| Age | Commit message (Collapse) | Author |
|---|
|
Prior to commit d64696905554 ("Reimplement RLIMIT_SIGPENDING on top of
ucounts") UCOUNT_RLIMIT_SIGPENDING rlimit was not enforced for a class of
signals. However now it's enforced unconditionally, even if
override_rlimit is set. This behavior change caused production issues.
For example, if the limit is reached and a process receives a SIGSEGV
signal, sigqueue_alloc fails to allocate the necessary resources for the
signal delivery, preventing the signal from being delivered with siginfo.
This prevents the process from correctly identifying the fault address and
handling the error. From the user-space perspective, applications are
unaware that the limit has been reached and that the siginfo is
effectively 'corrupted'. This can lead to unpredictable behavior and
crashes, as we observed with java applications.
Fix this by passing override_rlimit into inc_rlimit_get_ucounts() and skip
the comparison to max there if override_rlimit is set. This effectively
restores the old behavior.
Link: https://lkml.kernel.org/r/20241104195419.3962584-1-roman.gushchin@linux.dev
Fixes: d64696905554 ("Reimplement RLIMIT_SIGPENDING on top of ucounts")
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Co-developed-by: Andrei Vagin <avagin@google.com>
Signed-off-by: Andrei Vagin <avagin@google.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Alexey Gladkov <legion@kernel.org>
Cc: Kees Cook <kees@kernel.org>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
OOM kills due to vastly overestimated free highatomic reserves were
observed:
... invoked oom-killer: gfp_mask=0x100cca(GFP_HIGHUSER_MOVABLE), order=0 ...
Node 0 Normal free:1482936kB boost:0kB min:410416kB low:739404kB high:1068392kB reserved_highatomic:1073152KB ...
Node 0 Normal: 1292*4kB (ME) 1920*8kB (E) 383*16kB (UE) 220*32kB (ME) 340*64kB (E) 2155*128kB (UE) 3243*256kB (UE) 615*512kB (U) 1*1024kB (M) 0*2048kB 0*4096kB = 1477408kB
The second line above shows that the OOM kill was due to the following
condition:
free (1482936kB) - reserved_highatomic (1073152kB) = 409784KB < min (410416kB)
And the third line shows there were no free pages in any
MIGRATE_HIGHATOMIC pageblocks, which otherwise would show up as type 'H'.
Therefore __zone_watermark_unusable_free() underestimated the usable free
memory by over 1GB, which resulted in the unnecessary OOM kill above.
The comments in __zone_watermark_unusable_free() warns about the potential
risk, i.e.,
If the caller does not have rights to reserves below the min
watermark then subtract the high-atomic reserves. This will
over-estimate the size of the atomic reserve but it avoids a search.
However, it is possible to keep track of free pages in reserved highatomic
pageblocks with a new per-zone counter nr_free_highatomic protected by the
zone lock, to avoid a search when calculating the usable free memory. And
the cost would be minimal, i.e., simple arithmetics in the highatomic
alloc/free/move paths.
Note that since nr_free_highatomic can be relatively small, using a
per-cpu counter might cause too much drift and defeat its purpose, in
addition to the extra memory overhead.
Dependson e0932b6c1f94 ("mm: page_alloc: consolidate free page accounting") - see [1]
[akpm@linux-foundation.org: s/if/else if/, per Johannes, stealth whitespace tweak]
Link: https://lkml.kernel.org/r/20241028182653.3420139-1-yuzhao@google.com
Link: https://lkml.kernel.org/r/0d0ddb33-fcdc-43e2-801f-0c1df2031afb@suse.cz [1]
Fixes: 0aaa29a56e4f ("mm, page_alloc: reserve pageblocks for high-order atomic allocations on demand")
Signed-off-by: Yu Zhao <yuzhao@google.com>
Reported-by: Link Lin <linkl@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from can and netfilter.
Things are slowing down quite a bit, mostly driver fixes here. No
known ongoing investigations.
Current release - new code bugs:
- eth: ti: am65-cpsw:
- fix multi queue Rx on J7
- fix warning in am65_cpsw_nuss_remove_rx_chns()
Previous releases - regressions:
- mptcp: do not require admin perm to list endpoints, got missed in a
refactoring
- mptcp: use sock_kfree_s instead of kfree
Previous releases - always broken:
- sctp: properly validate chunk size in sctp_sf_ootb() fix OOB access
- virtio_net: make RSS interact properly with queue number
- can: mcp251xfd: mcp251xfd_get_tef_len(): fix length calculation
- can: mcp251xfd: mcp251xfd_ring_alloc(): fix coalescing
configuration when switching CAN modes
Misc:
- revert earlier hns3 fixes, they were ignoring IOMMU abstractions
and need to be reworked
- can: {cc770,sja1000}_isa: allow building on x86_64"
* tag 'net-6.12-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (42 commits)
drivers: net: ionic: add missed debugfs cleanup to ionic_probe() error path
net/smc: do not leave a dangling sk pointer in __smc_create()
rxrpc: Fix missing locking causing hanging calls
net/smc: Fix lookup of netdev by using ib_device_get_netdev()
net: arc: rockchip: fix emac mdio node support
net: arc: fix the device for dma_map_single/dma_unmap_single
virtio_net: Update rss when set queue
virtio_net: Sync rss config to device when virtnet_probe
virtio_net: Add hash_key_length check
virtio_net: Support dynamic rss indirection table size
netfilter: nf_tables: wait for rcu grace period on net_device removal
net: stmmac: Fix unbalanced IRQ wake disable warning on single irq case
net: vertexcom: mse102x: Fix possible double free of TX skb
mptcp: use sock_kfree_s instead of kfree
mptcp: no admin perm to list endpoints
net: phy: ti: add PHY_RST_AFTER_CLK_EN flag
net: ethernet: ti: am65-cpsw: fix warning in am65_cpsw_nuss_remove_rx_chns()
net: ethernet: ti: am65-cpsw: Fix multi queue Rx on J7
net: hns3: fix kernel crash when uninstalling driver
Revert "Merge branch 'there-are-some-bugfix-for-the-hns3-ethernet-driver'"
...
|
|
This is a preparation patch for NVMeOF target reservation
commands implantation.
Add the defines of reservation command, such as reservation log
and sub operations.
Signed-off-by: Guixin Liu <kanie@linux.alibaba.com>
Tested-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
|
|
If a call gets aborted (e.g. because kafs saw a signal) between it being
queued for connection and the I/O thread picking up the call, the abort
will be prioritised over the connection and it will be removed from
local->new_client_calls by rxrpc_disconnect_client_call() without a lock
being held. This may cause other calls on the list to disappear if a race
occurs.
Fix this by taking the client_call_lock when removing a call from whatever
list its ->wait_link happens to be on.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Fixes: 9d35d880e0e4 ("rxrpc: Move client call connection to the I/O thread")
Link: https://patch.msgid.link/726660.1730898202@warthog.procyon.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fix for net
The following series contains a Netfilter fix:
1) Wait for rcu grace period after netdevice removal is reported via event.
* tag 'nf-24-11-07' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: wait for rcu grace period on net_device removal
====================
Link: https://patch.msgid.link/20241107113212.116634-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This causes issue on, at least, nvme-mpath where my boot fails with:
WARNING: CPU: 354 PID: 2729 at block/blk-settings.c:75 blk_validate_limits+0x356/0x380
Modules linked in: tg3(+) nvme usbcore scsi_mod ptp i2c_piix4 libphy nvme_core crc32c_intel scsi_common usb_common pps_core i2c_smbus
CPU: 354 UID: 0 PID: 2729 Comm: kworker/u2061:1 Not tainted 6.12.0-rc6+ #181
Hardware name: Dell Inc. PowerEdge R7625/06444F, BIOS 1.8.3 04/02/2024
Workqueue: async async_run_entry_fn
RIP: 0010:blk_validate_limits+0x356/0x380
Code: f6 47 01 04 75 28 83 bf 94 00 00 00 00 75 39 83 bf 98 00 00 00 00 75 34 83 7f 68 00 75 32 31 c0 83 7f 5c 00 0f 84 9b fd ff ff <0f> 0b eb 13 0f 0b eb 0f 48 c7 c0 74 12 58 92 48 89 c7 e8 13 76 46
RSP: 0018:ffffa8a1dfb93b30 EFLAGS: 00010286
RAX: 0000000000000000 RBX: ffff9232829c8388 RCX: 0000000000000088
RDX: 0000000000000080 RSI: 0000000000000200 RDI: ffffa8a1dfb93c38
RBP: 000000000000000c R08: 00000000ffffffff R09: 000000000000ffff
R10: 0000000000000000 R11: 0000000000000000 R12: ffff9232829b9000
R13: ffff9232829b9010 R14: ffffa8a1dfb93c38 R15: ffffa8a1dfb93c38
FS: 0000000000000000(0000) GS:ffff923867c80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055c1b92480a8 CR3: 0000002484ff0002 CR4: 0000000000370ef0
Call Trace:
<TASK>
? __warn+0xca/0x1a0
? blk_validate_limits+0x356/0x380
? report_bug+0x11a/0x1a0
? handle_bug+0x5e/0x90
? exc_invalid_op+0x16/0x40
? asm_exc_invalid_op+0x16/0x20
? blk_validate_limits+0x356/0x380
blk_alloc_queue+0x7a/0x250
__blk_alloc_disk+0x39/0x80
nvme_mpath_alloc_disk+0x13d/0x1b0 [nvme_core]
nvme_scan_ns+0xcc7/0x1010 [nvme_core]
async_run_entry_fn+0x27/0x120
process_scheduled_works+0x1a0/0x360
worker_thread+0x2bc/0x350
? pr_cont_work+0x1b0/0x1b0
kthread+0x111/0x120
? kthread_unuse_mm+0x90/0x90
ret_from_fork+0x30/0x40
? kthread_unuse_mm+0x90/0x90
ret_from_fork_asm+0x11/0x20
</TASK>
---[ end trace 0000000000000000 ]---
presumably due to max_zone_append_sectors not being cleared to zero,
resulting in blk_validate_zoned_limits() complaining and failing.
This reverts commit 2a8f6153e1c2db06a537a5c9d61102eb591776f1.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
8c873e219970 ("netfilter: core: free hooks with call_rcu") removed
synchronize_net() call when unregistering basechain hook, however,
net_device removal event handler for the NFPROTO_NETDEV was not updated
to wait for RCU grace period.
Note that 835b803377f5 ("netfilter: nf_tables_netdev: unregister hooks
on net_device removal") does not remove basechain rules on device
removal, I was hinted to remove rules on net_device removal later, see
5ebe0b0eec9d ("netfilter: nf_tables: destroy basechain and rules on
netdevice removal").
Although NETDEV_UNREGISTER event is guaranteed to be handled after
synchronize_net() call, this path needs to wait for rcu grace period via
rcu callback to release basechain hooks if netns is alive because an
ongoing netlink dump could be in progress (sockets hold a reference on
the netns).
Note that nf_tables_pre_exit_net() unregisters and releases basechain
hooks but it is possible to see NETDEV_UNREGISTER at a later stage in
the netns exit path, eg. veth peer device in another netns:
cleanup_net()
default_device_exit_batch()
unregister_netdevice_many_notify()
notifier_call_chain()
nf_tables_netdev_event()
__nft_release_basechain()
In this particular case, same rule of thumb applies: if netns is alive,
then wait for rcu grace period because netlink dump in the other netns
could be in progress. Otherwise, if the other netns is going away then
no netlink dump can be in progress and basechain hooks can be released
inmediately.
While at it, turn WARN_ON() into WARN_ON_ONCE() for the basechain
validation, which should not ever happen.
Fixes: 835b803377f5 ("netfilter: nf_tables_netdev: unregister hooks on net_device removal")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
SMCCCv1.3 added a hint bit which callers can set in an SMCCC function ID
(AKA "FID") to indicate that it is acceptable for the SMCCC
implementation to discard SVE and/or SME state over a specific SMCCC
call. The kernel support for using this hint is broken and SMCCC calls
may clobber the SVE and/or SME state of arbitrary tasks, though FPSIMD
state is unaffected.
The kernel support is intended to use the hint when there is no SVE or
SME state to save, and to do this it checks whether TIF_FOREIGN_FPSTATE
is set or TIF_SVE is clear in assembly code:
| ldr <flags>, [<current_task>, #TSK_TI_FLAGS]
| tbnz <flags>, #TIF_FOREIGN_FPSTATE, 1f // Any live FP state?
| tbnz <flags>, #TIF_SVE, 2f // Does that state include SVE?
|
| 1: orr <fid>, <fid>, ARM_SMCCC_1_3_SVE_HINT
| 2:
| << SMCCC call using FID >>
This is not safe as-is:
(1) SMCCC calls can be made in a preemptible context and preemption can
result in TIF_FOREIGN_FPSTATE being set or cleared at arbitrary
points in time. Thus checking for TIF_FOREIGN_FPSTATE provides no
guarantee.
(2) TIF_FOREIGN_FPSTATE only indicates that the live FP/SVE/SME state in
the CPU does not belong to the current task, and does not indicate
that clobbering this state is acceptable.
When the live CPU state is clobbered it is necessary to update
fpsimd_last_state.st to ensure that a subsequent context switch will
reload FP/SVE/SME state from memory rather than consuming the
clobbered state. This and the SMCCC call itself must happen in a
critical section with preemption disabled to avoid races.
(3) Live SVE/SME state can exist with TIF_SVE clear (e.g. with only
TIF_SME set), and checking TIF_SVE alone is insufficient.
Remove the broken support for the SMCCCv1.3 SVE saving hint. This is
effectively a revert of commits:
* cfa7ff959a78 ("arm64: smccc: Support SMCCC v1.3 SVE register saving hint")
* a7c3acca5380 ("arm64: smccc: Save lr before calling __arm_smccc_sve_check()")
... leaving behind the ARM_SMCCC_VERSION_1_3 and ARM_SMCCC_1_3_SVE_HINT
definitions, since these are simply definitions from the SMCCC
specification, and the latter is used in KVM via ARM_SMCCC_CALL_HINTS.
If we want to bring this back in future, we'll probably want to handle
this logic in C where we can use all the usual FPSIMD/SVE/SME helper
functions, and that'll likely require some rework of the SMCCC code
and/or its callers.
Fixes: cfa7ff959a78 ("arm64: smccc: Support SMCCC v1.3 SVE register saving hint")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: stable@vger.kernel.org
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241106160448.2712997-1-mark.rutland@arm.com
Signed-off-by: Will Deacon <will@kernel.org>
|
|
Pull NFS client fixes from Anna Schumaker:
"These are mostly fixes that came up during the nfs bakeathon the other
week.
Stable Fixes:
- Fix KMSAN warning in decode_getfattr_attrs()
Other Bugfixes:
- Handle -ENOTCONN in xs_tcp_setup_socked()
- NFSv3: only use NFS timeout for MOUNT when protocols are compatible
- Fix attribute delegation behavior on exclusive create and a/mtime
changes
- Fix localio to cope with racing nfs_local_probe()
- Avoid i_lock contention in fs_clear_invalid_mapping()"
* tag 'nfs-for-6.12-3' of git://git.linux-nfs.org/projects/anna/linux-nfs:
nfs: avoid i_lock contention in nfs_clear_invalid_mapping
nfs_common: fix localio to cope with racing nfs_local_probe()
NFS: Further fixes to attribute delegation a/mtime changes
NFS: Fix attribute delegation behaviour on exclusive create
nfs: Fix KMSAN warning in decode_getfattr_attrs()
NFSv3: only use NFS timeout for MOUNT when protocols are compatible
sunrpc: handle -ENOTCONN in xs_tcp_setup_socket()
|
|
Add the static napi tracking strategy. That allows the user to manually
manage the napi ids list for busy polling, and eliminate the overhead of
dynamically updating the list from the fast path.
Signed-off-by: Olivier Langlois <olivier@trillion01.com>
Link: https://lore.kernel.org/r/96943de14968c35a5c599352259ad98f3c0770ba.1728828877.git.olivier@trillion01.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Rather than store the task_struct itself in struct io_kiocb, store
the io_uring specific task_struct. The life times are the same in terms
of io_uring, and this avoids doing some dereferences through the
task_struct. For the hot path of putting local task references, we can
deref req->tctx instead, which we'll need anyway in that function
regardless of whether it's local or remote references.
This is mostly straight forward, except the original task PF_EXITING
check needs a bit of tweaking. task_work is _always_ run from the
originating task, except in the fallback case, where it's run from a
kernel thread. Replace the potentially racy (in case of fallback work)
checks for req->task->flags with current->flags. It's either the still
the original task, in which case PF_EXITING will be sane, or it has
PF_KTHREAD set, in which case it's fallback work. Both cases should
prevent moving forward with the given request.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently the io_rsrc_node assignment in io_kiocb is an array of two
pointers, as two nodes may be assigned to a request - one file node,
and one buffer node. However, the buffer node can co-exist with the
provided buffers, as currently it's not supported to use both provided
and registered buffers at the same time.
This crucially brings struct io_kiocb down to 4 cache lines again, as
before it spilled into the 5th cacheline.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
arch_init_invariance_cppc() is called at the end of
acpi_cppc_processor_probe() in order to configure frequency invariance
based upon the values from _CPC.
This however doesn't work on AMD CPPC shared memory designs that have
AMD preferred cores enabled because _CPC needs to be analyzed from all
cores to judge if preferred cores are enabled.
This issue manifests to users as a warning since commit 21fb59ab4b97
("ACPI: CPPC: Adjust debug messages in amd_set_max_freq_ratio() to warn"):
```
Could not retrieve highest performance (-19)
```
However the warning isn't the cause of this, it was actually
commit 279f838a61f9 ("x86/amd: Detect preferred cores in
amd_get_boost_ratio_numerator()") which exposed the issue.
To fix this problem, change arch_init_invariance_cppc() into a new weak
symbol that is called at the end of acpi_processor_driver_init().
Each architecture that supports it can declare the symbol to override
the weak one.
Define it for x86, in arch/x86/kernel/acpi/cppc.c, and for all of the
architectures using the generic arch_topology.c code.
Fixes: 279f838a61f9 ("x86/amd: Detect preferred cores in amd_get_boost_ratio_numerator()")
Reported-by: Ivan Shapovalov <intelfx@intelfx.name>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219431
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20241104222855.3959267-1-superm1@kernel.org
[ rjw: Changelog edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
As the introduction of the support for vsock and unix sockets in sockmap,
tls_sw_has_ctx_tx/rx cannot presume the socket passed in must be IS_ICSK.
vsock and af_unix sockets have vsock_sock and unix_sock instead of
inet_connection_sock. For these sockets, tls_get_ctx may return an invalid
pointer and cause page fault in function tls_sw_ctx_rx.
BUG: unable to handle page fault for address: 0000000000040030
Workqueue: vsock-loopback vsock_loopback_work
RIP: 0010:sk_psock_strp_data_ready+0x23/0x60
Call Trace:
? __die+0x81/0xc3
? no_context+0x194/0x350
? do_page_fault+0x30/0x110
? async_page_fault+0x3e/0x50
? sk_psock_strp_data_ready+0x23/0x60
virtio_transport_recv_pkt+0x750/0x800
? update_load_avg+0x7e/0x620
vsock_loopback_work+0xd0/0x100
process_one_work+0x1a7/0x360
worker_thread+0x30/0x390
? create_worker+0x1a0/0x1a0
kthread+0x112/0x130
? __kthread_cancel_work+0x40/0x40
ret_from_fork+0x1f/0x40
v2:
- Add IS_ICSK check
v3:
- Update the commits in Fixes
Fixes: 634f1a7110b4 ("vsock: support sockmap")
Fixes: 94531cfcbe79 ("af_unix: Add unix_stream_proto for sockmap")
Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Acked-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20241106003742.399240-1-zijianzhang@bytedance.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Add the four syscalls setxattrat(), getxattrat(), listxattrat() and
removexattrat(). Those can be used to operate on extended attributes,
especially security related ones, either relative to a pinned directory
or on a file descriptor without read access, avoiding a
/proc/<pid>/fd/<fd> detour, requiring a mounted procfs.
One use case will be setfiles(8) setting SELinux file contexts
("security.selinux") without race conditions and without a file
descriptor opened with read access requiring SELinux read permission.
Use the do_{name}at() pattern from fs/open.c.
Pass the value of the extended attribute, its length, and for
setxattrat(2) the command (XATTR_CREATE or XATTR_REPLACE) via an added
struct xattr_args to not exceed six syscall arguments and not
merging the AT_* and XATTR_* flags.
[AV: fixes by Christian Brauner folded in, the entire thing rebased on
top of {filename,file}_...xattr() primitives, treatment of empty
pathnames regularized. As the result, AT_EMPTY_PATH+NULL handling
is cheap, so f...(2) can use it]
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Link: https://lore.kernel.org/r/20240426162042.191916-1-cgoettsche@seltendoof.de
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
CC: x86@kernel.org
CC: linux-alpha@vger.kernel.org
CC: linux-kernel@vger.kernel.org
CC: linux-arm-kernel@lists.infradead.org
CC: linux-ia64@vger.kernel.org
CC: linux-m68k@lists.linux-m68k.org
CC: linux-mips@vger.kernel.org
CC: linux-parisc@vger.kernel.org
CC: linuxppc-dev@lists.ozlabs.org
CC: linux-s390@vger.kernel.org
CC: linux-sh@vger.kernel.org
CC: sparclinux@vger.kernel.org
CC: linux-fsdevel@vger.kernel.org
CC: audit@vger.kernel.org
CC: linux-arch@vger.kernel.org
CC: linux-api@vger.kernel.org
CC: linux-security-module@vger.kernel.org
CC: selinux@vger.kernel.org
[brauner: slight tweaks]
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Fix the indentation of the return values from
generic_ci_validate_strict_name() to properly render the comment and to
address a `make htmldocs` warning:
Documentation/filesystems/api-summary:14: include/linux/fs.h:3504:
WARNING: Bullet list ends without a blank line; unexpected unindent.
Fixes: 0e152beb5aa1 ("libfs: Create the helper function generic_ci_validate_strict_name()")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/lkml/20241030162435.05425f60@canb.auug.org.au/
Signed-off-by: André Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/r/20241101164251.327884-2-andrealmeid@igalia.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Currently MTE is permitted in two circumstances (desiring to use MTE
having been specified by the VM_MTE flag) - where MAP_ANONYMOUS is
specified, as checked by arch_calc_vm_flag_bits() and actualised by
setting the VM_MTE_ALLOWED flag, or if the file backing the mapping is
shmem, in which case we set VM_MTE_ALLOWED in shmem_mmap() when the mmap
hook is activated in mmap_region().
The function that checks that, if VM_MTE is set, VM_MTE_ALLOWED is also
set is the arm64 implementation of arch_validate_flags().
Unfortunately, we intend to refactor mmap_region() to perform this check
earlier, meaning that in the case of a shmem backing we will not have
invoked shmem_mmap() yet, causing the mapping to fail spuriously.
It is inappropriate to set this architecture-specific flag in general mm
code anyway, so a sensible resolution of this issue is to instead move the
check somewhere else.
We resolve this by setting VM_MTE_ALLOWED much earlier in do_mmap(), via
the arch_calc_vm_flag_bits() call.
This is an appropriate place to do this as we already check for the
MAP_ANONYMOUS case here, and the shmem file case is simply a variant of
the same idea - we permit RAM-backed memory.
This requires a modification to the arch_calc_vm_flag_bits() signature to
pass in a pointer to the struct file associated with the mapping, however
this is not too egregious as this is only used by two architectures anyway
- arm64 and parisc.
So this patch performs this adjustment and removes the unnecessary
assignment of VM_MTE_ALLOWED in shmem_mmap().
[akpm@linux-foundation.org: fix whitespace, per Catalin]
Link: https://lkml.kernel.org/r/ec251b20ba1964fb64cf1607d2ad80c47f3873df.1730224667.git.lorenzo.stoakes@oracle.com
Fixes: deb0f6562884 ("mm/mmap: undo ->mmap() when arch_validate_flags() fails")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Reported-by: Jann Horn <jannh@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Helge Deller <deller@gmx.de>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Refactor the map_deny_write_exec() to not unnecessarily require a VMA
parameter but rather to accept VMA flags parameters, which allows us to
use this function early in mmap_region() in a subsequent commit.
While we're here, we refactor the function to be more readable and add
some additional documentation.
Link: https://lkml.kernel.org/r/6be8bb59cd7c68006ebb006eb9d8dc27104b1f70.1730224667.git.lorenzo.stoakes@oracle.com
Fixes: deb0f6562884 ("mm/mmap: undo ->mmap() when arch_validate_flags() fails")
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reported-by: Jann Horn <jannh@google.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Jann Horn <jannh@google.com>
Cc: Andreas Larsson <andreas@gaisler.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Helge Deller <deller@gmx.de>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mark Brown <broonie@kernel.org>
Cc: Peter Xu <peterx@redhat.com>
Cc: Will Deacon <will@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"Where the last set of fixes was mostly drivers, this time the
devicetree changes all come at once, targeting mostly the Rockchips,
Qualcomm and NXP platforms.
The Qualcomm bugfixes target the Snapdragon X Elite laptops,
specifically problems with PCIe and NVMe support to improve
reliability, and a boot regresion on msm8939.
Also for Snapdragon platforms, there are a number of correctness
changes in the several platform specific device drivers, but none of
these are as impactful.
On the NXP i.MX platform, the fixes are all for 64-bit i.MX8 variants,
correcting individual entries in the devicetree that were incorrect
and causing the media, video, mmc and spi drivers to misbehave in
minor ways.
The Arm SCMI firmware driver gets fixes for a use-after-free bug and
for correctly parsing firmware information.
On the RISC-V side, there are three minor devicetree fixes for
starfive and sophgo, again addressing only minor mistakes. One device
driver patch fixes a problem with spurious interrupt handling"
* tag 'arm-fixes-6.12-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (63 commits)
firmware: arm_scmi: Use vendor string in max-rx-timeout-ms
dt-bindings: firmware: arm,scmi: Add missing vendor string
riscv: dts: Replace deprecated snps,nr-gpios property for snps,dw-apb-gpio-port devices
arm64: dts: rockchip: Correct GPIO polarity on brcm BT nodes
arm64: dts: rockchip: Drop invalid clock-names from es8388 codec nodes
ARM: dts: rockchip: Fix the realtek audio codec on rk3036-kylin
ARM: dts: rockchip: Fix the spi controller on rk3036
ARM: dts: rockchip: drop grf reference from rk3036 hdmi
ARM: dts: rockchip: fix rk3036 acodec node
arm64: dts: rockchip: remove orphaned pinctrl-names from pinephone pro
soc: qcom: pmic_glink: Handle GLINK intent allocation rejections
rpmsg: glink: Handle rejected intent request better
arm64: dts: qcom: x1e80100: fix PCIe5 interconnect
arm64: dts: qcom: x1e80100: fix PCIe4 interconnect
arm64: dts: qcom: x1e80100: Fix up BAR spaces
MAINTAINERS: invert Misc RISC-V SoC Support's pattern
soc: qcom: socinfo: fix revision check in qcom_socinfo_probe()
arm64: dts: qcom: x1e80100-qcp: fix nvme regulator boot glitch
arm64: dts: qcom: x1e80100-microsoft-romulus: fix nvme regulator boot glitch
arm64: dts: qcom: x1e80100-yoga-slim7x: fix nvme regulator boot glitch
...
|
|
Support direct I/O atomic writes by producing a single bio with REQ_ATOMIC
flag set.
Initially FSes (XFS) should only support writing a single FS block
atomically.
As with any atomic write, we should produce a single bio which covers the
complete write length.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
[djwong: clarify a couple of things in the docs]
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
|
|
On some devices there are HW dependencies for shared frequency and voltage
between devices. It will impact Energy Aware Scheduler (EAS) decision,
where CPUs share the voltage & frequency domain with other CPUs or devices
e.g.
- Mid CPUs + Big CPU
- Little CPU + L3 cache in DSU
- some other device + Little CPUs
Detailed explanation of one example:
When the L3 cache frequency is increased, the affected Little CPUs might
run at higher voltage and frequency. That higher voltage causes higher CPU
power and thus more energy is used for running the tasks. This is
important for background running tasks, which try to run on energy
efficient CPUs.
Therefore, add performance state limits which are applied for the device
(in this case CPU). This is important on SoCs with HW dependencies
mentioned above so that the Energy Aware Scheduler (EAS) does not use
performance states outside the valid min-max range for energy calculation.
Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/20241030164126.1263793-2-lukasz.luba@arm.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
max_zone_append_sectors differs from all other queue limits in that the
final value used is not stored in the queue_limits but needs to be
obtained using queue_limits_max_zone_append_sectors helper. This not
only adds (tiny) extra overhead to the I/O path, but also can be easily
forgotten in file system code.
Add a new max_hw_zone_append_sectors value to queue_limits which is
set by the driver, and calculate max_zone_append_sectors from that and
the other inputs in blk_validate_zoned_limits, similar to how
max_sectors is calculated to fix this.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241104073955.112324-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Fix the possibility of racing nfs_local_probe() resulting in:
list_add double add: new=ffff8b99707f9f58, prev=ffff8b99707f9f58, next=ffffffffc0f30000.
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:35!
Add nfs_uuid_init() to properly initialize all nfs_uuid_t members
(particularly its list_head).
Switch to returning bool from nfs_uuid_begin(), returns false if
nfs_uuid_t is already in-use (its list_head is on a list). Update
nfs_local_probe() to return early if the nfs_client's cl_uuid
(nfs_uuid_t) is in-use.
Also, switch nfs_uuid_begin() from using list_add_tail_rcu() to
list_add_tail() -- rculist was used in an earlier version of the
localio code that had a lockless nfs_uuid_lookup interface.
Signed-off-by: Mike Snitzer <snitzer@kernel.org>
Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes
Qualcomm driver fixes for v6.12
The Qualcomm EDAC driver's configuration of interrupts is made optional,
to avoid violating security constriants on X Elite platform .
The SCM drivers' detection mechanism for the presence of SHM bridge in QTEE,
is corrected to handle the case where firmware successfully returns that
the interface isn't supported.
The GLINK driver and the PMIC GLINK interface is updated to handle
buffer allocation issues during initialization of the communication
channel.
Allocation error handling in the socinfo dirver is corrected, and then
the fix is corrected.
* tag 'qcom-drivers-fixes-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
soc: qcom: pmic_glink: Handle GLINK intent allocation rejections
rpmsg: glink: Handle rejected intent request better
soc: qcom: socinfo: fix revision check in qcom_socinfo_probe()
firmware: qcom: scm: Return -EOPNOTSUPP for unsupported SHM bridge enabling
EDAC/qcom: Make irq configuration optional
firmware: qcom: scm: fix a NULL-pointer dereference
firmware: qcom: scm: suppress download mode error
soc: qcom: Add check devm_kasprintf() returned value
MAINTAINERS: Qualcomm SoC: Match reserved-memory bindings
Link: https://lore.kernel.org/r/20241101161455.746290-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"17 hotfixes. 9 are cc:stable. 13 are MM and 4 are non-MM.
The usual collection of singletons - please see the changelogs"
* tag 'mm-hotfixes-stable-2024-11-03-10-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: multi-gen LRU: use {ptep,pmdp}_clear_young_notify()
mm: multi-gen LRU: remove MM_LEAF_OLD and MM_NONLEAF_TOTAL stats
mm, mmap: limit THP alignment of anonymous mappings to PMD-aligned sizes
mm: shrinker: avoid memleak in alloc_shrinker_info
.mailmap: update e-mail address for Eugen Hristev
vmscan,migrate: fix page count imbalance on node stats when demoting pages
mailmap: update Jarkko's email addresses
mm: allow set/clear page_type again
nilfs2: fix potential deadlock with newly created symlinks
Squashfs: fix variable overflow in squashfs_readpage_block
kasan: remove vmalloc_percpu test
tools/mm: -Werror fixes in page-types/slabinfo
mm, swap: avoid over reclaim of full clusters
mm: fix PSWPIN counter for large folios swap-in
mm: avoid VM_BUG_ON when try to map an anon large folio to zero page.
mm/codetag: fix null pointer check logic for ref and tag
mm/gup: stop leaking pinned pages in low memory conditions
|
|
When the MM_WALK capability is enabled, memory that is mostly accessed by
a VM appears younger than it really is, therefore this memory will be less
likely to be evicted. Therefore, the presence of a running VM can
significantly increase swap-outs for non-VM memory, regressing the
performance for the rest of the system.
Fix this regression by always calling {ptep,pmdp}_clear_young_notify()
whenever we clear the young bits on PMDs/PTEs.
[jthoughton@google.com: fix link-time error]
Link: https://lkml.kernel.org/r/20241019012940.3656292-3-jthoughton@google.com
Fixes: bd74fdaea146 ("mm: multi-gen LRU: support page table walks")
Signed-off-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: James Houghton <jthoughton@google.com>
Reported-by: David Stevens <stevensd@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Matlack <dmatlack@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Wei Xu <weixugc@google.com>
Cc: <stable@vger.kernel.org>
Cc: kernel test robot <lkp@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Patch series "mm: multi-gen LRU: Have secondary MMUs participate in
MM_WALK".
Today, the MM_WALK capability causes MGLRU to clear the young bit from
PMDs and PTEs during the page table walk before eviction, but MGLRU does
not call the clear_young() MMU notifier in this case. By not calling this
notifier, the MM walk takes less time/CPU, but it causes pages that are
accessed mostly through KVM / secondary MMUs to appear younger than they
should be.
We do call the clear_young() notifier today, but only when attempting to
evict the page, so we end up clearing young/accessed information less
frequently for secondary MMUs than for mm PTEs, and therefore they appear
younger and are less likely to be evicted. Therefore, memory that is
*not* being accessed mostly by KVM will be evicted *more* frequently,
worsening performance.
ChromeOS observed a tab-open latency regression when enabling MGLRU with a
setup that involved running a VM:
Tab-open latency histogram (ms)
Version p50 mean p95 p99 max
base 1315 1198 2347 3454 10319
mglru 2559 1311 7399 12060 43758
fix 1119 926 2470 4211 6947
This series replaces the final non-selftest patchs from this series[1],
which introduced a similar change (and a new MMU notifier) with KVM
optimizations. I'll send a separate series (to Sean and Paolo) for the
KVM optimizations.
This series also makes proactive reclaim with MGLRU possible for KVM
memory. I have verified that this functions correctly with the selftest
from [1], but given that that test is a KVM selftest, I'll send it with
the rest of the KVM optimizations later. Andrew, let me know if you'd
like to take the test now anyway.
[1]: https://lore.kernel.org/linux-mm/20240926013506.860253-18-jthoughton@google.com/
This patch (of 2):
The removed stats, MM_LEAF_OLD and MM_NONLEAF_TOTAL, are not very helpful
and become more complicated to properly compute when adding
test/clear_young() notifiers in MGLRU's mm walk.
Link: https://lkml.kernel.org/r/20241019012940.3656292-1-jthoughton@google.com
Link: https://lkml.kernel.org/r/20241019012940.3656292-2-jthoughton@google.com
Fixes: bd74fdaea146 ("mm: multi-gen LRU: support page table walks")
Signed-off-by: Yu Zhao <yuzhao@google.com>
Signed-off-by: James Houghton <jthoughton@google.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Matlack <dmatlack@google.com>
Cc: David Rientjes <rientjes@google.com>
Cc: David Stevens <stevensd@google.com>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: Wei Xu <weixugc@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a fix for regression in input core introduced in 6.11 preventing
re-registering input handlers
- a fix for adp5588-keys driver tyring to disable interrupt 0 at
suspend when devices is used without interrupt
- a fix for edt-ft5x06 to stop leaking regmap structure when probing
fails and to make sure it is not released too early on removal.
* tag 'input-for-v6.12-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: fix regression when re-registering input handlers
Input: adp5588-keys - do not try to disable interrupt 0
Input: edt-ft5x06 - fix regmap leak when probe fails
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"A single fix for posix CPU timers.
When a thread is cloned, the posix CPU timers are not inherited.
If the parent has a CPU timer armed the corresponding tick dependency
in the tasks tick_dep_mask is set and copied to the new thread, which
means the new thread and all decendants will prevent the system to go
into full NOHZ operation.
Clear the tick dependency mask in copy_process() to fix this"
* tag 'timers-urgent-2024-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-cpu-timers: Clear TICK_DEP_BIT_POSIX_TIMER on clone
|
|
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
fdget_pos() for constructor, fdput_pos() for cleanup, all users of
fd..._pos() converted trivially.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
the only call site (in do_mq_notify()) obtains the argument
from an immediately preceding fdget() and it is immediately
followed by fdput(); might as well just replace it with
a variant that would take a descriptor instead of struct file *
and have file lookups handled inside that function.
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
The important part in sockfd_lookup_light() is avoiding needless
file refcount operations, not the marginal reduction of the register
pressure from not keeping a struct file pointer in the caller.
Switch to use fdget()/fdpu(); with sane use of CLASS(fd) we can
get a better code generation...
Would be nice if somebody tested it on networking test suites
(including benchmarks)...
sockfd_lookup_light() does fdget(), uses sock_from_file() to
get the associated socket and returns the struct socket reference to
the caller, along with "do we need to fput()" flag. No matching fdput(),
the caller does its equivalent manually, using the fact that sock->file
points to the struct file the socket has come from.
Get rid of that - have the callers do fdget()/fdput() and
use sock_from_file() directly. That kills sockfd_lookup_light()
and fput_light() (no users left).
What's more, we can get rid of explicit fdget()/fdput() by
switching to CLASS(fd, ...) - code generation does not suffer, since
now fdput() inserted on "descriptor is not opened" failure exit
is recognized to be a no-op by compiler.
[folded a fix for braino in do_recvmmsg() caught by Simon Horman]
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
|
|
Commit d469647bafd9 ("Input: simplify event handling logic") introduced
code that would set handler->events() method to either
input_handler_events_filter() or input_handler_events_default() or
input_handler_events_null(), depending on the kind of input handler
(a filter or a regular one) we are dealing with. Unfortunately this
breaks cases when we try to re-register the same filter (as is the case
with sysrq handler): after initial registration the handler will have 2
event handling methods defined, and will run afoul of the check in
input_handler_check_methods():
input: input_handler_check_methods: only one event processing method can be defined (sysrq)
sysrq: Failed to register input handler, error -22
Fix this by adding handle_events() method to input_handle structure and
setting it up when registering a new input handle according to event
handling methods defined in associated input_handler structure, thus
avoiding modifying the input_handler structure.
Reported-by: "Ned T. Crigler" <crigler@gmail.com>
Reported-by: Christian Heusel <christian@heusel.eu>
Tested-by: "Ned T. Crigler" <crigler@gmail.com>
Tested-by: Peter Seiderer <ps.report@gmx.net>
Fixes: d469647bafd9 ("Input: simplify event handling logic")
Link: https://lore.kernel.org/r/Zx2iQp6csn42PJA7@xavtug
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
|
|
A new hybrid poll is implemented on the io_uring layer. Once an IO is
issued, it will not poll immediately, but rather block first and re-run
before IO complete, then poll to reap IO. While this poll method could
be a suboptimal solution when running on a single thread, it offers
performance lower than regular polling but higher than IRQ, and CPU
utilization is also lower than polling.
To use hybrid polling, the ring must be setup with both the
IORING_SETUP_IOPOLL and IORING_SETUP_HYBRID)IOPOLL flags set. Hybrid
polling has the same restrictions as IOPOLL, in that commands must
explicitly support it.
Signed-off-by: hexue <xue01.he@samsung.com>
Link: https://lore.kernel.org/r/20241101091957.564220-2-xue01.he@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Currently cloning a buffer table will fail if the destination already has
a table. But it should be possible to use it to replace existing elements.
Add a IORING_REGISTER_DST_REPLACE cloning flag, which if set, will allow
the destination to already having a buffer table. If that is the case,
then entries designated by offset + nr buffers will be replaced if they
already exist.
Note that it's allowed to use IORING_REGISTER_DST_REPLACE and not have
an existing table, in which case it'll work just like not having the
flag set and an empty table - it'll just assign the newly created table
for that case.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Right now buffer cloning is an all-or-nothing kind of thing - either the
whole table is cloned from a source to a destination ring, or nothing at
all.
However, it's not always desired to clone the whole thing. Allow for
the application to specify a source and destination offset, and a
number of buffers to clone. If the destination offset is non-zero, then
allocate sparse nodes upfront.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
For files, there's nr_user_files/file_table/file_data, and buffers have
nr_user_bufs/user_bufs/buf_data. There's no reason why file_table and
file_data can't be the same thing, and ditto for the buffer side. That
gets rid of more io_ring_ctx state that's in two spots rather than just
being in one spot, as it should be. Put all the registered file data in
one locations, and ditto on the buffer front.
This also avoids having both io_rsrc_data->nodes being an allocated
array, and ->user_bufs[] or ->file_table.nodes. There's no reason to
have this information duplicated. Keep it in one spot, io_rsrc_data,
along with how many resources are available.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
It's not going to be needed in the fast path going forward, so kill it
off.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Work in progress, but get rid of the per-ring serialization of resource
nodes, like registered buffers and files. Main issue here is that one
node can otherwise hold up a bunch of other nodes from getting freed,
which is especially a problem for file resource nodes and networked
workloads where some descriptors may not see activity in a long time.
As an example, instantiate an io_uring ring fd and create a sparse
registered file table. Even 2 will do. Then create a socket and register
it as fixed file 0, F0. The number of open files in the app is now 5,
with 0/1/2 being the usual stdin/out/err, 3 being the ring fd, and 4
being the socket. Register this socket (eg "the listener") in slot 0 of
the registered file table. Now add an operation on the socket that uses
slot 0. Finally, loop N times, where each loop creates a new socket,
registers said socket as a file, then unregisters the socket, and
finally closes the socket. This is roughly similar to what a basic
accept loop would look like.
At the end of this loop, it's not unreasonable to expect that there
would still be 5 open files. Each socket created and registered in the
loop is also unregistered and closed. But since the listener socket
registered first still has references to its resource node due to still
being active, each subsequent socket unregistration is stuck behind it
for reclaim. Hence 5 + N files are still open at that point, where N is
awaiting the final put held up by the listener socket.
Rewrite the io_rsrc_node handling to NOT rely on serialization. Struct
io_kiocb now gets explicit resource nodes assigned, with each holding a
reference to the parent node. A parent node is either of type FILE or
BUFFER, which are the two types of nodes that exist. A request can have
two nodes assigned, if it's using both registered files and buffers.
Since request issue and task_work completion is both under the ring
private lock, no atomics are needed to handle these references. It's a
simple unlocked inc/dec. As before, the registered buffer or file table
each hold a reference as well to the registered nodes. Final put of the
node will remove the node and free the underlying resource, eg unmap the
buffer or put the file.
Outside of removing the stall in resource reclaim described above, it
has the following advantages:
1) It's a lot simpler than the previous scheme, and easier to follow.
No need to specific quiesce handling anymore.
2) There are no resource node allocations in the fast path, all of that
happens at resource registration time.
3) The structs related to resource handling can all get simplified
quite a bit, like io_rsrc_node and io_rsrc_data. io_rsrc_put can
go away completely.
4) Handling of resource tags is much simpler, and doesn't require
persistent storage as it can simply get assigned up front at
registration time. Just copy them in one-by-one at registration time
and assign to the resource node.
The only real downside is that a request is now explicitly limited to
pinning 2 resources, one file and one buffer, where before just
assigning a resource node to a request would pin all of them. The upside
is that it's easier to follow now, as an individual resource is
explicitly referenced and assigned to the request.
With this in place, the above mentioned example will be using exactly 5
files at the end of the loop, not N.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
If an error indicating that the device needs to be reset is reported,
disable the error reporting before device reset is complete,
enable the error reporting after the reset is complete to prevent
the same error from being reported repeatedly.
Fixes: eaebf4c3b103 ("crypto: hisilicon - Unify hardware error init/uninit into QM")
Signed-off-by: Weili Qian <qianweili@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Query the capability register status of accelerator devices
(SEC, HPRE and ZIP) through the debugfs interface, for example:
cat cap_regs. The purpose is to improve the robustness and
locability of hardware devices and drivers.
Signed-off-by: Qi Tao <taoqi10@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
encrypt_blob(), decrypt_blob() and create_signature() were some of the
functions added in 2018 by
commit 5a30771832aa ("KEYS: Provide missing asymmetric key subops for new
key type ops [ver #2]")
however, they've not been used.
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Pull drm fixes from Dave Airlie:
"Regular fixes pull, nothing too out of the ordinary, the mediatek
fixes came in a batch that I might have preferred a bit earlier but
all seem fine, otherwise regular xe/amdgpu and a few misc ones.
xe:
- Fix missing HPD interrupt enabling, bringing one PM refactor with it
- Workaround LNL GGTT invalidation not being visible to GuC
- Avoid getting jobs stuck without a protecting timeout
ivpu:
- Fix firewall IRQ handling
panthor:
- Fix firmware initialization wrt page sizes
- Fix handling and reporting of dead job groups
sched:
- Guarantee forward progress via WC_MEM_RECLAIM
tests:
- Fix memory leak in drm_display_mode_from_cea_vic()
amdgpu:
- DCN 3.5 fix
- Vangogh SMU KASAN fix
- SMU 13 profile reporting fix
mediatek:
- Fix degradation problem of alpha blending
- Fix color format MACROs in OVL
- Fix get efuse issue for MT8188 DPTX
- Fix potential NULL dereference in mtk_crtc_destroy()
- Correct dpi power-domains property
- Add split subschema property constraints"
* tag 'drm-fixes-2024-11-02' of https://gitlab.freedesktop.org/drm/kernel: (27 commits)
drm/xe: Don't short circuit TDR on jobs not started
drm/xe: Add mmio read before GGTT invalidate
drm/tests: hdmi: Fix memory leaks in drm_display_mode_from_cea_vic()
drm/connector: hdmi: Fix memory leak in drm_display_mode_from_cea_vic()
drm/tests: helpers: Add helper for drm_display_mode_from_cea_vic()
drm/panthor: Report group as timedout when we fail to properly suspend
drm/panthor: Fail job creation when the group is dead
drm/panthor: Fix firmware initialization on systems with a page size > 4k
accel/ivpu: Fix NOC firewall interrupt handling
drm/xe/display: Add missing HPD interrupt enabling during non-d3cold RPM resume
drm/xe/display: Separate the d3cold and non-d3cold runtime PM handling
drm/xe: Remove runtime argument from display s/r functions
drm/amdgpu/smu13: fix profile reporting
drm/amd/pm: Vangogh: Fix kernel memory out of bounds write
Revert "drm/amd/display: update DML2 policy EnhancedPrefetchScheduleAccelerationFinal DCN35"
drm/sched: Mark scheduler work queues with WQ_MEM_RECLAIM
drm/tegra: Fix NULL vs IS_ERR() check in probe()
dt-bindings: display: mediatek: split: add subschema property constraints
dt-bindings: display: mediatek: dpi: correct power-domains property
drm/mediatek: Fix potential NULL dereference in mtk_crtc_destroy()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fixes from Ira Weiny:
"The bulk of these fixes center around an initialization order bug
reported by Gregory Price and some additional fall out from the
debugging effort.
In summary, cxl_acpi and cxl_mem race and previously worked because of
a bus_rescan_devices() while testing without modules built in.
Unfortunately with modules built in the rescan would fail due to the
cxl_port driver being registered late via the build order. Furthermore
it was found bus_rescan_devices() did not guarantee a probe barrier
which CXL was expecting. Additional fixes to cxl-test and decoder
allocation came along as they were found in this debugging effort.
The other fixes are pretty minor but one affects trace point data seen
by user space.
Summary:
- Fix crashes when running with cxl-test code
- Fix Trace DRAM Event Record field decodes
- Fix module/built in initialization order errors
- Fix use after free on decoder shutdowns
- Fix out of order decoder allocations
- Improve cxl-test to better reflect real world systems"
* tag 'cxl-fixes-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/test: Improve init-order fidelity relative to real-world systems
cxl/port: Prevent out-of-order decoder allocation
cxl/port: Fix use-after-free, permit out-of-order decoder shutdown
cxl/acpi: Ensure ports ready at cxl_acpi_probe() return
cxl/port: Fix cxl_bus_rescan() vs bus_rescan_devices()
cxl/port: Fix CXL port initialization order when the subsystem is built-in
cxl/events: Fix Trace DRAM Event Record
cxl/core: Return error when cxl_endpoint_gather_bandwidth() handles a non-PCI device
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"Make the ACPI CPPC library use a raw spinlock for operations carried
out in scheduler context via the schedutil governor and the ACPI CPPC
cpufreq driver (Pierre Gondois)"
* tag 'acpi-6.12-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: CPPC: Make rmw_lock a raw_spin_lock
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"The important one is a change to the way in which we handle protection
keys around signal delivery so that we're more closely aligned with
the x86 behaviour, however there is also a revert of the previous fix
to disable software tag-based KASAN with GCC, since a workaround
materialised shortly afterwards.
I'd love to say we're done with 6.12, but we're aware of some
longstanding fpsimd register corruption issues that we're almost at
the bottom of resolving.
Summary:
- Fix handling of POR_EL0 during signal delivery so that pushing the
signal context doesn't fail based on the pkey configuration of the
interrupted context and align our user-visible behaviour with that
of x86.
- Fix a bogus pointer being passed to the CPU hotplug code from the
Arm SDEI driver.
- Re-enable software tag-based KASAN with GCC by using an alternative
implementation of '__no_sanitize_address'"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: signal: Improve POR_EL0 handling to avoid uaccess failures
firmware: arm_sdei: Fix the input parameter of cpuhp_remove_state()
Revert "kasan: Disable Software Tag-Based KASAN with GCC"
kasan: Fix Software Tag-Based KASAN with GCC
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull iomap fixes from Christian Brauner:
"Fixes for iomap to prevent data corruption bugs in the fallocate
unshare range implementation of fsdax and a small cleanup to turn
iomap_want_unshare_iter() into an inline function"
* tag 'vfs-6.12-rc6.iomap' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs:
iomap: turn iomap_want_unshare_iter into an inline function
fsdax: dax_unshare_iter needs to copy entire blocks
fsdax: remove zeroing code from dax_unshare_iter
iomap: share iomap_unshare_iter predicate code with fsdax
xfs: don't allocate COW extents when unsharing a hole
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull filesystem fixes from Christian Brauner:
"VFS:
- Fix copy_page_from_iter_atomic() if KMAP_LOCAL_FORCE_MAP=y is set
- Add a get_tree_bdev_flags() helper that allows to modify e.g.,
whether errors are logged into the filesystem context during
superblock creation. This is used by erofs to fix a userspace
regression where an error is currently logged when its used on a
regular file which is an new allowed mode in erofs.
netfs:
- Fix the sysfs debug path in the documentation.
- Fix iov_iter_get_pages*() for folio queues by skipping the page
extracation if we're at the end of a folio.
afs:
- Fix moving subdirectories to different parent directory.
autofs:
- Fix handling of AUTOFS_DEV_IOCTL_TIMEOUT_CMD ioctl in
validate_dev_ioctl(). The actual ioctl number, not the ioctl
command needs to be checked for autofs"
* tag 'vfs-6.12-rc6.fixes' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs:
iov_iter: fix copy_page_from_iter_atomic() if KMAP_LOCAL_FORCE_MAP
autofs: fix thinko in validate_dev_ioctl()
iov_iter: Fix iov_iter_get_pages*() for folio_queue
afs: Fix missing subdir edit when renamed between parent dirs
doc: correcting the debug path for cachefiles
erofs: use get_tree_bdev_flags() to avoid misleading messages
fs/super.c: introduce get_tree_bdev_flags()
|
