| Age | Commit message (Collapse) | Author |
|---|
|
Commit <17de3f5fdd35> ("iommu: Retire bus ops") removes iommu ops from
bus. The iommu subsystem no longer relies on bus for operations. So the
bus parameter in iommu_domain_alloc() is no longer relevant.
Add a new interface named iommu_paging_domain_alloc(), which explicitly
indicates the allocation of a paging domain for DMA managed by a kernel
driver. The new interface takes a device pointer as its parameter, that
better aligns with the current iommu subsystem.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20240610085555.88197-2-baolu.lu@linux.intel.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Previously, the domain that a page fault targets is stored in an
iopf_group, which represents a minimal set of page faults. With the
introduction of attach handle, replace the domain with the handle
so that the fault handler can obtain more information as needed
when handling the faults.
iommu_report_device_fault() is currently used for SVA page faults,
which handles the page fault in an internal cycle. The domain is retrieved
with iommu_get_domain_for_dev_pasid() if the pasid in the fault message
is valid. This doesn't work in IOMMUFD case, where if the pasid table of
a device is wholly managed by user space, there is no domain attached to
the PASID of the device, and all page faults are forwarded through a
NESTING domain attaching to RID.
Add a static flag in iommu ops, which indicates if the IOMMU driver
supports user-managed PASID tables. In the iopf deliver path, if no
attach handle found for the iopf PASID, roll back to RID domain when
the IOMMU driver supports this capability.
iommu_get_domain_for_dev_pasid() is no longer used and can be removed.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240702063444.105814-4-baolu.lu@linux.intel.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The struct sva_iommu represents an association between an SVA domain and
a PASID of a device. It's stored in the iommu group's pasid array and also
tracked by a list in the per-mm data structure. Removes duplicate tracking
of sva_iommu by eliminating the list.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240702063444.105814-3-baolu.lu@linux.intel.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Currently, when attaching a domain to a device or its PASID, domain is
stored within the iommu group. It could be retrieved for use during the
window between attachment and detachment.
With new features introduced, there's a need to store more information
than just a domain pointer. This information essentially represents the
association between a domain and a device. For example, the SVA code
already has a custom struct iommu_sva which represents a bond between
sva domain and a PASID of a device. Looking forward, the IOMMUFD needs
a place to store the iommufd_device pointer in the core, so that the
device object ID could be quickly retrieved in the critical fault handling
path.
Introduce domain attachment handle that explicitly represents the
attachment relationship between a domain and a device or its PASID.
Co-developed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20240702063444.105814-2-baolu.lu@linux.intel.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
The 'type' string passed to thermal_of_cooling_device_register() is a
'const char *', so do the same in the devm interface.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240703083141.96013-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
No function in the QMC API is available to get the number of phandles
present in a phandle list.
Fill this lack introducing qmc_chan_count_phandles().
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://patch.msgid.link/20240701113038.55144-9-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
qmc_chan_get_byphandle() and the resource managed version retrieve a
channel from a simple phandle.
Extend the API and introduce qmc_chan_get_byphandles_index() and the
resource managed version in order to retrieve a channel from a phandle
list using the provided index to identify the phandle in the list.
Also update qmc_chan_get_byphandle() and the resource managed version to
use qmc_chan_get_byphandles_index() and so avoid code duplication.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Link: https://patch.msgid.link/20240701113038.55144-8-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The KEBA CP500 system FPGA is a PCIe device, which consists of multiple
IP cores. Every IP core has its own auxiliary driver. The cp500 driver
registers an auxiliary device for each device and the corresponding
drivers are loaded by the Linux driver infrastructure.
Currently 3 variants of this device exists. Every variant has its own
PCI device ID, which is used to determine the list of available IP
cores. In this first version only the auxiliary device for the I2C
controller is registered.
Besides the auxiliary device registration some other basic functions of
the FPGA are implemented; e.g, FPGA version sysfs file, keep FPGA
configuration on reset sysfs file, error message for errors on the
internal AXI bus of the FPGA.
Signed-off-by: Gerhard Engleder <eg@keba.com>
Link: https://lore.kernel.org/r/20240630194740.7137-2-gerhard@engleder-embedded.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The ata_sas_port_alloc() wrapper mainly exists in order to export the
internal libata function which it wraps. The secondary reason is that
it initializes some ata_port struct members.
However, ata_sas_port_alloc() is only used in a single location,
sas_ata_init(), which already performs some ata_port struct member
initialization, so it does not make sense to spread this initialization
out over two separate locations.
Thus, remove the wrapper and instead export the libata function directly,
and move the libsas specific ata_port initialization to sas_ata_init(),
which already does some ata_port initialization.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240703184418.723066-19-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
ap->local_port_no is simply ap->port_no + 1.
Since ap->local_port_no can be derived from ap->port_no, there is no need
for the ap->local_port_no struct member, so remove ap->local_port_no.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240703184418.723066-16-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
Commit f31871951b38 ("libata: separate out ata_host_alloc() and
ata_host_register()") added ata_host_alloc(), where the API allowed
a LLD to overallocate the number of ports supplied to ata_host_alloc(),
as long as the LLD decreased host->n_ports before calling
ata_host_register().
However, this functionally has never ever been used by a single LLD.
Because of the current API design, the assignment of ap->print_id is
deferred until registration time, which is bad, because that means that
the ata_port_*() print functions cannot be used by a LLD until after
registration time, which means that a LLD is forced to use a print
function that is non-port specific, even for a port specific error.
Remove the support for decreasing the number of ports, such that it will
be possible to assign ap->print_id earlier.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240703184418.723066-14-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
Remove unused function declaration for ata_scsi_detect().
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240703184418.723066-13-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
The ata_sas_tport_add() and ata_sas_tport_delete() wrappers only exist in
order to export the internal libata functions which they wrap.
Remove the wrappers and instead export the libata functions directly.
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20240703184418.723066-12-cassel@kernel.org
Signed-off-by: Niklas Cassel <cassel@kernel.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO: 2nd set of new device support, features and cleanup for 6.11
The big one here is we finally have Paul Cercueil's (and others)
DMA buffer support for IIO devices enabling high speed zero
copy transfer of data to and from sensors supported by IIO (and for
example USB). This should aid with upstream support of a range of
higher performance ADCs and DACs.
Two merges from other trees
- spi/spi_devm_optimize used for simplification in ad7944.
- dmaengine/topic_dma_vec to enable the DMABUF series.
One feature with impact outside IIO.
- Richer set of dev_err_probe() like helpers to cover ERR_PTR() cases.
New device support
==================
adi,ad7173
- Add support for AD4111, AD4112, AD4114, AD4115 and ADC4116 pseudo
differential ADCs. Major driver rework was needed to enabled these.
adi,ad7944
- Use devm_spi_optimize_message() to avoid a local devm cleanup
callback. This is the example case from the patch set, others will
follow.
mediatek,mt6359-auxadc
- New driver for this ADC IP found in MT6357, MT6358 and MT6359 PMICs.
st,accel
- Add support for the LIS2DS12 accelerometer
ti,ads1119
- New driver for this 16 bit 2-differential or 4-single ended channel
ADC.
Features
========
dt-bindings
- Introduce new common-mode-channel property to help handle pseudo
differential ADCs where we have something that looks like one side
of differential input, but which is only suited for use with a
slow moving reference.
adi,adf4350
- Support use as a clock provider.
iio-hmwon
- Support reading of labels from IIO devices by their consumers and
use this in the hwmon bridge.
Cleanup and minor fixes
=======================
Treewide
- Use regmap_clear_bits() / regmap_set_bits() to simplify open coded
equivalents.
- Use devm_regulator_get_enable_read_voltage() to replace equivalent
opencoded boilerplate. In some cases enabled complete conversion to
devm handling and removal of explicit remove() callbacks.
- Introduce dev_err_ptr_probe() and other variants and make use of
of them in a couple of examples driver cleanups. Will find use in
many more drivers soon.
adi,ad7192
- Introduce local struct device *dev and use dev_err_probe() to give
more readable code.
adi,adi-axi-adc/dac
- Improved consistency of messages using dev_err_probe()
adi,adis
- Split the trigger handling into cases that needed paging and those that
don't resulting in more readable code.
- Use cleanup.h to simplify error paths via scoped cleanup.
- Add adis specific lock helpers and make use of them in a number of drivers.
adi,ad7192
- Update maintainer (Alisa-Dariana Roman)
adi,ad7606
- dt-binding cleanup.
avago,apds9306
- Add a maintainer entry (Subhajit Ghosh)
linear,ltc2309
- Fix a wrong endian type.
st,stm32-dfsdm
- Fix a missing port property in the dt-binding.
st,sensors
- Relax whoami match failure to a warning print rather than probe failure.
This enables fallback compatibles to existing parts from those that don't
necessarily even exit yet.
* tag 'iio-for-6.11b' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (112 commits)
iio: adc: ad7173: Fix uninitialized symbol is_current_chan
iio: adc: Add support for MediaTek MT6357/8/9 Auxiliary ADC
math.h: Add unsigned 8 bits fractional numbers type
dt-bindings: iio: adc: Add MediaTek MT6359 PMIC AUXADC
iio: common: scmi_iio: convert to dev_err_probe()
iio: backend: make use of dev_err_cast_probe()
iio: temperature: ltc2983: convert to dev_err_probe()
dev_printk: add new dev_err_probe() helpers
iio: xilinx-ams: Add labels
iio: adc: ad7944: use devm_spi_optimize_message()
Documentation: iio: Document high-speed DMABUF based API
iio: buffer-dmaengine: Support new DMABUF based userspace API
iio: buffer-dma: Enable support for DMABUFs
iio: core: Add new DMABUF interface infrastructure
MAINTAINERS: Update AD7192 driver maintainer
iio: adc: ad7192: use devm_regulator_get_enable_read_voltage
iio: st_sensors: relax WhoAmI check in st_sensors_verify_id()
MAINTAINERS: Add AVAGO APDS9306
dt-bindings: iio: adc: adi,ad7606: comment and sort the compatible names
dt-bindings: iio: adc: adi,ad7606: add missing datasheet link
...
|
|
Commit c6e56cf6b2e7 ("block: move integrity information into
queue_limits") changed the ref tag calculation logic. It would break if
there is no integrity profile. This in turn causes read/write failures
for such cases.
Fixes: c6e56cf6b2e7 ("block: move integrity information into queue_limits")
Signed-off-by: Anuj Gupta <anuj20.g@samsung.com>
Link: https://lore.kernel.org/r/20240704061515.282343-1-joshi.k@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently users of the interrupt simulator don't have any way of being
notified about interrupts from the simulated domain being requested or
released. This causes a problem for one of the users - the GPIO
simulator - which is unable to lock the pins as interrupts.
Define a structure containing callbacks to be executed on various
irq_sim-related events (for now: irq request and release) and provide an
extended function for creating simulated interrupt domains that takes it
and a pointer to custom user data (to be passed to said callbacks) as
arguments.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240624093934.17089-2-brgl@bgdev.pl
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
|
|
While investigating HVO for THPs [1], it turns out that speculative PFN
walkers like compaction can race with vmemmap modifications, e.g.,
CPU 1 (vmemmap modifier) CPU 2 (speculative PFN walker)
------------------------------- ------------------------------
Allocates an LRU folio page1
Sees page1
Frees page1
Allocates a hugeTLB folio page2
(page1 being a tail of page2)
Updates vmemmap mapping page1
get_page_unless_zero(page1)
Even though page1->_refcount is zero after HVO, get_page_unless_zero() can
still try to modify this read-only field, resulting in a crash.
An independent report [2] confirmed this race.
There are two discussed approaches to fix this race:
1. Make RO vmemmap RW so that get_page_unless_zero() can fail without
triggering a PF.
2. Use RCU to make sure get_page_unless_zero() either sees zero
page->_refcount through the old vmemmap or non-zero page->_refcount
through the new one.
The second approach is preferred here because:
1. It can prevent illegal modifications to struct page[] that has been
HVO'ed;
2. It can be generalized, in a way similar to ZERO_PAGE(), to fix
similar races in other places, e.g., arch_remove_memory() on x86
[3], which frees vmemmap mapping offlined struct page[].
While adding synchronize_rcu(), the goal is to be surgical, rather than
optimized. Specifically, calls to synchronize_rcu() on the error handling
paths can be coalesced, but it is not done for the sake of Simplicity:
noticeably, this fix removes ~50% more lines than it adds.
According to the hugetlb_optimize_vmemmap section in
Documentation/admin-guide/sysctl/vm.rst, enabling HVO makes allocating or
freeing hugeTLB pages "~2x slower than before". Having synchronize_rcu()
on top makes those operations even worse, and this also affects the user
interface /proc/sys/vm/nr_overcommit_hugepages.
This is *very* hard to trigger:
1. Most hugeTLB use cases I know of are static, i.e., reserved at
boot time, because allocating at runtime is not reliable at all.
2. On top of that, someone has to be very unlucky to get tripped
over above, because the race window is so small -- I wasn't able to
trigger it with a stress testing that does nothing but that (with
THPs though).
[1] https://lore.kernel.org/20240229183436.4110845-4-yuzhao@google.com/
[2] https://lore.kernel.org/917FFC7F-0615-44DD-90EE-9F85F8EA9974@linux.dev/
[3] https://lore.kernel.org/be130a96-a27e-4240-ad78-776802f57cad@redhat.com/
Link: https://lkml.kernel.org/r/20240627222705.2974207-1-yuzhao@google.com
Signed-off-by: Yu Zhao <yuzhao@google.com>
Acked-by: Muchun Song <muchun.song@linux.dev>
Cc: David Hildenbrand <david@redhat.com>
Cc: Frank van der Linden <fvdl@google.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Yang Shi <yang@os.amperecomputing.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
syzbot detects that cachestat() is flushing stats, which can sleep, in its
RCU read section (see [1]). This is done in the workingset_test_recent()
step (which checks if the folio's eviction is recent).
Move the stat flushing step to before the RCU read section of cachestat,
and skip stat flushing during the recency check.
[1]: https://lore.kernel.org/cgroups/000000000000f71227061bdf97e0@google.com/
Link: https://lkml.kernel.org/r/20240627201737.3506959-1-nphamcs@gmail.com
Fixes: b00684722262 ("mm: workingset: move the stats flush into workingset_test_recent()")
Signed-off-by: Nhat Pham <nphamcs@gmail.com>
Reported-by: syzbot+b7f13b2d0cc156edf61a@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/cgroups/000000000000f71227061bdf97e0@google.com/
Debugged-by: Johannes Weiner <hannes@cmpxchg.org>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Kairui Song <kasong@tencent.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: <stable@vger.kernel.org> [6.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/filemap: Limit page cache size to that supported by
xarray", v2.
Currently, xarray can't support arbitrary page cache size. More details
can be found from the WARN_ON() statement in xas_split_alloc(). In our
test whose code is attached below, we hit the WARN_ON() on ARM64 system
where the base page size is 64KB and huge page size is 512MB. The issue
was reported long time ago and some discussions on it can be found here
[1].
[1] https://www.spinics.net/lists/linux-xfs/msg75404.html
In order to fix the issue, we need to adjust MAX_PAGECACHE_ORDER to one
supported by xarray and avoid PMD-sized page cache if needed. The code
changes are suggested by David Hildenbrand.
PATCH[1] adjusts MAX_PAGECACHE_ORDER to that supported by xarray
PATCH[2-3] avoids PMD-sized page cache in the synchronous readahead path
PATCH[4] avoids PMD-sized page cache for shmem files if needed
Test program
============
# cat test.c
#define _GNU_SOURCE
#include <stdio.h>
#include <stdlib.h>
#include <unistd.h>
#include <string.h>
#include <fcntl.h>
#include <errno.h>
#include <sys/syscall.h>
#include <sys/mman.h>
#define TEST_XFS_FILENAME "/tmp/data"
#define TEST_SHMEM_FILENAME "/dev/shm/data"
#define TEST_MEM_SIZE 0x20000000
int main(int argc, char **argv)
{
const char *filename;
int fd = 0;
void *buf = (void *)-1, *p;
int pgsize = getpagesize();
int ret;
if (pgsize != 0x10000) {
fprintf(stderr, "64KB base page size is required\n");
return -EPERM;
}
system("echo force > /sys/kernel/mm/transparent_hugepage/shmem_enabled");
system("rm -fr /tmp/data");
system("rm -fr /dev/shm/data");
system("echo 1 > /proc/sys/vm/drop_caches");
/* Open xfs or shmem file */
filename = TEST_XFS_FILENAME;
if (argc > 1 && !strcmp(argv[1], "shmem"))
filename = TEST_SHMEM_FILENAME;
fd = open(filename, O_CREAT | O_RDWR | O_TRUNC);
if (fd < 0) {
fprintf(stderr, "Unable to open <%s>\n", filename);
return -EIO;
}
/* Extend file size */
ret = ftruncate(fd, TEST_MEM_SIZE);
if (ret) {
fprintf(stderr, "Error %d to ftruncate()\n", ret);
goto cleanup;
}
/* Create VMA */
buf = mmap(NULL, TEST_MEM_SIZE,
PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0);
if (buf == (void *)-1) {
fprintf(stderr, "Unable to mmap <%s>\n", filename);
goto cleanup;
}
fprintf(stdout, "mapped buffer at 0x%p\n", buf);
ret = madvise(buf, TEST_MEM_SIZE, MADV_HUGEPAGE);
if (ret) {
fprintf(stderr, "Unable to madvise(MADV_HUGEPAGE)\n");
goto cleanup;
}
/* Populate VMA */
ret = madvise(buf, TEST_MEM_SIZE, MADV_POPULATE_WRITE);
if (ret) {
fprintf(stderr, "Error %d to madvise(MADV_POPULATE_WRITE)\n", ret);
goto cleanup;
}
/* Punch the file to enforce xarray split */
ret = fallocate(fd, FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE,
TEST_MEM_SIZE - pgsize, pgsize);
if (ret)
fprintf(stderr, "Error %d to fallocate()\n", ret);
cleanup:
if (buf != (void *)-1)
munmap(buf, TEST_MEM_SIZE);
if (fd > 0)
close(fd);
return 0;
}
# gcc test.c -o test
# cat /proc/1/smaps | grep KernelPageSize | head -n 1
KernelPageSize: 64 kB
# ./test shmem
:
------------[ cut here ]------------
WARNING: CPU: 17 PID: 5253 at lib/xarray.c:1025 xas_split_alloc+0xf8/0x128
Modules linked in: nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib \
nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct \
nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 \
ip_set nf_tables rfkill nfnetlink vfat fat virtio_balloon \
drm fuse xfs libcrc32c crct10dif_ce ghash_ce sha2_ce sha256_arm64 \
virtio_net sha1_ce net_failover failover virtio_console virtio_blk \
dimlib virtio_mmio
CPU: 17 PID: 5253 Comm: test Kdump: loaded Tainted: G W 6.10.0-rc5-gavin+ #12
Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20240524-1.el9 05/24/2024
pstate: 83400005 (Nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--)
pc : xas_split_alloc+0xf8/0x128
lr : split_huge_page_to_list_to_order+0x1c4/0x720
sp : ffff80008a92f5b0
x29: ffff80008a92f5b0 x28: ffff80008a92f610 x27: ffff80008a92f728
x26: 0000000000000cc0 x25: 000000000000000d x24: ffff0000cf00c858
x23: ffff80008a92f610 x22: ffffffdfc0600000 x21: 0000000000000000
x20: 0000000000000000 x19: ffffffdfc0600000 x18: 0000000000000000
x17: 0000000000000000 x16: 0000018000000000 x15: 3374004000000000
x14: 0000e00000000000 x13: 0000000000002000 x12: 0000000000000020
x11: 3374000000000000 x10: 3374e1c0ffff6000 x9 : ffffb463a84c681c
x8 : 0000000000000003 x7 : 0000000000000000 x6 : ffff00011c976ce0
x5 : ffffb463aa47e378 x4 : 0000000000000000 x3 : 0000000000000cc0
x2 : 000000000000000d x1 : 000000000000000c x0 : 0000000000000000
Call trace:
xas_split_alloc+0xf8/0x128
split_huge_page_to_list_to_order+0x1c4/0x720
truncate_inode_partial_folio+0xdc/0x160
shmem_undo_range+0x2bc/0x6a8
shmem_fallocate+0x134/0x430
vfs_fallocate+0x124/0x2e8
ksys_fallocate+0x4c/0xa0
__arm64_sys_fallocate+0x24/0x38
invoke_syscall.constprop.0+0x7c/0xd8
do_el0_svc+0xb4/0xd0
el0_svc+0x44/0x1d8
el0t_64_sync_handler+0x134/0x150
el0t_64_sync+0x17c/0x180
This patch (of 4):
The largest page cache order can be HPAGE_PMD_ORDER (13) on ARM64 with
64KB base page size. The xarray entry with this order can't be split as
the following error messages indicate.
------------[ cut here ]------------
WARNING: CPU: 35 PID: 7484 at lib/xarray.c:1025 xas_split_alloc+0xf8/0x128
Modules linked in: nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib \
nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct \
nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 \
ip_set rfkill nf_tables nfnetlink vfat fat virtio_balloon drm \
fuse xfs libcrc32c crct10dif_ce ghash_ce sha2_ce sha256_arm64 \
sha1_ce virtio_net net_failover virtio_console virtio_blk failover \
dimlib virtio_mmio
CPU: 35 PID: 7484 Comm: test Kdump: loaded Tainted: G W 6.10.0-rc5-gavin+ #9
Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20240524-1.el9 05/24/2024
pstate: 83400005 (Nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--)
pc : xas_split_alloc+0xf8/0x128
lr : split_huge_page_to_list_to_order+0x1c4/0x720
sp : ffff800087a4f6c0
x29: ffff800087a4f6c0 x28: ffff800087a4f720 x27: 000000001fffffff
x26: 0000000000000c40 x25: 000000000000000d x24: ffff00010625b858
x23: ffff800087a4f720 x22: ffffffdfc0780000 x21: 0000000000000000
x20: 0000000000000000 x19: ffffffdfc0780000 x18: 000000001ff40000
x17: 00000000ffffffff x16: 0000018000000000 x15: 51ec004000000000
x14: 0000e00000000000 x13: 0000000000002000 x12: 0000000000000020
x11: 51ec000000000000 x10: 51ece1c0ffff8000 x9 : ffffbeb961a44d28
x8 : 0000000000000003 x7 : ffffffdfc0456420 x6 : ffff0000e1aa6eb8
x5 : 20bf08b4fe778fca x4 : ffffffdfc0456420 x3 : 0000000000000c40
x2 : 000000000000000d x1 : 000000000000000c x0 : 0000000000000000
Call trace:
xas_split_alloc+0xf8/0x128
split_huge_page_to_list_to_order+0x1c4/0x720
truncate_inode_partial_folio+0xdc/0x160
truncate_inode_pages_range+0x1b4/0x4a8
truncate_pagecache_range+0x84/0xa0
xfs_flush_unmap_range+0x70/0x90 [xfs]
xfs_file_fallocate+0xfc/0x4d8 [xfs]
vfs_fallocate+0x124/0x2e8
ksys_fallocate+0x4c/0xa0
__arm64_sys_fallocate+0x24/0x38
invoke_syscall.constprop.0+0x7c/0xd8
do_el0_svc+0xb4/0xd0
el0_svc+0x44/0x1d8
el0t_64_sync_handler+0x134/0x150
el0t_64_sync+0x17c/0x180
Fix it by decreasing MAX_PAGECACHE_ORDER to the largest supported order
by xarray. For this specific case, MAX_PAGECACHE_ORDER is dropped from
13 to 11 when CONFIG_BASE_SMALL is disabled.
Link: https://lkml.kernel.org/r/20240627003953.1262512-1-gshan@redhat.com
Link: https://lkml.kernel.org/r/20240627003953.1262512-2-gshan@redhat.com
Fixes: 793917d997df ("mm/readahead: Add large folio readahead")
Signed-off-by: Gavin Shan <gshan@redhat.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Darrick J. Wong <djwong@kernel.org>
Cc: Don Dutile <ddutile@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: Zhenyu Zhang <zhenyzha@redhat.com>
Cc: <stable@vger.kernel.org> [5.18+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 5ec8e8ea8b77 ("mm/sparsemem: fix race in accessing
memory_section->usage") changed pfn_section_valid() to add a READ_ONCE()
call around "ms->usage" to fix a race with section_deactivate() where
ms->usage can be cleared. The READ_ONCE() call, by itself, is not enough
to prevent NULL pointer dereference. We need to check its value before
dereferencing it.
Link: https://lkml.kernel.org/r/20240626001639.1350646-1-longman@redhat.com
Fixes: 5ec8e8ea8b77 ("mm/sparsemem: fix race in accessing memory_section->usage")
Signed-off-by: Waiman Long <longman@redhat.com>
Cc: Charan Teja Kalla <quic_charante@quicinc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The below bug was reported on a non-SMP kernel:
[ 275.267158][ T4335] ------------[ cut here ]------------
[ 275.267949][ T4335] kernel BUG at include/linux/page_ref.h:275!
[ 275.268526][ T4335] invalid opcode: 0000 [#1] KASAN PTI
[ 275.269001][ T4335] CPU: 0 PID: 4335 Comm: trinity-c3 Not tainted 6.7.0-rc4-00061-gefa7df3e3bb5 #1
[ 275.269787][ T4335] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
[ 275.270679][ T4335] RIP: 0010:try_get_folio (include/linux/page_ref.h:275 (discriminator 3) mm/gup.c:79 (discriminator 3))
[ 275.272813][ T4335] RSP: 0018:ffffc90005dcf650 EFLAGS: 00010202
[ 275.273346][ T4335] RAX: 0000000000000246 RBX: ffffea00066e0000 RCX: 0000000000000000
[ 275.274032][ T4335] RDX: fffff94000cdc007 RSI: 0000000000000004 RDI: ffffea00066e0034
[ 275.274719][ T4335] RBP: ffffea00066e0000 R08: 0000000000000000 R09: fffff94000cdc006
[ 275.275404][ T4335] R10: ffffea00066e0037 R11: 0000000000000000 R12: 0000000000000136
[ 275.276106][ T4335] R13: ffffea00066e0034 R14: dffffc0000000000 R15: ffffea00066e0008
[ 275.276790][ T4335] FS: 00007fa2f9b61740(0000) GS:ffffffff89d0d000(0000) knlGS:0000000000000000
[ 275.277570][ T4335] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 275.278143][ T4335] CR2: 00007fa2f6c00000 CR3: 0000000134b04000 CR4: 00000000000406f0
[ 275.278833][ T4335] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 275.279521][ T4335] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 275.280201][ T4335] Call Trace:
[ 275.280499][ T4335] <TASK>
[ 275.280751][ T4335] ? die (arch/x86/kernel/dumpstack.c:421 arch/x86/kernel/dumpstack.c:434 arch/x86/kernel/dumpstack.c:447)
[ 275.281087][ T4335] ? do_trap (arch/x86/kernel/traps.c:112 arch/x86/kernel/traps.c:153)
[ 275.281463][ T4335] ? try_get_folio (include/linux/page_ref.h:275 (discriminator 3) mm/gup.c:79 (discriminator 3))
[ 275.281884][ T4335] ? try_get_folio (include/linux/page_ref.h:275 (discriminator 3) mm/gup.c:79 (discriminator 3))
[ 275.282300][ T4335] ? do_error_trap (arch/x86/kernel/traps.c:174)
[ 275.282711][ T4335] ? try_get_folio (include/linux/page_ref.h:275 (discriminator 3) mm/gup.c:79 (discriminator 3))
[ 275.283129][ T4335] ? handle_invalid_op (arch/x86/kernel/traps.c:212)
[ 275.283561][ T4335] ? try_get_folio (include/linux/page_ref.h:275 (discriminator 3) mm/gup.c:79 (discriminator 3))
[ 275.283990][ T4335] ? exc_invalid_op (arch/x86/kernel/traps.c:264)
[ 275.284415][ T4335] ? asm_exc_invalid_op (arch/x86/include/asm/idtentry.h:568)
[ 275.284859][ T4335] ? try_get_folio (include/linux/page_ref.h:275 (discriminator 3) mm/gup.c:79 (discriminator 3))
[ 275.285278][ T4335] try_grab_folio (mm/gup.c:148)
[ 275.285684][ T4335] __get_user_pages (mm/gup.c:1297 (discriminator 1))
[ 275.286111][ T4335] ? __pfx___get_user_pages (mm/gup.c:1188)
[ 275.286579][ T4335] ? __pfx_validate_chain (kernel/locking/lockdep.c:3825)
[ 275.287034][ T4335] ? mark_lock (kernel/locking/lockdep.c:4656 (discriminator 1))
[ 275.287416][ T4335] __gup_longterm_locked (mm/gup.c:1509 mm/gup.c:2209)
[ 275.288192][ T4335] ? __pfx___gup_longterm_locked (mm/gup.c:2204)
[ 275.288697][ T4335] ? __pfx_lock_acquire (kernel/locking/lockdep.c:5722)
[ 275.289135][ T4335] ? __pfx___might_resched (kernel/sched/core.c:10106)
[ 275.289595][ T4335] pin_user_pages_remote (mm/gup.c:3350)
[ 275.290041][ T4335] ? __pfx_pin_user_pages_remote (mm/gup.c:3350)
[ 275.290545][ T4335] ? find_held_lock (kernel/locking/lockdep.c:5244 (discriminator 1))
[ 275.290961][ T4335] ? mm_access (kernel/fork.c:1573)
[ 275.291353][ T4335] process_vm_rw_single_vec+0x142/0x360
[ 275.291900][ T4335] ? __pfx_process_vm_rw_single_vec+0x10/0x10
[ 275.292471][ T4335] ? mm_access (kernel/fork.c:1573)
[ 275.292859][ T4335] process_vm_rw_core+0x272/0x4e0
[ 275.293384][ T4335] ? hlock_class (arch/x86/include/asm/bitops.h:227 arch/x86/include/asm/bitops.h:239 include/asm-generic/bitops/instrumented-non-atomic.h:142 kernel/locking/lockdep.c:228)
[ 275.293780][ T4335] ? __pfx_process_vm_rw_core+0x10/0x10
[ 275.294350][ T4335] process_vm_rw (mm/process_vm_access.c:284)
[ 275.294748][ T4335] ? __pfx_process_vm_rw (mm/process_vm_access.c:259)
[ 275.295197][ T4335] ? __task_pid_nr_ns (include/linux/rcupdate.h:306 (discriminator 1) include/linux/rcupdate.h:780 (discriminator 1) kernel/pid.c:504 (discriminator 1))
[ 275.295634][ T4335] __x64_sys_process_vm_readv (mm/process_vm_access.c:291)
[ 275.296139][ T4335] ? syscall_enter_from_user_mode (kernel/entry/common.c:94 kernel/entry/common.c:112)
[ 275.296642][ T4335] do_syscall_64 (arch/x86/entry/common.c:51 (discriminator 1) arch/x86/entry/common.c:82 (discriminator 1))
[ 275.297032][ T4335] ? __task_pid_nr_ns (include/linux/rcupdate.h:306 (discriminator 1) include/linux/rcupdate.h:780 (discriminator 1) kernel/pid.c:504 (discriminator 1))
[ 275.297470][ T4335] ? lockdep_hardirqs_on_prepare (kernel/locking/lockdep.c:4300 kernel/locking/lockdep.c:4359)
[ 275.297988][ T4335] ? do_syscall_64 (arch/x86/include/asm/cpufeature.h:171 arch/x86/entry/common.c:97)
[ 275.298389][ T4335] ? lockdep_hardirqs_on_prepare (kernel/locking/lockdep.c:4300 kernel/locking/lockdep.c:4359)
[ 275.298906][ T4335] ? do_syscall_64 (arch/x86/include/asm/cpufeature.h:171 arch/x86/entry/common.c:97)
[ 275.299304][ T4335] ? do_syscall_64 (arch/x86/include/asm/cpufeature.h:171 arch/x86/entry/common.c:97)
[ 275.299703][ T4335] ? do_syscall_64 (arch/x86/include/asm/cpufeature.h:171 arch/x86/entry/common.c:97)
[ 275.300115][ T4335] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:129)
This BUG is the VM_BUG_ON(!in_atomic() && !irqs_disabled()) assertion in
folio_ref_try_add_rcu() for non-SMP kernel.
The process_vm_readv() calls GUP to pin the THP. An optimization for
pinning THP instroduced by commit 57edfcfd3419 ("mm/gup: accelerate thp
gup even for "pages != NULL"") calls try_grab_folio() to pin the THP,
but try_grab_folio() is supposed to be called in atomic context for
non-SMP kernel, for example, irq disabled or preemption disabled, due to
the optimization introduced by commit e286781d5f2e ("mm: speculative
page references").
The commit efa7df3e3bb5 ("mm: align larger anonymous mappings on THP
boundaries") is not actually the root cause although it was bisected to.
It just makes the problem exposed more likely.
The follow up discussion suggested the optimization for non-SMP kernel
may be out-dated and not worth it anymore [1]. So removing the
optimization to silence the BUG.
However calling try_grab_folio() in GUP slow path actually is
unnecessary, so the following patch will clean this up.
[1] https://lore.kernel.org/linux-mm/821cf1d6-92b9-4ac4-bacc-d8f2364ac14f@paulmck-laptop/
Link: https://lkml.kernel.org/r/20240625205350.1777481-1-yang@os.amperecomputing.com
Fixes: 57edfcfd3419 ("mm/gup: accelerate thp gup even for "pages != NULL"")
Signed-off-by: Yang Shi <yang@os.amperecomputing.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Tested-by: Oliver Sang <oliver.sang@intel.com>
Acked-by: Peter Xu <peterx@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Vivek Kasireddy <vivek.kasireddy@intel.com>
Cc: <stable@vger.kernel.org> [6.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The name_assign_type indicates how the name is provided. Currently
these types are supported:
- RDMA_NAME_ASSIGN_TYPE_UNKNOWN: Unknown or not set;
- RDMA_NAME_ASSIGN_TYPE_USER: Name is provided by the user; The
user-created sub device, rxe and siw device has this type.
When filling nl device info, it is set in the new attribute
RDMA_NLDEV_ATTR_NAME_ASSIGN_TYPE. User-space tools like udev
"rdma_rename" could check this attribute to determine if this
device needs to be renamed or not.
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/522591bef9a369cc8e5dcb77787e017bffee37fe.1719837610.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
|
|
The index argument of page_cache_async_readahead() is just folio->index so
there's no point in passing is separately. Drop it.
Link: https://lkml.kernel.org/r/20240625101909.12234-5-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Tested-by: Zhang Peng <zhangpengpeng0808@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Currently we always take a folio reference even if migration will not even
be tried or isolation failed, requiring us to grab+drop an additional
reference.
Further, we end up calling folio_likely_mapped_shared() while the folio
might have already been unmapped, because after we dropped the PTL, that
can easily happen. We want to stop touching mapcounts and friends from
such context, and only call folio_likely_mapped_shared() while the folio
is still mapped: mapcount information is pretty much stale and unreliable
otherwise.
So let's move checks into numamigrate_isolate_folio(), rename that
function to migrate_misplaced_folio_prepare(), and call that function from
callsites where we call migrate_misplaced_folio(), but still with the PTL
held.
We can now stop taking temporary folio references, and really only take a
reference if folio isolation succeeded. Doing the
folio_likely_mapped_shared() + folio isolation under PT lock is now
similar to how we handle MADV_PAGEOUT.
While at it, combine the folio_is_file_lru() checks.
[david@redhat.com: fix list_del() corruption]
Link: https://lkml.kernel.org/r/8f85c31a-e603-4578-bf49-136dae0d4b69@redhat.com
Link: https://lkml.kernel.org/r/20240626191129.658CFC32782@smtp.kernel.org
Link: https://lkml.kernel.org/r/20240620212935.656243-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Tested-by: Donet Tom <donettom@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
KMSAN_WARN_ON() is required for implementing s390-specific KMSAN
functions, but right now it's available only to the KMSAN internal
functions. Expose it to subsystems through <linux/kmsan.h>.
Link: https://lkml.kernel.org/r/20240621113706.315500-17-iii@linux.ibm.com
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: <kasan-dev@googlegroups.com>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add a wrapper for memset() that prevents unpoisoning. This is useful for
filling memory allocator redzones.
Link: https://lkml.kernel.org/r/20240621113706.315500-13-iii@linux.ibm.com
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: <kasan-dev@googlegroups.com>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Like for KASAN, it's useful to temporarily disable KMSAN checks around,
e.g., redzone accesses. Introduce kmsan_disable_current() and
kmsan_enable_current(), which are similar to their KASAN counterparts.
Make them reentrant in order to handle memory allocations in interrupt
context. Repurpose the allow_reporting field for this.
Link: https://lkml.kernel.org/r/20240621113706.315500-12-iii@linux.ibm.com
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: <kasan-dev@googlegroups.com>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Each s390 CPU has lowcore pages associated with it. Each CPU sees its own
lowcore at virtual address 0 through a hardware mechanism called
prefixing. Additionally, all lowcores are mapped to non-0 virtual
addresses stored in the lowcore_ptr[] array.
When lowcore is accessed through virtual address 0, one needs to resolve
metadata for lowcore_ptr[raw_smp_processor_id()].
Expose kmsan_get_metadata() to make it possible to do this from the arch
code.
Link: https://lkml.kernel.org/r/20240621113706.315500-10-iii@linux.ibm.com
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Alexander Gordeev <agordeev@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@linux.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: <kasan-dev@googlegroups.com>
Cc: Marco Elver <elver@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
KCSAN complains about possible data races: while we check for a page_type
-- for example for sanity checks -- we might concurrently modify the
mapcount that overlays page_type.
Let's use READ_ONCE to avoid load tearing (shouldn't make a difference)
and to make KCSAN happy.
Likely, we might also want to use WRITE_ONCE for the writer side of
page_type, if KCSAN ever complains about that. But we'll not mess with
that for now.
Note: nothing should really be broken besides wrong KCSAN complaints. The
sanity check that triggers this was added in commit 68f0320824fa
("mm/rmap: convert folio_add_file_rmap_range() into
folio_add_file_rmap_[pte|ptes|pmd]()"). Even before that similar races
likely where possible, ever since we added page_type in commit
6e292b9be7f4 ("mm: split page_type out from _mapcount").
Link: https://lkml.kernel.org/r/20240531125616.2850153-1-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202405281431.c46a3be9-lkp@intel.com
Reviewed-by: Oscar Salvador <osalvador@suse.de>
Reviewed-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm: improve clear and copy user folio", v2.
Some folio conversions. An improvement is to move address alignment into
the caller as it is only needed if we don't know which address will be
accessed when clearing/copying user folios.
This patch (of 4):
Replace clear_huge_page() with folio_zero_user(), and take a folio
instead of a page. Directly get number of pages by folio_nr_pages()
to remove pages_per_huge_page argument, furthermore, move the address
alignment from folio_zero_user() to the callers since the alignment
is only needed when we don't know which address will be accessed.
Link: https://lkml.kernel.org/r/20240618091242.2140164-1-wangkefeng.wang@huawei.com
Link: https://lkml.kernel.org/r/20240618091242.2140164-2-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm: clarify folio_add_new_anon_rmap() and
__folio_add_anon_rmap()", v2.
This patchset is preparatory work for mTHP swapin.
folio_add_new_anon_rmap() assumes that new anon rmaps are always
exclusive. However, this assumption doesn’t hold true for cases like
do_swap_page(), where a new anon might be added to the swapcache and is
not necessarily exclusive.
The patchset extends the rmap flags to allow folio_add_new_anon_rmap() to
handle both exclusive and non-exclusive new anon folios. The
do_swap_page() function is updated to use this extended API with rmap
flags. Consequently, all new anon folios now consistently use
folio_add_new_anon_rmap(). The special case for !folio_test_anon() in
__folio_add_anon_rmap() can be safely removed.
In conclusion, new anon folios always use folio_add_new_anon_rmap(),
regardless of exclusivity. Old anon folios continue to use
__folio_add_anon_rmap() via folio_add_anon_rmap_pmd() and
folio_add_anon_rmap_ptes().
This patch (of 3):
In the case of a swap-in, a new anonymous folio is not necessarily
exclusive. This patch updates the rmap flags to allow a new anonymous
folio to be treated as either exclusive or non-exclusive. To maintain the
existing behavior, we always use EXCLUSIVE as the default setting.
[akpm@linux-foundation.org: cleanup and constifications per David and akpm]
[v-songbaohua@oppo.com: fix missing doc for flags of folio_add_new_anon_rmap()]
Link: https://lkml.kernel.org/r/20240619210641.62542-1-21cnbao@gmail.com
[v-songbaohua@oppo.com: enhance doc for extend rmap flags arguments for folio_add_new_anon_rmap]
Link: https://lkml.kernel.org/r/20240622030256.43775-1-21cnbao@gmail.com
Link: https://lkml.kernel.org/r/20240617231137.80726-1-21cnbao@gmail.com
Link: https://lkml.kernel.org/r/20240617231137.80726-2-21cnbao@gmail.com
Signed-off-by: Barry Song <v-songbaohua@oppo.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Tested-by: Shuai Yuan <yuanshuai@oppo.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Chris Li <chrisl@kernel.org>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: Yosry Ahmed <yosryahmed@google.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
when offlining
We currently have a hack for virtio-mem in place to handle memory
offlining with PageOffline pages for which we already adjusted the managed
page count.
Let's enlighten memory offlining code so we can get rid of that hack, and
document the situation.
Link: https://lkml.kernel.org/r/20240607090939.89524-4-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Oscar Salvador <osalvador@suse.de>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Eugenio Pérez <eperezma@redhat.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Marco Elver <elver@google.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
instead of PageReserved()
We currently initialize the memmap such that PG_reserved is set and the
refcount of the page is 1. In virtio-mem code, we have to manually clear
that PG_reserved flag to make memory offlining with partially hotplugged
memory blocks possible: has_unmovable_pages() would otherwise bail out on
such pages.
We want to avoid PG_reserved where possible and move to typed pages
instead. Further, we want to further enlighten memory offlining code
about PG_offline: offline pages in an online memory section. One example
is handling managed page count adjustments in a cleaner way during memory
offlining.
So let's initialize the pages with PG_offline instead of PG_reserved.
generic_online_page()->__free_pages_core() will now clear that flag before
handing that memory to the buddy.
Note that the page refcount is still 1 and would forbid offlining of such
memory except when special care is take during GOING_OFFLINE as currently
only implemented by virtio-mem.
With this change, we can now get non-PageReserved() pages in the XEN
balloon list. From what I can tell, that can already happen via
decrease_reservation(), so that should be fine.
HV-balloon should not really observe a change: partial online memory
blocks still cannot get surprise-offlined, because the refcount of these
PageOffline() pages is 1.
Update virtio-mem, HV-balloon and XEN-balloon code to be aware that
hotplugged pages are now PageOffline() instead of PageReserved() before
they are handed over to the buddy.
We'll leave the ZONE_DEVICE case alone for now.
Note that self-hosted vmemmap pages will no longer be marked as
reserved. This matches ordinary vmemmap pages allocated from the buddy
during memory hotplug. Now, really only vmemmap pages allocated from
memblock during early boot will be marked reserved. Existing
PageReserved() checks seem to be handling all relevant cases correctly
even after this change.
Link: https://lkml.kernel.org/r/20240607090939.89524-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Acked-by: Oscar Salvador <osalvador@suse.de> [generic memory-hotplug bits]
Cc: Alexander Potapenko <glider@google.com>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Eugenio Pérez <eperezma@redhat.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Marco Elver <elver@google.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Wei Liu <wei.liu@kernel.org>
Cc: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There are no more users of page_mkclean(), remove it and update the
document and comment.
Link: https://lkml.kernel.org/r/20240604114822.2089819-5-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Helge Deller <deller@gmx.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
After the last user of page_maybe_dma_pinned() is converted to
folio_maybe_dma_pinned(), remove page_maybe_dma_pinned() and update the
document and comment.
[wangkefeng.wang@huawei.com: fix pin_user_pages.rst underlining]
Link: https://lkml.kernel.org/r/61b256c7-4989-44ec-83db-f34a1bd4be2d@huawei.com
Link: https://lkml.kernel.org/r/20240604114822.2089819-3-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Helge Deller <deller@gmx.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Let's simply reinitialize the page->_mapcount directly. We can now get
rid of page_mapcount_reset().
Link: https://lkml.kernel.org/r/20240529111904.2069608-7-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Tested-by: Sergey Senozhatsky <senozhatsky@chromium.org> [zram/zsmalloc workloads]
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Let's clean it up: use a proper page type and store our data (offset into
a page) in the lower 16 bit as documented.
We won't be able to support 256 KiB base pages, which is acceptable.
Teach Kconfig to handle that cleanly using a new CONFIG_HAVE_ZSMALLOC.
Based on this, we should do a proper "struct zsdesc" conversion, as
proposed in [1].
This removes the last _mapcount/page_type offender.
[1] https://lore.kernel.org/all/20231130101242.2590384-1-42.hyeyoo@gmail.com/
Link: https://lkml.kernel.org/r/20240529111904.2069608-4-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Tested-by: Sergey Senozhatsky <senozhatsky@chromium.org> [zram/zsmalloc workloads]
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
As long as the owner sets a page type first, we can allow reuse of the
lower 16 bit: sufficient to store an offset into a 64 KiB page, which is
the maximum base page size in *common* configurations (ignoring the 256
KiB variant). Restrict it to the head page.
We'll use that for zsmalloc next, to set a proper type while still reusing
that field to store information (offset into a base page) that cannot go
elsewhere for now.
Let's reserve the lower 16 bit for that purpose and for catching mapcount
underflows, and let's reduce PAGE_TYPE_BASE to a single bit.
Note that we will still have to overflow the mapcount quite a lot until we
would actually indicate a valid page type.
Start handing out the type bits from highest to lowest, to make it clearer
how many bits for types we have left. Out of 15 bit we can use for types,
we currently use 6. If we run out of bits before we have better typing
(e.g., memdesc), we can always investigate storing a value instead [1].
[1] https://lore.kernel.org/all/00ba1dff-7c05-46e8-b0d9-a78ac1cfc198@redhat.com/
[akpm@linux-foundation.org: fix PG_hugetlb typo, per David]
Link: https://lkml.kernel.org/r/20240529111904.2069608-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Tested-by: Sergey Senozhatsky <senozhatsky@chromium.org> [zram/zsmalloc workloads]
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm: page_type, zsmalloc and page_mapcount_reset()", v2.
Wanting to remove the remaining abuser of _mapcount/page_type along with
page_mapcount_reset(), I stumbled over zsmalloc, which is yet to be
converted away from "struct page" [1].
Unfortunately, we cannot stop using the page_type field in zsmalloc code
completely for its own purposes. All other fields in "struct page" are
used one way or the other. Could we simply store a 2-byte offset value at
the beginning of each page? Likely, but that will require a bit more
work; and once we have memdesc we might want to move the offset in there
(struct zsalloc?) again.
... but we can limit the abuse to 16 bit, glue it to a page type that
must be set, and document it. page_has_type() will always successfully
indicate such zsmalloc pages, and such zsmalloc pages only.
We lose zsmalloc support for PAGE_SIZE > 64KB, which should be tolerable.
We could use more bits from the page type, but 16 bit sounds like a good
idea for now.
So clarify the _mapcount/page_type documentation, use a proper page_type
for zsmalloc, and remove page_mapcount_reset().
[1] https://lore.kernel.org/all/20231130101242.2590384-1-42.hyeyoo@gmail.com/
This patch (of 6):
Let's make it clearer that _mapcount must no longer be used for own
purposes, and how _mapcount and page_type behaves nowadays (also in the
context of hugetlb folios, which are typed folios that will be mapped to
user space).
Move the documentation regarding "-1" over from page_mapcount_reset(),
which we will remove next. Move "page_type" before "mapcount", to make it
clearer what typed folios are.
Link: https://lkml.kernel.org/r/20240529111904.2069608-1-david@redhat.com
Link: https://lkml.kernel.org/r/20240529111904.2069608-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Tested-by: Sergey Senozhatsky <senozhatsky@chromium.org> [zram/zsmalloc workloads]
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Implement functions for supporting online DAMON context level parameters
update. The function receives two DAMON context structs. One is the
struct that currently being used by a kdamond and therefore to be updated.
The other one contains the parameters to be applied to the first one.
The function applies the new parameters to the destination struct while
keeping/updating the internal status and operation results. The function
should be called from DAMON context-update-safe place, like DAMON
callbacks.
Link: https://lkml.kernel.org/r/20240618181809.82078-3-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm/damon: introduce DAMON parameters online commit function".
DAMON context struct (damon_ctx) contains user requests (parameters),
internal status, and operation results. For flexible usages, DAMON API
users are encouraged to manually manipulate the struct. That works well
for simple use cases. However, it has turned out that it is not that
simple at least for online parameters udpate. It is easy to forget
properly maintaining internal status and operation results. Also, such
manual manipulation for online tuning is implemented multiple times on
DAMON API users including DAMON sysfs interface, DAMON_RECLAIM and
DAMON_LRU_SORT. As a result, we have multiple sources of bugs for same
problem. Actually we found and fixed a few bugs from online parameter
updating of DAMON API users.
Implement a function for online DAMON parameters update in core layer, and
replace DAMON API users' manual manipulation code for the use case. The
core layer function could still have bugs, but this change reduces the
source of bugs for the problem to one place.
This patch (of 12):
Implement functions for supporting online DAMOS quota goals parameters
update. The function receives two DAMOS quota structs. One is the struct
that currently being used by a kdamond and therefore to be updated. The
other one contains the parameters to be applied to the first one. The
function applies the new parameters to the destination struct while
keeping/updating the internal status. The function should be called from
parameters-update safe place, like DAMON callbacks.
Link: https://lkml.kernel.org/r/20240618181809.82078-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20240618181809.82078-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This patch introduces DAMOS_MIGRATE_HOT action, which is similar to
DAMOS_MIGRATE_COLD, but proritizes hot pages.
It migrates pages inside the given region to the 'target_nid' NUMA node
in the sysfs.
Here is one of the example usage of this 'migrate_hot' action.
$ cd /sys/kernel/mm/damon/admin/kdamonds/<N>
$ cat contexts/<N>/schemes/<N>/action
migrate_hot
$ echo 0 > contexts/<N>/schemes/<N>/target_nid
$ echo commit > state
$ numactl -p 2 ./hot_cold 500M 600M &
$ numastat -c -p hot_cold
Per-node process memory usage (in MBs)
PID Node 0 Node 1 Node 2 Total
-------------- ------ ------ ------ -----
701 (hot_cold) 501 0 601 1101
Link: https://lkml.kernel.org/r/20240614030010.751-7-honggyu.kim@sk.com
Signed-off-by: Hyeongtak Ji <hyeongtak.ji@sk.com>
Signed-off-by: Honggyu Kim <honggyu.kim@sk.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Gregory Price <gregory.price@memverge.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This patch introduces DAMOS_MIGRATE_COLD action, which is similar to
DAMOS_PAGEOUT, but migrate folios to the given 'target_nid' in the sysfs
instead of swapping them out.
The 'target_nid' sysfs knob informs the migration target node ID.
Here is one of the example usage of this 'migrate_cold' action.
$ cd /sys/kernel/mm/damon/admin/kdamonds/<N>
$ cat contexts/<N>/schemes/<N>/action
migrate_cold
$ echo 2 > contexts/<N>/schemes/<N>/target_nid
$ echo commit > state
$ numactl -p 0 ./hot_cold 500M 600M &
$ numastat -c -p hot_cold
Per-node process memory usage (in MBs)
PID Node 0 Node 1 Node 2 Total
-------------- ------ ------ ------ -----
701 (hot_cold) 501 0 601 1101
Since there are some common routines with pageout, many functions have
similar logics between pageout and migrate cold.
damon_pa_migrate_folio_list() is a minimized version of
shrink_folio_list().
Link: https://lkml.kernel.org/r/20240614030010.751-6-honggyu.kim@sk.com
Signed-off-by: Honggyu Kim <honggyu.kim@sk.com>
Signed-off-by: Hyeongtak Ji <hyeongtak.ji@sk.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Gregory Price <gregory.price@memverge.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The current patch series introduces DAMON based migration across NUMA
nodes so it'd be better to have a new migrate_reason in trace events.
Link: https://lkml.kernel.org/r/20240614030010.751-5-honggyu.kim@sk.com
Signed-off-by: Honggyu Kim <honggyu.kim@sk.com>
Reviewed-by: SeongJae Park <sj@kernel.org>
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Gregory Price <gregory.price@memverge.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Hyeongtak Ji <hyeongtak.ji@sk.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This patch adds target_nid under
/sys/kernel/mm/damon/admin/kdamonds/<N>/contexts/<N>/schemes/<N>/
The 'target_nid' can be used as the destination node for DAMOS actions
such as DAMOS_MIGRATE_{HOT,COLD} in the follow up patches.
[sj@kernel.org: document target_nid file]
Link: https://lkml.kernel.org/r/20240618213630.84846-3-sj@kernel.org
Link: https://lkml.kernel.org/r/20240614030010.751-4-honggyu.kim@sk.com
Signed-off-by: Hyeongtak Ji <hyeongtak.ji@sk.com>
Signed-off-by: Honggyu Kim <honggyu.kim@sk.com>
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Gregory Price <gregory.price@memverge.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There are some functions only used inside mm. Move them into internal.h.
No functional change intended.
Link: https://lkml.kernel.org/r/20240612071835.157004-11-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202405251049.hxjwX7zO-lkp@intel.com/
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Since commit 46df8e73a4a3 ("mm: free up PG_slab"), MF_MSG_SLAB becomes
unused. Remove it. No functional change intended.
Link: https://lkml.kernel.org/r/20240612071835.157004-3-linmiaohe@huawei.com
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: Tony Luck <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
The previous patch has already reconstructed the cftype attributes based
on the templates and saved them in dfl_cftypes and legacy_cftypes. then
remove the old procedure and switch to the new cftypes.
Link: https://lkml.kernel.org/r/20240612092409.2027592-4-xiujianfeng@huawei.com
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Unlike other cgroup subsystems, the hugetlb cgroup does not provide a
static array of cftype that explicitly displays the properties, handling
functions, etc., of each file. Instead, it dynamically creates the
attribute of cftypes based on the hstate during the startup procedure.
This reduces the readability of the code.
To fix this issue, introduce two templates of cftypes, and rebuild the
attributes according to the hstate to make it ready to be added to cgroup
framework.
Link: https://lkml.kernel.org/r/20240612092409.2027592-3-xiujianfeng@huawei.com
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: kernel test robot <oliver.sang@intel.com>
From: Xiu Jianfeng <xiujianfeng@huawei.com>
Subject: mm/hugetlb_cgroup: register lockdep key for cftype
Date: Tue, 18 Jun 2024 07:19:22 +0000
When CONFIG_DEBUG_LOCK_ALLOC is enabled, the following commands can
trigger a bug,
mount -t cgroup2 none /sys/fs/cgroup
cd /sys/fs/cgroup
echo "+hugetlb" > cgroup.subtree_control
The log is as below:
BUG: key ffff8880046d88d8 has not been registered!
------------[ cut here ]------------
DEBUG_LOCKS_WARN_ON(1)
WARNING: CPU: 3 PID: 226 at kernel/locking/lockdep.c:4945 lockdep_init_map_type+0x185/0x220
Modules linked in:
CPU: 3 PID: 226 Comm: bash Not tainted 6.10.0-rc4-next-20240617-g76db4c64526c #544
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
RIP: 0010:lockdep_init_map_type+0x185/0x220
Code: 00 85 c0 0f 84 6c ff ff ff 8b 3d 6a d1 85 01 85 ff 0f 85 5e ff ff ff 48 c7 c6 21 99 4a 82 48 c7 c7 60 29 49 82 e8 3b 2e f5
RSP: 0018:ffffc9000083fc30 EFLAGS: 00000282
RAX: 0000000000000000 RBX: ffffffff828dd820 RCX: 0000000000000027
RDX: ffff88803cd9cac8 RSI: 0000000000000001 RDI: ffff88803cd9cac0
RBP: ffff88800674fbb0 R08: ffffffff828ce248 R09: 00000000ffffefff
R10: ffffffff8285e260 R11: ffffffff828b8eb8 R12: ffff8880046d88d8
R13: 0000000000000000 R14: 0000000000000000 R15: ffff8880067281c0
FS: 00007f68601ea740(0000) GS:ffff88803cd80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005614f3ebc740 CR3: 000000000773a000 CR4: 00000000000006f0
Call Trace:
<TASK>
? __warn+0x77/0xd0
? lockdep_init_map_type+0x185/0x220
? report_bug+0x189/0x1a0
? handle_bug+0x3c/0x70
? exc_invalid_op+0x18/0x70
? asm_exc_invalid_op+0x1a/0x20
? lockdep_init_map_type+0x185/0x220
__kernfs_create_file+0x79/0x100
cgroup_addrm_files+0x163/0x380
? find_held_lock+0x2b/0x80
? find_held_lock+0x2b/0x80
? find_held_lock+0x2b/0x80
css_populate_dir+0x73/0x180
cgroup_apply_control_enable+0x12f/0x3a0
cgroup_subtree_control_write+0x30b/0x440
kernfs_fop_write_iter+0x13a/0x1f0
vfs_write+0x341/0x450
ksys_write+0x64/0xe0
do_syscall_64+0x4b/0x110
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f68602d9833
Code: 8b 15 61 26 0e 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 64 8b 04 25 18 00 00 00 85 c0 75 14 b8 01 00 00 00 08
RSP: 002b:00007fff9bbdf8e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000009 RCX: 00007f68602d9833
RDX: 0000000000000009 RSI: 00005614f3ebc740 RDI: 0000000000000001
RBP: 00005614f3ebc740 R08: 000000000000000a R09: 0000000000000008
R10: 00005614f3db6ba0 R11: 0000000000000246 R12: 0000000000000009
R13: 00007f68603bd6a0 R14: 0000000000000009 R15: 00007f68603b8880
For lockdep, there is a sanity check in lockdep_init_map_type(), the
lock-class key must either have been allocated statically or must
have been registered as a dynamic key. However the commit e18df2889ff9
("mm/hugetlb_cgroup: prepare cftypes based on template") has changed
the cftypes from static allocated objects to dynamic allocated objects,
so the cft->lockdep_key must be registered proactively.
[xiujianfeng@huawei.com: fix BUG()]
Link: https://lkml.kernel.org/r/20240619015527.2212698-1-xiujianfeng@huawei.com
Link: https://lkml.kernel.org/r/20240618071922.2127289-1-xiujianfeng@huawei.com
Link: https://lore.kernel.org/all/602186b3-5ce3-41b3-90a3-134792cc2a48@samsung.com/
Fixes: e18df2889ff9 ("mm/hugetlb_cgroup: prepare cftypes based on template")
Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202406181046.8d8b2492-oliver.sang@intel.com
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: SeongJae Park <sj@kernel.org>
Closes: https://lore.kernel.org/20240618233608.400367-1-sj@kernel.org
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Today, we do not have any observability of per-page metadata and how much
it takes away from the machine capacity. Thus, we want to describe the
amount of memory that is going towards per-page metadata, which can vary
depending on build configuration, machine architecture, and system use.
This patch adds 2 fields to /proc/vmstat that can used as shown below:
Accounting per-page metadata allocated by boot-allocator:
/proc/vmstat:nr_memmap_boot * PAGE_SIZE
Accounting per-page metadata allocated by buddy-allocator:
/proc/vmstat:nr_memmap * PAGE_SIZE
Accounting total Perpage metadata allocated on the machine:
(/proc/vmstat:nr_memmap_boot +
/proc/vmstat:nr_memmap) * PAGE_SIZE
Utility for userspace:
Observability: Describe the amount of memory overhead that is going to
per-page metadata on the system at any given time since this overhead is
not currently observable.
Debugging: Tracking the changes or absolute value in struct pages can help
detect anomalies as they can be correlated with other metrics in the
machine (e.g., memtotal, number of huge pages, etc).
page_ext overheads: Some kernel features such as page_owner
page_table_check that use page_ext can be optionally enabled via kernel
parameters. Having the total per-page metadata information helps users
precisely measure impact. Furthermore, page-metadata metrics will reflect
the amount of struct pages reliquished (or overhead reduced) when
hugetlbfs pages are reserved which will vary depending on whether hugetlb
vmemmap optimization is enabled or not.
For background and results see:
lore.kernel.org/all/20240220214558.3377482-1-souravpanda@google.com
Link: https://lkml.kernel.org/r/20240605222751.1406125-1-souravpanda@google.com
Signed-off-by: Sourav Panda <souravpanda@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Chen Linxuan <chenlinxuan@uniontech.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ivan Babrou <ivan@cloudflare.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tomas Mudrunka <tomas.mudrunka@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Wei Xu <weixugc@google.com>
Cc: Yang Yang <yang.yang29@zte.com.cn>
Cc: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
