| Age | Commit message (Collapse) | Author |
|---|
|
Remove the platform data fields that nobody uses.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
EXPORT_SYMBOL from assembly code produces an unused symbol __kcrctab_*.
kcrctab is used as a section name (prefixed with three underscores),
but never used as a symbol.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
For EXPORT_SYMBOL from C files, <linux/export.h> defines __ksymtab_*
as local symbols.
For EXPORT_SYMBOL from assembly, in contrast, <asm-generic/export.h>
produces globally-visible __ksymtab_* symbols due to this .globl
directive.
I do not know why this must be global. It still works without this.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
Quota statistics counted as 64-bit per-cpu counter. Reading sums per-cpu
fractions as signed 64-bit int, filters negative values and then reports
lower half as signed 32-bit int.
Result may looks like:
fs.quota.allocated_dquots = 22327
fs.quota.cache_hits = -489852115
fs.quota.drops = -487288718
fs.quota.free_dquots = 22083
fs.quota.lookups = -486883485
fs.quota.reads = 22327
fs.quota.syncs = 335064
fs.quota.writes = 3088689
Values bigger than 2^31-1 reported as negative.
All counters except "allocated_dquots" and "free_dquots" are monotonic,
thus they should be reported as is without filtering negative values.
Kernel doesn't have generic helper for 64-bit sysctl yet,
let's use at least unsigned long.
Link: https://lore.kernel.org/r/157337934693.2078.9842146413181153727.stgit@buzz
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: Jan Kara <jack@suse.cz>
|
|
As seen on the new Raspberry Pi 4 and sta2x11's DMA implementation it is
possible for a device configured with 32 bit DMA addresses and a partial
DMA mapping located at the end of the address space to overflow. It
happens when a higher physical address, not DMAable, is translated to
it's DMA counterpart.
For example the Raspberry Pi 4, configurable up to 4 GB of memory, has
an interconnect capable of addressing the lower 1 GB of physical memory
with a DMA offset of 0xc0000000. It transpires that, any attempt to
translate physical addresses higher than the first GB will result in an
overflow which dma_capable() can't detect as it only checks for
addresses bigger then the maximum allowed DMA address.
Fix this by verifying in dma_capable() if the DMA address range provided
is at any point lower than the minimum possible DMA address on the bus.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
|
|
For dma-direct we know that the DMA address is an encoding of the
physical address that we can trivially decode. Use that fact to
provide implementations that do not need the arch_dma_coherent_to_pfn
architecture hook. Note that we still can only support mmap of
non-coherent memory only if the architecture provides a way to set an
uncached bit in the page tables. This must be true for architectures
that use the generic remap helpers, but other architectures can also
manually select it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
|
|
There is a distinct version of the Ux500 U8420 variant
with "sysclk", as can be seen from the vendor code that
didn't make it upstream, this firmware lacks the
ULPPLL (ultra-low power phase locked loop) which in
effect means that the timer clock is instead wired to
the 32768 Hz always-on clock.
This has some repercussions when enabling the timer
clock as the code as it stands will disable the timer
clock on these platforms (lacking the so-called
"doze mode") and obtaining the wrong rate of the timer
clock.
The timer frequency is of course needed very early in
the boot, and as a consequence, we need to shuffle
around the early PRCMU init code: whereas in the past
we did not need to look up the PRCMU firmware version
in the early init, but now we need to know the version
before the core system timers are registered so we
restructure the platform callbacks to the PRCMU so as
not to take any arguments and instead look up the
resources it needs directly from the device tree
when initializing.
As we do not yet support any platforms using this
firmware it is not a regression, but as PostmarketOS
is starting to support products with this firmware we
need to fix this up.
The low rate of 32kHz also makes the MTU timer unsuitable
as delay timer but this needs to be fixed in a separate
patch.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
The MFD implementation for reference counting was complex and unnecessary.
There was only one bona fide user which has now been converted to handle
the process in a different way. Any future resource protection, shared
enablement functions should be handed by the parent device, rather than
through the MFD subsystem API.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
|
|
Providing a subsystem-level API helper seems over-kill just to save a
few lines of C-code. Previous commits saw us convert mfd_clone_cell()'s
only user over to use a more traditional style of MFD child-device
registration. Now we can remove the superfluous helper from the MFD API.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org>
|
|
Add the ability to get the clock for each clock input pin of the chip
and enable MCLK2 since that is expected to be a permanently enabled
32kHz clock.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Save a few bytes by removing some registers from the driver that are not
currently used and not intended to be used at any point in the future.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Use a local variable to ensure correct endian types for
intermediate results.
Identified by sparse when building the IIO driver.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
regmap_add_irq_chip() will try to allocate all of the IRQ descriptors
upfront if passed a non-zero irq_base parameter. However, the intention
is to allocate IRQ descriptors on an as-needed basis if possible. Pass 0
instead of -1 to fix that use-case.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Laxman Dewangan <ldewangan@nvidia.com>
Tested-by: Laxman Dewangan <ldewangan@nvidia.com>
|
|
The Rockchip PMIC driver can automatically detect connected component
versions by reading the ID_MSB and ID_LSB registers. The probe function
will always fail with RK818 PMICs because the ID_MSK is 0xFFF0 and the
RK818 template ID is 0x8181.
This patch changes this value to 0x8180.
Fixes: 9d6105e19f61 ("mfd: rk808: Fix up the chip id get failed")
Cc: stable@vger.kernel.org
Cc: Elaine Zhang <zhangqing@rock-chips.com>
Cc: Joseph Chen <chenjh@rock-chips.com>
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
into ibs-for-mfd-merged
|
|
Implement a resource managed strongly uncachable ioremap function.
Cc: <stable@vger.kernel.org> # v4.19+
Tested-by: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Tuowen Zhao <ztuowen@gmail.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
|
|
Now that all users have been converted, we can drop snd_dma_pci_data()
macro definition.
Link: https://lore.kernel.org/r/20191108164637.1110-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
We need to convert flags to atomic_t in order to later fix an ordering
issue on atomic_cmpxchg() failure. This will allow us to use atomic_fetch_or().
Also clarify the nature of those flags.
[ mingo: Converted two more usage site the original patch missed. ]
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E . McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20191108160858.31665-2-frederic@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Rename macronix_quad_enable() to a generic name:
spi_nor_sr1_bit6_quad_enable().
Prepend "spi_nor_" to "sr2_bit7_quad_enable". All SPI NOR generic
methods should be prepended by "spi_nor_".
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
JEDEC Basic Flash Parameter Table, 15th DWORD, bits 22:20,
refers to this bit as "bit 1 of the status register 2".
Rename the macro accordingly.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
spi_nor_unlock() unlocks blocks of memory or the entire flash memory
array, if requested. clear_sr_bp() unlocks the entire flash memory
array at boot time. This calls for some unification, clear_sr_bp() is
just an optimization for the case when the unlock request covers the
entire flash size.
Get rid of clear_sr_bp() and introduce spi_nor_unlock_all(), which is
just a call to spi_nor_unlock() for the entire flash memory array.
This fixes a bug that was present in spi_nor_spansion_clear_sr_bp().
When the QE bit was zero, we used the Write Status (01h) command with
one data byte, which might cleared the Status Register 2. We now always
use the Write Status (01h) command with two data bytes when
SNOR_F_HAS_16BIT_SR is set, to avoid clearing the Status Register 2.
The SNOR_F_NO_READ_CR case is treated as well. When the flash doesn't
support the CR Read command, we make an assumption about the value of
the QE bit. In spi_nor_init(), call spi_nor_quad_enable() first, then
spi_nor_unlock_all(), so that at the spi_nor_unlock_all() time we can
be sure the QE bit has value one, because of the previous call to
spi_nor_quad_enable().
Get rid of the MFR handling and implement specific manufacturer
default_init() fixup hooks.
Note that this changes a bit the logic for the SNOR_MFR_ATMEL,
SNOR_MFR_INTEL and SNOR_MFR_SST cases. Before this patch, the Atmel,
Intel and SST chips did not set the locking ops, but unlocked the entire
flash at boot time, while now they are setting the locking ops to
stm_locking_ops. This should work, since the disable of the block
protection at the boot time used the same Status Register bits to unlock
the flash, as in the stm_locking_ops case.
Suggested-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
Make sure that when doing a lock() or an unlock() operation we don't clear
the QE bit from Status Register 2.
JESD216 revB or later offers information about the *default* Status
Register commands to use (see BFPT DWORDS[15], bits 22:20). In this
standard, Status Register 1 refers to the first data byte transferred on a
Read Status (05h) or Write Status (01h) command. Status register 2 refers
to the byte read using instruction 35h. Status register 2 is the second
byte transferred in a Write Status (01h) command.
Industry naming and definitions of these Status Registers may differ.
The definitions are described in JESD216B, BFPT DWORDS[15], bits 22:20.
There are cases in which writing only one byte to the Status Register 1
has the side-effect of clearing Status Register 2 and implicitly the Quad
Enable bit. This side-effect is hit just by the
BFPT_DWORD15_QER_SR2_BIT1_BUGGY and BFPT_DWORD15_QER_SR2_BIT1 cases.
Suggested-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt
arm64: dts: Amlogic updates for v5.5
Hightlights
- new board; ugoos am6, based on G12B SoC
- g12: add thermal driver and cooling properties
- sm1: enable audio on SEI610 board
- IR: add several keymaps
- sdio: add keep-power-in-suspend property for multiple boards
- pcie: add support for G12A
- multiple fixes, cleanups
* tag 'amlogic-dt64' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: (62 commits)
arm64: dts: meson-gx: fix i2c compatible
arm64: dts: meson-gx: cec node should be disabled by default
arm64: dts: meson-g12b-odroid-n2: add missing amlogic, s922x compatible
arm64: dts: meson-gxm: fix gpu irq order
arm64: dts: meson-g12a: fix gpu irq order
ARM64: dts: amlogic: adds crypto hardware node
arm64: dts: meson-gxbb-vega-s95: set rc-vega-s9x ir keymap
arm64: dts: meson-gxm-vega-s96: set rc-vega-s9x ir keymap
arm64: dts: meson: g12b: add cooling properties
arm64: dts: meson: g12a: add cooling properties
arm64: dts: meson: g12: Add minimal thermal zone
arm64: dts: meson: g12: add temperature sensor
arm64: dts: meson: sei610: enable audio
arm64: dts: meson: sm1: add audio devices
dt-bindings: clock: meson: add sm1 resets to the axg-audio controller
dt-bindings: clk: axg-audio: add sm1 bindings
arm64: dts: meson-g12: add support for simplefb
arm64: dts: meson: g12a: add audio devices resets
arm64: dts: meson: odroid-c2: Add missing regulator linked to HDMI supply
arm64: dts: meson: odroid-c2: Add missing regulator linked to VDDIO_AO3V3 regulator
...
Link: https://lore.kernel.org/r/7hd0dzs0m1.fsf@baylibre.com
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/drivers
soc: amlogic: updates for v5.5
Highlights
- socinfo: more SoC IDs
- firmware: misc secure-monitor cleanups
* tag 'amlogic-drivers' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
soc: amlogic: meson-gx-socinfo: Fix S905D3 ID for VIM3L
soc: amlogic: meson-gx-socinfo: Add S905X3 ID for VIM3L
soc: amlogic: meson-gx-socinfo: Add A1 and A113L IDs
firmware: meson_sm: use %*ph to print small buffer
firmware: meson_sm: Rework driver as a proper platform driver
nvmem: meson-efuse: bindings: Add secure-monitor phandle
firmware: meson_sm: Mark chip struct as static const
Link: https://lore.kernel.org/r/7hftivs11f.fsf@baylibre.com
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
We need the char/misc driver fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We want the staging fixes in here, and it resolves some merge issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
On some SoCs the Adaptive Voltage Scaling (AVS) technique is
employed to optimize the operating voltage of a device. At a
given frequency, the hardware monitors dynamic factors and either
makes a suggestion for how much to adjust a voltage for the
current frequency, or it automatically adjusts the voltage
without software intervention. Add an API to the OPP library for
the former case, so that AVS type devices can update the voltages
for an OPP when the hardware determines the voltage should
change. The assumption is that drivers like CPUfreq or devfreq
will register for the OPP notifiers and adjust the voltage
according to suggestions that AVS makes.
This patch is derived from [1] submitted by Stephen.
[1] https://lore.kernel.org/patchwork/patch/599279/
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
[Roger Lu: Changed to rcu less implementation]
Signed-off-by: Roger Lu <roger.lu@mediatek.com>
[s.nawrocki@samsung.com: added handling of OPP min/max voltage]
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Olof Johansson:
"A set of fixes that have trickled in over the last couple of weeks:
- MAINTAINER update for Cavium/Marvell ThunderX2
- stm32 tweaks to pinmux for Joystick/Camera, and RAM allocation for
CAN interfaces
- i.MX fixes for voltage regulator GPIO mappings, fixes voltage
scaling issues
- More i.MX fixes for various issues on i.MX eval boards: interrupt
storm due to u-boot leaving pins in new states, fixing power button
config, a couple of compatible-string corrections.
- Powerdown and Suspend/Resume fixes for Allwinner A83-based tablets
- A few documentation tweaks and a fix of a memory leak in the reset
subsystem"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
MAINTAINERS: update Cavium ThunderX2 maintainers
ARM: dts: stm32: change joystick pinctrl definition on stm32mp157c-ev1
ARM: dts: stm32: remove OV5640 pinctrl definition on stm32mp157c-ev1
ARM: dts: stm32: Fix CAN RAM mapping on stm32mp157c
ARM: dts: stm32: relax qspi pins slew-rate for stm32mp157
arm64: dts: zii-ultra: fix ARM regulator GPIO handle
ARM: sunxi: Fix CPU powerdown on A83T
ARM: dts: sun8i-a83t-tbs-a711: Fix WiFi resume from suspend
arm64: dts: imx8mn: fix compatible string for sdma
arm64: dts: imx8mm: fix compatible string for sdma
reset: fix reset_control_ops kerneldoc comment
ARM: dts: imx6-logicpd: Re-enable SNVS power key
soc: imx: gpc: fix initialiser format
ARM: dts: imx6qdl-sabreauto: Fix storm of accelerometer interrupts
arm64: dts: ls1028a: fix a compatible issue
reset: fix reset_control_get_exclusive kerneldoc comment
reset: fix reset_control_lookup kerneldoc comment
reset: fix of_reset_control_get_count kerneldoc comment
reset: fix of_reset_simple_xlate kerneldoc comment
reset: Fix memory leak in reset_control_array_put()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Thomas Gleixner:
"A small set of fixes for timekeepoing and clocksource drivers:
- VDSO data was updated conditional on the availability of a VDSO
capable clocksource. This causes the VDSO functions which do not
depend on a VDSO capable clocksource to operate on stale data.
Always update unconditionally.
- Prevent a double free in the mediatek driver
- Use the proper helper in the sh_mtu2 driver so it won't attempt to
initialize non-existing interrupts"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timekeeping/vsyscall: Update VDSO data unconditionally
clocksource/drivers/sh_mtu2: Do not loop using platform_get_irq_by_name()
clocksource/drivers/mediatek: Fix error handling
|
|
The same behaviour can be obtained by using the IRQCHIP_MASK_ON_SUSPEND
flag on the IRQ chip.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/1570015525-27018-2-git-send-email-zhouyanjie@zoho.com
|
|
Now that we have a copy of TYPER in the ITS structure, rely on this
to provide the same service as its->device_ids, which gets axed.
Errata workarounds are now updating the cached fields instead of
requiring a separate field in the ITS structure.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20191027144234.8395-7-maz@kernel.org
Link: https://lore.kernel.org/r/20191108165805.3071-7-maz@kernel.org
|
|
Now that we have a copy of TYPER in the ITS structure, rely on this
to provide the same service as its->ite_size, which gets axed.
Errata workarounds are now updating the cached fields instead of
requiring a separate field in the ITS structure.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20191027144234.8395-6-maz@kernel.org
Link: https://lore.kernel.org/r/20191108165805.3071-6-maz@kernel.org
|
|
There never has been such function edac_raw_error_desc_clean() and in
function ghes_edac_report_mem_error() the whole struct is zero'ed
including the string arrays. Remove that comment.
Signed-off-by: Robert Richter <rrichter@marvell.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20191106093239.25517-9-rrichter@marvell.com
|
|
Introduce an mci_for_each_dimm() iterator. It returns a pointer to
a struct dimm_info. This makes the declaration and use of an index
obsolete and avoids access to internal data of struct mci (direct array
access etc).
[ bp: push the struct dimm_info *dimm; declaration into the
CONFIG_EDAC_DEBUG block. ]
Signed-off-by: Robert Richter <rrichter@marvell.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20191106093239.25517-4-rrichter@marvell.com
|
|
This removes '\n' from trace event class tcp_event_sk_skb to avoid
redundant new blank line and make output compact.
Fixes: af4325ecc24f ("tcp: expose sk_state in tcp_retransmit_skb tracepoint")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Tony Lu <tonylu@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
There is a race between driver code that does setup/cleanup of device
and devlink reload operation that in some drivers works with the same
code. Use after free could we easily obtained by running:
while true; do
echo "0000:00:10.0" >/sys/bus/pci/drivers/mlxsw_spectrum2/bind
devlink dev reload pci/0000:00:10.0 &
echo "0000:00:10.0" >/sys/bus/pci/drivers/mlxsw_spectrum2/unbind
done
Fix this by enabling reload only after setup of device is complete and
disabling it at the beginning of the cleanup process.
Reported-by: Ido Schimmel <idosch@mellanox.com>
Fixes: 2d8dc5bbf4e7 ("devlink: Add support for reload")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current upstream interface is an all-or-nothing, which is
sub-optimal for future changes, as it doesn't allow the upstream driver
to prepare for the SFP module becoming available, as it is at boot.
Switch to a find-sfp-bus, add-upstream, del-upstream, put-sfp-bus
interface structure instead, which allows the upstream driver to
prepare for a module being available as soon as add-upstream is called.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
One conflict in the BPF samples Makefile, some fixes in 'net' whilst
we were converting over to Makefile.target rules in 'net-next'.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The helper is no longer referred after the recent code refactoring.
Drop the export for saving some bits and future misuse.
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20191108094641.20086-9-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-next
Vinod writes:
soundwire updates for v5.5-rc1
This round we have bunch of core and Intel driver updates spearheaded
by Pierre
Details
- Update unique id checks in core and ACPI helpers
- Improvements to to Intel driver and cadence lib
* tag 'soundwire-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: ignore uniqueID when irrelevant
soundwire: slave: add helper to extract slave ID
soundwire: remove bitfield for unique_id, use u8
soundwire: intel: fix PDI/stream mapping for Bulk
soundwire: cadence_master: make clock stop exit configurable on init
soundwire: intel/cadence: add flag for interrupt enable
soundwire: intel: add helper for initialization
soundwire: cadence_master: add hw_reset capability in debugfs
soundwire: intel/cadence: fix startup sequence
soundwire: intel: use correct header for io calls
soundwire: cadence_master: improve PDI allocation
soundwire: intel: don't filter out PDI0/1
soundwire: cadence/intel: simplify PDI/port mapping
soundwire: intel: remove playback/capture stream_name
soundwire: remove DAI_ID_RANGE definitions
soundwire: intel: remove X86 dependency
soundwire: intel: add missing headers for cross-compilation
|
|
There is no good reason why the unique_id needs to be stored as 4
bits. The code will work without changes with a u8 since all values
are already filtered while parsing the ACPI tables and Slave devID
registers.
Use u8 representation. This will allow us to encode a
"IGNORE_UNIQUE_ID" value to account for firmware/BIOS creativity.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20191022234808.17432-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
|
|
The EDAC_DIMM_OFF() macro takes 5 arguments to get the DIMM's index.
Simplify this by storing the index in struct dimm_info to avoid its
calculation and remove the EDAC_DIMM_OFF() macro. The index can be
directly used then.
Another advantage is that edac_mc_alloc() could be used even if the
exact size of the layers is unknown. Only the number of DIMMs would be
needed.
Rename iterator variable to idx, while at it. The name is more handy,
esp. when searching for it in the code.
Signed-off-by: Robert Richter <rrichter@marvell.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20191106093239.25517-3-rrichter@marvell.com
|
|
The EDAC_DIMM_PTR() macro takes 3 arguments from struct mem_ctl_info.
Clean up this interface to only pass the mci struct and replace this
macro with a new function edac_get_dimm().
Also introduce an edac_get_dimm_by_index() function for later use.
This allows it to get a DIMM pointer only by a given index. This can
be useful if the DIMM's position within the layers of the memory
controller or the exact size of the layers are unknown.
Small style changes made for some hunks after applying the semantic
patch.
Semantic patch used:
@@ expression mci, a, b,c; @@
-EDAC_DIMM_PTR(mci->layers, mci->dimms, mci->n_layers, a, b, c)
+edac_get_dimm(mci, a, b, c)
[ bp: Touchups. ]
Signed-off-by: Robert Richter <rrichter@marvell.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Jason Baron <jbaron@akamai.com>
Cc: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: Tony Luck <tony.luck@intel.com>
Link: https://lkml.kernel.org/r/20191106093239.25517-2-rrichter@marvell.com
|
|
Beelink GS1 Andoid TV Box ships with a simple NEC remote.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
|
|
struct scsi_cmnd cmd->req.resid_len which is returned and set respectively
by the helper functions scsi_get_resid() and scsi_set_resid() is an
unsigned int. Reflect this fact in the interface of these helper functions.
Also fix compilation errors due to min() and max() type mismatch introduced
by this change in scsi debug code, usb transport code and in the USB ENE
card reader driver.
Link: https://lore.kernel.org/r/20191030090847.25650-1-damien.lemoal@wdc.com
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
Pull networking fixes from David Miller:
1) BPF sample build fixes from Björn Töpel
2) Fix powerpc bpf tail call implementation, from Eric Dumazet.
3) DCCP leaks jiffies on the wire, fix also from Eric Dumazet.
4) Fix crash in ebtables when using dnat target, from Florian Westphal.
5) Fix port disable handling whne removing bcm_sf2 driver, from Florian
Fainelli.
6) Fix kTLS sk_msg trim on fallback to copy mode, from Jakub Kicinski.
7) Various KCSAN fixes all over the networking, from Eric Dumazet.
8) Memory leaks in mlx5 driver, from Alex Vesker.
9) SMC interface refcounting fix, from Ursula Braun.
10) TSO descriptor handling fixes in stmmac driver, from Jose Abreu.
11) Add a TX lock to synchonize the kTLS TX path properly with crypto
operations. From Jakub Kicinski.
12) Sock refcount during shutdown fix in vsock/virtio code, from Stefano
Garzarella.
13) Infinite loop in Intel ice driver, from Colin Ian King.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (108 commits)
ixgbe: need_wakeup flag might not be set for Tx
i40e: need_wakeup flag might not be set for Tx
igb/igc: use ktime accessors for skb->tstamp
i40e: Fix for ethtool -m issue on X722 NIC
iavf: initialize ITRN registers with correct values
ice: fix potential infinite loop because loop counter being too small
qede: fix NULL pointer deref in __qede_remove()
net: fix data-race in neigh_event_send()
vsock/virtio: fix sock refcnt holding during the shutdown
net: ethernet: octeon_mgmt: Account for second possible VLAN header
mac80211: fix station inactive_time shortly after boot
net/fq_impl: Switch to kvmalloc() for memory allocation
mac80211: fix ieee80211_txq_setup_flows() failure path
ipv4: Fix table id reference in fib_sync_down_addr
ipv6: fixes rt6_probe() and fib6_nh->last_probe init
net: hns: Fix the stray netpoll locks causing deadlock in NAPI path
net: usb: qmi_wwan: add support for DW5821e with eSIM support
CDC-NCM: handle incomplete transfer of MTU
nfc: netlink: fix double device reference drop
NFC: st21nfca: fix double free
...
|
|
Pull block fixes from Jens Axboe:
- Two NVMe device removal crash fixes, and a compat fixup for for an
ioctl that was introduced in this release (Anton, Charles, Max - via
Keith)
- Missing error path mutex unlock for drbd (Dan)
- cgroup writeback fixup on dead memcg (Tejun)
- blkcg online stats print fix (Tejun)
* tag 'for-linus-2019-11-08' of git://git.kernel.dk/linux-block:
cgroup,writeback: don't switch wbs immediately on dead wbs if the memcg is dead
block: drbd: remove a stray unlock in __drbd_send_protocol()
blkcg: make blkcg_print_stat() print stats only for online blkgs
nvme: change nvme_passthru_cmd64 to explicitly mark rsvd
nvme-multipath: fix crash in nvme_mpath_clear_ctrl_paths
nvme-rdma: fix a segmentation fault during module unload
|
