| Age | Commit message (Collapse) | Author |
|---|
|
RISC-V's implementation of init_of_cache_level() is following
the Devicetree Specification v0.3 regarding caches, cf.:
- s3.7.3 'Internal (L1) Cache Properties'
- s3.8 'Multi-level and Shared Cache Nodes'
Allow reusing the implementation by moving it.
Also make 'levels', 'leaves' and 'level' unsigned int.
Signed-off-by: Pierre Gondois <pierre.gondois@arm.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20230104183033.755668-2-pierre.gondois@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
|
|
Changes gpio.h DT binding header file to be published under GPLv2 or
BSD-2-Clause license terms. This change allows this GPIO generic
bindings header file to be used in software components as bootloaders
and OSes that are not published under GPLv2 terms.
All contributors to gpio.h file in copy.
Cc: Stephen Warren <swarren@nvidia.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Laxman Dewangan <ldewangan@nvidia.com>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Nuno Sá <nuno.sa@analog.com>
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Acked-by: Andrew Jeffery <andrew@aj.id.au>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220905145555.674800-1-etienne.carriere@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
There are no more users of software_node_register_nodes() and
software_node_unregister_nodes(). Remove them.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Daniel Scally <dan.scally@ideasonboard.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20221228094922.84119-5-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
struct platform_driver::remove returning an integer made driver authors
expect that returning an error code was proper error handling. However
the driver core ignores the error and continues to remove the device
because there is nothing the core could do anyhow and reentering the
remove callback again is only calling for trouble.
So this is an source for errors typically yielding resource leaks in the
error path.
As there are too many platform drivers to neatly convert them all to
return void in a single go, do it in several steps after this patch:
a) Convert all drivers to implement .remove_new() returning void instead
of .remove() returning int;
b) Change struct platform_driver::remove() to return void and so make
it identical to .remove_new();
c) Change all drivers back to .remove() now with the better prototype;
d) drop struct platform_driver::remove_new().
While this touches all drivers eventually twice, steps a) and c) can be
done one driver after another and so reduces coordination efforts
immensely and simplifies review.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20221209150914.3557650-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
group_cpus_evenly() has become a generic function which can be used for
other subsystems than the interrupt subsystem, so move it into lib/.
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/r/20221227022905.352674-6-ming.lei@redhat.com
|
|
The struct device driver-data pointer is used for any data that a driver
may need in various callbacks while bound to the device. For
convenience, subsystems typically provide wrappers such as
usb_set_intfdata() of the generic accessor functions for use in bus
callbacks.
There is generally no longer any need for a driver to clear the pointer,
but since commit 0998d0631001 ("device-core: Ensure drvdata = NULL when
no driver is bound") the driver-data pointer is set to NULL by driver
core post unbind anyway.
For historical reasons, USB core also clears this pointer when an
explicitly claimed interface is released.
Due to a misunderstanding, a misleading kernel doc comment for
usb_set_intfdata() was recently added which claimed that the driver data
pointer must not be cleared during disconnect before "all actions [are]
completed", which is both imprecise and incorrect.
Specifically, drivers like cdc-acm which claim additional interfaces use
the driver-data pointer as a flag which is cleared when the first
interface is unbound. As long as a driver does not do something odd like
dereference the pointer in, for example, completion callbacks, this can
be done at any time during disconnect. And in any case this is no
different than for any other resource, like the driver data itself,
which may be freed by the disconnect callback.
Note that the comment actually also claimed that the interface itself
was somehow being set to NULL by driver core.
Fix the kernel doc by removing incorrect, overly specific and misleading
details and adding a comment about why some drivers do clear the
driver-data pointer.
Fixes: 27ef17849779 ("usb: add usb_set_intfdata() documentation")
Signed-off-by: Johan Hovold <johan@kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/r/20221212152035.31806-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This change adds callback to evaluate presence of contaminant in
the TCPCI layer.
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20230114093246.1933321-2-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
On some of the TCPC implementations, when the Type-C port is exposed
to contaminants, such as water, TCPC stops toggling while reporting OPEN
either by the time TCPM reads CC pin status or during CC debounce
window. This causes TCPM to be stuck in TOGGLING state. If TCPM is made
to restart toggling, the behavior recurs causing redundant CPU wakeups
till the USB-C port is free of contaminant.
[206199.287817] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0, disconnected]
[206199.640337] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0, disconnected]
[206199.985789] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0, disconnected]
(or)
[ 7853.867577] Start toggling
[ 7853.889921] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0, disconnected]
[ 7855.698765] CC1: 0 -> 0, CC2: 0 -> 5 [state TOGGLING, polarity 0, connected]
[ 7855.698790] state change TOGGLING -> SNK_ATTACH_WAIT [rev3 NONE_AMS]
[ 7855.698826] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev3 NONE_AMS]
[ 7855.703559] CC1: 0 -> 0, CC2: 5 -> 5 [state SNK_ATTACH_WAIT, polarity 0, connected]
[ 7855.856555] CC1: 0 -> 0, CC2: 5 -> 0 [state SNK_ATTACH_WAIT, polarity 0, disconnected]
[ 7855.856581] state change SNK_ATTACH_WAIT -> SNK_ATTACH_WAIT [rev3 NONE_AMS]
[ 7855.856613] pending state change SNK_ATTACH_WAIT -> SNK_UNATTACHED @ 170 ms [rev3 NONE_AMS]
[ 7856.027744] state change SNK_ATTACH_WAIT -> SNK_UNATTACHED [delayed 170 ms]
[ 7856.181949] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0, disconnected]
[ 7856.187896] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0, disconnected]
[ 7857.645630] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0, disconnected]
[ 7857.647291] CC1: 0 -> 0, CC2: 0 -> 5 [state TOGGLING, polarity 0, connected]
[ 7857.647298] state change TOGGLING -> SNK_ATTACH_WAIT [rev3 NONE_AMS]
[ 7857.647310] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev3 NONE_AMS]
[ 7857.808106] CC1: 0 -> 0, CC2: 5 -> 0 [state SNK_ATTACH_WAIT, polarity 0, disconnected]
[ 7857.808123] state change SNK_ATTACH_WAIT -> SNK_ATTACH_WAIT [rev3 NONE_AMS]
[ 7857.808150] pending state change SNK_ATTACH_WAIT -> SNK_UNATTACHED @ 170 ms [rev3 NONE_AMS]
[ 7857.978727] state change SNK_ATTACH_WAIT -> SNK_UNATTACHED [delayed 170 ms]
To mitigate redundant TCPM wakeups, TCPCs which do have the needed hardware
can implement the check_contaminant callback which is invoked by TCPM
to evaluate for presence of contaminant. Lower level TCPC driver can
restart toggling through TCPM_PORT_CLEAN event when the driver detects
that USB-C port is free of contaminant. check_contaminant callback also
passes the disconnect_while_debounce flag which when true denotes that
the CC pins transitioned to OPEN state during the CC debounce window.
Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20230114093246.1933321-1-badhri@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Document the transfer buffer requirement. That is, the buffer must be
DMAble - otherwise data corruption might occur.
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20221220-usb-dmadoc-v4-0-74a045bf14f4@chromium.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a helper to evaluate ACPI usb device specific method (_DSM) provided
in case the USB3 port shouldn't enter U1 and U2 link states.
This _DSM was added as port specific retimer configuration may lead to
exit latencies growing beyond U1/U2 exit limits, and OS needs a way to
find which ports can't support U1/U2 link power management states.
This _DSM is also used by windows:
Link: https://docs.microsoft.com/en-us/windows-hardware/drivers/bringup/usb-device-specific-method---dsm-
Some patch issues found in testing resolved by Ron Lee
Cc: stable@vger.kernel.org
Tested-by: Ron Lee <ron.lee@intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20230116142216.1141605-7-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
For consistency with the new efivar_is_available() function, change the
return type of efivar_supports_writes() to bool.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Since commit 0f5b2c69a4cb ("efi: vars: Remove deprecated 'efivars' sysfs
interface") and the removal of the sysfs interface there are no users of
the efivars kobject.
Drop the kobject argument from efivars_register() and add a new
efivar_is_available() helper in favour of the old efivars_kobject().
Note that the new helper uses the prefix 'efivar' (i.e. without an 's')
for consistency with efivar_supports_writes() and the rest of the
interface (except the registration functions).
For the benefit of drivers with optional EFI support, also provide a
dummy implementation of efivar_is_available().
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Since commit fc7a6209d571 ("bus: Make remove callback return
void") forces bus_type::remove be void-returned, it doesn't
make much sense for any bus based driver implementing remove
callbalk to return non-void to its caller.
As such, change the remove function for Hyper-V VMBus based
drivers to return void.
Signed-off-by: Dawei Li <set_pte_at@outlook.com>
Link: https://lore.kernel.org/r/TYCP286MB2323A93C55526E4DF239D3ACCAFA9@TYCP286MB2323.JPNP286.PROD.OUTLOOK.COM
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
According to TLFS, in order to communicate to L0 hypervisor there needs
to be an additional bit set in the control register. This communication
is required to perform privileged instructions which can only be
performed by L0 hypervisor. An example of that could be setting up the
VMBus infrastructure.
Signed-off-by: Jinank Jain <jinankjain@linux.microsoft.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/24f9d46d5259a688113e6e5e69e21002647f4949.1672639707.git.jinankjain@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
|
|
Nothing is nor should be modifying these structs so mark them as const.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: David Rheinsberg <david.rheinsberg@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
As there are no external users this implementation detail does not need
to be exported.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: David Rheinsberg <david.rheinsberg@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
As there are no external users this implementation detail does not need
to be exported.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: David Rheinsberg <david.rheinsberg@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
As there are no external users this implementation detail does not need
to be exported.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: David Rheinsberg <david.rheinsberg@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
As no external users remain this implementation detail does not need to
be exported anymore.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: David Rheinsberg <david.rheinsberg@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
As the last user was removed we can delete this function.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: David Rheinsberg <david.rheinsberg@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
By making hid_is_usb() a non-inline function the lowlevel usbhid driver
does not have to be exported anymore.
Also mark the argument as const as it is not modified.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: David Rheinsberg <david.rheinsberg@gmail.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
Due to the two cherry picked commits from wireless to wireless-next we have
several conflicts in mt76. To avoid any bugs with conflicts merge wireless into
wireless-next.
96f134dc1964 wifi: mt76: handle possible mt76_rx_token_consume failures
fe13dad8992b wifi: mt76: dma: do not increment queue head if mt76_dma_add_buf fails
|
|
Introduce reset and reset_complete wlan callback to schedule WLAN driver
reset when ethernet/wed driver is resetting.
Tested-by: Daniel Golle <daniel@makrotopia.org>
Co-developed-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
|
|
We will report extack message if there is an error via netlink_ack(). But
if the rule is not to be exclusively executed by the hardware, extack is not
passed along and offloading failures don't get logged.
In commit 81c7288b170a ("sched: cls: enable verbose logging") Marcelo
made cls could log verbose info for offloading failures, which helps
improving Open vSwitch debuggability when using flower offloading.
It would also be helpful if userspace monitor tools, like "tc monitor",
could log this kind of message, as it doesn't require vswitchd log level
adjusment. Let's add a new tc attributes to report the extack message so
the monitor program could receive the failures. e.g.
# tc monitor
added chain dev enp3s0f1np1 parent ffff: chain 0
added filter dev enp3s0f1np1 ingress protocol all pref 49152 flower chain 0 handle 0x1
ct_state +trk+new
not_in_hw
action order 1: gact action drop
random type none pass val 0
index 1 ref 1 bind 1
Warning: mlx5_core: matching on ct_state +new isn't supported.
In this patch I only report the extack message on add/del operations.
It doesn't look like we need to report the extack message on get/dump
operations.
Note this message not only reporte to multicast groups, it could also
be reported unicast, which may affect the current usersapce tool's behaivor.
Suggested-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20230113034353.2766735-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Add fwnode APIs for finding and getting I2C adapters, which will be
used by the SFP code. These are passed the fwnode corresponding to
the adapter, and return the I2C adapter. It is the responsibility of
the caller to find the appropriate fwnode.
We keep the DT and ACPI interfaces, but where appropriate, recode them
to use the fwnode interfaces internally.
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc hotfixes from Andrew Morton:
"21 hotfixes. Thirteen of these address pre-6.1 issues and hence have
the cc:stable tag"
* tag 'mm-hotfixes-stable-2023-01-16-15-23' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (21 commits)
init/Kconfig: fix typo (usafe -> unsafe)
nommu: fix split_vma() map_count error
nommu: fix do_munmap() error path
nommu: fix memory leak in do_mmap() error path
MAINTAINERS: update Robert Foss' email address
proc: fix PIE proc-empty-vm, proc-pid-vm tests
mm: update mmap_sem comments to refer to mmap_lock
include/linux/mm: fix release_pages_arg kernel doc comment
lib/win_minmax: use /* notation for regular comments
kasan: mark kasan_kunit_executing as static
nilfs2: fix general protection fault in nilfs_btree_insert()
Docs/admin-guide/mm/zswap: remove zsmalloc's lack of writeback warning
mm/hugetlb: pre-allocate pgtable pages for uffd wr-protects
hugetlb: unshare some PMDs when splitting VMAs
mm: fix vma->anon_name memory leak for anonymous shmem VMAs
mm/shmem: restore SHMEM_HUGE_DENY precedence over MADV_COLLAPSE
mm/MADV_COLLAPSE: don't expand collapse when vm_end is past requested end
mm/userfaultfd: enable writenotify while userfaultfd-wp is enabled for a VMA
mm/khugepaged: fix collapse_pte_mapped_thp() to allow anon_vma
mm/hugetlb: fix uffd-wp handling for migration entries in hugetlb_change_protection()
...
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-next
drm/i915 feature pull #1 for v6.3:
Features and functionality:
- Meteorlake display enabling (Animesh, Luca, Stan, Jouni, Anusha)
- DP MST DSC support (Stan)
- Gamma/degamma readout support for the state checker (Ville)
- Enable SDP split support for DP 2.0 (Vinod)
- Add probe blocking support to i915.force_probe parameter (Rodrigo)
- Enable Xe HP 4tile support (Jonathan)
Refactoring and cleanups:
- Color refactoring, especially related to DSB usage (Ville)
- DSB refactoring (Ville)
- DVO refactoring (Ville)
- Backlight register and logging cleanups (Jani)
- Avoid display direct calls to uncore (Maarten, Jani)
- Add new "soc" sub-directory (Jani)
- Refactor DSC platform support checks (Swati)
Fixes:
- Interlace modes are no longer supported starting at display version 12 (Ankit)
- Use polling read for aux control (Arun)
- DMC firmware no longer requires specific versions (Gustavo)
- Fix PSR flickering and freeze issues (Jouni)
- Fix ICL+ DSI GPIO handling (Jani)
- Ratelimit errors in display engine irqs (Lucas)
- Fix DP MST DSC bpp and timeslot calculations (Stan)
- Fix CDCLK squash and crawl sequences (Ville, Anusha)
- Fix bigjoiner checks for fused pipes (Ville)
- Fix ADP+ degamma LUT size (Ville)
- Fix DVO ch7xxx and sil164 suspend/resume (Ville)
- Fix memory leak in VBT parsing (Xia Fukun)
- Fix VBT packet port selection for dual link DSI (Mikko Kovanen)
- Fix SDP infoframe product string for discrete graphics (Clint)
- Fix VLV/CHV HDMI/DP audio enable (Ville)
- Fix VRR delays and calculations (Ville)
- No longer disable transcoder for PHY test pattern change (Khaled)
- Fix dual PPS handling (Ville)
- Fix timeout and wait for DDI BUF CTL active after enabling (Ankit)
Merges:
- Backmerge drm-next to sync up with v6.2-rc1 (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87tu0wez34.fsf@intel.com
|
|
In cases where implicit sync is used, it is still useful (for things
like sub-allocation, etc) to allow userspace to opt-out of implicit
sync on per-BO basis.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/514216/
Link: https://lore.kernel.org/r/20221206192123.661448-1-robdclark@gmail.com
|
|
This commit changes virtio/vsock to use sk_buff instead of
virtio_vsock_pkt. Beyond better conforming to other net code, using
sk_buff allows vsock to use sk_buff-dependent features in the future
(such as sockmap) and improves throughput.
This patch introduces the following performance changes:
Tool: Uperf
Env: Phys Host + L1 Guest
Payload: 64k
Threads: 16
Test Runs: 10
Type: SOCK_STREAM
Before: commit b7bfaa761d760 ("Linux 6.2-rc3")
Before
------
g2h: 16.77Gb/s
h2g: 10.56Gb/s
After
-----
g2h: 21.04Gb/s
h2g: 10.76Gb/s
Signed-off-by: Bobby Eshleman <bobby.eshleman@bytedance.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzbot reported a nasty crash [1] in net_tx_action() which
made little sense until we got a repro.
This repro installs a taprio qdisc, but providing an
invalid TCA_RATE attribute.
qdisc_create() has to destroy the just initialized
taprio qdisc, and taprio_destroy() is called.
However, the hrtimer used by taprio had already fired,
therefore advance_sched() called __netif_schedule().
Then net_tx_action was trying to use a destroyed qdisc.
We can not undo the __netif_schedule(), so we must wait
until one cpu serviced the qdisc before we can proceed.
Many thanks to Alexander Potapenko for his help.
[1]
BUG: KMSAN: uninit-value in queued_spin_trylock include/asm-generic/qspinlock.h:94 [inline]
BUG: KMSAN: uninit-value in do_raw_spin_trylock include/linux/spinlock.h:191 [inline]
BUG: KMSAN: uninit-value in __raw_spin_trylock include/linux/spinlock_api_smp.h:89 [inline]
BUG: KMSAN: uninit-value in _raw_spin_trylock+0x92/0xa0 kernel/locking/spinlock.c:138
queued_spin_trylock include/asm-generic/qspinlock.h:94 [inline]
do_raw_spin_trylock include/linux/spinlock.h:191 [inline]
__raw_spin_trylock include/linux/spinlock_api_smp.h:89 [inline]
_raw_spin_trylock+0x92/0xa0 kernel/locking/spinlock.c:138
spin_trylock include/linux/spinlock.h:359 [inline]
qdisc_run_begin include/net/sch_generic.h:187 [inline]
qdisc_run+0xee/0x540 include/net/pkt_sched.h:125
net_tx_action+0x77c/0x9a0 net/core/dev.c:5086
__do_softirq+0x1cc/0x7fb kernel/softirq.c:571
run_ksoftirqd+0x2c/0x50 kernel/softirq.c:934
smpboot_thread_fn+0x554/0x9f0 kernel/smpboot.c:164
kthread+0x31b/0x430 kernel/kthread.c:376
ret_from_fork+0x1f/0x30
Uninit was created at:
slab_post_alloc_hook mm/slab.h:732 [inline]
slab_alloc_node mm/slub.c:3258 [inline]
__kmalloc_node_track_caller+0x814/0x1250 mm/slub.c:4970
kmalloc_reserve net/core/skbuff.c:358 [inline]
__alloc_skb+0x346/0xcf0 net/core/skbuff.c:430
alloc_skb include/linux/skbuff.h:1257 [inline]
nlmsg_new include/net/netlink.h:953 [inline]
netlink_ack+0x5f3/0x12b0 net/netlink/af_netlink.c:2436
netlink_rcv_skb+0x55d/0x6c0 net/netlink/af_netlink.c:2507
rtnetlink_rcv+0x30/0x40 net/core/rtnetlink.c:6108
netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline]
netlink_unicast+0xf3b/0x1270 net/netlink/af_netlink.c:1345
netlink_sendmsg+0x1288/0x1440 net/netlink/af_netlink.c:1921
sock_sendmsg_nosec net/socket.c:714 [inline]
sock_sendmsg net/socket.c:734 [inline]
____sys_sendmsg+0xabc/0xe90 net/socket.c:2482
___sys_sendmsg+0x2a1/0x3f0 net/socket.c:2536
__sys_sendmsg net/socket.c:2565 [inline]
__do_sys_sendmsg net/socket.c:2574 [inline]
__se_sys_sendmsg net/socket.c:2572 [inline]
__x64_sys_sendmsg+0x367/0x540 net/socket.c:2572
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
CPU: 0 PID: 13 Comm: ksoftirqd/0 Not tainted 6.0.0-rc2-syzkaller-47461-gac3859c02d7f #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/22/2022
Fixes: 5a781ccbd19e ("tc: Add support for configuring the taprio scheduler")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The MDIO subsystem is getting rid of MII_ADDR_C45 and thus also
encoding associated encoding of the C45 device address and register
address into one value. regmap-mdio also uses this encoding for the
C45 bus.
Move to the new C45 helpers for MDIO access and provide regmap-mdio
helper macros.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Michael Walle <michael@walle.cc>
Link: https://lore.kernel.org/r/20230116111509.4086236-1-michael@walle.cc
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The s3c24xx bast platform was removed, so this driver has no
users any more and can be removed as well.
Acked-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The s3c24xx SoC platform was completely removed, as were most of the
s3c64xx based board files, leaving only the DT based machines as well
as the MACH_WLF_CRAGG_6410 machine. All other board specific ASoC
driver can can now be recycled.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The s3c24xx platform was removed,s o there are no remaining users
for its spi driver.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The s3c24xx platform was removed, so the framebuffer driver is no longer
needed.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
All s3c24xx platforms were removed, so these five drivers are all
obsolete now.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The s3c24xx platform was removed and this driver is no longer
needed.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The s3c24xx platform is gone, so both the udc and hsudc drivers
can be removed as well.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The s3c24xx platform is gone, so the led driver can be
removed as well.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The s3c24xx platform is gone, so the clk driver can be removed as
well.
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The s3c24xx platform is gone, so this driver can be removed as well.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This device was only used by the smdk6410 board file that is now
gone, so the driver can be removed as well.
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Acked-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The s3c-adc driver is removed along with the s3c24xx platform,
so the battery driver is no longer needed either.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Following down the now unused symbols and header files, some additional
content can be dropped that is used by neither the s3c64xx DT support
nor the crag6410 board.
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
This driver could not be enabled on s3c64xx for a long time
because of the ARCH_MULTIPLATFORM dependency, so remove it.
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
A number of device drivers reference CONFIG_ARM_S3C24XX_CPUFREQ or
similar symbols that are no longer available with the platform gone,
though the drivers themselves are still used on newer platforms,
so remove these hacks.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The platform was deprecated in commit 6a5e69c7ddea ("ARM: s3c: mark
as deprecated and schedule removal") and can be removed. This includes
all files that are exclusively for s3c24xx and not shared with s3c64xx,
as well as the glue logic in Kconfig and the maintainer file entries.
Cc: Arnaud Patard <arnaud.patard@rtp-net.org>
Cc: Ben Dooks <ben-linux@fluff.org>
Cc: Christer Weinigel <christer@weinigel.se>
Cc: Guillaume GOURAT <guillaume.gourat@nexvision.tv>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Simtec Linux Team <linux@simtec.co.uk>
Cc: openmoko-kernel@lists.openmoko.org
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Assuming that we don't actually want the old-style pm-mmp2.c
and pm-pxa910.c implementation, all these files can go away
as well.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The MMP_SRAM code is no longer used by the tdma driver because
the Kconfig symbol is not selected, so remove it along with its
former callsite.
Acked-By: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
