| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
v2: with kdoc fixes per Paolo Abeni.
The following patchset contains Netfilter fixes for net:
Patch #1 and #2 handle an esoteric scenario: Given two tasks sending UDP
packets to one another, two packets of the same flow in each direction
handled by different CPUs that result in two conntrack objects in NEW
state, where reply packet loses race. Then, patch #3 adds a testcase for
this scenario. Series from Florian Westphal.
1) NAT engine can falsely detect a port collision if it happens to pick
up a reply packet as NEW rather than ESTABLISHED. Add extra code to
detect this and suppress port reallocation in this case.
2) To complete the clash resolution in the reply direction, extend conntrack
logic to detect clashing conntrack in the reply direction to existing entry.
3) Adds a test case.
Then, an assorted list of fixes follow:
4) Add a selftest for tproxy, from Antonio Ojea.
5) Guard ctnetlink_*_size() functions under
#if defined(CONFIG_NETFILTER_NETLINK_GLUE_CT) || defined(CONFIG_NF_CONNTRACK_EVENTS)
From Andy Shevchenko.
6) Use -m socket --transparent in iptables tproxy documentation.
From XIE Zhibang.
7) Call kfree_rcu() when releasing flowtable hooks to address race with
netlink dump path, from Phil Sutter.
8) Fix compilation warning in nf_reject with CONFIG_BRIDGE_NETFILTER=n.
From Simon Horman.
9) Guard ctnetlink_label_size() under CONFIG_NF_CONNTRACK_EVENTS which
is its only user, to address a compilation warning. From Simon Horman.
10) Use rcu-protected list iteration over basechain hooks from netlink
dump path.
11) Fix memcg for nf_tables, use GFP_KERNEL_ACCOUNT is not complete.
12) Remove old nfqueue conntrack clash resolution. Instead trying to
use same destination address consistently which requires double DNAT,
use the existing clash resolution which allows clashing packets
go through with different destination. Antonio Ojea originally
reported an issue from the postrouting chain, I proposed a fix:
https://lore.kernel.org/netfilter-devel/ZuwSwAqKgCB2a51-@calendula/T/
which he reported it did not work for him.
13) Adds a selftest for patch 12.
14) Fixes ipvs.sh selftest.
netfilter pull request 24-09-26
* tag 'nf-24-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
selftests: netfilter: Avoid hanging ipvs.sh
kselftest: add test for nfqueue induced conntrack race
netfilter: nfnetlink_queue: remove old clash resolution logic
netfilter: nf_tables: missing objects with no memcg accounting
netfilter: nf_tables: use rcu chain hook list iterator from netlink dump path
netfilter: ctnetlink: compile ctnetlink_label_size with CONFIG_NF_CONNTRACK_EVENTS
netfilter: nf_reject: Fix build warning when CONFIG_BRIDGE_NETFILTER=n
netfilter: nf_tables: Keep deleted flowtable hooks until after RCU
docs: tproxy: ignore non-transparent sockets in iptables
netfilter: ctnetlink: Guard possible unused functions
selftests: netfilter: nft_tproxy.sh: add tcp tests
selftests: netfilter: add reverse-clash resolution test case
netfilter: conntrack: add clash resolution for reverse collisions
netfilter: nf_nat: don't try nat source port reallocation for reverse dir clash
====================
Link: https://patch.msgid.link/20240926110717.102194-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
For historical reasons there are two clash resolution spots in
netfilter, one in nfnetlink_queue and one in conntrack core.
nfnetlink_queue one was added first: If a colliding entry is found, NAT
NAT transformation is reversed by calling nat engine again with altered
tuple.
See commit 368982cd7d1b ("netfilter: nfnetlink_queue: resolve clash for
unconfirmed conntracks") for details.
One problem is that nf_reroute() won't take an action if the queueing
doesn't occur in the OUTPUT hook, i.e. when queueing in forward or
postrouting, packet will be sent via the wrong path.
Another problem is that the scenario addressed (2nd UDP packet sent with
identical addresses while first packet is still being processed) can also
occur without any nfqueue involvement due to threaded resolvers doing
A and AAAA requests back-to-back.
This lead us to add clash resolution logic to the conntrack core, see
commit 6a757c07e51f ("netfilter: conntrack: allow insertion of clashing
entries"). Instead of fixing the nfqueue based logic, lets remove it
and let conntrack core handle this instead.
Retain the ->update hook for sake of nfqueue based conntrack helpers.
We could axe this hook completely but we'd have to split confirm and
helper logic again, see commit ee04805ff54a ("netfilter: conntrack: make
conntrack userspace helpers work again").
This SHOULD NOT be backported to kernels earlier than v5.6; they lack
adequate clash resolution handling.
Patch was originally written by Pablo Neira Ayuso.
Reported-by: Antonio Ojea <aojea@google.com>
Closes: https://bugzilla.netfilter.org/show_bug.cgi?id=1766
Signed-off-by: Florian Westphal <fw@strlen.de>
Tested-by: Antonio Ojea <aojea@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The work can submit URBs and the URBs can schedule the work.
This cycle needs to be broken, when a device is to be stopped.
Use a flag to do so.
This is a design issue as old as the driver.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
CC: stable@vger.kernel.org
Link: https://patch.msgid.link/20240919123525.688065-1-oneukum@suse.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The old setup function drm_fbdev_ttm_setup() is unused. Remove it and
its internal callbacks. New drivers should call drm_client_setup()
instead.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-73-tzimmermann@suse.de
|
|
Rework fbdev probing to support fbdev_probe in struct drm_driver
and reimplement the old fb_probe callback on top of it. Provide an
initializer macro for struct drm_driver that sets the callback
according to the kernel configuration.
This change allows the common fbdev client to run on top of TTM-
based DRM drivers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-65-tzimmermann@suse.de
|
|
The old setup function drm_fbdev_shmem_setup() is unused. Remove it
and its internal callbacks. New drivers should call drm_client_setup()
instead.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-64-tzimmermann@suse.de
|
|
Rework fbdev probing to support fbdev_probe in struct drm_driver
and reimplement the old fb_probe callback on top of it. Provide an
initializer macro for struct drm_driver that sets the callback
according to the kernel configuration.
This change allows the common fbdev client to run on top of SHMEM-
based DRM drivers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-50-tzimmermann@suse.de
|
|
The old setup function drm_fbdev_dma_setup() is unused. Remove it and
its internal callbacks. New drivers should call drm_client_setup()
instead.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-49-tzimmermann@suse.de
|
|
Rework fbdev probing to support fbdev_probe in struct drm_driver
and reimplement the old fb_probe callback on top of it. Provide an
initializer macro for struct drm_driver that sets the callback
according to the kernel configuration.
This change allows the common fbdev client to run on top of DMA-
based DRM drivers.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-6-tzimmermann@suse.de
|
|
DRM may support multiple in-kernel clients that run as soon as a DRM
driver has been registered. To select the client(s) in a single place,
introduce drm_client_setup().
Drivers that call the new helper automatically instantiate the kernel's
configured default clients. Only fbdev emulation is currently supported.
Later versions can add support for DRM-based logging, a boot logo or even
a console.
Some drivers handle the color mode for clients internally. Provide the
helper drm_client_setup_with_color_mode() for them.
Using the new interface requires the driver to select
DRM_CLIENT_SELECTION in its Kconfig. For now this only enables the
client-setup helpers if the fbdev client has been configured by the
user. A future patchset will further modularize client support and
rework DRM_CLIENT_SELECTION to select the correct dependencies for
all its clients.
v5:
- add CONFIG_DRM_CLIENT_SELECTION und DRM_CLIENT_SETUP
v4:
- fix docs for drm_client_setup_with_fourcc() (Geert)
v3:
- fix build error
v2:
- add drm_client_setup_with_fourcc() (Laurent)
- push default-format handling into actual clients
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-5-tzimmermann@suse.de
|
|
Add an fbdev client that can work with any memory manager. The
client implementation is the same as existing code in fbdev-dma or
fbdev-shmem.
Provide struct drm_driver.fbdev_probe for the new client to allocate
the surface GEM buffer. The new callback replaces fb_probe of struct
drm_fb_helper_funcs, which does the same.
To use the new client, DRM drivers set fbdev_probe in their struct
drm_driver instance and call drm_fbdev_client_setup(). Probing and
creating the fbdev surface buffer is now independent from the other
operations in struct drm_fb_helper. For the pixel format, the fbdev
client either uses a specified format, the value in preferred_depth
or 32-bit RGB.
v2:
- test for struct drm_fb_helper.funcs for NULL (Sui)
- respect struct drm_mode_config.preferred_depth for default format
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-4-tzimmermann@suse.de
|
|
The color mode as specified on the kernel command line gives the user's
preferred color depth and number of bits per pixel. Move the
color-mode-to-format conversion from fbdev helpers into a 4CC helper,
so that it can be shared among DRM clients.
v2:
- fix grammar in commit message (Laurent)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240924071734.98201-2-tzimmermann@suse.de
|
|
Pull more block updates from Jens Axboe:
- Improve blk-integrity segment counting and merging (Keith)
- NVMe pull request via Keith:
- Multipath fixes (Hannes)
- Sysfs attribute list NULL terminate fix (Shin'ichiro)
- Remove problematic read-back (Keith)
- Fix for a regression with the IO scheduler switching freezing from
6.11 (Damien)
- Use a raw spinlock for sbitmap, as it may get called from preempt
disabled context (Ming)
- Cleanup for bd_claiming waiting, using var_waitqueue() rather than
the bit waitqueues, as that more accurately describes that it does
(Neil)
- Various cleanups (Kanchan, Qiu-ji, David)
* tag 'for-6.12/block-20240925' of git://git.kernel.dk/linux:
nvme: remove CC register read-back during enabling
nvme: null terminate nvme_tls_attrs
nvme-multipath: avoid hang on inaccessible namespaces
nvme-multipath: system fails to create generic nvme device
lib/sbitmap: define swap_lock as raw_spinlock_t
block: Remove unused blk_limits_io_{min,opt}
drbd: Fix atomicity violation in drbd_uuid_set_bm()
block: Fix elv_iosched_local_module handling of "none" scheduler
block: remove bogus union
block: change wait on bd_claiming to use a var_waitqueue
blk-integrity: improved sg segment mapping
block: unexport blk_rq_count_integrity_sg
nvme-rdma: use request to get integrity segments
scsi: use request to get integrity segments
block: provide a request helper for user integrity segments
blk-integrity: consider entire bio list for merging
blk-integrity: properly account for segments
blk-mq: set the nr_integrity_segments from bio
blk-mq: unconditional nr_integrity_segments
|
|
Fixing the wrong size of a field in hca_cap_2.
The bug was introduced by adding new fields for HWS
and not fixing the reserved field size.
Fixes: 34c626c3004a ("net/mlx5: Added missing mlx5_ifc definition for HW Steering")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
|
|
In order to store device DMA parameters, the DMA framework depends on
the device's dma_parms field to point at a valid memory location. Add
backing storage for this in struct host1x_memory_context and point to
it.
Reported-by: Jonathan Hunter <jonathanh@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240916133320.368620-1-thierry.reding@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock updates from Mike Rapoport:
- new memblock_estimated_nr_free_pages() helper to replace
totalram_pages() which is less accurate when
CONFIG_DEFERRED_STRUCT_PAGE_INIT is set
- fixes for memblock tests
* tag 'memblock-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
s390/mm: get estimated free pages by memblock api
kernel/fork.c: get estimated free pages by memblock api
mm/memblock: introduce a new helper memblock_estimated_nr_free_pages()
memblock test: fix implicit declaration of function 'strscpy'
memblock test: fix implicit declaration of function 'isspace'
memblock test: fix implicit declaration of function 'memparse'
memblock test: add the definition of __setup()
memblock test: fix implicit declaration of function 'virt_to_phys'
tools/testing: abstract two init.h into common include directory
memblock tests: include export.h in linkage.h as kernel dose
memblock tests: include memory_hotplug.h in mmzone.h as kernel dose
|
|
Expose allowed group priorities with a new device query.
This new uAPI will be used in Mesa to properly report what priorities a
user can use for EGL_IMG_context_priority.
Since this extends the uAPI and because userland needs a way to
advertise priorities accordingly, this also bumps the driver minor
version.
v2:
- Remove drm_panthor_group_allow_priority_flags definition
- Document that allowed_mask is a bitmask of drm_panthor_group_priority
v3:
- Use BIT macro in panthor_query_group_priorities_info
- Add r-b from Steven Price and Boris Brezillon
Signed-off-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240909064820.34982-4-mary.guillemard@collabora.com
|
|
This adds a new value to drm_panthor_group_priority exposing the
realtime priority to userspace.
This is required to implement NV_context_priority_realtime in Mesa.
v2:
- Add Steven Price r-b
v3:
- Add Boris Brezillon r-b
Signed-off-by: Mary Guillemard <mary.guillemard@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240909064820.34982-3-mary.guillemard@collabora.com
|
|
Add for_each_tracepoint_in_module() function to iterate tracepoints in
a module. This API is needed for handling tracepoints in a loading
module from tracepoint_module_notifier callback function.
This also update for_each_module_tracepoint() to pass the module to
callback function so that it can find module easily.
Link: https://lore.kernel.org/all/172397778740.286558.15781131277732977643.stgit@devnote2/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Add for_each_module_tracepoint() for iterating over tracepoints
on modules. This is similar to the for_each_kernel_tracepoint()
but only for the tracepoints on modules (not including kernel
built-in tracepoints).
Link: https://lore.kernel.org/all/172397777800.286558.14554748203446214056.stgit@devnote2/
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
Sync Xen's elfnote.h header from xen.git to pull in the
XEN_ELFNOTE_PHYS32_RELOC define.
xen commit dfc9fab00378 ("x86/PVH: Support relocatable dom0 kernels")
This is a copy except for the removal of the emacs editor config at the
end of the file.
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Message-ID: <20240823193630.2583107-2-jason.andryuk@amd.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Add a new V3D parameter to expose the support of Super Pages to
userspace. The userspace might want to know this information to
apply optimizations that are specific to kernels with Super Pages
enabled.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240923141348.2422499-12-mcanal@igalia.com
|
|
Create a function `drm_gem_shmem_create_with_mnt()`, similar to
`drm_gem_shmem_create()`, that has a mountpoint as a argument. This
function will create a shmem GEM object in a given tmpfs mountpoint.
This function will be useful for drivers that have a special mountpoint
with flags enabled.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240923141348.2422499-7-mcanal@igalia.com
|
|
For some applications, such as applications that uses huge pages, we might
want to have a different mountpoint, for which we pass mount flags that
better match our usecase.
Therefore, create a new function `drm_gem_object_init_with_mnt()` that
allow us to define the tmpfs mountpoint where the GEM object will be
created. If this parameter is NULL, then we fallback to `shmem_file_setup()`.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240923141348.2422499-5-mcanal@igalia.com
|
|
The init_test_probes() have been removed since
commit e44e81c5b90f ("kprobes: convert tests to kunit"), and now
it is useless, so remove it.
Link: https://lore.kernel.org/all/20240826032552.4016314-1-cuigaosheng1@huawei.com/
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
|
|
This reverts commit 8064952c65045f05ee2671fe437770e50c151776.
The series is being reverted before -rc1 as there are still reports of
lockups on shutdown, so it's not quite ready for "prime time."
Reported-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Link: https://lore.kernel.org/r/ZvMkkhyJrohaajuk@skv.local
Cc: Christoph Hellwig <hch@lst.de>
Cc: David Jeffery <djeffery@redhat.com>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Laurence Oberman <loberman@redhat.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Sagi Grimberg <sagi@grimberg.me>
Cc: Stuart Hayes <stuart.w.hayes@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
On PVH dom0, when passthrough a device to domU, QEMU and xl tools
want to use gsi number to do pirq mapping, see QEMU code
xen_pt_realize->xc_physdev_map_pirq, and xl code
pci_add_dm_done->xc_physdev_map_pirq, but in current codes, the gsi
number is got from file /sys/bus/pci/devices/<sbdf>/irq, that is
wrong, because irq is not equal with gsi, they are in different
spaces, so pirq mapping fails.
And in current linux codes, there is no method to get gsi
for userspace.
For above purpose, record gsi of pcistub devices when init
pcistub and add a new syscall into privcmd to let userspace
can get gsi when they have a need.
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Message-ID: <20240924061437.2636766-4-Jiqian.Chen@amd.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
In PVH dom0, the gsis don't get registered, but the gsi of
a passthrough device must be configured for it to be able to be
mapped into a domU.
When assigning a device to passthrough, proactively setup the gsi
of the device during that process.
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Message-ID: <20240924061437.2636766-3-Jiqian.Chen@amd.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
When device on dom0 side has been reset, the vpci on Xen side
won't get notification, so that the cached state in vpci is
all out of date with the real device state.
To solve that problem, add a new function to clear all vpci
device state when device is reset on dom0 side.
And call that function in pcistub_init_device. Because when
using "pci-assignable-add" to assign a passthrough device in
Xen, it will reset passthrough device and the vpci state will
out of date, and then device will fail to restore bar state.
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Message-ID: <20240924061437.2636766-2-Jiqian.Chen@amd.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Pull NFS client updates from Anna Schumaker:
"New Features:
- Add a 'noalignwrite' mount option for lock-less 'lost writes' prevention
- Add support for the LOCALIO protocol extention
Bugfixes:
- Fix memory leak in error path of nfs4_do_reclaim()
- Simplify and guarantee lock owner uniqueness
- Fix -Wformat-truncation warning
- Fix folio refcounts by using folio_attach_private()
- Fix failing the mount system call when the server is down
- Fix detection of "Proxying of Times" server support
Cleanups:
- Annotate struct nfs_cache_array with __counted_by()
- Remove unnecessary NULL checks before kfree()
- Convert RPC_TASK_* constants to an enum
- Remove obsolete or misleading comments and declerations"
* tag 'nfs-for-6.12-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (41 commits)
nfs: Fix `make htmldocs` warnings in the localio documentation
nfs: add "NFS Client and Server Interlock" section to localio.rst
nfs: add FAQ section to Documentation/filesystems/nfs/localio.rst
nfs: add Documentation/filesystems/nfs/localio.rst
nfs: implement client support for NFS_LOCALIO_PROGRAM
nfs/localio: use dedicated workqueues for filesystem read and write
pnfs/flexfiles: enable localio support
nfs: enable localio for non-pNFS IO
nfs: add LOCALIO support
nfs: pass struct nfsd_file to nfs_init_pgio and nfs_init_commit
nfsd: implement server support for NFS_LOCALIO_PROGRAM
nfsd: add LOCALIO support
nfs_common: prepare for the NFS client to use nfsd_file for LOCALIO
nfs_common: add NFS LOCALIO auxiliary protocol enablement
SUNRPC: replace program list with program array
SUNRPC: add svcauth_map_clnt_to_svc_cred_local
SUNRPC: remove call_allocate() BUG_ONs
nfsd: add nfsd_serv_try_get and nfsd_serv_put
nfsd: add nfsd_file_acquire_local()
nfsd: factor out __fh_verify to allow NULL rqstp to be passed
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi:
- Add support for idmapped fuse mounts (Alexander Mikhalitsyn)
- Add optimization when checking for writeback (yangyun)
- Add tracepoints (Josef Bacik)
- Clean up writeback code (Joanne Koong)
- Clean up request queuing (me)
- Misc fixes
* tag 'fuse-update-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (32 commits)
fuse: use exclusive lock when FUSE_I_CACHE_IO_MODE is set
fuse: clear FR_PENDING if abort is detected when sending request
fs/fuse: convert to use invalid_mnt_idmap
fs/mnt_idmapping: introduce an invalid_mnt_idmap
fs/fuse: introduce and use fuse_simple_idmap_request() helper
fs/fuse: fix null-ptr-deref when checking SB_I_NOIDMAP flag
fuse: allow O_PATH fd for FUSE_DEV_IOC_BACKING_OPEN
virtio_fs: allow idmapped mounts
fuse: allow idmapped mounts
fuse: warn if fuse_access is called when idmapped mounts are allowed
fuse: handle idmappings properly in ->write_iter()
fuse: support idmapped ->rename op
fuse: support idmapped ->set_acl
fuse: drop idmap argument from __fuse_get_acl
fuse: support idmapped ->setattr op
fuse: support idmapped ->permission inode op
fuse: support idmapped getattr inode op
fuse: support idmap for mkdir/mknod/symlink/create/tmpfile
fuse: support idmapped FUSE_EXT_GROUPS
fuse: add an idmap argument to fuse_simple_request
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat
Pull exfat updates from Namjae Jeon:
- Clean-up unnecessary codes as ->valid_size is supported
- buffered-IO fallback is no longer needed when using direct-IO
- Move ->valid_size extension from mmap to ->page_mkwrite. This
improves the overhead caused by unnecessary zero-out during mmap.
- Fix memleaks from exfat_load_bitmap() and exfat_create_upcase_table()
- Add sops->shutdown and ioctl
- Add Yuezhang Mo as a reviwer
* tag 'exfat-for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
MAINTAINERS: exfat: add myself as reviewer
exfat: resolve memory leak from exfat_create_upcase_table()
exfat: move extend valid_size into ->page_mkwrite()
exfat: fix memory leak in exfat_load_bitmap()
exfat: Implement sops->shutdown and ioctl
exfat: do not fallback to buffered write
exfat: drop ->i_size_ondisk
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"The main changes include converting major IO paths to use folio, and
adding various knobs to control GC more flexibly for Zoned devices.
In addition, there are several patches to address corner cases of
atomic file operations and better support for file pinning on zoned
device.
Enhancement:
- add knobs to tune foreground/background GCs for Zoned devices
- convert IO paths to use folio
- reduce expensive checkpoint trigger frequency
- allow F2FS_IPU_NOCACHE for pinned file
- forcibly migrate to secure space for zoned device file pinning
- get rid of buffer_head use
- add write priority option based on zone UFS
- get rid of online repair on corrupted directory
Bug fixes:
- fix to don't panic system for no free segment fault injection
- fix to don't set SB_RDONLY in f2fs_handle_critical_error()
- avoid unused block when dio write in LFS mode
- compress: don't redirty sparse cluster during {,de}compress
- check discard support for conventional zones
- atomic: prevent atomic file from being dirtied before commit
- atomic: fix to check atomic_file in f2fs ioctl interfaces
- atomic: fix to forbid dio in atomic_file
- atomic: fix to truncate pagecache before on-disk metadata truncation
- atomic: create COW inode from parent dentry
- atomic: fix to avoid racing w/ GC
- atomic: require FMODE_WRITE for atomic write ioctls
- fix to wait page writeback before setting gcing flag
- fix to avoid racing in between read and OPU dio write, dio completion
- fix several potential integer overflows in file offsets and dir_block_index
- fix to avoid use-after-free in f2fs_stop_gc_thread()
As usual, there are several code clean-ups and refactorings"
* tag 'f2fs-for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (60 commits)
f2fs: allow F2FS_IPU_NOCACHE for pinned file
f2fs: forcibly migrate to secure space for zoned device file pinning
f2fs: remove unused parameters
f2fs: fix to don't panic system for no free segment fault injection
f2fs: fix to don't set SB_RDONLY in f2fs_handle_critical_error()
f2fs: add valid block ratio not to do excessive GC for one time GC
f2fs: create gc_no_zoned_gc_percent and gc_boost_zoned_gc_percent
f2fs: do FG_GC when GC boosting is required for zoned devices
f2fs: increase BG GC migration window granularity when boosted for zoned devices
f2fs: add reserved_segments sysfs node
f2fs: introduce migration_window_granularity
f2fs: make BG GC more aggressive for zoned devices
f2fs: avoid unused block when dio write in LFS mode
f2fs: fix to check atomic_file in f2fs ioctl interfaces
f2fs: get rid of online repaire on corrupted directory
f2fs: prevent atomic file from being dirtied before commit
f2fs: get rid of page->index
f2fs: convert read_node_page() to use folio
f2fs: convert __write_node_page() to use folio
f2fs: convert f2fs_write_data_page() to use folio
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Pull bpf 'struct fd' updates from Alexei Starovoitov:
"This includes struct_fd BPF changes from Al and Andrii"
* tag 'bpf-next-6.12-struct-fd' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
bpf: convert bpf_token_create() to CLASS(fd, ...)
security,bpf: constify struct path in bpf_token_create() LSM hook
bpf: more trivial fdget() conversions
bpf: trivial conversions for fdget()
bpf: switch maps to CLASS(fd, ...)
bpf: factor out fetching bpf_map from FD and adding it to used_maps list
bpf: switch fdget_raw() uses to CLASS(fd_raw, ...)
bpf: convert __bpf_prog_get() to CLASS(fd, ...)
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"This adds support for the I3C HCI controller of the AMD SoC which as
expected requires quirks. Also fixes for the other drivers, including
rate selection fixes for svc.
Core:
- allow adjusting first broadcast address speed
Drivers:
- cdns: few fixes
- mipi-i3c-hci: Add AMD SoC I3C controller support and quirks, fix
get_i3c_mode
- svc: adjust rates, fix race condition"
* tag 'i3c/for-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: master: svc: Fix use after free vulnerability in svc_i3c_master Driver Due to Race Condition
i3c: master: cdns: Fix use after free vulnerability in cdns_i3c_master Driver Due to Race Condition
i3c: master: svc: adjust SDR according to i3c spec
i3c: master: svc: use slow speed for first broadcast address
i3c: master: support to adjust first broadcast address speed
i3c/master: cmd_v1: Fix the rule for getting i3c mode
i3c: master: cdns: fix module autoloading
i3c: mipi-i3c-hci: Add a quirk to set Response buffer threshold
i3c: mipi-i3c-hci: Add a quirk to set timing parameters
i3c: mipi-i3c-hci: Relocate helper macros to HCI header file
i3c: mipi-i3c-hci: Add a quirk to set PIO mode
i3c: mipi-i3c-hci: Read HC_CONTROL_PIO_MODE only after i3c hci v1.1
i3c: mipi-i3c-hci: Add AMDI5017 ACPI ID to the I3C Support List
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- support for PixArt PS/2 touchpad
- updates to tsc2004/5, usbtouchscreen, and zforce_ts drivers
- support for GPIO-only mode for ADP55888 controller
- support for touch keys in Zinitix driver
- support for querying density of Synaptics sensors
- sysfs interface for Goodex "Berlin" devices to read and write touch
IC registers
- more quirks to i8042 to handle various Tuxedo laptops
- a number of drivers have been converted to using "guard" notation
when acquiring various locks, as well as using other cleanup
functions to simplify releasing of resources (with more drivers to
follow)
- evdev will limit amount of data that can be written into an evdev
instance at a given time to 4096 bytes (170 input events) to avoid
holding evdev->mutex for too long and starving other users
- Spitz has been converted to use software nodes/properties to describe
its matrix keypad and GPIO-connected LEDs
- msc5000_ts, msc_touchkey and keypad-nomadik-ske drivers have been
removed since noone in mainline have been using them
- other assorted cleanups and fixes
* tag 'input-for-v6.12-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (98 commits)
ARM: spitz: fix compile error when matrix keypad driver is enabled
Input: hynitron_cstxxx - drop explicit initialization of struct i2c_device_id::driver_data to 0
Input: adp5588-keys - fix check on return code
Input: Convert comma to semicolon
Input: i8042 - add TUXEDO Stellaris 15 Slim Gen6 AMD to i8042 quirk table
Input: i8042 - add another board name for TUXEDO Stellaris Gen5 AMD line
Input: tegra-kbc - use of_property_read_variable_u32_array() and of_property_present()
Input: ps2-gpio - use IRQF_NO_AUTOEN flag in request_irq()
Input: ims-pcu - fix calling interruptible mutex
Input: zforce_ts - switch to using asynchronous probing
Input: zforce_ts - remove assert/deassert wrappers
Input: zforce_ts - do not hardcode interrupt level
Input: zforce_ts - switch to using devm_regulator_get_enable()
Input: zforce_ts - stop treating VDD regulator as optional
Input: zforce_ts - make zforce_idtable constant
Input: zforce_ts - use dev_err_probe() where appropriate
Input: zforce_ts - do not ignore errors when acquiring regulator
Input: zforce_ts - make parsing of contacts less confusing
Input: zforce_ts - switch to using get_unaligned_le16
Input: zforce_ts - use guard notation when acquiring mutexes
...
|
|
git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fixes from Christoph Hellwig:
- sort out a few issues with the direct calls to iommu-dma (Christoph
Hellwig, Leon Romanovsky)
* tag 'dma-mapping-6.12-2024-09-24' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: report unlimited DMA addressing in IOMMU DMA path
iommu/dma: remove most stubs in iommu-dma.h
dma-mapping: fix vmap and mmap of noncontiougs allocations
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd
Pull iommufd updates from Jason Gunthorpe:
"Collection of small cleanup and one fix:
- Sort headers and struct forward declarations
- Fix random selftest failures in some cases due to dirty tracking
tests
- Have the reserved IOVA regions mechanism work when a HWPT is used
as a nesting parent. This updates the nesting parent's IOAS with
the reserved regions of the device and will also install the ITS
doorbell page on ARM.
- Add missed validation of parent domain ops against the current
iommu
- Fix a syzkaller bug related to integer overflow during ALIGN()
- Tidy two iommu_domain attach paths"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommu: Set iommu_attach_handle->domain in core
iommufd: Avoid duplicated __iommu_group_set_core_domain() call
iommufd: Protect against overflow of ALIGN() during iova allocation
iommufd: Reorder struct forward declarations
iommufd: Check the domain owner of the parent before creating a nesting domain
iommufd/device: Enforce reserved IOVA also when attached to hwpt_nested
iommufd/selftest: Fix buffer read overrrun in the dirty test
iommufd: Reorder include files
|
|
Pull rdma updates from Jason Gunthorpe:
"Usual collection of small improvements and fixes, nothing especially
stands out to me here.
The new multipath PCI feature is a sign of things to come, I think we
will see more of this in the next 10 years. Broadcom and HNS continue
to update their drivers for their new HW generations.
Summary:
- Bug fixes and minor improvments in cxgb4, siw, mlx5, rxe, efa, rts,
hfi, erdma, hns, irdma
- Code cleanups/typos/etc. Tidy alloc_ordered_workqueue() calls
- Multipath PCI for mlx5
- Variable size work queue, SRQ changes, and relaxed ordering for new
bnxt HW
- New ODP fault resolution FW protocol in mlx5
- New 'rdma monitor' netlink mechanism"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (99 commits)
RDMA/bnxt_re: Remove the unused variable en_dev
RDMA/nldev: Add missing break in rdma_nl_notify_err_msg()
RDMA/irdma: fix error message in irdma_modify_qp_roce()
RDMA/cxgb4: Added NULL check for lookup_atid
RDMA/hns: Fix ah error counter in sw stat not increasing
RDMA/bnxt_re: Recover the device when FW error is detected
RDMA/bnxt_re: Group all operations under add_device and remove_device
RDMA/bnxt_re: Use the aux device for L2 ULP callbacks
RDMA/bnxt_re: Change aux driver data to en_info to hold more information
RDMA/nldev: Expose whether RDMA monitoring is supported
RDMA/nldev: Add support for RDMA monitoring
RDMA/mlx5: Use IB set_netdev and get_netdev functions
RDMA/device: Remove optimization in ib_device_get_netdev()
RDMA/mlx5: Initialize phys_port_cnt earlier in RDMA device creation
RDMA/mlx5: Obtain upper net device only when needed
RDMA/mlx5: Check RoCE LAG status before getting netdev
RDMA/mlx5: Consider the query_vuid cap for data_direct
net/mlx5: Handle memory scheme ODP capabilities
RDMA/mlx5: Add implicit MR handling to ODP memory scheme
RDMA/mlx5: Add handling for memory scheme page fault events
...
|
|
Pull more io_uring updates from Jens Axboe:
"Mostly just a set of fixes in here, or little changes that didn't get
included in the initial pull request. This contains:
- Move the SQPOLL napi polling outside the submission lock (Olivier)
- Rename of the "copy buffers" API that got added in the 6.12 merge
window. There's really no copying going on, it's just referencing
the buffers. After a bit of consideration, decided that it was
better to simply rename this to avoid potential confusion (me)
- Shrink struct io_mapped_ubuf from 48 to 32 bytes, by changing it to
start + len tracking rather than having start / end in there, and
by removing the caching of folio_mask when we can just calculate it
from folio_shift when we need it (me)
- Fixes for the SQPOLL affinity checking (me, Felix)
- Fix for how cqring waiting checks for the presence of task_work.
Just check it directly rather than check for a specific
notification mechanism (me)
- Tweak to how request linking is represented in tracing (me)
- Fix a syzbot report that deliberately sets up a huge list of
overflow entries, and then hits rcu stalls when flushing this list.
Just check for the need to preempt, and drop/reacquire locks in the
loop. There's no state maintained over the loop itself, and each
entry is yanked from head-of-list (me)"
* tag 'for-6.12/io_uring-20240922' of git://git.kernel.dk/linux:
io_uring: check if we need to reschedule during overflow flush
io_uring: improve request linking trace
io_uring: check for presence of task_work rather than TIF_NOTIFY_SIGNAL
io_uring/sqpoll: do the napi busy poll outside the submission block
io_uring: clean up a type in io_uring_register_get_file()
io_uring/sqpoll: do not put cpumask on stack
io_uring/sqpoll: retain test for whether the CPU is valid
io_uring/rsrc: change ubuf->ubuf_end to length tracking
io_uring/rsrc: get rid of io_mapped_ubuf->folio_mask
io_uring: rename "copy buffers" to "clone buffers"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock updates from Mickaël Salaün:
"We can now scope a Landlock domain thanks to a new "scoped" field that
can deny interactions with resources outside of this domain.
The LANDLOCK_SCOPE_ABSTRACT_UNIX_SOCKET flag denies connections to an
abstract UNIX socket created outside of the current scoped domain, and
the LANDLOCK_SCOPE_SIGNAL flag denies sending a signal to processes
outside of the current scoped domain.
These restrictions also apply to nested domains according to their
scope. The related changes will also be useful to support other kind
of IPC isolations"
* tag 'landlock-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
landlock: Document LANDLOCK_SCOPE_SIGNAL
samples/landlock: Add support for signal scoping
selftests/landlock: Test signal created by out-of-bound message
selftests/landlock: Test signal scoping for threads
selftests/landlock: Test signal scoping
landlock: Add signal scoping
landlock: Document LANDLOCK_SCOPE_ABSTRACT_UNIX_SOCKET
samples/landlock: Add support for abstract UNIX socket scoping
selftests/landlock: Test inherited restriction of abstract UNIX socket
selftests/landlock: Test connected and unconnected datagram UNIX socket
selftests/landlock: Test UNIX sockets with any address formats
selftests/landlock: Test abstract UNIX socket scoping
selftests/landlock: Test handling of unknown scope
landlock: Add abstract UNIX socket scoping
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull key updates from Jarkko Sakkinen:
"The bulk of this is OpenSSL 3.0 compatibility fixes for the signing
and certificates"
* tag 'keys-next-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
sign-file,extract-cert: use pkcs11 provider for OPENSSL MAJOR >= 3
sign-file,extract-cert: avoid using deprecated ERR_get_error_line()
sign-file,extract-cert: move common SSL helper functions to a header
KEYS: prevent NULL pointer dereference in find_asymmetric_key()
KEYS: Remove unused declarations
|
|
The largest infoframe we create is the DRM (Dynamic Range Mastering)
infoframe which is 26 bytes + a 4 byte header, for a total of 30
bytes.
With HDMI_MAX_INFOFRAME_SIZE set to 29 bytes, as it is now, we
allocate too little space to pack a DRM infoframe in
write_device_infoframe(), leading to an ENOSPC return from
hdmi_infoframe_pack(), and never calling the connector's
write_infoframe() vfunc.
Instead of having HDMI_MAX_INFOFRAME_SIZE defined in two places,
replace HDMI_MAX_INFOFRAME_SIZE with HDMI_INFOFRAME_SIZE(MAX) and make
MAX 27 bytes - which is defined by the HDMI specification to be the
largest infoframe payload.
Fixes: f378b77227bc ("drm/connector: hdmi: Add Infoframes generation")
Fixes: c602e4959a0c ("drm/connector: hdmi: Create Infoframe DebugFS entries")
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240827163918.48160-1-derek.foreman@collabora.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
Function drm_sched_entity_push_job() doesn't have a return value,
remove the return value description for it.
Correct several other typo errors.
v2 (Philipp):
- more correction with related comments.
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20240917144732.2758572-1-shuicheng.lin@intel.com
|
|
xfrm_net still contained the no-longer-used inexact policy list heads,
remove them.
Fixes: a54ad727f745 ("xfrm: policy: remove remaining use of inexact list")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
Fixes a race condition reported here: https://github.com/AsahiLinux/linux/issues/309#issuecomment-2238968609
The whole premise of lockless access to a single-producer-single-
consumer queue is that there is just a single producer and single
consumer. That means we can't call drm_sched_can_queue() (which is
about queueing more work to the hw, not to the spsc queue) from
anywhere other than the consumer (wq).
This call in the producer is just an optimization to avoid scheduling
the consuming worker if it cannot yet queue more work to the hw. It
is safe to drop this optimization to avoid the race condition.
Suggested-by: Asahi Lina <lina@asahilina.net>
Fixes: a78422e9dff3 ("drm/sched: implement dynamic job-flow control")
Closes: https://github.com/AsahiLinux/linux/issues/309
Cc: stable@vger.kernel.org
Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Tested-by: Janne Grunau <j@jannau.net>
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240913202301.16772-1-robdclark@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media updates from Mauro Carvalho Chehab:
- New CEC driver: Extron DA HD 4K Plus
- Lots of driver fixes, cleanups and improvements
* tag 'media/v6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (179 commits)
media: atomisp: Use clamp() in ia_css_eed1_8_vmem_encode()
media: atomisp: Fix eed1_8 code assigning signed values to an unsigned variable
media: atomisp: set lock before calling vb2_queue_init()
media: atomisp: Improve binary finding debug logging
media: atomisp: Drop dev_dbg() calls from hmm_[alloc|free]()
media: atomisp: csi2-bridge: Add DMI quirk for t4ka3 on Xiaomi Mipad2
media: atomisp: add missing wait_prepare/finish ops
media: atomisp: Remove unused declaration
media: atomisp: use clamp() in compute_coring()
media: atomisp: use clamp() in ia_css_eed1_8_encode()
media: atomisp: Simplify ia_css_pipe_create_cas_scaler_desc_single_output()
media: atomisp: Replace rarely used macro from math_support.h
media: atomisp: Remove duplicated leftover, i.e. sh_css_dvs_info.h
media: atomisp: bnr: fix trailing statement
media: atomisp: move trailing */ to separate lines
media: atomisp: move trailing statement to next line.
media: atomisp: Fix trailing statement in ia_css_de.host.c
media: atomisp: Fix spelling mistakes in atomisp.h
media: atomisp: Fix spelling mistakes in atomisp_platform.h
media: atomisp: Fix spelling mistake in csi_rx_public.h
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"The core clk framework is left largely untouched this time around
except for support for the newly ratified DT property
'assigned-clock-rates-u64'.
I'm much more excited about the support for loading DT overlays from
KUnit tests so that we can test how the clk framework parses DT nodes
during clk registration. The clk framework has some places that are
highly DeviceTree dependent so this charts the path to extend the
KUnit tests to cover even more framework code in the future. I've got
some more tests on the list that use the DT overlay support, but they
uncovered issues with clk unregistration that I'm still working on
fixing.
Outside the core, the clk driver update pile is dominated by Qualcomm
and Renesas SoCs, making it fairly usual. Looking closer, there are
fixes for things all over the place, like adding missing clk
frequencies or moving defines for the number of clks out of DT binding
headers into the drivers. There are even conversions of DT bindings to
YAML and migration away from strings to describe clk topology. Overall
it doesn't look unusual so I expect the new drivers to be where we'll
have fixes in the coming weeks.
Core:
- KUnit tests for clk registration and fixed rate basic clk type
- A couple more devm helpers, one consumer and one provider
- Support for assigned-clock-rates-u64
New Drivers:
- Camera, display and GPU clocks on Qualcomm SM4450
- Camera clocks on Qualcomm SM8150
- Rockchip rk3576 clks
- Microchip SAM9X7 clks
- Renesas RZ/V2H(P) (R9A09G057) clks
Updates:
- Mark a bunch of struct freq_tbl const to reduce .data usage
- Add Qualcomm MSM8226 A7PLL and Regera PLL support
- Fix the Qualcomm Lucid 5LPE PLL configuration sequence to not reuse
Trion, as they do differ
- A number of fixes to the Qualcomm SM8550 display clock driver
- Fold Qualcomm SM8650 display clock driver into SM8550 one
- Add missing clocks and GDSCs needed for audio on Qualcomm MSM8998
- Add missing USB MP resets, GPLL9, and QUPv3 DFS to Qualcomm SC8180X
- Fix sdcc clk frequency tables on Qualcomm SC8180X
- Drop the Qualcomm SM8150 gcc_cpuss_ahb_clk_src
- Mark Qualcomm PCIe GDSCs as RET_ON on sm8250 and sm8540 to avoid
them turning off during suspend
- Use the HW_CTRL mechanism on Qualcomm SM8550 video clock controller
GDSCs
- Get rid of CLK_NR_CLKS defines in Rockchip DT binding headers
- Some fixes for Rockchip rk3228 and rk3588
- Exynos850: Add clock for Thermal Management Unit
- Exynos7885: Fix duplicated ID in the header, add missing TOP PLLs
and add clocks for USB block in the FSYS clock controller
- ExynosAutov9: Add DPUM clock controller
- ExynosAutov920: Add new (first) clock controllers: TOP and PERIC0
(and a bit more complete bindings)
- Use clk_hw pointer instead of fw_name for acm_aud_clk[0-1]_sel
clocks on i.MX8Q as parents in ACM provider
- Add i.MX95 NETCMIX support to the block control provider
- Fix parents for ENETx_REF_SEL clocks on i.MX6UL
- Add USB clocks, resets and power domains on Renesas RZ/G3S
- Add Generic Timer (GTM), I2C Bus Interface (RIIC), SD/MMC Host
Interface (SDHI) and Watchdog Timer (WDT) clocks and resets on
Renesas RZ/V2H
- Add PCIe, PWM, and CAN-FD clocks on Renesas R-Car V4M
- Add LCD controller clocks and resets on Renesas RZ/G2UL
- Add DMA clocks and resets on Renesas RZ/G3S
- Add fractional multiplication PLL support on Renesas R-Car Gen4
- Document support for the Renesas RZ/G2M v3.0 (r8a774a3) SoC
- Support for the Microchip SAM9X7 SoC as follows:
- Updates for the Microchip PLL drivers
- DT binding documentation updates (for the new clock driver and for
the slow clock controller that SAM9X7 is using)
- A fix for the Microchip SAMA7G5 clock driver to avoid allocating
more memory than necessary
- Constify some Amlogic structs
- Add SM1 eARC clocks for Amlogic
- Introduce a symbol namespace for Amlogic clock specific symbols
- Add reset controller support to audiomix block control on i.MX
- Add CLK_SET_RATE_PARENT flag to all audiomix clocks and to i.MX7D
lcdif_pixel_src clock
- Fix parent clocks for earc_phy and audpll on i.MX8MP
- Fix default parents for enet[12]_ref_sel on i.MX6UL
- Add ops in composite 8M and 93 that allow no-op on disable
- Add check for PCC present bit on composite 7ULP register
- Fix fractional part for fracn-gppll on prepare in i.MX
- Fix clock tree update for TF-A managed clocks on i.MX8M
- Drop CLK_SET_PARENT_GATE for DRAM mux on i.MX7D
- Add the SAI7 IPG clock for i.MX8MN
- Mark the 'nand_usdhc_bus' clock as non-critical on i.MX8MM
- Add LVDS bypass clocks on i.MX8QXP
- Add muxes for MIPI and PHY ref clocks on i.MX
- Reorder dc0_bypass0_clk, lcd_pxl and dc1_disp clocks on i.MX8QXP
- Add 1039.5MHz and 800MHz rates to fracn-gppll table on i.MX
- Add CLK_SET_RATE_PARENT for media_disp pixel clocks on i.MX8QXP
- Add some module descriptions to the i.MX generic and the i.MXRT1050
driver
- Fix return value for bypass for composite i.MX7ULP
- Move Mediatek clk bindings to clock/
- Convert some more clk bindings to dt schema"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (180 commits)
clk: Switch back to struct platform_driver::remove()
dt-bindings: clock, reset: fix top-comment indentation rk3576 headers
clk: rockchip: remove unused mclk_pdm0_p/pdm0_p definitions
clk: provide devm_clk_get_optional_enabled_with_rate()
clk: fixed-rate: add devm_clk_hw_register_fixed_rate_parent_data()
clk: imx6ul: fix clock parent for IMX6UL_CLK_ENETx_REF_SEL
clk: renesas: r9a09g057: Add clock and reset entries for GTM/RIIC/SDHI/WDT
clk: renesas: rzv2h: Add support for dynamic switching divider clocks
clk: renesas: r9a08g045: Add clocks, resets and power domains for USB
clk: rockchip: fix error for unknown clocks
clk: rockchip: rk3588: drop unused code
clk: rockchip: Add clock controller for the RK3576
clk: rockchip: Add new pll type pll_rk3588_ddr
dt-bindings: clock, reset: Add support for rk3576
dt-bindings: clock: rockchip,rk3588-cru: drop unneeded assigned-clocks
clk: rockchip: rk3588: Fix 32k clock name for pmu_24m_32k_100m_src_p
clk: imx95: enable the clock of NETCMIX block control
dt-bindings: clock: add RMII clock selection
dt-bindings: clock: add i.MX95 NETCMIX block control
clk: imx: imx8: Use clk_hw pointer for self registered clock in clk_parent_data
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"I2C core:
- finally remove the I2C_COMPAT symbol after 15 years of deprecation
- lock client addresses during initialization to prevent race
conditions between different kinds of instantiation
- use scoped foreach OF child loops
- testunit cleanups and documentation improvements, as well as two
new tests, one for repeated start and one for triggering SMBusAlert
interrupts
I2C host drivers:
- DesignWare and Renesas I2C driver updates.
The first has has undergone through a series of cleanups that have
been sent to the mailing list a year ago for the first time and
finally get merged in this pull request. They are many, from typos
(e.g. i2/i2c), to cosmetics, to refactoring (e.g. move inline
functions to librarieas) and many others.
- all the DesignWare Kconfig options have been grouped under the
I2C_DESIGNWARE_CORE and this required some adaptation in many of
the kernel configuration files for different arm and mips boards
Cleanups:
- improve the exit path in the runtime resume function for the
Qualcomm Geni platform
- get rid of the unused "target_addr" parameter in the Intel LJCA
driver
- intialize the restart_flag in the MediaTek controller in one single
place
- constify a few global data structures in the virtio driver
- simplify the bus speed handling in the Renesas driver init function
making it more readable
- improved probe function of the Renesas R-Car driver
- switch the iMX/MXC driver to use RUNTIME_PM_OPS() instead of
SET_RUNTIME_PM_OPS()
- iMX/MXC driver cleanups
- use devm_clk_get_enabled() to simplify the Renesas EMEV2, Ingenic
and MPC drivers
Refactoring:
- Fix a potential out of boundary array access in the Nuvoton driver.
This is not a bug fix because the issue could never occur due to
hardware not having the properties listed in the array. The change
makes the driver more future proof and, at the same time, silences
code analyzers.
Improvements:
- several patches improving the runtime power management handling of
the Renesas I2C (riic) driver
- use a more descriptive adapter name in the Intel i801 driver to
show the presence of the IDF feature
- kill pending transactions when irq's can't complete their handling
in the Intel Denverton (ismt) driver, triggering a timeout
New Feature:
- support fast mode plus in the Renesas I2C (riic) driver
New support:
- Added support for:
- Renesas R9A08G045
- Rockchip RK3576
- KEBA I2C
- Theobroma Systems Mule Multiplexer.
- new i2c-keba.c driver
- new driver for The Mule i2c multiplexer
Core I2C framework:
- move runtime PM functions in order to allow them to be accessed
during device add
Devicetree:
- nVidia and Qualcomm binding improvements
- get rid of redundant "multi-master" property in the aspeed binding
- convert i2c-sprd binding to YAML
AT24 updates:
- document a new model from giantec in DT bindings"
* tag 'i2c-for-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (69 commits)
i2c: designware: Use pci_get_drvdata()
i2c: designware: Propagate firmware node
i2c: designware: Uninline i2c_dw_probe()
i2c: ljca: Remove unused "target_addr" parameter
i2c: keba: Add KEBA I2C controller support
i2c: i801: Use a different adapter-name for IDF adapters
i2c: core: Setup i2c_adapter runtime-pm before calling device_add()
dt-bindings: i2c: i2c-sprd: convert to YAML
i2c: ismt: kill transaction in hardware on timeout
i2c: designware: Group all DesignWare drivers under a single option
net: txgbe: Fix I2C Kconfig dependencies
RISC-V: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
mips: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
arm64: defconfig: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
ARM: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
ARC: configs: enable I2C_DESIGNWARE_CORE with I2C_DESIGNWARE_PLATFORM
i2c: virtio: Constify struct i2c_algorithm and struct virtio_device_id
i2c: rcar: tidyup priv->devtype handling on rcar_i2c_probe()
i2c: imx: Convert comma to semicolon
i2c: jz4780: Use devm_clk_get_enabled() helpers
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds
Pull LED updates from Lee Jones:
- Limited LED current based on thermal conditions in the QCOM flash LED
driver
- Fixed device child node usage in the BD2606MVV and PCA995x drivers
- Used device_for_each_child_node_scoped() to access child nodes in the
IS31FL319X driver
- Reset the LED controller during the probe in the LM3601X driver
- Used device_for_each_child_node() to access device child nodes in the
PCA995X driver
- Fixed CONFIG_LEDS_CLASS_MULTICOLOR dependency in the BlinkM driver
- Replaced msleep() with usleep_range() in the SUN50I-A100 driver
- Used scoped device node handling to simplify error paths in the
AAT1290, KTD2692, and MC13783 drivers
- Added missing of_node_get for probe duration in the MAX77693 driver
- Simplified using for_each_available_child_of_node_scoped() loops when
iterating over device nodes
- Used devm_clk_get_enabled() helpers in the LP55XX driver
- Converted DT bindings from TXT to YAML format for various drivers,
including LM3692x and SC2731-BLTC
- Set num_leds after allocation in the GPIO driver
- Removed irrelevant blink configuration error message in the PCA9532
driver
- Fixed module autoloading with MODULE_DEVICE_TABLE() in the Turris
Omnia driver
* tag 'leds-next-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (38 commits)
leds: turris-omnia: Fix module autoloading with MODULE_DEVICE_TABLE()
leds: pca9532: Remove irrelevant blink configuration error message
leds: gpio: Set num_leds after allocation
dt-bindings: leds: Convert leds-lm3692x to YAML format
leds: lp55xx: Use devm_clk_get_enabled() helpers
leds: as3645a: Use device_* to iterate over device child nodes
leds: qcom-lpg: Simplify with scoped for each OF child loop
leds: turris-omnia: Simplify with scoped for each OF child loop
leds: sc27xx: Simplify with scoped for each OF child loop
leds: pca9532: Simplify with scoped for each OF child loop
leds: netxbig: Simplify with scoped for each OF child loop
leds: mt6323: Simplify with scoped for each OF child loop
leds: mc13783: Use scoped device node handling to simplify error paths
leds: lp55xx: Simplify with scoped for each OF child loop
leds: is31fl32xx: Simplify with scoped for each OF child loop
leds: bcm6358: Simplify with scoped for each OF child loop
leds: bcm6328: Simplify with scoped for each OF child loop
leds: aw2013: Simplify with scoped for each OF child loop
leds: 88pm860x: Simplify with scoped for each OF child loop
leds: max77693: Simplify with scoped for each OF child loop
...
|
