summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2017-02-07net: dsa: Add support for platform dataFlorian Fainelli
Allow drivers to use the new DSA API with platform data. Most of the code in net/dsa/dsa2.c does not rely so much on device_nodes and can get the same information from platform_data instead. We purposely do not support distributed configurations with platform data, so drivers should be providing a pointer to a 'struct dsa_chip_data' structure if they wish to communicate per-port layout. Multiple CPUs port could potentially be supported and dsa_chip_data is extended to receive up to one reference to an upstream network device per port described by a dsa_chip_data structure. dsa_dev_to_net_device() increments the network device's reference count, so we intentionally call dev_put() to be consistent with the DT-enabled path, until we have a generic notifier based solution. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-07net: dsa: Rename and export dev_to_net_device()Florian Fainelli
In preparation for using this function in net/dsa/dsa2.c, rename the function to make its scope DSA specific, and export it. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-07net: phy: Add 2000base-x, 2500base-x and rxaui modesAndrew Lunn
The mv88e6390 ports 9 and 10 supports some additional PHY modes. Add these modes to the PHY core so they can be used in the binding. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-07virtio_net: refactor freeze/restore logic into virtnet reset logicJohn Fastabend
For XDP we will need to reset the queues to allow for buffer headroom to be configured. In order to do this we need to essentially run the freeze()/restore() code path. Unfortunately the locking requirements between the freeze/restore and reset paths are different however so we can not simply reuse the code. This patch refactors the code path and adds a reset helper routine. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-07Merge tag 'stm32-dt-for-v4.11-2' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into next/dt Pull "STM32 DT updates for v4.11, round 2" from Alexandre Torgue: Highlights: ---------- - ADD Timers support on STM32F429 MCU - Enable PWM1 & PWM3 on STM32F469 Disco board - Fix STM32F4_X_CLOCK macro - Use STM32F4_X_CLOCK macro in STM32 device tree - Add I2C1 support for STM32F429 MCU - Enable I2C1 on STM32F429 eval board * tag 'stm32-dt-for-v4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: ARM: dts: stm32: Add I2C1 support for STM32429 eval board ARM: dts: stm32: Add I2C1 support for STM32F429 SoC ARM: dts: stm32: Use clock DT binding definition on stm32f429 family dt-bindings: mfd: stm32f4: Add missing binding definition dt-bindings: mfd: stm32f4: Fix STM32F4_X_CLOCK() macro ARM: dts: stm32: Enable pwm1 and pwm3 for stm32f469-disco ARM: dts: stm32: add Timers driver for stm32f429 MCU
2017-02-07vfs: wrap write f_ops with file_{start,end}_write()Amir Goldstein
Before calling write f_ops, call file_start_write() instead of sb_start_write(). Replace {sb,file}_start_write() for {copy,clone}_file_range() and for fallocate(). Beyond correct semantics, this avoids freeze protection to sb when operating on special inodes, such as fallocate() on a blockdev. Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Amir Goldstein <amir73il@gmail.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-02-07vfs: create vfs helper vfs_tmpfile()Amir Goldstein
Factor out some common vfs bits from do_tmpfile() to be used by overlayfs for concurrent copy up. Signed-off-by: Amir Goldstein <amir73il@gmail.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2017-02-07xen/pvh: Bootstrap PVH guestBoris Ostrovsky
Start PVH guest at XEN_ELFNOTE_PHYS32_ENTRY address. Setup hypercall page, initialize boot_params, enable early page tables. Since this stub is executed before kernel entry point we cannot use variables in .bss which is cleared by kernel. We explicitly place variables that are initialized here into .data. While adjusting xen_hvm_init_shared_info() make it use cpuid_e?x() instead of cpuid() (wherever possible). Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Juergen Gross <jgross@suse.com>
2017-02-07xen/pvh: Import PVH-related Xen public interfacesBoris Ostrovsky
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Juergen Gross <jgross@suse.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2017-02-07xen/x86: Remove PVH supportBoris Ostrovsky
We are replacing existing PVH guests with new implementation. We are keeping xen_pvh_domain() macro (for now set to zero) because when we introduce new PVH implementation later in this series we will reuse current PVH-specific code (xen_pvh_gnttab_setup()), and that code is conditioned by 'if (xen_pvh_domain())'. (We will also need a noop xen_pvh_domain() for !CONFIG_XEN_PVH). Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Juergen Gross <jgross@suse.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2017-02-07x86/ACPI: keep x86_cpu_to_acpiid mapping valid on CPU hotplugVitaly Kuznetsov
We may or may not have all possible CPUs in MADT on boot but in any case we're overwriting x86_cpu_to_acpiid mapping with U32_MAX when acpi_register_lapic() is called again on the CPU hotplug path: acpi_processor_hotadd_init() -> acpi_map_cpu() -> acpi_register_lapic() As we have the required acpi_id information in acpi_processor_hotadd_init() propagate it to acpi_map_cpu() to always keep x86_cpu_to_acpiid mapping valid. Reported-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-07ACPI / bus: Introduce acpi_of_modalias() equiv of of_modalias_node()Dan O'Donovan
When using devicetree stuff like i2c_client.name or spi_device.modalias is initialized to the first DT compatible id with the vendor prefix stripped. Since some drivers rely on this try to replicate it when using ACPI with DT ids. Signed-off-by: Dan O'Donovan <dan@emutex.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-07device property: export code duplicating array of property entriesDmitry Torokhov
When augmenting ACPI-enumerated devices with additional property data based on DMI info, a module has often several potential property sets, with only one being active on a given box. In order to save memory it should be possible to mark everything and __initdata or __initconst, execute DMI match early, and duplicate relevant properties. Then kernel will discard the rest of them. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-07device property: constify property arrays valuesDmitry Torokhov
Data that is fed into property arrays should not be modified, so let's mark relevant pointers as const. This will allow us making source arrays as const/__initconst. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-07device property: allow to constify propertiesDmitry Torokhov
There is no reason why statically defined properties should be modifiable, so let's make device_add_properties() and the rest of pset_*() functions to take const pointers to properties. This will allow us to mark properties as const/__initconst at definition sites. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-02-07delayacct: Include <uapi/linux/taskstats.h>Ingo Molnar
include/linux/delayacct.h relies on 'struct taskstats' but does not include the header that defines it. This worked so far because files that included <linux/taskstats.h> also happened to include other headers that included uapi/linux/taskstats.h. Fix it. Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-07efi: Get and store the secure boot statusDavid Howells
Get the firmware's secure-boot status in the kernel boot wrapper and stash it somewhere that the main kernel image can find. The efi_get_secureboot() function is extracted from the ARM stub and (a) generalised so that it can be called from x86 and (b) made to use efi_call_runtime() so that it can be run in mixed-mode. For x86, it is stored in boot_params and can be overridden by the boot loader or kexec. This allows secure-boot mode to be passed on to a new kernel. Suggested-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/1486380166-31868-5-git-send-email-ard.biesheuvel@linaro.org [ Small readability edits. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-07efi: Add SHIM and image security database GUID definitionsJosh Boyer
Add the definitions for shim and image security database, both of which are used widely in various Linux distros. Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matt Fleming <matt@codeblueprint.co.uk> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-efi@vger.kernel.org Link: http://lkml.kernel.org/r/1486380166-31868-4-git-send-email-ard.biesheuvel@linaro.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-07Merge branch 'for-linus' into for-nextTakashi Iwai
2017-02-07Merge tag 'v4.10-rc7' into efi/core, to pick up fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-07drm/exynos/decon5433: signal vblank only on odd fieldsAndrzej Hajda
In case of interlace mode irq is generated for odd and even fields, but vblank should be signaled only for the last emitted field. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-02-07drm/exynos/decon5433: add support for interlace modesAndrzej Hajda
Some registers should be programmed differently in interlace mode. Additionally IP does not signal stop state properly in interlaced mode, so warning has been removed. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2017-02-06fscrypt: split supp and notsupp declarations into their own headersEric Biggers
Previously, each filesystem configured without encryption support would define all the public fscrypt functions to their notsupp_* stubs. This list of #defines had to be updated in every filesystem whenever a change was made to the public fscrypt functions. To make things more maintainable now that we have three filesystems using fscrypt, split the old header fscrypto.h into several new headers. fscrypt_supp.h contains the real declarations and is included by filesystems when configured with encryption support, whereas fscrypt_notsupp.h contains the inline stubs and is included by filesystems when configured without encryption support. fscrypt_common.h contains common declarations needed by both. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2017-02-06Fix SED-OPAL UAPI structs to prevent 32/64 bit size differences.Scott Bauer
This patch is a quick fixup of the user structures that will prevent the structures from being different sizes on 32 and 64 bit archs. Taking this fix will allow us to *NOT* have to do compat ioctls for the sed code. Signed-off-by: Scott Bauer <scott.bauer@intel.com> Fixes: 19641f2d7674 ("Include: Uapi: Add user ABI for Sed/Opal") Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-06scsi: remove tsk_mgmt_response and it_nexus_response transport methodsChristoph Hellwig
They are never called and just dispatch to methods of the same names in the FC and SRP transport classes that are never implemented. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-06scsi: remove eh_timed_out methods in the transport templateChristoph Hellwig
Instead define the timeout behavior purely based on the host_template eh_timed_out method and wire up the existing transport implementations in the host templates. This also clears up the confusion that the transport template method overrides the host template one, so some drivers have to re-override the transport template one. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2017-02-06modules: mark __inittest/__exittest as __maybe_unusedArnd Bergmann
clang warns about unused inline functions by default: arch/arm/crypto/aes-cipher-glue.c:68:1: warning: unused function '__inittest' [-Wunused-function] arch/arm/crypto/aes-cipher-glue.c:69:1: warning: unused function '__exittest' [-Wunused-function] As these appear in every single module, let's just disable the warnings by marking the two functions as __maybe_unused. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Jessica Yu <jeyu@redhat.com>
2017-02-06net: dsa: introduce bridge notifierVivien Didelot
A slave device will now notify the switch fabric once its port is bridged or unbridged, instead of calling directly its switch operations. This code allows propagating cross-chip bridging events in the fabric. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-06net: dsa: add switch notifierVivien Didelot
Add a notifier block per DSA switch, registered against a notifier head in the switch fabric they belong to. This infrastructure will allow to propagate fabric-wide events such as port bridging, VLAN configuration, etc. If a DSA switch driver cares about cross-chip configuration, such events can be caught. Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-06rpmsg: qcom: smd: Return positively when not enabledBjorn Andersson
Remoteproc treats the error codes returned from the stubbed SMD API as errors, but the fact that SMD is not enabled should not affect remoteproc's ability to start the remote processors. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-02-06net-next: treewide use is_vlan_dev() helper function.Parav Pandit
This patch makes use of is_vlan_dev() function instead of flag comparison which is exactly done by is_vlan_dev() helper function. Signed-off-by: Parav Pandit <parav@mellanox.com> Reviewed-by: Daniel Jurgens <danielj@mellanox.com> Acked-by: Stephen Hemminger <stephen@networkplumber.org> Acked-by: Jon Maxwell <jmaxwell37@gmail.com> Acked-by: Johannes Thumshirn <jth@kernel.org> Acked-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-06PM / core / docs: Convert sleep states API document to reSTRafael J. Wysocki
Move the document describing the system sleep state transitions API for devices to Documentation/driver-api/pm/, convert it to reST and update it to use current terminology. Also remove the remaining reference to the old version of it from pm.h. The new document still contains references to some documents in the .txt format that will be converted later. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-02-06PM / core: Update kerneldoc comments in pm.hRafael J. Wysocki
Refresh the struct dev_pm_ops kerneldoc comment, so that it looks better and is more readable after processing by Sphinx, and drop the kerneldoc marker from a few other comments ("PM_EVENT_ messages" and a couple of enum types declarations) which are not proper kerneldoc and generally confuse Sphinx. Also change the comment describing struct dev_pm_domain into a kerneldoc one. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-02-06ARCv2: IDU-intc: Use build registers for getting numbers of interruptsYuriy Kolerov
This enhancement is needed to allow masking all available common interrupts in IDU interrupt controller in boot time since the kernel can discover a number of them from the build register. Also now there is no need to specify in device tree a list of used core interrupts by IDU. E.g. before: idu_intc: idu-interrupt-controller { compatible = "snps,archs-idu-intc"; interrupt-controller; interrupt-parent = <&core_intc>; #interrupt-cells = <2>; interrupts = <24 25 26 27 28 29 30 31>; }; and after: idu_intc: idu-interrupt-controller { compatible = "snps,archs-idu-intc"; interrupt-controller; interrupt-parent = <&core_intc>; #interrupt-cells = <2>; }; Signed-off-by: Yuriy Kolerov <yuriy.kolerov@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-02-06remoteproc: Move qcom_mdt_loader into drivers/soc/qcomBjorn Andersson
With the remoteproc parts cleaned out of the MDT loader we can move it to drivers/soc/qcom. Acked-by: Andy Gross <andy.gross@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2017-02-06block: Add Sed-opal libraryScott Bauer
This patch implements the necessary logic to bring an Opal enabled drive out of a factory-enabled into a working Opal state. This patch set also enables logic to save a password to be replayed during a resume from suspend. Signed-off-by: Scott Bauer <scott.bauer@intel.com> Signed-off-by: Rafael Antognolli <Rafael.Antognolli@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-06Include: Uapi: Add user ABI for Sed/OpalScott Bauer
Signed-off-by: Scott Bauer <scott.bauer@intel.com> Signed-off-by: Rafael Antognolli <Rafael.Antognolli@intel.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2017-02-06net: remove ndo_neigh_{construct, destroy} from stacked devicesIdo Schimmel
In commit 18bfb924f000 ("net: introduce default neigh_construct/destroy ndo calls for L2 upper devices") we added these ndos to stacked devices such as team and bond, so that calls will be propagated to mlxsw. However, previous commit removed the reliance on these ndos and no new users of these ndos have appeared since above mentioned commit. We can therefore safely remove this dead code. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2017-02-06net/mlx5: TX WQE updateSaeed Mahameed
Add new TX WQE fields for Connect-X5 vlan insertion support, type and vlan_tci, when type = MLX5_ETH_WQE_INSERT_VLAN the HW will insert the vlan and prio fields (vlan_tci) to the packet. Those bits and the inline header fields are mutually exclusive, and valid only when: MLX5_CAP_ETH(mdev, wqe_inline_mode) == MLX5_CAP_INLINE_MODE_NOT_REQUIRED and MLX5_CAP_ETH(mdev, wqe_vlan_insert), who will be set in ConnectX-5 and later HW generations. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
2017-02-06net/mlx5: Configure cache line size for start and end paddingDaniel Jurgens
There is a hardware feature that will pad the start or end of a DMA to be cache line aligned to avoid RMWs on the last cache line. The default cache line size setting for this feature is 64B. This change configures the hardware to use 128B alignment on systems with 128B cache lines. In addition we lower bound MPWRQ stride by HCA cacheline in mlx5e, MPWRQ stride should be at least the HCA cacheline, the current default is 64B and in case HCA_CAP.cach_line_128byte capability is set, MPWRQ RX stride will automatically be aligned to 128B. Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-02-06can: rx-offload: Add support for timestamp based irq offloadingMarc Kleine-Budde
Some CAN controllers don't implement a FIFO in hardware, but fill their mailboxes in a particular order (from lowest to highest or highest to lowest). This makes problems to read the frames in the correct order from the hardware, as new frames might be filled into just read (low) mailboxes. This gets worse, when following new frames are received into not read (higher) mailboxes. On the bright side some these CAN controllers put a timestamp on each received CAN frame. This patch adds support to offload CAN frames in interrupt context, order them by timestamp and then transmitted in a NAPI context. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-02-06can: rx-offload: Add support for HW fifo based irq offloadingDavid Jander
Some CAN controllers have a usable FIFO already but can still benefit from off-loading the CAN controller FIFO. The CAN frames of the FIFO are read and put into a skb queue during interrupt and then transmitted in a NAPI context. Signed-off-by: David Jander <david@protonic.nl> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2017-02-06iommu/dma: Remove bogus dma_supported() implementationRobin Murphy
Back when this was first written, dma_supported() was somewhat of a murky mess, with subtly different interpretations being relied upon in various places. The "does device X support DMA to address range Y?" uses assuming Y to be physical addresses, which motivated the current iommu_dma_supported() implementation and are alluded to in the comment therein, have since been cleaned up, leaving only the far less ambiguous "can device X drive address bits Y" usage internal to DMA API mask setting. As such, there is no reason to keep a slightly misleading callback which does nothing but duplicate the current default behaviour; we already constrain IOVA allocations to the iommu_domain aperture where necessary, so let's leave DMA mask business to architecture-specific code where it belongs. Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-02-06netfilter: ctnetlink: Fix regression in CTA_STATUS processingKevin Cernekee
The libnetfilter_conntrack userland library always sets IPS_CONFIRMED when building a CTA_STATUS attribute. If this toggles the bit from 0->1, the parser will return an error. On Linux 4.4+ this will cause any NFQA_EXP attribute in the packet to be ignored. This breaks conntrackd's userland helpers because they operate on unconfirmed connections. Instead of returning -EBUSY if the user program asks to modify an unchangeable bit, simply ignore the change. Also, fix the logic so that user programs are allowed to clear the bits that they are allowed to change. Signed-off-by: Kevin Cernekee <cernekee@chromium.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-02-06mtd: nand: Add Winbond manufacturer idAndrey Jr. Melnikov
Add WINBOND manufacturer id. Signed-off-by: Andrey Jr. Melnikov <temnota.am@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2017-02-06Merge branch 'perf/urgent' into perf/core, to pick up fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-02-06net/mlx5: Fix static checker warningsOr Gerlitz
For some reason, sparse doesn't like using an expression of type (!x) with a bitwise | and &. In order to mitigate that, we use a local variable. This removes the following sparse complaints on the core driver (and similar ones on the IB driver too): drivers/net/ethernet/mellanox/mlx5/core/srq.c:83:9: warning: dubious: !x & y drivers/net/ethernet/mellanox/mlx5/core/srq.c:96:9: warning: dubious: !x & y drivers/net/ethernet/mellanox/mlx5/core/port.c:59:9: warning: dubious: !x & y drivers/net/ethernet/mellanox/mlx5/core/vport.c:561:9: warning: dubious: !x & y Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Matan Barak <matanb@mellanox.com> Reported-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
2017-02-06Merge 4.10-rc7 into char-misc-nextGreg Kroah-Hartman
We want the hv and other fixes in here as well to handle merge and testing issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-06include: dt-bindings: Add STM32H7 pinctrl DT definesAlexandre TORGUE
Adds common pinctrl device tree defines for STM32H743 and STM32H753 MCU. Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-02-06Merge 4.10-rc7 into staging-nextGreg Kroah-Hartman
This resolves the merge errors that were reported in linux-next and it picks up the staging and IIO fixes that we need/want in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-09-18 00:31:59 +0000