summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2024-02-01Merge tag 'nf-24-01-31' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net 1) TCP conntrack now only evaluates window negotiation for packets in the REPLY direction, from Ryan Schaefer. Otherwise SYN retransmissions trigger incorrect window scale negotiation. From Ryan Schaefer. 2) Restrict tunnel objects to NFPROTO_NETDEV which is where it makes sense to use this object type. 3) Fix conntrack pick up from the middle of SCTP_CID_SHUTDOWN_ACK packets. From Xin Long. 4) Another attempt from Jozsef Kadlecsik to address the slow down of the swap command in ipset. 5) Replace a BUG_ON by WARN_ON_ONCE in nf_log, and consolidate check for the case that the logger is NULL from the read side lock section. 6) Address lack of sanitization for custom expectations. Restrict layer 3 and 4 families to what it is supported by userspace. * tag 'nf-24-01-31' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nft_ct: sanitize layer 3 and 4 protocol number in custom expectations netfilter: nf_log: replace BUG_ON by WARN_ON_ONCE when putting logger netfilter: ipset: fix performance regression in swap operation netfilter: conntrack: check SCTP_CID_SHUTDOWN_ACK for vtag setting in sctp_new netfilter: nf_tables: restrict tunnel object to NFPROTO_NETDEV netfilter: conntrack: correct window scaling with retransmitted SYN ==================== Link: https://lore.kernel.org/r/20240131225943.7536-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-01ASoC: cs35l56: Allow more time for firmware to bootRichard Fitzgerald
The original 50ms timeout for firmware boot is not long enough for worst-case time to reboot after a firmware download. Increase the timeout to 250ms. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: e49611252900 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56") Link: https://msgid.link/r/20240129162737.497-15-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-01ASoC: cs35l56: Load tunings for the correct speaker modelsRichard Fitzgerald
If the "spk-id-gpios" property is present it points to GPIOs whose value must be used to select the correct bin file to match the speakers. Some manufacturers use multiple sources of speakers, which need different tunings for best performance. On these models the type of speaker fitted is indicated by the values of one or more GPIOs. The number formed by the GPIOs identifies the tuning required. The speaker ID must be used in combination with the subsystem ID (either from PCI SSID or cirrus,firmware-uid property), because the GPIOs can only indicate variants of a specific model. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: 1a1c3d794ef6 ("ASoC: cs35l56: Use PCI SSID as the firmware UID") Link: https://msgid.link/r/20240129162737.497-14-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-01ASoC: cs35l56: Firmware file must match the version of preloaded firmwareRichard Fitzgerald
Check during initialization whether the firmware is already patched. If so, include the firmware version in the wm_adsp fwf_name string. If the firmware has already been patched by the BIOS the driver can only replace it if it has control of hard RESET. If the driver cannot replace the firmware, it can still load a wmfw (for ALSA control definitions) and/or a bin (for additional tunings). But these must match the version of firmware that is running on the CS35L56. The firmware is pre-patched if FIRMWARE_MISSING == 0. Including the firmware version in the fwf_name string will qualify the firmware file name: Normal (unpatched or replaceable firmware): cs35l56-rev-dsp1-misc[-system_name].[wmfw|bin] Preloaded firmware: cs35l56-rev[-s]-VVVVVV-dsp1-misc[-system_name].[wmfw|bin] Where: [-s] is an optional -s added into the name for a secured CS35L56 VVVVVV is the 24-bit firmware version in hexadecimal. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: 608f1b0dbdde ("ASoC: cs35l56: Move DSP part string generation so that it is done only once") Link: https://msgid.link/r/20240129162737.497-13-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-01ASoC: cs35l56: Fix to ensure ASP1 registers match cacheRichard Fitzgerald
Add a dummy SUPPLY widget connected to the ASP that forces the chip registers to match the regmap cache when the ASP is powered-up. On a SoundWire system the ASP is free for use as a chip-to-chip interconnect. This can be either for the firmware on multiple CS35L56 to share reference audio; or as a bridge to another device. If it is a firmware interconnect it is owned by the firmware and the Linux driver should avoid writing the registers. However. If it is a bridge then Linux may take over and handle it as a normal codec-to-codec link. CS35L56 is designed for SDCA and a generic SDCA driver would know nothing about these chip-specific registers. So if the ASP is being used on a SoundWire system the firmware sets up the ASP registers. This means that we can't assume the default state of the ASP registers. But we don't know the initial state that the firmware set them to until after the firmware has been downloaded and booted, which can take several seconds when downloading multiple amps. To avoid blocking probe() for several seconds waiting for the firmware, the silicon defaults are assumed. This allows the machine driver to setup the ASP configuration during probe() without being blocked. If the ASP is hooked up and used, the SUPPLY widget ensures that the chip registers match what was configured in the regmap cache. If the machine driver does not hook up the ASP, it is assumed that it won't call any functions to configure the ASP DAI. Therefore the regmap cache will be clean for these registers so a regcache_sync() will not overwrite the chip registers. If the DAI is not hooked up, the dummy SUPPLY widget will not be invoked so it will never force-overwrite the chip registers. Backport note: This won't apply cleanly to kernels older than v6.6. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: e49611252900 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56") Link: https://msgid.link/r/20240129162737.497-8-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-01-31af_unix: fix lockdep positive in sk_diag_dump_icons()Eric Dumazet
syzbot reported a lockdep splat [1]. Blamed commit hinted about the possible lockdep violation, and code used unix_state_lock_nested() in an attempt to silence lockdep. It is not sufficient, because unix_state_lock_nested() is already used from unix_state_double_lock(). We need to use a separate subclass. This patch adds a distinct enumeration to make things more explicit. Also use swap() in unix_state_double_lock() as a clean up. v2: add a missing inline keyword to unix_state_lock_nested() [1] WARNING: possible circular locking dependency detected 6.8.0-rc1-syzkaller-00356-g8a696a29c690 #0 Not tainted syz-executor.1/2542 is trying to acquire lock: ffff88808b5df9e8 (rlock-AF_UNIX){+.+.}-{2:2}, at: skb_queue_tail+0x36/0x120 net/core/skbuff.c:3863 but task is already holding lock: ffff88808b5dfe70 (&u->lock/1){+.+.}-{2:2}, at: unix_dgram_sendmsg+0xfc7/0x2200 net/unix/af_unix.c:2089 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&u->lock/1){+.+.}-{2:2}: lock_acquire+0x1e3/0x530 kernel/locking/lockdep.c:5754 _raw_spin_lock_nested+0x31/0x40 kernel/locking/spinlock.c:378 sk_diag_dump_icons net/unix/diag.c:87 [inline] sk_diag_fill+0x6ea/0xfe0 net/unix/diag.c:157 sk_diag_dump net/unix/diag.c:196 [inline] unix_diag_dump+0x3e9/0x630 net/unix/diag.c:220 netlink_dump+0x5c1/0xcd0 net/netlink/af_netlink.c:2264 __netlink_dump_start+0x5d7/0x780 net/netlink/af_netlink.c:2370 netlink_dump_start include/linux/netlink.h:338 [inline] unix_diag_handler_dump+0x1c3/0x8f0 net/unix/diag.c:319 sock_diag_rcv_msg+0xe3/0x400 netlink_rcv_skb+0x1df/0x430 net/netlink/af_netlink.c:2543 sock_diag_rcv+0x2a/0x40 net/core/sock_diag.c:280 netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline] netlink_unicast+0x7e6/0x980 net/netlink/af_netlink.c:1367 netlink_sendmsg+0xa37/0xd70 net/netlink/af_netlink.c:1908 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] sock_write_iter+0x39a/0x520 net/socket.c:1160 call_write_iter include/linux/fs.h:2085 [inline] new_sync_write fs/read_write.c:497 [inline] vfs_write+0xa74/0xca0 fs/read_write.c:590 ksys_write+0x1a0/0x2c0 fs/read_write.c:643 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b -> #0 (rlock-AF_UNIX){+.+.}-{2:2}: check_prev_add kernel/locking/lockdep.c:3134 [inline] check_prevs_add kernel/locking/lockdep.c:3253 [inline] validate_chain+0x1909/0x5ab0 kernel/locking/lockdep.c:3869 __lock_acquire+0x1345/0x1fd0 kernel/locking/lockdep.c:5137 lock_acquire+0x1e3/0x530 kernel/locking/lockdep.c:5754 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0xd5/0x120 kernel/locking/spinlock.c:162 skb_queue_tail+0x36/0x120 net/core/skbuff.c:3863 unix_dgram_sendmsg+0x15d9/0x2200 net/unix/af_unix.c:2112 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] ____sys_sendmsg+0x592/0x890 net/socket.c:2584 ___sys_sendmsg net/socket.c:2638 [inline] __sys_sendmmsg+0x3b2/0x730 net/socket.c:2724 __do_sys_sendmmsg net/socket.c:2753 [inline] __se_sys_sendmmsg net/socket.c:2750 [inline] __x64_sys_sendmmsg+0xa0/0xb0 net/socket.c:2750 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&u->lock/1); lock(rlock-AF_UNIX); lock(&u->lock/1); lock(rlock-AF_UNIX); *** DEADLOCK *** 1 lock held by syz-executor.1/2542: #0: ffff88808b5dfe70 (&u->lock/1){+.+.}-{2:2}, at: unix_dgram_sendmsg+0xfc7/0x2200 net/unix/af_unix.c:2089 stack backtrace: CPU: 1 PID: 2542 Comm: syz-executor.1 Not tainted 6.8.0-rc1-syzkaller-00356-g8a696a29c690 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1e7/0x2d0 lib/dump_stack.c:106 check_noncircular+0x366/0x490 kernel/locking/lockdep.c:2187 check_prev_add kernel/locking/lockdep.c:3134 [inline] check_prevs_add kernel/locking/lockdep.c:3253 [inline] validate_chain+0x1909/0x5ab0 kernel/locking/lockdep.c:3869 __lock_acquire+0x1345/0x1fd0 kernel/locking/lockdep.c:5137 lock_acquire+0x1e3/0x530 kernel/locking/lockdep.c:5754 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0xd5/0x120 kernel/locking/spinlock.c:162 skb_queue_tail+0x36/0x120 net/core/skbuff.c:3863 unix_dgram_sendmsg+0x15d9/0x2200 net/unix/af_unix.c:2112 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] ____sys_sendmsg+0x592/0x890 net/socket.c:2584 ___sys_sendmsg net/socket.c:2638 [inline] __sys_sendmmsg+0x3b2/0x730 net/socket.c:2724 __do_sys_sendmmsg net/socket.c:2753 [inline] __se_sys_sendmmsg net/socket.c:2750 [inline] __x64_sys_sendmmsg+0xa0/0xb0 net/socket.c:2750 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b RIP: 0033:0x7f26d887cda9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 e1 20 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f26d95a60c8 EFLAGS: 00000246 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 00007f26d89abf80 RCX: 00007f26d887cda9 RDX: 000000000000003e RSI: 00000000200bd000 RDI: 0000000000000004 RBP: 00007f26d88c947a R08: 0000000000000000 R09: 0000000000000000 R10: 00000000000008c0 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000000b R14: 00007f26d89abf80 R15: 00007ffcfe081a68 Fixes: 2aac7a2cb0d9 ("unix_diag: Pending connections IDs NLA") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20240130184235.1620738-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-31nvme: take const cmd pointer in read-only helpersCaleb Sander
nvme_is_fabrics() and nvme_is_write() only read struct nvme_command, so take it by const pointer. This allows callers to pass a const pointer and communicates that these functions don't modify the command. Signed-off-by: Caleb Sander <csander@purestorage.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org>
2024-01-31netfilter: ipset: fix performance regression in swap operationJozsef Kadlecsik
The patch "netfilter: ipset: fix race condition between swap/destroy and kernel side add/del/test", commit 28628fa9 fixes a race condition. But the synchronize_rcu() added to the swap function unnecessarily slows it down: it can safely be moved to destroy and use call_rcu() instead. Eric Dumazet pointed out that simply calling the destroy functions as rcu callback does not work: sets with timeout use garbage collectors which need cancelling at destroy which can wait. Therefore the destroy functions are split into two: cancelling garbage collectors safely at executing the command received by netlink and moving the remaining part only into the rcu callback. Link: https://lore.kernel.org/lkml/C0829B10-EAA6-4809-874E-E1E9C05A8D84@automattic.com/ Fixes: 28628fa952fe ("netfilter: ipset: fix race condition between swap/destroy and kernel side add/del/test") Reported-by: Ale Crismani <ale.crismani@automattic.com> Reported-by: David Wang <00107082@163.com> Tested-by: David Wang <00107082@163.com> Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-01-31netfilter: nf_tables: restrict tunnel object to NFPROTO_NETDEVPablo Neira Ayuso
Bail out on using the tunnel dst template from other than netdev family. Add the infrastructure to check for the family in objects. Fixes: af308b94a2a4 ("netfilter: nf_tables: add tunnel support") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-01-31PCI/ASPM: Fix deadlock when enabling ASPMJohan Hovold
A last minute revert in 6.7-final introduced a potential deadlock when enabling ASPM during probe of Qualcomm PCIe controllers as reported by lockdep: ============================================ WARNING: possible recursive locking detected 6.7.0 #40 Not tainted -------------------------------------------- kworker/u16:5/90 is trying to acquire lock: ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pcie_aspm_pm_state_change+0x58/0xdc but task is already holding lock: ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pci_walk_bus+0x34/0xbc other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(pci_bus_sem); lock(pci_bus_sem); *** DEADLOCK *** Call trace: print_deadlock_bug+0x25c/0x348 __lock_acquire+0x10a4/0x2064 lock_acquire+0x1e8/0x318 down_read+0x60/0x184 pcie_aspm_pm_state_change+0x58/0xdc pci_set_full_power_state+0xa8/0x114 pci_set_power_state+0xc4/0x120 qcom_pcie_enable_aspm+0x1c/0x3c [pcie_qcom] pci_walk_bus+0x64/0xbc qcom_pcie_host_post_init_2_7_0+0x28/0x34 [pcie_qcom] The deadlock can easily be reproduced on machines like the Lenovo ThinkPad X13s by adding a delay to increase the race window during asynchronous probe where another thread can take a write lock. Add a new pci_set_power_state_locked() and associated helper functions that can be called with the PCI bus semaphore held to avoid taking the read lock twice. Link: https://lore.kernel.org/r/ZZu0qx2cmn7IwTyQ@hovoldconsulting.com Link: https://lore.kernel.org/r/20240130100243.11011-1-johan+linaro@kernel.org Fixes: f93e71aea6c6 ("Revert "PCI/ASPM: Remove pcie_aspm_pm_state_change()"") Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: <stable@vger.kernel.org> # 6.7
2024-01-31HID: bpf: use __bpf_kfunc instead of noinlineBenjamin Tissoires
Follow the docs at Documentation/bpf/kfuncs.rst: - declare the function with `__bpf_kfunc` - disables missing prototype warnings, which allows to remove them from include/linux/hid-bpf.h Removing the prototypes is not an issue because we currently have to redeclare them when writing the BPF program. They will eventually be generated by bpftool directly AFAIU. Link: https://lore.kernel.org/r/20240124-b4-hid-bpf-fixes-v2-3-052520b1e5e6@kernel.org Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
2024-01-31IB/mlx5: Don't expose debugfs entries for RRoCE general parameters if not ↵Mark Zhang
supported debugfs entries for RRoCE general CC parameters must be exposed only when they are supported, otherwise when accessing them there may be a syndrome error in kernel log, for example: $ cat /sys/kernel/debug/mlx5/0000:08:00.1/cc_params/rtt_resp_dscp cat: '/sys/kernel/debug/mlx5/0000:08:00.1/cc_params/rtt_resp_dscp': Invalid argument $ dmesg mlx5_core 0000:08:00.1: mlx5_cmd_out_err:805:(pid 1253): QUERY_CONG_PARAMS(0x824) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x325a82), err(-22) Fixes: 66fb1d5df6ac ("IB/mlx5: Extend debug control for CC parameters") Reviewed-by: Edward Srouji <edwards@nvidia.com> Signed-off-by: Mark Zhang <markzhang@nvidia.com> Link: https://lore.kernel.org/r/e7ade70bad52b7468bdb1de4d41d5fad70c8b71c.1706433934.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leon@kernel.org>
2024-01-31RDMA/mlx5: Fix fortify source warning while accessing Eth segmentLeon Romanovsky
------------[ cut here ]------------ memcpy: detected field-spanning write (size 56) of single field "eseg->inline_hdr.start" at /var/lib/dkms/mlnx-ofed-kernel/5.8/build/drivers/infiniband/hw/mlx5/wr.c:131 (size 2) WARNING: CPU: 0 PID: 293779 at /var/lib/dkms/mlnx-ofed-kernel/5.8/build/drivers/infiniband/hw/mlx5/wr.c:131 mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] Modules linked in: 8021q garp mrp stp llc rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) mlx5_ib(OE) ib_uverbs(OE) ib_core(OE) mlx5_core(OE) pci_hyperv_intf mlxdevm(OE) mlx_compat(OE) tls mlxfw(OE) psample nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ip_set nf_tables libcrc32c nfnetlink mst_pciconf(OE) knem(OE) vfio_pci vfio_pci_core vfio_iommu_type1 vfio iommufd irqbypass cuse nfsv3 nfs fscache netfs xfrm_user xfrm_algo ipmi_devintf ipmi_msghandler binfmt_misc crct10dif_pclmul crc32_pclmul polyval_clmulni polyval_generic ghash_clmulni_intel sha512_ssse3 snd_pcsp aesni_intel crypto_simd cryptd snd_pcm snd_timer joydev snd soundcore input_leds serio_raw evbug nfsd auth_rpcgss nfs_acl lockd grace sch_fq_codel sunrpc drm efi_pstore ip_tables x_tables autofs4 psmouse virtio_net net_failover failover floppy [last unloaded: mlx_compat(OE)] CPU: 0 PID: 293779 Comm: ssh Tainted: G OE 6.2.0-32-generic #32~22.04.1-Ubuntu Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] Code: 0c 01 00 a8 01 75 25 48 8b 75 a0 b9 02 00 00 00 48 c7 c2 10 5b fd c0 48 c7 c7 80 5b fd c0 c6 05 57 0c 03 00 01 e8 95 4d 93 da <0f> 0b 44 8b 4d b0 4c 8b 45 c8 48 8b 4d c0 e9 49 fb ff ff 41 0f b7 RSP: 0018:ffffb5b48478b570 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffffb5b48478b628 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffb5b48478b5e8 R13: ffff963a3c609b5e R14: ffff9639c3fbd800 R15: ffffb5b480475a80 FS: 00007fc03b444c80(0000) GS:ffff963a3dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000556f46bdf000 CR3: 0000000006ac6003 CR4: 00000000003706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ? show_regs+0x72/0x90 ? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] ? __warn+0x8d/0x160 ? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] ? report_bug+0x1bb/0x1d0 ? handle_bug+0x46/0x90 ? exc_invalid_op+0x19/0x80 ? asm_exc_invalid_op+0x1b/0x20 ? mlx5_ib_post_send+0x191b/0x1a60 [mlx5_ib] mlx5_ib_post_send_nodrain+0xb/0x20 [mlx5_ib] ipoib_send+0x2ec/0x770 [ib_ipoib] ipoib_start_xmit+0x5a0/0x770 [ib_ipoib] dev_hard_start_xmit+0x8e/0x1e0 ? validate_xmit_skb_list+0x4d/0x80 sch_direct_xmit+0x116/0x3a0 __dev_xmit_skb+0x1fd/0x580 __dev_queue_xmit+0x284/0x6b0 ? _raw_spin_unlock_irq+0xe/0x50 ? __flush_work.isra.0+0x20d/0x370 ? push_pseudo_header+0x17/0x40 [ib_ipoib] neigh_connected_output+0xcd/0x110 ip_finish_output2+0x179/0x480 ? __smp_call_single_queue+0x61/0xa0 __ip_finish_output+0xc3/0x190 ip_finish_output+0x2e/0xf0 ip_output+0x78/0x110 ? __pfx_ip_finish_output+0x10/0x10 ip_local_out+0x64/0x70 __ip_queue_xmit+0x18a/0x460 ip_queue_xmit+0x15/0x30 __tcp_transmit_skb+0x914/0x9c0 tcp_write_xmit+0x334/0x8d0 tcp_push_one+0x3c/0x60 tcp_sendmsg_locked+0x2e1/0xac0 tcp_sendmsg+0x2d/0x50 inet_sendmsg+0x43/0x90 sock_sendmsg+0x68/0x80 sock_write_iter+0x93/0x100 vfs_write+0x326/0x3c0 ksys_write+0xbd/0xf0 ? do_syscall_64+0x69/0x90 __x64_sys_write+0x19/0x30 do_syscall_64+0x59/0x90 ? do_user_addr_fault+0x1d0/0x640 ? exit_to_user_mode_prepare+0x3b/0xd0 ? irqentry_exit_to_user_mode+0x9/0x20 ? irqentry_exit+0x43/0x50 ? exc_page_fault+0x92/0x1b0 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7fc03ad14a37 Code: 10 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 RSP: 002b:00007ffdf8697fe8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000008024 RCX: 00007fc03ad14a37 RDX: 0000000000008024 RSI: 0000556f46bd8270 RDI: 0000000000000003 RBP: 0000556f46bb1800 R08: 0000000000007fe3 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000002 R13: 0000556f46bc66b0 R14: 000000000000000a R15: 0000556f46bb2f50 </TASK> ---[ end trace 0000000000000000 ]--- Link: https://lore.kernel.org/r/8228ad34bd1a25047586270f7b1fb4ddcd046282.1706433934.git.leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
2024-01-30lsm: fix default return value of the socket_getpeersec_*() hooksOndrej Mosnacek
For these hooks the true "neutral" value is -EOPNOTSUPP, which is currently what is returned when no LSM provides this hook and what LSMs return when there is no security context set on the socket. Correct the value in <linux/lsm_hooks.h> and adjust the dispatch functions in security/security.c to avoid issues when the BPF LSM is enabled. Cc: stable@vger.kernel.org Fixes: 98e828a0650f ("security: Refactor declaration of LSM hooks") Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> [PM: subject line tweak] Signed-off-by: Paul Moore <paul@paul-moore.com>
2024-01-30dmaengine: fix is_slave_direction() return false when DMA_DEV_TO_DEVFrank Li
is_slave_direction() should return true when direction is DMA_DEV_TO_DEV. Fixes: 49920bc66984 ("dmaengine: add new enum dma_transfer_direction") Signed-off-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20240123172842.3764529-1-Frank.Li@nxp.com Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-01-29Merge tag 'mm-hotfixes-stable-2024-01-28-23-21' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull misc fixes from Andrew Morton: "22 hotfixes. 11 are cc:stable and the remainder address post-6.7 issues or aren't considered appropriate for backporting" * tag 'mm-hotfixes-stable-2024-01-28-23-21' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (22 commits) mm: thp_get_unmapped_area must honour topdown preference mm: huge_memory: don't force huge page alignment on 32 bit userfaultfd: fix mmap_changing checking in mfill_atomic_hugetlb selftests/mm: ksm_tests should only MADV_HUGEPAGE valid memory scs: add CONFIG_MMU dependency for vfree_atomic() mm/memory: fix folio_set_dirty() vs. folio_mark_dirty() in zap_pte_range() mm/huge_memory: fix folio_set_dirty() vs. folio_mark_dirty() selftests/mm: Update va_high_addr_switch.sh to check CPU for la57 flag selftests: mm: fix map_hugetlb failure on 64K page size systems MAINTAINERS: supplement of zswap maintainers update stackdepot: make fast paths lock-less again stackdepot: add stats counters exported via debugfs mm, kmsan: fix infinite recursion due to RCU critical section mm/writeback: fix possible divide-by-zero in wb_dirty_limits(), again selftests/mm: switch to bash from sh MAINTAINERS: add man-pages git trees mm: memcontrol: don't throttle dying tasks on memory.high mm: mmap: map MAP_STACK to VM_NOHUGEPAGE uprobes: use pagesize-aligned virtual address when replacing pages selftests/mm: mremap_test: fix build warning ...
2024-01-28Merge tag 'x86_urgent_for_v6.8_rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - Make sure 32-bit syscall registers are properly sign-extended - Add detection for AMD's Zen5 generation CPUs and Intel's Clearwater Forest CPU model number - Make a stub function export non-GPL because it is part of the paravirt alternatives and that can be used by non-GPL code * tag 'x86_urgent_for_v6.8_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/CPU/AMD: Add more models to X86_FEATURE_ZEN5 x86/entry/ia32: Ensure s32 is sign extended to s64 x86/cpu: Add model number for Intel Clearwater Forest processor x86/CPU/AMD: Add X86_FEATURE_ZEN5 x86/paravirt: Make BUG_func() usable by non-GPL modules
2024-01-28iio: move LIGHT_UVA and LIGHT_UVB to the end of iio_modifierJavier Carrasco
The new modifiers should have added to the end of the enum, so they do not affect the existing entries. No modifiers were added since then, so they can be moved safely to the end of the list. Move IIO_MOD_LIGHT_UVA and IIO_MOD_LIGHT_UVB to the end of iio_modifier. Fixes: b89710bd215e ("iio: add modifiers for A and B ultraviolet light") Suggested-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com> Link: https://lore.kernel.org/r/20240127200208.185815-1-javier.carrasco.cruz@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-01-27tty: serial: Fix bit order in RS485 flag definitionsChristoph Niedermaier
Since the commit 93f3350c46fa ("RS485: fix inconsistencies in the meaning of some variables"), the definition for bit 3 has been removed. But with the switch to bit shift macros in commit 76ac8e29855b ("tty: serial: Cleanup the bit shift with macro"), this gap wasn't preserved. To avoid a break in user/kernel api of the system skip bit 3 again and add a placeholder comment. Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com> Fixes: 76ac8e29855b ("tty: serial: Cleanup the bit shift with macro") Fixes: 6056f20f27e9 ("tty: serial: Add RS422 flag to struct serial_rs485") Reviewed-by: Jiri Slaby <jirislaby@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Crescent CY Hsieh <crescentcy.hsieh@moxa.com> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Lukas Wunner <lukas@wunner.de> Cc: Lino Sanfilippo <l.sanfilippo@kunbus.com> Cc: Hugo Villeneuve <hugo@hugovil.com> Link: https://lore.kernel.org/r/20240119113516.2944-1-cniedermaier@dh-electronics.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-01-26ipmr: fix kernel panic when forwarding mcast packetsNicolas Dichtel
The stacktrace was: [ 86.305548] BUG: kernel NULL pointer dereference, address: 0000000000000092 [ 86.306815] #PF: supervisor read access in kernel mode [ 86.307717] #PF: error_code(0x0000) - not-present page [ 86.308624] PGD 0 P4D 0 [ 86.309091] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 86.309883] CPU: 2 PID: 3139 Comm: pimd Tainted: G U 6.8.0-6wind-knet #1 [ 86.311027] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.1-0-g0551a4be2c-prebuilt.qemu-project.org 04/01/2014 [ 86.312728] RIP: 0010:ip_mr_forward (/build/work/knet/net/ipv4/ipmr.c:1985) [ 86.313399] Code: f9 1f 0f 87 85 03 00 00 48 8d 04 5b 48 8d 04 83 49 8d 44 c5 00 48 8b 40 70 48 39 c2 0f 84 d9 00 00 00 49 8b 46 58 48 83 e0 fe <80> b8 92 00 00 00 00 0f 84 55 ff ff ff 49 83 47 38 01 45 85 e4 0f [ 86.316565] RSP: 0018:ffffad21c0583ae0 EFLAGS: 00010246 [ 86.317497] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 86.318596] RDX: ffff9559cb46c000 RSI: 0000000000000000 RDI: 0000000000000000 [ 86.319627] RBP: ffffad21c0583b30 R08: 0000000000000000 R09: 0000000000000000 [ 86.320650] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001 [ 86.321672] R13: ffff9559c093a000 R14: ffff9559cc00b800 R15: ffff9559c09c1d80 [ 86.322873] FS: 00007f85db661980(0000) GS:ffff955a79d00000(0000) knlGS:0000000000000000 [ 86.324291] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 86.325314] CR2: 0000000000000092 CR3: 000000002f13a000 CR4: 0000000000350ef0 [ 86.326589] Call Trace: [ 86.327036] <TASK> [ 86.327434] ? show_regs (/build/work/knet/arch/x86/kernel/dumpstack.c:479) [ 86.328049] ? __die (/build/work/knet/arch/x86/kernel/dumpstack.c:421 /build/work/knet/arch/x86/kernel/dumpstack.c:434) [ 86.328508] ? page_fault_oops (/build/work/knet/arch/x86/mm/fault.c:707) [ 86.329107] ? do_user_addr_fault (/build/work/knet/arch/x86/mm/fault.c:1264) [ 86.329756] ? srso_return_thunk (/build/work/knet/arch/x86/lib/retpoline.S:223) [ 86.330350] ? __irq_work_queue_local (/build/work/knet/kernel/irq_work.c:111 (discriminator 1)) [ 86.331013] ? exc_page_fault (/build/work/knet/./arch/x86/include/asm/paravirt.h:693 /build/work/knet/arch/x86/mm/fault.c:1515 /build/work/knet/arch/x86/mm/fault.c:1563) [ 86.331702] ? asm_exc_page_fault (/build/work/knet/./arch/x86/include/asm/idtentry.h:570) [ 86.332468] ? ip_mr_forward (/build/work/knet/net/ipv4/ipmr.c:1985) [ 86.333183] ? srso_return_thunk (/build/work/knet/arch/x86/lib/retpoline.S:223) [ 86.333920] ipmr_mfc_add (/build/work/knet/./include/linux/rcupdate.h:782 /build/work/knet/net/ipv4/ipmr.c:1009 /build/work/knet/net/ipv4/ipmr.c:1273) [ 86.334583] ? __pfx_ipmr_hash_cmp (/build/work/knet/net/ipv4/ipmr.c:363) [ 86.335357] ip_mroute_setsockopt (/build/work/knet/net/ipv4/ipmr.c:1470) [ 86.336135] ? srso_return_thunk (/build/work/knet/arch/x86/lib/retpoline.S:223) [ 86.336854] ? ip_mroute_setsockopt (/build/work/knet/net/ipv4/ipmr.c:1470) [ 86.337679] do_ip_setsockopt (/build/work/knet/net/ipv4/ip_sockglue.c:944) [ 86.338408] ? __pfx_unix_stream_read_actor (/build/work/knet/net/unix/af_unix.c:2862) [ 86.339232] ? srso_return_thunk (/build/work/knet/arch/x86/lib/retpoline.S:223) [ 86.339809] ? aa_sk_perm (/build/work/knet/security/apparmor/include/cred.h:153 /build/work/knet/security/apparmor/net.c:181) [ 86.340342] ip_setsockopt (/build/work/knet/net/ipv4/ip_sockglue.c:1415) [ 86.340859] raw_setsockopt (/build/work/knet/net/ipv4/raw.c:836) [ 86.341408] ? security_socket_setsockopt (/build/work/knet/security/security.c:4561 (discriminator 13)) [ 86.342116] sock_common_setsockopt (/build/work/knet/net/core/sock.c:3716) [ 86.342747] do_sock_setsockopt (/build/work/knet/net/socket.c:2313) [ 86.343363] __sys_setsockopt (/build/work/knet/./include/linux/file.h:32 /build/work/knet/net/socket.c:2336) [ 86.344020] __x64_sys_setsockopt (/build/work/knet/net/socket.c:2340) [ 86.344766] do_syscall_64 (/build/work/knet/arch/x86/entry/common.c:52 /build/work/knet/arch/x86/entry/common.c:83) [ 86.345433] ? srso_return_thunk (/build/work/knet/arch/x86/lib/retpoline.S:223) [ 86.346161] ? syscall_exit_work (/build/work/knet/./include/linux/audit.h:357 /build/work/knet/kernel/entry/common.c:160) [ 86.346938] ? srso_return_thunk (/build/work/knet/arch/x86/lib/retpoline.S:223) [ 86.347657] ? syscall_exit_to_user_mode (/build/work/knet/kernel/entry/common.c:215) [ 86.348538] ? srso_return_thunk (/build/work/knet/arch/x86/lib/retpoline.S:223) [ 86.349262] ? do_syscall_64 (/build/work/knet/./arch/x86/include/asm/cpufeature.h:171 /build/work/knet/arch/x86/entry/common.c:98) [ 86.349971] entry_SYSCALL_64_after_hwframe (/build/work/knet/arch/x86/entry/entry_64.S:129) The original packet in ipmr_cache_report() may be queued and then forwarded with ip_mr_forward(). This last function has the assumption that the skb dst is set. After the below commit, the skb dst is dropped by ipv4_pktinfo_prepare(), which causes the oops. Fixes: bb7403655b3c ("ipmr: support IP_PKTINFO on cache report IGMP msg") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20240125141847.1931933-1-nicolas.dichtel@6wind.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-26Merge tag 'ata-6.8-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux Pull ata updates from Niklas Cassel: - Fix an incorrect link_power_management_policy sysfs attribute value. We were previously using the same attribute value for two different LPM policies (me) - Add a ASMedia ASM1166 quirk. The SATA host controller always reports that it has 32 ports, even though it only has six ports. Add a quirk that overrides the value reported by the controller (Conrad) - Add a ASMedia ASM1061 quirk. The SATA host controller completely ignores the upper 21 bits of the DMA address. This causes IOMMU error events when a (valid) DMA address actually has any of the upper 21 bits set. Add a quirk that limits the dma_mask to 43-bits (Lennert) * tag 'ata-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux: ahci: add 43-bit DMA address quirk for ASMedia ASM1061 controllers ahci: asm1166: correct count of reported ports ata: libata-sata: improve sysfs description for ATA_LPM_UNKNOWN
2024-01-26Merge tag 'drm-fixes-2024-01-27' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm fixes from Dave Airlie: "Lots going on for rc2, ivpu has a bunch of stabilisation and debugging work, then amdgpu and xe are the main fixes. i915, exynos have a few, then some misc panel and bridge fixes. Worth mentioning are three regressions. One of the nouveau fixes in 6.7 for a serious deadlock had side effects, so I guess we will bring back the deadlock until I can figure out what should be done properly. There was a scheduler regression vs amdgpu which was reported in a few places and is now fixed. There was an i915 vs simpledrm problem resulting in black screens, that is reverted also. I'll be working on a proper nouveau fix, it kinda looks like one of those cases where someone tried to use an atomic where they should have probably used a lock, but I'll see. fb: - fix simpledrm/i915 regression by reverting change scheduler: - fix regression affecting amdgpu users due to sched draining nouveau: - revert 6.7 deadlock fix as it has side effects dp: - fix documentation warning ttm: - fix dummy page read on some platforms bridge: - anx7625 suspend fix - sii902x: fix probing and audio registration - parade-ps8640: fix suspend of bridge, aux fixes - samsung-dsim: avoid using FORCE_STOP_STATE panel: - simple add missing bus flags - fix samsung-s6d7aa0 flags amdgpu: - AC/DC power supply tracking fix - Don't show invalid vram vendor data - SMU 13.0.x fixes - GART fix for umr on systems without VRAM - GFX 10/11 UNORD_DISPATCH fixes - IPS display fixes (required for S0ix on some platforms) - Misc fixes i915: - DSI sequence revert to fix GitLab #10071 and DP test-pattern fix - Drop -Wstringop-overflow (broken on GCC11) ivpu: - fix recovery/reset support - improve submit ioctl stability - fix dev open/close races on unbind - PLL disable reset fix - deprecate context priority param - improve debug buffer logging - disable buffer sharing across VPU contexts - free buffer sgt on unbind - fix missing lock around shmem vmap - add better boot diagnostics - add more debug prints around mapping - dump MMU events in case of timeout v3d: - NULL ptr dereference fix exynos: - fix stack usage - fix incorrect type - fix dt typo - fix gsc runtime resume xe: - Make an ops struct static - Fix an implicit 0 to NULL conversion - A couple of 32-bit fixes - A migration coherency fix for Lunar Lake. - An error path vm id leak fix - Remove PVC references in kunit tests" * tag 'drm-fixes-2024-01-27' of git://anongit.freedesktop.org/drm/drm: (66 commits) Revert "nouveau: push event block/allowing out of the fence context" drm: bridge: samsung-dsim: Don't use FORCE_STOP_STATE drm/sched: Drain all entities in DRM sched run job worker drm/amd/display: "Enable IPS by default" drm/amd: Add a DC debug mask for IPS drm/amd/display: Disable ips before dc interrupt setting drm/amd/display: Replay + IPS + ABM in Full Screen VPB drm/amd/display: Add IPS checks before dcn register access drm/amd/display: Add Replay IPS register for DMUB command table drm/amd/display: Allow IPS2 during Replay drm/amdgpu/gfx11: set UNORD_DISPATCH in compute MQDs drm/amdgpu/gfx10: set UNORD_DISPATCH in compute MQDs drm/amd/amdgpu: Assign GART pages to AMD device mapping drm/amd/pm: Fetch current power limit from FW drm/amdgpu: Fix null pointer dereference drm/amdgpu: Show vram vendor only if available drm/amd/pm: update the power cap setting drm/amdgpu: Avoid fetching vram vendor information drm/amdgpu/pm: Fix the power source flag error drm/amd/display: Fix uninitialized variable usage in core_link_ 'read_dpcd() & write_dpcd()' functions ...
2024-01-26Merge tag 'spi-fix-v6.8-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "As well as a few device IDs and the usual scattering of driver specific fixes this contains a couple of core things. One is a missed case in error handling, the other patch is a change from me raising the number of chip selects allowed by the newly added multi chip select support patches to resolve problems seen on several systems that exceeded the limit. This is not a real solution to the issue but rather just a change to avoid disruption to users, one of the options I am considering is just sending a revert of those changes if we can't come up with something sensible" * tag 'spi-fix-v6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: fix finalize message on error return spi: cs42l43: Handle error from devm_pm_runtime_enable spi: Raise limit on number of chip selects spi: hisi-sfc-v3xx: Return IRQ_NONE if no interrupts were detected spi: spi-cadence: Reverse the order of interleaved write and read operations spi: spi-imx: Use dev_err_probe for failed DMA channel requests spi: bcm-qspi: fix SFDP BFPT read by usig mspi read spi: intel-pci: Add support for Arrow Lake SPI serial flash spi: intel-pci: Remove Meteor Lake-S SoC PCI ID from the list
2024-01-25mm, kmsan: fix infinite recursion due to RCU critical sectionMarco Elver
Alexander Potapenko writes in [1]: "For every memory access in the code instrumented by KMSAN we call kmsan_get_metadata() to obtain the metadata for the memory being accessed. For virtual memory the metadata pointers are stored in the corresponding `struct page`, therefore we need to call virt_to_page() to get them. According to the comment in arch/x86/include/asm/page.h, virt_to_page(kaddr) returns a valid pointer iff virt_addr_valid(kaddr) is true, so KMSAN needs to call virt_addr_valid() as well. To avoid recursion, kmsan_get_metadata() must not call instrumented code, therefore ./arch/x86/include/asm/kmsan.h forks parts of arch/x86/mm/physaddr.c to check whether a virtual address is valid or not. But the introduction of rcu_read_lock() to pfn_valid() added instrumented RCU API calls to virt_to_page_or_null(), which is called by kmsan_get_metadata(), so there is an infinite recursion now. I do not think it is correct to stop that recursion by doing kmsan_enter_runtime()/kmsan_exit_runtime() in kmsan_get_metadata(): that would prevent instrumented functions called from within the runtime from tracking the shadow values, which might introduce false positives." Fix the issue by switching pfn_valid() to the _sched() variant of rcu_read_lock/unlock(), which does not require calling into RCU. Given the critical section in pfn_valid() is very small, this is a reasonable trade-off (with preemptible RCU). KMSAN further needs to be careful to suppress calls into the scheduler, which would be another source of recursion. This can be done by wrapping the call to pfn_valid() into preempt_disable/enable_no_resched(). The downside is that this sacrifices breaking scheduling guarantees; however, a kernel compiled with KMSAN has already given up any performance guarantees due to being heavily instrumented. Note, KMSAN code already disables tracing via Makefile, and since mmzone.h is included, it is not necessary to use the notrace variant, which is generally preferred in all other cases. Link: https://lkml.kernel.org/r/20240115184430.2710652-1-glider@google.com [1] Link: https://lkml.kernel.org/r/20240118110022.2538350-1-elver@google.com Fixes: 5ec8e8ea8b77 ("mm/sparsemem: fix race in accessing memory_section->usage") Signed-off-by: Marco Elver <elver@google.com> Reported-by: Alexander Potapenko <glider@google.com> Reported-by: syzbot+93a9e8a3dea8d6085e12@syzkaller.appspotmail.com Reviewed-by: Alexander Potapenko <glider@google.com> Tested-by: Alexander Potapenko <glider@google.com> Cc: Charan Teja Kalla <quic_charante@quicinc.com> Cc: Borislav Petkov (AMD) <bp@alien8.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-01-25mm: mmap: map MAP_STACK to VM_NOHUGEPAGEYang Shi
commit efa7df3e3bb5 ("mm: align larger anonymous mappings on THP boundaries") incured regression for stress-ng pthread benchmark [1]. It is because THP get allocated to pthread's stack area much more possible than before. Pthread's stack area is allocated by mmap without VM_GROWSDOWN or VM_GROWSUP flag, so kernel can't tell whether it is a stack area or not. The MAP_STACK flag is used to mark the stack area, but it is a no-op on Linux. Mapping MAP_STACK to VM_NOHUGEPAGE to prevent from allocating THP for such stack area. With this change the stack area looks like: fffd18e10000-fffd19610000 rw-p 00000000 00:00 0 Size: 8192 kB KernelPageSize: 4 kB MMUPageSize: 4 kB Rss: 12 kB Pss: 12 kB Pss_Dirty: 12 kB Shared_Clean: 0 kB Shared_Dirty: 0 kB Private_Clean: 0 kB Private_Dirty: 12 kB Referenced: 12 kB Anonymous: 12 kB KSM: 0 kB LazyFree: 0 kB AnonHugePages: 0 kB ShmemPmdMapped: 0 kB FilePmdMapped: 0 kB Shared_Hugetlb: 0 kB Private_Hugetlb: 0 kB Swap: 0 kB SwapPss: 0 kB Locked: 0 kB THPeligible: 0 VmFlags: rd wr mr mw me ac nh The "nh" flag is set. [1] https://lore.kernel.org/linux-mm/202312192310.56367035-oliver.sang@intel.com/ Link: https://lkml.kernel.org/r/20231221065943.2803551-2-shy828301@gmail.com Fixes: efa7df3e3bb5 ("mm: align larger anonymous mappings on THP boundaries") Signed-off-by: Yang Shi <yang@os.amperecomputing.com> Reported-by: kernel test robot <oliver.sang@intel.com> Tested-by: Oliver Sang <oliver.sang@intel.com> Reviewed-by: Yin Fengwei <fengwei.yin@intel.com> Cc: Rik van Riel <riel@surriel.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Christopher Lameter <cl@linux.com> Cc: Huang, Ying <ying.huang@intel.com> Cc: <stable@vger.kerenl.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2024-01-25Merge tag 'net-6.8-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from bpf, netfilter and WiFi. Jakub is doing a lot of work to include the self-tests in our CI, as a result a significant amount of self-tests related fixes is flowing in (and will likely continue in the next few weeks). Current release - regressions: - bpf: fix a kernel crash for the riscv 64 JIT - bnxt_en: fix memory leak in bnxt_hwrm_get_rings() - revert "net: macsec: use skb_ensure_writable_head_tail to expand the skb" Previous releases - regressions: - core: fix removing a namespace with conflicting altnames - tc/flower: fix chain template offload memory leak - tcp: - make sure init the accept_queue's spinlocks once - fix autocork on CPUs with weak memory model - udp: fix busy polling - mlx5e: - fix out-of-bound read in port timestamping - fix peer flow lists corruption - iwlwifi: fix a memory corruption Previous releases - always broken: - netfilter: - nft_chain_filter: handle NETDEV_UNREGISTER for inet/ingress basechain - nft_limit: reject configurations that cause integer overflow - bpf: fix bpf_xdp_adjust_tail() with XSK zero-copy mbuf, avoiding a NULL pointer dereference upon shrinking - llc: make llc_ui_sendmsg() more robust against bonding changes - smc: fix illegal rmb_desc access in SMC-D connection dump - dpll: fix pin dump crash for rebound module - bnxt_en: fix possible crash after creating sw mqprio TCs - hv_netvsc: calculate correct ring size when PAGE_SIZE is not 4kB Misc: - several self-tests fixes for better integration with the netdev CI - added several missing modules descriptions" * tag 'net-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits) tsnep: Fix XDP_RING_NEED_WAKEUP for empty fill ring tsnep: Remove FCS for XDP data path net: fec: fix the unhandled context fault from smmu selftests: bonding: do not test arp/ns target with mode balance-alb/tlb fjes: fix memleaks in fjes_hw_setup i40e: update xdp_rxq_info::frag_size for ZC enabled Rx queue i40e: set xdp_rxq_info::frag_size xdp: reflect tail increase for MEM_TYPE_XSK_BUFF_POOL ice: update xdp_rxq_info::frag_size for ZC enabled Rx queue intel: xsk: initialize skb_frag_t::bv_offset in ZC drivers ice: remove redundant xdp_rxq_info registration i40e: handle multi-buffer packets that are shrunk by xdp prog ice: work on pre-XDP prog frag count xsk: fix usage of multi-buffer BPF helpers for ZC XDP xsk: make xsk_buff_pool responsible for clearing xdp_buff::flags xsk: recycle buffer in case Rx queue was full net: fill in MODULE_DESCRIPTION()s for rvu_mbox net: fill in MODULE_DESCRIPTION()s for litex net: fill in MODULE_DESCRIPTION()s for fsl_pq_mdio net: fill in MODULE_DESCRIPTION()s for fec ...
2024-01-25Merge tag 'vfs-6.8-rc2.netfs' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull netfs fixes from Christian Brauner: "This contains various fixes for the netfs work merged earlier this cycle: afs: - Fix locking imbalance in afs_proc_addr_prefs_show() - Remove afs_dynroot_d_revalidate() which is redundant - Fix error handling during lookup - Hide sillyrenames from userspace. This fixes a race between silly-rename files being created/removed and userspace iterating over directory entries - Don't use unnecessary folio_*() functions cifs: - Don't use unnecessary folio_*() functions cachefiles: - erofs: Fix Null dereference when cachefiles are not doing ondemand-mode - Update mailing list netfs library: - Add Jeff Layton as reviewer - Update mailing list - Fix a error checking in netfs_perform_write() - fscache: Check error before dereferencing - Don't use unnecessary folio_*() functions" * tag 'vfs-6.8-rc2.netfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: afs: Fix missing/incorrect unlocking of RCU read lock afs: Remove afs_dynroot_d_revalidate() as it is redundant afs: Fix error handling with lookup via FS.InlineBulkStatus afs: Hide silly-rename files from userspace cachefiles, erofs: Fix NULL deref in when cachefiles is not doing ondemand-mode netfs: Fix a NULL vs IS_ERR() check in netfs_perform_write() netfs, fscache: Prevent Oops in fscache_put_cache() cifs: Don't use certain unnecessary folio_*() functions afs: Don't use certain unnecessary folio_*() functions netfs: Don't use certain unnecessary folio_*() functions netfs: Add Jeff Layton as reviewer netfs, cachefiles: Change mailing list
2024-01-25Merge tag 'mlx5-fixes-2024-01-24' of ↵Paolo Abeni
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes 2024-01-24 This series provides bug fixes to mlx5 driver. Please pull and let me know if there is any problem. * tag 'mlx5-fixes-2024-01-24' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5e: fix a potential double-free in fs_any_create_groups net/mlx5e: fix a double-free in arfs_create_groups net/mlx5e: Ignore IPsec replay window values on sender side net/mlx5e: Allow software parsing when IPsec crypto is enabled net/mlx5: Use mlx5 device constant for selecting CQ period mode for ASO net/mlx5: DR, Can't go to uplink vport on RX rule net/mlx5: DR, Use the right GVMI number for drop action net/mlx5: Bridge, fix multicast packets sent to uplink net/mlx5: Fix a WARN upon a callback command failure net/mlx5e: Fix peer flow lists handling net/mlx5e: Fix inconsistent hairpin RQT sizes net/mlx5e: Fix operation precedence bug in port timestamping napi_poll context net/mlx5: Fix query of sd_group field net/mlx5e: Use the correct lag ports number when creating TISes ==================== Link: https://lore.kernel.org/r/20240124081855.115410-1-saeed@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-01-25Merge tag 'for-netdev' of ↵Paolo Abeni
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf Daniel Borkmann says: ==================== pull-request: bpf 2024-01-25 The following pull-request contains BPF updates for your *net* tree. We've added 12 non-merge commits during the last 2 day(s) which contain a total of 13 files changed, 190 insertions(+), 91 deletions(-). The main changes are: 1) Fix bpf_xdp_adjust_tail() in context of XSK zero-copy drivers which support XDP multi-buffer. The former triggered a NULL pointer dereference upon shrinking, from Maciej Fijalkowski & Tirthendu Sarkar. 2) Fix a bug in riscv64 BPF JIT which emitted a wrong prologue and epilogue for struct_ops programs, from Pu Lehui. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: i40e: update xdp_rxq_info::frag_size for ZC enabled Rx queue i40e: set xdp_rxq_info::frag_size xdp: reflect tail increase for MEM_TYPE_XSK_BUFF_POOL ice: update xdp_rxq_info::frag_size for ZC enabled Rx queue intel: xsk: initialize skb_frag_t::bv_offset in ZC drivers ice: remove redundant xdp_rxq_info registration i40e: handle multi-buffer packets that are shrunk by xdp prog ice: work on pre-XDP prog frag count xsk: fix usage of multi-buffer BPF helpers for ZC XDP xsk: make xsk_buff_pool responsible for clearing xdp_buff::flags xsk: recycle buffer in case Rx queue was full riscv, bpf: Fix unpredictable kernel crash about RV64 struct_ops ==================== Link: https://lore.kernel.org/r/20240125084416.10876-1-daniel@iogearbox.net Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-01-24xsk: fix usage of multi-buffer BPF helpers for ZC XDPMaciej Fijalkowski
Currently when packet is shrunk via bpf_xdp_adjust_tail() and memory type is set to MEM_TYPE_XSK_BUFF_POOL, null ptr dereference happens: [1136314.192256] BUG: kernel NULL pointer dereference, address: 0000000000000034 [1136314.203943] #PF: supervisor read access in kernel mode [1136314.213768] #PF: error_code(0x0000) - not-present page [1136314.223550] PGD 0 P4D 0 [1136314.230684] Oops: 0000 [#1] PREEMPT SMP NOPTI [1136314.239621] CPU: 8 PID: 54203 Comm: xdpsock Not tainted 6.6.0+ #257 [1136314.250469] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [1136314.265615] RIP: 0010:__xdp_return+0x6c/0x210 [1136314.274653] Code: ad 00 48 8b 47 08 49 89 f8 a8 01 0f 85 9b 01 00 00 0f 1f 44 00 00 f0 41 ff 48 34 75 32 4c 89 c7 e9 79 cd 80 ff 83 fe 03 75 17 <f6> 41 34 01 0f 85 02 01 00 00 48 89 cf e9 22 cc 1e 00 e9 3d d2 86 [1136314.302907] RSP: 0018:ffffc900089f8db0 EFLAGS: 00010246 [1136314.312967] RAX: ffffc9003168aed0 RBX: ffff8881c3300000 RCX: 0000000000000000 [1136314.324953] RDX: 0000000000000000 RSI: 0000000000000003 RDI: ffffc9003168c000 [1136314.336929] RBP: 0000000000000ae0 R08: 0000000000000002 R09: 0000000000010000 [1136314.348844] R10: ffffc9000e495000 R11: 0000000000000040 R12: 0000000000000001 [1136314.360706] R13: 0000000000000524 R14: ffffc9003168aec0 R15: 0000000000000001 [1136314.373298] FS: 00007f8df8bbcb80(0000) GS:ffff8897e0e00000(0000) knlGS:0000000000000000 [1136314.386105] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1136314.396532] CR2: 0000000000000034 CR3: 00000001aa912002 CR4: 00000000007706f0 [1136314.408377] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [1136314.420173] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [1136314.431890] PKRU: 55555554 [1136314.439143] Call Trace: [1136314.446058] <IRQ> [1136314.452465] ? __die+0x20/0x70 [1136314.459881] ? page_fault_oops+0x15b/0x440 [1136314.468305] ? exc_page_fault+0x6a/0x150 [1136314.476491] ? asm_exc_page_fault+0x22/0x30 [1136314.484927] ? __xdp_return+0x6c/0x210 [1136314.492863] bpf_xdp_adjust_tail+0x155/0x1d0 [1136314.501269] bpf_prog_ccc47ae29d3b6570_xdp_sock_prog+0x15/0x60 [1136314.511263] ice_clean_rx_irq_zc+0x206/0xc60 [ice] [1136314.520222] ? ice_xmit_zc+0x6e/0x150 [ice] [1136314.528506] ice_napi_poll+0x467/0x670 [ice] [1136314.536858] ? ttwu_do_activate.constprop.0+0x8f/0x1a0 [1136314.546010] __napi_poll+0x29/0x1b0 [1136314.553462] net_rx_action+0x133/0x270 [1136314.561619] __do_softirq+0xbe/0x28e [1136314.569303] do_softirq+0x3f/0x60 This comes from __xdp_return() call with xdp_buff argument passed as NULL which is supposed to be consumed by xsk_buff_free() call. To address this properly, in ZC case, a node that represents the frag being removed has to be pulled out of xskb_list. Introduce appropriate xsk helpers to do such node operation and use them accordingly within bpf_xdp_adjust_tail(). Fixes: 24ea50127ecf ("xsk: support mbuf on ZC RX") Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> # For the xsk header part Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/20240124191602.566724-4-maciej.fijalkowski@intel.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-01-24xsk: make xsk_buff_pool responsible for clearing xdp_buff::flagsMaciej Fijalkowski
XDP multi-buffer support introduced XDP_FLAGS_HAS_FRAGS flag that is used by drivers to notify data path whether xdp_buff contains fragments or not. Data path looks up mentioned flag on first buffer that occupies the linear part of xdp_buff, so drivers only modify it there. This is sufficient for SKB and XDP_DRV modes as usually xdp_buff is allocated on stack or it resides within struct representing driver's queue and fragments are carried via skb_frag_t structs. IOW, we are dealing with only one xdp_buff. ZC mode though relies on list of xdp_buff structs that is carried via xsk_buff_pool::xskb_list, so ZC data path has to make sure that fragments do *not* have XDP_FLAGS_HAS_FRAGS set. Otherwise, xsk_buff_free() could misbehave if it would be executed against xdp_buff that carries a frag with XDP_FLAGS_HAS_FRAGS flag set. Such scenario can take place when within supplied XDP program bpf_xdp_adjust_tail() is used with negative offset that would in turn release the tail fragment from multi-buffer frame. Calling xsk_buff_free() on tail fragment with XDP_FLAGS_HAS_FRAGS would result in releasing all the nodes from xskb_list that were produced by driver before XDP program execution, which is not what is intended - only tail fragment should be deleted from xskb_list and then it should be put onto xsk_buff_pool::free_list. Such multi-buffer frame will never make it up to user space, so from AF_XDP application POV there would be no traffic running, however due to free_list getting constantly new nodes, driver will be able to feed HW Rx queue with recycled buffers. Bottom line is that instead of traffic being redirected to user space, it would be continuously dropped. To fix this, let us clear the mentioned flag on xsk_buff_pool side during xdp_buff initialization, which is what should have been done right from the start of XSK multi-buffer support. Fixes: 1bbc04de607b ("ice: xsk: add RX multi-buffer support") Fixes: 1c9ba9c14658 ("i40e: xsk: add RX multi-buffer support") Fixes: 24ea50127ecf ("xsk: support mbuf on ZC RX") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/20240124191602.566724-3-maciej.fijalkowski@intel.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-01-24Merge tag 'execve-v6.8-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull execve fixes from Kees Cook: - Fix error handling in begin_new_exec() (Bernd Edlinger) - MAINTAINERS: specifically mention ELF (Alexey Dobriyan) - Various cleanups related to earlier open() (Askar Safin, Kees Cook) * tag 'execve-v6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: exec: Distinguish in_execve from in_exec exec: Fix error handling in begin_new_exec() exec: Add do_close_execat() helper exec: remove useless comment ELF, MAINTAINERS: specifically mention ELF
2024-01-24exec: Distinguish in_execve from in_execKees Cook
Just to help distinguish the fs->in_exec flag from the current->in_execve flag, add comments in check_unsafe_exec() and copy_fs() for more context. Also note that in_execve is only used by TOMOYO now. Cc: Kentaro Takeda <takedakn@nttdata.co.jp> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <brauner@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: linux-fsdevel@vger.kernel.org Cc: linux-mm@kvack.org Signed-off-by: Kees Cook <keescook@chromium.org>
2024-01-24netfilter: nf_tables: cleanup documentationGeorge Guo
- Correct comments for nlpid, family, udlen and udata in struct nft_table, and afinfo is no longer a member of enum nft_set_class. - Add comment for data in struct nft_set_elem. - Add comment for flags in struct nft_ctx. - Add comments for timeout in struct nft_set_iter, and flags is not a member of struct nft_set_iter, remove the comment for it. - Add comments for commit, abort, estimate and gc_init in struct nft_set_ops. - Add comments for pending_update, num_exprs, exprs and catchall_list in struct nft_set. - Add comment for ext_len in struct nft_set_ext_tmpl. - Add comment for inner_ops in struct nft_expr_type. - Add comments for clone, destroy_clone, reduce, gc, offload, offload_action, offload_stats in struct nft_expr_ops. - Add comments for blob_gen_0, blob_gen_1, bound, genmask, udlen, udata, blob_next in struct nft_chain. - Add comment for flags in struct nft_base_chain. - Add comments for udlen, udata in struct nft_object. - Add comment for type in struct nft_object_ops. - Add comment for hook_list in struct nft_flowtable, and remove comments for dev_name and ops which are not members of struct nft_flowtable. Signed-off-by: George Guo <guodongtai@kylinos.cn> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-01-24spi: Raise limit on number of chip selectsMark Brown
As reported by Guenter the limit we've got on the number of chip selects is set too low for some systems, raise the limit. We should really remove the hard coded limit but this is needed as a fix so let's do the simple thing and raise the limit for now. Fixes: 4d8ff6b0991d ("spi: Add multi-cs memories support in SPI core") Reported-by: Guenter Roeck <linux@roeck-us.net> Suggested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://msgid.link/r/20240124-spi-multi-cs-max-v2-1-df6fc5ab1abc@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2024-01-24x86/entry/ia32: Ensure s32 is sign extended to s64Richard Palethorpe
Presently ia32 registers stored in ptregs are unconditionally cast to unsigned int by the ia32 stub. They are then cast to long when passed to __se_sys*, but will not be sign extended. This takes the sign of the syscall argument into account in the ia32 stub. It still casts to unsigned int to avoid implementation specific behavior. However then casts to int or unsigned int as necessary. So that the following cast to long sign extends the value. This fixes the io_pgetevents02 LTP test when compiled with -m32. Presently the systemcall io_pgetevents_time64() unexpectedly accepts -1 for the maximum number of events. It doesn't appear other systemcalls with signed arguments are effected because they all have compat variants defined and wired up. Fixes: ebeb8c82ffaf ("syscalls/x86: Use 'struct pt_regs' based syscall calling for IA32_EMULATION and x32") Suggested-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Richard Palethorpe <rpalethorpe@suse.com> Signed-off-by: Nikolay Borisov <nik.borisov@suse.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240110130122.3836513-1-nik.borisov@suse.com Link: https://lore.kernel.org/ltp/20210921130127.24131-1-rpalethorpe@suse.com/
2024-01-24net/mlx5: Bridge, fix multicast packets sent to uplinkMoshe Shemesh
To enable multicast packets which are offloaded in bridge multicast offload mode to be sent also to uplink, FTE bit uplink_hairpin_en should be set. Add this bit to FTE for the bridge multicast offload rules. Fixes: 18c2916cee12 ("net/mlx5: Bridge, snoop igmp/mld packets") Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-01-24net/mlx5: Fix query of sd_group fieldTariq Toukan
The sd_group field moved in the HW spec from the MPIR register to the vport context. Align the query accordingly. Fixes: f5e956329960 ("net/mlx5: Expose Management PCIe Index Register (MPIR)") Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-01-24net/mlx5e: Use the correct lag ports number when creating TISesSaeed Mahameed
The cited commit moved the code of mlx5e_create_tises() and changed the loop to create TISes over MLX5_MAX_PORTS constant value, instead of getting the correct lag ports supported by the device, which can cause FW errors on devices with less than MLX5_MAX_PORTS ports. Change that back to mlx5e_get_num_lag_ports(mdev). Also IPoIB interfaces create there own TISes, they don't use the eth TISes, pass a flag to indicate that. This fixes the following errors that might appear in kernel log: mlx5_cmd_out_err:808:(pid 650): CREATE_TIS(0x912) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x595b5d), err(-22) mlx5e_create_mdev_resources:174:(pid 650): alloc tises failed, -22 Fixes: b25bd37c859f ("net/mlx5: Move TISes from priv to mdev HW resources") Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2024-01-24net/sched: flower: Fix chain template offloadIdo Schimmel
When a qdisc is deleted from a net device the stack instructs the underlying driver to remove its flow offload callback from the associated filter block using the 'FLOW_BLOCK_UNBIND' command. The stack then continues to replay the removal of the filters in the block for this driver by iterating over the chains in the block and invoking the 'reoffload' operation of the classifier being used. In turn, the classifier in its 'reoffload' operation prepares and emits a 'FLOW_CLS_DESTROY' command for each filter. However, the stack does not do the same for chain templates and the underlying driver never receives a 'FLOW_CLS_TMPLT_DESTROY' command when a qdisc is deleted. This results in a memory leak [1] which can be reproduced using [2]. Fix by introducing a 'tmplt_reoffload' operation and have the stack invoke it with the appropriate arguments as part of the replay. Implement the operation in the sole classifier that supports chain templates (flower) by emitting the 'FLOW_CLS_TMPLT_{CREATE,DESTROY}' command based on whether a flow offload callback is being bound to a filter block or being unbound from one. As far as I can tell, the issue happens since cited commit which reordered tcf_block_offload_unbind() before tcf_block_flush_all_chains() in __tcf_block_put(). The order cannot be reversed as the filter block is expected to be freed after flushing all the chains. [1] unreferenced object 0xffff888107e28800 (size 2048): comm "tc", pid 1079, jiffies 4294958525 (age 3074.287s) hex dump (first 32 bytes): b1 a6 7c 11 81 88 ff ff e0 5b b3 10 81 88 ff ff ..|......[...... 01 00 00 00 00 00 00 00 e0 aa b0 84 ff ff ff ff ................ backtrace: [<ffffffff81c06a68>] __kmem_cache_alloc_node+0x1e8/0x320 [<ffffffff81ab374e>] __kmalloc+0x4e/0x90 [<ffffffff832aec6d>] mlxsw_sp_acl_ruleset_get+0x34d/0x7a0 [<ffffffff832bc195>] mlxsw_sp_flower_tmplt_create+0x145/0x180 [<ffffffff832b2e1a>] mlxsw_sp_flow_block_cb+0x1ea/0x280 [<ffffffff83a10613>] tc_setup_cb_call+0x183/0x340 [<ffffffff83a9f85a>] fl_tmplt_create+0x3da/0x4c0 [<ffffffff83a22435>] tc_ctl_chain+0xa15/0x1170 [<ffffffff838a863c>] rtnetlink_rcv_msg+0x3cc/0xed0 [<ffffffff83ac87f0>] netlink_rcv_skb+0x170/0x440 [<ffffffff83ac6270>] netlink_unicast+0x540/0x820 [<ffffffff83ac6e28>] netlink_sendmsg+0x8d8/0xda0 [<ffffffff83793def>] ____sys_sendmsg+0x30f/0xa80 [<ffffffff8379d29a>] ___sys_sendmsg+0x13a/0x1e0 [<ffffffff8379d50c>] __sys_sendmsg+0x11c/0x1f0 [<ffffffff843b9ce0>] do_syscall_64+0x40/0xe0 unreferenced object 0xffff88816d2c0400 (size 1024): comm "tc", pid 1079, jiffies 4294958525 (age 3074.287s) hex dump (first 32 bytes): 40 00 00 00 00 00 00 00 57 f6 38 be 00 00 00 00 @.......W.8..... 10 04 2c 6d 81 88 ff ff 10 04 2c 6d 81 88 ff ff ..,m......,m.... backtrace: [<ffffffff81c06a68>] __kmem_cache_alloc_node+0x1e8/0x320 [<ffffffff81ab36c1>] __kmalloc_node+0x51/0x90 [<ffffffff81a8ed96>] kvmalloc_node+0xa6/0x1f0 [<ffffffff82827d03>] bucket_table_alloc.isra.0+0x83/0x460 [<ffffffff82828d2b>] rhashtable_init+0x43b/0x7c0 [<ffffffff832aed48>] mlxsw_sp_acl_ruleset_get+0x428/0x7a0 [<ffffffff832bc195>] mlxsw_sp_flower_tmplt_create+0x145/0x180 [<ffffffff832b2e1a>] mlxsw_sp_flow_block_cb+0x1ea/0x280 [<ffffffff83a10613>] tc_setup_cb_call+0x183/0x340 [<ffffffff83a9f85a>] fl_tmplt_create+0x3da/0x4c0 [<ffffffff83a22435>] tc_ctl_chain+0xa15/0x1170 [<ffffffff838a863c>] rtnetlink_rcv_msg+0x3cc/0xed0 [<ffffffff83ac87f0>] netlink_rcv_skb+0x170/0x440 [<ffffffff83ac6270>] netlink_unicast+0x540/0x820 [<ffffffff83ac6e28>] netlink_sendmsg+0x8d8/0xda0 [<ffffffff83793def>] ____sys_sendmsg+0x30f/0xa80 [2] # tc qdisc add dev swp1 clsact # tc chain add dev swp1 ingress proto ip chain 1 flower dst_ip 0.0.0.0/32 # tc qdisc del dev swp1 clsact # devlink dev reload pci/0000:06:00.0 Fixes: bbf73830cd48 ("net: sched: traverse chains in block with tcf_get_next_chain()") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-23nvmet: unify aer type enumGuixin Liu
The host and target use two definition of aer type, unify them into a single one. Signed-off-by: Guixin Liu <kanie@linux.alibaba.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org>
2024-01-22afs: Fix error handling with lookup via FS.InlineBulkStatusDavid Howells
When afs does a lookup, it tries to use FS.InlineBulkStatus to preemptively look up a bunch of files in the parent directory and cache this locally, on the basis that we might want to look at them too (for example if someone does an ls on a directory, they may want want to then stat every file listed). FS.InlineBulkStatus can be considered a compound op with the normal abort code applying to the compound as a whole. Each status fetch within the compound is then given its own individual abort code - but assuming no error that prevents the bulk fetch from returning the compound result will be 0, even if all the constituent status fetches failed. At the conclusion of afs_do_lookup(), we should use the abort code from the appropriate status to determine the error to return, if any - but instead it is assumed that we were successful if the op as a whole succeeded and we return an incompletely initialised inode, resulting in ENOENT, no matter the actual reason. In the particular instance reported, a vnode with no permission granted to be accessed is being given a UAEACCES abort code which should be reported as EACCES, but is instead being reported as ENOENT. Fix this by abandoning the inode (which will be cleaned up with the op) if file[1] has an abort code indicated and turn that abort code into an error instead. Whilst we're at it, add a tracepoint so that the abort codes of the individual subrequests of FS.InlineBulkStatus can be logged. At the moment only the container abort code can be 0. Fixes: e49c7b2f6de7 ("afs: Build an abstraction around an "operation" concept") Reported-by: Jeffrey Altman <jaltman@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org
2024-01-22Merge tag 'for-6.8-rc1-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: - zoned mode fixes: - fix slowdown when writing large file sequentially by looking up block groups with enough space faster - locking fixes when activating a zone - new mount API fixes: - preserve mount options for a ro/rw mount of the same subvolume - scrub fixes: - fix use-after-free in case the chunk length is not aligned to 64K, this does not happen normally but has been reported on images converted from ext4 - similar alignment check was missing with raid-stripe-tree - subvolume deletion fixes: - prevent calling ioctl on already deleted subvolume - properly track flag tracking a deleted subvolume - in subpage mode, fix decompression of an inline extent (zlib, lzo, zstd) - fix crash when starting writeback on a folio, after integration with recent MM changes this needs to be started conditionally - reject unknown flags in defrag ioctl - error handling, API fixes, minor warning fixes * tag 'for-6.8-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: scrub: limit RST scrub to chunk boundary btrfs: scrub: avoid use-after-free when chunk length is not 64K aligned btrfs: don't unconditionally call folio_start_writeback in subpage btrfs: use the original mount's mount options for the legacy reconfigure btrfs: don't warn if discard range is not aligned to sector btrfs: tree-checker: fix inline ref size in error messages btrfs: zstd: fix and simplify the inline extent decompression btrfs: lzo: fix and simplify the inline extent decompression btrfs: zlib: fix and simplify the inline extent decompression btrfs: defrag: reject unknown flags of btrfs_ioctl_defrag_range_args btrfs: avoid copying BTRFS_ROOT_SUBVOL_DEAD flag to snapshot of subvolume being deleted btrfs: don't abort filesystem when attempting to snapshot deleted subvolume btrfs: zoned: fix lock ordering in btrfs_zone_activate() btrfs: fix unbalanced unlock of mapping_tree_lock btrfs: ref-verify: free ref cache before clearing mount opt btrfs: fix kvcalloc() arguments order in btrfs_ioctl_send() btrfs: zoned: optimize hint byte for zoned allocator btrfs: zoned: factor out prepare_allocation_zoned()
2024-01-22ata: libata-sata: improve sysfs description for ATA_LPM_UNKNOWNNiklas Cassel
Currently, both ATA_LPM_UNKNOWN (0) and ATA_LPM_MAX_POWER (1) displays as "max_performance" in sysfs. This is quite misleading as they are not the same. For ATA_LPM_UNKNOWN, ata_eh_set_lpm() will not be called at all, leaving the configuration in unknown state. For ATA_LPM_MAX_POWER, ata_eh_set_lpm() is called, and setting the policy to ATA_LPM_MAX_POWER. This also matches the description of the SATA_MOBILE_LPM_POLICY Kconfig: 0 => Keep firmware settings 1 => Maximum performance Thus, update the sysfs description for ATA_LPM_UNKNOWN to match reality. While at it, update libata.h to mention that the ascii descriptions are in libata-sata.c and not in libata-scsi.c. Reviewed-by: Damien Le Moal <dlemoal@kernel.org> Signed-off-by: Niklas Cassel <cassel@kernel.org>
2024-01-22iio: adc: ad_sigma_delta: ensure proper DMA alignmentNuno Sa
Aligning the buffer to the L1 cache is not sufficient in some platforms as they might have larger cacheline sizes for caches after L1 and thus, we can't guarantee DMA safety. That was the whole reason to introduce IIO_DMA_MINALIGN in [1]. Do the same for the sigma_delta ADCs. [1]: https://lore.kernel.org/linux-iio/20220508175712.647246-2-jic23@kernel.org/ Fixes: 0fb6ee8d0b5e ("iio: ad_sigma_delta: Don't put SPI transfer buffer on the stack") Signed-off-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20240117-dev_sigma_delta_no_irq_flags-v1-1-db39261592cf@analog.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-01-22iio: imu: adis: ensure proper DMA alignmentNuno Sa
Aligning the buffer to the L1 cache is not sufficient in some platforms as they might have larger cacheline sizes for caches after L1 and thus, we can't guarantee DMA safety. That was the whole reason to introduce IIO_DMA_MINALIGN in [1]. Do the same for the sigma_delta ADCs. [1]: https://lore.kernel.org/linux-iio/20220508175712.647246-2-jic23@kernel.org/ Fixes: ccd2b52f4ac6 ("staging:iio: Add common ADIS library") Signed-off-by: Nuno Sa <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20240117-adis-improv-v1-1-7f90e9fad200@analog.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-01-22accel/ivpu: Deprecate DRM_IVPU_PARAM_CONTEXT_PRIORITY paramWachowski, Karol
DRM_IVPU_PARAM_CONTEXT_PRIORITY has been deprecated because it has been replaced with DRM_IVPU_JOB_PRIORITY levels set with submit IOCTL and was unused anyway. Signed-off-by: Wachowski, Karol <karol.wachowski@intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240115134434.493839-10-jacek.lawrynowicz@linux.intel.com
2024-01-21Merge tag 'header_cleanup-2024-01-20' of https://evilpiepirate.org/git/bcachefsLinus Torvalds
Pull header fix from Kent Overstreet: "Just one small fixup for the RT build" * tag 'header_cleanup-2024-01-20' of https://evilpiepirate.org/git/bcachefs: spinlock: Fix failing build for PREEMPT_RT
2024-01-21udp: fix busy pollingEric Dumazet
Generic sk_busy_loop_end() only looks at sk->sk_receive_queue for presence of packets. Problem is that for UDP sockets after blamed commit, some packets could be present in another queue: udp_sk(sk)->reader_queue In some cases, a busy poller could spin until timeout expiration, even if some packets are available in udp_sk(sk)->reader_queue. v3: - make sk_busy_loop_end() nicer (Willem) v2: - add a READ_ONCE(sk->sk_family) in sk_is_inet() to avoid KCSAN splats. - add a sk_is_inet() check in sk_is_udp() (Willem feedback) - add a sk_is_inet() check in sk_is_tcp(). Fixes: 2276f58ac589 ("udp: use a separate rx queue for packet reception") Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-01-20Merge tag 'dmaengine-fix-6.8-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine Pull dmaengine updates from Vinod Koul: "New support: - Loongson LS2X APB DMA controller - sf-pdma: mpfs-pdma support - Qualcomm X1E80100 GPI dma controller support Updates: - Xilinx XDMA updates to support interleaved DMA transfers - TI PSIL threads for AM62P and J722S and cfg register regions description - axi-dmac Improving the cyclic DMA transfers - Tegra Support dma-channel-mask property - Remaining platform remove callback returning void conversions Driver fixes for: - Xilinx xdma driver operator precedence and initialization fix - Excess kernel-doc warning fix in imx-sdma xilinx xdma drivers - format-overflow warning fix for rz-dmac, sh usb dmac drivers - 'output may be truncated' fix for shdma, fsl-qdma and dw-edma drivers" * tag 'dmaengine-fix-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (58 commits) dmaengine: dw-edma: increase size of 'name' in debugfs code dmaengine: fsl-qdma: increase size of 'irq_name' dmaengine: shdma: increase size of 'dev_id' dmaengine: xilinx: xdma: Fix kernel-doc warnings dmaengine: usb-dmac: Avoid format-overflow warning dmaengine: sh: rz-dmac: Avoid format-overflow warning dmaengine: imx-sdma: fix Excess kernel-doc warnings dmaengine: xilinx: xdma: Fix initialization location of desc in xdma_channel_isr() dmaengine: xilinx: xdma: Fix operator precedence in xdma_prep_interleaved_dma() dmaengine: xilinx: xdma: statify xdma_prep_interleaved_dma dmaengine: xilinx: xdma: Workaround truncation compilation error dmaengine: pl330: issue_pending waits until WFP state dmaengine: xilinx: xdma: Implement interleaved DMA transfers dmaengine: xilinx: xdma: Prepare the introduction of interleaved DMA transfers dmaengine: xilinx: xdma: Add transfer error reporting dmaengine: xilinx: xdma: Add error checking in xdma_channel_isr() dmaengine: xilinx: xdma: Rework xdma_terminate_all() dmaengine: xilinx: xdma: Ease dma_pool alignment requirements dmaengine: xilinx: xdma: Add necessary macro definitions dmaengine: xilinx: xdma: Get rid of unused code ...
generated by cgit (git 2.34.1) at 2025-09-11 04:20:39 +0000