockchip: disable unrouted USB controllers and PHY on RK3399 Puma
arm64: dts: rockchip: fix internal USB hub instability on RK3399 Puma
dt-bindings: usb: cypress,hx3: Add support for all variants
arm64: dts: rockchip: move rk3528 i2c+uart aliases to board files
arm64: dts: rockchip: drop wrong spdif clock from edp1 on rk3588
arm64: dts: rockchip: Add RK3562 evb2 devicetree
arm64: dts: rockchip: add core dtsi for RK3562 SoC
dt-bindings: arm: rockchip: Add rk3562 evb2 board
dt-bindings: soc: rockchip: Add rk3562 syscon compatibles
dt-bindings: rockchip: pmu: Add rk3562 compatible
arm64: dts: rockchip: Enable Ethernet controller on Radxa E20C
arm64: dts: rockchip: Add GMAC nodes for RK3528
...
Link: https://lore.kernel.org/r/3998939.iIbC2pHGDl@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt
STM32 DT for v6.16, round 1
Highlights:
----------
- MCU:
- Add low power timer on STM32F746
- Add STM32H747 High end MCU support. It embeds:
- dual-core (Cortex-M7 + Cortex-M4)
- up to 2 Mbytes flash
- 1 Mbyte of internal RAM
- Add STM32H747i-disco board support. Detailed information can be
found at:
https://www.st.com/en/evaluation-tools/stm32h747i-disco.html
- MPU:
- STM32MP13:
- Add VREFINT calibration support based on ADC.
- STMP32MP15:
- Add new Ultratronik Fly board support:
- based on STM32MP157C SoC
- 1GB of DDR3
- Several connections are available on this boards:
2*USB2.0, 1*USB2.0 MiniUSB, Debug UART, 1*UART, 1*USART,
SDcard, RJ45, ...
- STM32MP25:
- Add OCTOSPI support on STM32MP25 SoCs
- Add SPI NOR flash support on STM32MP257F-EV1 connected to OSPI1
- Add Low power timer TIMER (LPTIM) on STM32MP25 SoCs and use
LPTIM3 as low power broadcast timer on STM32MP257F-EV1.
* tag 'stm32-dt-for-v6.16-1' of https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (22 commits)
ARM: dts: stm32: add initial support for stm32mp157-ultra-fly-sbc board
MAINTAINERS: Add entry for ULTRATRONIK BOARD SUPPORT
dt-bindings: arm: stm32: Document Ultratronik's Fly board DT binding
dt-bindings: vendor-prefixes: Add Ultratronik
arm64: dts: st: use lptimer3 as tick broadcast source on stm32mp257f-ev1
arm64: dts: st: add low-power timer nodes on stm32mp251
arm64: defconfig: enable STM32 LP timer clockevent driver
arm64: dts: st: Add SPI NOR flash support on stm32mp257f-ev1 board
arm64: dts: st: Add ospi port1 pinctrl entries in stm32mp25-pinctrl.dtsi
arm64: dts: st: Add OMM node on stm32mp251
ARM: dts: stm32: support STM32h747i-disco board
ARM: dts: stm32: add an extra pin map for USART1 on stm32h743
ARM: dts: stm32: add pin map for UART8 controller on stm32h743
ARM: dts: stm32: add uart8 node for stm32h743 MCU
dt-bindings: clock: stm32h7: rename USART{7,8}_CK to UART{7,8}_CK
ARM: stm32: add a new SoC - STM32H747
dt-bindings: arm: stm32: add compatible for stm32h747i-disco board
ARM: dts: stm32h7-pinctrl: add _a suffix to u[s]art_pins phandles
ARM: dts: st: stm32: Align wifi node name with bindings
ARM: dts: stm32: add low power timer on STM32F746
...
Link: https://lore.kernel.org/r/2f101efb-6d58-48d8-983a-57e30a34827c@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
into soc/dt
RISC-V SpacemiT DT changes for 6.16
- Add clock driver, fix for pinctrl/uart
- Add gpio support, enable LED heartbeat
* tag 'spacemit-dt-for-6.16-1' of https://github.com/spacemit-com/linux:
riscv: dts: spacemit: add gpio LED for system heartbeat
riscv: dts: spacemit: add gpio support for K1 SoC
riscv: dts: spacemit: Acquire clocks for UART
riscv: dts: spacemit: Acquire clocks for pinctrl
riscv: dts: spacemit: Add clock tree for SpacemiT K1
dt-bindings: clock: spacemit: Add spacemit,k1-pll
dt-bindings: soc: spacemit: Add spacemit,k1-syscon
Link: https://lore.kernel.org/r/20250514044841-GYA524674@gentoo
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/drivers
Samsung SoC drivers for v6.16, part two
Add CPU hotplug support on Google GS101 by toggling respective bits in
secondary PMU intr block (Power Management Unit (PMU) Interrupt
Generation) from the main PMU driver.
* tag 'samsung-drivers-6.16-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
soc: samsung: exynos-pmu: enable CPU hotplug support for gs101
MAINTAINERS: Add google,gs101-pmu-intr-gen.yaml binding file
dt-bindings: soc: samsung: exynos-pmu: gs101: add google,pmu-intr-gen phandle
dt-bindings: soc: google: Add gs101-pmu-intr-gen binding documentation
Link: https://lore.kernel.org/r/20250516082037.7248-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Kory is reporting build issues after recent additions to YNL
if the system headers are old.
Link: https://lore.kernel.org/20250519164949.597d6e92@kmaincent-XPS-13-7390
Reported-by: Kory Maincent <kory.maincent@bootlin.com>
Fixes: 0939a418b3b0 ("tools: ynl: submsg: reverse parse / error reporting")
Tested-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20250520161916.413298-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Convert pci_msi_enable and pci_msi_enabled() to use bool type for clarity.
No functional changes, only code cleanup.
Signed-off-by: Hans Zhang <hans.zhang@cixtech.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20250516165223.125083-2-18255117159@163.com
|
|
I've used several email addresses and a previous name to contribute.
Consolidate all of these to my primary email and update my name.
Link: https://lkml.kernel.org/r/20250517223237.15647-2-casey.connolly@linaro.org
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Crash kernel will retrieve the dm crypt keys based on the dmcryptkeys
command line parameter. When user space writes the key description to
/sys/kernel/config/crash_dm_crypt_key/restore, the crash kernel will save
the encryption keys to the user keyring. Then user space e.g.
cryptsetup's --volume-key-keyring API can use it to unlock the encrypted
device.
Link: https://lkml.kernel.org/r/20250502011246.99238-6-coxu@redhat.com
Signed-off-by: Coiby Xu <coxu@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: "Daniel P. Berrange" <berrange@redhat.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Jan Pazdziora <jpazdziora@redhat.com>
Cc: Liu Pingfan <kernelfans@gmail.com>
Cc: Milan Broz <gmazyland@gmail.com>
Cc: Ondrej Kozina <okozina@redhat.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
When the kdump kernel image and initrd are loaded, the dm crypts keys will
be read from keyring and then stored in kdump reserved memory.
Assume a key won't exceed 256 bytes thus MAX_KEY_SIZE=256 according to
"cryptsetup benchmark".
Link: https://lkml.kernel.org/r/20250502011246.99238-4-coxu@redhat.com
Signed-off-by: Coiby Xu <coxu@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: "Daniel P. Berrange" <berrange@redhat.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Jan Pazdziora <jpazdziora@redhat.com>
Cc: Liu Pingfan <kernelfans@gmail.com>
Cc: Milan Broz <gmazyland@gmail.com>
Cc: Ondrej Kozina <okozina@redhat.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "Support kdump with LUKS encryption by reusing LUKS volume
keys", v9.
LUKS is the standard for Linux disk encryption, widely adopted by users,
and in some cases, such as Confidential VMs, it is a requirement. With
kdump enabled, when the first kernel crashes, the system can boot into the
kdump/crash kernel to dump the memory image (i.e., /proc/vmcore) to a
specified target. However, there are two challenges when dumping vmcore
to a LUKS-encrypted device:
- Kdump kernel may not be able to decrypt the LUKS partition. For some
machines, a system administrator may not have a chance to enter the
password to decrypt the device in kdump initramfs after the 1st kernel
crashes; For cloud confidential VMs, depending on the policy the
kdump kernel may not be able to unseal the keys with TPM and the
console virtual keyboard is untrusted.
- LUKS2 by default use the memory-hard Argon2 key derivation function
which is quite memory-consuming compared to the limited memory reserved
for kdump. Take Fedora example, by default, only 256M is reserved for
systems having memory between 4G-64G. With LUKS enabled, ~1300M needs
to be reserved for kdump. Note if the memory reserved for kdump can't
be used by 1st kernel i.e. an user sees ~1300M memory missing in the
1st kernel.
Besides users (at least for Fedora) usually expect kdump to work out of
the box i.e. no manual password input or custom crashkernel value is
needed. And it doesn't make sense to derivate the keys again in kdump
kernel which seems to be redundant work.
This patchset addresses the above issues by making the LUKS volume keys
persistent for kdump kernel with the help of cryptsetup's new APIs
(--link-vk-to-keyring/--volume-key-keyring). Here is the life cycle of
the kdump copies of LUKS volume keys,
1. After the 1st kernel loads the initramfs during boot, systemd
use an user-input passphrase to de-crypt the LUKS volume keys
or TPM-sealed key and then save the volume keys to specified keyring
(using the --link-vk-to-keyring API) and the key will expire within
specified time.
2. A user space tool (kdump initramfs loader like kdump-utils) create
key items inside /sys/kernel/config/crash_dm_crypt_keys to inform
the 1st kernel which keys are needed.
3. When the kdump initramfs is loaded by the kexec_file_load
syscall, the 1st kernel will iterate created key items, save the
keys to kdump reserved memory.
4. When the 1st kernel crashes and the kdump initramfs is booted, the
kdump initramfs asks the kdump kernel to create a user key using the
key stored in kdump reserved memory by writing yes to
/sys/kernel/crash_dm_crypt_keys/restore. Then the LUKS encrypted
device is unlocked with libcryptsetup's --volume-key-keyring API.
5. The system gets rebooted to the 1st kernel after dumping vmcore to
the LUKS encrypted device is finished
After libcryptsetup saving the LUKS volume keys to specified keyring,
whoever takes this should be responsible for the safety of these copies of
keys. The keys will be saved in the memory area exclusively reserved for
kdump where even the 1st kernel has no direct access. And further more,
two additional protections are added,
- save the copy randomly in kdump reserved memory as suggested by Jan
- clear the _PAGE_PRESENT flag of the page that stores the copy as
suggested by Pingfan
This patchset only supports x86. There will be patches to support other
architectures once this patch set gets merged.
This patch (of 9):
Currently, kexec_buf is placed in order which means for the same machine,
the info in the kexec_buf is always located at the same position each time
the machine is booted. This may cause a risk for sensitive information
like LUKS volume key. Now struct kexec_buf has a new field random which
indicates it's supposed to be placed in a random position.
Note this feature is enabled only when CONFIG_CRASH_DUMP is enabled. So
it only takes effect for kdump and won't impact kexec reboot.
Link: https://lkml.kernel.org/r/20250502011246.99238-1-coxu@redhat.com
Link: https://lkml.kernel.org/r/20250502011246.99238-2-coxu@redhat.com
Signed-off-by: Coiby Xu <coxu@redhat.com>
Suggested-by: Jan Pazdziora <jpazdziora@redhat.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: "Daniel P. Berrange" <berrange@redhat.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Liu Pingfan <kernelfans@gmail.com>
Cc: Milan Broz <gmazyland@gmail.com>
Cc: Ondrej Kozina <okozina@redhat.com>
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers
Qualcomm driver updates for v6.16
Allow list QSEECOM for EFI variable services on on the Asus Zenbook A14,
and block list TZMEM on the SM7150 platform to avoid issues with rmtfs.
Extend the last-level cache (llcc) driver to support version 6 of the
hardware and enable SM8750 support.
Also add socinfo for the SM8750 platform.
Re-enable UCSI support on SC8280XP, now that the reported crash has been
dealt with, and filter the altmode notifications to avoid spurious
hotplug events being propagated to user space.
Add SM7150 support to pd-mapper.
* tag 'qcom-drivers-for-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: llcc-qcom: Add support for SM8750
soc: qcom: llcc-qcom: Add support for LLCC V6
dt-bindings: cache: qcom,llcc: Document SM8750 LLCC block
soc: qcom: socinfo: add SM8750 SoC ID
dt-bindings: arm: qcom,ids: add SoC ID for SM8750
dt-bindings: soc: qcom: qcom,rpm: add missing clock/-names properties
dt-bindings: soc: qcom,rpm: add missing clock-controller node
soc: qcom: smem: Update max processor count
firmware: qcom: tzmem: disable sm7150 platform
soc: qcom: pd-mapper: Add support for SM7150
soc: qcom: pmic_glink_altmode: fix spurious DP hotplug events
soc: qcom: smp2p: Fix fallback to qcom,ipc parse
soc: qcom: pmic_glink: enable UCSI on sc8280xp
firmware: qcom: scm: Allow QSEECOM on Asus Zenbook A14
dt-bindings: soc: qcom,rpmh-rsc: Limit power-domains requirement
Link: https://lore.kernel.org/r/20250513215656.44448-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
soc/drivers
Reset controller updates for v6.16
* Add T-HEAD TH1520 and Renesas RZ/V2H(P) USB2PHY reset controller
drivers.
* Add devm_reset_control_array_get_exclusive_released() variant to allow
using the acquire/release hand-off mechanism for exclusive reset
controls bundled into reset control arrays.
* Add Sophgo SG2044 reset controller to device tree bindings.
* tag 'reset-for-v6.16' of git://git.pengutronix.de/pza/linux:
dt-bindings: reset: sophgo: Add SG2044 bindings.
MAINTAINERS: Add entry for Renesas RZ/V2H(P) USB2PHY Port Reset driver
reset: Add USB2PHY port reset driver for Renesas RZ/V2H(P)
dt-bindings: reset: Document RZ/V2H(P) USB2PHY reset
reset: Add devm_reset_control_array_get_exclusive_released()
reset: thead: Add TH1520 reset controller driver
dt-bindings: reset: Add T-HEAD TH1520 SoC Reset Controller
Link: https://lore.kernel.org/r/20250513092516.3331585-1-p.zabel@pengutronix.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:
Add helper functions to add DAPM widgets, routes, ALSA controls,
and DAI drivers, these will be used to create SDCA function device
drivers.
This series should provide most of the core functionality needed to
get a device registered and have a working DAPM graph within the
device. There are some features that still need additional work, these
are marked with FIXMEs in the code. The two main things are SDCA
Clock Muxes (not used in our devices and needs some ASoC core work),
and better support for more complex SDCA volume control definitions
(our parts have fairly simple volumes, and SDCA has a large amount of
flexibility in how the volume control is specified).
The next steps in the process are to add helpers for the DAI ops
themselves, some IRQ handling, and firmware download. And finally we
should be able to actually add the SDCA class driver itself.
|
|
On machines with multiple memory nodes, interleaving page allocations
across nodes allows for better utilization of each node's bandwidth.
Previous work by Gregory Price [1] introduced weighted interleave, which
allowed for pages to be allocated across nodes according to user-set
ratios.
Ideally, these weights should be proportional to their bandwidth, so that
under bandwidth pressure, each node uses its maximal efficient bandwidth
and prevents latency from increasing exponentially.
Previously, weighted interleave's default weights were just 1s -- which
would be equivalent to the (unweighted) interleave mempolicy, which goes
through the nodes in a round-robin fashion, ignoring bandwidth
information.
This patch has two main goals: First, it makes weighted interleave easier
to use for users who wish to relieve bandwidth pressure when using nodes
with varying bandwidth (CXL). By providing a set of "real" default
weights that just work out of the box, users who might not have the
capability (or wish to) perform experimentation to find the most optimal
weights for their system can still take advantage of bandwidth-informed
weighted interleave.
Second, it allows for weighted interleave to dynamically adjust to
hotplugged memory with new bandwidth information. Instead of manually
updating node weights every time new bandwidth information is reported or
taken off, weighted interleave adjusts and provides a new set of default
weights for weighted interleave to use when there is a change in bandwidth
information.
To meet these goals, this patch introduces an auto-configuration mode for
the interleave weights that provides a reasonable set of default weights,
calculated using bandwidth data reported by the system. In auto mode,
weights are dynamically adjusted based on whatever the current bandwidth
information reports (and responds to hotplug events).
This patch still supports users manually writing weights into the nodeN
sysfs interface by entering into manual mode. When a user enters manual
mode, the system stops dynamically updating any of the node weights, even
during hotplug events that shift the optimal weight distribution.
A new sysfs interface "auto" is introduced, which allows users to switch
between the auto (writing 1 or Y) and manual (writing 0 or N) modes. The
system also automatically enters manual mode when a nodeN interface is
manually written to.
There is one functional change that this patch makes to the existing
weighted_interleave ABI: previously, writing 0 directly to a nodeN
interface was said to reset the weight to the system default. Before this
patch, the default for all weights were 1, which meant that writing 0 and
1 were functionally equivalent. With this patch, writing 0 is invalid.
Link: https://lkml.kernel.org/r/20250520141236.2987309-1-joshua.hahnjy@gmail.com
[joshua.hahnjy@gmail.com: wordsmithing changes, simplification, fixes]
Link: https://lkml.kernel.org/r/20250511025840.2410154-1-joshua.hahnjy@gmail.com
[joshua.hahnjy@gmail.com: remove auto_kobj_attr field from struct sysfs_wi_group]
Link: https://lkml.kernel.org/r/20250512142511.3959833-1-joshua.hahnjy@gmail.com
https://lore.kernel.org/linux-mm/20240202170238.90004-1-gregory.price@memverge.com/ [1]
Link: https://lkml.kernel.org/r/20250505182328.4148265-1-joshua.hahnjy@gmail.com
Co-developed-by: Gregory Price <gourry@gourry.net>
Signed-off-by: Gregory Price <gourry@gourry.net>
Signed-off-by: Joshua Hahn <joshua.hahnjy@gmail.com>
Suggested-by: Yunjeong Mun <yunjeong.mun@sk.com>
Suggested-by: Oscar Salvador <osalvador@suse.de>
Suggested-by: Ying Huang <ying.huang@linux.alibaba.com>
Suggested-by: Harry Yoo <harry.yoo@oracle.com>
Reviewed-by: Harry Yoo <harry.yoo@oracle.com>
Reviewed-by: Huang Ying <ying.huang@linux.alibaba.com>
Reviewed-by: Honggyu Kim <honggyu.kim@sk.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Joanthan Cameron <Jonathan.Cameron@huawei.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
* Rename constants to their standard PE names:
- MZ_MAGIC -> IMAGE_DOS_SIGNATURE
- PE_MAGIC -> IMAGE_NT_SIGNATURE
- PE_OPT_MAGIC_PE32_ROM -> IMAGE_ROM_OPTIONAL_HDR_MAGIC
- PE_OPT_MAGIC_PE32 -> IMAGE_NT_OPTIONAL_HDR32_MAGIC
- PE_OPT_MAGIC_PE32PLUS -> IMAGE_NT_OPTIONAL_HDR64_MAGIC
- IMAGE_DLL_CHARACTERISTICS_NX_COMPAT -> IMAGE_DLLCHARACTERISTICS_NX_COMPAT
* Import constants and their description from readpe and file projects
which contains current up-to-date information:
- IMAGE_FILE_MACHINE_*
- IMAGE_FILE_*
- IMAGE_SUBSYSTEM_*
- IMAGE_DLLCHARACTERISTICS_*
- IMAGE_DLLCHARACTERISTICS_EX_*
- IMAGE_DEBUG_TYPE_*
* Add missing IMAGE_SCN_* constants and update their incorrect description
* Fix incorrect value of IMAGE_SCN_MEM_PURGEABLE constant
* Add description for win32_version and loader_flags PE fields
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Use separate link type id for unicast and broadcast ISO connections.
These connection types are handled with separate HCI commands, socket
API is different, and hci_conn has union fields that are different in
the two cases, so they shall not be mixed up.
Currently in most places it is attempted to distinguish ucast by
bacmp(&c->dst, BDADDR_ANY) but it is wrong as dst is set for bcast sink
hci_conn in iso_conn_ready(). Additionally checking sync_handle might be
OK, but depends on details of bcast conn configuration flow.
To avoid complicating it, use separate link types.
Fixes: f764a6c2c1e4 ("Bluetooth: ISO: Add broadcast support")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Bluetooth needs some way for user to get supported so_timestamping flags
for the different socket types.
Use SIOCETHTOOL API for this purpose. As hci_dev is not associated with
struct net_device, the existing implementation can't be reused, so we
add a small one here.
Add support (only) for ETHTOOL_GET_TS_INFO command. The API differs
slightly from netdev in that the result depends also on socket type.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Although commit 75ddcd5ad40e ("Bluetooth: btusb: Configure altsetting
for HCI_USER_CHANNEL") has enabled the HCI_USER_CHANNEL user to send out
SCO data through USB Bluetooth chips, it's observed that with the patch
HFP is flaky on most of the existing USB Bluetooth controllers: Intel
chips sometimes send out no packet for Transparent codec; MTK chips may
generate SCO data with a wrong handle for CVSD codec; RTK could split
the data with a wrong packet size for Transparent codec; ... etc.
To address the issue above one needs to reset the altsetting back to
zero when there is no active SCO connection, which is the same as the
BlueZ behavior, and another benefit is the bus doesn't need to reserve
bandwidth when no SCO connection.
This patch adds the infrastructure that allow the user space program to
talk to Bluetooth drivers directly:
- Define the new packet type HCI_DRV_PKT which is specifically used for
communication between the user space program and the Bluetooth drviers
- hci_send_frame intercepts the packets and invokes drivers' HCI Drv
callbacks (so far only defined for btusb)
- 2 kinds of events to user space: Command Status and Command Complete,
the former simply returns the status while the later may contain
additional response data.
Cc: chromeos-bluetooth-upstreaming@chromium.org
Fixes: b16b327edb4d ("Bluetooth: btusb: add sysfs attribute to control USB alt setting")
Signed-off-by: Hsin-chen Chuang <chharry@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
|
|
Includes the following corrections -
- Changed Measurment -> Measurement
- Changed clode -> close
- Gyro -> gyro
Signed-off-by: Chelsy Ratnawat <chelsyratnawat2001@gmail.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250507055745.4069933-1-chelsyratnawat2001@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add new macros to help with the common case of declaring a buffer that
is safe to use with iio_push_to_buffers_with_ts(). This is not trivial
to do correctly because of the alignment requirements of the timestamp.
This will make it easier for both authors and reviewers.
To avoid double __align() attributes in cases where we also need DMA
alignment, add a 2nd variant IIO_DECLARE_DMA_BUFFER_WITH_TS().
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250507-iio-introduce-iio_declare_buffer_with_ts-v6-2-4aee1b9f1b89@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
Add a condition to ensure that IIO_DMA_MINALIGN is at least 8 bytes.
On some 32-bit architectures, IIO_DMA_MINALIGN is 4. In many cases,
drivers are using this alignment for buffers that include a 64-bit
timestamp that is used with iio_push_to_buffers_with_ts(), which expects
the timestamp to be aligned to 8 bytes. To handle this, we can just make
IIO_DMA_MINALIGN at least 8 bytes.
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250507-iio-introduce-iio_declare_buffer_with_ts-v6-1-4aee1b9f1b89@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
sensor_hub_remove_callback()
Fixed a typo in "registered" and improved grammar for better readability
and consistency with kernel-doc standards. No functional changes.
Signed-off-by: Chelsy Ratnawat <chelsyratnawat2001@gmail.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250502003655.1943000-1-chelsyratnawat2001@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
argument.
Check that data_total_len argument against iio_dev->scan_bytes.
The size needs to be at least as big as the scan. It can be larger,
which is typical if only part of fixed sized storage is used due to
a subset of channels being enabled.
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250413103443.2420727-6-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
- Provide user register access over IOCTL.
Both register read and write are supported.
- APML interface does not provide a synchronization method. By defining,
a register access path, we use APML modules and library for
all APML transactions. Without having to use external tools such as
i2c-tools, which may cause race conditions.
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Signed-off-by: Akshay Gupta <akshay.gupta@amd.com>
Link: https://lore.kernel.org/r/20250428063034.2145566-10-akshay.gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
- AMD provides custom protocol to read Machine Check Architecture(MCA)
registers over sideband. The information is accessed for range of
MCA registers by passing register address and thread ID to the protocol.
MCA register read command using the register address to access
Core::X86::Msr::MCG_CAP which determines the number of MCA banks.
Access is read-only
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Signed-off-by: Akshay Gupta <akshay.gupta@amd.com>
Link: https://lore.kernel.org/r/20250428063034.2145566-9-akshay.gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
- AMD provides custom protocol to read Processor feature
capabilities and configuration information through side band.
The information is accessed by providing CPUID Function,
extended function and thread ID to the protocol.
Undefined function returns 0.
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Signed-off-by: Akshay Gupta <akshay.gupta@amd.com>
Link: https://lore.kernel.org/r/20250428063034.2145566-8-akshay.gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The present sbrmi module only support reporting power via hwmon.
However, AMD data center range of processors support various
system management functionality using custom protocols defined in
Advanced Platform Management Link (APML) specification.
Register a miscdevice, which creates a device /dev/sbrmiX with an IOCTL
interface for the user space to invoke the APML Mailbox protocol, which
is already defined in sbrmi_mailbox_xfer().
The APML protocols depend on a set of RMI registers. Having an IOCTL
as a single entry point will help in providing synchronization among
these protocols as multiple transactions on RMI register set may
create race condition.
Support for other protocols will be added in subsequent patches.
APML mailbox protocol returns additional error codes written by
SMU firmware in the out-bound register 0x37. These errors include,
invalid core, message not supported over platform and
others. This additional error codes can be used to provide more
details to user space.
Open-sourced and widely used https://github.com/amd/esmi_oob_library
will continue to provide user-space programmable API.
Reviewed-by: Naveen Krishna Chatradhi <naveenkrishna.chatradhi@amd.com>
Signed-off-by: Akshay Gupta <akshay.gupta@amd.com>
Link: https://lore.kernel.org/r/20250428063034.2145566-7-akshay.gupta@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
David Howells <dhowells@redhat.com> says:
Here are some miscellaneous fixes and changes for netfslib, if you could
pull them:
(1) Fix an oops in write-retry due to mis-resetting the I/O iterator.
(2) Fix the recording of transferred bytes for short DIO reads.
(3) Fix a request's work item to not require a reference, thereby avoiding
the need to get rid of it in BH/IRQ context.
(4) Fix waiting and waking to be consistent about the waitqueue used.
* patches from https://lore.kernel.org/20250519090707.2848510-1-dhowells@redhat.com:
netfs: Fix wait/wake to be consistent about the waitqueue used
netfs: Fix the request's work item to not require a ref
netfs: Fix setting of transferred bytes with short DIO reads
netfs: Fix oops in write-retry from mis-resetting the subreq iterator
Link: https://lore.kernel.org/20250519090707.2848510-1-dhowells@redhat.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When the netfs_io_request struct's work item is queued, it must be supplied
with a ref to the work item struct to prevent it being deallocated whilst
on the queue or whilst it is being processed. This is tricky to manage as
we have to get a ref before we try and queue it and then we may find it's
already queued and is thus already holding a ref - in which case we have to
try and get rid of the ref again.
The problem comes if we're in BH or IRQ context and need to drop the ref:
if netfs_put_request() reduces the count to 0, we have to do the cleanup -
but the cleanup may need to wait.
Fix this by adding a new work item to the request, ->cleanup_work, and
dispatching that when the refcount hits zero. That can then synchronously
cancel any outstanding work on the main work item before doing the cleanup.
Adding a new work item also deals with another problem upstream where it's
sometimes changing the work func in the put function and requeuing it -
which has occasionally in the past caused the cleanup to happen
incorrectly.
As a bonus, this allows us to get rid of the 'was_async' parameter from a
bunch of functions. This indicated whether the put function might not be
permitted to sleep.
Fixes: 3d3c95046742 ("netfs: Provide readahead and readpage netfs helpers")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/20250519090707.2848510-4-dhowells@redhat.com
cc: Paulo Alcantara <pc@manguebit.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: Steve French <stfrench@microsoft.com>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
A netfslib request comprises an ordered stream of subrequests that, when
doing an unbuffered/DIO read, are contiguous. The subrequests may be
performed in parallel, but may not be fully completed.
For instance, if we try and make a 256KiB DIO read from a 3-byte file with
a 64KiB rsize and 256KiB bsize, netfslib will attempt to make a read of
256KiB, broken up into four 64KiB subreads, with the expectation that the
first will be short and the subsequent three be completely devoid - but we
do all four on the basis that the file may have been changed by a third
party.
The read-collection code, however, walks through all the subreqs and
advances the notion of how much data has been read in the stream to the
start of each subreq plus its amount transferred (which are 3, 0, 0, 0 for
the example above) - which gives an amount apparently read of 3*64KiB -
which is incorrect.
Fix the collection code to cut short the calculation of the transferred
amount with the first short subrequest in an unbuffered read; everything
beyond that must be ignored as there's a hole that cannot be filled. This
applies both to shortness due to hitting the EOF and shortness due to an
error.
This is achieved by setting a flag on the request when we collect the first
short subrequest (collection is done in ascending order).
This can be tested by mounting a cifs volume with rsize=65536,bsize=262144
and doing a 256k DIO read of a very small file (e.g. 3 bytes). read()
should return 3, not >3.
This problem came in when netfs_read_collection() set rreq->transferred to
stream->transferred, even for DIO. Prior to that, netfs_rreq_assess_dio()
just went over the list and added up the subreqs till it met a short one -
but now the subreqs are discarded earlier.
Fixes: e2d46f2ec332 ("netfs: Change the read result collector to only use one work item")
Reported-by: Nicolas Baranger <nicolas.baranger@3xo.fr>
Closes: https://lore.kernel.org/all/10bec2430ed4df68bde10ed95295d093@3xo.fr/
Signed-off-by: "Paulo Alcantara (Red Hat)" <pc@manguebit.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/20250519090707.2848510-3-dhowells@redhat.com
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
