summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2016-09-27serial: 8250: Set Altera 16550 TX FIFO ThresholdThor Thayer
The Altera 16550 soft IP UART requires 2 additional registers for TX FIFO threshold support. These 2 registers enable the TX FIFO Low Watermark and set the TX FIFO Low Watermark. Set the TX FIFO threshold to the FIFO size - tx_loadsz. Signed-off-by: Thor Thayer <tthayer@opensource.altera.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27tty/serial: atmel: fix fractional baud rate computationAlexey Starikovskiy
The problem with previous code was it rounded values in wrong place and produced wrong baud rate in some cases. Signed-off-by: Alexey Starikovskiy <aystarik@gmail.com> [nicolas.ferre@atmel.com: port to newer kernel and add commit log] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27Drivers: hv: get rid of id in struct vmbus_channelVitaly Kuznetsov
The auto incremented counter is not being used anymore, get rid of it. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27mcb: Add a dma_device to mcb_deviceMichael Moese
When performing DMA operations on a MCB device, the device needed for using the DMA API is "mcb_device->bus_carrier". This is rather lengthy, so a shortcut is introduced to struct mcb_device in order to ensure the MCB device driver uses the correct device for DMA operations. Signed-off-by: Michael Moese <michael.moese@men.de> Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-27fs: rename "rename2" i_op to "rename"Miklos Szeredi
Generated patch: sed -i "s/\.rename2\t/\.rename\t\t/" `git grep -wl rename2` sed -i "s/\brename2\b/rename/g" `git grep -wl rename2` Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-09-27vfs: remove unused i_op->renameMiklos Szeredi
No in-tree uses remain. Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2016-09-27libfs: support RENAME_NOREPLACE in simple_rename()Miklos Szeredi
This is trivial to do: - add flags argument to simple_rename() - check if flags doesn't have any other than RENAME_NOREPLACE - assign simple_rename() to .rename2 instead of .rename Filesystems converted: hugetlbfs, ramfs, bpf. Debugfs uses simple_rename() to implement debugfs_rename(), which is for debugfs instances to rename files internally, not for userspace filesystem access. For this case pass zero flags to simple_rename(). Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Alexei Starovoitov <ast@kernel.org>
2016-09-27video: fbdev: exynos: Remove old non-working MIPI driverKrzysztof Kozlowski
The old non-DRM Exynos MIPI driver does not support DeviceTree and requires board files. Our platforms do not provide such so the driver is not usable since a long time ago. All features provided by the driver (and associated s6e8ax0 panel driver) are already supported by newer DRM version so the old code can be removed. Cc: Inki Dae <inki.dae@samsung.com> Cc: Donghwa Lee <dh09.lee@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2016-09-27thermal: Enhance thermal_zone_device_update for eventsSrinivas Pandruvada
Added one additional parameter to thermal_zone_device_update() to provide caller with an optional capability to specify reason. Currently this event is used by user space governor to trigger different processing based on event code. Also it saves an additional call to read temperature when the event is received. The following events are cuurently defined: - Unspecified event - New temperature sample - Trip point violated - Trip point changed - thermal device up and down - thermal device power capability changed Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27Merge branches 'thermal-soc', 'thermal-core', 'thermal-intel' and ↵Zhang Rui
'thermal-tegra-hw-throttle' into next
2016-09-27thermal: tegra: add hw-throttle for Tegra132Wei Ni
Tegra132 use CCROC throttle registers to configure pulse skiper, set these registers to enable throttle function for Tegra132. Signed-off-by: Wei Ni <wni@nvidia.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: streamline get_trend callbacksSascha Hauer
The .get_trend callback in struct thermal_zone_device_ops has the prototype: int (*get_trend) (struct thermal_zone_device *, int, enum thermal_trend *); whereas the .get_trend callback in struct thermal_zone_of_device_ops has: int (*get_trend)(void *, long *); Streamline both prototypes and add the trip argument to the OF callback aswell and use enum thermal_trend * instead of an integer pointer. While the OF prototype may be the better one, this should be decided at framework level and not on OF level. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: linux-pm@vger.kernel.org Reviewed-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: of: implement .set_trips for device tree thermal zonesSascha Hauer
This patch implements .set_trips for device tree thermal zones. As the hardware-tracked trip points is supported by thermal core patch[0]. patch[0] "thermal: Add support for hardware-tracked trip points". Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Reviewed-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: Add support for hardware-tracked trip pointsSascha Hauer
This adds support for hardware-tracked trip points to the device tree thermal sensor framework. The framework supports an arbitrary number of trip points. Whenever the current temperature is updated, the trip points immediately below and above the current temperature are found. A .set_trips callback is then called with the temperatures. If there is no trip point above or below the current temperature, the passed trip temperature will be -INT_MAX or INT_MAX respectively. In this callback, the driver should program the hardware such that it is notified when either of these trip points are triggered. When a trip point is triggered, the driver should call `thermal_zone_device_update' for the respective thermal zone. This will cause the trip points to be updated again. If .set_trips is not implemented, the framework behaves as before. This patch is based on an earlier version from Mikko Perttunen <mikko.perttunen@kapsi.fi> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Cc: linux-pm@vger.kernel.org Reviewed-by: Javi Merino <javi.merino@arm.com> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-27thermal: core: export apis to get slope and offsetRajendra Nayak
Add apis for platform thermal drivers to query for slope and offset attributes, which might be needed for temperature calculations. Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org> Signed-off-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Zhang Rui <rui.zhang@intel.com>
2016-09-26scsi: Avoid that toggling use_blk_mq triggers a memory leakBart Van Assche
This patch avoids that the following memory leak is triggered if use_blk_mq is disabled after a SCSI host has been allocated by the ib_srp driver and before the same SCSI host is freed: unreferenced object 0xffff8803a168c568 (size 256): backtrace: [<ffffffff81620c95>] kmemleak_alloc+0x45/0xa0 [<ffffffff811bb104>] __kmalloc_node+0x1e4/0x400 [<ffffffff81309fe4>] blk_mq_alloc_tag_set+0xb4/0x230 [<ffffffff814731b7>] scsi_mq_setup_tags+0xc7/0xd0 [<ffffffff81469c26>] scsi_add_host_with_dma+0x216/0x2d0 [<ffffffffa064bef5>] srp_create_target+0xe55/0x13d0 [ib_srp] [<ffffffff8143ce23>] dev_attr_store+0x13/0x20 [<ffffffff8125f030>] sysfs_kf_write+0x40/0x50 [<ffffffff8125e397>] kernfs_fop_write+0x137/0x1c0 [<ffffffff811d8c13>] __vfs_write+0x23/0x140 [<ffffffff811d92e0>] vfs_write+0xb0/0x190 [<ffffffff811da5b4>] SyS_write+0x44/0xa0 [<ffffffff8162c8a5>] entry_SYSCALL_64_fastpath+0x18/0xa8 Fixes: 9aa9cc4221f5 ("scsi: remove the disable_blk_mq host flag") Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: <stable@vger.kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-09-26Merge branch 'x86/urgent' into x86/apicThomas Gleixner
Bring in the upstream modifications so we can fixup the silent merge conflict which is introduced by this merge. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-09-26mmc: add define for R1 response without CRCWolfram Sang
The core uses it for polling. Give drivers a proper define handle this case like for other response types. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-09-26mmc: core: Add support for sending commands during data transferAdrian Hunter
A host controller driver exposes its capability using caps flag MMC_CAP_CMD_DURING_TFR. A driver with that capability can accept requests that are marked mrq->cap_cmd_during_tfr = true. Then the driver informs the upper layers when the command line is available for further commands by calling mmc_command_done(). Because of that, the driver will not then automatically send STOP commands, and it is the responsibility of the upper layer to send a STOP command if it is required. For requests submitted through the mmc_wait_for_req() interface, the caller sets mrq->cap_cmd_during_tfr = true which causes mmc_wait_for_req() in fact not to wait. The caller can then send commands that do not use the data lines. Finally the caller can wait for the transfer to complete by calling mmc_wait_for_req_done() which is now exported. For requests submitted through the mmc_start_req() interface, the caller again sets mrq->cap_cmd_during_tfr = true, but mmc_start_req() anyway does not wait. The caller can then send commands that do not use the data lines. Finally the caller can wait for the transfer to complete in the normal way i.e. calling mmc_start_req() again. Irrespective of how a cap_cmd_during_tfr request is started, mmc_is_req_done() can be called if the upper layer needs to determine if the request is done. However the appropriate waiting function (either mmc_wait_for_req_done() or mmc_start_req()) must still be called. The implementation consists primarily of a new completion mrq->cmd_completion which notifies when the command line is available for further commands. That completion is completed by mmc_command_done(). When there is an ongoing data transfer, calls to mmc_wait_for_req() will automatically wait on that completion, so the caller does not have to do anything special. Note, in the case of errors, the driver may call mmc_request_done() without calling mmc_command_done() because mmc_request_done() always calls mmc_command_done(). Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-09-26mmc: dw_mmc: add reset support to dwmmc host controllerGuodong Xu
Dwmmc host controller may in unknown state when entering kernel boot. One example is when booting from eMMC, bootloader need initialize MMC host controller into some state so it can read. In order to make sure MMC host controller in a clean initial state, this reset support is added. With this patch, a 'resets' property can be added into dw_mmc device tree node. The hardware logic is: dwmmc host controller IP receives a reset signal from a 'reset provider' (eg. power management unit). The 'resets' property points to this reset signal. So, during dwmmc driver probe, it can use this signal to reset itself. Refer to [1] for more information. [1] Documentation/devicetree/bindings/reset/reset.txt Signed-off-by: Guodong Xu <guodong.xu@linaro.org> Signed-off-by: Xinwei Kong <kong.kongxinwei@hisilicon.com> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-09-26mmc: sd: Export SD Status via “ssr” device attributeUri Yanai
The SD Status register contains several important fields related to the SD Card proprietary features. Those fields may be used by user space applications for vendor specific usage. None of those fields are exported today by the driver to user space. In this patch, we are reading the SD Status register and exporting (using MMC_DEV_ATTR) the SD Status register to the user space. Signed-off-by: Uri Yanai <uri.yanai@sandisk.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-09-26nfs: add a new NFS4_OPEN_RESULT_MAY_NOTIFY_LOCK constantJeff Layton
As defined in RFC 5661, section 18.16. Signed-off-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2016-09-26dmaengine: s3c24xx: Add dma_slave_map for s3c2440 devicesSam Van Den Berge
This patch updates the s3c24xx dma driver to be able to pass a dma_slave_map array via the platform data. This is needed to be able to use the new, simpler dmaengine API [1]. I used the virtual DMA channels as a parameter for the dma_filter function. By doing that, I could reuse the existing filter function in drivers/dma/s3c24xx-dma.c. I have tested this on my mini2440 board with the audio driver. According to my observations, dma_request_slave_channel in the function dmaengine_pcm_new in the file sound/soc/soc-generic-dmaengine-pcm.c now returns a valid DMA channel whereas before no DMA channel was returned at that point. Entries for DMACH_XD0, DMACH_XD1 and DMACH_TIMER are missing because I don't realy know which driver to use for these. [1] http://lists.infradead.org/pipermail/linux-arm-kernel/2015-December/393635.html Signed-off-by: Sam Van Den Berge <sam.van.den.berge@telenet.be> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-26dmaengine: mmp_tdma: enable COMPILE_TESTVinod Koul
To get more coverage, enable COMPILE_TEST for this driver. While at it, to fix build on other archs, select MMP_SRAM only for ARCH_MMP and also fix the platform header Suggested-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-26dma-mapping: add dma_{map,unmap}_resourceNiklas Söderlund
Map/Unmap a device MMIO resource from a physical address. If no dma_map_ops method is available the operation is a no-op. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-26dma-debug: add support for resource mappingsNiklas Söderlund
A MMIO mapped resource can not be represented by a struct page so a new debug type is needed to handle this. This patch add such type and functionality to add/remove entries and how to translate them to a physical address. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-26dma-mapping: add {map,unmap}_resource to dma_map_opsNiklas Söderlund
Add methods to handle mapping of device resources from a physical address. This is needed for example to be able to map MMIO FIFO registers to a IOMMU. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-09-26ASoC: da7219: Disable AAD if codec is not a wake-up sourceAdam Thomson
Currently if AAD is enabled in the device, during system suspend the feature remains, regardless of whether the codec is a wake-up source or not. This means some additional power is being used which is unnecessary, and can causes issues with some platforms' IRQ handlers where state changes during system suspend aren't captured. This patch updates the driver to disable AAD during suspend, if we're not a wake-up source, and then re-enables this on resume. Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-26Merge branch 'acpica' into acpi-busRafael J. Wysocki
2016-09-26Merge tag 'v4.8-rc8' into ras/core, to pick up fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-09-26cfg80211: add checks for beacon rate, extend to meshJohannes Berg
The previous commit added support for specifying the beacon rate for AP mode. Add features checks to this, and extend it to also support the rate configuration for mesh networks. For IBSS it's not as simple due to joining etc., so that's not yet supported. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-09-26cfg80211: Add support to configure a beacon data ratePurushottam Kushwaha
This allows an option to configure a single beacon tx rate for an AP. Signed-off-by: Purushottam Kushwaha <pkushwah@qti.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-09-25ipmr, ip6mr: fix scheduling while atomic and a deadlock with ipmr_get_routeNikolay Aleksandrov
Since the commit below the ipmr/ip6mr rtnl_unicast() code uses the portid instead of the previous dst_pid which was copied from in_skb's portid. Since the skb is new the portid is 0 at that point so the packets are sent to the kernel and we get scheduling while atomic or a deadlock (depending on where it happens) by trying to acquire rtnl two times. Also since this is RTM_GETROUTE, it can be triggered by a normal user. Here's the sleeping while atomic trace: [ 7858.212557] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:620 [ 7858.212748] in_atomic(): 1, irqs_disabled(): 0, pid: 0, name: swapper/0 [ 7858.212881] 2 locks held by swapper/0/0: [ 7858.213013] #0: (((&mrt->ipmr_expire_timer))){+.-...}, at: [<ffffffff810fbbf5>] call_timer_fn+0x5/0x350 [ 7858.213422] #1: (mfc_unres_lock){+.....}, at: [<ffffffff8161e005>] ipmr_expire_process+0x25/0x130 [ 7858.213807] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.8.0-rc7+ #179 [ 7858.213934] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140531_083030-gandalf 04/01/2014 [ 7858.214108] 0000000000000000 ffff88005b403c50 ffffffff813a7804 0000000000000000 [ 7858.214412] ffffffff81a1338e ffff88005b403c78 ffffffff810a4a72 ffffffff81a1338e [ 7858.214716] 000000000000026c 0000000000000000 ffff88005b403ca8 ffffffff810a4b9f [ 7858.215251] Call Trace: [ 7858.215412] <IRQ> [<ffffffff813a7804>] dump_stack+0x85/0xc1 [ 7858.215662] [<ffffffff810a4a72>] ___might_sleep+0x192/0x250 [ 7858.215868] [<ffffffff810a4b9f>] __might_sleep+0x6f/0x100 [ 7858.216072] [<ffffffff8165bea3>] mutex_lock_nested+0x33/0x4d0 [ 7858.216279] [<ffffffff815a7a5f>] ? netlink_lookup+0x25f/0x460 [ 7858.216487] [<ffffffff8157474b>] rtnetlink_rcv+0x1b/0x40 [ 7858.216687] [<ffffffff815a9a0c>] netlink_unicast+0x19c/0x260 [ 7858.216900] [<ffffffff81573c70>] rtnl_unicast+0x20/0x30 [ 7858.217128] [<ffffffff8161cd39>] ipmr_destroy_unres+0xa9/0xf0 [ 7858.217351] [<ffffffff8161e06f>] ipmr_expire_process+0x8f/0x130 [ 7858.217581] [<ffffffff8161dfe0>] ? ipmr_net_init+0x180/0x180 [ 7858.217785] [<ffffffff8161dfe0>] ? ipmr_net_init+0x180/0x180 [ 7858.217990] [<ffffffff810fbc95>] call_timer_fn+0xa5/0x350 [ 7858.218192] [<ffffffff810fbbf5>] ? call_timer_fn+0x5/0x350 [ 7858.218415] [<ffffffff8161dfe0>] ? ipmr_net_init+0x180/0x180 [ 7858.218656] [<ffffffff810fde10>] run_timer_softirq+0x260/0x640 [ 7858.218865] [<ffffffff8166379b>] ? __do_softirq+0xbb/0x54f [ 7858.219068] [<ffffffff816637c8>] __do_softirq+0xe8/0x54f [ 7858.219269] [<ffffffff8107a948>] irq_exit+0xb8/0xc0 [ 7858.219463] [<ffffffff81663452>] smp_apic_timer_interrupt+0x42/0x50 [ 7858.219678] [<ffffffff816625bc>] apic_timer_interrupt+0x8c/0xa0 [ 7858.219897] <EOI> [<ffffffff81055f16>] ? native_safe_halt+0x6/0x10 [ 7858.220165] [<ffffffff810d64dd>] ? trace_hardirqs_on+0xd/0x10 [ 7858.220373] [<ffffffff810298e3>] default_idle+0x23/0x190 [ 7858.220574] [<ffffffff8102a20f>] arch_cpu_idle+0xf/0x20 [ 7858.220790] [<ffffffff810c9f8c>] default_idle_call+0x4c/0x60 [ 7858.221016] [<ffffffff810ca33b>] cpu_startup_entry+0x39b/0x4d0 [ 7858.221257] [<ffffffff8164f995>] rest_init+0x135/0x140 [ 7858.221469] [<ffffffff81f83014>] start_kernel+0x50e/0x51b [ 7858.221670] [<ffffffff81f82120>] ? early_idt_handler_array+0x120/0x120 [ 7858.221894] [<ffffffff81f8243f>] x86_64_start_reservations+0x2a/0x2c [ 7858.222113] [<ffffffff81f8257c>] x86_64_start_kernel+0x13b/0x14a Fixes: 2942e9005056 ("[RTNETLINK]: Use rtnl_unicast() for rtnetlink unicasts") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-25fault_in_multipages_readable() throws set-but-unused errorDave Chinner
When building XFS with -Werror, it now fails with: include/linux/pagemap.h: In function 'fault_in_multipages_readable': include/linux/pagemap.h:602:16: error: variable 'c' set but not used [-Werror=unused-but-set-variable] volatile char c; ^ This is a regression caused by commit e23d4159b109 ("fix fault_in_multipages_...() on architectures with no-op access_ok()"). Fix it by re-adding the "(void)c" trick taht was previously used to make the compiler think the variable is used. Signed-off-by: Dave Chinner <dchinner@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-25Merge branch 'master' of ↵Pablo Neira Ayuso
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next Conflicts: net/netfilter/core.c net/netfilter/nf_tables_netdev.c Resolve two conflicts before pull request for David's net-next tree: 1) Between c73c24849011 ("netfilter: nf_tables_netdev: remove redundant ip_hdr assignment") from the net tree and commit ddc8b6027ad0 ("netfilter: introduce nft_set_pktinfo_{ipv4, ipv6}_validate()"). 2) Between e8bffe0cf964 ("net: Add _nf_(un)register_hooks symbols") and Aaron Conole's patches to replace list_head with single linked list. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-09-25netfilter: nft_log: complete NFTA_LOG_FLAGS attr supportLiping Zhang
NFTA_LOG_FLAGS attribute is already supported, but the related NF_LOG_XXX flags are not exposed to the userspace. So we cannot explicitly enable log flags to log uid, tcp sequence, ip options and so on, i.e. such rule "nft add rule filter output log uid" is not supported yet. So move NF_LOG_XXX macro definitions to the uapi/../nf_log.h. In order to keep consistent with other modules, change NF_LOG_MASK to refer to all supported log flags. On the other hand, add a new NF_LOG_DEFAULT_MASK to refer to the original default log flags. Finally, if user specify the unsupported log flags or NFTA_LOG_GROUP and NFTA_LOG_FLAGS are set at the same time, report EINVAL to the userspace. Signed-off-by: Liping Zhang <liping.zhang@spreadtrum.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-09-25netfilter: nf_tables: add range expressionPablo Neira Ayuso
Inverse ranges != [a,b] are not currently possible because rules are composites of && operations, and we need to express this: data < a || data > b This patch adds a new range expression. Positive ranges can be already through two cmp expressions: cmp(sreg, data, >=) cmp(sreg, data, <=) This new range expression provides an alternative way to express this. Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-09-25ALSA: control: cage TLV_DB_RANGE_HEAD in kernel land because it was obsoletedTakashi Sakamoto
In commit bf1d1c9b6179 ("ALSA: tlv: add DECLARE_TLV_DB_RANGE()"), the new macro was added so that "dB range information can be specified without having to count the items manually for TLV_DB_RANGE_HEAD()". In short, TLV_DB_RANGE_HEAD macro was obsoleted. In commit 46e860f76804 ("ALSA: rename TLV-related macros so that they're friendly to user applications"), TLV-related macros are exposed for applications in user land to get content of data structured by Type/Length/Value shape. The commit managed to expose TLV-related macros as many as possible, while obsoleted TLV_DB_RANGE_HEAD() was included to the list of exposed macros. This situation brings some confusions to application developers because they might think all exposed macros have their own purpose and useful for applications. For the reason, this commit moves TLV_DB_RANGE_HEAD macro from UAPI header to a header for kernel land, again. The above commit is done within the same development period for kernel 4.9, thus not published yet. This commit might certainly brings no confusions to user land. Reference: commit bf1d1c9b6179 ("ALSA: tlv: add DECLARE_TLV_DB_RANGE()") Reference: commit 46e860f76804 ("ALSA: rename TLV-related macros so that they're friendly to user applications") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-09-25netfilter: xt_hashlimit: Create revision 2 to support higher pps ratesVishwanath Pai
Create a new revision for the hashlimit iptables extension module. Rev 2 will support higher pps of upto 1 million, Version 1 supports only 10k. To support this we have to increase the size of the variables avg and burst in hashlimit_cfg to 64-bit. Create two new structs hashlimit_cfg2 and xt_hashlimit_mtinfo2 and also create newer versions of all the functions for match, checkentry and destroy. Some of the functions like hashlimit_mt, hashlimit_mt_check etc are very similar in both rev1 and rev2 with only minor changes, so I have split those functions and moved all the common code to a *_common function. Signed-off-by: Vishwanath Pai <vpai@akamai.com> Signed-off-by: Joshua Hunt <johunt@akamai.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-09-25netfilter: replace list_head with single linked listAaron Conole
The netfilter hook list never uses the prev pointer, and so can be trimmed to be a simple singly-linked list. In addition to having a more light weight structure for hook traversal, struct net becomes 5568 bytes (down from 6400) and struct net_device becomes 2176 bytes (down from 2240). Signed-off-by: Aaron Conole <aconole@bytheb.org> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-09-25soc/fsl: Introduce DPAA 1.x QMan device driverClaudiu Manoil
This driver enables the Freescale DPAA 1.x Queue Manager block. QMan is a hardware accelerator that manages frame queues. It allows CPUs and other accelerators connected to the SoC datapath to enqueue and dequeue ethernet frames, thus providing the infrastructure for data exchange among CPUs and datapath accelerators. Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Scott Wood <oss@buserror.net>
2016-09-25soc/fsl: Introduce DPAA 1.x BMan device driverClaudiu Manoil
This driver enables the Freescale DPAA 1.x Buffer Manager block. BMan is a hardware accelerator that manages buffer pools. It allows CPUs and other accelerators connected to the SoC datapath to acquire and release buffers during data processing. Signed-off-by: Roy Pledge <roy.pledge@nxp.com> Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: Scott Wood <oss@buserror.net>
2016-09-25netfilter: nf_queue: whitespace cleanupAaron Conole
A future patch will modify the hook drop and outfn functions. This will cause the line lengths to take up too much space. This is simply a readability change. Signed-off-by: Aaron Conole <aconole@bytheb.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-09-24rxrpc: Implement slow-startDavid Howells
Implement RxRPC slow-start, which is similar to RFC 5681 for TCP. A tracepoint is added to log the state of the congestion management algorithm and the decisions it makes. Notes: (1) Since we send fixed-size DATA packets (apart from the final packet in each phase), counters and calculations are in terms of packets rather than bytes. (2) The ACK packet carries the equivalent of TCP SACK. (3) The FLIGHT_SIZE calculation in RFC 5681 doesn't seem particularly suited to SACK of a small number of packets. It seems that, almost inevitably, by the time three 'duplicate' ACKs have been seen, we have narrowed the loss down to one or two missing packets, and the FLIGHT_SIZE calculation ends up as 2. (4) In rxrpc_resend(), if there was no data that apparently needed retransmission, we transmit a PING ACK to ask the peer to tell us what its Rx window state is. Signed-off-by: David Howells <dhowells@redhat.com>
2016-09-24netfilter: call nf_hook_state_init with rcu_read_lock heldFlorian Westphal
This makes things simpler because we can store the head of the list in the nf_state structure without worrying about concurrent add/delete of hook elements from the list. A future commit will make use of this to implement a simpler linked-list. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Aaron Conole <aconole@bytheb.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-09-24netfilter: bridge: add and use br_nf_hook_threshFlorian Westphal
This replaces the last uses of NF_HOOK_THRESH(). Followup patch will remove it and rename nf_hook_thresh. The reason is that inet (non-bridge) netfilter no longer invokes the hooks from hooks, so we do no longer need the thresh value to skip hooks with a lower priority. The bridge netfilter however may need to do this. br_nf_hook_thresh is a wrapper that is supposed to do this, i.e. only call hooks with a priority that exceeds NF_BR_PRI_BRNF. It's used only in the recursion cases of br_netfilter. It invokes nf_hook_slow while holding an rcu read-side critical section to make a future cleanup simpler. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Aaron Conole <aconole@bytheb.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2016-09-24ASoC: rt5660: add rt5660 codec driverOder Chiou
This is the initial codec driver for rt5660 Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-09-24Merge tag 'rxrpc-rewrite-20160923' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs David Howells says: ==================== rxrpc: Bug fixes and tracepoints Here are a bunch of bug fixes: (1) Need to set the timestamp on a Tx packet before queueing it to avoid trouble with the retransmission function. (2) Don't send an ACK at the end of the service reply transmission; it's the responsibility of the client to send an ACK to close the call. The service can resend the last DATA packet or send a PING ACK. (3) Wake sendmsg() on abnormal call termination. (4) Use ktime_add_ms() not ktime_add_ns() to add millisecond offsets. (5) Use before_eq() & co. to compare serial numbers (which may wrap). (6) Start the resend timer on DATA packet transmission. (7) Don't accidentally cancel a retransmission upon receiving a NACK. (8) Fix the call timer setting function to deal with timeouts that are now or past. (9) Don't use a flag to communicate the presence of the last packet in the Tx buffer from sendmsg to the input routines where ACK and DATA reception is handled. The problem is that there's a window between queueing the last packet for transmission and setting the flag in which ACKs or reply DATA packets can arrive, causing apparent state machine violation issues. Instead use the annotation buffer to mark the last packet and pick up and set the flag in the input routines. (10) Don't call the tx_ack tracepoint and don't allocate a serial number if someone else nicked the ACK we were about to transmit. There are also new tracepoints and one altered tracepoint used to track down the above bugs: (11) Call timer tracepoint. (12) Data Tx tracepoint (and adjustments to ACK tracepoint). (13) Injected Rx packet loss tracepoint. (14) Ack proposal tracepoint. (15) Retransmission selection tracepoint. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-24Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2016-09-23 Only two patches this time: 1) Fix a comment reference to struct xfrm_replay_state_esn. From Richard Guy Briggs. 2) Convert xfrm_state_lookup to rcu, we don't need the xfrm_state_lock anymore in the input path. From Florian Westphal. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-24net/mlx4: Add VF vlan protocol 802.1ad supportMoshe Shemesh
Move the vf to VST 802.1ad mode (mlx4 VST QinQ mode) by setting vf vlan protocol to 802.1ad. VST 802.1ad mode in mlx4, is used for STAG strip/insertion by PF, while the CTAG is set by the VF. Read current vlan protocol as part of the vf configuration state. Upon setting vf vlan protocol to 802.1ad, we use a mechanism of handshake to verify that both the vf and the pf driver version support it. The handshake uses the command QUERY_FUNC_CAP: - The vf sets a pre-defined support bit in input modifier. - A pf that supports the feature sends the request to the vf through a pre-defined field in the output mailbox. - In case vf does not support the feature, the pf will fail the control command (in this case, IP link tool command to set the vf vlan protocol to 802.1ad). No change in VST 802.1Q mode. Signed-off-by: Moshe Shemesh <moshe@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-12 17:33:49 +0000