| Age | Commit message (Collapse) | Author |
|---|
|
We need double-pixel mode (pixel repetition) for interlace modes. This
patch adds the necessary support to DISPC to output double-pixel mode.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
OMAP4+ DSS has WBUNCOMPLETEERROR irq, which was not defined in the irq
list. Add the define.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
All devices using tpd12s015 driver are doing DT boot. No need of further
supporting the platform data. This patch removes support for platform
data.
Signed-off-by: Manisha Agrawal <manisha.agrawal@ti.com>
[tomi.valkeinen@ti.com: minor adjustments]
Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
|
|
Let's add stubs for the case where the Kernel gets compiled
without MEDIA_CONTROLLER.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
When the Media controller framework was merged, it was decided not to add
pipeline power management code for it was not seen generic. As a result, a
number of drivers have copied the same piece of code, with same bugfixes
done to them at different points of time (or not at all).
Add these functions to V4L2. Their use is optional for drivers.
[mchehab@osg.samsung.com: Fix merge conflicts]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Re-create the graph walk object as needed in order to have one large enough
available for all entities in the graph.
This enumeration is used for pipeline power management in the future.
[mchehab@osg.samsung.com: fix documentation bug:
" warning: bad line: graph_mutex"]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
.//include/media/v4l2-mc.h:138: warning: No description found for parameter 'vdev'
.//include/media/v4l2-mc.h:152: warning: No description found for parameter 'vdev'
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
While controllers are being enabled and disabled in
cgroup_subtree_control_write(), the original subsystem masks are
stashed in local variables so that they can be restored if the
operation fails in the middle.
This patch adds dedicated fields to struct cgroup to be used instead
of the local variables and implements functions to stash the current
values, propagate the changes and restore them recursively. Combined
with the previous changes, this makes subsystem management operations
fully recursive and modularlized. This will be used to expand cgroup
core functionalities.
While at it, remove now unused @css_enable and @css_disable from
cgroup_subtree_control_write().
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Zefan Li <lizefan@huawei.com>
|
|
Currently, whether a css (cgroup_subsys_state) has its interface files
created is not tracked and assumed to change together with the owning
cgroup's lifecycle. cgroup directory and interface creation is being
separated out from internal object creation to help refactoring and
eventually allow cgroups which are not visible through cgroupfs.
This patch adds CSS_VISIBLE to track whether a css has its interface
files created and perform management operations only when necessary
which helps decoupling interface file handling from internal object
lifecycle. After this patch, all css interface file management
functions can be called regardless of the current state and will
achieve the expected result.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Zefan Li <lizefan@huawei.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into HEAD
The highlights are:
* Enable VFIO device on PowerPC, from David Gibson
* Optimizations to speed up IPIs between vcpus in HV KVM,
from Suresh Warrier (who is also Suresh E. Warrier)
* In-kernel handling of IOMMU hypercalls, and support for dynamic DMA
windows (DDW), from Alexey Kardashevskiy.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
WARN_ON is used by this header file, but none of its direct includes
include asm/bug.h by way of linux/bug.h yet.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
With next generation power processor, we are having a new mmu model
[1] that require us to maintain a different linux page table format.
Inorder to support both current and future ppc64 systems with a single
kernel we need to make sure kernel can select between different page
table format at runtime. With the new MMU (radix MMU) added, we will
have two different pmd hugepage size 16MB for hash model and 2MB for
Radix model. Hence make HPAGE_PMD related values as a variable.
Actual conversion of HPAGE_PMD to a variable for ppc64 happens in a
followup patch.
[1] http://ibm.biz/power-isa3 (Needs registration).
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
|
|
Revert commits:
a6e707ddbdf1: KVM: arm/arm64: timer: Switch to CLOCK_MONOTONIC_RAW
9006a01829a5: hrtimer: Catch illegal clockids
9c808765e88e: hrtimer: Add support for CLOCK_MONOTONIC_RAW
Marc found out, that there are fundamental issues with that patch series
because __hrtimer_get_next_event() and hrtimer_forward() need support for
CLOCK_MONOTONIC_RAW. Nothing which is easily fixed, so revert the whole lot.
Reported-by: Marc Zyngier <marc.zyngier@arm.com>
Link: http://lkml.kernel.org/r/56D6CEF0.8060607@arm.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
|
Add support for Intel R200 depth camera in uvc driver.
This includes adding new uvc GUIDs for the new pixel formats,
adding new V4L pixel format definition to user api headers,
and updating the uvc driver GUID-to-4cc tables with the new formats.
Tested-by: Greenberg, Aviv D <aviv.d.greenberg@intel.com>
Signed-off-by: Aviv Greenberg <aviv.d.greenberg@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
As we want au0828 to use the core function to create the MC
graphs, use enum demod_pad_index instead of
enum au8522_media_pads.
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
The device initialization completes only after calling
input_register_device(). However, rc_open() can be called while
the device is being registered by the input/evdev core. So, we
can't expect that rc_dev->initialized to be true.
Change the logic to don't require initialized == true at rc_open
and change the type of initialized to be atomic.
this way, we can check for it earlier where it is really needed,
without needing to lock the mutex just for testing it.
Tested with nuvoton_cir driver on a NUC5i7RYB with CIR integrated on it.
Reported-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Make the base offset hexadecimal to simplify debugging since the base
addresses are hex too.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
We need to import the changes at media.h, as we have a
followup patch that depends on it.
* v4l_for_linus:
[media] media.h: use hex values for range offsets, move connectors base up.
[media] adv7604: fix tx 5v detect regression
|
|
Make the base offset hexadecimal to simplify debugging since the base
addresses are hex too.
The offsets for connectors is also changed to start after the 'reserved'
range 0x10000-0x2ffff.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
Another representative use case of time sync and the correlated
clocksource (in addition to PTP noted above) is PTP synchronized
audio.
In a streaming application, as an example, samples will be sent and/or
received by multiple devices with a presentation time that is in terms
of the PTP master clock. Synchronizing the audio output on these
devices requires correlating the audio clock with the PTP master
clock. The more precise this correlation is, the better the audio
quality (i.e. out of sync audio sounds bad).
From an application standpoint, to correlate the PTP master clock with
the audio device clock, the system clock is used as a intermediate
timebase. The transforms such an application would perform are:
System Clock <-> Audio clock
System Clock <-> Network Device Clock [<-> PTP Master Clock]
Modern Intel platforms can perform a more accurate cross timestamp in
hardware (ART,audio device clock). The audio driver requires
ART->system time transforms -- the same as required for the network
driver. These platforms offload audio processing (including
cross-timestamps) to a DSP which to ensure uninterrupted audio
processing, communicates and response to the host only once every
millsecond. As a result is takes up to a millisecond for the DSP to
receive a request, the request is processed by the DSP, the audio
output hardware is polled for completion, the result is copied into
shared memory, and the host is notified. All of these operation occur
on a millisecond cadence. This transaction requires about 2 ms, but
under heavier workloads it may take up to 4 ms.
Adding a history allows these slow devices the option of providing an
ART value outside of the current interval. In this case, the callback
provided is an accessor function for the previously obtained counter
value. If get_system_device_crosststamp() receives a counter value
previous to cycle_last, it consults the history provided as an
argument in history_ref and interpolates the realtime and monotonic
raw system time using the provided counter value. If there are any
clock discontinuities, e.g. from calling settimeofday(), the monotonic
raw time is interpolated in the usual way, but the realtime clock time
is adjusted by scaling the monotonic raw adjustment.
When an accessor function is used a history argument *must* be
provided. The history is initialized using ktime_get_snapshot() and
must be called before the counter values are read.
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: kevin.b.stanton@intel.com
Cc: kevin.j.clarke@intel.com
Cc: hpa@zytor.com
Cc: jeffrey.t.kirsher@intel.com
Cc: netdev@vger.kernel.org
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Christopher S. Hall <christopher.s.hall@intel.com>
[jstultz: Fixed up cycles_t/cycle_t type confusion]
Signed-off-by: John Stultz <john.stultz@linaro.org>
|
|
synchronization
ACKNOWLEDGMENT: cross timestamp code was developed by Thomas Gleixner
<tglx@linutronix.de>. It has changed considerably and any mistakes are
mine.
The precision with which events on multiple networked systems can be
synchronized using, as an example, PTP (IEEE 1588, 802.1AS) is limited
by the precision of the cross timestamps between the system clock and
the device (timestamp) clock. Precision here is the degree of
simultaneity when capturing the cross timestamp.
Currently the PTP cross timestamp is captured in software using the
PTP device driver ioctl PTP_SYS_OFFSET. Reads of the device clock are
interleaved with reads of the realtime clock. At best, the precision
of this cross timestamp is on the order of several microseconds due to
software latencies. Sub-microsecond precision is required for
industrial control and some media applications. To achieve this level
of precision hardware supported cross timestamping is needed.
The function get_device_system_crosstimestamp() allows device drivers
to return a cross timestamp with system time properly scaled to
nanoseconds. The realtime value is needed to discipline that clock
using PTP and the monotonic raw value is used for applications that
don't require a "real" time, but need an unadjusted clock time. The
get_device_system_crosstimestamp() code calls back into the driver to
ensure that the system counter is within the current timekeeping
update interval.
Modern Intel hardware provides an Always Running Timer (ART) which is
exactly related to TSC through a known frequency ratio. The ART is
routed to devices on the system and is used to precisely and
simultaneously capture the device clock with the ART.
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: kevin.b.stanton@intel.com
Cc: kevin.j.clarke@intel.com
Cc: hpa@zytor.com
Cc: jeffrey.t.kirsher@intel.com
Cc: netdev@vger.kernel.org
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Christopher S. Hall <christopher.s.hall@intel.com>
[jstultz: Reworked to remove extra structures and simplify calling]
Signed-off-by: John Stultz <john.stultz@linaro.org>
|
|
The code in ktime_get_snapshot() is a superset of the code in
ktime_get_raw_and_real() code. Further, ktime_get_raw_and_real() is
called only by the PPS code, pps_get_ts(). Consolidate the
pps_get_ts() code into a single function calling ktime_get_snapshot()
and eliminate ktime_get_raw_and_real(). A side effect of this is that
the raw and real results of pps_get_ts() correspond to exactly the
same clock cycle. Previously these values represented separate reads
of the system clock.
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: kevin.b.stanton@intel.com
Cc: kevin.j.clarke@intel.com
Cc: hpa@zytor.com
Cc: jeffrey.t.kirsher@intel.com
Cc: netdev@vger.kernel.org
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Christopher S. Hall <christopher.s.hall@intel.com>
Signed-off-by: John Stultz <john.stultz@linaro.org>
|
|
In the current timekeeping code there isn't any interface to
atomically capture the current relationship between the system counter
and system time. ktime_get_snapshot() returns this triple (counter,
monotonic raw, realtime) in the system_time_snapshot struct.
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: kevin.b.stanton@intel.com
Cc: kevin.j.clarke@intel.com
Cc: hpa@zytor.com
Cc: jeffrey.t.kirsher@intel.com
Cc: netdev@vger.kernel.org
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Christopher S. Hall <christopher.s.hall@intel.com>
[jstultz: Moved structure definitions around to clean things up,
fixed cycles_t/cycle_t confusion.]
Signed-off-by: John Stultz <john.stultz@linaro.org>
|
|
Drop support for platform data passed via a C-structure and switch to
device properties instead, which should make the driver compatible with all
platforms: OF, ACPI and static boards. Static boards should use property
sets to communicate device parameters to the driver.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into clk-next
Pull i.MX clk updates from Shawn Guo:
The i.MX clock update for 4.6:
- Add the clock driver support for the latest i.MX6 family SoCs
addition - i.MX6QP.
- Clean up the whitespace in i.MX6UL clock driver and add the missing
KPP clock.
- Correct pwm7 clock name in i.MX6UL clock driver.
* tag 'imx-clk-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
clk: imx: add kpp clock for i.MX6UL
clk: imx: whitespace cleanup; no functional change
clk: imx: correct pwm7 clock name in driver for i.MX6UL
clk: imx: Add clock support for imx6qp
|
|
We should modify TIRs explicitly to apply the new RSS configuration.
The light ndo close/open calls do not "refresh" them.
Fixes: 2d75b2bc8a8c ('net/mlx5e: Add ethtool RSS configuration options')
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
This patch restructures the DMA bus settings and this is done
by introducing a new platform structure used for programming
the AXI Bus Mode Register inside the DMA module.
This structure can be populated from device-tree as documented in the
binding txt file.
After initializing the DMA, the AXI register can be optionally tuned
for platform drivers based.
This patch also reworks some parameters to make coherent the DMA
configuration now that AXI register is introduced.
For example, the burst_len is managed by using the mentioned axi
support above; so the snps,burst-len parameter has been removed.
It makes sense to provide the AAL parameter from DT to Address-Aligned
Beats inside the Register0 and review the PBL settings when initialize
the engine.
For PCI glue, rebuilding the story of this setting, it
was added to align a configuration so not for fixing some
known problem. No issue raised after this patch.
It is safe to use the default burst length instead of
tuning it to the maximum value
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Complete masquerading support by allowing port range selection.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
With the previous patches in place, a netns nf_hook_list might be empty,
even if e.g. init_net performs filtering.
Thus change nf_hook_thresh to check the hook_list as well before
initializing hook_state and calling nf_hook_slow().
We still make use of static keys; if no netfilter modules are loaded
list is guaranteed to be empty.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
delay hook registration until the table is being requested inside a
namespace.
Historically, a particular table (iptables mangle, ip6tables filter, etc)
was registered on module load.
When netns support was added to iptables only the ip/ip6tables ruleset was
made namespace aware, not the actual hook points.
This means f.e. that when ipt_filter table/module is loaded on a system,
then each namespace on that system has an (empty) iptables filter ruleset.
In other words, if a namespace sends a packet, such skb is 'caught' by
netfilter machinery and fed to hooking points for that table (i.e. INPUT,
FORWARD, etc).
Thanks to Eric Biederman, hooks are no longer global, but per namespace.
This means that we can avoid allocation of empty ruleset in a namespace and
defer hook registration until we need the functionality.
We register a tables hook entry points ONLY in the initial namespace.
When an iptables get/setockopt is issued inside a given namespace, we check
if the table is found in the per-namespace list.
If not, we attempt to find it in the initial namespace, and, if found,
create an empty default table in the requesting namespace and register the
needed hooks.
Hook points are destroyed only once namespace is deleted, there is no
'usage count' (it makes no sense since there is no 'remove table' operation
in xtables api).
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
This change prepares for upcoming on-demand xtables hook registration.
We change the protoypes of the register/unregister functions.
A followup patch will then add nf_hook_register/unregister calls
to the iptables one.
Once a hook is registered packets will be picked up, so all assignments
of the form
net->ipv4.iptable_$table = new_table
have to be moved to ip(6)t_register_table, else we can see NULL
net->ipv4.iptable_$table later.
This patch doesn't change functionality; without this the actual change
simply gets too big.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
Instead of using old GPIO API, let's switch to GPIOD API, which
automatically handles polarity.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
next/drivers
Merge "OMAP-GPMC: Add address/data muxed timings" from Roger Quadros:
* Add support for the GPMC Advanced AAD (address/data muxed) timings
on hardware supporting the feature like the AM335x and DM816X.
* tag 'gpmc-omap-for-v4.6' of https://github.com/rogerq/linux:
dt-bindings: bus: ti-gpmc: Add AAD timings properties
memory: omap-gpmc: Add support for AAD timings
|
|
Instead of forcing bridges to implement empty callbacks make them all
optional.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
MIPI DSI devices are inherently aware of their host because they share a
parent-child hierarchy in the device tree.
Non-DSI drivers that create DSI device don't have this data. In order to
get this information, they require to a phandle to the DSI host in the
device tree.
Maintain a list of all the DSI hosts that are currently registered. This
list will be used to find the struct mipi_dsi_host corresponding to the
device tree node passed to of_find_mipi_dsi_host_by_node().
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
A driver calling mipi_dsi_device_register_full() might want to remove
the device once it's done. It might also require it in an error handling
path in case something went wrong.
Create mipi_dsi_device_unregister() for this purpose and use it within
mipi_dsi_remove_device_fn() as it does the same thing.
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add a device name field in struct mipi_dsi_device. This name is not the
same as the device name (which is of the format "hostname.reg"). When
the device is created via DT, this name is set to the modalias string.
In the non-DT case, the driver creating the DSI device provides the
name by populating a field in struct mipi_dsi_device_info.
Matching for DT case would be as it was before. For the non-DT case, we
compare the device and driver names. Other buses (like I2C/SPI) perform
a non-DT match by comparing the device name and entries in the driver's
id_table. Such a mechanism isn't used for the DSI bus.
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Use mipi_dsi_device_register_full() for device creation. This takes in
a struct mipi_dsi_device_info as a template to populate the DSI device
information.
The reason to introduce this is to have a way to create DSI devices not
available via DT. Drivers that want to create a DSI device can populate
a struct mipi_dsi_device_info and call this function. For DSI devices
available via DT, of_mipi_dsi_device_add() is used as before, but this
now calls mipi_dsi_device_register_full() internally.
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Instead of providing asynchronous checks for the nohz subsystem to verify
posix cpu timers tick dependency, migrate the latter to the new mask.
In order to keep track of the running timers and expose the tick
dependency accordingly, we must probe the timers queuing and dequeuing
on threads and process lists.
Unfortunately it implies both task and signal level dependencies. We
should be able to further optimize this and merge all that on the task
level dependency, at the cost of a bit of complexity and may be overhead.
Reviewed-by: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
|
|
Instead of providing asynchronous checks for the nohz subsystem to verify
sched tick dependency, migrate sched to the new mask.
Everytime a task is enqueued or dequeued, we evaluate the state of the
tick dependency on top of the policy of the tasks in the runqueue, by
order of priority:
SCHED_DEADLINE: Need the tick in order to periodically check for runtime
SCHED_FIFO : Don't need the tick (no round-robin)
SCHED_RR : Need the tick if more than 1 task of the same priority
for round robin (simplified with checking if more than
one SCHED_RR task no matter what priority).
SCHED_NORMAL : Need the tick if more than 1 task for round-robin.
We could optimize that further with one flag per sched policy on the tick
dependency mask and perform only the checks relevant to the policy
concerned by an enqueue/dequeue operation.
Since the checks aren't based on the current task anymore, we could get
rid of the task switch hook but it's still needed for posix cpu
timers.
Reviewed-by: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
|
|
Instead of providing asynchronous checks for the nohz subsystem to verify
perf event tick dependency, migrate perf to the new mask.
Perf needs the tick for two situations:
1) Freq events. We could set the tick dependency when those are
installed on a CPU context. But setting a global dependency on top of
the global freq events accounting is much easier. If people want that
to be optimized, we can still refine that on the per-CPU tick dependency
level. This patch dooesn't change the current behaviour anyway.
2) Throttled events: this is a per-cpu dependency.
Reviewed-by: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
|
|
It makes nohz tracing more lightweight, standard and easier to parse.
Examples:
user_loop-2904 [007] d..1 517.701126: tick_stop: success=1 dependency=NONE
user_loop-2904 [007] dn.1 518.021181: tick_stop: success=0 dependency=SCHED
posix_timers-6142 [007] d..1 1739.027400: tick_stop: success=0 dependency=POSIX_TIMER
user_loop-5463 [007] dN.1 1185.931939: tick_stop: success=0 dependency=PERF_EVENTS
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
|
|
The tick dependency is evaluated on every IRQ and context switch. This
consists is a batch of checks which determine whether it is safe to
stop the tick or not. These checks are often split in many details:
posix cpu timers, scheduler, sched clock, perf events.... each of which
are made of smaller details: posix cpu timer involves checking process
wide timers then thread wide timers. Perf involves checking freq events
then more per cpu details.
Checking these informations asynchronously every time we update the full
dynticks state bring avoidable overhead and a messy layout.
Let's introduce instead tick dependency masks: one for system wide
dependency (unstable sched clock, freq based perf events), one for CPU
wide dependency (sched, throttling perf events), and task/signal level
dependencies (posix cpu timers). The subsystems are responsible
for setting and clearing their dependency through a set of APIs that will
take care of concurrent dependency mask modifications and kick targets
to restart the relevant CPU tick whenever needed.
This new dependency engine stays beside the old one until all subsystems
having a tick dependency are converted to it.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Chris Metcalf <cmetcalf@ezchip.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
|
|
Latest virtio spec says the feature bit name is VIRTIO_BLK_F_FLUSH,
VIRTIO_BLK_F_WCE is the legacy name. virtio blk header says exactly the
reverse - fix that and update driver code to match.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This leaves vring_new_virtqueue alone for compatbility, but it
adds two new improved APIs:
vring_create_virtqueue: Creates a virtqueue backed by automatically
allocated coherent memory. (Some day it this could be extended to
support non-coherent memory, too, if there ends up being a platform
on which it's worthwhile.)
__vring_new_virtqueue: Creates a virtqueue with a manually-specified
layout. This should allow mic_virtio to work much more cleanly.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
We are going to require dma_ops for several common drivers, even for
systems that do have an identity mapping. Lets provide some minimal
no-op dma_ops that can be used for that purpose.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Add helper function to set the state of active-discharge of
regulator using regmap. The HW regulator driver can directly
use this by providing the necessary information in the regulator
descriptor.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add support to enable/disable active discharge of regulator via
machine constraints. This configuration is done when setting
machine constraint during regulator register and if regulator
driver implemented the callback ops.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fix these compiler warnings:
media-git/include/media/media-device.h: In function 'media_device_pci_init':
media-git/include/media/media-device.h:610:9: warning: 'return' with a value, in function returning void
return NULL;
^
media-git/include/media/media-device.h: In function '__media_device_usb_init':
media-git/include/media/media-device.h:618:9: warning: 'return' with a value, in function returning void
return NULL;
^
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
|
|
into drm-next
imx-drm vblank IRQ control, fence support, and of endpoint helpers
- Add and make use of drm_of_active_endpoint helpers
- Silence a noisy dev_info into a dev_dbg
- Stop touching primary fb on pageflips
- Track flip state explicitly
- Keep GEM buffer objects referenced while scanout is active
- Implement fence sync by deferring flips to a workqueue for
dma-bufs with pending fences
- Actually disable vblank IRQs while they are not needed
* tag 'imx-drm-next-20160301' of git://git.pengutronix.de/git/pza/linux:
drm/imx: only enable vblank IRQs when needed
drm/imx: implement fence sync
drm/imx: keep GEM object referenced as long as scanout is active
drm/imx: track flip state explicitly
drm/imx: don't touch primary fb on pageflip
drm/imx: ipuv3 plane: Replace dev_info with dev_dbg if a plane's CRTC changes
gpu: ipu-v3: ipu-dc: Simplify display controller microcode setup
drm/rockchip: remove rockchip_drm_encoder_get_mux_id
drm/imx: remove imx_drm_encoder_get_mux_id
drm: add drm_of_encoder_active_endpoint helpers
|
