summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2011-02-22Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
2011-02-22ASoC: Support configuration of WM8958 microphone bias analogue parametersMark Brown
The WM8958 has a different microphone bias architecture to WM8994 so needs different configuration to WM8994. Support this in platform data. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-02-22ASoC: Support WM8958 direct microphone detection IRQMark Brown
Allow direct routing of the WM8958 microphone detection signal to a GPIO to be used, saving the need to demux the interrupt. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2011-02-22ttm: Include the 'struct dev' when using the DMA API.Konrad Rzeszutek Wilk
This makes the accounting when using 'debug_dma_dump_mappings()' and CONFIG_DMA_API_DEBUG=y be assigned to the correct device instead of 'fallback'. No functional change - just cosmetic. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-02-22net: add __rcu annotations to sk_wq and wqEric Dumazet
Add proper RCU annotations/verbs to sk_wq and wq members Fix __sctp_write_space() sk_sleep() abuse (and sock->wq access) Fix sunrpc sk_sleep() abuse too Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22ipv6: Add IPv6 multicast address flag definesLinus Lüssing
This commit adds the missing IPv6 multicast address flag defines to complement the already existing multicast address scope defines and to be able to check these flags nicely in the future. Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-22Merge branch 'urgent' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6 * 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: pcmcia: re-enable Zoomed Video support cm4000_cs: Fix undefined ops warning pcmcia vs. MECR on pxa25x/sa1111 drivers/char/pcmcia/ipwireless/main.c: Convert release_resource to release_region/release_mem_region
2011-02-22Merge branch 'fix/asoc' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'fix/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ASoC: Ensure supplies are maintained for force enabled widgets ASoC: WM8994: Improve playback robustness ASoC: WM8994: Improve robustness in some use cases ASoC: WM8903: Fix mic detection enable logic ASoC: WM8903: Fix mic detection register definitions ASoC: CX20442: fix wrong reg_cache_default content ASoC: Sync initial widget state with hardware
2011-02-22bq27x00: Add bq27000 supportLars-Peter Clausen
This patch adds support for the bq27000 battery to the bq27x00 driver. The bq27000 is similar to the bq27200 except that it uses the HDQ bus instead of I2C to communicate with the host system. The driver is implemented as a platform driver. The driver expects to be provided with a read callback function through its platform data. The read function is assumed to do the lowlevel HDQ handling and read out the value of a certain register. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Tested-by: Grazvydas Ignotas <notasas@gmail.com>
2011-02-22ipvs: use hlist instead of listChangli Gao
Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: Simon Horman <horms@verge.net.au>
2011-02-21module: explicitly align module_version_attribute structureDmitry Torokhov
We force particular alignment when we generate attribute structures when generation MODULE_VERSION() data and we need to make sure that this alignment is followed when we iterate over these structures, otherwise we may crash on platforms whose natural alignment is not sizeof(void *), such as m68k. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Dmitry Torokhov <dtor@vmware.com> [ There are more issues here, but the fixes are incredibly ugly - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-02-21Make clocksource name constRussell King - ARM Linux
As nothing should be writing to the clocksource name string, make the clocksource name pointer const. Build-tested on ARM Versatile Express. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: John Stultz <johnstul@us.ibm.com>
2011-02-21timers: Add CLOCK_BOOTTIME hrtimer baseJohn Stultz
CLOCK_MONOTONIC stops while the system is in suspend. This is because to applications system suspend is invisible. However, there is a growing set of applications that are wanting to be suspend-aware, but do not want to deal with the complications of CLOCK_REALTIME (which might jump around if settimeofday is called). For these applications, I propose a new clockid: CLOCK_BOOTTIME. CLOCK_BOOTTIME is idential to CLOCK_MONOTONIC, except it also includes any time spent in suspend. This patch add hrtimer base for CLOCK_BOOTTIME, using get_monotonic_boottime/ktime_get_boottime, to allow in kernel users to set timers against. CC: Jamie Lokier <jamie@shareable.org> CC: Thomas Gleixner <tglx@linutronix.de> CC: Alexander Shishkin <virtuoso@slind.org> CC: Arve Hjønnevåg <arve@android.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2011-02-21time: Extend get_xtime_and_monotonic_offset() to also return sleepJohn Stultz
Extend get_xtime_and_monotonic_offset to get_xtime_and_monotonic_and_sleep_offset(). CC: Jamie Lokier <jamie@shareable.org> CC: Thomas Gleixner <tglx@linutronix.de> CC: Alexander Shishkin <virtuoso@slind.org> CC: Arve Hjønnevåg <arve@android.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2011-02-21time: Introduce get_monotonic_boottime and ktime_get_boottimeJohn Stultz
This adds new functions that return the monotonic time since boot (in other words, CLOCK_MONOTONIC + suspend time). CC: Jamie Lokier <jamie@shareable.org> CC: Thomas Gleixner <tglx@linutronix.de> CC: Alexander Shishkin <virtuoso@slind.org> CC: Arve Hjønnevåg <arve@android.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2011-02-21hrtimers: extend hrtimer base code to handle more then 2 clockidsJohn Stultz
The hrtimer code is written mainly with CLOCK_REALTIME and CLOCK_MONOTONIC in mind. These are clockids 0 and 1 resepctively. However, if we are to introduce any new hrtimer bases, using new clockids, we have to skip the cputimers (clockids 2,3) as well as other clockids that may not impelement timers. This patch adds a little bit of indirection between the clockid and the base, so that we can extend the base by one when we add a new clockid at number 7 or so. CC: Jamie Lokier <jamie@shareable.org> CC: Thomas Gleixner <tglx@linutronix.de> CC: Alexander Shishkin <virtuoso@slind.org> CC: Arve Hjønnevåg <arve@android.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2011-02-21Bluetooth: Add mgmt_auth_failed eventJohan Hedberg
To properly track bonding completion an event to indicate authentication failure is needed. This event will be sent whenever an authentication complete HCI event with a non-zero status comes. It will also be sent when we're acting in acceptor role for SSP authentication in which case the controller will send a Simple Pairing Complete event. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-21Bluetooth: Fix mgmt_pin_code_reply return parametersJohan Hedberg
The command complete event for mgmt_pin_code_reply & mgmt_pin_code_neg_reply should have the adapter index, Bluetooth address as well as the status. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-21Bluetooth: Add management support for user confirmation requestJohan Hedberg
This patch adds support for the user confirmation (numeric comparison) Secure Simple Pairing authentication method. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-21Bluetooth: Add mgmt_pair_device commandJohan Hedberg
This patch adds a new mgmt_pair_device which can be used to initiate a dedicated bonding procedure. Some extra callbacks are added to the hci_conn struct so that the pairing code can get notified of the completion of the procedure. Signed-off-by: Johan Hedberg <johan.hedberg@nokia.com> Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
2011-02-21workqueue: fix build failure introduced by s/freezeable/freezable/Tejun Heo
wq:fixes-2.6.38 does s/WQ_FREEZEABLE/WQ_FREEZABLE and wq:for-2.6.39 adds new usage of the flag. The combination of the two creates a build failure after merge. Fix it by renaming all freezeables to freezables. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
2011-02-21Input: atmel_mxt_ts - allow board code to specify IRQ flagsIiro Valkonen
Different board have different requirements/setups so let's be more flexible. Signed-off-by: Iiro Valkonen <iiro.valkonen@atmel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-21Input: atmel_mxt_ts - allow board code to suppliy controller configIiro Valkonen
As there is no common configuration settings that would work in every situation, remove the fixed config data from driver code and add config data to platform data. Signed-off-by: Iiro Valkonen <iiro.valkonen@atmel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-21Input: atmel_mxt_ts - get rid of qt602240 prefixes in namesIiro Valkonen
Change prefixes from qt602240 to mxt to reflect that the driver supports whole line of mXT touchscreens. Signed-off-by: Iiro Valkonen <iiro.valkonen@atmel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-21Input: qt602240_ts - rename to atmel_mxt_tsDmitry Torokhov
Since the driver will be supporting whole range of Atmels mXT touchscreen controllers we better rename it to atmel_mxt_ts. Acked-by: Iiro Valkonen <iiro.valkonen@atmel.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2011-02-21Merge branch 'master' into for-2.6.39Tejun Heo
2011-02-20tcp: Remove debug macro of TCP_CHECK_TIMERShan Wei
Now, TCP_CHECK_TIMER is not used for debuging, it does nothing. And, it has been there for several years, maybe 6 years. Remove it to keep code clearer. Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-20pcmcia: re-enable Zoomed Video supportDominik Brodowski
Allow drivers to enable Zoomed Video support. Currently, this is only used by out-of-tree drivers (L64020 DVB driver in particular). CC: <stable@kernel.org> [for 2.6.37] Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2011-02-19Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: Documentation/feature-removal-schedule.txt drivers/net/e1000e/netdev.c net/xfrm/xfrm_policy.c
2011-02-19net: dcb: match dcb_app protocol field with 802.1Qaz specJohn Fastabend
The dcb_app protocol field is a __u32 however the 802.1Qaz specification defines it as a 16 bit field. This patch brings the structure inline with the spec making it a __u16. CC: Shmulik Ravid <shmulikr@broadcom.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-02-19Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6
2011-02-19genirq: Implement irq_data based move_*_irq() versionsThomas Gleixner
No need to lookup the irq descriptor when calling from a chip callback function which has irq_data already handy. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq; Add fasteoi irq_chip quirkThomas Gleixner
Some chips want irq_eoi() only called when an interrupt is actually handled. So they have checks for INPROGRESS and DISABLED in their irq_eoi callbacks. Add a chip flag, which allows to handle that in the generic code. No impact on the fastpath. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Add preflow handler supportThomas Gleixner
sparc64 needs to call a preflow handler on certain interrupts befor calling the action chain. Integrate it into handle_fasteoi_irq. Must be enabled via CONFIG_IRQ_FASTEOI_PREFLOW. No impact when disabled. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: David S. Miller <davem@davemloft.net>
2011-02-19genirq: Consolidate set_chip_handler functionsThomas Gleixner
No need to have separate functions if we have one plus inline wrappers. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Remove desc->status when GENERIC_HARDIRQS_NO_COMPAT=yThomas Gleixner
If everything uses the right accessors, then enabling GENERIC_HARDIRQS_NO_COMPAT should just work. If not it will tell you. Don't be lazy and use the trick which I use in the core code! git grep status_use_accessors will unearth it in a split second. Offenders are tracked down and not slapped with stinking trouts. This time we use frozen shark for a better educational value. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Reflect IRQ_MOVE_PCNTXT in irq_data stateThomas Gleixner
Required by x86. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Move wakeup state to irq_dataThomas Gleixner
Some irq_chips need to know the state of wakeup mode for setting the trigger type etc. Reflect it in irq_data state. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Add IRQCHIP_SET_TYPE_MASKED flagThomas Gleixner
irq_chips, which require to mask the chip before changing the trigger type should set this flag. So the core takes care of it and the requirement for looking into desc->status in the chip goes away. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Linus Walleij <linus.walleij@stericsson.com> Cc: Lars-Peter Clausen <lars@metafoo.de>
2011-02-19genirq: Add flags to irq_chipThomas Gleixner
Looking through irq_chip implementations I noticed that some of them have special requirements, like setting the type masked and therefor fiddle in irq_desc->status. Add a flag field, so the core code can handle it. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Cleanup irq.hThomas Gleixner
Put the constants into an enum and document them. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Mirror irq trigger type bits in irq_data.stateThomas Gleixner
That's the data structure chip functions get provided. Also allow them to signal the core code that they updated the flags in irq_data.state by returning IRQ_SET_MASK_OK_NOCOPY. The default is unchanged. The type bits should be accessed via: val = irqd_get_trigger_type(irqdata); and irqd_set_trigger_type(irqdata, val); Coders who access them directly will be tracked down and slapped with stinking trouts. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Move IRQ_AFFINITY_SET to coreThomas Gleixner
Keep status in sync until last abuser is gone. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Mirror IRQ_PER_CPU and IRQ_NO_BALANCING in irq_data.stateThomas Gleixner
That's the right data structure to look at for arch code. Accessor functions are provided. irqd_is_per_cpu(irqdata); irqd_can_balance(irqdata); Coders who access them directly will be tracked down and slapped with stinking trouts. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Make CHECK_IRQ_PER_CPU an inline and deprecate itThomas Gleixner
Its' too ugly and needs to go. The only users are core code and parisc. Core code does not need it and parisc gets a new check once IRQ_PER_CPU is reflected in irq_data.state. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Remove CONFIG_IRQ_PER_CPUThomas Gleixner
The saving of this switch is minimal versus the ifdef mess it creates. Simple enable PER_CPU unconditionally and remove the config switch. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Add IRQ_MOVE_PENDING to irq_data.stateThomas Gleixner
chip implementations need to know about it. Keep status in sync until all users are fixed. Accessor function: irqd_is_setaffinity_pending(irqdata) Coders who access them directly will be tracked down and slapped with stinking trouts. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Add state field to irq_dataThomas Gleixner
Some chip implementations need to access certain status flags. With sparse irqs that requires a lookup of the irq descriptor. Add a state field which contains such flags. Name it in a way which will make coders happy to access it with the proper accessor functions. And it's easy to grep for. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Move IRQ_SUSPENDED to coreThomas Gleixner
No users outside of core. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-19genirq: Move IRQ_MASKED to coreThomas Gleixner
Keep status in sync until all users are fixed. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
generated by cgit (git 2.34.1) at 2025-09-24 16:15:05 +0000