| Age | Commit message (Collapse) | Author |
|---|
|
Coordinators may refuse associations. We need a user input for
that. Let's add a new netlink command which can provide a maximum number
of devices we accept to associate with as a first step. Later, we could
also forward the request to userspace and check whether the association
should be accepted or not.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/linux-wpan/20230927181214.129346-9-miquel.raynal@bootlin.com
|
|
Coordinators may have to handle association requests from peers which
want to join the PAN. The logic involves:
- Acknowledging the request (done by hardware)
- If requested, a random short address that is free on this PAN should
be chosen for the device.
- Sending an association response with the short address allocated for
the peer and expecting it to be ack'ed.
If anything fails during this procedure, the peer is considered not
associated.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/linux-wpan/20230927181214.129346-8-miquel.raynal@bootlin.com
|
|
A device may decide at some point to disassociate from a PAN, let's
introduce a netlink command for this purpose.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/linux-wpan/20230927181214.129346-6-miquel.raynal@bootlin.com
|
|
Joining a PAN officially goes by associating with a coordinator. This
coordinator may have been discovered thanks to the beacons it sent in
the past. Add support to the MAC layer for these associations, which
require:
- Sending an association request
- Receiving an association response
The association response contains the association status, eventually a
reason if the association was unsuccessful, and finally a short address
that we should use for intra-PAN communication from now on, if we
required one (which is the default, and not yet configurable).
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/linux-wpan/20230927181214.129346-5-miquel.raynal@bootlin.com
|
|
Users may decide to associate with a peer, which becomes our parent
coordinator. Let's add the necessary netlink support for this.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/linux-wpan/20230927181214.129346-4-miquel.raynal@bootlin.com
|
|
Introduce structures to describe peer devices in a PAN as well as a few
related helpers. We basically care about:
- Our unique parent after associating with a coordinator.
- Peer devices, children, which successfully associated with us.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Stefan Schmidt <stefan@datenfreihafen.org>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/linux-wpan/20230927181214.129346-3-miquel.raynal@bootlin.com
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for 6.8:
UAPI Changes:
- drm: Introduce CLOSE_FB ioctl
- drm/dp-mst: Documentation for the PATH property
- fdinfo: Do not align to a MB if the size is larger than 1MiB
- virtio-gpu: add explicit virtgpu context debug name
Cross-subsystem Changes:
- dma-buf: Add dma_fence_timestamp helper
Core Changes:
- client: Do not acquire module reference
- edid: split out drm_eld, add SAD helpers
- format-helper: Cache format conversion buffers
- sched: Move from a kthread to a workqueue, rename some internal
functions to make it clearer, implement dynamic job-flow control
- gpuvm: Provide more features to handle GEM objects
- tests: Remove slow kunit tests
Driver Changes:
- ivpu: Update FW API, new debugfs file, a new NOP job submission test
mode, improve suspend/resume, PM improvements, MMU PT optimizations,
firmware profiling frequency support, support for uncached buffers,
switch to gem shmem helpers, replace kthread with threaded
interrupts
- panfrost: PM improvements
- qaic: Allow to run with a single MSI, support host/device time
synchronization, misc improvements
- simplefb: Support memory-regions, support power-domains
- ssd130x: Unitialized variable fixes
- omapdrm: dma-fence lockdep annotation fix
- tidss: dma-fence lockdep annotation fix
- v3d: Support BCM2712 (RaspberryPi5), Support fdinfo and gputop
- panel:
- edp: Support AUO B116XTN02, BOE NT116WHM-N21,836X2, NV116WHM-N49
V8.0, plus a whole bunch of panels used on Mediatek chromebooks.
Note that the one missing s-o-b for 0da611a87021 ("dma-buf: add
dma_fence_timestamp helper") has been supplied here, and rebasing the
entire tree with upsetting committers didn't seem worth the trouble:
https://lore.kernel.org/dri-devel/ce94020e-a7d4-4799-b87d-fbea7b14a268@gmail.com/
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/y4awn5vcfy2lr2hpauo7rc4nfpnc6kksr7btmnwaz7zk63pwoi@gwwef5iqpzva
|
|
drm_{err,warn,...}() use __drm_printk() which takes a drm device pointer and
uses the embedded device pointer to print the device. This facility handles
NULL device pointer, but not NULL drm device pointer. This patch makes
__drm_printk() also handle a NULL drm device pointer. The printed output is
identical to if drm->dev had been NULL.
Signed-off-by: Luben Tuikov <ltuikov89@gmail.com>
Reviewed-by: Jani Nikula <jani.nikula@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231117035427.68125-2-ltuikov89@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix section mismatch warning messages for riscv and loongarch
- Remove CONFIG_IA64 left-over from linux/export-internal.h
- Fix the location of the quotes for UIMAGE_NAME
- Fix a memory leak bug in Kconfig
* tag 'kbuild-fixes-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: fix memory leak from range properties
kbuild: Move the single quotes for image name
linux/export: clean up the IA-64 KSYM_FUNC macro
modpost: fix section mismatch message for RELA
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Borislav Petkov:
- Do the push of pending hrtimers away from a CPU which is being
offlined earlier in the offlining process in order to prevent a
deadlock
* tag 'timers_urgent_for_v6.7_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
hrtimers: Push pending hrtimers away from outgoing CPU earlier
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fix from Borislav Petkov:
- Make sure the context refcount is transferred too when migrating perf
events
* tag 'perf_urgent_for_v6.7_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix cpuctx refcounting
|
|
if a PF has 256 or more VFs, ip link command will allocate an order 3
memory or more, and maybe trigger OOM due to memory fragment,
the VFs needed memory size is computed in rtnl_vfinfo_size.
so introduce nlmsg_new_large which calls netlink_alloc_large_skb in
which vmalloc is used for large memory, to avoid the failure of
allocating memory
ip invoked oom-killer: gfp_mask=0xc2cc0(GFP_KERNEL|__GFP_NOWARN|\
__GFP_COMP|__GFP_NOMEMALLOC), order=3, oom_score_adj=0
CPU: 74 PID: 204414 Comm: ip Kdump: loaded Tainted: P OE
Call Trace:
dump_stack+0x57/0x6a
dump_header+0x4a/0x210
oom_kill_process+0xe4/0x140
out_of_memory+0x3e8/0x790
__alloc_pages_slowpath.constprop.116+0x953/0xc50
__alloc_pages_nodemask+0x2af/0x310
kmalloc_large_node+0x38/0xf0
__kmalloc_node_track_caller+0x417/0x4d0
__kmalloc_reserve.isra.61+0x2e/0x80
__alloc_skb+0x82/0x1c0
rtnl_getlink+0x24f/0x370
rtnetlink_rcv_msg+0x12c/0x350
netlink_rcv_skb+0x50/0x100
netlink_unicast+0x1b2/0x280
netlink_sendmsg+0x355/0x4a0
sock_sendmsg+0x5b/0x60
____sys_sendmsg+0x1ea/0x250
___sys_sendmsg+0x88/0xd0
__sys_sendmsg+0x5e/0xa0
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f95a65a5b70
Cc: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Link: https://lore.kernel.org/r/20231115120108.3711-1-lirongqing@baidu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Revert following commits:
commit acec05fb78ab ("net_tstamp: Add TIMESTAMPING SOFTWARE and HARDWARE mask")
commit 11d55be06df0 ("net: ethtool: Add a command to expose current time stamping layer")
commit bb8645b00ced ("netlink: specs: Introduce new netlink command to get current timestamp")
commit d905f9c75329 ("net: ethtool: Add a command to list available time stamping layers")
commit aed5004ee7a0 ("netlink: specs: Introduce new netlink command to list available time stamping layers")
commit 51bdf3165f01 ("net: Replace hwtstamp_source by timestamping layer")
commit 0f7f463d4821 ("net: Change the API of PHY default timestamp to MAC")
commit 091fab122869 ("net: ethtool: ts: Update GET_TS to reply the current selected timestamp")
commit 152c75e1d002 ("net: ethtool: ts: Let the active time stamping layer be selectable")
commit ee60ea6be0d3 ("netlink: specs: Introduce time stamping set command")
They need more time for reviews.
Link: https://lore.kernel.org/all/20231118183529.6e67100c@kernel.org/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
no users left
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
there's a strange comment in front of d_lookup() declaration:
/* appendix may either be NULL or be used for transname suffixes */
Looks like nobody had been curious enough to track its history;
it predates git, it predates bitkeeper and if you look through
the pre-BK trees, you finally arrive at this in 2.1.44-for-davem:
/* appendix may either be NULL or be used for transname suffixes */
-extern struct dentry * d_lookup(struct inode * dir, struct qstr * name,
- struct qstr * appendix);
+extern struct dentry * d_lookup(struct dentry * dir, struct qstr * name);
In other words, it refers to the third argument d_lookup() used to have
back then. It had been introduced in 2.1.43-pre, on June 12 1997,
along with d_lookup(), only to be removed by July 4 1997, presumably
when the Cthulhu-awful thing it used to be used for (look for
CONFIG_TRANS_NAMES in 2.1.43-pre, and keep a heavy-duty barfbag
ready) had been, er, noticed and recognized for what it had been.
Despite the appendectomy, the comment remained. Some things really
need to be put out of their misery...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
d_instantiate_unique() had been gone for 7 years; __d_lookup...()
and shrink_dcache_for_umount() are fs/internal.h fodder.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Introduced in 2015 and never had any in-tree users...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
the last user gone in 2021...
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
For bits 20..22 (inode type cached in ->d_flags) turn the definitions into
expressions like (5 << 20); everything else turns into straight use of
BIT()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
This is beyond ridiculous. There is a reason why that thing is
cacheline-aligned...
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Move a good chunk of code from verifier.c to log.c: verifier state
verbose printing logic. This is an important and very much
logging/debugging oriented code. It fits the overlall log.c's focus on
verifier logging, and moving it allows to keep growing it without
unnecessarily adding to verifier.c code that otherwise contains a core
verification logic.
There are not many shared dependencies between this code and the rest of
verifier.c code, except a few single-line helpers for various register
type checks and a bit of state "scratching" helpers. We move all such
trivial helpers into include/bpf/bpf_verifier.h as static inlines.
No functional changes in this patch.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231118034623.3320920-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
verifier.c is huge. Let's try to move out parts that are logging-related
into log.c, as we previously did with bpf_log() and other related stuff.
This patch moves line info verbose output routines: it's pretty
self-contained and isolated code, so there is no problem with this.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231118034623.3320920-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
mlx5-updates-2023-11-13
1) Cleanup patches, leftovers from previous cycle
2) Allow sync reset flow when BF MGT interface device is present
3) Trivial ptp refactorings and improvements
4) Add local loopback counter to vport rep stats
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.open-mesh.org/linux-merge
This feature/cleanup patchset includes the following patches:
- bump version strings, by Simon Wunderlich
- Implement new multicast packet type, including its transmission,
forwarding and parsing, by Linus Lüssing (3 patches)
- Switch to new headers for sprintf and array size,
by Sven Eckelmann (2 patches)
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Now that the current timestamp is saved in a variable lets add the
ETHTOOL_MSG_TS_SET ethtool netlink socket to make it selectable.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Change the API to select MAC default time stamping instead of the PHY.
Indeed the PHY is closer to the wire therefore theoretically it has less
delay than the MAC timestamping but the reality is different. Due to lower
time stamping clock frequency, latency in the MDIO bus and no PHC hardware
synchronization between different PHY, the PHY PTP is often less precise
than the MAC. The exception is for PHY designed specially for PTP case but
these devices are not very widespread. For not breaking the compatibility I
introduce a default_timestamp flag in phy_device that is set by the phy
driver to know we are using the old API behavior.
The phy_set_timestamp function is called at each call of phy_attach_direct.
In case of MAC driver using phylink this function is called when the
interface is turned up. Then if the interface goes down and up again the
last choice of timestamp will be overwritten by the default choice.
A solution could be to cache the timestamp status but it can bring other
issues. In case of SFP, if we change the module, it doesn't make sense to
blindly re-set the timestamp back to PHY, if the new module has a PHY with
mediocre timestamping capabilities.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Replace hwtstamp_source which is only used by the kernel_hwtstamp_config
structure by the more widely use timestamp_layer structure. This is done
to prepare the support of selectable timestamping source.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Introduce a new netlink message that lists all available time stamping
layers on a given interface.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Time stamping on network packets may happen either in the MAC or in
the PHY, but not both. In preparation for making the choice
selectable, expose both the current layers via ethtool.
In accordance with the kernel implementation as it stands, the current
layer will always read as "phy" when a PHY time stamping device is
present. Future patches will allow changing the current layer
administratively.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Timestamping software or hardware flags are often used as a group,
therefore adding these masks will easier future use.
I did not use SOF_TIMESTAMPING_SYS_HARDWARE flag as it is deprecated and
not use at all.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Make the dev_set_hwtstamp_phylib function accessible in prevision to use
it from ethtool to reset the tstamp current configuration.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The vlan, macvlan and the bonding drivers call their "real" device driver
in order to report the time stamping capabilities. Provide a core
ethtool helper function to avoid copy/paste in the stack.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The PHYs hwtstamp callback are still getting the timestamp config from
ifreq and using copy_from/to_user.
Get rid of these functions by using timestamp configuration in parameter.
This also allow to move on to kernel_hwtstamp_config and be similar to
net devices using the new ndo_hwstamp_get/set.
This adds the possibility to manipulate the timestamp configuration
from the kernel which was not possible with the copy_from/to_user.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
wait_on_bit already does it.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20231104221117.2584708-1-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Ask block layer to block writes to block devices mounted by filesystems.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231101174325.10596-5-jack@suse.cz
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Writing to mounted devices is dangerous and can lead to filesystem
corruption as well as crashes. Furthermore syzbot comes with more and
more involved examples how to corrupt block device under a mounted
filesystem leading to kernel crashes and reports we can do nothing
about. Add tracking of writers to each block device and a kernel cmdline
argument which controls whether other writeable opens to block devices
open with BLK_OPEN_RESTRICT_WRITES flag are allowed. We will make
filesystems use this flag for used devices.
Note that this effectively only prevents modification of the particular
block device's page cache by other writers. The actual device content
can still be modified by other means - e.g. by issuing direct scsi
commands, by doing writes through devices lower in the storage stack
(e.g. in case loop devices, DM, or MD are involved) etc. But blocking
direct modifications of the block device page cache is enough to give
filesystems a chance to perform data validation when loading data from
the underlying storage and thus prevent kernel crashes.
Syzbot can use this cmdline argument option to avoid uninteresting
crashes. Also users whose userspace setup does not need writing to
mounted block devices can set this option for hardening.
Link: https://lore.kernel.org/all/60788e5d-5c7c-1142-e554-c21d709acfd9@linaro.org
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231101174325.10596-3-jack@suse.cz
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
blkdev_get_by_*() and blkdev_put() functions are now unused. Remove
them.
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20231101174325.10596-2-jack@suse.cz
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Before [1] freezing a filesystems through the block layer only worked
for the main block device as the owning superblock of additional block
devices could not be found. Any filesystem that made use of multiple
block devices would only be freezable via it's main block device.
For example, consider xfs over device mapper with /dev/dm-0 as main
block device and /dev/dm-1 as external log device. Two freeze requests
before [1]:
(1) dmsetup suspend /dev/dm-0 on the main block device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns 0.
(2) dmsetup suspend /dev/dm-1 on the log device
bdev_freeze(dm-1)
-> dm-1->bd_fsfreeze_count++
The owning superblock isn't found and only the block device freeze
count is incremented. Returns 0.
Two freeze requests after [1]:
(1') dmsetup suspend /dev/dm-0 on the main block device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns 0.
(2') dmsetup suspend /dev/dm-1 on the log device
bdev_freeze(dm-0)
-> dm-0->bd_fsfreeze_count++
-> freeze_super(xfs-sb)
The owning superblock is found and the filesystem gets frozen.
Returns -EBUSY.
When (2') is called we initiate a freeze from another block device of
the same superblock. So we increment the bd_fsfreeze_count for that
additional block device. But we now also find the owning superblock for
additional block devices and call freeze_super() again which reports
-EBUSY.
This can be reproduced through xfstests via:
mkfs.xfs -f -m crc=1,reflink=1,rmapbt=1, -i sparse=1 -lsize=1g,logdev=/dev/nvme1n1p4 /dev/nvme1n1p3
mkfs.xfs -f -m crc=1,reflink=1,rmapbt=1, -i sparse=1 -lsize=1g,logdev=/dev/nvme1n1p6 /dev/nvme1n1p5
FSTYP=xfs
export TEST_DEV=/dev/nvme1n1p3
export TEST_DIR=/mnt/test
export TEST_LOGDEV=/dev/nvme1n1p4
export SCRATCH_DEV=/dev/nvme1n1p5
export SCRATCH_MNT=/mnt/scratch
export SCRATCH_LOGDEV=/dev/nvme1n1p6
export USE_EXTERNAL=yes
sudo ./check generic/311
Current semantics allow two concurrent freezers: one initiated from
userspace via FREEZE_HOLDER_USERSPACE and one initiated from the kernel
via FREEZE_HOLDER_KERNEL. If there are multiple concurrent freeze
requests from either FREEZE_HOLDER_USERSPACE or FREEZE_HOLDER_KERNEL
-EBUSY is returned.
We need to preserve these semantics because as they are uapi via
FIFREEZE and FITHAW ioctl()s. IOW, freezes don't nest for FIFREEZE and
FITHAW. Other kernels consumers rely on non-nesting freezes as well.
With freezes initiated from the block layer freezes need to nest if the
same superblock is frozen via multiple devices. So we need to start
counting the number of freeze requests.
If FREEZE_MAY_NEST is passed alongside FREEZE_HOLDER_KERNEL or
FREEZE_HOLDER_USERSPACE we allow the caller to nest freeze calls.
To accommodate the old semantics we split the freeze counter into two
counting kernel initiated and userspace initiated freezes separately. We
can then also stop recording FREEZE_HOLDER_* in struct sb_writers.
We also simplify freezing by making all concurrent freezers share a
single active superblock reference count instead of having separate
references for kernel and userspace. I don't see why we would need two
active reference counts. Neither FREEZE_HOLDER_KERNEL nor
FREEZE_HOLDER_USERSPACE can put the active reference as long as they are
concurrent freezers anwyay. That was already true before we allowed
nesting freezes.
Survives various fstests runs with different options including the
reproducer, online scrub, and online repair, fsfreze, and so on. Also
survives blktests.
Link: https://lore.kernel.org/linux-block/87bkccnwxc.fsf@debian-BULLSEYE-live-builder-AMD64
Link: https://lore.kernel.org/r/20231104-vfs-multi-device-freeze-v2-2-5b5b69626eac@kernel.org
Fixes: 288d8706abfc ("bdev: implement freeze and thaw holder operations") [1] # no backport needed
Tested-by: Chandan Babu R <chandanbabu@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reported-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add a comment to @fs_holder_ops that @holder must point to a superblock.
Link: https://lore.kernel.org/r/20231024-vfs-super-freeze-v2-10-599c19f4faac@kernel.org
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Remove bd_fsfreeze_sb as it's now unused and can be removed. Also move
bd_fsfreeze_count down to not have it weirdly placed in the middle of
the holder fields.
Link: https://lore.kernel.org/r/20231024-vfs-super-freeze-v2-7-599c19f4faac@kernel.org
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Suggested-by: Jan Kara <jack@suse.cz>
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
This function is now unused so remove it. One less function that uses
the global superblock list.
Link: https://lore.kernel.org/r/20231024-vfs-super-freeze-v2-6-599c19f4faac@kernel.org
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The old method of implementing block device freeze and thaw operations
required us to rely on get_active_super() to walk the list of all
superblocks on the system to find any superblock that might use the
block device. This is wasteful and not very pleasant overall.
Now that we can finally go straight from block device to owning
superblock things become way simpler.
Link: https://lore.kernel.org/r/20231024-vfs-super-freeze-v2-5-599c19f4faac@kernel.org
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add block device freeze and thaw holder operations. Follow-up patches
will implement block device freeze and thaw based on stuct
blk_holder_ops.
Link: https://lore.kernel.org/r/20231024-vfs-super-freeze-v2-4-599c19f4faac@kernel.org
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
We have bdev_mark_dead() etc and we're going to move block device
freezing to holder ops in the next patch. Make the naming consistent:
* freeze_bdev() -> bdev_freeze()
* thaw_bdev() -> bdev_thaw()
Also document the return code.
Link: https://lore.kernel.org/r/20231024-vfs-super-freeze-v2-2-599c19f4faac@kernel.org
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When adding a mount to a namespace insert it into an rbtree rooted in the
mnt_namespace instead of a linear list.
The mnt.mnt_list is still used to set up the mount tree and for
propagation, but not after the mount has been added to a namespace. Hence
mnt_list can live in union with rb_node. Use MNT_ONRB mount flag to
validate that the mount is on the correct list.
This allows removing the cursor used for reading /proc/$PID/mountinfo. The
mnt_id_unique of the next mount can be used as an index into the seq file.
Tested by inserting 100k bind mounts, unsharing the mount namespace, and
unmounting. No performance regressions have been observed.
For the last mount in the 100k list the statmount() call was more than 100x
faster due to the mount ID lookup not having to do a linear search. This
patch makes the overhead of mount ID lookup non-observable in this range.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Link: https://lore.kernel.org/r/20231025140205.3586473-3-mszeredi@redhat.com
Reviewed-by: Ian Kent <raven@themaw.net>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
If a mount is released then its mnt_id can immediately be reused. This is
bad news for user interfaces that want to uniquely identify a mount.
Implementing a unique mount ID is trivial (use a 64bit counter).
Unfortunately userspace assumes 32bit size and would overflow after the
counter reaches 2^32.
Introduce a new 64bit ID alongside the old one. Initialize the counter to
2^32, this guarantees that the old and new IDs are never mixed up.
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Link: https://lore.kernel.org/r/20231025140205.3586473-2-mszeredi@redhat.com
Reviewed-by: Ian Kent <raven@themaw.net>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When vfs_getattr_nosec() calls a filesystem's getattr interface function
then the 'nosec' should propagate into this function so that
vfs_getattr_nosec() can again be called from the filesystem's gettattr
rather than vfs_getattr(). The latter would add unnecessary security
checks that the initial vfs_getattr_nosec() call wanted to avoid.
Therefore, introduce the getattr flag GETATTR_NOSEC and allow to pass
with the new getattr_flags parameter to the getattr interface function.
In overlayfs and ecryptfs use this flag to determine which one of the
two functions to call.
In a recent code change introduced to IMA vfs_getattr_nosec() ended up
calling vfs_getattr() in overlayfs, which in turn called
security_inode_getattr() on an exiting process that did not have
current->fs set anymore, which then caused a kernel NULL pointer
dereference. With this change the call to security_inode_getattr() can
be avoided, thus avoiding the NULL pointer dereference.
Reported-by: <syzbot+a67fc5321ffb4b311c98@syzkaller.appspotmail.com>
Fixes: db1d1e8b9867 ("IMA: use vfs_getattr_nosec to get the i_version")
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: <linux-fsdevel@vger.kernel.org>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Amir Goldstein <amir73il@gmail.com>
Cc: Tyler Hicks <code@tyhicks.com>
Cc: Mimi Zohar <zohar@linux.ibm.com>
Suggested-by: Christian Brauner <brauner@kernel.org>
Co-developed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Link: https://lore.kernel.org/r/20231002125733.1251467-1-stefanb@linux.vnet.ibm.com
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Rename verifier internal flag BPF_F_TEST_SANITY_STRICT to more neutral
BPF_F_TEST_REG_INVARIANTS. This is a follow up to [0].
A few selftests and veristat need to be adjusted in the same patch as
well.
[0] https://patchwork.kernel.org/project/netdevbpf/patch/20231112010609.848406-5-andrii@kernel.org/
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231117171404.225508-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The macro SUMMARY_SIZE represents the size of the struct f2fs_summary,
instead of the size of the struct summary.
Signed-off-by: Yang Hubin <yanghb2019@lzu.edu.cn>
Signed-off-by: Qian Haolai <qianhl2023@lzu.edu.cn>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Adds kernel client API function tee_client_system_session() for a client
to request a system service entry in TEE context.
This feature is needed to prevent a system deadlock when several TEE
client applications invoke TEE, consuming all TEE thread contexts
available in the secure world. The deadlock can happen in the OP-TEE
driver for example if all these TEE threads issue an RPC call from TEE
to Linux OS to access an eMMC RPMB partition (TEE secure storage) which
device clock or regulator controller is accessed through an OP-TEE SCMI
services. In that case, Linux SCMI driver must reach OP-TEE SCMI service
without waiting until one of the consumed TEE threads is freed.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Co-developed-by: Jens Wiklander <jens.wiklander@linaro.org>
Signed-off-by: Etienne Carriere <etienne.carriere@foss.st.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
